Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Ecoray Hf-525 Plus / Sig-40-525

    Uploaded by

    Chung Tbyt Da Nang
    This document provides instructions for operating an X-ray system. It describes the power on/off switches, emergency stop switches, start-up procedure, and how to check the system status. It also explains the anatomical programming radiographic (APR) function, which allows selecting body size, exposure method, and body point for memorized exposure settings. The operator can adjust the kV, mA, and time as needed and save the new exposure data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ecoray Hf-525 Plus / Sig-40-525

    Uploaded by

    Chung Tbyt Da Nang
    17 views3 pages
    This document provides instructions for operating an X-ray system. It describes the power on/off switches, emergency stop switches, start-up procedure, and how to check the system status. It also explains the anatomical programming radiographic (APR) function, which allows selecting body size, exposure method, and body point for memorized exposure settings. The operator can adjust the kV, mA, and time as needed and save the new exposure data.

    Original Title

    123

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for operating an X-ray system. It describes the power on/off switches, emergency stop switches, start-up procedure, and how to check the system status. It also explains the anatomical programming radiographic (APR) function, which allows selecting body size, exposure method, and body point for memorized exposure settings. The operator can adjust the kV, mA, and time as needed and save the new exposure data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views3 pages

    Ecoray Hf-525 Plus / Sig-40-525

    Uploaded by

    Chung Tbyt Da Nang
    This document provides instructions for operating an X-ray system. It describes the power on/off switches, emergency stop switches, start-up procedure, and how to check the system status. It also explains the anatomical programming radiographic (APR) function, which allows selecting body size, exposure method, and body point for memorized exposure settings. The operator can adjust the kV, mA, and time as needed and save the new exposure data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    EcoRay HF-525 PLUS / SIG-40-525

    Power ON switch

    Electric power status lamp Power OFF switch

    Normal: Yellow

    2.2.4 EMERGENCY STOP


    1. EMERGENCY STOP
    (1) Safety devices for patient or operator to disconnect electric power when patient or operator are
    placed in the electrical or mechanical emergency situation.
    (2) Emergency stop switches are located at the top of the generator and top of the handle bar and if
    push this switch and then disconnect electric power, and turn it clockwise electric power will be
    supplied.

    EMERGENCY STOP EMERGENCY STOP

    2.2.5 Turn on the Power ON


    1. Introduction of Power ON
    (1) To operator the system, push the power ON switch of Console.
    (2) After power on, system will diagnosing automatically during 15 seconds.

    ● Push the power ON switch

    ● After power ON, Standby lamp lighting with yellow and green.

    In normal condition, green lamp lighting after 15 seconds later.

    ● After power on, system will diagnosing automatically during 15 seconds.

    ● Display progress at the mA window by 0 to 100.

    ● In the normal condition, 100 will be displayed at the mA window and could use

    X-ray system.

    ● In abnormal condition, error will be displayed at the mA window before 100 and

    then could not use X-ray system.

    (Rev. 2.1) 33 Operation Manual


    EcoRay HF-525 PLUS / SIG-40-525

    2. Procedure of Power ON
    (1) Push power ON switch of Console
    (2) Standby lamp lighting with yellow and green if system is normal green lamp will be lighting.
    (3) ”Set 0 r 1.00” will be displayed at the Console window and if system is normal condition,
    “Set 100 r 1.00” display after 15 seconds later.
    (4) “Set 100 r 1.00” displayed at the window, could use X-ray system.
    (5) If abnormal condition, Error code will be displayed at the Console window and then could not
    use X-ray system.

    2.2.6 Check System Condition


    1. In normal condition

    (1) After power ON, check system condition automatically.

    (2) After power ON, will be changed to the Radiography mode after
    15 seconds later.

    2. In abnormal condition

    (1) After power ON, check system condition automatically.

    (2) During system check condition, error code will be displayed


    when system troubled.

    (3) If error displayed, turn ON/OFF repeatedly, but error code not
    appeared, system must be checked by authorized engineer.

    2.2.7 How to Use


    1. APR (Anatomical Programming Radiographic) function
    (1) APR function will be activated automatically after power ON of console.
    (2) Memorized APR data is saved by manufacturer’s experience but operator could change APR data
    by need
    (3) APR could use without specific procedure.
    (4) APR is consists of 4 function switches.
    (See next page images)

    (Rev. 2.1) 34 Operation Manual


    EcoRay HF-525 PLUS / SIG-40-525

    1. Select Body size


    3. Select Body point

    2. Select Exposure method


    4. Memory switch

    (5) Select Body size

    Thin Body size Auxiliary

    Middle Body size Obese Body size

    (6) Select Exposure method

    A-P exposure method APR data memory switch

    Lateral exposure method Oblique exposure method

    (7) Select Body point


    ● Body point is consists of 21 anatomical mode and 3 types of exposure method.
    ● If push switch and then selected and lamp lighting.

    2. Adjust exposure condition


    (1) If change exposure data and memory it, old exposure data will be deleted and could not use it
    again.

    APR Function Adjust kV, mA, Time Memory

    Select APR point


    Memorized new data
    (Body size, Exposure method,
    Body point)

    (2) Adjust Exposure value and display


    ● kV adjustment: Increase →No. 1, Decrease → No. 2

    Fast adjustment → No. 1 + No. 2 or No. 3 + No. 2


    1 2 3

    ● mA adjustment: Increase → No. 1, Decrease → No. 2

    1 2
    ● mAs / Time select: If push No. 3 switch and then selected and selected switch will be
    lighting.
    ● mAs / Time adjustment: Increase → No. 1, Decrease → No. 2
    1 2 3

    (Rev. 2.1) 35 Operation Manual

    You might also like