Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    Injector Specification (RSN) : Assembly No: 38414

    Uploaded by

    johnny sabin
    The document provides specifications for an injector including opening pressure settings, valve lift, spray orifice size and number, sac type, return oil leakage rate, and a list of parts required. It also notes calibration fluid and piping requirements and cautions to check for chatter according to service manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Injector Specification (RSN) : Assembly No: 38414

    Uploaded by

    johnny sabin
    83 views1 page
    The document provides specifications for an injector including opening pressure settings, valve lift, spray orifice size and number, sac type, return oil leakage rate, and a list of parts required. It also notes calibration fluid and piping requirements and cautions to check for chatter according to service manuals.

    Original Title

    38414

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for an injector including opening pressure settings, valve lift, spray orifice size and number, sac type, return oil leakage rate, and a list of parts required. It also notes calibration fluid and piping requirements and cautions to check for chatter according to service manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views1 page

    Injector Specification (RSN) : Assembly No: 38414

    Uploaded by

    johnny sabin
    The document provides specifications for an injector including opening pressure settings, valve lift, spray orifice size and number, sac type, return oil leakage rate, and a list of parts required. It also notes calibration fluid and piping requirements and cautions to check for chatter according to service manuals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INJECTOR SPECIFICATION (RSN®)

    EDITION : 2
    ENGINE MODEL NO: 3029D (3) CYLINDER ASSEMBLY NO: 38414
    DATED: 03-09-06 SUPERSEDES: 34691
    CUSTOMER: JOHN DEERE CUSTOMER PART NO: RE-531437
    TEST STAND: ISO 8984 NOTE: Reference Pencil Nozzle Service Manual
    1. CALIBRATION FLUID…SAE J967 / ISO 4113 99002, Service Bulletin 467 & 467A
    (Ref. S.B. 201) AT ROOM TEMPERATURE (70°-80° F) for additional service information.
    2. CALIBRATION HIGH PRESSURE PIPES…0.063 X 12”
    (1.6 X 305 mm)

    INJECTOR SETTINGS
    THE FOLLOWING ITEMS USED IN CONJUNCTION WITH THE
    1. OPENING PRESSURE SETTINGS: NOZZLE ASSEMBLY ARE PURCHASED SEPARATELY:
    SET CHECK
    A. PROTECTIVE SHIPPING CAPS NO. 26888 & 26891
    ** NEW 3580 ± 40 PSI 3500 PSI MIN. B. NOZZLE CLAMP ASSEMBLY NO. 34683
    (246.5 ± 2.8 bar) (241.5 bar)
    SERVICE 3380 ± 40 PSI 3170 PSI MIN.
    (233 ± 2.8 bar) (218.5 bar)
    2. VALVE LIFT: TURN 7/8 ± 1/16 .0156 (0.4mm) NOMINAL
    3. SPRAY ORIFICE SIZE: .011 (0.279mm) * ASSEMBLY TORQUE:
    4. SPRAY ORIFICE NUMBER: 4 30683 75-85 lbf·in (8.5-9.6 N·m)
    5. SAC TYPE: TAPERED MINI 24186 35-45 lbf·in (4.0-5.1 N·m)
    6. CHECK NOZZLE “CHATTER” PER PENCIL NOZZLE SERVICE 38412 55-80 lbf·in (6.2-9.0 N·m)
    MANUAL 99002, SERVICE BULLETIN 467 & 467A.
    IFACCEPTABLE PROCEED TO STEP 7.
    7. RETURN OIL LEAKAGE: 1 TO 14 DROPS / 30 SECONDS
    MAX. AT 1500 PSI (SERVICE ONLY).

    ** SETTINGS FOR NEW NOZZLE OR WHEN A NEW PRESSURE


    ADJUSTING SPRING IS USED.
    ITEM PART QTY
    NO. NO. REQ. DESCRIPTION
    1 33002 1 SEAT, spring
    2 28910 1 SPRING, pressure adjusting
    3 28921 1 SCREW, pressure adjusting
    4 30683 * 1 LOCKNUT, pressure screw
    5 30610 1 SCREW, lift adjusting
    6 24186 * 1 LOCKNUT, lift screw
    7 28923 2 SEAL, o-ring
    8 38411 1 CONNECTOR, back-leakage
    9 38412 * 1 NUT, nozzle holder cap
    10 16389 1 SEAL, carbon stop
    11 26990 1 WASHER, plain
    12 34688 1 PLATE, injector locating

    FOR ENGINEERING USE ONLY

    DATE ECN NO. EDITION


    03-09-06 29362 1
    08-30-06 30257 2

    © STANADYNE Corporation, all rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
    form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.

    You might also like