Program IMMC2010

15th International Metallurgy & Materials Congress
15. Uluslararas Metalurji ve Malzeme Kongresi
TMMOB METALURJ MHENDSLER ODASI
PROGRAMME BOOK / PROGRAM KTABI
11-13 November / Kasm 2010

Leading Sponsors / Ana Sponsorlar
TYAP Fair, Convention & Congress Center, STANBUL-TURKEY
15th International Metallurgy & Materials Congress
15. Uluslararas Metalurji ve Malzeme Kongresi
IMMC 2010
Congress Programme / Kongre Program
UCTEA Chamber of Metallurgical Engineers TMMOB Metalurji Mhendisleri Odas
11 - 13 November 2010 STANBUL / TRKYE TYAP Fair, Convention and Congress Center
IMMC2010 | Programme Book
IMMC 2010
UCTEA Chamber of Metallurgical Engineers TMMOB Metalurji Mhendisleri Odas
2 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS
Program Kitab | IMMC2010
Organization Committee Kongre Yrtme Kurulu

Chairman / Bakan Prof.Dr. C.Hakan GR
Middle East Technical University
Coordinators / Koordinatrler Assoc.Prof.Dr. Caner DURUCAN Assist.Prof.Dr. Burak ZKAL Members / yeler Serdar A. EROL M.Erhan KOL Mahmut KPER Assoc.Prof.Dr. S. Can KURNAZ Assoc.Prof.Dr. Gkhan ORHAN Hseyin SAVA Assist.Prof.Dr. H. Emrah NALAN
Aveks ve D Ticaret A.. Erkunt Sanayi A.. Techn. Dpt. Foundation of Turkey Sakarya University Istanbul University
UCTEA Chamber of Metallurgical Eng.
Middle East Technical University Istanbul Technical University
TMMOB METALURJi MHENDiSLERi ODASI | 3
Session Coordinators Oturum Koordinatrleri

Biomaterials / Biyo-malzemeler Assoc.Prof. Dr. Caner DURUCAN
Iron and Steel Metallurgy / Demir elik Metalurjisi Dr. Abdi AYDODU Prof.Dr. Naci SEVN M.Uur YILMAZ
Mineral Research & Exploration Middle East Technical University skenderun Iron-Steel Integ. Plant
Non-Ferrous Metallurgy / Demir D Metaller Metalurjisi Prof.Dr. Cneyt ARSLAN Prof.Dr. smail DUMAN Assoc.Prof.Dr. Gkhan ORHAN Casting / Dkm M.Erhan KOL Prof.Dr. Ali KALKANLI Asst.Prof.Dr. Kazm TUR
Erkunt Sanayi A.. Middle East Technical University Atlm University Istanbul Technical University Istanbul Technical University Istanbul University
Recovery and Environmental Precautions in Metallurgy Geri Kazanm ve Metalurjide evre Koruyucu nlemler Prof.Dr. smail DUMAN Assoc.Prof.Dr. Gkhan ORHAN Heat Treatment / Isl lem Prof. Dr.Haluk ATALA Assoc.Prof.Dr. Arcan DERCOLU
Middle East Technical University Middle East Technical University Istanbul Technical University Istanbul University
Welding Metallurgy / Kaynak Metalurjisi Prof.Dr. Vedat AKDENZ Dr. Caner BATIGN
Middle East Technical University Middle East Technical University
Composite Materials / Kompozit Malzemeler Prof.Dr. Cevdet KAYNAK Assoc.Prof.Dr. S. Can KURNAZ
Middle East Technical University Sakarya University
Session Coordinators Oturum Koordinatrleri

Materials Characterization / Malzeme Karakterizasyonu Prof.Dr. Vedat AKDENZ Assoc.Prof.Dr. Arcan DERCOLU Prof.Dr. A. Macit ZENBA
Middle East Technical University Middle East Technical University Middle East Technical University
Metallic Materials / Metalik Malzemeler Prof. Dr. C.Hakan GR Prof. Dr. Rza GRBZ Prof.Dr. Eyp Sabri KAYALI Nano Materials / Nano-malzemeler Prof.Dr. A. Macit ZENBA Assist.Prof.Dr. Burak ZKAL Assist.Prof.Dr. H. Emrah NALAN
Middle East Technical University Istanbul Technical University Middle East Technical University Middle East Technical University Middle East Technical University Istanbul Technical University
Ceramic Materials, Glasses, Refractory Materials Seramik Malzemeler, Cam, Refrakter Malzemeler Prof.Dr. Bekir KARASU Prof.Dr. Abdullah ZTRK Assoc.Prof.Dr. Ender SUVACI Prof.Dr. Muharrem TMUN Powder Metallurgy / Toz Metalurjisi Prof.Dr. Nuri DURLU Prof.Dr. Ali KALKANLI Prof.Dr. Mehmet TRKER Surface Treatment / Yzey lemleri Assoc.Prof.Dr. Blent NAY Prof.Dr. Mustafa RGEN Prof.Dr. Fatih STEL
Dokuz Eyll University Istanbul Technical University Sakarya University TOBB University Middle East Technical University Gazi University Anadolu University Middle East Technical University Anadolu University Middle East Technical University
Advisory Board Kongre Danma Kurulu

Prof.Dr. Sheyla AYDIN Hayrettin AYCI Kubilay DAL Feyzi DEMR efik DOAN Prof.Dr. Niyazi ERUSLU Atamer GYC Dr. Hsniye GLER Yaylal GNAY Assoc.Prof.Dr. Sebahattin GRMEN Hseyin Alper HIZLI rfan KAPTI Assoc.Prof.Dr. Krat KAZMANLI Prof.Dr. Orhan erif KOMA Cemalettin KK Prof.Dr. Mzeyyen MAROLU Dr. Murat Can OCAKTAN A.Levend OTSUKARCI Hseyin NER Prof.Dr. Kazm NEL Prof.Dr. Ltfi VEOLU Ata ZDEMRLER Kaya ZEREN Prof.Dr. Tayfur ZTRK Alaattin Ayfer ZYURT Dr. Hakan SESGR Murat SEZER Tuncay ULAN Prof.Dr. Ylmaz TAPTIK Ahmet TEPROLU Prof.Dr. Ahmet TOPUZ Veysel YAYAN Prof.Dr. Fevzi YILMAZ Prof.Dr. brahim YUSUFOLU Prof.Dr. Onuralp YCEL M.nder YCEL
Istanbul Technical University Sarkuysan Electrolytic Copper Corp. Turkish Foundrymens Association UCTEA Chamber of Metallurgical Engineers Meta Metallurgical Corp. Yalova University Assan Aluminum Corp. Turkish Small & Medium Ind. Dev.Org. Gnay Advising Istanbul Technical University UCTEA Chamber of Metallurgical Engineers UCTEA Chamber of Metallurgical Engineers Istanbul Technical University Osmangazi University UCTEA Chamber of Metallurgical Engineers Yldz Technical University Trk Traktor Inductotherm Induction Systems Corp. Marmara Metal Products Corp. Dokuz Eyll University Istanbul Technical University Kaptan Iron-Steel Ind. UCTEA Chamber of Metallurgical Engineers Middle East Technical University ukurova Kimya Endstrisi Trkiye ECAM UCTEA Chamber of Metallurgical Engineers Componenta Dk. Tic. ve San. A.. Istanbul Technical University Sarkuysan Electrolytic Copper Corp. Yldz Technical University Turkish Iron & Steel Producers Association Istanbul Arel University Istanbul University Istanbul Technical University ASSAB Steel & Heat Treatment Corp.
International Scientific Committee Uluslararas Bilim Kurulu

Prof.Dr. lhan AKSAY Prof.Dr. Igor ALEXANDROV Prof.Dr. Gehan AMARATUNGA Prof.Dr. Leandru G. BUJOREANU Prof.Dr. Ali ERDEMIR Prof.Dr. Hrman ERIC Prof.Dr. Zoltan GACSI Prof.Dr. Jianfeng GU Prof.Dr. Janez GRUM Prof.Dr. Peter HODGSON Prof.Dr. Yutaka KAGAWA Prof.Dr. Hyoung Seop KIM Prof.Dr. Xavier KLEBER Prof.Dr. Vladimir KOZHUKHAROV Prof.Dr. Bernardo HERNANDEZ-MORALES Prof.Dr. Mihriban zden PEKGULERYUZ Prof.Dr. Gustavo SNCHEZ-SARMIENTO Prof.Dr. Vladimir I. SHATOKHA Prof.Dr. Bozo SMOLJAN Prof.Dr. Michael STELTER Prof.Dr. Murat TIRYAKIOGLU Prof.Dr. M. Reza TOROGHINEJAD Prof.Dr. George E. TOTTEN Assoc.Prof.Dr. Anish UPADHYAYA Prof.Dr. Alfonso J. Vazquez-VAAMONDE Prof.Dr. Hans Werner ZOCH Princeton University, USA Ufa State Aviation Technical University, Russia University of Cambridge, UK Gheorghe Asachi Technical University of IASI, Romania Argonne National Laboratories, USA University of the Witwatersrand, South Africa Miskolc University, Hungary Jiao Tong University, China University of Ljubljana, Slovenia Deakin University, Australia University of Tokyo, Japan POSTECH, South Korea INSA-Lyon, France University of Chemical Technology & Metallurgy, Bulgaria Universidad Nacional Autnoma de Mxico, Mexico Mc Gill University, Canada University of Buenos Aires, Argentina National Metallurgical Academy, Ukraine University of Rijeka, Croatia TU Bergakademie Freiberg, Germany Robert Morris University, USA Isfahan University of Technology, Iran Texas A&M University, USA Indian Institute of Technology Kanpur, India National Center of Metallurgical Investigations, Spain IWT-Bremen, Germany
The Chamber of Metallurgical Engineers (CME) is a non-profit public organization founded in 1970 and is one of twenty-two Chambers, which constitute the Union of Chambers of Turkish Engineers and Architects. The CME membership at currently 4000 is increasing each year with new graduates from national and foreign universities. The main functions of CME are to organize required and necessary activities and conduct studies in broad fields of production, shaping, improving properties, destructive and nondestructive testing of metallic and nonmetallic materials, however, announcing the new technologies and the knowledges for the use and benefits of the members of CME and the country. Within this context CME publishes a bimonthly journal entitled METALURJI and a bulletin called BULTEN in which news related to metallurgy and materials science appear. CME also organizes seminars, symposiums, panels, forums, congresses and fairs. The supreme governing body of CME is the General Assembly which consists of the Chamber members and is done biannually. Board of Directors elected at the General Assembly is responsible from the execution of the functions mentioned above. Additionally, detailed studies on certain specific subjects are made by work groups that consist of specialists from universities, research institutions and the industry and established by the board of Directors.
UCTEA Chamber of Metallurgical Engineers
Trk Mhendis ve Mimar Odalar Birliine bal olarak ilgili yasa hkmlerine uygun ekilde 1970 ylnda kurulan Metalurji Mhendisleri Odas, kamu kurumu niteliinde bir meslek kuruluudur. Halen 4000 olan Metalurji Mhendisleri Odas ye says, her yl metalurji dalnda mhendislik eitimi veren yurtii ve yurtd niversitelerinden mezun olanlarla artmaktadr. lke ve Oda yelerinin hak ve yararlar gzetilerek, metal ve metal d malzemelerin retimi, ekillendirilmesi, zelliklerinin gelitirilmesi, hasarl ve hasarsz kontrolleri vb. alanlarda, ihtiya duyulan ve gerek grlen etkinliklerin organizasyonu ve almalarn yaplmas, sektrmzde yaplan almalarn, yeni teknolojilerin ve bilgi birikiminin eitli aralarla meslektalarmza ve sektr mensuplarna duyurulmas, yelerin durumlarnn iyiletirilmesi, oda amalarnn temelini oluturmaktadr. Bu amalar dorultusunda Metalurji Mhendisleri Odas iki ayda bir METALURJ dergisini ve Oda faaliyetlerinin, sektrel haberlerin gncel ekilde aktarld BLTENi yaynlamakta ve seminer, sempozyum, panel, forum, kongre, fuar gibi etkinlikler organize etmektedir. ki ylda bir yaplan ve Odaya kaytl yelerin katlmyla gerekletirilen Genel Kurullarda oluan Oda Ynetim Kurulu yukarda bahsedilen almalarn yrtlmesinden sorumludur. Ayrca, Oda Ynetim Kurulunca oluturulan ve niversite, aratrma kurulular ve sanayiden uzmanlarn yer ald alma gruplarnca belli konularda ayrntl almalar yaplmaktadr.
TMMOB Metalurji Mhendisleri Odas
Invited Lecturers / Davetli Konumaclar

11 November Thursday 11 Kasm Perembe 2010
Hall Karadeniz / Salon Karadeniz
13:30-14:00 Materials Education Today - an European View Pedro Dolabella Portella The Federation of European Materials Societies (FEMS), Germany

14:00-14:40 Micro-Nano Scale: Basic Science to Practical Systems and Commercial Applications Meyya Meyyappan - NASA Ames Research Center, USA

15:00-15:30 Opto-Electronic Properties of Graphene Oxide Manish Chhowalla - Rutgers University, USA
12 November Friday 12 Kasm Cuma 2010

Hall Marmara / Salon Marmara
11:15-11:45 Study of Precipitation in Next Generation HSLA Steels Peter Hodgson - Deakin University, Australia
12 November Friday 12 Kasm Cuma 2010

13:30-14:00 Recent Development of High Mechanical Bio-functional Metallic Biomaterials Mitsuo Niinomi - Tohoku University, Japan
13 November Saturday 13 Kasm Cumartesi 2010

11:15-11:45 Trkiyede ve Dnyada Demir elik Sektrnn Durumu A Review of Iron & Steel Industry: Turkey and the World Suhat Korkmaz - Tosyal Holding, Trkiye
13 November Saturday 13 Kasm Cumartesi 2010

13:30-14:00 Heat Treatment: State-Of-The Art, Future Trends George E. Totten - Texas A&M University, USA

Meyya Meyyappan
Meyya Meyyappan is Chief Scientist for Exploration Technology at the Center for Nanotechnology, NASA Ames Research Center in Moffett Field, CA. Until June 2006, he served as the Director of the Center for Nanotechnology as well as Senior Scientist. He is a founding member of the Interagency Working Group on Nanotechnology (IWGN) established by the Office of Science and Technology Policy (OSTP). The IWGN is responsible for putting together the National Nanotechnology Initiative. Dr. Meyyappan has authored or co-authored over 190 articles in peer-reviewed journals and made over 200 Invited/Keynote/Plenary Talks in nanotechnology subjects across the world. His research interests include carbon nanotubes and various inorganic nanowires, their growth and characterization, and application development in chemical and biosensors, instrumentation, electronics and optoelectronics. Dr. Meyyappan is a Fellow of the Institute of Electrical and Electronics Engineers (IEEE), the Electrochemical Society (ECS), AVS, the Materials Research Society (MRS) and the California Council of Science and Technology. He is a member of the American Society of Mechanical Engineers (ASME) and the American Institute of Chemical Engineers (AIChE). He is currently the IEEE Nanotechnology Council (NTC) Distinguished Lecturer on Nanotechnology, IEEE Electron Devices Society (EDS) Distinguished Lecturer, and was ASMEs Distinguished Lecturer on Nanotechnology (2004-2006). He served as the President of the IEEEs Nanotechnology Council in 2006-2007. For his contributions and leadership in nanotechnology, he has received numerous awards including: a Presidential Meritorious Award; NASAs Outstanding Leadership Medal; Arthur Flemming Award given by the Arthur Flemming Foundation and the George Washington University; IEEE Judith Resnick Award; IEEE-USA Harry Diamond Award; AIChE Nanoscale Science and Engineering Forum Award. For his sustained contributions to nanotechnology, he was inducted into the Silicon Valley Engineering Council Hall of Fame in February 2009. For his educational contributions, he has received: Outstanding Recognition Award from the NASA Office of Education; the Engineer of the Year Award (2004) by the San Francisco Section of the American Institute of Aeronautics and Astronautics (AIAA); IEEE-EDS Education Award; IEEEEAB (Educational Activities Board) Meritorious Achievement Award in Continuing Education.

Mitsuo Niinomi
Director of Institute for Materials Research, Tohoku University, Japan 1973 BS (Dept. of Metallurgical Eng., Nagoya Univ.) 1975 MSc (Nagoya Univ., Dept. of Metallurgical Eng., Steel and Iron Eng) 1979 PhD (Nagoya Univ., Dept. of Metallurgical Eng., Steel and Iron Eng.) 1980-1989 Res. Associate, Dept. of Production Systems Eng., Toyohashi Univ. of Technology 1989-1995 Associate Professor 1995-Sept. 2005 Professor, Dept. of Production Systems Eng., Toyohashi Univ. of Technology 2003 Dental Dr. of Science (Aichi-Gakuin University) Oct. 2005- Professor, Dept. of Biomaterials Sci., Inst. for Materials Research, Tohoku Univ. 1988-1989: Visiting Associate Professor, Carnegie-Mellon University (USA) July 1997-December 1997: Visiting Professor, The University of Dayton (USA) Foreign Researcher: Material Institute, Wright Patterson Air Force Base, US Air Force 1999-2002&2003-2005: Professor, Future Technology Center, Toyohashi Univ. of Technology 2000-2001: Visiting Researcher, Sizuoka Research Inst. and Hamamatus Research Inst. 2002: Lecturer (part-time) Tokyo Univ., Nagoya Inst. of Techn., Kyushu Inst. of Techn. 2005-2006: Visiting Prof. and Lecturer (part time) with Toyohashi Univ. of Technology 2005-2006: Lecturer (part-time) with Nagoya Univ. 2005-: Specialist with Pharmaceuticals and Medical Devices Agency 2006-2014: Cooperate Member of Science Council of Japan April 2008-November 2009: Specially Appointed Assistant for President, Tohoku Univ. Awards: 1986 Nagai Academic Award (Nagai Foundation) 1986 Best Technical Paper Award (Japan Institute of light Metals) 1986 Technical Award (Nikkan Kogyo Sinbun) 1994 Nishiyama Memorial Award (Iron and Steel Institute of Japan) 1993 Best Technical Paper Award (Japan Institute of Light Metals) 1993 Technical Award (Nikkan Kogyou Sinbun) 2000 Technical Award (Japan Titanium Association) 2002 Metals Technical Development Award (Japan Institute of Metals) 2003 Best Poster Presentation Award (JSME/ASME Int. Conf. on Materials and Processing) 2003 Best Technical Paper Award (Japan Institute of Metals) 2003 Nishio Civil Praise (Nishio-city) 2004 Best Technical Paper Award (Japan Institute of Metals) 2005 Award for Distinguished Contribution (Japan Institute of Light Metals 2005 Metals Technical Development Award (Japan Institute of Metals) 2006 Kobayashi Award (Technical Paper Award) (Japan Foundry Engineering Soc.) 2007 Metals Best Poster Award(Japan Institute of Metals) 2007 Best Poster Awards (for 2 posters) The 11th World Conference on Titanium, Kyoto, 2008 Lee Hsun Lecture Award (Inst. for Metals Research, Chinese Academy of Science) 2008 Metals Best Poster Award (Japan Institute of Metals) 2009 Metals Distinguished Contribution Award (Japan Institute of Metals) 2009 Metals Best Poster Award (Japan Institute of Metals) 2009 Best Paper Presentation Award (The Japanese Society for Dental Materials & Devices) 2009 Tanikawa-Harris Award (The Japan Institute of Metals)

George E. Totten
George E. Totten received his BS and MS degrees from Fairleigh Dickinson University in New Jersey and his Ph.D. from New York University. He is a visiting professor at the University of Sao Paulo and an adjunct professor at Texas A&M University as well as president of G.E. Totten & Associates, LLC, a research and consulting firm specializing in Thermal Processing and Industrial Lubrication problems. Dr. Totten is past-president (2002-2003) of the International Federation for Heat Treating and Surface Engineering (IFHTSE) and a fellow of ASM International, SAE International, ASTM and IFHTSE. Dr. Totten is the coauthor or coeditor of approximately 550 publications including patents, technical papers and books among which include: Theory and Technology of Quenching, Handbook of Aluminum Vol. 1 and Vol. 2, Handbook of Quenchants and Quenching Technology, Steel Heat Treatment Handbook - Vol. 1 and Vol. 2, Handbook of Residual Stress and Deformation of Steel, Handbook of Metallurgical Design, Handbook of Hydraulic Fluid Technology, Handbook of Lubrication and Tribology (Vol.1: Application and Maintenance), and the ASTM Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing (MNL 37) - among others.

Peter Hodgson
Director of Research, ITRI, Deakin University, Australia
PhD, University of Queensland, Queensland, Australia (1994) B.Eng (Hon), Monash University, Melbourne, Australia, (1979) DHC, Valenciennes (2005) 2009 -2014: ARC Laureatte Fellow 2008-present: Director, Institute for Technology Research and Innovation, Deakin Univ. 2006-2008: Director, Centre for Material and Fibre Innovation, Deakin Univ. 2005-present: ARC Federation Fellow 1995- 2004: Professor of Engineering, Deakin Univ. 2001- present: Associate Dean, Research, Deakin Univ. 1999- 2001: Head of School, Engineering and Technology Deakin Univ. 1985 -1995: BHP Research Professor Hodgson worked in industry at the then BHP Research Laboratories in Melbourne for 16 years. He gained his PhD in 1994 and in 1996 moved to Deakin University as the Chair in Engineering. He has grown the research activities from a very low base to now having almost 200 students and research funded staff. In 2009 he was appointed as the Director of the Institute for Technology Research and Innovation, a multidisciplinary research centre at Deakin with 230 researchers and research students. Professor Hodgsons research includes steel processing and the development of new alloys, and downstream ferrous and non-ferrous manufacturing processes associated with the automotive industry. He currently holds several ARC Discovery and Linkage grants, all related to metal processing. In 2004 he was made an Alfred Deakin Professor of the University for outstanding contributions to research and awarded an ARC Federation Fellow by the Australian Research Council in 2004. The University of Valenciennes award made him an Honoris Doctoris Causa in 2005 for contributions to metal forming research, while in 2006 AGH in Poland awarded him an Honorary Medal for contributions to materials science. In 2009 he was awarded an ARC Laureatte Fellowship to pursue research related to the next generation of cleaner manufacturing processes and products. He has over 500 publications and over 30 invited and keynote lectures at international conferences. In the past his work on modelling of thermo-mechanical processing and ultrafine grain steels has received great interest. At present his work is focussing on advanced high strength steels and their characterisation by advanced methods, nano-bainites, precipitation hardening, nano-structured metals and surface engineering.

Manish Chhowalla
Manish Chhowalla is a Professor in the Materials Science and Engineering Department at Rutgers University. From June 2009 - July 2010, he was a Professor in the Department of Materials at Imperial College London. Prior to Imperial, he was an Associate Professor and the Donald H. Jacobs Chair at Rutgers University in NJ USA. At Rutgers University he awarded the prestigious NSF CAREER Award for young scientists as well as the Sigma Xi Outstanding Young Investigator for the Mid Atlantic Region. Before Rutgers, he was a Royal Academy of Engineering Research Fellow at the University of Cambridge after completing his Ph.D. in Electrical Engineering there. Prior to his PhD, he worked for Multi-Arc Inc. (now Ion Bond) where he developed one of the first applications of amorphous diamond thin films. His technological interests are in the synthesis and characterization of novel carbon materials and their incorporation into devices for electrical, optical and mechanical applications. Fundamentally, he is interested in understanding the role of disorder in determining material properties. His research topics presently include investigation of the optoelectronic properties of graphene and carbon nanotubes, organic memory and photovoltaic devices, structural properties of boron carbide, nanostructuring in alumina/spinel nanocomposites, and deposition of carbide and nitride thin films. He has over 100 publications with nearly 5000 citations on these topics and has given more than 75 invited/keynote/plenary lectures. He has served on organizing committees for numerous international conferences.

Pedro Dolabella Portella
Born 1955 in Rio de Janeiro, Brazil B.Eng. in metallurgical engineering, Instituto Militar de Engenharia (IME), Rio de Janeiro, 1977 M.Sc. in materials science and engineering, Instituto Militar de Engenharia (IME), Rio de Janeiro, 1979 Dr.-Ing. in materials science and engineering, University of Erlangen-Nuremberg, 1984, with a thesis on the cyclic creep behaviour of Alloy 800 H Assistant professor, Department of Materials Science and Metallurgical Engineering (DCMM), Pontifcia Universidade Catlica do Rio de Janeiro (PUC-Rio) (1984 1987) Scientist at BAM Federal Institute for Materials Research and Testing (1987 1992) Head of laboratory Metallography and Ceramography (1992 1995) Head of divison Microstructural Characterization (1996 1999) Head of department Materials Engineering (since January 2000) Research interests Mechanical behaviour of metallic materials for high temperature applications Phase transitions in metallic materials Materialography Failure analysis and prevention Honorary positions President of the Federation of European Materials Societies (FEMS), 2010 - 2011 Secretary general of the German Federation Materials Science and Engineering (BV MatWerk, www.matwerk.de) Spokesperson of the DFG-Review board 406-02 Metallic, ceramic and polymeric materials (DFG - German Research Foundation) Member of the panel Engineering Physics, Materials and Processes of ASIIN (ASIIN - Akkreditierungsagentur fr Studiengnge der Ingenieurwissenschaften, der Informatik, der Naturwissenschaften und der Mathematik) Member of the editorial boards of Praktische Metallographie; Journal of Failure Analysis and Prevention; Revista Brasileira de Ps-Graduao Awards August Whler Award, DVM (2010)

Suhat Korkmaz
Suhat Korkmaz was born in 01.02.1964 in Artvin/Yusufeli. He was graduated from Samsun high school with high honour degree in 1982 and graduated from the Faculty of Metalurgy Engineering of METU / Ankara in 1987 with high honour degree. During the years 1988 -1992, he had finished his master degree on Business Administration in Social Sciences Institute of Cukurova University. In the same university, he had completed his PhD in the Division of Production Management during the years 1993-1998. He had started his professional career in Iskenderun Iron and Steel Works Inc. in 1987, at Calibration Directorate of rolling mills. He worked as an Chief Engineer between the years 1989 -1994 at the same place. Between 1994-2003 he respectively worked as Steel Plant Manager, Production Planning - Quality Assurance Manager and Management Representative in Yazc Iron and Steel Industry and Trade A.. Between 2003-2006 he respectively worked as, Auditor, Sales and Marketing Executive Vice President, General Manager and Board Member in Iskenderun Iron and Steel Enterprises, and he had served as member of directors in Erenco and Erdemir Mining. In April, 2006, he began as member of the Executive Committee of Tosyal Holding, and currently he works as CEO. He can speak advanced English and also moderately German and Arabic languages. He is member of Association of Engineers and Architects, Chamber of Metallurgical Engineers, Kalder and Tekder. He is also member of the Board in Association of Construction Equipment Manufacturers and Executive Board Member & Chairman in MUSIAD/Hatay Branch. He is married and has 3 children.
IMMC 2010 PROGRAMME / PROGRAM

11 November Thursday // 11 Kasm Perembe 2010
TIME/SAAT 13:30-14:45
HALL/SALON KARADENZ
Plenary Session Bilimsel ve Teknik Al Nanomaterials 1 Nano Malzemeler 1 Nanomaterials 2 Nano Malzemeler 2
HALL/SALON MARMARA
HALL/SALON HEYBEL
15:00-16:15
Composite Materials 1 Kompozit Malzemeler 1 Composite Materials 2 Kompozit Malzemeler 2
16:30-17:45
12 November Friday // 12 Kasm Cuma 2010

TIME/SAAT 10:00-11:00
HALL/SALON KARADENZ
Materials Characterization 1 Malzeme Karakterizasyonu 1 Materials Characterization 2 Malzeme Karakterizasyonu 2 Biomaterials Biyo-Malzemeler Powder Metallurgy Toz Metalurjisi
HALL/SALON MARMARA
Metallic Materials 1 Metalik Malzemeler 1 Metallic Materials 2 Metalik Malzemeler 2 Metallic Materials 3 Metalik Malzemeler 3 Non-Ferrous Metallurgy Demir D Metaller Metalurjisi Recovery and Environmental Precautions in Metallurgy Geri Kazanm ve Metalurjide evre Koruyucu nlemler
HALL/SALON HEYBEL
11:15-12:30
13:30-14:45
15:00-16:15
Metallic Materials 4 Metalik Malzemeler 4
16:30-17:45
Welding Metallurgy Kaynak Metalurjisi
Metallic Materials 5 Metalik Malzemeler 5
13 November Saturday // 13 Kasm Cumartesi 2010

TIME/SAAT 10:00-11:00
HALL/SALON KARADENZ
Iron and Steel Metallurgy 1 Demir-elik Metalurjisi 1 Iron and Steel Metallurgy 2 Demir-elik Metalurjisi 2 Heat Treatment Isl lem Surface Treatment 1 Yzey lemleri 1 Surface Treatment 2 Yzey lemleri 2 Closing Session Kapan Oturumu
HALL/SALON MARMARA
Casting 1 Dkm 1 Casting 2 Dkm 2 Ceramics, Glasses, Refractories 1 Seramik, Cam, Refrakter Malzemeler 1 Ceramics, Glasses, Refractories 2 Seramik, Cam, Refrakter Malzemeler 2 Ceramics, Glasses, Refractories 3 Seramik, Cam, Refrakter Malzemeler 3
HALL/SALON HEYBEL
11:15-12:30
13:30-14:45
15:00-16:15
16:30-17:45
18:00-18:30
11 November - 11 Kasm 2010

09:00
Registration Kayt Opening Ceremony (Congress and Trade Fair) Kongreler ve Fuarlar Ortak Al Konumalar Fairs Opening Fuar Al
10:30-12:00
12:00-12:30
HALL KARADENZ / SALON KARADENZ
PLENARY SESSION / BLMSEL ve TEKNK AILI

Session Chairman / Oturum Bakan: C. HAKAN GR
13:30-14:00 Materials Education Today - an European View
Pedro Dolabella Portella The Federation of European Materials Societies (FEMS) Germany (Invited Lecturer / Davetli Konumac)
14:00-14:45 Micro-Nano Scale: Basic Science to Practical Systems and Commercial Applications
Meyya Meyyappan NASA Ames Research Center USA (Invited Lecturer / Davetli Konumac)

NANOMATERIALS 1 NANO MALZEMELER 1

Session Chairman / Oturum Bakan: H. EMRAH NALAN
15:00-15:30 Opto-Electronic Properties of Graphene Oxide
Manish Chhowalla Rutgers University USA (Invited Lecturer / Davetli Konumac)
15:30-15:45 Structural and Magnetic Properties of the Nanocomposites Fe/SiO2

Amel Kihal, Bouzabata Bouguerra, Gerard Fillion, D. Fruchart University of Badji Mokhtar, Institute of Neel Algeria, France
15:45-16:00 Synthesis of CuO/NiO Nanopowders via Alkalinization Precipitation Process

Roya Roohibakhsh, Hamid Reza Rezaie, Hekmat Razavizadeh Iran University of Science and Technology Iran
16:00-16:15 Optimum Porous Silicon Parameters for Antireection Solar Cell, using Transfer Matrix Method (TMM)
Naser M.Ahmed Al-rawi, Yarub Al-Douri, Zainuriah Hassan USM-School of Physics-Penang, Unimap School of Microelectronic Engineering Malaysia
16:15-16:30 Production of Core-Shell Type FTO/TiO2 Nanoparticles for Dye Sensitized Solar Cells Boyayla Uyarlm Gne Pilleri iin ekirdek-Kabuk Tipi FTO/TiO2 Nanoparack retimi
Kerem aatay li, A. Macit zenba Middle East Technical University Trkiye
Notes / Notlar

NANOMATERIALS 2 NANO MALZEMELER 2

Session Chairman / Oturum Bakan: A. MACT ZENBA
16:45-17:00 MoO3in ndirgenmesi ve Karbrizasyonu Yoluyla nce Mo2C Toz Sentezi Synthesis of Fine Mo2C Powders by Reduction and Carburization of MoO3
enol etinkaya, erafettin Erolu Istanbul University Trkiye
17:00-17:15 inko Oksit Nano Paracklarn Mikro Emlsiyon Teknii ile Sentezlenmesi ve Mikro Emlsiyon Formlasyonunun Parack Morfolojisine Etkisi Synthesis of Zinc Oxide Nanoparticles by Microemulsion Method and the Effect of Microemulsion Formulation on Particle Morphology
zlem Altnta Yldrm, Caner Durucan Middle East Technical University Trkiye
17:15-17:30 Nano Boyutta Almina ncl Almoksanin Glikotermal Sentezi ve Karakterizasyonu Glycothermal Synthesis and Characterization of Alumoxane as Nano Sized Alumina Precursor
Korhan Sezgiker, Bora Mavi, ner olak, Gngr Gndz Middle East Technical University, Hacettepe University Trkiye
17:30-17:45 Karbon Nanotp Takviyeli Almina Seramik Dililerin Elektrokinetik Biriktirme Yntemiyle retim ve Karakterizasyonu Processing and Characterization of Carbon Nanotube Reinforced Alumina Ceramic Gears by Electrophoretic Deposition
Ali Can Zaman, Cem B. stnda, Cengiz Kaya Yldz Technical University Trkiye
17:45-18:00 Kimyasal Buhar Biriktirilme Yntemiyle Ni (A. % 70)-Fe Katalist ve Metan Kullanlarak Karbon Nanober Bytlmesi Growth of Carbon Nanober by Chemical Vapor Deposition using Ni (70 wt%)-Fe Catalyst and Methane
Melek Cumbul Altay, erafettin Erolu Istanbul University Trkiye
18:00-18:15 Yksek Alevlenme Dayanml Polimer Bazl Karbon-Nanotp ve Kil Katkl Nanokompozitler High Flame Retardancy Carbon Nanotube and Nanoclay Reinforced Polymer Nanocomposites
N.Ali Itman, H.zgr Gndz, B.Melike Kuuolu, Cevdet Kaynak Middle East Technical University Trkiye

HALL MARMARA / SALON MARMARA
COMPOSITE MATERIALS 1 KOMPOZT MALZEMELER 1

Session Chairman / Oturum Bakan: CEVDET KAYNAK
15:00-15:15 Dk Hzl Darbe Yklemeleri Sonras Cam Fiber Takviyeli Polyester Kompozitlerde Ortaya kan Hasar Konisinin ncelenmesi Damage Cone Investigation Occured in Glass Reinforced Polyester Composite after Low Velocity Impact Loading
Sinan Fidan, Tamer Snmazelik, Onur oban, Mustafa zgr Bora Kocaeli University Trkiye
15:15-15:30 Ti lavesinin AlSi9Mg-B4Cp Kompozitlerinde Islatlabilirlie ve Partikl lave Verimine Etkisi The Effect of Ti Addition on the Wettability and Particle Addition Yield in AlSi9Mg-B4Cp Composites
Fatih Toptan, Mustafa idem, Il Kerti Yldz Technical University Trkiye
15:30-15:45 Kartrmal Dkm Yntemiyle retilen Al-B4Cp Kompozitlerin Abrazif Anma Davran Abrasive Wear Behaviour of Al-B4Cp Composites Produced by Using Stir Casting Method
Aykut anak Karadeniz Technical University Trkiye
15:45-16:00 MgO-Spinele Zirkon-Y2O3 lavesiyle retilen Kompozitlerin Isl ok Performansnn Aratrlmas ve Mikroyapsal Karakterizasyonu Microstructural Characterisation of Thermal Shock Performance of MgO-Spinel Composite Refractories Produced with the Addition of Zircon-Y2O3
Cemail Aksel, Tuba Aksoy Anadolu University Trkiye
16:00-16:15 Cu-SiC Kompozitlerinin retimi ve Karakterizasyonu Production and Characterization of Cu-SiC Composites
G.F.elebi Efe, T. Yener, . Altnsoy, M. pek, S. Zeytin, C. Bindal Sakarya University Trkiye
16:15-16:30 Preparation of Silicon Carbide-Aluminum Surface Composites by Friction Stir Processing (FSP) and their Properties Silisyum Karbr-Alminyum Yzey Kompozitlerinin Srtnme Kartrma Yntemi ile retimi ve zellikleri
Hasan Erdem amurlu, Narin nal Akdeniz University Trkiye

COMPOSITE MATERIALS KOMPOZT MALZEMELER 2

Session Chairman / Oturum Bakan: S. CAN KURNAZ
16:45-17:00 MgO-MgAl2O4-ZrO2 Kompozit Refrakterlerin Korozyon Direncinin Aratrlmas Investigation of Corrosion Resistance of MgO-MgAl2O4-ZrO2 Composite Refractories
Cemail Aksel, Rasim Ceylantekin Anadolu University Trkiye
17:00-17:15 Investigating the Correlation between the Porosity, Wear Resistance and the Production Method of AlSiCp Composites
Andrea Simon, Evren Tan, C. Hakan Gr, Tadeusz Pieczonka, Zoltan Gacsi4 University of Miskolc, Middle East Technical University, AGH University of Science and Technology, 4University of Miskolc Hungary, Turkey, Poland Mohammed Saidi, Boudjemaa Bezzazi , Messaoud Hamiane, Abdelbaki Benmounah University M Hamed Bougara of Boumerdes Algeria
17:15-17:30 Repair of the Mortars Damage by Composite Materials
17:30-17:45 Inuence of Cu Addition on Wear Properties of Cast In-Situ Al-17wt%Mg2Si Metal Matrix Composite
Noushin Nasiri, Masud Emamy, Hadi Hosseinzadeh, Amir Reza Sohrabi Tehran University Iran Roohollah Jamaati, Mohammad Reza Toroghinejad Isfahan University of Technology Iran
17:45-18:00 Production of Aluminum/Alumina Composite by New Methods
18:00-18:15 Production of Micro-Nano Al-Al2O3 Composite and Investigation on the Mechanical Properties
Mohsen Hosseinzadeh, Omid Mirzaee, Peyman Saidi Semnan University,Ferdowsi University Iran Notes / Notlar

MATERIALS CHARACTERIZATION 1 MALZEME KARAKTERZASYONU 1

Session Chairman / Oturum Bakan: VEDAT AKDENZ
10:00-10:15 Phase Transformation Study of Fe-Ni-Mn Martensitic Steel During Intercritical Annealing Heat Treatment by Means of EBSD and X-Ray
Hassan Shirazi, M.Nili Ahmadabadi, H.Ghasemi Nanesa, Tadashi Furuhara, Behrang Poorganji, M.Khani Ooshani, S.Hossein Nedjad University of Tehran, Tohoku University, Sahand University of Technologhy Iran, Japan
10:15-10:30 Materials Characterization of Iron and Slag Finds of the Early Medieval Avar Metallurgists
Bela Trk, Arpad Kovacs University of Miskolc Hungary
10:30-10:45 On-line Monitoring of PDMS Surface Modication using Photothermal Deection (Ar, Co2 Laser) and CdS Sensor
Najmeh Najmoddin,, Mohammad Khosroshahi Amirkabir University of Technology, Iran University of Science and Technology Iran
10:45-11:00 Statistical Reliability of EBSD Data Sets for the Characterization of Al-alloyed TRIP Steels
Kemal Davut, Stefan Zaefferer Max-Planck-Institut fuer Eisenforschung GmbH Germany
Notes / Notlar

MATERIALS CHARACTERIZATION 2 MALZEME KARAKTERZASYONU 2

Session Chairman / Oturum Bakan: ARCAN DERCOLU
11:15-11:30 New Investigation Study of Porous Silicon Stiffness
Yarub Al-Douri, N.M. Ahmed University Malaysia Perlis, University Sains Malaysia Malaysia
11:30-11:45 ri Hacimli Amorf/Nanokristal Fe-Co-Nd-B Manyetik Alamlarnn Sentezlenmesi Synthesis of Bulk Amorphous/Nanocrystalline Fe-Co-Nd-B Magnetic Alloys
Mehmet Yldrm, M. Vedat Akdeniz, Amdullah O. Mekhrabov Middle East Technical University Trkiye
11:45-12:00 Deien Demir Oranlarnda Ni-Al-Fe Alamlarnn Manyetik zelliklerine Etkisi Magnetic Properties of Ni-Al-Fe Alloys with Varying Iron Content
Nagehan Duman, Amdullah O. Mekhrabov, M. Vedat Akdeniz Middle East Technical University Trkiye
12:00-12:15 Temperlenmi Beynitik Bir eliin Korozyon Davran: Mikroyapsal Deiimler zerine Bir Etd Corrosion Behavior of a Tempered Bainitic Steel: A Study on Microstructural Changes
.Hakan Atapek, eyda Polat, adi Karagz Kocaeli University Trkiye
12:15-12:30 Inuence of Laser Peening Conditions on Surface Corrosion Resistance of Aluminium Alloy
U. Trdan, J. Grum, J.L. Ocana University of Ljubljana, Centro Laser U.P.M. Slovenia, Spain
Notes / Notlar

BIOMATERIALS BYO-MALZEMELER
Session Chairman / Oturum Bakan: CANER DURUCAN
13:30-14:00 Recent Development of High Mechanical Bio-Functional Metallic Biomaterials
Mitsuo Niinomi Tohoku University Japan (Invited Lecturer / Davetli Konumac)
14:00-14:15 Effects of High-Pressure Torsion Processing on Microstructure and Mechanical Properties of Biomedical -type Titanium Alloys
Hakan Ylmazer, Mitsuo Niinomi, Toshikazu Akahori, Masaaki Nakai, Yoshikazu Todaka Tohoku University, Meijo University, Toyohashi University of Technology Japan
14:15-14:30 Superparamagnetic Iron Oxide Nanoparticles for Biomedical Applications Biyomedikal Uygulamalar iin Sperparamanyetik Demir Oksit Nanoparacklar
A. Macit zenba, zge Acarba Baltac Middle East Technical University Trkiye
14:30-14:45 Makroporoz Hidroksiapatit Seramik Tplerin Elektrokinetik Biriktirme Yntemi ile ekillendirilmesi Electrophoretic Deposition Formation of Macroporous Hydroxyapatite Ceramic Tubes
Cem Blent stnda, Cengiz Kaya, Koji Loku, Masanobu Kamitakahara Yldz Technical University, Tohoku University Trkiye, Japan
Notes / Notlar

POWDER METALLURGY 1 TOZ METALURJS 1

Session Chairman / Oturum Bakan: MEHMET TRKER
15:00-15:15 Boluk Yapc Boyut ve eklinin Yksek Oranda Gzenek eren Demir Esasl Malzemenin Mikroyap ve Mekanik zelliklerine Etkisi Effect of Space Holder Size and Shape on Microstructure and Mechanical Properties of Highly Porous Iron Based Material
Nuray Bekz, Enver Oktay Istanbul University Trkiye
15:15-15:30 Farkl Geometrik ekilli Katmanlara Sahip Alminyum Sandvi Kpklerin retimi ve Basma zelliklerinin ncelenmesi Production of Aluminum Foam Sandwich with Various Geometric Shapes and Investigation of Their Compressive Properties
Arif Uzun, Mehmet Trker Kastamonu University, Gazi University Trkiye
15:30-15:45 Gzenekli TiNi ekil Bellekli Alamlarnn retilmesi ve Karakterizasyonu Production and Characterization of Porous TiNi Shape Memory Alloys
Tark Aydomu, akir Bor Middle East Technical University Trkiye
15:45-16:00 Ti-50.8 at%Ni Kpks Malzemelerin retimi ve Mekanik Karakterizasyonu The Production and Mechanical Characterization of Ti-50.8 at%Ni Porous Materials
G. pek Naka, A. akir Bor Middle East Technical University Trkiye
16:00-16:15 Dner Disk Atomizasyonu Yntemiyle Hzl Katlatrlm AISI 304 Paslanmaz elik Alam Tozu retiminin ncelenmesi Investigation of Producing Rapidly Solidied AISI 304 Stainless Steel Powder by Rotating Disc Atomization
Sultan ztrk, Gnl Usta, Blent ztrk Karadeniz Technical University Trkiye Notes / Notlar

WELDING METALLURGY KAYNAK METALURJS

Session Chairman / Oturum Bakan: CANER BATIGN
16:30-16:45 Lazer Kaynakl Haynes 188 Sper Alamnn Karakterizasyonu Characterization of Laser Welded Haynes 188 Superalloy
Akn Odaba, Necip nl, Gltekin Gller, E. Sabri Kayal, M. Niyazi Eruslu Istanbul Technical University Trkiye
16:45-17:00 Doal Gaz ve Petrol Boru Hatt Kaynaklarnn Sulu H2S eren Asidik Ortamlardaki Davranlar Behaviors of Oil and Gas Pipeline Steels in Wet H2S Containing Environment
A. Kadir Uysal, Nurhan Cansever mran elik Boru Sanayii A.., Yldz Technical University Trkiye
17:00-17:15 The Effect of Different Filler Metals on the Mechanical Properties and Corrosion Resistance of Welded 316L Stainless Steel
Mohammad Esmailian, Morteza Esmaiely Saveh Azad university, Iranian Research Organization for Science and Technology Iran
17:15-17:30 Metallurgical Changes in the Forge Weld Area During High-Frequency Electric Resistance Welding
Rrahim Sali Maksuti, Hamit Mehmeti , Mursel Rama, Nexhat Cerkini University of Pristina, State University of Tetova, Pipe Factory Ferizaj Kosova
17:30-17:45 Investigation on the Arc Thermal Efciency of the Gas Tungsten Arc Welding
Mammad Nasiri, Alireza Ebrahimi Sahand Technical University Iran
Notes / Notlar

METALLIC MATERIALS 1 METALK MALZEMELER 1

Session Chairman / Oturum Bakan: AHMET TOPUZ
10:00-10:15 Sementasyon Yaplm Dili Malzemesinde Hasar Analizi Failure Analysis of Cementation Treated Gear
adi Karagz, Fulya Kahrman, Funda Gl Demircan Kocaeli University Trkiye
10:15-10:30 Anma Dayanm iin statistiki Model A Statistical Model for Wear Resistance
Mehmet imir, Burhan Seluk, Sertel Dikmen, Nevzat Aslan Cumhuriyet University Trkiye
10:30-10:45 Farkl Yalandrma Prosedrlerinin 7033 Alminyum Alamnn Mikroyap, Sertlik ve Anma Davranlar zerindeki Etkisi Effect of Different Aging Procedures on Microtructure, Hardness and Wear Behaviour of 7033 Aluminum Alloy
Muzaffer Zeren, Erdem Karakulak, Onur Birbaar Kocaeli University, Assan Alminyum Sanayi A.. Trkiye
10:45-11:00 Effect of the Strain-Hardening on the Wear and Corrosion Behaviour of a Fe-Mn-Al Alloy
Frederico Augusto Pires Fernandes, Stenio Cristaldo Heck, George E. Totten, C.A.Picon, Luiz Carlos Casteletti University of Sao Paulo, Texas A&M University, Engineering School of Ilha Solteria Brazil
Notes / Notlar


Session Chairman / Oturum Bakan: ERDOAN TEKN
11:15-11:45 Study of Precipitation in Next Generation HSLA Steels
Peter Hodgson Deakin University Australia (Invited Lecturer / Davetli Konumac)
11:45-12:00 Microstructural Aspect of Retained Austenite in Super-Bainite Base Transformation Induced Plasticity (SB-TRIP) Steels
Chan Gyung Park, Jae-Bok Seol, Young-Rock Lim POSTECH, POSCO South Korea
12:00-12:15 Evaluation of Tensile Properties of a C-Mn-Si TRIP Steel in Comparison with Dual-Phase Steel
Masoome Naghizadeh, Asieh Avazpoor, Mohammad Mazinani Ferdowsi University of Mashad Iran
12:15-12:30 Liquid Zinc Embrittlement of TWIP Steel

Coline Beal,, Xavier Kleber, Damien Fabregue, Mohamed Bouzekri INSA-Lyon, ArcelorMittal Research France
Notes / Notlar


Session Chairman / Oturum Bakan: KAZIM TUR
13:30-13:45 An Overview of the Effects of Calcium and Strontium on the Properties of Aluminum and Magnesium Alloys
Mihriban Pekgleryz McGill University Canada
13:45-14:00 Microstructure and Texture of AZ31 Magnesium Alloy Sheet Produced by Twin Roll
Mohsen Masoumi, Faramarz Zarandi, Mihriban Pekguleryuz McGill University Canada
14:00-14:15 Effect of Manganese Alloying on the Creep Behavior of Magnesium

Mert elikin, Mihriban Pekgleryz McGill University Canada
14:15-14:30 Texture-Related Distributions of Elastic Properties in Thin Rolled Sheets

Jrn Ltjens, Pavel Bobrov, Martin Dr.-Ing Hunkel Stiftung Institut fr Werkstofftechnik Bremen, Universitat Bremen Germany
14:30-14:45 Mechanisms of Static Globularization of Two-Phase Titanium Alloy

Chan Hee Park, Kyung-Tae Park, Young-I Son, Young Won Chang, Chong Soo Lee Pohang University, Hanbat National University, Technology Research Center of Agency for Defense Development South Korea
Notes / Notlar

NON-FERROUS METALLURGY / DEMR DII METALLER METALURJS

Session Chairman / Oturum Bakan: CNEYT ARSLAN
15:00-15:15 Chemical and Electrochemical Behavior of Different Additives in Copper Electrorening
Michael Stelter, Harmut Bombach, Vasily Nakostenko Technische Universitaet Bergakademie Freiberg, Institute for Nonferrous Metallurgy and Purest Materials Germany
15:15-15:30 Effects of Rapid Chlorine Removal on the Electrolytic Magnesium Production Hzl Klor Uzaklatrmasnn Elektrolitik Magnezyum retimi zerine Etkileri
Gkhan Demirci, shak Karakaya Middle East Technical University Trkiye
15:30-15:45 The Effect of Ultrasound Irradiation on the Morphology of Ni Powder Synthesized by Electrodeposition
Mahdiyar Hoobakht, Alireza Zakeri, Alireza Shahidi Iran University, Sharif University of Technology Iran
15:45-16:00 High Pressure Acid Leaching of a Turkish Laterite Ore Lateritik Trk Cevherinin Yksek Basn Altnda Asit Lii
erif Kaya, Yavuz A. Topkaya Middle East Technical University Trkiye
16:00-16:15 Kalsiyum Molibdatn Okzalik Asit zeltilerinde znrletirilmesi Dissolution of Calcium Molybdate in Oxalic Acid Solutions
Sedat lhan, Ahmet Orkun Kalpakl, Cem Kahruman, brahim Yusufolu Istanbul University Trkiye
Notes / Notlar

RECOVERY AND ENVIRONMENTAL PRECAUTIONS IN METALLURGY / GER KAZANIM VE METALURJDE EVRE KORUYUCU NLEMLER Session Chairman / Oturum Bakan: SMAL DUMAN
16:30-16:45 Chloride Removal from the Secoundary Source of Zinc by Pyroand Hydro-Metallurgical Treatments
Naseh Dakhili, H. Razavizadeh, S.H. Seyedein, M.T. Salehi Iran University of Science and Technology Iran
16:45-17:00 Solid Waste Utilisation An Initiative at Bhilai Steel Plant, Sail,India

S. V. Nandanwar, S. Shekar Steel Authority of India Ltd. India
17:00-17:15 Impact of Ferro-Nickel Slag in Improve the Mechanical-Physical Properties of Consumable Layer of Asphalt Concrete
Izet Ibrahim, Musa Rizaj, Nurten Deva, Agim Ramadani Korporata Energjetike e Kosova, University of Prishtina, Xella-Kosova L.L.C. Kosova
17:15-17:30 Geri Dntrlm Lastik Atklarnn Bitml Scak Karmlarn Performansna Etkisinin ncelenmesi Effects of Recyled Waste Tires in Hot Bituminous Mixtures
Esin Gnay, brahim Snmez, Aydn Topu, Mustafa Kara, Seyit Ali Yldrm, Bayise Kavakl SFALT A.., TBTAK Marmara Research Center Trkiye
17:30-17:45 Combined Effect of Water Contamination with Cobalt and Nickel on Metabolism of Albino Wistar Rats
Zine Kechrid, Faouzi Dahdouh University of Annaba Algeria
Notes / Notlar

HALL 3 / SALON HEYBEL

Session Chairman / Oturum Bakan: C. HAKAN GR
15:00-15:15 Dislocation-Kinetic Approach to the Analysis of Deformation Mechanisms of Metals and Alloys
Igor V. Alexandrov, Rosa Chembarisova Ufa State Aviation Technical University Russia
15:15-15:30 Analysis of Strain Rate Sensitivity of Nanostructured Materials

Hyoung Seop Kim Pohang University of Science and Technology South Korea
15:30-15:45 Application of Equal-Channel Angular Extrusion to Some BCC, FCC and HCP Materials: Microstructure-Property Relationship E Kanall Asal Ekstrzyon Ynetiminin Baz HMK, YMK ve SDH Yapl Malzemelere Uygulanmas: Mikroyap-Mekanik zellik likisi
Genaa Prek, Onur Saray, brahim Karaman, Tevk Kkmerolu Karadeniz Technical University, Texas A&M University Trkiye
15:45-16:00 Investigation of Texture of Copper Processed by New Route of ECAP

Farideh Salimyanfard, Mohammad Reza Toroghinejad, Fakhredin Ashrazadeh Isfahan University of Technology Iran
16:00-16:15 6061 Al-Alam Plakalarn Deiik Kanall Asal Presleme Yntemiyle Ar Plastik Deformasyonu Severe Plastic Deformation of Al-6061 Sheets by Dissimilar Channel Angular Pressing
Evren Tan, Alp Aykut Kibar, C. Hakan Gr Middle East Technical University, TBTAK Trkiye
Notes / Notlar

HALL 3 / SALON HEYBEL

Session Chairman / Oturum Bakan: BURAK ZKAL
16:30-16:45 Characterization of Mechanically Alloyed Fe-Mn-Si-Cr-Ni Shape Memory Alloys - Hot Rolling Effects
Vasile Dia, Umut Syler, Bogdan Pricop, Burak zkal, Leandru-Gheorghe Bujoreanu Arceleor Mittal Tubular Products Iasi, Istanbul Technical University, The Gheorghe Asachi Technical University from Iasi Romania, Turkey
16:45-17:00 Shape Memory Effect in Cu-Al-Fe Alloys

T.N. Raju, Vedamanickam Sampath Indian Inst. Of Tech. Madras India
17:00-17:15 Biyel Kolu Yar Scak Dvme Projesi Warm Forging of a Connecting Rod
Grbz Gzey, Achim Schott OMTA A.., IPH Hannover Trkiye, Germany
17:15-17:30 Effects of Pre-Straining and Tempering Treatment on the Yield Strength of Fe-12Mn Steel
Young Won Chang, Min Soo Kim Pohang University of Science and Technology South Korea
17:30-17:45 Effect of Deformation Strain Rate on Continuous Dynamic Recrystallization

Beitallah Eghbali Sahand Technical University Iran
Notes / Notlar

IRON AND STEEL METALLURGY 1 DEMR-ELK METALURJS 1

Session Chairman / Oturum Bakan: ABD AYDODU
10:00-10:15 Ceramic Sprayed Roll Technique CSRT and Solid Shell Resistance of Inner Quality of Continuously Cast Steel Slabs
Mostafa Omar El-Bealy Ain Shams University Egypt
10:15-10:30 Effect of Top Layer, Nozzle Arrangement and Gas Flow Rate on Mixing Time in Agitated Ladles by Bottom Gas Injection
A.N. Conejo, S. Kitamura, N. Maruoka, J.S. Kim Morelia Technological Institute, IMRAM-Tohoku University Mexico, Japan
10:30-10:45 Thermodynamic Modeling of Deoxidation Products and Inclusion Chemistry in Mn/Si Killed Tire-Cord Steel
Akula Durgavara Prasad, Sankara Raman Sankaranarayanan National Institute of Technology Tiruchirappalli India
10:45-11:00 Numerical Modeling of Thermal and Kinetic Phenomena in Reactive Systems Reaktif Sistemlerde Isl ve Kinetik Olaylarn Saysal Modellenmesi
Mahmut Nedim Cnbz, ner olak, Abdi Aydodu Hacettepe University, MTA Trkiye
Notes / Notlar

IRON AND STEEL METALLURGY 2 DEMR-ELK METALURJS 2

Session Chairman / Oturum Bakan: UUR YILMAZ
11:15-11:45 Trkiyede ve Dnyada Demir elik Sektrnn Durumu A Review of Iron & Steel Industry: Turkey and the World
Suhat Korkmaz Tosyal Holding Trkiye (Invited Lecturer / Davetli Konumac)
11:45-12:00 Yksek Frn Dkm Kanallar ve Beik Olukta Kullanlan Kanal Dvme amuru ile Kanal Betonu Arasndaki Anma Mekanizmasndaki Deikenler Abrasion Reasion Variation for Resin Bonded Ramming and Low Cement Castable in the Application of Blast Furnace Main and Tilting Runner Workingline
Murat Can, Muhammet Balc SDEMR Iskenderun Iron & Steel Integrated Plant Trkiye
12:00-12:15 Srekli Dkm Tufalinden Karbotermik ndirgemeyle Dorudan ndirgenmi Demir retimi Production of Direct Reduced Iron from Continuous Casting Mill Scale by Carbothermic Reduction
Fahri Cihan Demirci, Onuralp Ycel Istanbul Technical University Trkiye
12:15-12:30 Yksek Frnda Kullanlan Kok ve Hammadde Kalitesinin Frn Gaz Geirgenliine ve Yakt Tketimine Etkisi Effect of Coke and Raw Material Quality on Blast Furnace Permeability and Total Fuel Consumption
Murat Can SDEMR Iskenderun Iron & Steel Integrated Plant Trkiye
12:30-12:50 Development and Application of Mould Non-Sinusoidal Oscillation System

Zhiheng Tian Ramon Science & Technology Co., Ltd. China (Commercial Paper / Ticari Bildiri)

HEAT TREATMENT ISIL LEM

Session Chairman / Oturum Bakan: NDER YCEL
13:30-14:00 Heat Treatment: State-Of-The Art, Future Trends
George E. Totten Texas A&M University USA (Invited Lecturer / Davetli Konumac)
14:00-14:15 Determination of Heat Transfer Coefcient during High-Speed Water Quenching

Thomas Lbben, Jochen Rath, Franz Hoffmann, Udo Fritsching, Hans-Werner Zoch IWT Bremen Germany
14:15-14:30 Mathematical Modelling and Computer Simulation of Quenched and Tempered Steel Properties
Bozo Smoljan, Dario Iljkc, Furio Traven University of Rijeka Croatia
14:30-14:45 Rapid Nitriding of Titanium Alloy with Atmosphere Control

Masahiro Okumiya, Yoshiki Tsunekawa, Masatoshi Kato Toyota Technological Institute, Graduate Student of Toyota Technological Institute Japan
Notes / Notlar

SURFACE TREATMENT 1 YZEY LEMLER 1

Session Chairman / Oturum Bakan: KRAT KAZMANLI
15:00-15:15 Chromium Carbide Films Obtained by Conversion Treatment of Chromium Deposited on Carburizing Steel Substrates
Younes Benarioua University of Msila Algeria
15:15-15:30 Oxidation Kinetics of Pack Borided AISI 1060 and H13 Steels
Stenio Cristaldo Heck, Frederico Augusto Pires Fernandes, George E. Totten, Luiz Carlos Casteletti University of Sao Paulo, Texas A&M University Brazil, USA
15:30-15:45 Production and Investigation of Al/SiC(Ni)p Composites

Judit Pazman, Viktor Madai, Jozsef Toth, Zoltan Gacsi University of Miskolc, Institute of Nuclear Research Hungary
15:45-16:00 Substrate Effect on Diamond Films Deposited by Hot Filament Chemical Vapour Deposition
Mubarak Ali,, Semih ncel, Mustafa rgen Istanbul Technical University, Comsats Institute of Information Technology Pakistan, Trkiye
16:00-16:15 Processing and Characterization of Plasma-Sprayed Ceria and Ytria Stabilized Zirconia TBCs Plazma Sprey Prosesi ile retilmi CeO2 ve Y2O3 ile Stabilize Bariyer Kaplamalarn retimi ve Karakterizasyonu
Ekrem Altuncu, Fatih stel Kocaeli University, Sakarya University Trkiye
Notes / Notlar

SURFACE TREATMENT 2 YZEY LEMLER 2

Session Chairman / Oturum Bakan: FATH STEL
16:30-16:45 Plain and Fretting Fatigue Behaviour of Ti6Al4V Alloy Coated with TiAlN Thin Film: Experimental and Theoretical Study TiAlN nce Film ile Kaplanm Ti6Al4V Alamnn Basit ve Srtnme Koullarndaki Anma Davran: Deneysel ve Teorik alma
Akgn Alsaran, Fatih Yldz, Fatih Yetim Atatrk University Trkiye
16:45-17:00 Fiziksel Buhar Biriktirme (FBB) Yntemiyle Kaplanm Takm eliinin Isl Yorulma ve Anma Performans Testleri Thermal Fatigue and Wear Testing of PVD Coated Hot Work Tool Steel under Steel Thixoforming Conditions
Duygu ler, Ycel Birol, Mustafa rgen TBTAK Marmara Research Center, Istanbul Technical University Trkiye
17:00-17:15 Kriyojenik lem Grm Souk Takm eliklerinin Karakterizasyonu Characterization of Cryogenically Heat Treated Cold-Work Tool Steels
F. Koray, brahim Altnsoy, Aziz Hatman, Mediha pek, Sakin Zeytin, Cuma Bindal Sakarya University, Assab elik ve Isl lem A.. Trkiye
17:15-17:30 Karbrlenmi, Nitrrlenmis, Nitro-Karbrlenmi ve Borlanm Dk Karbonlu eliklerin Kuru Srtnme artlar Altnda Srtnme ve Anma Direnlerinin Karlatrlmas Comparison of Friction and Wear Resistance of Low Carbon Steels Subjected to Carburizing, Nitrocarburizing and Boriding Treatments under Dry Sliding Conditions
Gldem Kartal, Christine Matta, Levent Erylmaz, Servet Timur, Ali Erdemir Istanbul Technical University, Argonne National Laboratory Trkiye
17:30-17:45 AISI 5140 eliklerinin Pulse Plazma Teknolojisi ile Yzey Modikasyonu ve Karakterizasyonu Structural Characterization of AISI 5140 Steel Modied by a Pulse-Plasma Technique
Aysun Ayday, S. Can Kurnaz, Mehmet Durman Sakarya University Trkiye

CASTING 1 DKM 1
Session Chairman / Oturum Bakan: TUNCAY ULAN
10:00-10:15 Rotary Degassing and Porosity Phenomena in Aluminium Castings
Derya Dispinar, Shahid Akhtar, Arne Nordmark, Marisa Di Sabatino, Lars Arnberg SINTEF Materials and Chemistry, NTNU Norway
10:15-10:30 A356 Aluminium Alloy Modied by Ce Addition

El-Zahraa M. El-Baradie, Salah S. Ezz CMRDI, Cario University Egypt
10:30-10:45 Phase Field Simulation of Dendritic Solidication of a Binary Alloy in Presense of Melt Convection
Hadi Barati, M. Reza Aboutalebi, Saeed Shabestari Iran University of Science and Technology Iran
10:45-11:00 Development of an Environmentally Sustainable Foundry Sand Binder

Thang Nguyen, John Carrig, Danny Moran, Xiaoqing Zhang, Sarah Khor CAST Cooperative Research Centre, CSIRO Proses Science and Engineering, CSIRO Materials Science and Engineering Australia
Notes / Notlar

CASTING 2 DKM 2
Session Chairman / Oturum Bakan: AL KALKANLI
11:15-11:30 Ingate Velocity of Castings Produced in Air Impulse Molding System
Sahar Ghafurian, N. Najmoddin, S. M. A. Boutorabi Iran University of Science and Technology Iran
11:30-11:45 Kresel Gratli Dkme Demir Dkmlerinde Modl ve Kimyasal Bileimin Katlama ve Hacimsel Deiime Etkileri The Effect of Casting Modulus and Chemical Analysis on the Solidication and Chemical Analysis of Ductile Iron Castings
brahim Arda, Murat olak, Seluk irin, Ramazan Kaykc Anadolu Dkm A., Sakarya University, DTS Teknoloji Eitim Danmanlk Trkiye
11:45-12:00 Study and Modication of Naturally- Pressurized Running System:The Effect of Ceramic Filters
Hatef Hashemi, Ramin Raeiszadeh, Minoosh Khodadad MSc in Metallurgy and Materials, University of Kerman Iran
12:00-12:15 Using Flow Simulation to Cure Production Problems

Lawrence E. Smiley, David Schmidt Finite Solutions Inc USA
12:15-12:30 Effects of the Rotation Velocity and Mold Pre-Heating Temperature on the Mechanical Properties of A413 Alloy by Vertical Centrifugal Casting
A.R. Modaresi, M.Pourabdollah, J.Naeeni Islamic Azad University Iran Notes / Notlar

CERAMICS, GLASSES, REFRACTORIES 1/ SERAMK, CAM, REFRAKTER MALZEMELER 1

Session Chairman / Oturum Bakan: BEKR KARASU
13:30-13:45 Talk lavesinin Porselen Karo rn zelliklerine Etkisi The Effect of Addition of Talc on Porcelain Tile Product Properties
Zahide Bayer ztrk, Nuran Ay Anadolu University Trkiye
13:45-14:00 Elektrik Akm Destekli Sinterleme (SPS) Yntemi ile retilmi SiAlON Seramiklerinde Mikroyapnn Tribolojik zelliklere Etkisi The Effect of Microstructure on Tribological Properties of SiAlON Ceramics Sintered by Spark Plasma Sintering (SPS) Technique
Bilge Yaman, Hasan Mandal Eskiehir Osmangazi University, Anadolu University Trkiye
14:00-14:15 Bor Karbr-Titanyum Borr Seramiklerinin Spark Plazma Sinterleme (SPS) Metoduyla retimi ve Karakterizasyonu Production and Characterization of Boron Carbide-Titanium Diboride Ceramics by Spark Plasma Sintering Method
Berkay Uygun, Gltekin Gller, Onuralp Ycel, Filiz ahin Istanbul Technical University Trkiye
14:15-14:30 Effects of Compositional Design on the Microstructural Properties and Stain Resistance of Polished Porcelain Tile Bodies Kimyasal Kompozisyon Tasarmnn Parlatlm Porselen Yaplarn yap zelliklerine ve Lekelenme Direncine Olan Etkileri
Neslihan Tams,, Ender Suvac, Hidayet zdemir Anadolu University, Vitra Tiles Inc. Trkiye
14:30-14:45 A Proposed Mechanism for Fatigue of PZT Thin Films

Ebru Menur Alkoy, Tadashi Shiosaki Maltepe University, Nara Institute of Science and Technology Japan, Trkiye
Notes / Notlar

CERAMICS, GLASSES, REFRACTORIES 2 / SERAMK, CAM, REFRAKTER MALZEMELER 2

Session Chairman / Oturum Bakan: ENDER SUVACI
15:00-15:15 Piezoelektrik Seramiklerin Alginate Jellemesi Yntemiyle Fiber Formunda ekillendirilmesi Preperation of Piezoelectric Ceramics in Fiber Form using Alginate Gelation Method
Sedat Alkoy, Emre Tekel, A. Serkan Tekda Gebze High Technology Institute Trkiye
15:15-15:30 The Effect of Boron Oxide Content on the Phosphorescence Mechanism of Strontium Aluminate Phosphors Bor-Oksit Miktarnn Stronsiyum Alminat Fosforlarn Fosforesan (Is Vermeden Ima) Mekanizmasna Etkisi
Selvin Yeilay Kaya, Bekir Karasu, Erkul Karacaolu Anadolu University Trkiye
15:30-15:45 Sr Oluumu ve Geliiminin Isl Mikroskop ile ncelenmesi Investigation of Glaze Formation and Development by using Heating Microscope
Yasemin Demirci, Volkan Gnay TBTAK Marmara Research Center Trkiye
15:45-16:00 Mekanik Bilyal tmeyle Yksek Etkinlikte Fotokatalitik TiO2 Tozunun Hazrlanmas Production of Highly Efcient Photocatalytic TiO2 by Mechanical Ball Milling
Baak Aysn, Esra orapc, Jongee Park, Abdullah ztrk, Muharrem Timuin Middle East Technical University, Atlm University Trkiye
16:00-16:15 Preparation of Hydroxyapatite Microtube using Hydrothermal Process in the Presence of Titania
Hiroko Takahashi, Masanobu Kamitakahara, Setuaki Murakami, Noriaki Watanabe, Koji Loku Tohoku University, National Institution of Advance Industrial Science and Technology Japan
Notes / Notlar

CERAMICS, GLASSES, REFRACTORIES 3/ SERAMK, CAM, REFRAKTER MALZEMELER 3

Session Chairman / Oturum Bakan: ABDULLAH ZTRK
16:30-16:45 TeO2-WO3 Sisteminde Karakterizasyon almalar Characterization Studies in the TeO2-WO3 System
Miray elikbilek, Ali Erin Ersundu, Nuri Solak, Sheyla Aydn Istanbul Technical University Trkiye
16:45-17:00 Uucu Kllerin Cam Kpk retiminde Deerlendirilmesi The Usability of Fly Ash in Glass Foam Production
Anl ahin, Ediz Ercenk, enol Ylmaz, Volkan Gnay Sakarya University, TBTAK Marmara Research Center Trkiye
17:00-17:15 MgO-ZrO2 Dkm Yolluklarnn retim Parametrelerinin ncelenmesi Investigation of MgO-ZrO2 Foundry Nozzles Production Parameters
Yasemin Demirci, Gzin Mge Lle, Hasan Balama, Volkan Gnay TBTAK Marmara Research Center, Anadolu Mhendislik Trkiye
17:15-17:30 MgO-C Tula Oksidasyonunu nleyici Kaplama Uygulamas Anti-Oxidation Coating of MgO-C Brick
Ziya Aslanolu, etin Balan Sperate Atee Mukavim Malzeme Sanayi A.. Trkiye
17:30-17:45 Interactions between Sulphurdioxide Bearing Gases and Magnesite Based Refractories
N. Ziyanda Fotoyi, Hurman Rauf Eric University of the Witwatersrand South Africa
Notes / Notlar
POSTER SESSION / POSTER SUNUMLARI

NANOMATERIALS / NANO MALZEMELER
NM-01
Karbon Kaplanm SiO2de Karbotermal Redksiyonla Nanokristal SiC Toz / Whisker Sentezi Synthesis of Nanocrystalline SiC Powders / Whisker by Carbothermal Reduction of Carbon Coated SiO2
enol etinkaya, erafettin Erolu Istanbul University Trkiye
NM-02
Gm Nanotellerin retimi ve retim Parametrelerinin Belirlenmesi Synthesis of Silver Nanowires and Determination of Process Parameters
ahin Cokun, H. Emrah nalan Middle East Technical University Trkiye
NM-03
A Novel Approach to Produce Ultrane Boric Acid Particles ok Kk Borik Asit Paracklarnn retilmesi iin Yeni Bir Yaklam
Mehmet kbal Ik, zgenur Kahveciolu, Servet Timur Istanbul Technical University Trkiye
NM-04
Nanoteknoloji Nedir? What is Nanotechnology?

Yusuf Ziya Kayr, Etem Gndz Bal KOSGEB Sincan Trkiye
NM-05
Effect of Synthesis Methods on Thermoelectric Properties of Ca3Co4O9 Nanopowders Sentez Yntemlerinin Ca3Co4O9 Nanotozlarnn Termoelektrik zellikleri zerindeki Etkisi
Murat Gne, A. Macit zenba Middle East Technical University Trkiye
NM-06
Production of ITO Nanoparticles, Nanowires and Thin Films for Dye-Sensitized Solar Cells Boya ile Uyarlm Gne Pilleri in ITO Nanoparack, Nanotel ve nce Film retimi
Halil brahim Yavuz, A. Macit zenba Middle East Technical University Trkiye
NM-07
inko Oksit Nanotellerin Hidrotermal Yntemlerle retilmesi ve retim Parametrelerinin Belirlenmesi Synthesis of Zinc Oxide Nanowires by Hydrothermal Method and Determination of Process Parameters
Ayegl Afal, Mehmet Can Akgn, H. Emrah nalan Middle East Technical University Trkiye

NM-08
Silisyum Nanotellerin retimi ve retim Parametrelerinin Belirlenmesi Fabrication of Silicon Nanowires and Determination of the Process Parameters
Bar zdemir, Mustafa Kulakc, Rait Turan, H. Emrah nalan Middle East Technical University Trkiye
NM-09
Ultrasonik Destekli Sol-Jel Yntemiyle retilen CuO Nanoyaplarnda Kristal Bymesinin ncelenmesi Investigation of Crystal Growth on CuO Nanostructures Produced by Ultrasonic Assisted Sol-Gel Process
Burak Ebin, Sebahattin Grmen, Cneyt Arslan Istanbul Technical University Trkiye
NM-10
NaA Zeolite Synthesized in Fluidized Bed Reactor

Irena G. Markovska, Dimitar Georgiev, Bogdan Bogdanov, Yancho Hristov, Ivan Petrov Assen Zlatarov University Bulgaria
COMPOSITE MATERIALS / KOMPOZT MALZEMELER

CM-01
Magnezyum Silisit Partikl Takviyeli Aluminyum-Magnezyum-Silisyum Matrisli Kompozitlerin Mekanik zelliklerine ve Korozyon Davranna Kurunun Etkisinin ncelenmesi The Effect of Lead on the Mechanical Properties of Aluminum-MagnesiumSilicon Matrix Composite Reinforced with Magnesium Silicide Particulate
Hayrettin Ahlatc, Aydn Durmaz, Ali Palta, Mustafa Acarer Karabk University Trkiye
CM-02
Yer Karosu Atklarnn Agrega Olarak Betonda Kullanlabilirlii Usability of Floor Tile Waste as Aggregate in Concrete
Yasemin Tabak, Mustafa Kara, Esin Gnay, enol Ylmaz TBTAK Marmara Research Center, Sakarya University Trkiye
CM-03
Metal Matrix Composite: Stretching to the Limit for 2024 series

Rupa Dasgupta, Amol Kumar Jha, Satyabrata Das Advanced Material and Processes Research Institute India
CM-04
Mechanical Response and Environmental Ageing of Fabric Composite

Abdelghani Naceri Msila University Algeria
CM-05
Structure of Hard Composite Layers Deposited by Plasma ARC

Nicolaie Jumate, Ioan Vida - Simiti Technical University of Cluj-Napoca Romania

CM-06
Synthesis of Nanocrystalline Al2O3 Powder via Mechanical Activation and Investigation of the Mechanical Behavior of Nano-Composite Al-Al2O3
Mohsen Hosseinzadeh, Omid Mirzaee, Mansour Razavi, Peyman Saidi Semnan University, Materials and Energy Research Center, Ferdowsi University Iran
CM-07
Effects of Ceramic Additives on Mechanical Properties of Alumina Matrix Composites

Viktor Orosz, A. Laszlo Gmze University of Miskolc Hungary
CM-08
The Effect of Phosphorous on the Microstructure and Tensile Properties of Cast in-Situ Al-15%Mg2Si Metal Matrix Composite
Noushin Nasiri, Masud Emamy Tehran University Iran
CM-09
Effect of Fibre Geometry on Toughness Indices of Steel Fibre Reinforced Refractory Concrete
Miloud Beddar Msila University Algeria
CM-10
Advances in the Fabrication of Al Alloy Silicon Carbide Composite

Rajesh Kumar Bhushan, Sudhir Kumar, S. Das Shri Mata Vaishno Devi Univesity, Noida Institute of Engineering and Technology Greater Noida, Advanced Materials and Processes Research Institute India
CM-11
Effect of Hot Rolling Process on Microstructural and Hardness Properties of Al-SiC Composites
Akbar Heidarpour, Ali Shafyei Isfahan University of Technology Iran
CM-12
Effects of Al2O3 Nano-particle on the Solid Solubility Extension of 7wt.%Cr in Cu during Mechanical Alloying
Saeed Sheibani, Abolghasem Ataie, Saeed Heshmati Manesh University of Tehran Iran
CM-13
Fabrication of Al/SiC Nano-Composite Powders VIA-IN Powder Metallurgy (IPM) Method

M. Moazami Goudarzi, F. Akhlaghi Islamic Azad University, University of Tehran Iran

MATERIALS CHARACTERIZATION / MALZEME KARAKTERZASYONU
MC-01
Proses artlarnn Etilen-Vinil-Asetat (EVA) Polimerinin Kpk Oluumuna Etkilerinin ncelenmesi The Effect of Process Parameters on the Formation of Polymer Foam in the Ethylene-Vinyl-Acetate (EVA)
Hakan Yetgin, Hseyin nal Sakarya University Trkiye
MC-02
Gadolinyum Asetat Hidratn Termal Bozunma Davran Thermal Decomposition Behavior of Gadolonyum Acetate Hydrate
Aliye Arabac, Sebahattin Krtay, Melek Cumbul Altay Istanbul University Trkiye
MC-03
Amonyum Heptamolibdat Tetrahidratn Nonizotermal Koullarda Isl Bozunma Admlarnn Kinetii Kinetics of Thermal Decomposition Steps of Ammonium Heptamolybdate Tetrahydrate under Non-isothermal Conditions
Aliye Arabac, Kemal Can Kevser, brahim Yusufolu Istanbul University Trkiye
MC-04
Modiye Edilmi Sol-Jel Prosesiyle Stronsiyum Alminat Esasl Fosforesans Malzeme Sentezi Synthesis of Strontium Aluminates Phosphorescence Material by Modied Sol-Gel Process
Cem Karaka, M.Okan Arkan, Nuri Solak, Sheyla Aydn Istanbul Technical University Trkiye
MC-05
Dey Srekli Dkm Yntemi ile retilen Billetlerde Kullanlan AlTiB Tane ekirdekleyicilerin Kyaslanmas Comparison of the AlTiB Grain Renement in the Billets that Produced by Direct Chill Casting
Koray Turbalolu, Yavuz Sun Atlas Alminyum, Karabk University Trkiye
MC-06
Samaryum Katkl Seryum Oksitin Termal Bozunma Davrannn ncelenmesi The Investigation of the Thermal Decomposition Behavior of Samarium-Doped Ceria
Aliye Arabac, Nuri Solak Istanbul University, Istanbul Technical University Trkiye
MC-07
Liner Materials used in Shaped Charge and Explosively Formed Penetrator Applications ukur mla ve Patlama ekillendirmeli Delici Uygulamalarnda Kullanlan Astar Malzemeleri
M. Kaan Pehlivanolu TBTAK SAGE Trkiye

MC-08
Uaklarda Grlen Korozyonun Girdap Akmlar Teknii ile Tespiti Determination of Corrosion with Eddy Current Techniques in Aircraft Structure
zgr Ergin Korkmaz, Melih Onursal, Ergn Keleolu, Adem Bakkalolu Mytechnic Aircraft Mro Services, Yldz Technical University Trkiye
MC-09
Girdap (EDDY) Akmlar ile Elektriksel letkenlik Tayini ve letkenlii Etkileyen Faktrler Determinaton of Electrical Conductivity with Eddy Current and the Factors Affecting Conductivity
Melih Onursal, zgr Ergin Korkmaz, Adem Bakkalolu, Ergn Keleolu Mytechnic Aircraft Mro Services, Yldz Technical University Trkiye
MC-10
Design of a Testing Machine for the Thermo-Mechanical Characterization of TiNi Shape Memory Alloys TiNi ekil Bellekli Alamlarn Termo-Mekanik Karakterizasyonunda Kullanlabilecek Bir Test Cihaznn Tasarm
Fatih Yaar, M. Kaan Pehlivanolu, A. akir Bor TBTAK SAGE, Middle East Technical University Trkiye
MC-11
Bilyeli Dvme Uygulanm elik Paralarda Yzey Kalnt Gerilmelerin Mikro-Manyetik Yntemle Tahribatsz Olarak llmesi Non-Destructive Measurement of Residual Stresses in Shot-Peened Components by Micro-Magnetic Method
Serdar Sava, brahim am, C. Hakan Gr Marmara Teknoloji Merkezi, Middle East Technical University Trkiye
MC-12
Rietveld Metoduyla Bhmit Faz Geilerinin Kantitatif Olarak Belirlenmesi Quantitative Determination of Boehmite Phase Transitions by Rietveld Method
Esin Gnay, Yusuf ztrk, Meryem Sargzel, Yasemin Demirci TBTAK Marmara Research Center Trkiye
MC-13
Cam Yzeyindeki Krom nce Filminin X-In Difraksiyonu ile Reektivite Analizi Reectivity Analysis of Chromium Thin Film on the Surface of Glass by X-Ray Diffraction
Yasemin Demirci, Yusuf ztrk, Meryem Sargzel, Esin Gnay TBTAK Marmara Research Center Trkiye
MC-14
X-In Difraksiyonu ile Tungsten Malzemede Kalnt Gerilmesi lm Residual Stress Measurement in Wolfram Material by X-Ray Diffraction
Meryem Sargzel, Yusuf ztrk, Yasemin Demirci, Esin Gnay TBTAK Marmara Research Center Trkiye

MC-15
X-In Difraksiyonu ile Haddelenmi Bakr Numunesine Ait Tekstr lm Texture Measurement of Rolled Copper Material by X-Ray Diffraction
Yusuf ztrk, Yasemin Demirci, Meryem Sargzel, Esin Gnay TBTAK Marmara Research Center Trkiye
MC-16
Characterization of Equal Channel Angular Pressed AISI 1020 Steels by Magnetic Barkhausen Noise Analysis
Zeliha Kara, brahim am, C.Hakan Gr, Marina Abramova, Igor Alexandrov Middle East Technical University, UFA State Aviation Technical University Russia, Trkiye
BIOMATERIALS / BYO-MALZEMELER
BM-01
Sol-Jel Yntemiyle retilmi Almina-Bovine Hidroksiapatit Kompozit Tozlarnn Karakterizasyonu Characterization of Sol-Gel Derived Alumina-Bovine Hydroxyapatite Composite Powders
Azade Yelten, Suat Ylmaz, Faik N. Oktar Istanbul University, Marmara University Trkiye
BM-02
Hidrotermal Metodlar ile Altandan Hidroksiapatit Sentezlenmesi Hydrothermal Synthesis of Hydroxyapatite from Gypsum
Onur Rauf Bingl, Caner Durucan Middle East Technical University Trkiye
BM-03
Modiye Edilmi Tkrk zeltilerinin Ortodontik Teller zerine Etkisi ve Yzey Karakterizasyonu Effect of Modied Saliva Solutions on Orthodontic Wires and Surface Characterization
H.brahim nal, Hakan Atapek, Sibel Zor Kocaeli University Trkiye
BM-04
Carbonate Hydroxyapatite Prepared by Hydrothermal Treatment of Calcium Carbonate

Woonkyoung Park, Zulhusmi bin Mohamad, Masanobu Kamitakahara, Noriaki Watanabe, C. Bulent Ustundag, Koji Loku Tohoku University, Yldz Technical University Japan, Turkey
BM-05
Synthesis of Designed Hydroxyapatite Particles using Hydrothermal Process

Masanobu Kamitakahara, Natsuko Ito, Yuki Enari, Noriaki Watanabe, Koji Loku, C. Bulent Ustundag Tohoku University, Yldz Technical University Japan

BM-06
Preparation and Characterization of Granules Composed of Rod-Shaped -Tricalcium Phosphate Particles
Ryosuke Fujii, Masanobu Kamitakahara, Noriaki Watanabe, Tohru Ikeda, Koji Loku Tohoku University, Nagasaki University Japan
BM-07
The Effect of Microwave Sintering on Bovine Bone Hydroxyapatite

Djamel Belamri, Noureddine Kerboua, Abdelhamid Harabi Mohammed Khider University, Mentouri University Algeria
POWDER METALLURGY / TOZ METALURJS

PM-01
Yksek Oranda Gzenek eren 17-4 PH Paslanmaz eliin Toz Metalurjisi Yntemi ile retimi Production of Highly Porous 17-4 PH Stainless Steel by Powder Metallurgy Method
lven Mutlu, Enver Oktay Istanbul University Trkiye
PM-02
Manyetik Nikel Demir Alamlarnn Mikrodalga Sinterleme Yntemiyle retilmesi Microwave Sintering of Magnetic Ni-Fe Alloys
Arcan F. Dericiolu, Derya Erdem Middle East Technical University Trkiye
PM-03
Elektrik Akm Destekli Sinterleme Yntemi ile retilen TiAl ntermetalik Malzemesinin Karakterizasyonu Characterization of TiAl Intermetallic Materials Produced by Electric Current Activated Sintering
Nuri Ergin, zkan zdemir Sakarya University Trkiye
PM-04
Elektrik Akm Destekli Sinterleme Yntemi ile Elde Edilen TiNi Kaplamalar TiNi Coating obtained by Electric Current Assisted Sintering
Nuri Ergin, zkan zdemir Sakarya University Trkiye
PM-05
Alminyum Paralarn Toz Enjeksiyon Kalplama Metodu ile retilmesi Production of Aluminum Parts by Powder Injection Molding
Levent Acar, H.zkan Glsoy Marmara University Trkiye

PM-06
WC-Co Esasl Sert Metallerin Toz Enjeksiyon Kalplanmas ve zelliklerinin rdelenmesi Powder Injection Molding of WC-Co Hard Metals and Investigation of Their Properties
H.zkan Glsoy, Halil . Bakan, Volkan Gnay, Murat Sert TBTAK Marmara Research Center, Nurol Teknoloji Sanayi A.. Trkiye
PM-07
Effect of Intermediate Annealing Temperature on Repressing Response to the Densication of Prealloyed Cr-Mo Steels
Amir Kalantari, Maziyar Azadbeh Sahand University of Technology Iran
PM-08
Elaboration of Iron Powder from Mill Scale

Omar Benchiheub, Said Mechachti, Salim Serrai, Mohamed Gamel Khalifa Annaba University, Tabbin Institute for Metallurgical Algeria, Egypt
PM-09
The Effects of Nickel Addition Route on Activated Sintering of Tungsten

Ahmad Ghaderi Hamidi, Hosein Arabi, Saeed Rastegari Iran University of Science and Technology Iran
WELDING METALLURGY / KAYNAK METALURJS

WM-01
Hardox 400 eliinin Bindirme ve Dolgu Kaynanda Kaynak Telinin Mikroyap ve Mekanik zelliklere Etkisi Microstucture and Mechanical Property Change of Lap and Fillet Welded Hardox 400 Stell
Nuray Bekz, Selim Yldrm Istanbul University Trkiye
WM-02
Sanal Kaynak Simlatr Tasarm Design of Virtual Welding Simulators

Cemil z, Fehim Fndk, Osman yibilgin, Uur Soy, Yaar Kyan, Soydan Sertta, Kayhan Ayar, Sadk Uslu, Yaln Yaar Sakarya University Trkiye
WM-03
Farkl Yntemlerle Kaynaklanm Ferritik eliklerde Mikroyapsal Karakterizasyon ve Mikrosertlik Deikenlii Microstructural Characterisation of Ferritic Steels Welded by Different Methods and Variation of Microhardness
eyda Polat, Hakan Atapek, Onur Birbaar Kocaeli University Trkiye
WM-04
A Bimetal Interaction for the Bearings Offshore Drilling Equipments with Seawater Environment
Tamara Radu Nicu, Anisoara Ciocan, Florentina Potecasu University Dunarea Romania

WM-05
Studies on the Butt Welding Characteristics of Double Wall PE Pipes
Bo-Young Lee, Sang-Yul Lee Korea Aerospace University South Korea
WM-06
Inuence of Heat Treatment on Brittle Fracture Welding Cords of Constructional Steels

M. Zaoui, A. Bouchoucha University Mohammed Boudiaf Msila, Mentouri University Algeria
METALLIC MATERIALS / METALK MALZEMELER

MM-01
Bakr Katksnn ve stemperleme Isl leminin GGG 50 Snf Dkme Demirin Mikroyapsna Etkisi The Effect of Copper Addition and Austempering Heat Treatment on GGG 50 Grade Cast Iron Microstructure
Sebahattin Krtay, Aliye Arabac, Berkin Kln Istanbul University Trkiye
MM-02
ntermetalik Alamlarn Yapsal Hatalarnn Monte Carlo Yntemi ile Benzetimi Monte Carlo Modeling of Structural Defects in Intermetallic Alloys
Muratahan Aykol, O. Mekhrabov Amdulla, M. Vedat Akdeniz Middle East Technical University Trkiye
MM-03
Saf Bakrn Yksek Scaklktaki Davranna Deformasyon Hz ve Scakln Etkisi The Effect of Deformation Rate and Temperature on the Behavior of Pure Copper at Elevated Temperatures
Selim Yldrm Istanbul University Trkiye
MM-04
AA6063 Alminyum Alamnda Yalandrma artlarnn Anma ve Mekanik zelliklere Etkisi The Effect of Age Hardenning on Mechanical Properties and Wear Resistance of AA6063 Aluminum Alloy
Selim Yldrm Istanbul University Trkiye
MM-05
Germanyumun Gmn Mikroyap ve Mekanik zelliklerine Etkisi Microstructure and Mechanical Properties of Ag-Ge Alloys
Nazl Akaml, Enver Oktay Golda Kuyumculuk, Istanbul University Trkiye

MM-06
Bakrn elie Kaynaklanmasnda Yzeydeki Flaks Kalntlarnn Korozif Etkilerinin ncelenmesi Investigation the Corrosive Effects of Excess Flux on the Surface while Welding Copper to Steel
Seluk Harput, Mehmet Ali Akoy, Zeynep Sirel Sarkuysan Eletrolitik Bakr Sanayii A.. Trkiye
MM-07
The Effect of Thermo-Mechanical Processing on the Shape Memory Characteristics of a Ti-50Ni Alloy Tested under Constant Strain Free Recovery Conditions Sabit Gerinim Serbest Geri Dnm Koullar Altnda Test Edilen Bir Ti-50Ni Alamnda Termo-Mekanik lemenin ekil Bellek zelliklerine Etkisi
Fatih Yaar, M.Kaan Pehlivanolu, A.akir Bor TUBTAK SAGE, Middle East Technical University Trkiye
MM-08
ekil Hafzal Ni-Ti ve Ti-Nb-Al Alamlarnn retimi Production of Ni-Ti and Ti-Nb-Al Shape Memory Alloys
Elif Zehra Erolu, Esra Dokumac, Blent nay Dokuz Eyll University Trkiye
MM-09
Alamsz Dk Karbonlu eliklerde Gerinim-Yalandrmann Darbe Tokluuna Etkileri Effects of Strain-Aging on Impact Toughness of Non-Alloyed Low Carbon Steels
Koray Yurtk, Caner Batgn, Rza Grbz Middle East Technical University Trkiye
MM-10
Yksek Krom ve Silisyumlu eliin Anma Davranna Uygulanan Ykn ve Kar Malzemenin Etkisi Effect of Applied Loads and Counterfaces on the Wear Behaviour of the Steel with High Cr and Si
Hayrettin Ahlatc, Mustafa Bakr, Orkun Tfenk, Yavuz Sun, Grkem Yargl Karabk University, As elik Dkm Trkiye
MM-11
The Effect of Thermo-Mechanical Processing on the Shape Memory Characteristics of a Ti-50Ni Alloy Tested Under Constant Stress Free Recovery Conditions Sabit Gerilim Serbest Geri Dnm Koullar Altnda Test Edilen Bir Ti-50Ni Alamnda Termo-Mekanik lemenin ekil Bellek zelliklerine Etkisi
Fatih Yaar, M. Kaan Pehlivanolu, A. akir Bor TBTAK SAGE, Middle East Technical University Trkiye
MM-12
Linyit Esasl Termik Santral Kazan Borular Performans Deerlendirmesi iin bir Test Dzeneinin Tasarm ve Denenmesi A Set-up for Testing of Boiler Tubes in Lignite Based Power Plants
Hseyin Ergn, Kadri Aydnol, Mustafa Doruk, Tayfur ztrk Middle East Technical University Trkiye

MM-13
Temperlenmi Beynitik Bir eliin Anma Davran zerine Sertlik Etkisi Effect of Hardness on Wear Behaviour of a Tempered Bainitic Steel
.Hakan Atapek, eyda Polat Kocaeli University Trkiye
MM-14
Statistical-Graphical Study of Formation of the Iron Intermetallic Phase in the Solid Iron-Liquid Aluminum Contact at the Early Stage
Alireza Shahbazi, Hamidreza Shahverdi Tarbiat Modares University Iran
MM-15
Effect of Deformation Parameters on the Ultrane Ferrite Formation Through Dynamic Strain-Induced Transformation
Beitallah Eghbali, Mehdi Shaban Sahand Technical University Iran
MM-16
Study of the Failure in Vibrating Sieve Side Plates

Minoosh Khodadad, S.R. Alah Karam, H. Hashemi Msc in Metallurgy and Material Science, University of Tehran Iran
MM-17
Simulating the Mechanical Loading State on Side Plates of Vibrating Sieves and Investigating the Causes of Failure
Minoosh Khodadad, Mohamad Habibi Parsa, Saeid Reza Allah Karam, Hatef Hashemi Msc in Metallurgy and Material Science, University of Tehran Iran
MM-18
Inuence of the Temperature and the Environment on Behavior Plastic Fatigue of an Austenitic Stainless Steel (316L)
Cherif Belamri, Saida Belhas University Hadj Lakhdar of Batna Algeria
MM-19
The Thermomecanic Treatments Effects Observed on the Relaxation Phenomena of an Aluminium Single Crystal
Cherif Belamri , Saida Belhas, Andre Riviere University Hadj Lakhdar of Batna, LMPM-ENSMA-UMR CNRS Algeria
MM-20
Inuence of Manganese and Titanium on Wear Behaviour of High Chromium Cast Iron
Khedidja Bouhamla, Ali Hadji, Hichem Maouche Iron and Steel Applied Research Unit, Annaba University Algeria
MM-21
Quantitative Examination of Ductile Fracture Behaviour of a C-Mn-Mo Dual-Phase Steel

Naseh Modghan, Fahimeh Teimoory, Mohammad Mazinani Ferdowsi University of Mashad Iran

MM-22
Study of the Thermoviscoplastic Behavior of an Alloy of Titanium of the Type TA6V
Abderrazek Darsouni, Djamel Toualbia,, Alexis Ruzinek, J. Roman Klepaczko, J.A. Rodriguez-Martinez4, E. Dossou University of Annaba, University Paul Verlaine, National Engineering School of Metz, 4 University Carlos III of Madrid Algeria
MM-23
Modeling Static Softening of Microalloyed Austenite

Bahman Mirzakhani, Jilt Sietsma, Mostafa Mansourinejad Arak University, Islamic Azad University, Delft University of Technology Iran, Netherlands, Australia
MM-24
Growth Kinetic of the Intermetallic Compound at Early Stage of Immersion of Solid Iron in Liquid Aluminum
Alireza Shahbazi, Hamidreza Shahverdi Tarbiat Modares University Iran
MM-25
Experimental Study on Ductile Fracture in Welded Joints

Zaoui Moussa, Menasri Noureddine University of Msila Algeria
MM-26
The Inuence of Aging Time on the Coarsening Kinetics of Precipitate in GTD-111 Ni-Base Superalloys
Mohammad Berahmand, Saied Abdolkarim Sajjadi Ferdowsi University of Mashhad Iran
MM-27
The Mutual Effect of Iron and Manganese on Microstructure and Mechanical Properties of AluminiumSilicon Alloy
Mehdi Mazar Atabaki, Alireza Darvishi, Ali Maleki, Vahid Aboei Mehrizi University Technology Malaysia, Yazd Shahid Sadoghi University, Science and Technology University Malaysia, Iran
MM-28
Effect of Semi-Solid Forming on the Microstructure and Mechanical Properties of the Iron Containing Al-Si Alloys
S.G. Shabestari, E. Parshizfard, F. Sahihi Iran University of Science and Technology Iran
MM-29
Cyclic Oxidation of Fe-Si-Cr And Fe-Mn-Si-Cr-Ni Alloys

A. M. S. Malafaia, M. T. Milan, R. M. M. Riofano, O. Maluf, M. F. De Oliveira University of Sao Pulo, Materials Institute of Brazil Brazil

NON-FERROUS METALLURGY / DEMR DII METALLER METALURJS
NF-01
Selestitin Amonyum Karbonat/Bikarbonat eren Amonyakl zeltilerde SrCO3a Dntrlmesi The Conversion of Celestite to SrCO3 in Ammoniacal Solution Containing Ammonium Carbonate/Bicarbonate
Mert Zoraa, Cem Kahruman Istanbul University Trkiye
NF-02
Kalsiyum Volframatn Okzalik Asit zeltilerinde znme Davran Dissolution Behaviour of Calcium Tungstate in Oxalic Acid Solutions
Ahmet Orkun Kalpakl, Sedat lhan, Cem Kahruman, brahim Yusufolu Istanbul University Trkiye
NF-03
elit Mineralinde Bulunan Povellitin Okzalik Asitli zeltilerde znme Davran Dissolution Behaviour of Powellite Associated with Scheelite in Oxalic Acid Solutions
Sedat lhan, Ahmet Orkun Kalpakl, Cem Kahruman, brahim Yusufolu Istanbul University Trkiye
NF-04
elit Mineralindeki Safszlk Elementlerin Okzalik Asitli zeltilerde znme Davranlar Dissolution Behaviour of Impurities in Scheelite in Mineral Oxalic Acid Solutions
Ahmet Orkun Kalpakl, Sedat lhan, Cem Kahruman, brahim Yusufolu Istanbul University Trkiye
NF-05
Gzenekli Silisyum Dioksit Peletlerin Elektrodeoksidasyon Yntemi ile Erimi Tuz inde ndirgenmesine Ynelik almalar Investigation of Reduction of Porous Silica Pellets by Electro-deoxidation in Molten Salts
Emre Ergl, shak Karakaya, Metehan Erdoan Middle East Technical University Trkiye
NF-06
Piritik Refrakter Altn Cevherlerinin Ate Analizi Optimizasyonu The Fire Assay Optimization of Pyritic Refractory Gold Ores
Ahmet Turan, Onuralp Ycel Istanbul Technical University Trkiye
NF-07
Oksitli Bakr Cevherlerinin zmlendirilmesi Dissolution Kinetics of Oxide Copper Ores

Can Akka, M.eref Snmez, Onuralp Ycel Istanbul Technical University Trkiye

NF-08
Elektroliz Parametrelerinin Cu-Zn Alam Tozlarnn Grnr Younluu ve Mikroyaps zerine Etkisi The Effect of Electrolysis Parameters on the Apparent Density and on the Morphology of Cu-Zn Alloy Powder
Gke Hap, Gkhan Orhan Istanbul University Trkiye
NF-09
Li-iyon Pilleri iin Cu-Sn Anotlarn Elektrokimyasal Yntemle retimi Production of Cu-Sn Anodes for Lithium-ion Batteries by Electrochemical Method
Gizem Gzey Gezgin, Gkhan Orhan Istanbul University Trkiye
NF-10
Altn Cevherlerinin Ate Analizlerinde Kullanlan Curuatrclarn Etkilerinin ncelenmesi Investigation of Effects of Flux Materials which are used on the Fire Assay of Gold Ores
Haluk Baaran, Ahmet Turan, Onuralp Ycel Istanbul Technical University Trkiye
NF-11
The Electrochemical Behavior of Iron in Copper Electrowining Electrolyte

Elham Mohimi, Hossein Yoozbashizade Sharif University of Technology Iran
NF-12
The Effect of Mechanical Activation on Calciothermic Reduction of Titanium Dioxide

Mohammad Reza Aboutalebi, S. Khani, S.H. Seyedein Iran University of Science and Technology Iran
RECOVERY AND ENVIRONMENTAL PRECAUTIONS IN METALLURGY / GER KAZANIM VE METALURJDE EVRE KORUYUCU NLEMLER
REM-01 Eski Asfalt Kaplamalarn Geri Dntrlmesi ve Bitml Scak
Karmlarda Yeniden Kullanm Recycling and Reuse of Old Asphalt Coatings in Hot Bituminous Mixtures
brahim Snmez, Esin Gnay, Aydn Topu, Mustafa Kara, Seyit Ali Yldrm, Bayise Kavakl SFALT A.., TBTAK Marmara Research Center Trkiye
REM-02 Valorization of Plastics Bag Wastes in the Mortar and the Study of
Temperature Effect
Ghernouti Youcef, Bahia Rabehi University of Mascara Algeria

IRON AND STEEL METALLURGY DEMR-ELK METALURJS
IS-01
Kromitin Karbotermal Redksiyonuna Mekanik Aktivasyonun Etkisi Effect of Mechanical Activation on Carbothermal Reduction of Chromite
Fatih Apaydn, Ahmet Atasoy, Kenan Yldz Bartn University, Sakarya University Trkiye
IS-02
sdemirde Endstriyel Suyun Ynetilmesi The Management of Industrial Water in sdemir

Blent Demirel SDEMR Iskenderun Iron & Steel Integrated Plant Trkiye
IS-03
Metalotermik Yntemle Ferromolibden retimindeki Parametrelerin Optimizasyonu Optimization of Parameters of Ferromolybdenum Production via Metalothermic Reduction Process
Gven Gven, Murat Alkan, Bora Derin, Onuralp Ycel Istanbul Technical University Trkiye
IS-04
Torpidolarda Kullanlan Refrakter Malzemesinin mrnn Artrlmas iin Yaplan Shotcrete almalar Application of Shotcrete Method to Improve the Service Life of Refractory Material in Torpedo Cars
Bora Balc, Kamil Eken SDEMR Iskenderun Iron & Steel Integrated Plant Trkiye
IS-05
Studies and Researches on Determining the Characteristic of Particles Used in Furnaces Load
Ilie Butnariu, Florentin Mihai Ruica, Danut Ionut Florescu, Alexandru Cernianu University Politechnica of Bucharest Romania
IS-06
Effect of Temperature Dependent Heat Capacity of Solid Additive-Bath System upon Instant Interface Temperature at the Time of Dunking of the Additive in the Bath
Rajendra Prasad Singh, Anant Prasad National Institute of Technology India
IS-07
Thermodynamic Behaviors of Selenium in Liquid Iron

Seon-Hyo Kim, Chang-Woo Seo, Sung-Koo Jo, Bo Song, Ho-Sun Hwang4 POSTECH, Research Institute of Industrial Science&Technology, University of Science and Technology in Beijing, 4POSCO Specialty Steel South Korea, China
IS-08
Mathematical Modeling for Developing Iron Bath Reactor with H2-C Mixture Reduction
Bo Zhang, Huai-Wei Zhang, Jia-Jun Mao, Jie Guo, Qiu-Ju Li, Jie-Nan Liu, Xin Hong Shanghai University China

HEAT TREATMENT / ISIL LEM
HT-01
AA 6063 Alminyum Alamnn Yalanma Davran Aging Behaviour of AA 6063 Aluminum Alloy
Sebahattin Krtay, Ayta Bahtiyar Istanbul University Trkiye
HT-02
stemperleme Scaklnn Arakritik stenitleme Scaklklarndan stemperlenmi Kresel Gratli Dkme Demirin Mikroyap ve Yorulma Dayanm zerine Etkisi The Inuence of the Austempering Temperatures on the Microstructure and the Fatigue Strength of the Austempered Ductile Iron Austenitized from Intercritical Austenitizing Temperatures
smail Oval, Volkan Kll, Mehmet Erdoan Hacettepe University, Gazi University Trkiye
HT-03
Effect of Austempering Temperature and Depth of Cut on the Machining Behavior of Austempered Ductile Iron
Behzad Avishan, Sasan Yazdani Sahand Technical University Iran
HT-04
Anisotropic Transformation Strain and Its Consequences in Coupling of Prior Forming Operations with Heat Treatment Simulation
Caner imir, Thomas Lbben, Brigitte Clausen, Franz Hoffmann, Hans-Werner Zoch Foundation Institute of Materials Science Germany
HT-05
The Inuence of Geometrical Conditions on Rewetting Behaviour of Cylindrical Components

Frerichs Friedhelm, Thomas Lbben, Franz Hoffman, Hans-Werner Zoch IWT Bremen Germany
HT-06
Analysis of Soaking Treatments in 5383 Type Al-Mg Alloy Ingots

Tamara Radetic, Miljana Popovic, Endre L. Romhanji, Branislava Milovic, Radomir Dodok University of Belgrade, Impol-Seval Aluminum Rolling Mill Serbia
HT-07
Temperature Dependence of the Quenching Properties of Vegetable Oils Compared to Petroleum Oil Quenchants
Ester Carvalho de Souza, Carlos Alberto Bronzini, Analia Gaston3,4, Lauralice de Campos Franceschini Canale, Gustavo Sanchez Sarmiento4,5, George E. Totten6 Sao Paulo University, Universidad Austral, Universidad Nacional de Rosario, 4 Universidad del Salvador, 5Universidad de Buenos Aires, 6Texas A&M University Brazil, Argentina, USA
HT-08
Vegetable Oil Based Quenchants: Effect of Antioxidants on Oxidative Stability and Initial Quenching Performance of Soybean Oil and Palm Oil
Gabriela Belinato, Lauralice de Campos Franceschini Canale, George E. Totten Universidade de Sao Paulo, Texas A&M University Brazil, USA

HT-09
Gas Carburizing of Introducing Hydrocarbon Gas Directry in Furnace
Hiroaki Fujii, Masahiro Okumiya,Yoshiki Tsunekawa,Yusuke Kawagoe Toyota Technological Institute, Toho Gas Co., Ltd Japan
HT-10
Surface Modication of Steel with High-Frequency Induction Carburizing in Methanol

Yudai Ogawa, Masahiro Okumiya, Yoshiki Tsunekawa Toyota Technological Institute Japan
HT-11
Investigating the Distortion of the Gas-Quenched Steel Samples by Dimensional Analysis

Betl Pelin Maradit, Caner imir, Thomas Lbben, C. Hakan Gr Middle East Technical University, Stiftung Institut fr Werkstofftechnik Germany, Trkiye
HT-12
Mathematical Model of Heat Transfer During Convective Quenching of Cylindrical Probes

B.Hernandez-Morales, H.J. Vergara- Hernandez, G. Solorio Diaz Depto.de Ingenieria Metalurgica Universidad Nacional Autonoma de, Posgrado de Ciencias en Metalurgia, Instituto Tecnologico de Morelia, Facultad de Ingenieria Mecanica Mexico
HT-13
Failure Detection by Means of Sound Emission During Steel Quenching

Franc Ravnik, Janez Grum University of Ljubljana Slovenia
SURFACE TREATMENT / YZEY LEMLER

ST-01
Sol Jel Yntemiyle SiO2 Kaplanan eliin Korozyon Davran Corrosion Resistant Behavior of SiO2 Coated Steel by Sol Gel Technique
Sebahattin Krtay, Aliye Arabac, Cem Kahruman Istanbul University Trkiye
ST-02
Wear Properties of TiN / TiO2 Duplex Treated CP-Ti CP-Ti zerine Dubleks Kaplanm TiN/TiO2 Tabakann Anma Davran
Yenal Vangl, zg Bayrak, Akgn Alsaran, Ayhan elik Atatrk University Trkiye
ST-03
Y2SiO5 Tozunun retimi ve Plazma Sprey Kaplama Teknii ile Kaplanmas Production of Y2SiO5 Powder and Coating with Plasma Spray Technique
Salih Emre Yldrm, Fatih stel, Nil Toplan Sakarya University Trkiye

ST-04
Elektrolitik Yntemle Seramik Nano Partikll Krom Metal Matrisli Kompozit Kaplamalarn retilmesi, Karakterizasyonu ve Mikromekanik zelliklerinin Belirlenmesi Production, Characterization and Investigation of Micro-Mechanical Properties of Ceramic Nano Powder Reinforced Chromium Matrix Composite Coatings via Electrolytic Method
Orkut Sancakolu, Mustafa Erol, Bahattin Aaday, Erdal elik Dokuz Eyll University Trkiye
ST-05
Plazma Sprey Yntemi ile Y-Psz Kaplanm Alminyum Alamnn Anma zellikleri Wear Properties of Plasma Sprayed Y-Psz Coated Aluminum Alloy
Eray Erzi, Selim Yldrm, Suat Ylmaz Istanbul University Trkiye
ST-06
Surface Modication of Etial-195 Cast Aluminum Alloy by Friction Stir Processing (FSP) Etial-195 Dkm Alamnn Srtnme Kartrma Yntemiyle (SKY) Yzey Modikasyonu
Narin nal, Hasan Erdem amurlu Akdeniz University Trkiye
ST-07
Silisyum Karbr nce Filmlerin Reaktif Doru Akm Manyetik Alanda Sratma Yntemiyle retimi ve Karakterizasyonu Production and Characterization of Silicon Carbide Thin Films Deposited by Reactive DC Magnetron Sputtering
Erdem Bakurt, Tolga Tavanolu, Onuralp Ycel Istanbul Technical University Trkiye
ST-08
Elektrik Ark Pskrtme Yntemi ile Korozyon Koruyucu Zn ve Zn/15Al Kaplamalarn Optimum artlarda retilmesi ve Karakterizasyonu Zn and Zn/15Al Protective Coatings against Corrosion Were Produced in Optimum Conditions by Twin Wire Arc Spray Technique and Characterization
Ahmet Gle, Ahmet Trk, Fatih stel, Fevzi Ylmaz SK, Sakarya University, Istanbul Arel University Trkiye
ST-09
Production and Oxidation of Nb-Cr-Ti Ternary Alloys Nb-Cr-Ti l Alamlarn retimi ve Oksitlenmesi
Esra Dokumac, Elif Erolu, Blent nay Dokuz Eyll University Trkiye
ST-10
Elektroliz Yntemi ile retilen Ni-SiC Kompozit Kaplamalarn Korozyon Davran Corrosion Behavior of Electrodeposited Ni-SiC Composite Coatings
Serkan zkan, Gke Hap, Gkhan Orhan Istanbul University Trkiye

ST-11
Mikro Ark Oksidasyon leminde Farkl zelti Bileimlerinin 6060 Kalite Alminyum Alamnn Morfolojik zelliklerine ve Korozyon Direncine Etkisi The Effect of Different Solution Constant in the Micro ARC Oxidatiom Process on the Morphological Properties and Corrosion Resistance of 6060 Aluminum Alloy
Aysun Ayday, D. Alexander Becerik, L. Cenk Kumruolu, Ahmet zel Sakarya University Trkiye
ST-12
Mikro Ark Oksidasyon Yntemiyle 6060 Alminyum Alamnn Yzey zelliklerinin Gelitirilmesi The Surface Properties of 6060 Aluminium Alloy Improved by Micro Arc Oxidation Process
Aysun Ayday, L. Cenk Kumruolu, Ahmet zel, S. Can Kurnaz, Mehmet Durman Sakarya University Trkiye
ST-13
Scak Daldrma ile Galvanizlemede Alnabilecek Konstrktif Tedbirler Constructive Expedients in Galvanization with Hot Dipping Methods
Yksek Bilir SDEMR Iskenderun Iron & Steel Integrated Plant Trkiye
ST-14
SiC Katkl Bazalt Esasl Kaplamalarn Yapsal zelikleri Structural Properties of SiC Reinforced Basalt Based Coatings
Ediz Ercenk, Gnhan Bayrak, Uur en, enol Ylmaz Sakarya University Trkiye
ST-15
Mehmet Uysal, Ramazan Karslolu, Ahmet Alp, Hatem Akbulut Sakarya University Trkiye
Alkali Akmsz Kaplama Yntemi ile Al2O3 Seramik Partikllerinin Nanoyapl Nikel Kaplanmas Nano-structured Ni Deposition on Al2O3 Particles by Basic Electroless Coating
ST-16
Yeniden zeltiye Alma Scaklnn 7075 Alminyum Alamlarnn Anma Davranna Etkisi The Effect of Retrogression and Reaging (RRA) Heat Treatments Temperature on Wear Behaviour of 7075 Aluminium Alloys
Ramazan Ylmaz, Dursun zyrek, Erkan Kibar Sakarya University, Karabk University Trkiye
ST-17
Fe-Mn-C-Si Sert Yzey Alamlarnn Anma zellikleri The Wear Properties of Fe-Mn-C-Si Hardfacing Alloys
Ramazan Ylmaz Sakarya University Trkiye

ST-18
NiCr nce Filmlerin Yapsal ve Elektriksel zelliklerine Farkl Altlklarn Etkisi Effect of Different Substrates on Mechanical and Electrical Properties of NiCr Thin Films
Murat Danman, Nurhan Cansever Yldz Technical University Trkiye
ST-19
Study of Zinc Coatings on Steel Substrate Attained by Different Elements Added

Tamara Radu Nicu, Maria Vlad, Florentina Potecasu, Lucica Balint University Dunarea Romania
ST-20
Enhancement of the Abrasive Wear Resistance of Gray Cast Irons by Ferritic Nitrocarburising Process
Mohamed Zine Touhami, S. Tlili, A.Khettache, Y.Khelfaoui, Ali Hadji4 University of Annaba, Laboratory of Physical Metallurgy and Properties of Materials, University of Bejaia, 4Laboratory of Foundry Algeria
ST-21
The Effect of Shot Peening Operation on Fatigue Behavior of an Alloyed Austempered Ductile Iron
Sasan Yazdani, Amir Behzad Sadighzadeh, Behzad Avishan Sahand Technical University Iran
ST-22
Obtaining and Characterization of Phosphated Lubricant Layers on Iron Objects

Costica Bejinariu, Andrei Victor Sandu, Leandru Gheorghe Bujoreanu, Lulian Ionita, Ion Sandu University of Lasi, Al. I. Cuza University Romania
ST-23
Bonding Mechanism of Aluminum Clad Steel Strip

Mehdi Soltan Ali Nezhad, Ali Haerian Ardakani Ferdowsi University of Mashhad Iran
CASTING / DKM
C-01
Savurma (Santrifj) ve Kuma Dkm Yntemi ile retilmi Dktil Demir Boru ve Fittinglerde Mekanik zellikler Mechanical Properties Ductile Iron Pipes and Fittings Produced by Centrifugal and Sand Casting
Fevzi Ylmaz, Mustafa Bayraktar Istanbul Arel University, Istanbul Su ve Kanalizasyon daresi Trkiye
C-02
Dkm Simlasyon Programyla Dkme Demir Dkmlerinde Besleyici Tasarm Uygulamalar Computer Aided Simulation of Feeder Design in Cast Iron Casting
Ramazan Kaykc, Murat olak Sakarya University Trkiye

C-03
Sv Kat Arayzey Balanmal Bi-Metal Kompozit Malzeme retimi zerine Deneysel ve Simlasyon almas An Experimental and Simulation Study on Bimetal Composite Material Interface by Liquid-Solid Bonding
Levent Cenk Kumruolu, Soner zden Ertrk, Ahmet zel Sakarya University Trkiye
C-04
elik Dkmde Dendritleraras Sv Akm iin Szlme Eii Deerinin Belirlenmesi ve ekinti Oluumunun ncelenmesi Determination of Percolation Threshold for Interdendritic Liquid Metal Flow and Investigation of Shrinkage Formation in Steel Castings
Soner zden Ertrk, Cem Aydn, Emin Yaldz, L.Cenk Kumruolu, Ahmet zel Sakarya University Trkiye
C-05
Comparison of Feedability of Ti and B Grain Rened A356

Derya Dispinar, Arne Nordmark, Joruun Voje, Lars Arnberg SINTEF Materials and Chemistry, Alcoa Aluminium, NTNU Norway
CERAMICS, GLASSES, REFRACTORIES / SERAMK, CAM, REFRAKTER MALZEMELER

CGR-01
Alminyum Titanat / Forsterit Seramiklerin Mikro Yapsal ve Fiziksel Karakterizasyonu Microstructural and Physical Characterization of Aluminum Titanate/ Forsterite Ceramics
sral Kk, Hasan Gke, Tahsin Boyraz, M. Lt veolu Cumhuriyet University, Istanbul Technical University Trkiye
CGR-02
inko Oksitin Elektriksel letkenliine Molce % 0.3 Al2O3 Katksnn Etkisi The Effects of 0.3 Mol % Al2O3 Addition on the Electrical Conductivity of Zinc Oxide
Berat Yksel Istanbul University Trkiye
CGR-03
TeO2-CdO Camlarnn Termal ve Mikroyapsal Karakterizasyonu Thermal and Microstructural Characterization of TeO2-CdO Glasses
Gnkut Karaduman, Ali Erin Ersundu, Nuri Solak, Sheyla Aydn Istanbul Technical University Trkiye
CGR-04
B2O3 Katkl Tellrit Camlarn Termal ve Yapsal Karakterizasyonu Thermal and Microstructural Characterization of B2O3 Containing Tellurite Glasses
Duygu Yardmc, Ali Erin Ersundu, Nuri Solak, Sheyla Aydn Istanbul Technical University Trkiye

CGR-05
Sol-Jel retim Sreleriyle ndiyum Kalay Oksit Cam st nce Filmlerin Oluturulmas Sol-Gel Processing of Indium Tin Oxide (ITO) Thin Films on Glass
Caner Durucan, Hakan Yava, M. Tmerkan Kesim Middle East Technical University Trkiye
CGR-06
Nano Boyuttaki Al2O3 Seramiklerinin Spark Plazma Sinterleme Yntemi ile retimi Production of Nano Dimension Al2O3 Ceramics by Spark Plasma Sintering Method
Burcu Apak, Gltekin Gller, Onuralp Ycel, Filiz nar ahin Istanbul Technical University Trkiye
CGR-07
Karbon Nanotp Takviyeli Almina Seramiklerin Ekstrzyonu ve Karakterizasyonu Extrusion and Characterisation of Carbon Nanotube Reinforced Alumina Ceramics
Kemal Dnerta, Zeynep Talukur, Nilgn Kukonmaz, Cengiz Kaya Yldz Technical University Trkiye
CGR-08
Mekanik Aktivasyonun Kaolen Seramik Sistemindeki Mullit Oluumuna Etkisi The Effect of Mechanical Activation on the Formation of Mullite in Kaolin Ceramics System
Hseyin zkan Toplan, Seval Ko, Kenan Yldz, Nil Toplan Sakarya University Trkiye
CGR-09
AlON Seramiklerin Spark Plazma Sinterlenmesi Spark Plasma Sintering of AlON Ceramics
Esra Halide Kanbur, Burcu Apak, Filiz nar ahin Yldz Technical University Trkiye
CGR-10
Tandilerde Kullanlan Prefabrik ekilli Refrakter Malzemelerin Olivin laveli Magnezya Esasl Hammaddeler ile Karakterizasyonu ve retimi Characterization and Production of Prefabricated Shaped Refractory Materials for Tundish Based on Olivine Added Magnesia Raw Materials
zgr Kadir Birben, aatay Durmu, Cengiz Hamzaebi, Hasan Gke, Serdar zgen, M. Lt veolu Metamin Mmessillik, Istanbul Technical University Trkiye
CGR-11
Perlit Tozlarnn Sinterlenme Davranlar The Sintering Behaviors of Perlite Powders

Ediz Ercenk, Anl ahin, enol Ylmaz, Volkan Gnay Sakarya University, TBTAK Marmara Research Center Trkiye

CGR-12
Si3N4 ile Balanan SiC (Sn-SiC) retim Parametreleri ve zellikleri Properties and Production Parameters of Si3N4 Binded SiC (SN-SiC)
Yasemin Demirci, mit Yurdakul, Murat Sert, Volkan Gnay TBTAK Marmara Research Center, Nurol Teknoloji A.. Trkiye
CGR-13
Yanma Sentezi Yntemi ile retilen Fe-Katkl Alminada Mikroyap Geliimi Microstructure Evolution in Fe-Doped Alumina Prepared via Combustion Synthesis
Yasemin elik, Ender Suvac Anadolu University Trkiye
CGR-14
Surface and Colloid Chemistry of Alkaline Niobate Piezoceramics Alkali Niyobat Piezoseramiklerin Yzey ve Kolloid Kimyas
zcan zmen, Ender Suvac Anadolu University Trkiye
CGR-15
Shape and Size Controlled Synthesis of Titanium Dioxide Particles ekil ve Boyut Kontroll Titanyum Dioksit Partikllerinin Sentezi
Gne Alp Yakaboylu, Ender Suvac Anadolu University Trkiye
CGR-16
Effects of Na2O, K2O and B2O3 on Crystallization Behavior and Microstructure of Diopside Based Tile Glass Ceramic Glazes Diopsit Esasl Duvar Karosu Cam Seramik Srlarda Na2O, K2O ve B2O3in Srn Kristalizasyon Davran ve Mikroyap zerindeki Etkileri
Betl Yldz,, Ender Suvac Anadolu University, Yurtbay Seramik Sanayi A.. Trkiye
CGR-17
Serkan Abal, Ahmet Ekerim anakkale Onsekiz Mart University, Yldz Technical University Trkiye
TiO2 ile Takviye Edilmi Al2O3 Esasl Tek Kristal Seramiklerin Karakteristik zelliklerinin Sar ile Karlatrlmas Characteristic Features of Al2O3 based Single Crystal Ceramics Doped with TiO2 - A Comparison with Sapphire
CGR-18
MgO-Spinel Kompozit Refrakterlerin Korozyon Davrannda SnO2 lavesinin Etkilerinin ncelenmesi Examination of the Inuences of SnO2 Addition on Corrosion Behaviour of MgO-Spinel Composite Refractories
Cemail Aksel, Pnar Uur Anadolu University Trkiye
CGR-19
LTCC Uygulamalar iin Cam/Al2O3 Kompozitlerin Sinterlenme zellikleri Sintering Properties of Glass/Al2O3 Composite for Low Temperature Co-Fired Ceramic (LTCC)
Ayen Kl,, Okan Addemir, Volkan Gnay TBTAK Marmara Research Center, Istanbul Technical University Trkiye

CGR-20
eitli Antioksidan Katklarnn MgO-C Tula zelliklerine Etkileri Effects of Various Antioxidant Addition on the Properties of MgO-C Brick
Ziya Aslanolu, etin Balan Sperate Atee Mukavim Malzeme Sanayi A.. Trkiye
CGR-21
Seramik Termostat zolatrlerin retimi ve Karakterizasyonu Production and the Characterisation of Ceramic Thermostat Insulators
alar Altun, M.Ercan Ama, M.eref Snmez Istanbul Technical University Trkiye
CGR-22
Effect of Iron Oxide on Microstructure and Sintering Behavior of Mag-Dol Refractories

Mitra Zeraati Jorshari, Hossein Sarpoulaki, Mohammad Bavand, Kourosh Bagheri, Ali Panahi Iran University of Science and Technology, Iranian Refractories Procurement and Production Co. Iran
CGR-23
The Effect of Iron Oxide Addition on the Properties and Microstructure of Magnesia-Doloma Refractories
Fatemeh Kashani Nia, Hossein Sarpoolaky, Rahim Naghizadeh, Kourosh Bagheri, Mehrzad Zamanipour Iran University of Science and Technology, Iranian Refractories Procurement and Production Co. Iran
CGR-24
Chemical and Physical Characterisation of Cementitious Mixes of Heat-Treated Clay and Lime
Yasmine Mleza, Mohamed Hajjaji Ayyad University Morocco
CGR-25
Investigation of Different Phase Formation in a Frittic Glaze at Different Temperatures

Hamid Reza Rezaie, Zahra Mahmoudi, Hossein Ghasaii Iran University of Science and Technology Iran
CGR-26
Plastic Deformation of Substoichioimetric Rutile TiO2-x

Abdelmalek Mebarek, Abdenacer Lemmoui, Mustapha Beccouche University Badji Mokhtar-Annaba Algeria
CGR-27
Study of the Behaviors of an Elaborated Mortars Based on Calcined Clay Halloysite Type
Bahia Rabehi, Khaled Boumchdda, Ghernouti Youcef University of Boumerdes, University of Mascara Algeria
FREE SHUTTLE SERVICES / SERVS SAATLER

FREE SHUTTLE SERVICES / SERVS SAATLER Free shuttle services are available during the congress. The schedules can be examined below or in your visitors invitation. Kongre sresince kongre alanna aada belirtilen gzergah ve saatlerde cretsiz servislerimiz olacaktr.Bu detaylar ziyareti davetiyenizde de bulabilirsiniz. Avclar Metrobus Last Stop - Accross Avclar Central Mosque by E-5 Avclar Metrobs Son Durak - Avclar Merkez Cami Kars E-5 zeri 11-14 November / Kasm 2010
Departure / Kalk: 09:00; 09:30; 10:00; 10:30; 11:00; 11:30; 12:00; 12:30; 13:00; 14:00; 15:00 Return / Dn: 12:30; 13:30; 14:30; 15:30; 16:30; 17:00; 17:30; 18:00; 19:00; 19:30
Bakrky Seabus Port Bakrky Deniz Otobs skelesi

Departure / Kalk: 09:30 12:30 14:30 Return / Dn: 15:00 16:30 18:00
11-14 November / Kasm 2010
DES Industrial Zone - In front of the Administrative Ofce Building DES Sanayi Blgesi - dari Binas n 11-13 November / Kasm 2010
Departure / Kalk: 09:30 Return / Dn: 18:30
Imes Industrial Zone - In front of mit Dkm D-Block 401. Str. Imes Sanayi Sitesi - mit Dkm n D-Blok 401. Sokak 11-13 November / Kasm 2010
Yldz Technical University - Metallurgical and Materials Engineering Department Yldz Teknik niversitesi - Metalurji ve Malzeme Mhendislii Blm 11-12 November / Kasm 2010
stanbul Technical University - Metallurgical and Materials Engineering Department stanbul Teknik niversitesi - Metalurji ve Malzeme Mhendislii Blm 11-12 November / Kasm 2010
NOTES // NOTLAR
NOTES // NOTLAR
NOTES // NOTLAR
evreci... ve daha da fazlas!
Metal, doayla buluuyor!

Sarbak Metal evreci rnleri en n plana koyuyor. Endstrileme artka toksit maddeler evreye yaylyor. Bunlarn etkilerini en aza indirmenin yolu mmkn olduu kadar temiz teknolojiler kullanmaktan geiyor. Sarbak Metal ekolojik hassasiyetle tasarlanm rnler sunuyor. tiiniz su bata olmak zere metalle etkileime giren herey temiz kalsn diye... retim Hatt: i dolu ubuk ve Profil i bo ubuk ve Profil Biyet Kle Ekosar - Ecobrass Ekosar - Ecocast Ekosar - Federalloy Gerek duyulan rnler gerilim giderme sl ilemine tabi tutulmaktadr.rnlerimiz ROHS ve REACH direktiflerine uygundur. retimimiz standart olarak Avrupa Normu (EN) ve Amerikan Normuna (ASTM) uygun olarak yapmaktadr. Mterilerimizden gelen zel profil istekleri, ilgili birimlerce incelenerek retimi gerekletirilir.
Arapcami Mah. Galata Mahkemesi Sok. Nafe Han No:13 K:2 D:12 34420 Karaky - stanbul - Trkiye Merkez Tel : 0212 237 66 04 (pbx) Faks : 0212 253 51 45 Fabrika Tel : 0282 725 19 60 (pbx) Faks : 0282 725 19 70
www.sarbak.com.tr
www.ekosari.com

Program IMMC2010

Uploaded by

Copyright:

Available Formats

Program IMMC2010

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Program IMMC2010

Uploaded by

Copyright:

Available Formats

15th International Metallurgy & Materials Congress

15. Uluslararas Metalurji ve Malzeme Kongresi

TMMOB METALURJ MHENDSLER ODASI

PROGRAMME BOOK / PROGRAM KTABI

11-13 November / Kasm 2010

TYAP Fair, Convention & Congress Center, STANBUL-TURKEY

15th International Metallurgy & Materials Congress

15. Uluslararas Metalurji ve Malzeme Kongresi

UCTEA Chamber of Metallurgical Engineers TMMOB Metalurji Mhendisleri Odas

IMMC2010 | Programme Book

UCTEA Chamber of Metallurgical Engineers TMMOB Metalurji Mhendisleri Odas

2 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS

Program Kitab | IMMC2010

Organization Committee Kongre Yrtme Kurulu

Middle East Technical University Istanbul Technical University

Middle East Technical University

TMMOB METALURJi MHENDiSLERi ODASI | 3

IMMC2010 | Programme Book

Session Coordinators Oturum Koordinatrleri

Middle East Technical University Sakarya University

Program Kitab | IMMC2010

Session Coordinators Oturum Koordinatrleri

TMMOB METALURJi MHENDiSLERi ODASI | 5

IMMC2010 | Programme Book

Advisory Board Kongre Danma Kurulu

Program Kitab | IMMC2010

International Scientific Committee Uluslararas Bilim Kurulu

IMMC2010 | Programme Book

UCTEA Chamber of Metallurgical Engineers

TMMOB Metalurji Mhendisleri Odas

8 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS

Program Kitab | IMMC2010

Invited Lecturers / Davetli Konumaclar

11 November Thursday 11 Kasm Perembe 2010

11 November Thursday 11 Kasm Perembe 2010

12 November Friday 12 Kasm Cuma 2010

12 November Friday 12 Kasm Cuma 2010

13 November Saturday 13 Kasm Cumartesi 2010

13 November Saturday 13 Kasm Cumartesi 2010

IMMC2010 | Programme Book

Invited Lecturers / Davetli Konumaclar

10 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS

Program Kitab | IMMC2010

Invited Lecturers / Davetli Konumaclar

TMMOB METALURJi MHENDiSLERi ODASI | 11

IMMC2010 | Programme Book

Invited Lecturers / Davetli Konumaclar

12 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS

Program Kitab | IMMC2010

Invited Lecturers / Davetli Konumaclar

TMMOB METALURJi MHENDiSLERi ODASI | 13

IMMC2010 | Programme Book

Invited Lecturers / Davetli Konumaclar

14 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS

Program Kitab | IMMC2010

Invited Lecturers / Davetli Konumaclar

TMMOB METALURJi MHENDiSLERi ODASI | 15

IMMC2010 | Programme Book

Invited Lecturers / Davetli Konumaclar

16 | UCTEA CHAMBER OF METALLURGICAL ENGINEERS