Wfa - Metric - Tube Fittings

Metric Hydraulic Compression Tube Fittings
TABLE OF CONTENTS
Introduction Pages A to F
Index Pages G to L
FITTINGS PAGES 1 - 63
Tube to Tube Unions Pages 1 - 6
Straight Male Connectors Pages 7 - 16
Elbow Male Connectors Pages 17 - 21
Run Tee Male Connectors Pages 22 - 28
Branch Tee Male Connectors Pages 22 - 28
Banjo Connectors Pages 29 - 33
Swivel Male Connectors Pages 34 - 35
Flange Connectors Pages 36 - 38
Female Connectors Pages 39 - 40
Swivel Adapters Pages 41 - 46
Check Valves Pages 47 - 49
Flare Adapters Pages 50 - 51
Weld Connectors Pages 52 - 54
Nuts and Ferrules Page 55
Miscellaneous Components Pages 56 - 57
Caps and Plugs Pages 58 - 60
Seals Pages 61 - 63
Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Table of Contents
T: 905-831-3222 F: 905-831-3284 E: service@williamsfluidair.com www.williamsfluidair.com
Metric Hydraulic Compression Tube Fittings: Introduction
METRIC TUBE FITTINGS (DIN 2353)
These metric fittings are based on the bite-type system. The fittings have a trumpet shaped opening
(24E taper). This taper opening acts as a wedge together with the cutting ring which will, with pressure
from the rotation of the nut, be forced to cut into the tube and form a visible collar. This system will
stand up to high pressure as well as shock loads. The double-cut cutting ring will seal under extreme
loading conditions.
MATERIALS
DIN 2353 tube fittings are most commonly available in steel, stainless steel 1.4571 (AISI 316Ti) or
brass. Other materials such as Inconel or Monel are available on request.
CARBON STEEL FITTINGS

Cutting Rings: Made of hardened steel and cadmium plated.
Nuts: Are cold formed to provide a tighter grain structure, resulting in higher strength.
Bodies: Fitting bodies are made out of bar stock or forged blanks. Bar stock is used for straight
connectors and couplings. Shaped fittings (elbows, tees or crosses) may be made from bar stock or
forged blanks.
Surface Finish: Nuts and compression bodies are plated with ROHS compliant zinc or new VOSS
nickel zinc. Bodies for weld couplings or components to be welded are given a light oiled finish (no
plating) to be suitable for welding.
STAINLESS STEEL FITTINGS (DIN 1.4571)

The complete line of metric tube fittings described in this "fittings" section is also available in stainless
steel. These fittings are made of 1.4571 stainless steel (AISI designation is 316 Ti). These stainless steel
fittings are dimensionally identical to the carbon steel fittings and are 100% interchangeable. Therefore,
systems that require steel fittings in some locations and stainless in other locations may be designed
without any concerns about using different fitting styles. These fittings are the perfect mate to the
stainless steel tubing shown in the tubing section of this catalogue. They come complete with stainless
steel ferrules of the correct hardness to form a strong seal with stainless tubing. We supply all
components needed to produce a complete piping system in metric stainless steel.
BRASS FITTINGS
Many of the fittings described in this "Fittings" section are also available in brass for use with copper
tubes. The brass fittings are dimensionally identical to the carbon steel fittings. Please contact us to
enquire about the availability of specific styles and sizes.
ORDERING INFORMATION
Stainless steel: Add -SS to the carbon steel fitting part numbers, eg. G-L-06 A G-L-06SS.
Brass: Add -BR, eg. G-L-06 A G-L-06BR.
FITTING SERIES - LIGHT, MEDIUM, HEAVY

Fittings are manufactured in light, medium and heavy duty series.
LL: Light - Medium service, hydraulic and pneumatic. Maximum 1500 psi (100 bar).
L: Medium - Heavy service. Maximum 7250 psi (500 bar).
S: Heavy - Extreme Heavy service. Maximum 11600 psi (800 bar).

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Introduction Page A
CONNECTING TUBING TO THE FITTING BODY: Tubing may be connected to the fitting body by
using a cutting ring (standard), 37E flared tubing and a flare adapter, or by welding the tubing onto a
weld nipple adapter. Both the flare adapter and weld adapter are machined to mate to the 24E cone in
the fitting body.
FUNCTION OF THE DOUBLE-CUT CUTTING RING: Double-cut cutting rings are designed with two
cutting edges (1 and 2). Edge 1 is already cutting into the tube before edge 2 starts to cut in. After this,
the wedge (3) helps to clamp the ring between the inner cone and the tube. This process dampens
vibrations so that they cannot reach tube incisions 1 and 2. A distinct increase in required effort is a
clear sign that tightening of the nut is finished. When checking, there must be a visible collar (5). A high
form closure is achieved by the two cutting edges. The design of the profile makes it possible for an
optimum distribution of power over the whole length of the cone to be obtained, as well as safety
against bending stresses and changes in pressure and temperature.
FUNCTION OF A FLARE COUPLING:The flare couplings guarantee a reliable connection between

flared tubes with a 37E angle and the coupling body with a 24E cone port end (1). The most important
structural element is the adapter (2) which seals against the cone of the coupling body and the 37E
angle of the flared tube. When assembling, the adapter with the O-ring is pressed into the cone of the
coupling body to the face stop. When this is done, a metal seal is formed between the inner cone and
the adapter with the O-ring forming an additional seal. Because of the face stop on the adapter,
enlargement of the 24E cone is avoided. This design also ensures that the adapter will be pressed
properly into the cone. When the nut is tightened (4) a little more, the flared tube (3) is clamped and
sealing between the flare sleeve (5) and the adapter (2) occurs.
FUNCTION OF THE WELD NIPPLE: The weld nipple with O-ring (3) can be used instead of cutting
rings in all coupling bodies with a 24E cone end (1) and with nuts (2). The weld nipples are designed
for use under extreme working conditions such as vibrations and changes in pressure and
temperature. When assembled, a double sealing effect is produced - a metal seal between the weld
nipple and inner cone of the coupling body as well as another seal made by the O-ring.

Introduction Page B 1018 Salk Road Pickering, Ontario Canada L1W 3C5
PRESSURE RANGES OF FITTINGS
As a rule, nominal pressures for steel fittings have a safety factor of 4 under normal working conditions
and temperatures of under 130EC. Working pressure for stainless steel decreases by approximately
11% at 100EC, and by approximately 20% at 200EC. The following is a general guideline only. Please
check with us if precise data is required.
Working Pressure (Bar)

Series Tube Size
Steel Stainless Steel Brass
LL ALL 100 100 100
L 6, 8, 10 400 250 315
L 12, 15 400 250 315
L 18 315 160 315
L 22 315 160 160
L 28, 35, 42 250 100 160
S 6, 8, 10 630 630 630
S 12, 14 630 630 630
S 16 400 400 400
S 20, 25 400 400 400
S 30 400 250 400
S 38 250 250 315
LL = LOW PRESSURE L = MEDIUM PRESSURE S = HIGH PRESSURE
Not all fitting styles will be rated for the working pressures shown above. Please see the appropriate catalogue
pages for the exact pressure rating for a given fitting. Contact us for more pressure information if required.
LL Series L Series S Series

Tube Size Thread Nut Tube Size Thread Nut Tube Size Thread Nut
4 M8 x 1 10 6 M12 x 1.5 14 6 M14 x 1.5 17
5 M10 x 1 10 8 M14 x 1.5 17 8 M16 x 1.5 19
6 M10 x 1 12 10 M16 x 1.5 19 10 M18 x 1.5 22
8 M 12 x 1 14 12 M18 x 1.5 22 12 M20 x 1.5 24
15 M22 x 1.5 27 14 M22 x 1.5 27
18 M26 x 1.5 32 16 M24 x 1.5 30
22 M30 x 2 36 20 M30 x 2 36
28 M36 x 2 41 25 M36 x 2 46
35 M45 x 2 50 30 M42 x 2 50
42 M52 x 2 60 38 M52 x 2 60
FITTING IDENTIFICATION FOR METRIC COMPRESSION TUBE FITTINGS
Use these measurements with the information on the table below to make a proper identification:
1. If the tube nut is available, read the fitting size and series that is stamped onto the nut (i.e.16-S).
2. If no nut is available, or no size can be read for the nut, then identify the fitting by one of the following:
- Measure the tube O.D. and the male compression thread O.D.
- Measure the tube O.D. and the size of wrench required for the tube nut
- Measure the O.D. of the compression thread and the I.D. of the fitting body where the tubing will
be seated

Introduction Page C 1018 Salk Road Pickering, Ontario Canada L1W 3C5
PORT CONNECTION THREADS
Male port threads available are British Standard Pipe Parallel (BSPP), British Standard Pipe Tapered (BSPT),
Metric Fine, National Pipe Thread (NPT), and SAE male thread with O-ring (O-ring boss).
Thread Identification
BSPP or Metric BSPP or Metric BSPT Thread or SAE Male Thread ISO6149
Thread Metal Thread "ED" Metric Taper NPT Thread (O-ring boss) Metric Thread
Seal Rubber Seal Thread O-ring Seal O-ring Seal
BSP Threads
Dash Size Designation Thread O.D. (inch) Thread O.D. (mm) Thread Pitch (T.P.I.)
-2 1/8-28, R1/8, G1/8 0.383 9.73 28
-4 1/4-19, R1/4, G1/4 0.518 13.16 19
-6 3/8-19, R3/8, G3/8 0.656 16.66 19
-8 1/2-14, R1/2, G1/2 0.825 20.96 14
-12 3/4-14, R3/4, G3/4 1.041 26.44 14
-16 1-11, R1", G1" 1.309 33.25 11
-20 1 1/4-11, R1 1/4, G1 1/4 1.65 41.91 11
-24 1 1/2-11, R1 1/2, G1 1/2 1.882 47.8 11
Thread O.D. for BSP threads are measured at point "G" for parallel threads and point "G1" for tapered threads. Thread O.D. sizes
shown are theoretical and actual measured sizes will be smaller.
Metric Threads
Designation Thread O.D. (mm) Thread O.D. (inch) Thread Pitch (mm)
M8x1 8 0.314 1
M10x1 10 0.393 1
M12x1.5 12 0.472 1.5
M14x1.5 14 0.551 1.5
M16x1.5 16 0.629 1.5
M18x1.5 18 0.708 1.5
M20x1.5 20 0.787 1.5
M22x1.5 22 0.866 1.5
M24x1.5 24 0.944 1.5
M26x1.5 26 1.023 1.5
M27x2 27 1.063 2
M30x2 30 1.181 2
M33x2 33 1.299 2
M36x2 36 1.417 2
M42x2 42 1.653 2
M45x2 45 1.771 2
M48x2 48 1.89 2
M52x2 52 2.047 2
Thread O.D. for Metric threads are measured at point "G" for parallel threads and point "G1" for tapered threads.
Thread O.D. sizes shown in inches are for reference only.
Thread O.D. sizes shown are theoretical and actual measured sizes will be smaller.

Introduction Page D 1018 Salk Road Pickering, Ontario Canada L1W 3C5
Thread Identification continued ...
NPT Threads
Dash Size Designation Thread O.D. (inch) Thread Pitch (TPI)
-2 1/8 NPT 0.405 27
-4 1/4 NPT 0.54 18
-6 3/8 NPT 0.675 18
-8 1/2 NPT 0.84 14
-12 3/4 NPT 1.05 14
-16 1" NPT 1.315 11 1/2
-20 11/4 NPT 1.66 11 1/2
-24 11/2 NPT 1.9 11 1/2
-32 2" NPT 2.375 11 1/2
Thread O.D. for NPT threads should be measured at the largest part of the taper, and correspond to the O.D.
of pipe sizes. Thread O.D. sizes shown are theoretical and actual measured sizes will be smaller.
SAE O-ring Threads (O-ring boss)

Dash Size Designation Thread O.D. (inch) Thread Pitch (TPI)
-2 5/16 - 24 UNF 0.313 24
-4 7/16 - 20 UNF 0.437 20
-6 9/16 - 18 UNF 0.562 18
-8 3/4 - 16 UNF 0.75 16
-10 7/8 - 14 UNF 0.875 14
-12 1 1/16- 12 UN 1.062 12
-16 1 5/16 - 12 UN 1.313 12
-20 1 5/8 - 12 UN 1.625 12
-24 1 7/8 - 12 UN 1.875 12
Thread O.D. for SAE threads are measured at point "G".
ISO 6149
Designation Thread O.D. (mm) Thread O.D. (inch) Thread Pitch (mm)
M8x1 8 0.314 1
M10x1 10 0.393 1
M12x1.5 12 0.472 1.5
M14x1.5 14 0.551 1.5
M16x1.5 16 0.629 1.5
M18x1.5 18 0.708 1.5
M20x1.5 20 0.787 1.5
M22x1.5 22 0.866 1.5
M24x1.5 24 0.944 1.5
M26x1.5 26 1.023 1.5
M27x2 27 1.063 2
M30x2 30 1.181 2
M33x2 33 1.299 2
M36x2 36 1.417 2
M42x2 42 1.653 2
M45x2 45 1.771 2
M48x2 48 1.89 2
M52x2 52 2.047 2
Thread O.D. for Metric threads are measured at point "G" for parallel threads and point "G1" for tapered threads.
Thread O.D. sizes shown in inches are for reference only.

Introduction Page E 1018 Salk Road Pickering, Ontario Canada L1W 3C5
Metric Hydraulic Compression Tube Fitting Index
TUBE - TUBE UNIONS
G- W- T- K-
Straight Union Union Elbow Union Tee Union Cross
Page 1 Page 1 Page 2 Page 2
GR- TR- SV- WSV-

Reducing Tube Union Reducing Union Tee Straight Bulkhead Union Elbow Bulkhead Union
ESV- ESNO-
Weld Bulkhead Weld Union
Page 6 Page 6
STRAIGHT MALE CONNECTORS
GE-R-T GE- Male Connector GE-R- Male Connector GE-Red- Male Connector
Male Connector NPT Thread BSPP Thread BSPP Thread with Seal
BSP Taper Thread L, LL: Page 7 L: Page 9 L: Page 9
L, LL: Page 7 S: Page 8 S: Page 10 S: Page 10
GE-M-T GE-M Male Connector GE-Med- Male Connector GE- Male Connector
Male Connector Metric Straight Thread Metric Straight Thread SAE O-ring Thread
Metric Taper Thread L: Page 12 with Seal L: Page 14
Page 11 S: Page 13 L: Page 12 / S: Page 13 S: Page 15

Index Page F 1018 Salk Road Pickering, Ontario Canada L1W 3C5
GEO-
Male Connector
ISO 6149
Page 16
ELBOW MALE CONNECTORS
WE- WE- WE- WE-

Male Elbow Connector Male Elbow Connector Male Elbow Connector Male Elbow Connector
BSPT/BSPP Thread NPT Thread Metric Taper Thread Metric Straight Thread
Page 17 Page 17 Page 18 Page18
WEE45-
WEE- Adjust. Male Elbow WEO- Adjust. Male Elbow Male Stud Elbow 45E
BSPP and Metric ISO6149 and SAE O-ring BSPP and Metric
Page 19 Page 20 Page 21
RUN TEE MALE CONNECTOR
LE- Run Tee Connector LE- Run Tee Connector LE- Run Tee Connector TE- Run Tee Connector
BSPP Thread BSPT Thread Metric Straight Thread Metric Taper Thread
LE- Run Tee Connector LEE- Adjustable Run Tee LEE- Adjustable Run Tee LEO- Adjust. Run Tee
NPT Thread BSPP Thread Metric Thread ISO6149: Page 27
Page 24 Page 25 Page 26 SAE O-ring: Page 28

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Index Page G
BRANCH TEE MALE CONNECTOR
TE- TE- TE- TE-

Branch Tee Connector Branch Tee Connector Branch Tee Connector Branch Tee Connector
BSPP Taper Thread BSPT Thread Metric Straight Thread Metric Taper Thread
TE- TEE- TEE- TEO-

Branch Tee Connector Adjustable Branch Tee Adjustable Branch Tee Adjustable Branch Tee
NPT Thread BSPP Thread Metric Thread ISO6149: Page 27
Page 24 Page 25 Page 26 SAE O-ring: Page 28
BANJO CONNECTORS
DSVW- SWVE- WHO- DSVT-

Free Flow Banjo 2-Piece Standard Banjo Through Free Flow Banjo Through Banjo Tee
Bolt, BSPP and Metric Bolt, BSPP and Metric Bolt, BSPP and Metric BSPP and Metric
WHT-
Banjo Tee
BSPP and Metric
Page 33
SWIVEL MALE CONNECTORS
EGE- EVGE- EVGE-X

Swivel Male Connector Swivel Male Connector Swivel Male Connector
with Seal, BSPP & Metric NPT Thread Body, NPT Thread

Index Page H 1018 Salk Road Pickering, Ontario Canada L1W 3C5
FLANGE CONNECTORS
GAFS- Weld Style GFS- SAE Flange GFD- DIN Flange
SAE Flange WFS- SAE Flange 90E WFD- DIN Flange 90E
FEMALE CONNECTORS
MAV- MAV-EV Swivel

Gauge Connector Gauge Connector
GAI- Page 40 Page 40
Female Connector
BSPP & Metric
Page 39
SWIVEL ADAPTERS / SWIVEL UNIONS
EW- EW45- EL- ET-

Swivel Elbow Swivel Elbow 45E Swivel Run Tee Swivel Branch Tee
RED- GZ- GZ45- GZR-

Tube Reducer Swivel Union Swivel Union 45E Reducing Swivel Union
Page 43 & 44 Page 45 Page 45 Page 46
CHECK VALVES
RHV- Check Valve RHZ- Check Valve

RHD- Flow Port to Tube Flow Tube to Port
In-Line Check Valve BSPP: Page 48 BSPP: Page 48
Page 47 Metric: Page 49 Metric: Page 49

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Index Page I
FLARE ADAPTERS, COMPONENTS
AB- BMO- SRO- BAO-

Complete Adapter Flare Nut Flare Support Ring Flare Adapter
WELD CONNECTORS, NIPPLES
AS- WAS- SKO- SKO-

Weld Coupling 90E Weld Coupling Weld Nipple Weld Straight Nipple
NUTS AND FERRULES
M- D- DC-
Tube Nut Ferrule Double Bite Ferrule
MISCELLANEOUS COMPONENTS
Ri-ed
Ri- BSPP Male x Female VSH- S-
BSPP Male x Female with Seal Tube Reinforcing Sleeve Sleeve Nut

Index Page J 1018 Salk Road Pickering, Ontario Canada L1W 3C5
CAPS AND PLUGS
BUZ - Fitting Plug with Nut V- VSTI- VSTO-

BUZ-X - Fitting Plug Body Tube End Cap Port Plug with Seal Metric ISO 6149 Port Plug
SEALS
ED- DKA- KDE- EDE-

Rubber Seal Metal Seal Metal/Teflon Seal Metal/Rubber Seal
OR- OR- DKI-

O-ring for DKO O-ring for 37E Flare Seal for BSPP
Type Swivel AB- Fitting Gauge Connectors

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Index Page K
TUBE TO TUBE UNIONS
Straight Union Union Elbow
Tube Working
Series Size Pressure Part Number Part Number
(mm) (bar)
LL 4 100 G-LL-04 W-LL-04

LL 5 100 G-LL-05 W-LL-05
LL 6 100 G-LL-06 W-LL-06
LL 8 100 G-LL-08 W-LL-08
LL 10 100 G-LL-10 W-LL-10
LL 12 100 G-LL-12 W-LL-12
L 6 400 G-L-06 W-L-06
L 8 400 G-L-08 W-L-08
L 10 400 G-L-10 W-L-10
L 12 400 G-L-12 W-L-12
L 15 400 G-L-15 W-L-15
L 18 315 G-L-18 W-L-18
L 22 315 G-L-22 W-L-22
L 28 250 G-L-28 W-L-28
L 35 250 G-L-35 W-L-35
L 42 250 G-L-42 W-L-42
S 6 630 G-S-06 W-S-06
S 8 630 G-S-08 W-S-08
S 10 630 G-S-10 W-S-10
S 12 630 G-S-12 W-S-12
S 14 630 G-S-14 W-S-14
S 16 400 G-S-16 W-S-16
S 20 400 G-S-20 W-S-20
S 25 400 G-S-25 W-S-25
S 30 400 G-S-30 W-S-30
S 38 315 G-S-38 W-S-38
Standard fittings are plated steel.

For stainless steel fittings, add “SS” to the Williams Fluidair part number.
For brass fittings, add “BR” to the Williams Fluidair part number. Enquire for availability.

1018 Salk Road Pickering, Ontario Canada L1W 3C5 Page 1
TUBE TO TUBE UNIONS
Union Tee Union Cross
Tube Working
(mm) (bar)
LL 4 100 T-LL-04 K-LL-04

LL 5 100 T-LL-05
LL 6 100 T-LL-06 K-LL-06
LL 8 100 T-LL-08 K-LL-08
LL 10 100 T-LL-10 K-LL-10
LL 12 100 T-LL-12 K-LL-12
L 6 400 T-L-06 K-L-06
L 8 400 T-L-08 K-L-08
L 10 400 T-L-10 K-L-10
L 12 400 T-L-12 K-L-12
L 15 400 T-L-15 K-L-15
L 18 315 T-L-18 K-L-18
L 22 315 T-L-22 K-L-22
L 28 250 T-L-28 K-L-28
L 35 250 T-L-35 K-L-35
L 42 250 T-L-42 K-L-42
S 6 630 T-S-06 K-S-06
S 8 630 T-S-08 K-S-08
S 10 630 T-S-10 K-S-10
S 12 630 T-S-12 K-S-12
S 14 630 T-S-14 K-S-14
S 16 400 T-S-16 K-S-16
S 20 400 T-S-20 K-S-20
S 25 400 T-S-25 K-S-25
S 30 400 T-S-30 K-S-30
S 38 315 T-S-38 K-S-38
Standard fittings are plated steel.

For stainless steel fittings, add “SS” to the Williams Fluidair part number.
For brass fittings, add “BR” to the Williams Fluidair part number. Enquire for availability.

Page 2 1018 Salk Road Pickering, Ontario Canada L1W 3C5
REDUCING TUBE UNIONS
Reducing Tube Union Reducing Tube Union

Working Tube Tube Working Tube Tube
Pressure Size Size Part Number Pressure Size Size Part Number
Bar 1 2 Bar 1 2
100 6-LL 4-LL GR-LL-06/04 630 8-S 6-S GR-S-06/06

100 8-LL 4-LL GR-LL-08/04 630 10-S 6-S GR-S-10/06
100 8-LL 6-LL GR-LL-08/06 630 10-S 8-S GR-S-10/08
400 8-L 6-L GR-L-08/06 630 12-S 6-S GR-S-12/06
400 10-L 6-L GR-L-10/06 630 12-S 8-S GR-S-12/08
400 10-L 8-L GR-L-10/08 630 12-S 10-S GR-S-12/10
400 12-L 6-L GR-L-12/06 630 14-S 10-S GR-S-14/10
400 12-L 8-L GR-L-12/08 630 14-S 12-S GR-S-14/12
400 12-L 10-L GR-L-12/10 400 16-S 10-S GR-S-16/10
400 15-L 6-L GR-L-15/06 400 16-S 12-S GR-S-16/12
400 15-L 8-L GR-L-15/08 400 16-S 14-S GR-S-16/14
400 15-L 10-L GR-L-15/10 400 20-S 10-S GR-S-20/10
400 15-L 12-L GR-L-15/12 400 20-S 12-S GR-S-20/12
315 18-L 8-L GR-L-18/08 400 20-S 14-S GR-S-20/14
315 18-L 10-L GR-L-18/10 400 20-S 16-S GR-S-20/16
315 18-L 12-L GR-L-18/12 400 25-S 16-S GR-S-25/16
315 18-L 15-L GR-L-18/15 400 25-S 20-S GR-S-25/20
315 22-L 12-L GR-L-22/12 400 30-S 20-S GR-S-30/20
315 22-L 15-L GR-L-22/15 400 30-S 25-S GR-S-30/25
315 22-L 18-L GR-L-22/18 315 38-S 30-S GR-S-38/30
250 28-L 10-L GR-L-28/10
250 28-L 12-L GR-L-28/12
250 28-L 15-L GR-L-28/15
250 28-L 18-L GR-L-28/18
250 28-L 22-L GR-L-28/22
250 35-L 22-L GR-L-35/22
250 35-L 28-L GR-L-35/28
Additional sizes may be available.

REDUCING UNION TEE
Reducing Union Tee Reducing Union Tee

Working Tube Tube Tube Working Tube Tube Tube
Pressure Size Size Size Part Number Pressure Size Size Size Part Number
Bar 1 2 3 Bar 1 2 3
100 6–LL 4-LL 6-LL TR-LL-06/04/06 315 22-L 18-L 22-L TR-L-22/18/22
100 4-LL 8-LL 4-LL TR-LL-04/08/04 315 22-L 22-L 18 -L TR-L-22/22/18
400 6-L 8-L 6-L TR-L-06/08/06 250 22-L 28-L 22-L TR-L-22/28/22
400 8-L 6-L 8-L TR-L-08/06/08 250 28-L 10-L 28-L TR-L-28/10/28
400 6-L 10-L 6-L TR-L-06/10/06 250 28-L 12-L 28-L TR-L-28/12/28
400 8-L 10-L 8-L TR-L-08/10/08 250 28-L 15-L 28-L TR-L-28/15/28
400 10-L 6-L 10-L TR-L-10/06/10 250 28-L 18-L 28-L TR-L-28/18/28
400 10-L 8-L 10-L TR-L-10/08/10 250 28-L 22-L 22-L TR-L-28/22/22
400 10-L 10-L 6-L TR-L-10/10/08 250 28-L 22-L 28-L TR-L-28/22/28
400 8-L 12-L 8-L TR-L-08/12/08 250 35-L 22-L 35-L TR-L-35/22/35
400 12-L 6-L 12-L TR-L-12/06/12 250 35-L 28-L 35-L TR-L-35/28/35
400 12-L 8-L 8-L TR-L-12/08/08 630 10-S 6-S 10-S TR-S-10/06/10
400 12-L 8-L 12-L TR-L-12/08/12 630 12-S 6-S 12-S TR-S-12/06/12
400 12-L 10-L 10-L TR-L-12/10/10 630 12-S 8-S 12-S TR-S-12/08/12
400 12-L 10-L 12-L TR-L-12/10/12 630 12-S 10-S 12-S TR-S-12/10/12
400 10-L 15-L 10-L TR-L-10/15/10 630 14-S 10-S 14-S TR-S-14/10/14
400 12-L 15-L 12-L TR-L-12/15/12 400 12-S 16-S 12-S TR-S-12/16/12
400 15-L 6-L 15-L TR-L-15/06/15 400 16-S 6-S 16-S TR-S-16/06/16
400 15-L 8-L 15-L TR-L-15/08/15 400 16-S 8-S 16-S TR-S-16/08/16
400 15-L 10-L 15-L TR-L-15/10/15 400 16-S 10-S 16-S TR-S-16/10/16
400 15-L 12-L 12-L TR-L-15/12/12 400 16-S 12-S 16-S TR-S-16/12/16
400 15-L 15-L 12-L TR-L-15/15/12 400 16-S 20-S 16-S TR-S-16/20/16
400 15-L 12-L 15-L TR-L-15/12/15 400 20-S 10-S 20-S TR-S-20/10/20
315 12-L 15-L 12-L TR-L-12/15/12 400 20-S 12-S 20-S TR-S-20/12/20
315 18-L 10-L 10-L TR-L-18/10/10 400 20-S 16-S 20-S TR-S-20/16/20
315 18-L 10-L 18-L TR-L-18/10/18 400 20-S 25-S 20-S TR-S-20/25/20
315 18-L 12-L 18-L TR-L-18/12/18 400 25-S 16-S 25-S TR-S-25/16/25
315 18-L 15-L 18-L TR-L-18/15/18 400 25-S 20-S 25-S TR-S-25/20/25
315 18-L 18-L 10-L TR-L-18/18/10 400 25-S 30-S 25-S TR-S-25/30/25
315 22-L 10-L 22-L TR-L-22/10/22 400 30-S 16-S 30-S TR-S-30/16/30
315 22-L 12-L 22-L TR-L-22/12/22 400 30-S 20-S 30-S TR-S-30/20/30
315 22-L 15-L 15-L TR-L-22/15/15 400 30-S 25-S 30-S TR-S-30/25/30
315 22-L 15-L 22-L TR-L-22/15/22
315 22-L 18-L 18-L TR-L-22/18/18

TUBE TO TUBE BULKHEAD UNIONS
Straight Bulkhead Union Elbow Bulkhead Union

Tube Working
(mm) (bar)
LL 4 100 SV-LL-04 WSV-LL-04

L 6 400 SV-L-06 WSV-L-06
L 8 400 SV-L-08 WSV-L-08
L 10 400 SV-L-10 WSV-L-10
L 12 400 SV-L-12 WSV-L-12
L 15 400 SV-L-15 WSV-L-15
L 18 315 SV-L-18 WSV-L-18
L 22 315 SV-L-22 WSV-L-22
L 28 250 SV-L-28 WSV-L-28
L 35 250 SV-L-35 WSV-L-35
L 42 250 SV-L-42 WSV-L-42
S 6 630 SV-S-06 WSV-S-06
S 8 630 SV-S-08 WSV-S-08
S 10 630 SV-S-10 WSV-S-10
S 12 630 SV-S-12 WSV-S-12
S 14 630 SV-S-14 WSV-S-14
S 16 400 SV-S-16 WSV-S-16
S 20 400 SV-S-20 WSV-S-20
S 25 400 SV-S-25 WSV-S-25
S 30 400 SV-S-30 WSV-S-30
S 38 315 SV-S-38 WSV-S-38

MISCELLANEOUS STRAIGHT UNIONS
Weld Bulkhead Weld Union

Tube Working
(mm) (bar)
L 6 400 ESV-L-06 ESNO-L-06

L 8 400 ESV-L-08 ESNO-L-08
L 10 400 ESV-L-10 ESNO-L-10
L 12 400 ESV-L-12 ESNO-L-12
L 15 400 ESV-L-15 ESNO-L-15
L 18 315 ESV-L-18 ESNO-L-18
L 22 315 ESV-L-22 ESNO-L-22
L 28 250 ESV-L-28 ESNO-L-28
L 35 250 ESV-L-35 ESNO-L-35
L 42 250 ESV-L-42 ESNO-L-42
S 6 630 ESV-S-06 ESNO-S-06
S 8 630 ESV-S-08 ESNO-S-08
S 10 630 ESV-S-10 ESNO-S-10
S 12 630 ESV-S-12 ESNO-S-12
S 14 630 ESV-S-14 ESNO-S-14
S 16 400 ESV-S-16 ESNO-S-16
S 20 400 ESV-S-20 ESNO-S-20
S 25 400 ESV-S-25 ESNO-S-25
S 30 400 ESV-S-30 ESNO-S-30
S 38 315 ESV-S-38 ESNO-S-38
The ESV- weld bulkhead bodies are low carbon steel, unplated, suitable for welding.

MALE CONNECTORS: BSPT & NPT PORT THREADS (L & LL)
Male Connector Male Connector

BSP Taper Thread NPT Thread
Tube Working Port Port

Series Size Pressure Thread Part Number Thread Part Number
(mm) (bar) BSPT NPT
LL 4 100 1/8" * GE-LLR-04 1/8" * GE-LL-04

LL 5 100 1/8" * GE-LLR-05 1/8" * GE-LL-05
LL 6 100 1/8" * GE-LLR-06 1/8" * GE-LL-06
LL 8 100 1/8" * GE-LLR-08 1/8" * GE-LL-08
LL 10 100 1/4" * GE-LLR-10
LL 12 100 1/4" * GE-LLR-12
L 6 315 1/8" * GE-LR-06 1/8T 1/8" * GE-L-06 1/8
L 6 315 1/4" GE-LR-06 1/4T 1/4" GE-L-06 1/4
L 6 315 3/8" GE-LR-06 3/8T 3/8" GE-L-06 3/8
L 8 315 1/8" GE-LR-08 1/8T 1/8" GE-L-08 1/8
L 8 315 1/4" * GE-LR-08 1/4T 1/4" * GE-L-08 1/4
L 8 315 3/8" GE-LR-08 3/8T 3/8" GE-L-08 3/8
L 8 315 1/2" GE-LR-08 1/2T 1/2" GE-L-08 1/2
L 10 315 1/8" GE-LR-10 1/8T 1/8" GE-L-10 1/8
L 10 315 1/4" * GE-LR-10 1/4T 1/4" * GE-L-10 1/4
L 10 315 3/8" GE-LR-10 3/8T 3/8" GE-L-10 3/8
L 10 315 1/2" GE-LR-10 1/2T 1/2" GE-L-10 1/2
L 12 315 1/4" GE-LR-12 1/4T 1/4" GE-L-12 1/4
L 12 315 3/8" * GE-LR-12 3/8T 3/8" * GE-L-12 3/8
L 12 315 1/2" GE-LR-12 1/2T 1/2" GE-L-12 1/2
L 12 315 3/4" GE-LR-12 3/4T
L 15 315 3/8" GE-LR-15 3/8T 3/8" GE-L-15 3/8
L 15 315 1/2" * GE-LR-15 1/2T 1/2" * GE-L-15 1/2
L 15 315 3/4" GE-LR-15 3/4T 3/4" GE-L-15 3/4
L 18 315 3/8" GE-LR-18 3/8T 3/8" GE-L-18 3/8
L 18 315 1/2" * GE-LR-18 1/2T 1/2" * GE-L-18 1/2
L 18 315 3/4" GE-LR-18 3/4T 3/4" GE-L-18 3/4
L 18 315 1" GE-LR-18/1T
L 22 160 1/2" 1/2" GE-L-22 1/2
L 22 160 3/4" * GE-LR-22 3/4T 3/4" * GE-L-22 3/4
L 22 160 1" GE-LR-22/1T 1" GE-L-22/1
L 28 160 1" * GE-LR-28/1T 1" * GE-L-28/1
L 28 160 1-1/4" 1-1/4" GE-L-28 11/4
L 35 160 1-1/4" * GE-LR-35 11/4T 1-1/4" * GE-L-35 11/4
L 42 160 1-1/2" * GE-LR-42 11/2T 1-1/2" * GE-L-42 11/2
* Indicates standard port thread for a given tube size.

MALE CONNECTORS: BSPT & NPT PORT THREADS (S)
Male Connector Male Connector

BSP Taper Thread NPT Thread

(mm) (bar) BSPT NPT
S 6 630 1/8" GE-SR-06 1/8T

S 6 630 1/4" * GE-SR-06 1/4T 1/4" * GE-S-06 1/4
S 6 630 3/8" GE-S-06 3/8
S 6 630 1/2" GE-S-06 1/2
S 8 630 1/4" * GE-SR-08 1/4T 1/4" * GE-S-08 1/4
S 8 630 1/2" GE-S-08 1/2
S 10 630 1/8" GE-S-10 1/8
S 10 630 1/4" GE-S-10 1/4
S 10 630 3/8" * GE-SR-10 3/8T 3/8" * GE-S-10 3/8
S 10 630 1/2" GE-SR-10 1/2T 1/2" GE-S-10 1/2
S 12 630 1/4" GE-SR-12 1/4T 1/4" GE-S-12 1/4
S 12 630 3/8" * GE-SR-12 3/8T 3/8" * GE-S-12 3/8
S 12 630 1/2" GE-S-12 1/2
S 12 630 3/4" GE-S-12 3/4
S 14 630 3/8" GE-S-14 3/8
S 14 630 1/2" * GE-SR-14 1/2T 1/2" * GE-S-14 1/2
S 16 400 3/8" GE-SR-16 3/8T 3/8" GE-S-16 3/8
S 16 400 1/2" * GE-SR-16 1/2T 1/2" * GE-S-16 1/2
S 16 400 3/4" GE-S-16 3/4
S 20 400 1/2" GE-SR-20 1/2T 1/2" GE-S-20 1/2
S 20 400 3/4" * GE-SR-20 3/4T 3/4" * GE-S-20 3/4
S 20 400 1" GE-S-20/1
S 25 400 3/4" GE-SR-25 3/4T 3/4" GE-S-25 3/4
S 25 400 1" * GE-SR-25/1T 1" * GE-S-25/1
S 25 400 1-1/4" GE-S-25 11/4
S 30 400 3/4" GE-S-30 3/4
S 30 400 1" GE-S-30/1
S 30 400 1-1/4" * GE-SR-30 11/4T 1-1/4" * GE-S-30 11/4
S 38 315 1" GE-S-38/1
S 38 315 1-1/4" GE-S-38 11/4
S 38 315 1-1/2" * GE-SR-38 11/2T 1-1/2" * GE-S-38 11/2

MALE CONNECTORS: BSPP PORT THREADS (L)
Male Connector Male Connector BSPP

BSPP Straight Thread Straight Thread with Seal
Tube Port Working Working

Part Part
Series Size Thread Pressure Pressure
Number Number
(mm) BSPP (bar) (bar)
L 6 1/8" * 315 GE-LR-06 1/8 400 GE-LRed-06 1/8

L 6 1/4" 315 GE-LR-06 1/4 400 GE-LRed-06 1/4
L 6 3/8" 315 GE-LR-06 3/8 400 GE-LRed-06 3/8
L 6 1/2" 315 GE-LR-06 1/2 400 GE-LRed-06 1/2
L 8 1/8" 315 GE-LR-08 1/8 400 GE-LRed-08 1/8
L 8 1/4" * 315 GE-LR-08 1/4 400 GE-LRed-08 1/4
L 8 3/8" 315 GE-LR-08 3/8 400 GE-LRed-08 3/8
L 8 1/2" 315 GE-LR-08 1/2 400 GE-LRed-08 1/2
L 10 1/8" 315 GE-LR-10 1/8 400 GE-LRed-10 1/8
L 10 1/4" * 315 GE-LR-10 1/4 400 GE-LRed-10 1/4
L 10 3/8" 315 GE-LR-10 3/8 400 GE-LRed-10 3/8
L 10 1/2" 315 GE-LR-10 1/2 400 GE-LRed-10 1/2
L 12 1/4" 315 GE-LR-12 1/4 400 GE-LRed-12 1/4
L 12 3/8" * 315 GE-LR-12 3/8 400 GE-LRed-12 3/8
L 12 1/2" 315 GE-LR-12 1/2 400 GE-LRed-12 1/2
L 12 3/4" 315 GE-LR-12 3/4 400 GE-LRed-12 3/4
L 15 3/8" 315 GE-LR-15 3/8 400 GE-LRed-15 3/8
L 15 1/2" * 315 GE-LR-15 1/2 400 GE-LRed-15 1/2
L 15 3/4" 315 GE-LR-15 3/4 400 GE-LRed-15 3/4
L 18 3/8" 315 GE-LR-18 3/8 315 GE-LRed-18 3/8
L 18 1/2" * 315 GE-LR-18 1/2 315 GE-LRed-18 1/2
L 18 3/4" 315 GE-LR-18 3/4 315 GE-LRed-18 3/4
L 18 1" 315 GE-LR-18/1 315 GE-LRed-18/1
L 22 1/2" 250 GE-LR-22 1/2 315 GE-LRed-22 1/2
L 22 3/4" * 250 GE-LR-22 3/4 315 GE-LRed-22 3/4
L 22 1" 250 GE-LR-22/1 315 GE-LRed-22/1
L 28 3/4" 250 GE-LR-28 3/4 250 GE-LRed-28 3/4
L 28 1" * 250 GE-LR-28/1 250 GE-LRed-28/1
L 28 1-1/4" 250 GE-LR-28 11/4 250 GE-LRed-28 11/4
L 35 1" 250 GE-LR-35/1 250 GE-LRed-35/1
L 35 1-1/4" * 250 GE-LR-35 11/4 250 GE-LRed-35 11/4
L 35 1-1/2" 250 GE-LR-35 11/2 250 GE-LRed-35 11/2
L 42 1-1/4" 250 GE-LR-42 11/4 250 GE-LRed-42 11/4
L 42 1-1/2" * 250 GE-LR-42 11/2 250 GE-LRed-42 11/2

MALE CONNECTORS: BSPP PORT THREADS (S)
Male Connector Male Connector BSPP

BSPP Straight Thread Straight Thread with Seal
Tube Port Working Working

Series Size Thread Pressure Part Number Pressure Part Number
(mm) BSPP (bar) (bar)
S 6 1/4" * 630 GE-SR-06 1/4 630 GE-SRed-06 1/4

S 6 3/8" 630 GE-SR-06 3/8
S 6 1/2" 630 GE-SR-06 1/2 630 GE-SRed-06 1/2
S 8 1/8" 630 GE-SRed-08 1/8
S 8 1/4" * 630 GE-SR-08 1/4 630 GE-SRed-08 1/4
S 8 3/8" 630 GE-SR-08 3/8 630 GE-SRed-08 3/8
S 8 1/2" 630 GE-SR-08 1/2 630 GE-SRed-08 1/2
S 10 1/4" 630 GE-SR-10 1/4 630 GE-SRed-10 1/4
S 10 3/8"* 630 GE-SR-10 3/8 630 GE-SRed-10 3/8
S 10 1/2" 630 GE-SR-10 1/2 630 GE-SRed-10 1/2
S 12 1/4" 630 GE-SR-12 1/4 630 GE-SRed-12 1/4
S 12 3/8" * 630 GE-SR-12 3/8 630 GE-SRed-12 3/8
S 12 1/2" 630 GE-SR-12 1/2 630 GE-SRed-12 1/2
S 12 3/4" 630 GE-SR-12 3/4 630 GE-SRed-12 3/4
S 12 1" 630 GE-SRed-12/1
S 14 3/8" 630 GE-SR-14 3/8 630 GE-SRed-14 3/8
S 14 1/2" * 630 GE-SR-14 1/2 630 GE-SRed-14 1/2
S 14 3/4" 630 GE-SR-14 3/4
S 16 3/8" 400 GE-SR-16 3/8 400 GE-SRed-16 3/8
S 16 1/2" * 400 GE-SR-16 1/2 400 GE-SRed-16 1/2
S 16 3/4" 400 GE-SR-16 3/4 400 GE-SRed-16 3/4
S 16 1" 400 GE-SR-16/1
S 20 1/2" 400 GE-SR-20 1/2 400 GE-SRed-20 1/2
S 20 3/4" * 400 GE-SR-20 3/4 400 GE-SRed-20 3/4
S 20 1" 400 GE-SR-20/1 400 GE-SRed-20/1
S 25 1/2" 400 GE-SR-25 1/2 400 GE-SRed-25 1/2
S 25 3/4" 400 GE-SR-25 3/4 400 GE-SRed-25 3/4
S 25 1" * 400 GE-SR-25/1 400 GE-SRed-25/1
S 25 1-1/4" 400 GE-SR-25 11/4 400 GE-SRed-25 11/4
S 25 1-1/2" 400 GE-SR-25 11/2
S 30 3/4" 250 GE-SR-30 3/4
S 30 1" 250 GE-SR-30/1 400 GE-SRed-30/1
S 30 1-1/4" * 250 GE-SR-30 11/4 400 GE-SRed-30 11/4
S 30 1-1/2" 250 GE-SR-30 11/2 400 GE-SRed-30 11/2
S 38 3/4" 315 GE-SRed-38 3/4
S 38 1" 250 GE-SR-38/1 315 GE-SRed-38/1
S 38 1-1/4" 250 GE-SR-38 11/4 315 GE-SRed-38 11/4
S 38 1-1/2" * 250 GE-SR-38 11/2 315 GE-SRed-38 11/2

MALE CONNECTORS: METRIC PORT THREADS (LL)
Male Connector Metric Taper Thread
Tube Working
Port
Series Size Pressure Part Number
Thread
(mm) (bar)
LL 4 M6X1 100 GE-LLM-04 M6X1

LL 4 M8X1* 100 GE-LLM-04
LL 4 M10X1 100 GE-LLM-04 M10X1
LL 5 M8X1* 100 GE-LLM-05
LL 6 M6X1 100 GE-LLM-06 M6X1
LL 6 M8X1 100 GE-LLM-06 M8X1
LL 6 M10X1* 100 GE-LLM-06
LL 8 M10X1* 100 GE-LLM-08
LL 10 M14X1.5 100 GE-LLM-10
LL 12 M16X1.5 100 GE-LLM-12

MALE CONNECTORS: METRIC PORT THREADS (L)
Male Connector Male Connector Metric

Metric Straight Thread Straight Thread with Seal
Tube Working Working

Port
Series Size Pressure Part Number Pressure Part Number
Thread
(mm) (bar) (bar)
L 6 M8x1 315 GE-LM-06 M8x1

L 6 M10x1 * 315 GE-LM-06 400 GE-LMed-06
L 6 M12x1.5 315 GE-LM-06 M12x1.5
L 6 M14x1.5 315 GE-LM-06 M14x1.5
L 8 M12x1.5 * 315 GE-LM-08 400 GE-LMed-08
L 8 M14x1.5 315 GE-LM-08 M14x1.5 400 GE-LMed-08 M14x1.5
L 8 M22x1.5 315 GE-LM-08 M22x1.5
L 10 M12x1.5 315 GE-LM-10 M12x1.5 400 GE-LMed-10 M12X1.5
L 10 M14x1.5 * 315 GE-LM-10 400 GE-LMed-10
L 12 M12x1.5 315 GE-LM-12 M12x1.5
L 12 M16x1.5 * 315 GE-LM-12 400 GE-LMed-12
L 15 M18x1.5 * 315 GE-LM-15 400 GE-LMed-15
L 18 M22x1.5 * 315 GE-LM-18 315 GE-LMed-18
L 18 M26x1.5 315 GE-LMed-18 M26X1.5
L 22 M26x1.5 * 250 GE-LM-22 315 GE-LMed-22
L 28 M26x1.5 250 GE-LM-28 M26x1.5
L 28 M33x2 * 250 GE-LM-28 250 GE-LMed-28
L 35 M33x2 250 GE-LMed-35 M33X2
L 35 M42x2 * 250 GE-LM-35 250 GE-LMed-35
L 42 M48x2 * 250 GE-LM-42 250 GE-LMed-42

MALE CONNECTORS: METRIC PORT THREADS (S)
Male Connector Male Connector Metric

Metric Straight Thread Straight Thread with Seal

Port
Series Size Pressure Part Number Pressure Part Number
Thread
(mm) (bar) (bar)
S 6 M12x1.5 * 630 GE-SM-06 630 GE-SMed-06

S 8 M14x1.5 * 630 GE-SM-08 630 GE-SMed-08
S 10 M12x1.5 630 GE-SM-10 M12x1.5
S 10 M16x1.5 * 630 GE-SM-10 630 GE-SMed-10
S 10 M18x1.5 630 GE-SM-10 M18x1.5
S 10 M22x1.5 630 GE-SM-10 M22x1.5
S 12 M14x1.5 630 GE-SM-12 M14x1.5
S 12 M18x1.5 * 630 GE-SM-12 630 GE-SMed-12
S 12 M20x1.5 630 GE-SM-12 M20x1.5
S 12 M22x1.5 630 GE-SM-12 M22x1.5 630 GE-SMed-12 M22x1.5
S 14 M16x1.5 630 GE-SM-14 M16x1.5
S 14 M18x1.5 630 GE-SM-14 M18x1.5
S 14 M20x1.5 * 630 GE-SM-14 630 GE-SMed-14
S 14 M22x1.5 630 GE-SM-14 M22x1.5
S 16 M16x1.5 400 GE-SM-16 M16x1.5
S 16 M18x1.5 400 GE-SM-16 M18x1.5 400 GE-SMed-16 M18x1.5
S 16 M22x1.5 * 400 GE-SM-16 400 GE-SMed-16
S 16 M27x2 400 GE-SM-16 M27x2
S 20 M18x1.5 400 GE-SM-20 M18x1.5
S 20 M22x1.5 400 GE-SM-20 M22x1.5
S 20 M26x1.5 400 GE-SM-20 M26x1.5
S 20 M27x2 * 400 GE-SM-20 400 GE-SMed-20
S 25 M27x2 400 GE-SMed-25 M27x2
S 25 M33x2 * 400 GE-SM-25 400 GE-SMed-25
S 25 M48x2 400 GE-SM-25 M48x2
S 30 M42x2 * 250 GE-SM-30 400 GE-SMed-30
S 38 M48x2 * 250 GE-SM-38 315 GE-SMed-38
* Indicates standard port thread for given tube size.

MALE CONNECTORS: SAE PORT THREADS (L)
Male Connector
SAE O-ring Thread
Tube
Working Port Dash SAE Port
Series Size Part Number
Pressure (bar) Size Thread
(mm)
L 6 400 -4 7/16 - 20 GE-L-06 7/16 UNF

L 6 400 -6 9/16 - 18 GE-L-06 9/16 UNF
L 8 400 -4 7/16 - 20 GE-L-08 7/16 UNF
L 8 400 -5 1/2 - 20 GE-L-08 1/2 UNF
L 8 400 -6 9/16 - 18 GE-L-08 9/16 UNF
L 10 400 -4 7/16 - 20 GE-L-10 7/16 UNF
L 10 400 -6 9/16 - 18 GE-L-10 9/16 UNF
L 10 400 -8 3/4 - 16 GE-L-10 3/4 UNF
L 12 400 -6 9/16 - 18 GE-L-12 9/16 UNF
L 12 400 -8 3/4 - 16 GE-L-12 3/4 UNF
L 12 400 -10 7/8 - 14 GE-L-12 7/8 UNF
L 15 400 -8 3/4 - 16 GE-L-15 3/4 UNF
L 15 400 -10 7/8 - 14 GE-L-15 7/8 UNF
L 18 315 -8 3/4 - 16 GE-L-18 3/4 UNF
L 18 315 -10 7/8 - 14 GE-L-18 7/8 UNF
L 22 315 -10 7/8 - 14 GE-L-22 7/8 UNF
L 22 315 -12 1 1/16 - 12 GE-L-22 1-1/16 UN
L 22 315 -16 1 5/16 - 12 GE-L-22 1-5/16 UN
L 28 250 -12 1 1/16 - 12 GE-L-28 1-1/16 UN
L 28 250 -16 1 5/16 - 12 GE-L-28 1-5/16 UN
L 35 250 -16 1 5/16 - 12 GE-L-28 1-5/16 UN
L 35 250 -20 1 5/8 - 12 GE-L-35 1-5/8 UN
L 42 250 -20 1 5/8 - 12 GE-L-42 1-5/8 UN
L 42 250 -24 1 7/8 - 12 GE-L-42 1-7/8 UN

MALE CONNECTORS: SAE PORT THREADS (S)
Male Connector SAE O-ring Thread
Tube Working Port SAE

Series Size Pressure Dash Port Part Number
(mm) (bar) Size Thread
S 6 630 -4 7/16 - 20 GE-S-06 7/16 UNF

S 8 630 -4 7/16 - 20 GE-S-08 7/16 UNF
S 8 630 -5 1/2 - 20 GE-S-08 1/2 UNF
S 10 630 -6 9/16 - 18 GE-S-10 9/16 UNF
S 10 630 -8 3/4 - 16 GE-S-10 3/4 UNF
S 12 630 -6 9/16 - 18 GE-S-12 9/16 UNF
S 12 630 -8 3/4 - 16 GE-S-12 3/4 UNF
S 12 630 -10 7/8 - 14 GE-S-12 7/8 UNF
S 14 630 -8 3/4 - 16 GE-S-14 3/4 UNF
S 16 400 -8 3/4 - 16 GE-S-16 3/4 UNF
S 16 400 -10 7/8 - 14 GE-S-16 7/8 UNF
S 16 400 -12 1 1/16 - 12 GE-S-16 1-1/16 UN
S 20 400 -8 3/4 - 16 GE-S-20 3/4 UNF
S 20 400 -10 7/8 - 14 GE-S-20 7/8 UNF
S 20 400 -12 1 1/16 - 12 GE-S-20 1-1/16 UN
S 20 400 -16 1 5/16 - 12 GE-S-20 1-5/16 UN
S 25 400 -12 1 1/16 - 12 GE-S-25 1-1/16 UN
S 25 400 -16 1 5/16 - 12 GE-S-25 1-5/16 UN
S 30 400 -16 1 5/16 - 12 GE-S-30 1-5/16 UN
S 30 400 -20 1 5/8 - 12 GE-S-30 1-5/8 UN
S 38 315 -20 1 5/8 - 12 GE-S-38 1-5/8 UN
S 38 315 -24 1 7/8 - 12 GE-S-38 1-7/8 UN

MALE CONNECTORS: ISO 6149 THREAD
Male Connector ISO 6149
Port Working
Tube Size
Series Thread Pressure Part Number
(mm)
Metric (bar)
L 6 M10x1 400 GEO-LM-06

L 8 M12x1.5 400 GEO-LM-08
L 10 M14x1.5 400 GEO-LM-10
L 12 M16x1.5 400 GEO-LM-12
L 15 M18x1.5 400 GEO-LM-14
L 18 M22x1.5 315 GEO-LM-18
L 22 M27x2 315 GEO-LM-22
L 28 M33x2 250 GEO-LM-28
L 35 M42x2 250 GEO-LM-35
L 42 M48x2 250 GEO-LM-42
S 6 M12x1.5 630 GEO-SM-06
S 8 M14x1.5 630 GEO-SM-08
S 10 M16x1.5 630 GEO-SM-10
S 12 M18x1.5 630 GEO-SM-12
S 14 M20x1.5 630 GEO-SM-14
S 16 M22x1.5 400 GEO-SM-16
S 20 M27x2 400 GEO-SM-20
S 25 M33x2 400 GEO-SM-25
S 30 M42x2 400 GEO-SM-30
S 38 M48x2 315 GEO-SM-38

ELBOW MALE CONNECTORS - BSP AND NPT PORT THREADS
Male Elbow Connector BSP Thread Male Elbow Connector NPT Thread
Tube Working Port Working Port
Series Size Pressure Thread Part Number Pressure Thread Part Number
(mm) (bar) BSPT/BSPP (bar) NPT
LL 4 100 1/8" BSPT WE-LLR-04 1/8 100 1/8" WE-LL-04 1/8
LL 6 100 1/4" BSPT WE-LLR-06 1/4
LL 10 100 1/4" BSPT WE-LLR-10 1/4
LL 12 100 1/4" BSPT WE-LLR-12 1/4
LL 15 100 3/8" BSPT WE-LLR-15 3/8
L 6 315 1/8" BSPT WE-LR-06 1/8 315 1/8" WE-L-06 1/8
L 6 315 1/4" BSPT WE-LR-06 1/4 315 1/4" WE-L-06 1/4
L 6 315 3/8" BSPT WE-LR-06 3/8
L 8 315 1/8" BSPT WE-LR-08 1/8 315 1/8" WE-L-08 1/8
L 8 315 1/4" BSPT WE-LR-08 1/4 315 1/4" WE-L-08 1/4
L 8 315 3/8" BSPT WE-LR-08 3/8
L 8 315 1/2" BSPT WE-LR-08 1/2
L 10 315 1/8" BSPT WE-LR-10 1/8
L 10 315 1/4" BSPT WE-LR-10 1/4 315 1/4" WE-L-10 1/4
L 10 315 3/8" BSPT WE-LR-10 3/8 315 3/8" WE-L-10 3/8
L 10 315 1/2" BSPT WE-LR-10 1/2 315 1/2" WE-L-10 1/2
L 12 315 1/4" BSPT WE-LR-12 1/4 315 1/4" WE-L-12 1/4
L 12 315 3/8" BSPT WE-LR-12 3/8 315 3/8" WE-L-12 3/8
L 12 315 1/2" BSPT WE-LR-12 1/2 315 1/2" WE-L-12 1/2
L 15 315 3/8" BSPT WE-LR-15 3/8
L 15 315 1/2" BSPT WE-LR-15 1/2 315 1/2" WE-L-15 1/2
L 18 315 1/2" BSPT WE-LR-18 1/2 315 1/2" WE-L-18 1/2
L 18 315 3/4" BSPT WE-LR-18 3/4
L 22 250 3/4" BSPP WE-LR-22 3/4 Ú 160 3/4" WE-L-22 3/4
L 28 250 1" BSPP WE-LR-28/1 Ú 160 1" WE-L-28/1
L 35 250 1-1/4" BSPP WE-LR-35 11/4 Ú 160 1 1/4" WE-L-35 11/4
L 42 250 1-1/2" BSPP WE-LR-42 11/2 Ú 160 1 1/2" WE-L-42 11/2
S 6 400 1/4" BSPT WE-SR-06 1/4 630 1/4" WE-S-06 1/4
S 8 400 1/4" BSPT WE-SR-08 1/4 630 1/4" WE-S-08 1/4
S 10 630 1/4" WE-S-10 1/4
S 10 400 3/8" BSPT WE-SR-10 3/8 630 3/8" WE-S-10 3/8
S 10 400 1/2" BSPT WE-SR-10 1/2 630 1/2" WE-S-10 1/2
S 12 400 3/8" BSPT WE-SR-12 3/8 630 3/8" WE-S-12 3/8
S 12 400 1/2" BSPT WE-SR-12 1/2 630 1/2" WE-S-12 1/2
S 14 400 1/2" BSPT WE-SR-14 1/2 630 1/2" WE-S-14 1/2
S 16 400 3/8" BSPT WE-SR-16 3/8
S 16 400 1/2" BSPT WE-SR-16 1/2 400 1/2" WE-S-16 1/2
S 16 400 3/4" BSPT WE-SR-16 3/4 400 3/4" WE-S-16 3/4
S 20 400 3/4" BSPP WE-SR-20 3/4 Ú 400 3/4" WE-S-20 3/4
S 25 400 1" BSPP WE-SR-25/1 Ú 400 1" WE-S-25/1
S 30 250 1-1/4" BSPP WE-SR-30 11/4 Ú 400 1 1/4" WE-S-30 11/4
S 38 250 1-1/2" BSPP WE-SR-38 11/2 Ú 315 1 1/2" WE-S-38 11/2
ÚItem to be discontinued when stock depleted.

ELBOW MALE CONNECTORS: METRIC PORT THREADS
Male Elbow Connector Metric Thread
Tube Working Port

Series Part Number
Size (mm) Pressure (bar) Thread
LL 4 100 M6x1 Taper WE-LLM-04 M6x1

LL 4 100 M8x1 Taper WE-LLM-04
L 6 315 M8x1 Taper WE-LM-06 M8x1
L 6 315 M10x1Taper WE-LM-06
L 8 315 M12x1.5 Taper WE-LM-08
L 10 315 M14x1.5 Taper WE-LM-10
L 12 315 M16x1.5 Taper WE-LM-12
L 15 315 M18x1.5 Taper WE-LM-15
L 18 315 M22x1.5 Taper WE-LM-18
L 22 160 M26x1.5 WE-LM-22 Ú
L 28 160 M33x2 WE-LM-28 Ú
L 35 160 M42x2 WE-LM-35 Ú
L 42 160 M48x2 WE-LM-42 Ú
S 6 400 M12x1.5 Taper WE-SM-06
S 8 400 M14x1.5 Taper WE-SM-08
S 10 400 M16x1.5 Taper WE-SM-10
S 12 400 M18x1.5 Taper WE-SM-12
S 14 400 M20x1.5 Taper WE-SM-14
S 16 400 M22x1.5 Taper WE-SM-16
S 20 250 M27x2 WE-SM-20 Ú
S 25 250 M33X2 WE-SM-25 Ú
S 30 160 M42x2 WE-SM-30 Ú
S 38 160 M48x2 WE-SM-38 Ú
Ú Item to be discontinued when stock depleted.
For parallel thread elbow connector to replace WE-, use WEE- series.

ADJUSTABLE MALE ELBOWS: BSPP & METRIC
Adjustable Male Elbow BSPP Adjustable Male Elbow Metric

Port Port
Size Pressure Pressure
Series Thread Part Number Thread Part Number
(mm) (bar) (bar)
BSPP Metric
L 6 315 1/8" WEE-LR-06 1/8 315 M10x1 WEE-LM-06 M10x1

L 8 315 1/4" WEE-LR-08 1/4 315 M12x1.5 WEE-LM-08 M12x1.5
L 22 160 3/4" WEE-LR-22 3/4 160 M27x2 WEE-LM-22 M27x2
L 28 160 1" WEE-LR-28/1 160 M33x2 WEE-LM-28 M33x2
L 35 160 1-1/4" WEE-LR-35 11/4 160 M42x2 WEE-LM-35 M42x2
L 42 160 1-1/2" WEE-LR-42 11/2 160 M48x2 WEE-LM-42 M48x2
S 6 315 1/4" WEE-SR-06 1/4 315 M12x1.5 WEE-SM-06 M12x1.5
S 20 180 3/4" WEE-SR-20 3/4 250 M27x2 WEE-SM-20 M27x2
S 25 180 1" WEE-SR-25/1 160 M33x2 WEE-SM-25 M33x2
S 30 160 1-1/4" WEE-SR-30 11/4 160 M42x2 WEE-SM-30 M42x2
S 38 160 1-1/2" WEE-SR-38 11/2 160 M48x2 WEE-SM-38 M48x2

ADJUSTABLE MALE ELBOWS: ISO 6149 & SAE O-RING
Adjustable Male Elbow Adjustable Male Elbow

Metric Parallel ISO 6149 SAE O-ring

(mm) (bar) Metric (bar) UN, UNF
L 6 315 M10x1 WEO-LM-06 M10x1 315 7/16"-20 WEO-L-06 7/16UNF

L 8 315 M12x1.5 WEO-LM-08 M12x1.5 315 1/2"-20 WEO-L-08 1/2UNF
L 12 315 315 3/4"-16 WEO-L-12 3/4UNF
L 15 315 315 3/4"-16 WEO-L-15 3/4UNF
L 18 315 315 1 1/16"- WEO-L-18 1 1/16 UN
L 22 160 M27x2 WEO-LM-22 M27x2 160 1 1/16"- WEO-L-22 1 1/16 UN
L 28 160 M33x2 WEO-LM-28 M33x2 160 1 5/16"- WEO-L-28 1 5/16 UN
L 35 160 M42x2 WEO-LM-35 M42x2 160 1 5/8"-12 WEO-L-35 1 5/8 UN
L 42 160 M48x2 WEO-LM-42 m48x2 160 1 7/8"-12 WEO-L-42 1 7/8 UN
S 6 400 M12x1.5 WEO-SM-06 M12x1.5 400 7/16"-20 WEO-S-06 7/16UNF
S 20 400 M27x2 WEO-SM-20 M27x2 400 1 1/16"- WEO-S-20 1 1/16 UN
S 25 315 M33x2 WEO-SM-25 M33x2 400 1 5/16"- WEO-S-25 1 5/16 UN
S 30 250 M42x2 WEO-SM-30 M42x2 250 1 5/8"-12 WEO-S-30 1 5/8 UN
S 38 250 M48x2 WEO-SM-38 M48x2 250 1 7/8"-12 WEO-S-38 1 7/8 UN

ADJUSTABLE MALE ELBOWS 45E: BSPP & METRIC
Male Stud Elbow 45E BSPP Male Stud Elbow 45E Metric

(mm) (bar) BSPP (bar) Metric
L 6 315 1/8" WEE45-LR-061/8 500 M10x1 WEE45-LM-06 M10x1

L 8 315 1/4" WEE45-LR-081/4 500 M12x1.5 WEE45-LM-08 M12x1.5
L 22 160 3/4" WEE45-LR-223/4 250 M27x2 WEE45-LM-22 M27x2
L 28 160 1" WEE45-LR-28/1 250 M33x2 WEE45-LM-28 M33x2
L 35 160 1-1/4" WEE45-LR-3511/4 250 M42x2 WEE45-LM-35 M42x2
L 42 160 1-1/2" WEE45-LR-4211/2 250 M48x2 WEE45-LM-42 M48x2
S 6 315 1/4" WEE45-SR-061/4 500 M12x1.5 WEE45-SM-06 M12x1.5
S 20 180 3/4" WEE45-SR-203/4 400 M27x2 WEE45-SM-20 M27x2
S 25 180 1" WEE45-SR-25/1 250 M33x2 WEE45-SM-25 M33x2
S 30 160 1-1/4" WEE45-SR-3011/4 250 M42x2 WEE45-SM-30 M42x2
S 38 160 1-1/2" WEE45-SR-3811/2 250 M48x2 WEE45-SM-38 M48x2

MALE TEE CONNECTORS: BSP & BSPP PORT THREADS
Run Tee Connector Branch Tee Connector

BSP Thread BSP Thread
Tube Port Working

Series Size Thread Pressure Part Number Part Number
(mm) (bar)
LL 4 1/8" BSPT 100 LE-LLR-04 1/8 TE-LLR-04 1/8

L 6 1/8" BSPT 315 LE-LR-06 1/8 TE-LR-06 1/8
L 6 1/4" BSPT 315 LE-LR-06 1/4 Ú TE-LR-06 1/4 Ú
L 8 1/4" BSPT 315 LE-LR-08 1/4 TE-LR-08 1/4
L 10 1/4" BSPT 315 LE-LR-10 1/4 TE-LR-10 1/4
L 12 1/4" BSPT 315 LE-LR-12 1/4 Ú TE-LR-12 1/4 Ú
L 12 3/8" BSPT 315 LE-LR-12 3/8 TE-LR-12 3/8
L 15 3/8" BSPT 315 LE-LR-15 3/8 Ú
L 15 1/2" BSPT 315 LE-LR-15 1/2 TE-LR-15 1/2
L 18 1/2" BSPT 315 LE-LR-18 1/2 TE-LR-18 1/2
L 22 3/4" BSPP 160 LE-LR-22 3/4 Ú TE-LR-22 3/4 Ú
L 28 1" BSPP 160 LE-LR-28/1 Ú TE-LR-28/1 Ú
L 35 1-1/4" BSPP 160 LE-LR-35 11/4 Ú TE-LR-35 11/4 Ú
L 42 1-1/2" BSPP 160 LE-LR-42 11/2 Ú TE-LR-42 11/2 Ú
S 6 1/4" BSPT 400 LE-SR-06 1/4 TE-SR-06 1/4
S 8 1/4" BSPT 400 LE-SR-08 1/4 TE-SR-08 1/4
S 10 3/8" BSPT 400 LE-SR-10 3/8 TE-SR-10 3/8
S 12 3/8" BSPT 400 LE-SR-12 3/8 TE-SR-12 3/8
S 14 1/2" BSPT 400 LE-SR-14 1/2 TE-SR-14 1/2
S 16 1/2" BSPT 400 LE-SR-16 1/2 TE-SR-16 1/2
S 20 3/4" BSPP 250 LE-SR-20 3/4 Ú TE-SR-20 3/4 Ú
S 25 1" BSPP 250 LE-SR-25/1 Ú TE-SR-25/1 Ú
S 30 1-1/4" BSPP 160 LE-SR-30 11/4 Ú TE-SR-30 11/4 Ú
S 38 1-1/2" BSPP 160 LE-SR-38 11/2 Ú TE-SR-38 11/2 Ú
For parallel thread run tee to replace LE- use LEE- series.
For parallel thread branch tee to replace TE- use TEE- series.

MALE TEE CONNECTORS: METRIC PORT THREADS
Run Tee Branch Tee

Connector Connector
Metric Thread Metric Thread
Tube Working
Port
Thread
(mm) (bar)
LL 4 100 M8x1 Taper LE-LLM-04 TE-LLM-04

LL 10 100 M14x1.5 Taper TE-LLM-10
LL 12 100 M16x1.5 Taper TE-LLM-12
L 6 315 M10x1 Taper LE-LM-06 TE-LM-06
L 8 315 M12x1.5 Taper LE-LM-08 TE-LM-08
L 22 160 M26x1.5 LE-LM-22 Ú TE-LM-22 Ú
L 28 160 M33x2 LE-LM-28 Ú TE-LM-28 Ú
L 35 160 M42x2 LE-LM-35 Ú TE-LM-35 Ú
L 42 160 M48x2 LE-LM-42 Ú TE-LM-42 Ú
S 6 400 M12x1.5 Taper LE-SM-06 TE-SM-06
S 20 250 M27x2 LE-SM-20 Ú TE-SM-20 Ú
S 25 250 M33X2 LE-SM-25 Ú TE-SM-25 Ú
S 30 160 M42x2 LE-SM-30 Ú TE-SM-30 Ú
S 38 160 M48x2 LE-SM-38 Ú TE-SM-38 Ú
For parallel thread run tee to replace LE- use LEE- series.
For parallel thread branch tee to replace TE- use TEE- series.

MALE TEE CONNECTORS: NPT PORT THREADS
Run Tee Connector Branch Tee Connector

NPT Thread NPT Thread
Port Working
Tube Size
Series Thread Pressure Part Number Part Number
(mm)
NPT (bar)
LL 4 1/8" 100 LE-LL-04 1/8 TE-LL-04 1/8

LL 5 1/8" 100 LE-LL-05 1/8 TE-LL-05 1/8
LL 6 1/8" 100 LE-LL-06 1/8 TE-LL-06 1/8
LL 8 1/8" 100 LE-LL-08 1/8 TE-LL-08 1/8
L 6 1/8" 500 LE-L-06 1/8 TE-L-06 1/8
L 8 1/4" 500 LE-L-08 1/4 TE-L-08 1/4
L 10 1/4" 500 LE-L-10 1/4 TE-L-10 1/4
L 12 3/8" 400 LE-L-12 3/8 TE-L-12 3/8
L 15 1/2" 400 LE-L-15 1/2 TE-L-15 1/2
L 18 1/2" 400 LE-L-18 1/2 TE-L-18 1/2
L 22 3/4" 250 LE-L-22 3/4 TE-L-22 3/4
L 28 1" 250 LE-L-28/1 TE-L-28/1
L 35 1-1/4" 250 LE-L-35 11/4 TE-L-35 11/4
L 42 1-1/2" 250 LE-L-42 11/2 TE-L-42 11/2
S 6 1/4" 800 LE-S-06 1/4 TE-S-06 1/4
S 8 1/4" 800 LE-S-08 1/4 TE-S-08 1/4
S 10 1/4" 800 LE-S-10 3/8 TE-S-10 3/8
S 12 3/8" 630 LE-S-12 3/8 TE-S-12 3/8
S 12 1/2" 630 LE-S-12 1/2
S 14 1/2" 630 LE-S-14 1/2 TE-S-14 1/2
S 16 1/2" 630 LE-S-16 1/2 TE-S-16 1/2
S 20 3/4" 400 LE-S-20 3/4 TE-S-20 3/4
S 25 1" 400 LE-S-25/1 TE-S-25/1
S 30 1-1/4" 400 LE-S-30 11/4 TE-S-30 11/4
S 38 1-1/2" 400 LE-S-38 11/2 TE-S-38 11/2

ADJUSTABLE MALE TEE CONNECTORS: BSPP PORT THREADS
Adjustable Run Tee Adjustable Branch Tee

BSPP Thread BSPP Thread
Tube Port Working

(mm) BSPP (bar)
L 6 1/8" 315 LEE-LR-06 1/8 TEE-LR-06 1/8

L 8 1/4" 315 LEE-LR-08 1/4 TEE-LR-08 1/4
L 10 1/4" 315 LEE-LR-10 1/4 TEE-LR-10 1/4
L 12 3/8" 315 LEE-LR-12 3/8 TEE-LR-12 3/8
L 15 1/2" 200 LEE-LR-15 1/2 TEE-LR-15 1/2
L 18 1/2" 200 LEE-LR-18 1/2 TEE-LR-18 1/2
L 22 3/4" 160 LEE-LR-22 3/4 TEE-LR-22 3/4
L 28 1" 160 LEE-LR-28/1 TEE-LR-28/1
L 35 1-1/4" 160 LEE-LR-35 11/4 TEE-LR-35 11/4
L 42 1-1/2" 160 LEE-LR-42 11/2 TEE-LR-42 11/2
S 6 1/4" 315 LEE-SR-06 1/4 TEE-SR-06 1/4
S 8 1/4" 315 LEE-SR-08 1/4 TEE-SR-08 1/4
S 10 3/8" 315 LEE-SR-10 3/8 TEE-SR-10 3/8
S 12 3/8" 315 LEE-SR-12 3/8 TEE-SR-12 3/8
S 14 1/2" 200 LEE-SR-14 1/2 TEE-SR-14 1/2
S 16 1/2" 200 LEE-SR-16 1/2 TEE-SR-16 1/2
S 20 3/4" 180 LEE-SR-20 3/4 TEE-SR-20 3/4
S 25 1" 180 LEE-SR-25/1 TEE-SR-25/1
S 30 1-1/4" 160 LEE-SR-30 11/4 TEE-SR-30 11/4
S 38 1-1/2" 160 LEE-SR-38 11/2 TEE-SR-38 11/2

ADJUSTABLE MALE TEE CONNECTORS: METRIC PORT THREADS

Tube Port Working

(mm) Metric (bar)
L 6 M10x1 315 LEE-LM-06 M10x1 TEE-LM-06 M10x1

L 8 M12x1.5 315 LEE-LM-08 M12x1.5 TEE-LM-08 M12x1.5
S 6 M12x1.5 315 LEE-SM-06 M12x1.5 TEE-SM-06 M12x1.5
S 20 M27x2 180 LEE-SM-20 M27x2 TEE-SM-20 M27x2

ADJUSTABLE MALE TEE CONNECTORS: ISO 6149 & METRIC PORT THREADS

ISO 6149 ISO 6149
Series Tube Port Working

Size Thread Pressure Part Number Part Number
(mm) Metric (bar)
L 6 M10x1 315 LEO-LM-06 TEO-LM-06

L 8 M12x1.5 315 LEO-LM-08 TEO-LM-08
L 10 M14x1.5 315 LEO-LM-10 TEO-LM-10
L 12 M16x1.5 315 LEO-LM-12 TEO-LM-12
L 15 M18x1.5 200 LEO-LM-15 TEO-LM-15
L 18 M22x1.5 200 LEO-LM-18 TEO-LM-18
L 22 M27x2 160 LEO-LM-22 TEO-LM-22
L 28 M33x2 160 LEO-LM-28 TEO-LM-28
L 35 M42x2 160 LEO-LM-35 TEO-LM-35
L 42 M48x2 160 LEO-LM-42 TEO-LM-42
S 6 M12x1.5 315 LEO-SM-06 TEO-SM-06
S 8 M14x1.5 315 LEO-SM-08 TEO-SM-08
S 10 M16x1.5 315 LEO-SM-10 TEO-SM-10
S 12 M18x1.5 315 LEO-SM-12 TEO-SM-12
S 14 M20x1.5 200 LEO-SM-14 TEO-SM-14
S 16 M22x1.5 200 LEO-SM-16 TEO-SM-16
S 20 M27x2 180 LEO-SM-20 TEO-SM-20
S 25 M33x2 180 LEO-SM-25 TEO-SM-25
S 30 M42x2 160 LEO-SM-30 TEO-SM-30
S 38 M48x2 160 LEO-SM-38 TEO-SM-38

ADJUSTABLE MALE TEE CONNECTORS: SAE PORT THREADS

SAE Thread SAE Thread
Tube Port Working

(mm) SAE (bar)
L 6 7/16"-20 315 LEO-L-06 7/16 UNF TEO-L-06 7/16 UNF

L 22 1 1/16"-12 160 LEO-L-22 1 1/16 UN TEO-L-22 1 1/16 UN
L 28 1 5/16"-12 160 LEO-L-28 1 5/16 UN TEO-L-28 1 5/16 UN
L 35 1 5/8"-12 160 LEO-L-35 1 5/8 UN TEO-L-35 1 5/8 UN
L 42 1 7/8"-12 160 LEO-L-42 1 7/8 UN TEO-L-42 1 7/8 UN
S 6 7/16"-20 315 LEO-S-06 7/16 UNF TEO-S-06 7/16 UNF
S 20 1 1/16"-12 180 LEO-S-20 1 1/16 UN TEO-S-20 1 1/16 UN
S 25 1 5/16"-12 180 LEO-S-25 1 5/16 UN TEO-S-25 1 5/16 UN
S 30 1 5/8"-12 160 LEO-S-30 1 5/8 UN TEO-S-30 1 5/8 UN
S 38 1 7/8"-12 160 LEO-S-38 1 7/8 UN TEO-S-38 1 7/8 UN

BANJO MALE CONNECTORS: BSPP & METRIC PORT THREADS
Free Flow Banjo 2 Piece Free Flow Banjo 2 Piece

Bolt BSPP Thread Bolt Metric Thread

(mm) (bar)* BSPP Metric
L 6 250 1/8" DSVW-LR-06 M10x1 DSVW-LM-06

L 8 250 1/4" DSVW-LR-08 M12x1.5 DSVW-LM-08
L 12 250 1/2" DSVW-LR-12 1/2
L 18 100 M26x1.5 DSVW-LM-18 M26X1.5
L 28 100 1" DSVW-LR-28 M33x2 DSVW-LM-28
L 35 100 1 1/4" DSVW-LR-35 M42x2 DSVW-LM-35
L 42 100 1 1/2" DSVW-LR-42 M48x2 DSVW-LM-42
S 6 400 1/4" DSVW-SR-06 M12x1.5 DSVW-SM-06
S 10 400 M18x1.5 DSVW-SM-10 M18x1.5
S 20 400 3/4" DSVW-SR-20 M27x2 DSVW-SM-20
S 20 400 1" DSVW-SR-20/1
S 25 250 1" DSVW-SR-25 M33x2 DSVW-SM-25
S 30 250 1-1/4" DSVW-SR-30 M42x2 DSVW-SM-30
S 38 250 1-1/2" DSVW-SR-38 M48x2 DSVW-SM-38
* Safety factor 2.5

Standard Banjo Through Standard Banjo Through


(mm) (bar)* BSPP Metric
LL 4 100 1/8" SWVE-LLR-04 M8 x 1 SWVE-LLM-04

L 6 250 1/8" SWVE-LR-06 M10 x 1 SWVE-LM-06
L 8 250 1/4" SWVE-LR-08 M12 x 1.5 SWVE-LM-08
S 6 250 1/4" SWVE-SR-06 M12 x 1.5 SWVE-SM-06
S 20 160 3/4" SWVE-SR-20 M27x2 SWVE-SM-20
* Safety factor 2.5

Free Flow Banjo Through Free Flow Banjo Through

Working Port Port

Tube
Series Pressure Thread Part Number Thread Part Number
Size (mm)
(bar)* BSPP Metric
L 6 400 1/8" WHO-LR-06 M10 x 1 WHO-LM-06

L 8 400 1/4" WHO-LR-08 M12 x 1.5 WHO-LM-08
L 10 400 1/4" WHO-LR-10 M14 x 1.5 WHO-LM-10
L 12 400 1/4" WHO-LR-12 1/4
L 12 400 3/8" WHO-LR-12 M18 x 1.5 WHO-LM-12
L 15 400 1/2" WHO-LR-15 M20 x 1.5 WHO-LM-15
L 18 400 1/2" WHO-LR-18 M22 x 1.5 WHO-LM-18
L 22 315 3/4" WHO-LR-22 M26 x 1.5 WHO-LM-22
L 28 250 1" WHO-LR-28 M33 x 2 WHO-LM-28
L 35 250 1-1/4" WHO-LR-35 M42 x 2 WHO-LM-35
L 42 250 1-1/2" WHO-LR-42 M48 x 2 WHO-LM-42
S 6 400 1/4" WHO-SR-06 M12 x 1.5 WHO-SM-06
S 8 400 1/4" WHO-SR-08 M14 x 1.5 WHO-SM-08
S 10 400 3/8" WHO-SR-10 M16 x 1.5 WHO-SM-10
S 12 400 3/8" WHO-SR-12 M18 x 1.5 WHO-SM-12
S 14 400 1/2" WHO-SR-14 M20 x 1.5 WHO-SM-14
S 16 400 1/2" WHO-SR-16 M22x1.5 WHO-SM-20
S 20 315 3/4" WHO-SR-20 M27x2 WHO-SM-20
S 25 250 1" WHO-SR-25 M33 x 2 WHO-SM-25
S 30 250 1-1/4" WHO-SR-30 M42 x 2 WHO-SM-30
S 38 250 1-1/2" WHO-SR-38 M48 x 2 WHO-SM-38
* Safety factor 2.5

BANJO TEE MALE CONNECTORS: BSPP & METRIC PORT THREADS
Banjo Tee BSPP Thread Banjo Tee Metric Thread

(mm) (bar) BSPP Metric
L 6 250 * 1/8" DSVT-LR-06 M10 x 1 DSVT-LM-06

L 8 250 * 1/4" DSVT-LR-08 M12 x 1.5 DSVT-LM-08
L 28 100 * 1" DSVT-LR-28 M33 x 2 DSVT-LM-28
L 35 100 * 1-1/4" DSVT-LR-35 M42 x 2 DSVT-LM-35
L 42 100 * 1-1/2" DSVT-LR-42 M48 x 2 DSVT-LM-42
S 6 400  1/4" DSVT-SR-06 M12 x 1.5 DSVT-SM-06
S 20 400  3/4" DSVT-SR-20 M27 x 2 DSVT-SM-20
S 25 250  1" DSVT-SR-25 M33 x 2 DSVT-SM-25
S 30 250  1-1/4" DSVT-SR-30 M42 x 2 DSVT-SM-30
S 38 250  1-1/2" DSVT-SR-38 M48 x 2 DSVT-SM-38
* Safety factor 2.5
 Safety factor 1.6

BANJO TEE MALE CONNECTORS: BSPP & METRIC PORT THREADS
Banjo Tee BSPP Thread Banjo Tee Metric Thread

Working Port Port
Tube
Series Pressure Thread Part Number Thread Part Number
Size (mm)
(bar)* BSPP Metric
L 6 400 1/8" WHT-LR-06 M10 x 1 WHT-LM-06

L 8 400 1/4" WHT-LR-08 M12 x 1.5 WHT-LM-08
L 10 400 1/4" WHT-LR-10 M14 x 1.5 WHT-LM-10
L 12 400 3/8" WHT-LR-12 M16 x 1.5 WHT-LM-12
L 15 400 1/2" WHT-LR-15 M18 x 1.5 WHT-LM-15
L 18 400 1/2" WHT-LR-18 M22 x 1.5 WHT-LM-18
L 22 315 3/4" WHT-LR-22 M26 x 1.5 WHT-LM-22
L 28 250 1" WHT-LR-28 M33 x 2 WHT-LM-28
L 35 250 1-1/4" WHT-LR-35 M42 x 2 WHT-LM-35
L 42 250 1-1/2" WHT-LR-42 M48 x 2 WHT-LM-42
S 6 400 1/4" WHT-SR-06 M12 x 1.5 WHT-SM-06
S 8 400 1/4" WHT-SR-08 M14 x 1.5 WHT-SM-08
S 10 400 3/8" WHT-SR-10 M16 x 1.5 WHT-SM-10
S 12 400 3/8" WHT-SR-12 M18 x 1.5 WHT-SM-12
S 14 400 1/2" WHT-SR-14 M20 x 1.5 WHT-SM-14
S 16 400 1/2" WHT-SR-16 M22 x 1.5 WHT-SM-16
S 20 315 3/4" WHT-SR-20 M27 x 2 WHT-SM-20
S 25 250 1" WHT-SR-25 M33 x 2 WHT-SM-25
S 30 250 1-1/4" WHT-SR-30 M42 x 2 WHT-SM-30
S 38 250 1-1/2" WHT-SR-38 M48 x 2 WHT-SM-38
* Safety factor 2.5

SWIVEL MALE CONNECTORS: BSPP & METRIC PORT THREADS
Swivel Male Connector Swivel Male Connector

BSPP Thread with Seal Metric Thread with Seal
Working
Tube BSPP
Series Pressure Part Number Metric Thread Part Number
Size (mm) Thread
(bar)
L 6 400 1/8" * EGE-LRed-061/8 M10x1* EGE-LMed-06

L 8 400 1/4" * EGE-LRed-081/4 M12x1.5* EGE-LMed-08
L 10 400 3/8" EGE-LRed-103/8
L 12 400 1/4" EGE-LRed-121/4
L 12 400 1/2" EGE-LRed-121/2 M18x1.5 EGE-LMed-12
L 15 400 3/8" EGE-LRed-153/8
L 18 315 3/4" EGE-LRed-183/4
L 22 315 3/4" * EGE-LRed-22 3/4 M26x1.5* EGE-LMed-22
L 22 315 1" EGE-LRed-22/1
L 28 250 1" * EGE-LRed-28/1 M33x2* EGE-LMed-28
L 35 250 1-1/4" * EGE-LRed-35 11/4 M42x2* EGE-LMed-35
L 35 250 1-1/2" EGE-LRed-35 11/2
L 42 250 1-1/4" EGE-LRed-42 11/4
L 42 250 1-1/2" * EGE-LRed-42 11/2 M48x2* EGE-LMed-42
S 6 630 1/4" * EGE-SRed-06 1/4 M12x1.5* EGE-SMed-06
S 8 630 3/8" EGE-SRed-08 3/8
S 10 630 1/4" EGE-SRed-10 1/4 M16x1.5* EGE-SMed-10
S 10 630 3/8" * EGE-SRed-10 3/8
S 12 630 1/4" EGE-SRed-12 1/4
S 12 630 1/2" EGE-SRed-12 1/2
S 16 400 3/4" EGE-SRed-16 3/4
S 20 400 3/4" * EGE-SRed-20 3/4 M27x2* EGE-SMed-20
S 25 400 1" * EGE-SRed-25/1 M33x2* EGE-SMed-25
S 30 400 1-1/4" * EGE-SRed-30 11/4 M42x2* EGE-SMed-30
S 38 315 1-1/4" EGE-SRed-38 11/4
S 38 315 1-1/2" * EGE-SRed-38 11/2 M48x2* EGE-SMed-38
* Indicates the standard port thread size for this fitting.
All fittings in the EGE series use a DKO type swivel female with wire retained nut and O-ring seal.

SWIVEL MALE CONNECTORS: NPT PORT THREAD
Swivel Male Connector Swivel Connector

NPT Thread Body NPT Thread
Tube Working
NPT
Thread
(mm) (bar)
L 6 315 1/8" * EVGE-L-06 1/8 EVGE-L/S-06 1/8X

L 6 315 1/4" EVGE-L-06 1/4 EVGE-L/S-06 1/4X
L 8 315 1/4" * EVGE-L-08 1/4 EVGE-L/S-08 1/4X
L 10 315 1/4" * EVGE-L-10 1/4 EVGE-L/S-10 1/4X
L 10 315 3/8" EVGE-L-10 3/8 EVGE-L/S-10 3/8X
L 12 315 1/4" EVGE-L-12 1/4 EVGE-L/S-12 1/4X
L 12 315 3/8" * EVGE-L-12 3/8 EVGE-L/S-12 3/8X
L 12 315 1/2" EVGE-L-12 1/2 EVGE-L/S-12 1/2X
L 15 315 1/2" * EVGE-L-15 1/2 EVGE-L-15 1/2X
L 18 315 1/2" * EVGE-L-18 1/2 EVGE-L-18 1/2X
L 22 160 3/4" * EVGE-L-22 3/4 EVGE-L-22 3/4X
L 28 160 1" * EVGE-L-28/1 EVGE-L-28X
L 35 160 1-1/4" * EVGE-L-35 11/4 EVGE-L-35X
L 42 160 1-1/2" * EVGE-L-42 11/2 EVGE-L-42X
S 6 630 1/8" EVGE-S-06 1/8 EVGE-L/S-06 1/8X
S 6 630 1/4" * EVGE-S-06 1/4 EVGE-L/S-06 1/4X
S 8 630 1/4" * EVGE-S-08 1/4 EVGE-L/S-08 1/4X
S 10 630 1/4" EVGE-S-10 1/4 EVGE-L/S-10 1/4X
S 10 630 3/8" * EVGE-S-10 3/8 EVGE-L/S-10 3/8X
S 12 630 1/4" EVGE-S-12 1/4 EVGE-L/S-12 1/4X
S 12 630 3/8" * EVGE-S-12 3/8 EVGE-L/S-12 3/8S
S 12 630 1/2" EVGE-S-12 1/2 EVGE-L/S-12 1/2X
S 14 630 1/2" * EVGE-S-14 1/2 EVGE-S-14 1/2X
S 16 400 1/2" * EVGE-S-16 1/2 EVGE-S-16 1/2X
S 20 400 3/4" * EVGE-S-20 3/4 EVGE-S-20X
S 25 400 1" * EVGE-S-25/1 EVGE-S-25X
S 30 400 1-1/4" * EVGE-S-30 11/4 EVGE-S-30X
S 38 315 1-1/2" * EVGE-S-38 11/2 EVGE-S-38X
*Indicates the standard port thread for a given tube size.
All fittings in the EVGE series use a swivel female nut and ferrule on standpipe.

SAE FLANGE CONNECTOR: WELD STYLE
SAE Flange
Buttweld Connector
Tube
Flange Working
Size (mm) Part Number
Size Pressure (bar)
CODE 61 FLANGE SERIES
15 1/2" 200 GAFS32-15

16 1/2" 220 GAFS32-16
18 3/4" 130 GAFS33-18
22 3/4" 140 GAFS33-22
20 3/4" 220 GAFS33-20
25 3/4" 220 GAFS33-25
28 1" 115 GAFS34-28
30 1" 220 GAFS34-30
35 1 1/4" 90 GAFS35-35
25 1 1/4" 175 GAFS35-25
30 1 1/4" 175 GAFS35-30
38 1 1/4" 175 GAFS35-38
42 1 1/2" 115 GAFS36-42
38 1 1/2" 130 GAFS36-38
16 1/2" 260 GAFS62-16

25 3/4" 260 GAFS63-25
25 1" 260 GAFS64-25
30 1" 200 GAFS64-30
30 1 1/4" 200 GAFS65-30
38 1 1/4" 200 GAFS65-38
38 1 1/2" 200 GAFS66-38
GAFS bodies are low carbon steel, supplied in oiled finish suitable for welding.

SAE FLANGE CONNECTORS
SAE Flange SAE Flange

Connectors Straight Connectors 90E
Working
Tube Size Flange
Pressure Part Number Part Number
& Series Size
(bar)
15-L 1/2" 200 GFS32-L-15 WFS32-L-15

18-L 3/4" 200 GFS33-L-18 WFS33-L-18
22-L 3/4" 100 GFS33-L-22 WFS33-L-22
28-L 1" 100 GFS34-L-28 WFS34-L-28
35-L 1 1/4" 100 GFS35-L-35 WFS35-L-35
42-L 1 1/2" 100 GFS36-L-42 WFS36-L-42
16-S 1/2" 220 GFS32-S-16 WFS32-S-16
20-S 3/4" 220 GFS33-S-20 WFS33-S-20
25-S 3/4" 220 GFS33-S-25 WFS33-S-25
30-S 1" 220 GFS34-S-30 WFS34-S-30
25-S 1 1/4" 175 GFS35-S-25 WFS35-S-25
30-S 1 1/4" 175 GFS35-S-30 WFS35-S-30
38-S 1 1/4" 175 GFS35-S-38 WFS35-S-38
38-S 1 1/2" 130 GFS36-S-38 WFS36-S-38
16-S 1/2" 250 GFS62-S-16 WFS62-S-16

16-S 3/4" 250 GFS63-S-16 WFS63-S-16
20-S 3/4" 250 GFS63-S-20 WFS63-S-20
25-S 3/4" 250 GFS63-S-25 WFS63-S-25
25-S 1" 250 GFS64-S-25 WFS64-S-25
30-S 1" 250 GFS64-S-30 WFS64-S-30
30-S 1 1/4" 250 GFS65-S-30 WFS65-S-30
38-S 1 1/4" 200 GFS65-S-38 WFS65-S-38
38-S 1 1/2" 200 GFS66-S-38 WFS66-S-38
Size combinations for GFS fittings not shown here can be custom manufactured.

DIN FLANGE CONNECTORS
DIN Flange DIN Flange

Connectors Straight Connectors 90E
Working
Tube Size Flange
Pressure Part Number Part Number
& Series Size
(bar)
10-L 35 200 GFD35-L-10 WFD35-L-10

12-L 35 200 GFD35-L-12 WFD35-L-12
15-L 35 155 GFD35-L-15 WFD35-L-15
15-L 40 65 GFD40-L-15 WFD40-L-15
18-L 40 65 GFD40-L-18 WFD40-L-18
22-L 40 65 GFD40-L-22 WFD40-L-22
28-L 40 65 GFD40-L-28 WFD40-L-28
35-L 40 65 WFD40-L-35
35-L 55 65 WFD55-L-35
42-L 55 65 WFD55-L-42
16-S 35 200 GFD35-S-16 WFD35-S-16
20-S 35 WFD35-S-20
20-S 40 155 WFD40-S-20
20-S 55 155 WFD55-S-20
25-S 55 155 WFD55-S-25
30-S 55 155 WFD55-S-30

FEMALE CONNECTORS: BSPP & METRIC THREADS
Female Connector Female Connector

BSPP Thread Metric Thread

(mm) (bar) BSPP METRIC
L 6 400 1/8" GAI-LR-06 M10x1 GAI-LM-06

L 6 400 1/4" GAI-LR-06 1/4 M22x1.5 GAI-LM-06 M22x1.5
L 6 400 3/8" GAI-LR-06 3/8
L 8 400 1/8" GAI-LR-08 1/8
L 8 400 1/4" GAI-LR-08 M12x1.5 GAI-LM-08
L 8 400 1/2" GAI-LR-08 1/2
L 10 400 1/4" GAI-LR-10 M14x1.5 GAI-LM-10
L 10 400 1/2" GAI-LR-10 1/2
L 12 400 1/4" GAI-LR-12 1/4
L 12 400 3/8" GAI-LR-12 M16x1.5 GAI-LM-12
L 15 400 1/2" GAI-LR-15 M18x1.5 GAI-LM-15
L 15 400 3/4" GAI-LR-15 3/4
L 18 315 3/8" GAI-LR-18 3/8
L 18 315 1/2" GAI-LR-18 M22x1.5 GAI-LM-18
L 22 315 3/4" GAI-LR-22 M26x1.5 GAI-LM-22
L 28 250 1" GAI-LR-28 M33x2 GAI-LM-28
L 35 250 1-1/4" GAI-LR-35 M42x2 GAI-LM-35
L 42 250 1-1/2" GAI-LR-42 M48x2 GAI-LM-42
S 6 630 1/4" GAI-SR-06 M12x1.5 GAI-SM-06
S 8 630 1/4" GAI-SR-08 M14x1.5 GAI-SM-08
S 8 630 3/8" GAI-SR-08 3/8
S 10 630 3/8" GAI-SR-10 M16 x 1.5 GAI-SM-10
S 12 630 3/8" GAI-SR-12 M18 x 1.5 GAI-SM-12 M16X1.5
S 12 630 1/2" GAI-SR-12 1/2
S 14 630 3/8" GAI-SR-14 3/8
S 14 630 1/2" GAI-SR-14 M20 x 1.5 GAI-SM-14
S 16 400 3/8" GAI-SR-16 3/8
S 16 400 1/2" GAI-SR-16 M22 x 1.5 GAI-SM-16
S 20 400 3/4" GAI-SR-20 M27 x 2 GAI-SM-20
S 25 400 1" GAI-SR-25 M33 x 2 GAI-SM-25
S 30 400 1-1/4" GAI-SR-30 M42 x 2 GAI-SM-30
S 38 315 1-1/2" GAI-SR-38 M48 x 2 GAI-SM-38

GAUGE CONNECTORS: BSPP THREADS
Gauge Connector Gauge Connector

Compression Style Swivel Style
BSPP Thread BSPP Thread
Tube Working
BSPP Part Number Part Number
Series Size Pressure
Thread
(mm) (bar)
L 6 400 1/4" BSPP MAV-LR-06 MAV-LRev-06

L 6 400 3/8" BSPP MAV-LR-06 3/8
L 6 400 1/2" BSPP MAV-LR-06 1/2
L 12 400 1/2" BSPP MAV-LR-12 1/2
L 12 400 3/4" BSPP MAV-LR-12 3/4
L 15 400 1/4" BSPP MAV-LR-15
S 6 630 3/8" BSPP MAV-SR-06 3/8
S 6 630 1/2" BSPP MAV-SR-06 MAV-SRev-06
S 8 630 1/4" BSPP MAV-SR-08 1/4
S 8 630 3/8" BSPP MAV-SR-08 3/8
S 10 630 3/8" BSPP MAV-SR-10 3/8
S 12 630 3/8" BSPP MAV-SR-12 3/8

MALE x FEMALE SWIVEL UNIONS
Swivel Elbow Swivel Elbow 45E

Tube Working
Part Number
Series Size Pressure Part Number
(mm) (bar)
L 6 400 EW-L-06 EW45-L-06

L 8 400 EW-L-08 EW45-L-08
L 10 400 EW-L-10 EW45-L-10
L 12 400 EW-L-12 EW45-L-12
L 15 400 EW-L-15 EW45-L-15
L 18 315 EW-L-18 EW45-L-18
L 22 315 EW-L-22 EW45-L-22
L 28 250 EW-L-28 EW45-L-28
L 35 250 EW-L-35 EW45-L-35
L 42 250 EW-L-42 EW45-L-42
S 6 630 EW-S-06 EW45-S-06
S 8 630 EW-S-08 EW45-S-08
S 10 630 EW-S-10 EW45-S-10
S 12 630 EW-S-12 EW45-S-12
S 14 630 EW-S-14 EW45-S-14
S 16 400 EW-S-16 EW45-S-16
S 20 400 EW-S-20 EW45-S-20
S 25 400 EW-S-25 EW45-S-25
S 30 400 EW-S-30 EW45-S-30
S 38 315 EW-S-38 EW45-S-38
All fittings in the EW, EL and ET series use a DKO type swivel female with wire retained nut
and O-ring seal.

MALE x FEMALE SWIVEL UNIONS
Swivel Run Tee Swivel Branch Tee

Working
Tube
Series Pressure Part Number Part Number
Size (mm)
(bar)
L 6 400 EL-L-06 ET-L-06

L 8 400 EL-L-08 ET-L-08
L 10 400 EL-L-10 ET-L-10
L 12 400 EL-L-12 ET-L-12
L 15 400 EL-L-15 ET-L-15
L 18 315 EL-L-18 ET-L-18
L 22 315 EL-L-22 ET-L-22
L 28 250 EL-L-28 ET-L-28
L 35 250 EL-L-35 ET-L-35
L 42 250 EL-L-42 ET-L-42
S 6 630 EL-S-06 ET-S-06
S 8 630 EL-S-08 ET-S-08
S 10 630 EL-S-10 ET-S-10
S 12 630 EL-S-12 ET-S-12
S 14 630 EL-S-14 ET-S-14
S 16 400 EL-S-16 ET-S-16
S 20 400 EL-S-20 ET-S-20
S 25 400 EL-S-25 ET-S-25
S 30 400 EL-S-30 ET-S-30
S 38 315 EL-S-38 ET-S-38
All fittings in the EW, EL and ET- series use a DKO type swivel female with wire retained nut and O-ring seal.

SWIVEL x COMPRESSION TUBE REDUCERS
Tube Reducer Tube Reducer
Swivel Tube Tube Size Swivel Tube Tube Size

Part Number Part Number
Size (1) (2) Size (1) (2)
8L 6L RED-L-08/06 28L 10L RED-L-28/10

10L 6L RED-L-10/06 28L 12L RED-L-28/12
10L 8L RED-L-10/08 28L 15L RED-L-28/15
12L 6L RED-L-12/06 28L 18L RED-L-28/18
12L 8L RED-L-12/08 28L 22L RED-L-28/22
12L 10L RED-L-12/10 35L 6L RED-L-35/06
15L 6L RED-L-15/06 35L 8L RED-L-35/08
15L 8L RED-L-15/08 35L 10L RED-L-35/10
15L 10L RED-L-15/10 35L 12L RED-L-35/12
15L 12L RED-L-15/12 35L 15L RED-L-35/15
18L 6L RED-L-18/06 35L 18L RED-L-35/18
18L 8L RED-L-18/08 35L 22L RED-L-35/22
18L 10L RED-L-18/10 35L 28L RED-L-35/28
18L 12L RED-L-18/12 42L 6L RED-L-42/06
18L 15L RED-L-18/15 42L 8L RED-L-42/08
22L 6L RED-L-22/06 42L 10L RED-L-42/10
22L 8L RED-L-22/08 42L 12L RED-L-42/12
22L 10L RED-L-22/10 42L 15L RED-L-42/15
22L 12L RED-L-22/12 42L 18L RED-L-42/18
22L 15L RED-L-22/15 42L 22L RED-L-42/22
22L 18L RED-L-22/18 42L 28L RED-L-42/28
28L 6L RED-L-28/06 42L 35L RED-L-42/35
28L 8L RED-L-28/08
All fittings in the RED- series use a DKO type swivel female with wire retained nut and O-ring seal.
The pressure rating for the RED- fittings are the same as the pressure rating for the larger size on the fitting.
Contact us for the correct pressure rating of these fittings.

SWIVEL x COMPRESSION TUBE REDUCERS
Tube Reducer Tube Reducer
Swivel Tube Tube Swivel Tube Tube

Size (1) Size (2) Size (1) Size (2)
8S 6S RED-S-08/06 25S 10S RED-S-25/10

10S 6S RED-S-10/06 25S 12S RED-S-25/12
10S 8S RED-S-10/08 25S 14S RED-S-25/14
12S 6S RED-S-12/06 25S 16S RED-S-25/16
12S 8S RED-S-12/08 25S 20S RED-S-25/20
12S 10S RED-S-12/10 30S 6S RED-S-30/06
14S 6S RED-S-14/06 30S 8S RED-S-30/08
14S 8S RED-S-14/08 30S 10S RED-S-30/10
14S 10S RED-S-14/10 30S 12S RED-S-30/12
14S 12S RED-S-14/12 30S 14S RED-S-30/14
16S 6S RED-S-16/06 30S 16S RED-S-30/16
16S 8S RED-S-16/08 30S 20S RED-S-30/20
16S 10S RED-S-16/10 30S 25S RED-S-30/25
16S 12S RED-S-16/12 38S 6S RED-S-38/06
16S 14S RED-S-16/14 38S 8S RED-S-38/08
20S 6S RED-S-20/06 38S 10S RED-S-38/10
20S 8S RED-S-20/08 38S 12S RED-S-38/12
20S 10S RED-S-20/10 38S 14S RED-S-38/14
20S 12S RED-S-20/12 38S 16S RED-S-38/16
20S 14S RED-S-20/14 38S 20S RED-S-38/20
20S 16S RED-S-20/16 38S 25S RED-S-38/25
25S 6S RED-S-25/06 38S 30S RED-S-38/30
25S 8S RED-S-25/08
All fittings in the RED- series use a DKO type swivel female with wire retained nut and O-ring seal.
The pressure ratings for the RED- fittings are the same as the pressure rating for the larger size on the fitting.
Contact us for the exact pressure rating of these fittings.

SWIVEL UNIONS
Swivel Union Swivel Union 45E
Tube Working
Series Part Number Part Number
Size (mm) Pressure (bar)
L 6 400 GZ-L-06 GZ45-L-06

L 8 400 GZ-L-08 GZ45-L-08
L 10 400 GZ-L-10 GZ45-L-10
L 12 400 GZ-L-12 GZ45-L-12
L 15 400 GZ-L-15 GZ45-L-15
L 18 315 GZ-L-18 GZ45-L-18
L 22 315 GZ-L-22 GZ45-L-22
L 28 250 GZ-L-28 GZ45-L-28
L 35 250 GZ-L-35 GZ45-L-35
L 42 250 GZ-L-42 GZ45-L-42
S 6 630 GZ-S-06 GZ45-S-06
S 8 630 GZ-S-08 GZ45-S-08
S 10 630 GZ-S-10 GZ45-S-10
S 12 630 GZ-S-12 GZ45-S-12
S 14 630 GZ-S-14 GZ45-S-14
S 16 400 GZ-S-16 GZ45-S-16
S 20 400 GZ-S-20 GZ45-S-20
S 25 400 GZ-S-25 GZ45-S-25
S 30 400 GZ-S-30 GZ45-S-30
S 38 315 GZ-S-38 GZ45-S-38
All fittings in the GZ- series use a DKO type swivel female with wire retained nut and O-ring seal at both ends.

REDUCING SWIVEL UNIONS
Reducing Swivel Union Reducing Swivel Union
Tube Size Tube Size Tube Size Tube Size

1 2 1 2
8-L 6-L GZR-L-08/06 8-S 6-S GZR-S-06/06

10-L 6-L GZR-L-10/06 10-S 6-S GZR-S-10/06
10-L 8-L GZR-L-10/08 10-S 8-S GZR-S-10/08
12-L 6-L GZR-L-12/06 12-S 6-S GZR-S-12/06
12-L 8-L GZR-L-12/08 12-S 8-S GZR-S-12/08
12-L 10-L GZR-L-12/10 12-S 10-S GZR-S-12/10
15-L 10-L GZR-L-15/10 16-S 10-S GZR-S-16/10
15-L 12-L GZR-L-15/12 16-S 12-S GZR-S-16/12
18-L 12-L GZR-L-18/12 16-S 14-S GZR-S-16/14
18-L 15-L GZR-L-18/15 20-S 16-S GZR-S-20/16
22-L 12-L GZR-L-22/12 25-S 16-S GZR-S-25/16
22-L 15-L GZR-L-22/15 25-S 20-S GZR-S-25/20
22-L 18-L GZR-L-22/18 30-S 20-S GZR-S-30/20
28-L 18-L GZR-L-28/18 30-S 25-S GZR-S-30/25
28-L 22-L GZR-L-28/22 38-S 30-S GZR-S-38/30
35-L 28-L GZR-L-35/28
42-L 35-L GZR-L-42/35
Additonal sizes may be available.

IN-LINE CHECK VALVE
In-Line Check Valve
Working Pressure
Series Tube Size (mm) Part Number
(bar)
L 6 400 RHD-L-06
L 8 400 RHD-L-08
L 10 400 RHD-L-10
L 12 400 RHD-L-12
L 15 400 RHD-L-15
L 18 315 RHD-L-18
L 22 315 RHD-L-22
L 28 250 RHD-L-28
L 35 250 RHD-L-35
L 42 250 RHD-L-42
S 6 630 RHD-S-06
S 8 630 RHD-S-08
S 10 630 RHD-S-10
S 12 630 RHD-S-12
S 14 630 RHD-S-14
S 16 400 RHD-S-16
S 20 400 RHD-S-20
S 25 400 RHD-S-25
S 30 400 RHD-S-30
S 38 315 RHD-S-38
All RHD- check valves have a standard opening pressure of 1 bar.
Other opening pressures are available on request.

MALE CHECK VALVE CONNECTORS: BSPP THREAD
Check Valve Check Valve

Flow Port to Tube Flow Tube to Port
Tube Working
BSPP
Thread
(mm) (bar)
L 6 250 1/8" RHV-LRed-06 RHZ-LRed-06

L 28 100 1" RHV-LRed-28 RHZ-LRed-28
L 35 100 1 1/4" RHV-LRed-35 RHZ-LRed-35
L 42 100 1 1/2" RHV-LRed-42 RHZ-LRed-42
S 6 400 1/4" RHV-SRed-06 RHZ-SRed-06
S 25 250 1" RHV-SRed-25 RHZ-SRed-25
S 30 250 1 1/4" RHV-SRed-30 RHZ-SRed-30
S 38 250 1 1/2" RHV-SRed-38 RHZ-SRed-38
All RHV- and RHZ- check valves have a standard opening pressure of 1 bar.

MALE CHECK VALVE CONNECTORS: METRIC THREADS
Check Valve Check Valve

Flow Port to Tube Flow Tube to Port
Tube Working
Metric
Thread
(mm) (bar)
L 6 250 M10x1 RHV-LMed-06 RHZ-LMed-06

L 8 250 M12x1.5 RHV-LMed-08 RHZ-LMed-08
L 42 100 M 48x2 RHV-LMed-42 RHZ-LMed-42
S 6 400 M12x1.5 RHV-SMed-06 RHZ-SMed-06
S 20 400 M27x2 RHV-SMed-20 RHZ-SMed-20
S 38 250 M 48x2 RHV-SMed-38 RHZ-SMed-38
All RHV- and RHZ- check valves have a standard opening pressure of 1 bar.

FLARE CONNECTION ADAPTERS
Complete Adapter Flare Nut
Tube Size Working

(mm) Pressure (bar)
L 6 400 AB-L-06 BMO-L-06

L 8 400 AB-L-08 BMO-L-08
L 10 400 AB-L-10 BMO-L-10
L 12 400 AB-L-12 BMO-L-12
L 15 400 AB-L-15 BMO-L-15
L 18 315 AB-L-18 BMO-L-18
L 22 315 AB-L-22 BMO-L-22
L 28 250 AB-L-28 BMO-L-28
L 35 250 AB-L-35 BMO-L-35
L 42 250 AB-L-42 BMO-L-42
S 6 630 AB-S-06 BMO-S-06
S 8 630 AB-S-08 BMO-S-08
S 10 630 AB-S-10 BMO-S-10
S 12 630 AB-S-12 BMO-S-12
S 14 630 AB-S-14 BMO-S-14
S 16 400 AB-S-16 BMO-S-16
S 20 400 AB-S-20 BMO-S-20
S 25 400 AB-S-25 BMO-S-25
S 30 400 AB-S-30 BMO-S-30
S 38 315 AB-S-38 BMO-S-38
These adapters are used to replace the nut and ferrule on the metric tube fittings.
They allow for the installation of tubing that has been flared to 37E.
The nut sizes and tube sizes are not the same as SAE 37E flare (JIC).
Please contact us for the applicable flare dimensions and length allowances when using the
AB- flare adapters.

FLARE CONNECTION ADAPTERS
Flare Support Ring Flare Adapter
Tube Working
Size (mm) Pressure (bar)
L 6 400 SRO-L/S-06 BAO-L/S-06

L 8 400 SRO-L/S-08 BAO-L/S-08
L 10 400 SRO-L/S-10 BAO-L/S-10
L 12 400 SRO-L/S-12 BAO-L/S-12
L 15 400 SRO-L-15 BAO-L-15
L 18 315 SRO-L-18 BAO-L-18
L 22 315 SRO-L-22 BAO-L-22
L 28 250 SRO-L-28 BAO-L-28
L 35 250 SRO-L-35 BAO-L-35
L 42 250 SRO-L-42 BAO-L-42
S 6 630 SRO-L/S-06 BAO-L/S-06
S 8 630 SRO-L/S-08 BAO-L/S-08
S 10 630 SRO-L/S-10 BAO-L/S-10
S 12 630 SRO-L/S-12 BAO-L/S-12
S 14 630 SRO-S-14 BAO-S-14
S 16 400 SRO-S-16 BAO-S-16
S 20 400 SRO-S-20 BAO-S-20
S 25 400 SRO-S-25 BAO-S-25
S 30 400 SRO-S-30 BAO-S-30
S 38 315 SRO-S-38 BAO-S-38
These adapters are used to replace the nut and ferrule on the metric tube fittings.
They allow for the installation of tubing that has been flared to 37E.
The nut sizes and tube sizes are not the same as SAE 37E flare (JIC).
Please contact us for the applicable flare dimensions and length allowances when using the AB- flare adapters.

WELD COUPLERS
Weld Coupler Weld Coupler 90E
Working Weld Boss

Tube
Series Pressure Dimension for Part Number Part Number
Size (mm)
(bar) AS-style (mm)
L 6 400 10 AS-L-06 WAS-L-06

L 8 400 12 AS-L-08 WAS-L-08
L 10 400 14 AS-L-10 WAS-L-10
L 12 400 16 AS-L-12 WAS-L-12
L 15 400 19 AS-L-15 WAS-L-15
L 18 315 22 AS-L-18 WAS-L-18
L 22 315 27 AS-L-22 WAS-L-22
L 28 250 32 AS-L-28 WAS-L-28
L 35 250 40 AS-L-35 WAS-L-35
L 42 250 46 AS-L-42 WAS-L-42
S 6 630 11 AS-S-06 WAS-S-06
S 8 630 13 AS-S-08 WAS-S-08
S 10 630 15 AS-S-10 WAS-S-10
S 12 630 17 AS-S-12 WAS-S-12
S 14 630 19 AS-S-14 WAS-S-14
S 16 400 21 AS-S-16 WAS-S-16
S 20 400 26 AS-S-20 WAS-S-20
S 25 400 31 AS-S-25 WAS-S-25
S 30 400 36 AS-S-30 WAS-S-30
S 38 315 44 AS-S-38 WAS-S-38
The AS- series fittings are designed to be welded to tanks or larger pipes etc. and terminate in a compression tube
end.
The boss is larger than the tube size - they are not intended to be tube to tube unions.
The bodies are low carbon steel suitable for welding.

WELD NIPPLE: L SERIES
Weld Nipple
Tube Working Pressure Wall

Series Part Number
Size (mm) (bar) Thickness (mm)
L 15 201 1.5 SKO-L-15x1.5

L 15 259 2 SKO-L-15x2
L 15 365 2.5 SKO-L-15x2.5
L 18 164 1.5 SKO-L-18x1.5
L 18 226 2 SKO-L-18x2
L 18 293 2.5 SKO-L-18x2.5
L 22 181 2 SKO-L-22x2
L 22 232 2.5 SKO-L-22x2.5
L 28 139 2 SKO-L-28x2
L 28 177 2.5 SKO-L-28x2.5
L 28 217 3 SKO-L-28x3
L 35 109 2 SKO-L-35x2
L 35 169 3 SKO-L-35x3
L 35 303 5 SKO-L-35X5
L 42 139 3 SKO-L-42x3
The SKO- series weld nipples are designed to replace the ferrule, when the connections must be welded.
They are low carbon steel suitable for welding.
These nipples are available in various wall thicknesses to match the tube size.

WELD NIPPLE: S SERIES
Weld Straight Nipple
Tube Working Pressure Wall

Series Part Number
Size (mm) (bar) Thickness (mm)
S 6 365 1 SKO-S-6x1
S 6 624 1.5 SKO-S-6x1.5
S 8 259 1 SKO-S-8x1
S 8 423 1.5 SKO-S-8x1.5
S 8 624 2 SKO-S-8x2
S 10 201 1 SKO-S-10x1
S 10 321 1.5 SKO-S-10x1.5
S 10 460 2 SKO-S-10x2
S 12 259 1.5 SKO-S-12x1.5
S 12 365 2 SKO-S-12x2
S 12 485 2.5 SKO-S-12x2.5
S 12 624 3 SKO-S-12x3
S 14 303 2 SKO-S-14x2
S 14 398 2.5 SKO-S-14x2.5
S 14 504 3 SKO-S-14x3
S 16 259 2 SKO-S-16x2
S 16 337 2.5 SKO-S-16x2.5
S 16 423 3 SKO-S-16x3
S 20 259 2.5 SKO-S-20x2.5
S 20 321 3 SKO-S-20x3
S 20 388 3.5 SKO-S-20x3.5
S 20 460 4 SKO-S-20x4
S 25 247 3 SKO-S-25x3
S 25 347 4 SKO-S-25x4
S 25 460 5 SKO-S-25x5
S 30 201 3 SKO-S-30x3
S 30 279 4 SKO-S-30x4
S 30 365 5 SKO-S-30x5
S 30 460 6 SKO-S-30x6
S 38 213 4 SKO-S-38x4
S 38 275 5 SKO-S-38x5
S 38 342 6 SKO-S-38x6
The SKO- series weld nipples are designed to replace the ferrule, when the connections must be welded.
They are low carbon steel suitable for welding.
These nipples are available in various wall thicknesses to match the tube size.

TUBE NUTS AND FERRULES
Tube Nut Ferrule
Tube Working Tube Wrench

Series Size Pressure Nut Size Part Number Part Number
(mm) (bar) Thread (mm)
LL 4 100 M8 x 1 10 M-LL-04 D-LL-04

LL 5 100 M10 x 1 12 M-LL-05 D-LL-05
LL 6 100 M10 x 1 12 M-LL-06 D-LL-06
LL 8 100 M12 x 1 14 M-LL-08 D-LL-08
LL 10 100 M14 x 1 17 M-LL-10 D-LL-10
LL 12 100 M16 x 1 19 M-LL-12 D-LL-12
L 6 400 M12 x 1.5 14 M-L-06 DC-L/S-06
L 8 400 M14 x 1.5 17 M-L-08 DC-L/S-08
L 10 400 M16 x 1.5 19 M-L-10 DC-L/S-10
L 12 400 M18 x 1.5 22 M-L-12 DC-L/S-12
L 15 400 M22 x 1.5 27 M-L-15 DC-L-15
L 18 315 M26 x 1.5 32 M-L-18 DC-L-18
L 22 315 M30 x 2 36 M-L-22 DC-L-22
L 28 250 M36 x 2 41 M-L-28 DC-L-28
L 35 250 M45 x 2 50 M-L-35 DC-L-35
L 42 250 M52 x 2 60 M-L-42 DC-L-42
S 6 630 M14 x 1.5 17 M-S-06 DC-L/S-06
S 8 630 M16 x 1.5 19 M-S-08 DC-L/S-08
S 10 630 M18 x 1.5 22 M-S-10 DC-L/S-10
S 12 630 M20 x 1.5 24 M-S-12 DC-L/S-12
S 14 630 M22 x 1.5 27 M-S-14 DC-S-14
S 16 400 M24 x 1.5 30 M-S-16 DC-S-16
S 20 400 M30 x 2 36 M-S-20 DC-S-20
S 25 400 M36 x 2 46 M-S-25 DC-S-25
S 30 400 M42 x 2 50 M-S-30 DC-S-30
S 38 315 M52 x 2 60 M-S-38 DC-S-38

BSPP MALE x FEMALE ADAPTERS
BSPP Male x Female BSPP Male x Female with Seal
BSPP BSPP
Male Thread Female Thread
1/8" 1/4" Ri 1/8 x 1/4 Ri 1/8ed x 1/4

1/8" 3/8" Ri 1/8 x 3/8 Ri 1/8ed x 3/8
1/4" 1/8" Ri 1/4 x 1/8 Ri 1/4ed x 1/8
1/4" 3/8" Ri 1/4 x 3/8 Ri 1/4ed x 3/8
1/4" 1/2" Ri 1/4 x 1/2 Ri 1/4ed x 1/2
1/4" 3/4" Ri 1/4 x 3/4 Ri 1/4ed x 3/4
3/8" 1/8" Ri 3/8 x 1/8 Ri 3/8ed x 1/8
3/8" 1/4" Ri 3/8 x 1/4 Ri 3/8ed x 1/4
3/8" 1/2" Ri 3/8 x 1/2 Ri 3/8ed x 1/2
3/8" 3/4" Ri 3/8 x 3/4 Ri 3/8ed x 3/4
1/2" 1/4" Ri 1/2 x 1/4 Ri 1/2ed x 1/4
1/2" 3/8" Ri 1/2 x 3/8 Ri 1/2ed x 3/8
1/2" 3/4" Ri 1/2 x 3/4 Ri 1/2ed x 3/4
1/2" 1" Ri 1/2 x 1 Ri 1/2ed x 1
1/2" 1 1/4" Ri 1/2 x 11/4 Ri 1/2ed x 11/4
3/4" 1/4" Ri 3/4 x 1/4 Ri 3/4ed x 1/4
3/4" 3/8" Ri 3/4 x 3/8 Ri 3/4ed x 1/2
3/4" 1/2" Ri 3/4 x 1/2 Ri 3/4ed x 1
3/4" 1" Ri 3/4 x 1 Ri 3/4ed x 11/4
3/4" 1 1/4" Ri 3/4 x 11/4 Ri 3/4ed x 11/2
3/4" 1 1/2" Ri 3/4 x 11/2 Ri3/4ed x 11/2
1" 1/4" Ri 1 x 1/4 Ri 1ed x 1/4
1" 3/8" Ri 1 x 3/8 Ri 1ed x 3/8
1" 1/2" Ri 1 x 1/2 Ri 1ed x 1/2
1" 3/4" Ri 1 x 3/4 Ri 1ed x 3/4
1" 1 1/4" Ri 1 x 11/4 Ri 1ed x 11/4
1" 1 1/2" Ri 1 x 11/2 Ri 1ed x 11/2
1 1/4" 1/2" Ri 1 1/4 x 1/2 Ri 1 1/4ed x 1/2
1 1/4" 3/4" Ri 1 1/4 x 3/4 Ri 1 1/4ed x 3/4
1 1/4" 1" Ri 11/4 x 1 Ri 1 1/4ed x 1
1 1/4" 1 1/2" Ri 11/4 x 11/2 Ri 1 1/4ed x 11/2
1 1/2" 1/2" Ri 11/2 x 1/2 Ri 1 1/2ed x 1/2
1 1/2" 3/4" Ri 11/2 x 3/4 Ri 1 1/2ed x 3/4
1 1/2" 1" Ri 11/2 x 1 Ri 1 1/2ed x 1
1 1/2" 1 1/4" Ri 11/2 x 11/4 Ri 1 1/2ed x 11/4

MISCELLANEOUS PARTS
Tube Reinforcing Sleeve Sleeve Nut
Tube Tube Tube Thread

O.D. (mm) I.D. (mm) Size (mm) Size
6 4 VSH 06x1 4 M8x1 S-LL-04

6 5 VSH 06x0.5 6 M10x1 S-LL-06
8 6 VSH 08x1 8 M12x1 S-LL-08
10 7 VSH 10x1.5
10 8 VSH 10x1 6 M12x1.5 S-L-06
12 9 VSH 12x1.5 8 M14x1.5 S-L-08
12 10 VSH 12x1 10 M16x1.5 S-L-10
15 12 VSH 15x1.5 12 M18x1.5 S-L-12
15 13 VSH 15x1
18 15 VSH 18x1.5
18 16 VSH 18x1
22 19 VSH 22x1.5
22 20 VSH 22x1
25 22 VSH 25x1
28 24 VSH 28x2
28 25 VSH 28x1.5
35 31 VSH 35x2
42 38 VSH 42x2

FITTING PLUGS
Fitting Plug Body Fitting Plug with Nut
Nut
Tube
Series Thread Part Number Part Number
Size (mm)
Size
L 6 M12 x 1.5 BUZ-L/S-06X BUZ-L-06

L 8 M14 x 1.5 BUZ-L/S-08X BUZ-L-08
L 10 M16 x 1.5 BUZ-L/S-10X BUZ-L-10
L 12 M18 x 1.5 BUZ-L/S-12X BUZ-L-12
L 15 M22 x 1.5 BUZ-L-15X BUZ-L-15
L 18 M26 x 1.5 BUZ-L-18X BUZ-L-18
L 22 M30 x 2 BUZ-L-22X BUZ-L-22
L 28 M36 x 2 BUZ-L-28X BUZ-L-28
L 35 M45 X 2 BUZ-L-35X BUZ-L-35
L 42 M52 X 2 BUZ-L-42X BUZ-L-42
S 6 M14 x 1.5 BUZ-L/S-06X BUZ-S-06
S 8 M16 x 1.5 BUZ-L/S-08X BUZ-S-08
S 10 M18 x 1.5 BUZ-L/S-10X BUZ-S-10
S 12 M20 x 1.5 BUZ-L/S-12X BUZ-S-12
S 14 M22 x 1.5 BUZ-S-14X BUZ-S-14
S 16 M24 x 1.5 BUZ-S-16X BUZ-S-16
S 20 M30 x 2 BUZ-S-20X BUZ-S-20
S 25 M36 x 2 BUZ-S-25X BUZ-S-25
S 30 M42 x 2 BUZ-S-30X BUZ-S-30
S 38 M52 x 2 BUZ-S-38X BUZ-S-38
BUZ- series plugs are used to plug a fitting body where no tubing is installed.

TUBE END CAPS
Tube End Cap
Series Tube Size (mm) Thread Size Part Number
LL 4 M8 x 1 V-LL-04
LL 5 M10 x 1 V-LL-05
LL 6 M10 x 1 V-LL-06
LL 8 M12 x 1 V-LL-08
LL 10 M14 x 1 V-LL-10
L 6 M12 x 1.5 V-L-06
L 8 M14 x 1.5 V-L-08
L 10 M16 x 1.5 V-L-10
L 12 M18 x 1.5 V-L-12
L 15 M22 x 1.5 V-L-15
L 18 M26 x 1.5 V-L-18
L 22 M30 x 2 V-L-22
L 28 M36 x 2 V-L-28
L 35 M45 X 2 V-L-35
L 42 M52 X 2 V-L-42
S 6 M14 x 1.5 V-S-06
S 8 M16 x 1.5 V-S-08
S 10 M18 x 1.5 V-S-10
S 12 M20 x 1.5 V-S-12
S 14 M22 x 1.5 V-S-14
S 16 M24 x 1.5 V-S-16
S 20 M30 x 2 V-S-20
S 25 M36 x 2 V-S-25
S 30 M42 x 2 V-S-30
S 38 M52 x 2 V-S-38
LS
V- series caps close a tube end after removal from a fitting, when used with a nut and ferrule.

PORT PLUG
BSPP Port Plug with Seal Metric Port Plug with Seal
Port Hex Key Size Port Hex Key Size

Thread (mm) Thread (mm)
1/8" 5 VSTIedR1/8 M8 x 1 VSTIed M08

1/4" 6 VSTIedR1/4 M10 x 1 5 VSTIed M10
3/8" 8 VSTIedR3/8 M12 x 1.5 6 VSTIed M12
1" 17 VSTIedR1 M18 x 1.5 8 VSTIed M18
1 1/4" 22 VSTIedR11/4 M20 x 1.5 10 VSTIed M20
1 1/2" 24 VSTIedR11/2 M22 x 1.5 10 VSTIed M22
M26 x 1.5 12 VSTIed M26
M27 x 2 12 VSTIed M27
ISO 6149 Metric Plug with O-ring
Port Thread Hex Key Size Part Number

(mm)
M10 x 1 5 VSTO M10

M12 x 1.5 6 VSTO M12
M14 x 1.5 6 VSTO M14
M16 x 1.5 8 VSTO M16
M18 x 1.5 8 VSTO M18
M20 x 1.5 10 VSTO M20
M22 x 1.5 10 VSTO M22
M26 x 1.5 12 VSTO M26
M27 x 2 12 VSTO M27
M 33 x 2 17 VSTO M33
M42 x 2 22 VSTO M42
M48 x 2 24 VSTO M48

THREAD SEALS: BSPP & METRIC
ED Rubber Seal DKA Metal Seal
Thread Size Part Number Part Number
M8 x 1 ED M08 DKA M08

M10 x 1 ED R1/8 DKA M10
M12 x 1.5 ED M12 DKA M12
M14 x 1.5 ED R1/4 DKA M14
M16 x 1.5 ED M16 DKA M16
M18 x 1.5 ED M18 DKA M18
M20 x 1.5 ED M20 DKA M20
M22 x 1.5 ED M22 DKA M22
M26 x 1.5 ED R3/4 DKA M26
M27 x 2 ED R3/4 DKA M27
M33 x 2 ED R1 DKA R1
M42 x 2 ED R11/4 DKA R11/4
M48 x 2 ED R11/2 DKA R11/2
1/8" BSPP ED R1/8 DKA R1/8
1" BSPP ED R1 DKA R1
1 1/4" BSPP ED R11/4 DKA R11/4
1 1/2" BSPP ED R11/2 DKA R11/2
ED seals are used on fittings such as GE-, VSTI-, Ri- and others where the bodies are machined
to accept this seal. Standard seal material is BUNA. Viton seals are available from stock.
Other materials also available.
DKA-, KDE-, and EDE- seals are used on banjo fittings DSVW, DSVT, WHO and WHT.
DKA and EDE seals can be used on ports with a standard sized spot face diameter.
KDE seals require a larger spot face diameter.

THREAD SEALS: BSPP & METRIC
Metal / Teflon Seal Metal / Rubber Seal
Thread
Size Part Number Part Number
M10 x 1 KDE M10 EDE R1/8

M12 x 1.5 KDE M12 EDE M12
M14 x 1.5 KDE M14 EDE R1/4
M20 x 1.5 KDE M20 EDE R1/2
M26 x 1.5 KDE M26 EDE R3/4
M27 x 2 KDE M27 EDE R3/4
M33 x 2 KDE R1 EDE R1
M42 x 2 KDE R11/4 EDE R11/4
M48 x 2 KDE R11/2 EDE R11/2
1/8" BSPP KDE R1/8 EDE R1/8
1" BSPP KDE R1 EDE R1
1 1/4" BSPP KDE R 11/4 EDE R11/4
1 1/2" BSPP KDE R11/2 EDE R11/2
DKA-, KDE-, and EDE- seals are used on banjo fittings DSVW, DSVT, WHO and WHT.
DKA and EDE seals can be used on ports with a standard sized spot face diameter.
KDE seals require a larger spot face diameter.

MISCELLANEOUS SEALS
O-ring for DKO Type Swivel O-ring for 37E Flare AB- Fitting
Tube Size Part Number Part Number
6-L/S OR 4x1.5 OR 4.4x0.8

8-L/S OR 6x1.5 OR 6x0.8
10-L/S OR 7.5x1.5 OR 7.5x0.8
12-L/S OR 9x1.5 OR 9.5x0.8
15-L OR 12x2 OR 12.5x0.8
18-L OR 15x2 OR 15x1
22-L OR 20x2 OR 18x1
28-L OR 26x2 OR 23x1
35-L OR 32x2.5 OR 30x1
42-L OR 38x2.5 OR 36.5x1
14-S OR 10x2 OR 11x1
16-S OR 12x2 OR 12.5x1
20-S OR 16.3x2.4 OR 16x1
25-S OR 20.3x2.4 OR 20x1
30-S OR 25.3x2.4 OR 25x1
38-S OR 33.3x2.4 OR 31.47x1.78
O-rings for DKO type swivels are used

on all female swivel tube fittings,
including AB-, EGE-, EL-, ESNO-, ET-,EW-,
GZ-, RED-and SKO. The standard
O-ring material is BUNA with
Viton and EPDM also available.
Seal for BSPP Gauge Connectors
O-rings for the AB- type fitting are
for the second O-ring which make the
Thread Size Part Number seal at the 37E flare connection. The
standard O-ring material is BUNA with
Viton and EPDM also available. The seals
1/8" BSP DKI R1/8
for the gauge connections fit inside the
1/4" BSP DKI R1/4 female thread and make the seal
3/8" BSP DKI R3/8 between the bottom of the machined hole
1/2" BSP DKI R1/2 and the gauge. The material is steel.
3/4" BSP DKI R3/4


Wfa - Metric - Tube Fittings

Uploaded by

Copyright:

Available Formats

Wfa - Metric - Tube Fittings

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wfa - Metric - Tube Fittings

Uploaded by

Copyright:

Available Formats

Metric Hydraulic Compression Tube Fittings

Williams Fluidair Corporation Limited

CARBON STEEL FITTINGS

STAINLESS STEEL FITTINGS (DIN 1.4571)

FITTING SERIES - LIGHT, MEDIUM, HEAVY

Williams Fluidair Corporation Limited

FUNCTION OF A FLARE COUPLING:The flare couplings guarantee a reliable connection between

Williams Fluidair Corporation Limited

Working Pressure (Bar)

LL Series L Series S Series

FITTING IDENTIFICATION FOR METRIC COMPRESSION TUBE FITTINGS

Williams Fluidair Corporation Limited

Williams Fluidair Corporation Limited

SAE O-ring Threads (O-ring boss)

Williams Fluidair Corporation Limited

GR- TR- SV- WSV-

Williams Fluidair Corporation Limited

WE- WE- WE- WE-

Williams Fluidair Corporation Limited

TE- TE- TE- TE-

TE- TEE- TEE- TEO-

DSVW- SWVE- WHO- DSVT-

SWIVEL MALE CONNECTORS

EGE- EVGE- EVGE-X

Williams Fluidair Corporation Limited

GAFS- Weld Style GFS- SAE Flange GFD- DIN Flange

Page 36 Page 37 Page 38

MAV- MAV-EV Swivel

EW- EW45- EL- ET-

RED- GZ- GZ45- GZR-

RHV- Check Valve RHZ- Check Valve

Williams Fluidair Corporation Limited

AB- BMO- SRO- BAO-

AS- WAS- SKO- SKO-

Williams Fluidair Corporation Limited

BUZ - Fitting Plug with Nut V- VSTI- VSTO-

ED- DKA- KDE- EDE-

OR- OR- DKI-

Williams Fluidair Corporation Limited

Straight Union Union Elbow

LL 4 100 G-LL-04 W-LL-04

Standard fittings are plated steel.

Williams Fluidair Corporation Limited

Union Tee Union Cross

LL 4 100 T-LL-04 K-LL-04

Standard fittings are plated steel.

Williams Fluidair Corporation Limited

Reducing Tube Union Reducing Tube Union

100 6-LL 4-LL GR-LL-06/04 630 8-S 6-S GR-S-06/06

Additional sizes may be available.

Williams Fluidair Corporation Limited

Reducing Union Tee Reducing Union Tee

Williams Fluidair Corporation Limited

Straight Bulkhead Union Elbow Bulkhead Union

LL 4 100 SV-LL-04 WSV-LL-04

Williams Fluidair Corporation Limited

Weld Bulkhead Weld Union

L 6 400 ESV-L-06 ESNO-L-06