Indian Standard: IS 11239 (Part 4) : 2014 ISO 1663: 2007

IS 11239 (Part 4) : 2014
ISO 1663 : 2007

Indian Standard
ICS 83.100
© BIS 2014
BUREAU OF INDIAN STANDARDS

9 110002
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI-110002
www.bis.org.in www.standardsbis.in
November 2014 Price Group 7

Thermal Insulation Sectional Committee, CHD 27
NATIONAL FOREWORD
This Indian Standard ( Part 4 ) ( First Revision ) which is identical with ISO 1663 : 2007 ‘Rigid cellular
plastics — Determination of water vapour transmission properties’ issued by the International
Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the
recommendation of the Thermal Insulation Sectional Committee and approval of the Chemical Division
Council.
This standard was originally published in 1985. This revision of the standard has been taken up to
align it with ISO 1663 : 2007 by adoption under dual numbering system.
The text of ISO Standard has been approved as suitable for publication as an Indian Standard without
deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention
is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should be
read as ‘Indian Standard’.
b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice
is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to the following International Standard for which Indian
Standard also exists. The corresponding Indian Standard which is to be substituted in its place, is
listed below, along with its degree of equivalence for the edition indicated:
ISO 1923 : 1981 Cellular plastics and IS 11239 (Part 1) : 2009 Method of test Identical
rubbers — Determination of linear for rigid cellular thermal insulation
dimensions materials: Part 1 dimensions (
)
The technical committee has reviewed the provisions of the following International Standards referred
in this adopted standard and has decided that they are acceptable for use in conjunction with this
standard:
ISO 291 : 2008 Plastics — Standard atmospheres for conditioning and testing
ISO 483 : 2005 Plastics — Small enclosures for conditioning and testing using aqueous
solutions to maintain the humidity at a constant value
In reporting the result of a test or analysis made in accordance with this standard, if the final value,
observed or calculated, is to be rounded off, it shall be done in accordance with IS 2 : 1960 ‘Rules for
rounding off numerical values ( )’.
Indian Standard
( First Revision )
Bureau of Indian Standards
BIS is a statutory institution established under the , 1986 to promote

harmonious development of the activities of standardization, marking and quality certification of goods
and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form
without the prior permission in writing of BIS. This does not preclude the free use, in course of implementing
the standard, of necessary details, such as symbols and sizes, type or grade designations. Enquiries
relating to copyright be addressed to the Director (Publications), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are also
reviewed periodically; a standard along with amendments is reaffirmed when such review indicates that
no changes are needed; if the review indicates that changes are needed, it is taken up for revision. Users
of Indian Standards should ascertain that they are in possession of the latest amendments or edition by
referring to the latest issue of ‘BIS Catalogue’ and ‘Standards: Monthly Additions’.
This Indian Standard has been developed from Doc No.: CHD 27 (1534).
Amendments Issued Since Publication
Amendment No. Date of Issue Text Affected
BUREAU OF INDIAN STANDARDS

Headquarters:
Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002
: 2323 0131, 2323 3375, 2323 9402 : www.bis.org.in
Regional Offices:
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg 2323 7617
NEW DELHI 110002 2323 3841
Eastern : 1/14, C.I.T. Scheme VII M, V.I.P. Road, Kankurgachi 2337 8499, 2337 8561
KOLKATA 700054 2337 8626, 2337 9120
Northern : SCO 335-336, Sector 34-A, CHANDIGARH 160022 260 3843
260 9285
Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 2254 1216, 2254 1442
2254 2519, 2254 2315
Western : Manakalaya, E9 MIDC, Marol, Andheri (East) 2832 9295, 2832 7858
MUMBAI 400093 2832 7891, 2832 7892
Branches: A HMEDAB AD. B ANGA LORE. B HOPA L. B HUB AN ESHWAR. CO IMB ATOR E.
DEHRADUN. FARIDABAD. GHAZIABAD. GUWAHATI. HYDERABAD. JAIPUR. LUCKNOW.
NAGPUR. PARWANOO. PATNA. PUNE. RAJKOT. THIRUVANATHAPURAM. VISAKHAPATNAM.
Published by BIS, New Delhi

Indian Standard: IS 11239 (Part 4) : 2014 ISO 1663: 2007

Uploaded by

Copyright:

Available Formats

Indian Standard: IS 11239 (Part 4) : 2014 ISO 1663: 2007

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Indian Standard: IS 11239 (Part 4) : 2014 ISO 1663: 2007

Uploaded by

Copyright:

Available Formats

IS 11239 (Part 4) : 2014

ISO 1663 : 2007

BUREAU OF INDIAN STANDARDS

November 2014 Price Group 7

BIS is a statutory institution established under the , 1986 to promote

Review of Indian Standards

Amendments Issued Since Publication

Amendment No. Date of Issue Text Affected

BUREAU OF INDIAN STANDARDS

You might also like