K

antronics, a pioneer in wireless data

communications, now offers the
KWM-1200+ Single Port and the KWM-9612+
Multi Port High Speed wireless modems. Both LSUB and TUP, KWM units are seamless
are engineered for dependable and versatile and transparent wire link substitutes.
digital communications in the commercial KWM units can also operate as a data
operating environment. operated switch, (DOX).

Kantronics has developed the KWM units to KWM units can fill a variety of roles. They
meet the needs of today, with an eye toward are well made, engineered for dependability
emerging applications. Able to communicate and low in cost. It’s no wonder Kantronics
in a variety of formats, including TCP/IP, units are in use around the world.

KWM-1200+ AND KWM-9612+ FEATURES:

Remote Control and telemetry functions 9-V battery power capability
with two NO inputs and two control (KWM-1200+)
line outputs.
LSUB, TUP, POLL, AX.25, BBS, KISS,
Digital audio drive control. Set from XKISS, HOST, TERMINAL, GPS and
keyboard or by remote control MODEM operating modes
GPS operation mode (NMEA-0183 Upgradeable as new firmware
compatible) allows use with is released
geolocation software.
“Online” HELP feature
Low current requirements
128 k memory standard; 512 k optional
Large capacity internal mailbox
Use with base, mobile or hand-held radios
supports multiple users

KWM-9612+ ADDITIONAL FEATURES:

NEW Paging transmit/receive capability - Port 1 supports 1200 bps
POCSAG compatible
Port 2 supports 4800, 9600,
Dual port 1200/9600 bps 19200 and 38400 bps with DFSK
operation, standard modulation format

KWM-9612+

KWM-1200+

www.kantronics.com
 SPECIFICATIONS – KANTRONICS KWM-1200+ SPECIFICATIONS – KANTRONICS KWM-9612+

Dimensions (HWD) 0.8” x 5.2” x 5.2” or 21mm x 133 mm x 133 Dimensions (HWD) 0.8” x 6.7” x 6.9” or 20 mm x 170 mm x 175 mm
mm (w/o projections) (w/o projections)
Weight 11 oz or 0.32 kg Weight 18 oz. or 0.5 kg (approx)
Power Requirements 6 V dc ~ 25 V dc, less than 30 mA Power Requirements 5.5 V dc ~ 25 V dc, 45 mA (LEDs on, unit active)
(LEDs on, unit active) 6 V dc ~ 25 V dc, Plug Coaxial, center pin positive 2.1 mm
less than 15 mA (LEDs off, unit inactive)
Internal Circuit Board accommodates user installed 9-V
Plug Coaxial, center pin positive 2.1 mm battery connector
Internal Circuit Board accommodates user installed External DB-9 female (radio port 1);
9-V battery connector DB-15 female (radio port 2)
Connection Ports DB-9 female (radio) DB-25 female Connection Ports DB-25 female (computer/data terminal)
(computer/data terminal)
Watchdog timer 3 min (port 1), 40 s (port 2) (approx.)
Watchdog timer 2.5 min (approx)
External Carrier Detect Pulldown to ground
External Carrier Detect Pulldown to ground
A/D Converter Two inputs; 0 ~ 5 V dc 8-bit accuracy Z in = 20 kΩ
A/D Converter Two inputs; 0 ~ 5 V dc 8-bit accuracy
Data Rate Port 1 4800, 9600, 19,200, 38,400 bps
Data Rate 1200 bps (recommended); 300, 400, 600
PTT Output Open drain, +50 V dc max, 200 mA max
PTT Output Open drain, +50 V dc max, 200 mA max
Audio Output Port 1 Continuously adjustable 1 mV p-p ~ 4 V p-p
Audio Output Continuously adjustable 1 mV p-p – 4 v p-p
Audio Output Port 2 2 mV p-p ~ (J20 off); 80 mV p-p (J20 on)
Output impedance 600 Ω, ac coupled
Output Impedance 600 Ω, ac coupled (port1):
Modulation 1200 bps FSK full duplex CCITT V.23 600 Ω, ac or dc coupled (port2)
1300 Hz/2100 Hz
Modulation Port 1 1200 bps FSK full duplex CCITT V.23
Audio Input 1300 Hz/2100 Hz
Sensitivity 5 mV p-p Modulation Port 2 Gaussian Filtered DFSK with normal
Dynamic Range 70 dB Bandwidths of 0.3, 0.5 or full Duplex
4800, 9600, 19,200, 38,400 bps
Input Impedance Unbalanced, 10 kΩ; 600 Ω with
Jumper J3 installed Audio Input
Max input voltage ± 12 V dc; 35 V p-p sinusoidal Sensitivity Port 1 5mv p-p ~ 35V p-p
Operating Modes LSUB, TUP, AX.25, WeFax, KISS, XKISS, HOST, Sensitivity Port 2 Low: 15 mV ~ 200 mV p-p (J16 on);
GPS, MODEM, POLL High 80 mV ~ 2 V p-p (J20 on)
LED Indicators Power, Xmit, Rcv, Connected, Status, Mail Dynamic Range Port 1: >70 dB; Port 2: >20 dB (either range)
(user option on/off) Input Impedance Unbalanced, 10 kΩ, 600 Ω
Remote Control Access External Reset with Jumper J3 installed
Operating Protocols AX.25 Versions 1 and 2 (user selectable) Max Input voltage Port 1: ± 12 V dc; 35 V p-p; Port 2:
± 25 V dc 25 V p-p
Compliance FCC Class B; Europe – CE Conformity
Equalization Port 1: None or Fixed; Port 2; Variable,
Software controlled
RX S/N 0~3 V dc (Zout = 2.2 kΩ)
Operating Modes Packet, KISS, XKISS, Paging, Host GPS, Modem
KWM-1200+ & KWM-9612+ LED Indicators Power, Xmit, Rcv, Connected, Status, Mail

Applications Remote Control Access All controller functions, user defined password
External Reset Pulldown to ground
“Keyboard to keyboard” communications
Operating Protocols AX.25 Versions 1 and 2 (user selectable)
Digipeater-suitable for remote locations
Electronic Mail Box Compliance FCC Class B; Europe – CE Conformity
Local area node
Remote control devices
Remote access of telemetry KWM-1200+ Options:
BBS operations and message forwarding
GPS positioning transmitting and tracking 120 V ac to 12 V dc power cube
(NMEA-0183 data required) 512 k memory expansion chip. Clock (memory) chip
Data storage and retrieval Hardware Single Port (HSP) cable
Send/Receive Files
Send/Receive Paging signals (KWM-9612+ only) KWM-9612+ Options:
1200 < >9600 gateway operation (KWM-9612+ only)
Third Port Expansion Module
KWM units can be used in the field as a GPS mobile 120 V ac to 12 V dc power cube
“tracker” or as a mobile data terminal. Its flexible power 512 k memory expansion chip
requirements (6 - 25 V dc) allow for maximum versatility. Hardware Single Port (HSP) cable

1202 East 23rd Street | Lawrence, KS 66046 | www.kantronics.com Authorized

tel: 785.842.7745 | fax: 785.842.2031 | sales@kantronics.com Dealer
Specifications subject to change without notice or obligation. APRS‚ is a registered trademark of Bob Bruninga, WB4APR. All registered trademarks remain the property of their respective owners.