m

Name: Hana Ayad Date: 03/01/22

Student Exploration: Stoichiometry

Directions: Follow the instructions to go through the simulation. Respond to the questions and
prompts in the orange boxes.
Vocabulary: Avogadro’s number, balanced equation, cancel, coefficient, conversion factor, dimensional
analysis, formula mass, molar mass, mole, molecular mass, stoichiometry
Prior Knowledge Questions (Do these BEFORE using the Gizmo.)
1. A 250 mL glass of orange juice contains 22 grams of sugar. How much sugar is in a two-liter (2,000 mL)

bottle of orange juice? 22/220 * 2000 = 200 g

2. It requires two sticks of butter to make a batch of 20 cookies. How much butter will it take to make 150

cookies? 2/20 * 250 = 25

Gizmo Warm-up
Just as a cook follows a recipe to decide how much of each
ingredient to add, a chemist uses stoichiometry to determine
the amounts of substances involved in chemical reactions. The
Stoichiometry Gizmo allows you to try your hand at figuring out
the amounts of reactants and products that take part in a
chemical reaction.
To begin, check that this equation is shown:

Fe2O3 + 3CO 🡪 2Fe + 3CO2

1. Look at the coefficients (such as the “3” in 3CO) in front of each substance in the equation. The
coefficients tell you how many molecules or atoms take part in a chemical reaction. In the spaces below,
list the number of each molecule or atom in the equation:

Fe2O3 1 CO 3 Fe 2 CO2 3

2. In a balanced equation, the same number of each kind of atom is shown on each side of the equation.
Calculate the number of iron (Fe), oxygen (O), and carbon atoms (C).

Reactants Iron: 2 Oxygen: 6 Carbon: 3

Products Iron: 2 Oxygen: 6 Carbon: 3

Based on these values, is the equation balanced? yes

Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
 Get the Gizmo ready:
Activity A: ● Check that the equation is still:

Moles Fe2O3 + 3CO 🡪 2Fe + 3CO2

● If not, click New equation until it reappears.

Introduction: A mole is:

A) A mammal known for digging up gardens.
B) A small, dark spot on the skin.
C) A spy embedded within an enemy government.
D) 6.02 × 1023 particles of a substance.
E) All of the above.
The correct answer, of course, is E. In chemistry, the mole (mol) is defined as an amount of a substance that
contains 6.022 × 1023 particles of that substance. This number, called Avogadro’s number, is special because
this number of particles has a mass in grams that is equal to the mass (in unified mass units) of a single
particle of the substance.

Question: How do scientists find the formula mass and molar mass of a substance?

1. 1. Calculate: The formula mass of a compound is the sum of the masses of each atom in the chemical
formula. The unit of formula mass is the unified mass unit (u). Formula mass is also called molecular
mass if the compound is composed of molecules.

Iron’s atomic mass is 55.85 u, carbon’s mass is 12.01 u, and oxygen’s mass is 16.00 u.

A. Calculate the formula mass of carbon monoxide (CO) by adding the atomic mass of carbon and
the atomic mass of oxygen: formula mass = 12.01 + 16
formula mass = 28.01 u

B. Calculate the formula mass of carbon dioxide (CO2): formula mass = 2(16) + 12.01
formula mass = 44.01 u
C. Calculate the formula mass of iron (III) oxide (Fe2O3): formula mass = 2(55.85) + 3(16)
formula mass = 159.7 u

2. Infer: A mole of a substance has a mass in grams that is equal to the formula mass. For example, a carbon
atom has an average mass of 12.01 u. A mole of carbon has a mass of 12.01 g. Based on their formula
masses, list the molar mass of each substance. The unit for molar mass is g/mol, or grams per mole.

Fe2O3 159.7 CO 28.01 Fe 55.85 amu CO2 44.01

amu amu amu

Check your answers on the Gizmo by inspecting the middle row of tiles on the right side of the Gizmo.
These tiles show the units “1 mol” on top and “g” below.

3. Practice: Hydrogen has an atomic mass of 1.01 u. What is the molar mass of these substances?
(Remember to use the units g/mol.)

H2O 2(1.01) + CH4 12.01 + H2CO3 2(1.01) C6H12O6 6(12.01)

Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
 16 4(1.01) + 12.01 +
= 18.02 = 16.05 + 3(16) 12(1.01)
amu amu = 62.01 + 6(16)
amu =
180.18
amu

Activity B: Get the Gizmo ready:

● Check that the equation is still:
Canceling
units Fe2O3 + 3CO 🡪 2Fe + 3CO2

Introduction: While solving problems in stoichiometry, it is useful to pay attention to the units of the answer.
The process of comparing units is called dimensional analysis. A common technique involves using
conversion factors to convert from one unit to another. Units that appear in the numerator and denominator
of a fraction can be canceled out. For example, converting 2 moles of carbon monoxide to grams involves
multiplying by a conversion factor:

2 mol CO • 28.01 g CO = 56.02 g CO

1 mol CO

All conversion factors are equivalent to one. For example, the conversion factor given above is equivalent to
one because the numerator (28.01 g CO) and denominator (1 mol CO) represent the same amount of CO. The
“mol CO” unit is canceled, leaving an answer unit of grams.

Question: How do we solve problems in stoichiometry?

1. Observe: The first question is: “How many moles of carbon monoxide (CO) are required to react completely
with 1.75 moles of iron (III) oxide (Fe2O3)?” (If this is not the question you see, click New question until it
appears.)

A. What unit is given in the question? moles of iron (III) oxide

B. What quantity is asked for? moles of carbon monoxide

2. Find: Look for the conversion factor that contains the units “mol Fe2O3” on top and “mol CO” on the bottom.
Drag the tile containing this factor down to the green strip at the bottom.

According to the tile, how many moles of CO react with one mole of Fe2O3? 3 moles

3. Analyze: To get an answer in moles of CO, you need to cancel the moles of Fe2O3. Turn on Show units.
A. What units are given to the right of the equals sign? (mol Fe2O3) * (mol
Fe2O3)/mol CO

B. If these aren’t the units you want, click Flip tile. What unit is given now?

mol CO

4. Calculate: If the units are correct, multiply or divide the numbers to solve the problem.

Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
 A. How many moles of CO will react with 1.75 moles of Fe2O3? 5.25 mol CO
B. Turn on Show numerical result. Were you correct? yes

5. Practice: Turn off Show units and Show numerical result. Click New question, and use what you’ve
learned to solve another stoichiometry problem. For each problem, list the units given, the units asked for,
and the solution.
The problems in the Gizmo are given in random order, so you may have to click Next question several
times to see a new problem. (Note: Each term in the equation is either a solid (s), liquid (l), gas (g), or an
aqueous solution (aq).)
If you are stuck, try one of the following hints:
● If the given unit is grams (or liters or particles), convert from that unit to moles first. Then convert to
moles of the answer substance.
● If the answer unit is grams, liters, or particles, find the number of moles of the answer substance
first. Then convert the moles of answer substance to the desired unit.
● If you have a calculator, try to calculate the solution to each problem yourself before turning on the
Show numerical solution checkbox.

Problems:

A. What volume of carbon dioxide (CO2) will be produced if 2.90 moles of iron (Fe) is produced? [Note:
In the Gizmo, it is assumed that all gases are at standard temperature and pressure, or STP.]

Given unit: 2.9 mol Fe Answer unit: L CO2 Solution: 97.5 L

CO2

B. What mass of iron (Fe) can be obtained from 3.80 g iron (III) oxide (Fe2O3) reacting with excess
carbon monoxide (CO)?

Given unit: 3.8 g Answer unit: g Fe Solution: 2.66 g Fe

Fe2O3

C. How many moles of iron (Fe) will be produced from 6.20 moles of carbon monoxide (CO) reacting
with excess iron (III) oxide (Fe2O3)?

Given unit: 6.2 mol Answer unit: mol Fe Solution: 4.13 mol
CO Fe

D. How many molecules of carbon monoxide (CO) are needed to react with excess iron (III) oxide
(Fe2O3) to produce 11.6 g of iron (Fe)?

Given unit: 11.6 g Fe Answer unit: molecules Solution: 1.88*1023

CO molecules
CO

6. On your own: Click New equation to try solving problems with a new chemical equation. There are five
equations in all, and five problems per equation. The Gizmo will keep track of how many problems you
solve. Good luck!
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved
Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved