Certificate of Conformity

Certificate Number: 181016146GZU-001

On the basis of the tests undertaken, the sample<s> of the below product have been found to comply with the
requirements of the referenced specification<s>/standard<s> at the time the tests were carried out. This certificate is
part of the full test report<s> and should be read in conjunction with it ;

Applicant Name & Address: Shenzhen Growatt New Energy Technology Co.,Ltd
1st East & 3rd Floor of Building A, Building B, Jiayu Industrial Park, #28,
GuangHui Road, LongTeng Community, Shiyan Street, Baoan District,
Shenzhen, P.R.China
Product Description: PV Grid inverter
Ratings & Principle See Annex to Test Certificate of Conformity
Characteristics:
Models: MIN 2500TL-X, MIN 3000TL-X, MIN 3600TL-X, MIN 4200TL-X, MIN 4600TL-X,
MIN 5000TL-X, MIN 6000TL-X
MIN 2500TL-XH, MIN 3000TL-XH, MIN 3600TL-XH, MIN 4200TL-XH,
MIN 4600TL-XH, MIN 5000TL-XH, MIN 6000TL-XH
Relevant Standards IEC 61727 2nd ed:2004, Photovoltaic (PV) systems – Characteristics of the
Utility interface
IEC 62116 2nd ed.:2014, Test procedure of islanding prevention measures for
Utility-interconnected photovoltaic inverter
Certificate Issuing Office: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou
Science City, GETDD, Guangzhou, China
Date of Tests: 16 Oct 2018 to 21 Feb 2019
Test Report Number(s): 181016146GZU-001, 181016146GZU-002

Additional information in Appendix.

Signature
Name: Grady Ye
Position: Manager
Date: 26 Feb 2019

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of
this Certificate. Only the Client is authorized to permit copying or distribution of this Certifcate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are relevant only to the sample tested/inspected. This
Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Page 1 of 4 GFT-OP-11a (28-April-2017)

 APPENDIX: Certificate of Conformity
This is an Annex to Certificate of Conformity with Certificate/Report Number(s): 181016146GZU-001;

Ratings and Model MIN 2500TL- MIN 3000TL- MIN 3600TL- MIN 4200TL-
principal X X X
X
characteristics
Max.PV voltage 500 d.c.V 550 d.c.V
PV voltage range 80-500 d.c.V 80-550 d.c.V
PV Isc 16 d.c.A*2
Max.input current 12.5 d.c.A*2
Max.output power 2500W 3000W 3600W 4200W
Max.apparent power 2500VA 3000VA 3600VA 4200VA
Nominal output
230 a.c.V
voltage
Max.output current 11.3 a.c.A 13.6 a.c.A 16 a.c.A 19 a.c.A
Nominal output
50/60Hz
Frequency
Power factor range 0.8Leading – 0.8 lagging
Safety level Class I
Ingress Protection IP 65
Operation Ambient
Temperature -25℃ - +60℃

Model MIN 4600TL-X MIN 5000TL-X MIN 6000TL-X

Max.PV voltage 550 d.c.V
PV voltage range 80-550 d.c.V
PV Isc 16 d.c.A*2
Max.input current 12.5 d.c.A*2
Max.output power 4600W 5000W 6000W
Max.apparent power 4600VA 5000VA 6000VA
Nominal output
230 a.c.V
voltage
Max.output current 20.9 a.c.A 22.7 a.c.A 27.2 a.c.A

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of
this Certificate. Only the Client is authorized to permit copying or distribution of this Certifcate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are relevant only to the sample tested/inspected. This
Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Page 2 of 4 GFT-OP-11a (28-April-2017)

 APPENDIX: Certificate of Conformity
This is an Annex to Certificate of Conformity with Certificate/Report Number(s): 181016146GZU-001;

Nominal output
Ratings and 50/60Hz
Frequency
principal
characteristics Power factor range 0.8Leading – 0.8 lagging
Safety level Class I
Ingress Protection IP 65
Operation Ambient
-25℃ - +60℃
Temperature
Model MIN 2500TL- MIN 3000TL- MIN 3600TL- MIN 4200TL-
XH XH XH XH

Max.PV voltage 500 d.c.V 550 d.c.V

PV voltage range 80-500 d.c.V 80-550 d.c.V
PV Isc 16 d.c.A*2
Max.input current 12.5 d.c.A*2
Max. DC voltage 480 d.c.V
DC voltage range 350-480 d.c.V
Max. DC current 10 d.c.A
Max.output power 2500W 3000W 3600W 4200W
Max.apparent power 2500VA 3000VA 3600VA 4200VA
Nominal output
230 a.c.V
voltage
Max.output current 11.3 a.c.A 13.6 a.c.A 16 a.c.A 19 a.c.A
Nominal output
50/60Hz
Frequency
Power factor range 0.8Leading – 0.8 lagging
Safety level Class I
Ingress Protection IP 65
Operation Ambient
Temperature -25℃ - +60℃

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of
this Certificate. Only the Client is authorized to permit copying or distribution of this Certifcate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are relevant only to the sample tested/inspected. This
Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Page 3 of 4 GFT-OP-11a (28-April-2017)

 APPENDIX: Certificate of Conformity
This is an Annex to Certificate of Conformity with Certificate/Report Number(s): 181016146GZU-001;

Ratings and Model MIN 4600TL-XH MIN 5000TL-XH MIN 6000TL-XH

principal
characteristics Max.PV voltage 550 d.c.V
PV voltage range 80-550 d.c.V
PV Isc 16 d.c.A*2
Max.input current 12.5 d.c.A*2
Max. DC voltage 480 d.c.V
DC voltage range 350-480 d.c.V
Max. DC current 10 d.c.A
Max.output power 4600W 5000W 6000W
Max.apparent power 4600VA 5000VA 6000VA
Nominal output
230 a.c.V
voltage
Max.output current 20.9 a.c.A 22.7 a.c.A 27.2 a.c.A
Nominal output
50/60Hz
Frequency
Power factor range 0.8Leading – 0.8 lagging
Safety level Class I
Ingress Protection IP 65
Operation Ambient
-25℃ - +60℃
Temperature
Software version AL1.0 for MIN TL-XH series, AK 1.0 for MIN TL-X series

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of
this Certificate. Only the Client is authorized to permit copying or distribution of this Certifcate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are relevant only to the sample tested/inspected. This
Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Page 4 of 4 GFT-OP-11a (28-April-2017)