33KV Gantry Structure

STRUCTURAL DESIGN CALCULATIONS OF 33KV DOUBLE CIRCUIT
GANTRY (Area of Conductor =265Sq.mm)
REPORT PREPARED FOR:
ELECTRICITY COMPANY OF GHANA LIMITED
REPORT PREPARED BY:
ARVENSIS ENERGY PRIVATE LIMMITED

FOR
DELOVELY COMPANY LIMITED
CLIENT Electricity Company of Ghana limited DATE 03/02/2022
PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

NAME KPANDO TO HOHOE AND KADJEBI TO HOHOE SUBSTATIONS IN THE VOLTA REV 01
REGION.
1

REGION.
Table of Contents
1. DESIGN PARAMETERS ......................................................................................................... 3
2. INDEX OF LOADINGS............................................................................................................ 5
3. SAG TENSION CALCULATIONS .......................................................................................... 7
4. LOAD CALCULATIONS ....................................................................................................... 10
5. WIND LOAD ON GANTRY STRUCTURE .......................................................................... 17
6. DESIGN CALCULATIONS ................................................................................................... 22
7. FOUNDATION FORCES: ...................................................................................................... 25
8. SINGLE LINE DRAWING ..................................................................................................... 27
2

REGION.
1. DESIGN PARAMETERS
1.GENERAL
1. VOLTAGE/CIRCUIT 33KV (DOUBLE CIRCUIT)

2. TOWER CONFIGURATION HORIZONTAL
3.NO. OF EARTHWIRE ONE (OPGW)
4.NO. OF CONDUCTORS ONE PER PHASE
2) SPAN DETAILS (in meters)
NORMAL SPAN: 170m

WIND SPAN:
NC: 204m
BWC: 122m
WEIGHT SPAN:
MAX. WT. SPAN MIN. WT. OF SPAN
TOWER TYPE DE/DE90 DE/DE90
NC Max/ Min 290 0
BWC Max/Min 174 0
3) CONDUCTOR AND GROUNDWIRE PROPERTIES
CONDUCTOR
OVERALL DIAMETER - 21.1mm
CROSS SECTION AREA - 265 Sq.mm
WEIGHT - 0.731Kg/m
ULTIMATE TENSILE STRENGTH – 4119Kgs
MODULUS OF ELASTICITY - 6966Kg/Sq.mm
CO-EFFCIENT OF LINEAR EXPANSION - 23X10^-6 /  C
GROUNDWIRE (OPGW)
OVERALL DIAMETER - 16 mm
CROSS SECTION AREA - 58 Sq.mm
WEIGHT - 0.492 Kg/m
ULTIMATE TENSILE STRENGHT - 7322 Kgs
MODULUS OF ELASTICITY - 1211423 Kg/Sq.mm
CO-EFFCIENT OF LINEAR EXPANSION - 14.1X10^-6 /  C
3

REGION.
5) ELECTRICAL CLEARENCE:
MIN GROUND CLEARENCE 6000mm

HORIZONTAL CLEARENCE 2000mm
6) TOWER DESIGN DETAILS:
Leg Lattice X – Arm Redundant Ten. Memb

Main
Min. Thickness (mm) 5 4 5 4 5
KL/R 150 200 150 250 350
Steel Grade
Grade Yield (MPa)
Mid Steel BSEN 10025 S275 275
High Tensile BSEN 10025 S355 355
Bolts & Nuts

Dia Grade
16 5.8
7) WIND LOAD DETAILS
Wind Pressure = 680 N/sq.m
4
PROJECT
NAME CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM KPANDO TO HOHOE AND REV 01
KADJEBI TO HOHOE SUBSTATIONS IN THE VOLTA REGION.
2. INDEX OF LOADINGS
_________________________________________________________________________________________________________
Sl. Title Code Nature Category
_________________________________________________________________________________________________________
1 RELIABILITY NORMAL RN perm cate
2 SECURITY OPGW & TOP COND BROKEN SGB perm catb
3 SECURITY TOP & MIDD CONDUCTOR BROKEN STMB perm catb
4 SECURITY MIDDLE & BOTT CONDUCTOR BROKEN SMBB perm catb
5 SECURITY BOTTOM & TOP CONDUCTOR BROKEN SBTB perm catb
6 SAFETY NORMAL CONDITION SAN perm catn
7 DEAD END DE perm cate
5
PROJECT
SAG TENSION CALCULATIONS
6
PROJECT
3. SAG TENSION CALCULATIONS
DATA :-
Basic Span (m) : 170.00

Wind Pressure (kg/sq.m) : 69.34
CONDUCTOR DETAILS :-
Type : 265 sq.mm

Overall Diameter (cm) : 2.6
Cross Sectional Area (sq.cm) : 4
Unit Weight (kg/m) : 1.102
Ultimate Tensile strength (kg) : 6526
Coef. of Thermal Expansion(/degC) : 0.000023
Modulus of Elasticity (kg/sq.cm) : 560844
Increase in Vertical sag (%) : 0
Shape factor : 1
Gust factor : 1
Drag factor : 1
Basic Condition:-
Temperature (deg C) : 27.0000
Wind factor : .0000
Ice thickness (cm) : .0000
Factor of Safety : 5.000
SAG_TENSION_FOS COMPUTATIONS :
________________________________________________________________________________________________________________
Sl. Environmental Wind Ice Vertical Tension FOS REMARKS

No. Temperature (deg.C) Factor Thickness (cm) Sag (m) (Kg)
________________________________________________________________________________________________________________
1. 27.00 .0000 .00 3.050 1305.20 5.000

2. 27.00 1.0000 .00 1.892 2103.98 3.102
3. 85.00 .0000 .00 4.647 856.70 7.618
4. 40.00 1.0000 .00 2.059 1933.81 3.375
5. 10.00 1.0000 .00 1.671 2382.10 2.740
________________________________________________________________________________________________________________
Max Vertical Sag (m) : 4.647

Max Tension (kg) : 2382.10
7
PROJECT
DATA :-
Basic Span (m) : 170.00

Wind Pressure (kg/sq.m) : 69.34
SHIELD WIRE DETAILS :-
Type : OPGW
Overall Diameter (cm) : 1.6
Cross Sectional Area (sq.cm) : 1.27
Unit Weight (kg/m) : 0.615
Ultimate Tensile strength (kg) : 7036
Coef. of Thermal Expansion(/degC) : 0.0000185
Modulus of Elasticity (kg/sq.cm) : 958533
Increase in Vertical sag (%) : 0
Shape factor : 1
Gust factor : 1
Drag factor : 1
Basic Condition:-
Temperature (deg C) : 27.0000
Wind factor : .0000
Ice thickness (cm) : .0000
Factor of Safety : 8.6936
SAG_TENSION_FOS COMPUTATIONS :
________________________________________________________________________________________________________________
Sl. Environmental Wind Ice Vertical Tension FOS REMARKS

No. Temperature (deg.C) Factor Thickness (cm) Sag (m) (Kg)
________________________________________________________________________________________________________________
1. 27.00 .0000 .00 2.745 809.33 8.694 % GW/CON sag = 90.00

2. 27.00 1.0000 .00 1.685 1318.89 5.335 % GW/CON sag = 89.03
3. 53.00 .0000 .00 3.377 657.98 10.693 % GW/CON sag = 72.66
4. 40.00 1.0000 .00 1.807 1229.77 5.721 % GW/CON sag = 87.76
5. 10.00 1.0000 .00 1.525 1456.95 4.829 % GW/CON sag = 91.24
________________________________________________________________________________________________________________
Max Vertical Sag (m) : 3.377

Max Tension (kg) : 1456.95
8

NAME KPANDO TO HOHOE AND KADJEBI TO HOHOE SUBSTATIONS IN THE REV 01
VOLTA REGION.
CONDUCTOR AND GROUND WIRE LOAD CALCULATIONS
9

VOLTA REGION.
4. LOAD CALCULATIONS
DESIGN DATA
DESCRIPTION UNITS NC BWC ERECTION
SPANS :
WIND SPAN, Lwind m 204 122 122

WEIGHT SPAN ( MAX ), Lw1 m 290 174 174
WEIGHT SPAN ( MIN ), Lw2 m 0 0 0
WIND PRESSURES :
WIND PRESSURE ON CONDUCTOR, Pc Kg/m^2 70.8 28.3 17.7

WIND PRESSURE ON OPGW, Po Kg/m^2 70.8 28.3 17.7
WIND PRESSURE ON INSULATOR, Pi Kg/m^2 70.8 28.3 17.7
COND.,EW & INSULATORS :
DIA.OF.CONDUCTOR, Dc m 0.026 0.026 0.026

DIA.OF.OPGW, Do m 0.0155 0.0155 0.0155
DIA.OF.INSULATOR, Di m 0.25 0.25 0.25
LENGTH OF INSULATOR, Li m 0.99 0.99 0.99
NO OF SUB CONDUCTORS, Nc 1 1 1
NO OF INSULATOR SETS, Ni 1 1 1
WEIGHT OF CONDUCTOR, Wc Kg/m 1.16 1.16 1.16
WEIGHT OF INSULATOR PER SET, Wi Kg 81.58 81.58 81.58
WEIGHT OF OPGW, Wo Kg/m 0.887 0.887 0.887
TENSION OF WIRES :
TENSION OF CONDUCTOR, Tc Kg 470.8 298.6 276.6

TENSION OF OPGW, To Kg 438.25 313.75 300.5
TENSION DIFFERENCE OF CONDUCTOR, Tcd Kg 0 0 0
TENSION DIFFERENCE OF OPGW, Tod Kg 0 0 0
DEVIATION ANGLE - MAX. , Amax DEG 90 90 90

DEVIATION ANGLE - MIN., Amin DEG 60 60 60
LONG FACTOR FOR CONDUCTOR, Lf NIL 1 1 1
FACTOR OF SAFETY NIL 1 1 1
10

VOLTA REGION.
NORMAL CONDITION (WITH MAXIMUM WIND)
TRANSVERSE LOADS :
CONDUCTOR:-
WIND ON CONDUCTOR = 1 x 70.77 x 0.0260 x 204 = 376 =Nc*Pc* Dc*Lwind
WIND ON INSULATOR = = 61 =61
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 470.8 x 1 = 666 =2*Nc*sin(Amax/2)* Tc
TOTAL TRANSVERSE LOAD = = 1104 Kg
EARTH WIRE:-
WIND ON EARTH WIRE = 1 x 70.77 x 0.0155 x 204 = 224 =1*Po*Do*Lwind
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 438.25 x 1 = 620 =2*sin(Amax/2)*To
TOTAL TRANSVERSE LOAD = 844 Kg
VERTICAL LOADS :
CONDUCTOR:- MAX MIN

WEIGHT OF CONDUCTOR = 1 x 290 x 1.16 = 337 0 =Nc*Lw1*Wc
WEIGHT OF INSULATOR = 1 x 81.58 = 82 82 =Ni*Wi
WEIGHT OF LIGHTENING
ARRESTOR = 31 31
WEIGHT OF ISOLATOR = 102 102
WEIGHT OF THREE PHASE
SEALING = 102 102
WEIGHT OF LINE TRAP = 0 0
OTHER LOADS = 0 0
TOTAL VERTICAL LOAD = 654 317
EARTH WIRE:- MAX MIN

WEIGHT OF EARTH WIRE = 1 x 290 x 0.887 = 258 0 =1*Lw1*Wo
TOTAL VERTICAL LOAD = = 258 0
LONGITUDINAL LOADS :-
CONDUCTOR:-
LONGITUDINAL LOAD OF =Nc*Tcd*Lf
CONDUCTOR = 1 x 0 x 1 = 0 Kg
EARTH WIRE:-
LONGITUDINAL LOAD OF =Ni*Tod*Lf
EARTH WIRE = 1 x 0 = 0 Kg
Note: FOS for this load case is 2.0
11

VOLTA REGION.
SECURITY NORMAL CONDITION
TRANSVERSE LOADS :
CONDUCTOR:-
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 298.6 x 1 = 423 =2*Nc*sin(Amax/2)* Tc
EARTH WIRE:-
VERTICAL LOADS :
CONDUCTOR:- MAX MIN

WEIGHT OF LIGHTENING ARRESTOR = 31 31
WEIGHT OF THREE PHASE SEALING = 102 102
OTHER LOADS = 0 255

WEIGHT OF EARTH WIRE = 1 x 290 x 0.887 = 258 0
CONDUCTOR:-
LONGITUDINAL LOAD OF
CONDUCTOR = 1 x 0 x 0.866 = 0 Kg
EARTH WIRE:-
LONGITUDINAL LOAD OF EARTH

WIRE = 1 x 0 x 0.866 = 0 Kg
12

VOLTA REGION.
SECURITY BROKEN WIRE CONDITION
TRANSVERSE LOADS :
CONDUCTOR:-
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 298.6 x 0.5 = 212 =2*Nc*sin(Amax/2)* Tc
EARTH WIRE:-
WIND ON EARTH WIRE = 1 x 28.31 x 0.0155 x 122.4 = 54 =1*Po*Do*Lwind
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 313.75 x 0.5 = 222 =2*sin(Amax/2)*To
VERTICAL LOADS :
CONDUCTOR:- MAX MIN

ARRESTOR = 31 31
SEALING = 102 102
OTHER LOADS = 0 255

CONDUCTOR:-
LONGITUDINAL LOAD OF =Nc*Tcd*Cos(Amin/2)*Lf
CONDUCTOR = 1 x 298.6 x 0.866 x 1 = 259 Kg
EARTH WIRE:-
LONGITUDINAL LOAD OF EARTH =1*Tod*Cos(Amin/2)*Lf
WIRE = 1 x 313.8 x 0.866 x 1 = 272 Kg
13

VOLTA REGION.
ERECTION & MAINTENANCE LOADS
TRANSVERSE LOADS :
CONDUCTOR:-
WIND ON INSULATOR = = 61
=2*Nc*sin(Amax/2)*
DUE TO ANGLE OF DEVIATION = 2 x 0.707 x 276.6 x 1 = 392 Tc
EARTH WIRE:-
VERTICAL LOADS :
CONDUCTOR:- MAX
WEIGHT OF CONDUCTOR = 1 x 290 x 1.16 x 2 = 673 =Nc*Lwind*Wc*2
WEIGHT OF INSULATOR = 1 x 81.58 x 2 = 164 =Ni*Wi*2
= 357
ERECTION LOADS = 153
ARRESTOR = 31
WEIGHT OF ISOLATOR = 102
WEIGHT OF THREE PHASE SEALING = 102
WEIGHT OF LINE TRAP = 0
OTHER LOADS = 0
TOTAL VERTICAL LOAD = = 1581
EARTH WIRE:- MAX

WEIGHT OF EARTH WIRE = 1 x 290 x 0.887 x 2 = 515 =1*Lw1*Wo
TOTAL VERTICAL LOAD = = 515
CONDUCTOR:-
LONGITUDINAL LOAD OF
CONDUCTOR = = 0 Kg
EARTH WIRE:-
LONGITUDINAL LOAD OF EARTH
WIRE = = 0 Kg
14

VOLTA REGION.
DEAD END CONDITION
TRANSVERSE LOADS :
CONDUCTOR:-
DUE TO ANGLE OF
DEVIATION = 1 x 0 x 1493 x 1 = 0 =2*Nc*sin(Amax/2)* Tc
EARTH WIRE:-
WIND ON EARTH WIRE = 1 x 28.31 x 0.0155 x 122.4 = 54
DUE TO ANGLE OF
DEVIATION = 1 x 0 x 1255 x 1 = 0 =1*Po*Do*Lwind
TOTAL TRANSVERSE LOAD = 54 Kg =2*sin(Amax/2)*To
VERTICAL LOADS :
CONDUCTOR:- MAX MIN

ARRESTOR = 31 31
SEALING = 102 102
OTHER LOADS = 255 255

CONDUCTOR:-
LONGITUDINAL LOAD OF =Nc*Tcd*Cos(Amin/2)*Lf
CONDUCTOR = 1 x 2354 x 1 x 1 = 2354 Kg
EARTH WIRE:-
LONGITUDINAL LOAD OF =1*Tod*Cos(Amin/2)*Lf
EARTH WIRE = 1 x 1753 x 1 x 1 = 1753 Kg
15

VOLTA REGION.
WIND ON GANTRY BODY
16

VOLTA REGION.
5. WIND LOAD ON GANTRY STRUCTURE

BASIC BODY
Point Loads for Load Case "RN : NORMAL CONDITION MAX WIND":
Joint Vertical Transverse Longitudinal Load

Label Load Load Load Comment
(N) (N) (N)
-----------------------------------------------
T1XY 12827 21653 0
T2XY 12827 21653 0
T3XY 12827 21653 0
T1X 12827 21653 0
T2X 12827 21653 0
T3X 12827 21653 0
Section Load Case Information (Standard) for "RN : NORMAL CONDITION MAX WIND":
Section Z Z Ave. Res. Tran Tran Tran Long Long Long Ice Total
Label of of Elev. Adj. Adj. Drag Wind Adj. Drag Wind Weight Weight
Top Bottom Above Wind Wind Coef Load Wind Coef Load
Ground Pres. Pres. Pres.
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
----------------------------------------------------------------------------------------
3 10.50 7.95 9.22 1388.00 1388.00 1.000 6232.2 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 1388.00 1388.00 1.000 4780.7 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 1388.00 1388.00 1.000 3920.5 0.00 1.000 0.0 0 6149
Point Loads for Load Case "ERR - ERECTION & MAINTENANCE LOADING":

(N) (N) (N)
-----------------------------------------------
T1XY 5000 12592 0
T2XY 5000 12592 0
T3XY 5000 12592 0
T1X 5000 12592 0
T2X 5000 12592 0
T3X 5000 12592 0
Section Load Case Information (Standard) for "ERR - ERECTION & MAINTENANCE LOADING":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
Point Loads for Load Case "RND - NORMAL CONDITION FOR DEFLECTION":

(N) (N) (N)
-----------------------------------------------
T1XY 11415 12464.5 0
T2XY 11415 12464.5 0
T3XY 11415 12464.5 0
T1X 11415 12464.5 0
T2X 11415 12464.5 0
T3X 11415 12464.5 0
Section Load Case Information (Standard) for "RND - NORMAL CONDITION FOR DEFLECTION":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
17

VOLTA REGION.
3 10.50 7.95 9.22 694.00 694.00 1.000 3116.1 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 694.00 694.00 1.000 2390.3 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 694.00 694.00 1.000 1960.2 0.00 1.000 0.0 0 6149
Point Loads for Load Case "SB1 - SECURITY BROKEN WIRE CONDITION - 1ST CONDUCTOR":

(N) (N) (N)
-----------------------------------------------
T1XY 15137 6134 4766
T2XY 17122 10900 0
T3XY 17122 10900 0
T1X 17122 10900 0
T2X 17122 10900 0
T3X 17122 10900 0
Section Load Case Information (Standard) for "SB1 - SECURITY BROKEN WIRE CONDITION - 1ST CONDUCTOR":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
Point Loads for Load Case "SB2 - SECURITY BROKEN WIRE CONDITION - 2ND CONDUCTOR":

(N) (N) (N)
-----------------------------------------------
T1XY 17122 10900 0
T2XY 15137 6134 4766
T3XY 17122 10900 0
T1X 17122 10900 0
T2X 17122 10900 0
T3X 17122 10900 0
Section Load Case Information (Standard) for "SB2 - SECURITY BROKEN WIRE CONDITION - 2ND CONDUCTOR":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
Point Loads for Load Case "SB3 - SECURITY BROKEN WIRE CONDITION - 3RD CONDUCTOR":

(N) (N) (N)
-----------------------------------------------
T1XY 17122 10900 0
T2XY 17122 10900 0
T3XY 15137 6134 4766
T1X 17122 10900 0
T2X 17122 10900 0
T3X 17122 10900 0
Section Load Case Information (Standard) for "SB3 - SECURITY BROKEN WIRE CONDITION - 3RD CONDUCTOR":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
18

VOLTA REGION.
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
Point Loads for Load Case "SB4 - SECURITY BROKEN WIRE CONDITION - 4TH CONDUCTOR":

(N) (N) (N)
-----------------------------------------------
T1XY 17122 10900 0
T2XY 17122 10900 0
T3XY 17122 10900 0
T1X 15137 6134 4766
T2X 17122 10900 0
T3X 17122 10900 0
Section Load Case Information (Standard) for "SB4 - SECURITY BROKEN WIRE CONDITION - 4TH CONDUCTOR":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149

(N) (N) (N)
-----------------------------------------------
T1XY 17122 10900 0
T2XY 17122 10900 0
T3XY 17122 10900 0
T1X 17122 10900 0
T2X 15137 6134 4766
T3X 17122 10900 0
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149

(N) (N) (N)
-----------------------------------------------
T1XY 17122 10900 0
T2XY 17122 10900 0
T3XY 17122 10900 0
T1X 17122 10900 0
T2X 17122 10900 0
T3X 15137 6134 4766
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
19

VOLTA REGION.
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
Point Loads for Load Case "SECURITY BROKEN WIRE CONDITION ALL CONDUCTORS":

(N) (N) (N)
-----------------------------------------------
T1XY 15137 6134 4766
T2XY 15137 6134 4766
T3XY 15137 6134 4766
T1X 15137 6134 4766
T2X 15137 6134 4766
T3X 15137 6134 4766
Section Load Case Information (Standard) for "SECURITY BROKEN WIRE CONDITION ALL CONDUCTORS":
(m) (m) (m) (Pa) (Pa) (N) (Pa) (N) (N) (N)
--------------------------------------------------------------------------------------
3 10.50 7.95 9.22 416.40 416.40 1.000 1869.7 0.00 1.000 0.0 0 10319
2 7.95 3.50 5.72 416.40 416.40 1.000 1434.2 0.00 1.000 0.0 0 7380
1 3.50 0.00 1.75 416.40 416.40 1.000 1176.1 0.00 1.000 0.0 0 6149
20
PROJECT NAME CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM KPANDO TO HOHOE AND REV 01
DESIGN CALCULATIONS
21
PROJECT
NAME CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM KPANDO TO HOHOE AND KADJEBI TO HOHOE REV 01
SUBSTATIONS IN THE VOLTA REGION.
6. DESIGN CALCULATIONS
Group Summary (Compression Portion):
Comp. Comp.
Max Comp.
Steel Max Usage Comp. Comp. L/r Connect. Connect. No. Of
Group Angle Angle Use In Control Curve
Row Strength Usage Cont- Control Force Capacity Shear Bearing RLX RLY RLZ L/r KL/r Bolts
Label Type Size Comp. Load No.
(MPa) % rol Member (kN) (kN) Capacity Capacity Comp.
% Case
(kN) (kN)
1 L1 SAE 90*90*6 355 84.96 Comp 84.96 g1Y -237.895 RN 280.024 314.1 361.267 2 1 1 36.17 36.17 1 4
2 L2 SAE 90*90*6 355 82.18 Comp 82.18 g2Y -193.59 RN 280.671 235.575 270.95 2 1 1 35.7 35.7 1 3
3 L3 SAE 60*60*5 355 1.16 Comp 1.16 g315P -1.279 SBWC 109.983 157.05 150.528 0.5 0.5 0.5 82.55 82.55 1 2
4 D1 SAE 45*45*5 275 58.1 Comp 58.1 g23R -22.813 RN 51.993 39.263 62.976 1 1 1 100.92 110.46 3 1
5 D2 SAE 45*45*5 275 87.35 Comp 87.35 g108P -34.298 RN 52.803 39.263 62.976 1 1 1 98.51 109.25 3 1
6 H1 SAE 80*80*6 275 75.81 Comp 75.81 FFg206X -89.299 RN 156.471 117.788 226.714 1 1 1 42.47 81.23 3 3
7 H2 SAE 45*45*5 275 29.09 Comp 29.09 g220P -11.422 RN 58.958 39.263 62.976 1 1 1 80.46 100.23 3 1
8 H3 SAE 45*45*5 275 5.96 Comp 5.96 g236X -2.342 RN 58.958 39.263 62.976 1 1 1 80.46 100.23 3 1
9 H4 SAE 45*45*5 275 84.76 Comp 84.76 g240P -33.28 RN 58.958 39.263 62.976 1 1 1 80.46 100.23 3 1
10 H5 SAE 45*45*5 275 73.03 Comp 73.03 g273P -35.58 SBWC 48.724 78.525 125.952 1 1 1 110.78 115.39 3 2
11 HR1 SAE 45*45*5 275 19.75 Comp 19.75 g308P -7.756 RN 47.742 39.263 62.976 1 1 1 113.79 116.89 3 1
22
PROJECT
NAME CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM KPANDO TO HOHOE AND KADJEBI TO HOHOE REV 01
SUBSTATIONS IN THE VOLTA REGION.
Group Summary (Tension Portion):
Tension Tension
Tension Net Length
Steel Max Usage Max Tension Tension Connect. Connect. No. Of Hole
Group Angle Angle Control Section Tens. No. Of
Row Strength Usage Cont- Use In Control Force Shear Bearing Bolts Diameter
Label Type Size Load Capacity Member Holes
(MPa) % rol Tens. % Member (kN) Capacity Capacity Tens. (cm)
Case (kN) (m)
(kN) (kN)
1 L1 SAE 90*90*6 355 84.96 Comp 67.51 g1X 212.036 RN 335.475 314.1 361.267 0.501 4 1 1.75
2 L2 SAE 90*90*6 355 82.18 Comp 72 g2X 169.619 RN 335.475 235.575 270.95 0.494 3 1 1.75
3 L3 SAE 60*60*5 355 1.16 Comp 0.74 g315X 1.121 SBWC 179.156 157.05 150.528 1.915 2 1 1.75
4 D1 SAE 45*45*5 275 58.1 Comp 54.13 g23P 21.253 RN 78.528 39.263 62.976 0.878 1 1 1.75
5 D2 SAE 45*45*5 275 87.35 Comp 86.65 g109P 34.022 RN 78.528 39.263 62.976 0.857 1 1 1.75
6 H1 SAE 80*80*6 275 75.81 Comp 51.01 Fg206214P 60.086 RN 190.035 117.788 226.714 0.662 3 1 1.75
7 H2 SAE 45*45*5 275 29.09 Comp 15.55 g218P 6.104 RN 78.528 39.263 62.976 0.7 1 1 1.75
8 H3 SAE 45*45*5 275 5.96 Comp 5.57 g236P 2.188 RN 78.528 39.263 62.976 0.7 1 1 1.75
9 H4 SAE 45*45*5 275 84.76 Comp 47.71 g266P 18.734 RN 78.528 39.263 62.976 0.7 1 1 1.75
10 H5 SAE 45*45*5 275 73.03 Comp 55.1 g275P 43.267 RN 78.528 78.525 125.952 0.964 2 1 1.75
11 HR1 SAE 45*45*5 275 19.75 Comp 16.15 g305P 6.34 RN 78.528 39.263 62.976 0.99 1 1 1.75
23

VOLTA REGION.
FOUNDATION FORCES
24

VOLTA REGION.
7. FOUNDATION FORCES:
NORMAL TOWER:-
NORMAL CONDITION:-
TYPE OF FORCE UNIT(kgs)

COMPRESSION 2340.955
UPLIFT 2087.25
LONGITUDINAL SHEAR 98.93
TRANSVERSE SHEAR 135.73
NOTE: 1) ALL THE ABOVE FORCES ARE IN KGS WITHOUT FOS.

2) COMPRESSION AND UPLIFT ARE ALONG THE TOWER SLOPE.
BROKEN WIRE CONDITION:
NORMAL TOWER:-
TYPE OF FORCE UNIT(kgs)

COMPRESSION 1366.36
UPLIFT 1186.73
LONGITUDINAL SHEAR 56.59
TRANSVERSE SHEAR 80.71
NOTE: 1) ALL THE ABOVE FORCES ARE IN KGS WITHOUT FOS.

2) COMPRESSION AND UPLIFT ARE ALONG THE TOWER SLOPE.
25

VOLTA REGION.
SINGLE LINE DRAWING
26

VOLTA REGION.
8. SINGLE LINE DRAWING
4
1
A
A
B
B
C
C
D
C L IE N T :
E le c t r ic it y C o m p a n y o f G h a n a L im it e d , G h a n a
PRO JECT :
C USTO M ER :
D E L O V E L Y C O M P A N Y L IM IT E D , G H A N A
M ANU FA CTURER:
M / s . A R V E N S IS E N E R G Y P R IV A T E L IM IT E D .
K o l lu r i H o u s e ,# 8 - 3 - 3 1 8 / 1 1 /3 ,P l o t N o . 3 , J a ip r a k a s h N a g a r ,
Y e l la r e d d y g u d a , A m e e r p e t , H y d e r a b a d - 5 0 0 0 7 3 ,T e l a n g a n a ,I n d ia .
E
D E S IG N VASU 0 1 . 0 2 .2 2 D e s c r i p t io n : S CALE
D RA W N P R A T H A P 0 2 .0 2 . 2 2 33K V GA NT RY STR U C TU R E NTS
C H E C KE D
A P PR O V ED
P R A T H A P 0 2 .0 2 . 2 2
M U THU 0 2 .0 2 . 2 2
F O R D O U B L E C IR C U IT S HEET
1 OF 1
S IZ E REV
D R G . No.
A3 0
R EL E A S E D FO R P R E L I M IN A R Y TENDER I N F O R M A T IO N A PPRO VAL C O N S T R U C T IO N

1
27

33KV Gantry Structure

Uploaded by

Copyright:

Available Formats

33KV Gantry Structure

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

33KV Gantry Structure

Uploaded by

Copyright:

Available Formats

What is the project about?

What is the project about?

What design parameters are considered?

What design parameters are considered?

STRUCTURAL DESIGN CALCULATIONS OF 33KV DOUBLE CIRCUIT

GANTRY (Area of Conductor =265Sq.mm)

REPORT PREPARED FOR:

ELECTRICITY COMPANY OF GHANA LIMITED

REPORT PREPARED BY:

ARVENSIS ENERGY PRIVATE LIMMITED

CLIENT Electricity Company of Ghana limited DATE 03/02/2022

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

1. DESIGN PARAMETERS ......................................................................................................... 3

3. SAG TENSION CALCULATIONS .......................................................................................... 7

4. LOAD CALCULATIONS ....................................................................................................... 10

5. WIND LOAD ON GANTRY STRUCTURE .......................................................................... 17

6. DESIGN CALCULATIONS ................................................................................................... 22

7. FOUNDATION FORCES: ...................................................................................................... 25

8. SINGLE LINE DRAWING ..................................................................................................... 27

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

1. VOLTAGE/CIRCUIT 33KV (DOUBLE CIRCUIT)

2) SPAN DETAILS (in meters)

NORMAL SPAN: 170m

3) CONDUCTOR AND GROUNDWIRE PROPERTIES

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

MIN GROUND CLEARENCE 6000mm

6) TOWER DESIGN DETAILS:

Leg Lattice X – Arm Redundant Ten. Memb

Bolts & Nuts

7) WIND LOAD DETAILS

Wind Pressure = 680 N/sq.m

SAG TENSION CALCULATIONS

3. SAG TENSION CALCULATIONS

Basic Span (m) : 170.00

Type : 265 sq.mm

Sl. Environmental Wind Ice Vertical Tension FOS REMARKS

1. 27.00 .0000 .00 3.050 1305.20 5.000

Max Vertical Sag (m) : 4.647

Basic Span (m) : 170.00

SHIELD WIRE DETAILS :-

Sl. Environmental Wind Ice Vertical Tension FOS REMARKS

1. 27.00 .0000 .00 2.745 809.33 8.694 % GW/CON sag = 90.00

Max Vertical Sag (m) : 3.377

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

CONDUCTOR AND GROUND WIRE LOAD CALCULATIONS

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

WIND SPAN, Lwind m 204 122 122

WIND PRESSURE ON CONDUCTOR, Pc Kg/m^2 70.8 28.3 17.7

COND.,EW & INSULATORS :

DIA.OF.CONDUCTOR, Dc m 0.026 0.026 0.026

TENSION OF CONDUCTOR, Tc Kg 470.8 298.6 276.6

DEVIATION ANGLE - MAX. , Amax DEG 90 90 90

PROJECT CONSTRUCTION OF 2X40MVA 33kv ON A DOUBLE CIRCUIT TOWER FROM

NORMAL CONDITION (WITH MAXIMUM WIND)

CONDUCTOR:- MAX MIN

EARTH WIRE:- MAX MIN

Note: FOS for this load case is 2.0