Aluminum Rigid Conduit (ARC)

Aluminum Rigid Conduit (ARC)

• Aluminum Rigid Conduit is light weight and is approximately one-third the
weight of steel
• Corrosion Resistant aluminum resists most corrosive atmospheres in
industrial environments
• Easy to install, no special tools needed to cut, bend or thread
• Low maintenance, doesn’t leave discoloring streaks or stains
• Certified to Canadian Standards Association Safety Standard
CSA C22.2 No.45.2
• Manufactured in accordance with ANSI C80.5
• Complete line of elbows, nipples and couplings
• Available in sizes 1/2 (16) - 6 (155)

FEATURES & SPECIFICATIONS

Codes & Standards Compliance
Alloy
Columbia-MBF Rigid Aluminum Conduit and Fittings are all manufactured
of 6063 alloy in temper designation T-1 to ensure maximum performance
in electrical installations. Temper T-5 conduit available in sizes 1/2 (16)
through 1 (27).
Standards
Columbia-MBF Rigid Aluminum Conduit is CSA Certified to CSA C22.2
No.45.2 “Standard for Electrical Rigid Metal Conduit - Aluminum, Red Brass
and Stainless Steel” and is manufactured to ANSI C80.5.
Thread Protectors
Color coded end caps keep threads clean and sharp and help provide
size recognition. Even sizes are blue; 1/2 sizes are black; and
1/4 sizes are red. Temper T-5 sizes 1/2, 3/4 & 1 are green.
Aluminum Rigid Conduit (ARC)
Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
Approximate
Trade Metric Outside Nominal Wall Bundle
Weight Per
Size Designator Diameter1 Thickness2 100 Ft. (30.5M) Quantity
in mm in mm lb kg ft m
1/2 16 0.840 21.34 0.104 2.64 28 12.7 1000 304.8
3/4 21 1.050 26.67 0.107 2.72 37 17.0 1000 304.8
1 27 1.315 33.40 0.126 3.20 55 24.7 500 152.4
1 1/4 35 1.660 42.16 0.133 3.38 72 32.5 250 76.2
1 1/2 41 1.900 48.26 0.138 3.51 89 40.2 250 76.2
2 53 2.375 60.33 0.146 3.71 119 53.8 200 61.0
2 1/2 63 2.875 73.03 0.193 4.90 188 85.0 100 30.5
3 78 3.500 88.90 0.205 5.21 246 111.7 100 30.5
3 1/2 91 4.000 101.60 0.215 5.46 296 134.1 100 30.5
4 103 4.500 114.30 0.225 5.72 350 158.9 100 30.5
5 129 5.563 141.30 0.245 6.22 479 217.2 60 18.3
6 155 6.625 168.28 0.266 6.76 635 287.8 60 18.3

Project Information NOTE: 1Tolerances: Size 1/2 (16) to 1 1/2 (41) +/- 0.015” (0.38mm); 2 (53) to
6 (155) +/- 1%
Company Name: 2For information only. Not a requirement of the CSA Standard.
Each length of conduit with coupling attached will be nominally 10’ (3.05m)
Address:
City:
State & Zip:
Phone: NOTE: Special orders are non-cancelable, non-returnable and
Project Name: non-refundable
City:
State: www.columbia-mbf.ca
Aluminum Rigid Conduit (ARC) Couplings and Elbows
Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2

GRC Elbow - Dimensions

Manufactured in accordance with ANSI C80.5 A = Radius
B = Offset
Aluminum Rigid Conduit (ARC) Couplings
Trade Metric
GRC NipplesApproximate
Threads Per
& CouplingsStandard
A = Diameter
C = Straight
B = Length
Weight Per
Size Designator Nominal O.D. (A) 2
Length (B) 1
Inch1 Package
15˚ 22.5˚ 100 Pieces 30˚ A
in mm in mm lb kg

1/2 16 1.078 27.38 1 5/8 41.3 14 6 2.7 100
B
3/4 21 1.328 33.73 1 41/64 41.7 14 9 4.1 50
1 27 1.562 39.67 1 31/32 50.0 11 1/2 13 5.9 25
1 1/4 35 1.953 49.61 2 1/32 51.6 11 1/2 19 8.6 25
1 1/2 41 2.219 56.36 2 1/16 52.4 11 1/2 23 10.4 25
2 53 2.750 69.85 2 1/8 54.0 11 1/2 35 15.9 15
2 1/2 63 3.281 83.34 3 3/16 81.0 8 68 30.8 8
3 78 3.812 96.84 3 5/16 84.1 8 91 41.3 6
3 1/2 91 4.438 112.71 3 13/32 86.5 8 108 49.0 6
4 103 5.000 127.00 3 33/64 89.3 8 142 64.4 5
5 129 6.219 157.96 3 61/64 100.4 8 242 109.8 1
6 155 7.312 185.74 4 1/4 108.0 8 320 145.2 1

45˚ 60˚ 90˚

Aluminum Rigid Conduit (ARC) 90 Degree Elbows
Trade Metric Approximate Standard D
Weight Per
Size Designator Radius (A) 1
Offset (B) 2
Straight (D) 1
Package
100 Pieces

1/2 16
in mm in mm in mm lb kg
4 102 5 7/8 149 1 1/2 38 22 10.0
GRC Elbow - Dimens
25
A

B
3/4 21 4 1/2 114 7 178 1 1/2 38 32 14.5 40
D
1 27 5 3/4 146 8 3/4 222 1 7/8 48 62 28.1 25
1 1/4 35 7 1/4 184 10 1/2 267 2 51 99 44.9 10
1 1/2 41 8 1/4 210 11 3/4 298 2 51 137 62.1 15˚
10 B
22.5˚
2 53 9 1/2 241 14 1/2 368 2 51 228 103.4 5
2 1/2 63 10 1/2 267 17 1/4 438 3 76 427 193.7 80
3 78 13 330 22 3/4 578 3 1/8 79 752 341.1 50
3 1/2 91 15 381 23 1/4 591 3 1/4 83 889 403.3 50
4 103 16 406 23 3/8 594 3 3/8 86 1049 475.8 36
5 129 24 610 34 7/8 886 3 5/8 92 2125 963.9 1
6 155 30 762 45 1/2 1156 3 3/4 95 3738 1695.6 1

Aluminum Rigid Conduit (ARC) 45 Degree Elbows

Trade Metric Approximate
Standard
Weight Per
Size Designator Radius (A)1 Offset (B)2 Offset (C)2 Straight (D)1 Package
100 Pieces
in mm in mm in mm in mm lb kg 45˚ 60˚
1/2 16 4 102 7 178 2 7/8 73 1 1/2 38 18 8.2 25 D
3/4 21 4 1/2 114 7 7/8 200 3 1/4 83 1 1/2 38 23 10.4 40
1 27 5 3/4 146 8 3/4 222 3 5/8 92 1 7/8 48 40 18.1 25
1 1/4 35 7 1/4 184 10 1/2 267 4 3/8 111 2 51 65 29.5 10
1 1/2 41 8 1/4 210 13 1/8 333 5 3/8 137 2 51 102 46.3 10 A B
2 53 9 1/2 241 14 1/2 368 6 152 2 51 150 68.0 5
2 1/2 63 10 1/2 267 17 1/2 445 7 1/4 184 3 76 278 126.1 80
3 78 13 330 21 533 8 5/8 219 3 1/8 79 442 200.5 50 D
3 1/2 91 15 381 26 1/8 664 10 7/8 276 3 1/4 83 659 298.9 50
4 103 16 406 26 1/4 667 10 7/8 276 3 3/8 86 777 352.4 36
5 129 24 610 35 7/8 911 14 7/8 378 3 5/8 92 1446 655.9 1 C
6 155 30 762 43 3/8 1102 18 457 3 3/4 95 2347 1064.6 1
1
Mimimum requirement as per CSA Standard
2
For information only, not a requirement as per CSA Standard
Sizes 2 1/2 (63) and larger shipped in palletized cartons or bulk.
Aluminum elbows also available in the following Degrees (60°, 30°, 22-1/2°, 15° & 11-1/4°)
NOTE: Special orders are non-cancelable, non-returnable and
non-refundable

6560 Northwest Drive, Mississauga, Ontario L4V 1P2

Phone / 905.362.0180 • Toll-Free / 866.632.0180 www.columbia-mbf.ca
Aluminum Rigid Conduit (ARC) Couplings and Elbows
Aluminum Rigid Conduit (ARC) Large Radius 90 Degree Elbows
Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
45˚ 60˚ 90˚
Approximate
Trade Metric
Weight Per
Size Designator Radius (A) Offset (B)2 Straight (D)2
100 Pieces D
in mm in mm in mm lb kg
1 27 12 305 20 5/8 524 8 5/8 219 152 68.9 A
1 27 15 381 24 1/4 616 9 1/4 235 178 80.7
B
1 27 18 457 27 7/8 708 9 7/8 251 204 92.5
D
1 27 24 610 34 5/8 879 10 5/8 270 251 113.9
1 27 30 762 41 1041 11 279 294 133.4
1 27 36 914 46 3/4 1187 10 3/4 273 333 151.0 B
1 27 42 1067 54 1372 12 305 384 174.2
1 27 48 1219 61 1/4 1556 13 1/4 337 436 197.8
1 1/4 35 12 305 20 5/8 524 8 5/8 219 202 91.6
1 1/4 35 15 381 24 1/4 616 9 1/4 235 236 107.0
1 1/4 35 18 457 27 7/8 708 9 7/8 251 271 122.9
1 1/4 35 24 610 34 5/8 879 10 5/8 270 333 151.0
1 1/4 35 30 762 41 1041 11 279 390 176.9
1 1/4 35 36 914 46 3/4 1187 10 3/4 273 442 200.5
1 1/4 35 42 1067 54 1372 12 305 510 231.3
1 1/4 35 48 1219 61 1/4 1556 13 1/4 337 578 262.2
1 1/2 41 12 305 20 5/8 524 8 5/8 219 249 112.9
1 1/2 41 15 381 24 1/4 616 9 1/4 235 291 132.0
1 1/2 41 18 457 27 7/8 708 9 7/8 251 333 151.0
1 1/2 41 24 610 34 5/8 879 10 5/8 270 410 186.0
1 1/2 41 30 762 41 1041 11 279 480 217.7
1 1/2 41 36 914 46 3/4 1187 10 3/4 273 543 246.3
1 1/2 41 42 1067 54 1372 12 305 627 284.4
1 1/2 41 48 1219 61 1/4 1556 13 1/4 337 711 322.5
2 53 12 305 20 5/8 524 8 5/8 219 330 149.7
2 53 15 381 24 1/4 616 9 1/4 235 386 175.1
2 53 18 457 27 7/8 708 9 7/8 251 442 200.5
2 53 24 610 30 3/8 772 6 3/8 162 465 210.9
2 53 30 762 41 1041 11 279 637 288.9
2 53 36 914 46 3/4 1187 10 3/4 273 721 327.0
2 53 42 1067 54 1372 12 305 833 377.8
2 53 48 1219 61 1/4 1556 13 1/4 337 944 428.2
2 1/2 63 12 305 20 5/8 524 8 5/8 219 516 234.1
2 1/2 63 15 381 24 1/4 616 9 1/4 235 606 274.9
2 1/2 63 18 457 24 3/8 619 6 3/8 162 591 268.1
2 1/2 63 24 610 31 1/8 791 7 1/8 181 755 342.5
2 1/2 63 30 762 37 1/2 953 7 1/2 191 904 410.1
2 1/2 63 36 914 44 3/4 1137 8 3/4 222 1082 490.8
2 1/2 63 42 1067 54 1372 12 305 1321 599.2
2 1/2 63 48 1219 61 1/4 1556 13 1/4 337 1500 680.4
3 78 15 381 24 1/4 616 9 1/4 235 791 358.8
3 78 18 457 24 3/8 619 6 3/8 162 772 350.2
3 78 24 610 33 1/8 841 9 1/8 232 1063 482.2
3 78 30 762 38 5/8 981 8 5/8 219 1223 554.8
3 78 36 914 46 7/8 1191 10 7/8 276 1494 677.7
3 78 42 1067 54 1372 12 305 1722 781.1
3 78 48 1219 60 1/4 1530 12 1/4 311 1916 869.1
3 78 60 1524 75 7/8 1927 15 7/8 403 2421 1098.2
3 1/2 91 18 457 26 3/8 670 8 3/8 213 1004 455.4
3 1/2 91 24 610 35 1/8 892 11 1/8 283 1349 611.9
3 1/2 91 30 762 38 1/2 978 8 1/2 216 1441 653.6
3 1/2 91 36 914 47 1194 11 279 1775 805.1
3 1/2 91 42 1067 54 1372 12 305 2039 924.9
3 1/2 91 48 1219 60 1/4 1530 12 1/4 311 2269 1029.2
2
For information only, not a requirement as per CSA Standard
Shipped in palletized cartons or bulk. NOTE: Special orders are non-cancelable, non-returnable and
Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°) non-refundable

6560 Northwest Drive, Mississauga, Ontario L4V 1P2

Phone / 905.362.0180 • Toll-Free / 866.632.0180 www.columbia-mbf.ca
Aluminum Rigid Conduit (ARC) Couplings and Elbows
Aluminum Rigid Conduit (ARC) Large Radius 90 Degree Elbows
Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
45˚ 60˚ 90˚
Approximate
Trade Metric
Weight Per
Size Designator Radius (A) Offset (B)2 Straight (D)2 100 Pieces D
in mm in mm in mm lb kg
4 103 18 457 27 3/8 695 9 3/8 238 1239 562.0 A
4 103 24 610 35 1/8 892 11 1/8 283 1593 722.6
B
4 103 30 762 39 3/8 1000 9 3/8 238 1749 793.3
D
4 103 36 914 47 1194 11 279 2096 950.7
4 103 42 1067 54 1372 12 305 2409 1092.7
4 103 48 1219 60 1/4 1530 12 1/4 311 2681 1216.1 B
4 103 60 1524 75 7/8 1927 15 7/8 403 3388 1536.8
5 129 30 762 41 1041 11 279 2474 1122.2
5 129 36 914 50 3/4 1289 14 3/4 375 3098 1405.3
5 129 42 1067 55 1397 13 330 3318 1505.0
5 129 48 1219 65 1/4 1657 17 1/4 438 4309 1954.6
5 129 60 1524 75 7/8 1927 15 7/8 403 4566 2071.1
6 155 36 914 50 3/4 1289 14 3/4 375 4128 1872.5
6 155 42 1067 55 1397 13 330 4421 2005.4
6 155 48 1219 65 1/4 1657 17 1/4 438 5738 2602.8
6 155 60 1524 75 7/8 1927 15 7/8 403 6080 2757.9
2
For information only, not a requirement as per CSA Standard GRC Nipples & Couplings A = Diameter
B = Length
Shipped in palletized cartons or bulk.
Also available in the following Degrees (60°, 45°, 30°, 22-1/2°, 15° & 11-1/4°)

Aluminum Rigid Conduit (ARC) Nipples

Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
Trade Metric Total Thread Threads Approximate Standard
Length (A) Weight Per
Size Designator Length (B)1 Per Inch1 Package
100 Pieces
in mm in mm lb kg B
1/2 16 (Close) 1 1/8 29 0.78 19.8 14 2 0.9 25
1/2 16 1 1/2 38 0.78 19.8 14 3 1.4 25
1/2 16 2 51 0.78 19.8 14 4 1.8 25
1/2 16 2 1/2 64 0.78 19.8 14 5 2.3 25 A
1/2 16 3 76 0.78 19.8 14 6 2.7 25
1/2 16 3 1/2 89 0.78 19.8 14 8 3.6 25
1/2 16 4 102 0.78 19.8 14 9 4.1 25
1/2 16 5 127 0.78 19.8 14 11 5.0 25
1/2 16 6 152 0.78 19.8 14 13 5.9 25
1/2 16 8 203 0.78 19.8 14 18 8.2 25
1/2 16 10 254 0.78 19.8 14 22 10.0 25
1/2 16 12 305 0.78 19.8 14 27 12.2 25
3/4 21 (Close) 1 3/8 35 0.79 20.1 14 3 1.4 25
3/4 21 1 1/2 38 0.79 20.1 14 3 1.4 25
3/4 21 2 51 0.79 20.1 14 5 2.3 25
3/4 21 2 1/2 64 0.79 20.1 14 6 2.7 25
3/4 21 3 76 0.79 20.1 14 7 3.2 25
3/4 21 3 1/2 89 0.79 20.1 14 9 4.1 25
3/4 21 4 102 0.79 20.1 14 10 4.5 25
3/4 21 5 127 0.79 20.1 14 13 5.9 25
3/4 21 6 152 0.79 20.1 14 18 8.2 25
3/4 21 8 203 0.79 20.1 14 21 9.5 25
3/4 21 10 254 0.79 20.1 14 26 11.8 25
3/4 21 12 305 0.79 20.1 14 32 14.5 25
1
Mimimum requirement as per CSA Standard
A tolerance of minus one thread applies to Total Length of Thread

NOTE: Special orders are non-cancelable, non-returnable and

non-refundable

6560 Northwest Drive, Mississauga, Ontario L4V 1P2

Phone / 905.362.0180 • Toll-Free / 866.632.0180 www.columbia-mbf.ca
Aluminum Rigid Conduit (ARC) Couplings and& Couplings
GRC Nipples Elbows A = Diameter
B = Length

Aluminum Rigid Conduit (ARC) Nipples (continued)

Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
Trade Metric Total Thread Threads Approximate Standard
Length (A)
Weight Per
Size Designator Length (B)1 Per Inch1 Package
100 Pieces
in mm in mm lb kg B
1 27 (Close) 1 1/2 38 0.98 24.9 11 1/2 4 1.8 25
1 27 2 51 0.98 24.9 11 1/2 6 2.7 25
1 27 2 1/2 64 0.98 24.9 11 1/2 8 3.6 25
1 27 3 76 0.98 24.9 11 1/2 10 4.5 25 A
1 27 3 1/2 89 0.98 24.9 11 1/2 12 5.4 25
1 27 4 102 0.98 24.9 11 1/2 15 6.8 25
1 27 5 127 0.98 24.9 11 1/2 19 8.6 25
1 27 6 152 0.98 24.9 11 1/2 23 10.4 25
1 27 8 203 0.98 24.9 11 1/2 32 14.5 25
1 27 10 254 0.98 24.9 11 1/2 40 18.1 25
1 27 12 305 0.98 24.9 11 1/2 49 22.2 25
1 1/4 35 (Close) 1 5/8 41 1.01 25.7 11 1/2 6 2.7 25
1 1/4 35 2 51 1.01 25.7 11 1/2 8 3.6 25
1 1/4 35 2 1/2 64 1.01 25.7 11 1/2 11 5.0 25
1 1/4 35 3 76 1.01 25.7 11 1/2 14 6.4 25
1 1/4 35 3 1/2 89 1.01 25.7 11 1/2 17 7.7 25
1 1/4 35 4 102 1.01 25.7 11 1/2 20 9.1 25
1 1/4 35 5 127 1.01 25.7 11 1/2 26 11.8 25
1 1/4 35 6 152 1.01 25.7 11 1/2 31 14.1 25
1 1/4 35 8 203 1.01 25.7 11 1/2 43 19.5 25
1 1/4 35 10 254 1.01 25.7 11 1/2 54 24.5 10
1 1/4 35 12 305 1.01 25.7 11 1/2 65 29.5 10
1 1/2 41 (Close) 1 3/4 44 1.03 26.2 11 1/2 9 4.1 25
1 1/2 41 2 51 1.03 26.2 11 1/2 11 5.0 25
1 1/2 41 2 1/2 64 1.03 26.2 11 1/2 14 6.4 25
1 1/2 41 3 76 1.03 26.2 11 1/2 18 8.2 25
1 1/2 41 3 1/2 89 1.03 26.2 11 1/2 21 9.5 25
1 1/2 41 4 102 1.03 26.2 11 1/2 25 11.3 25
1 1/2 41 5 127 1.03 26.2 11 1/2 32 14.5 25
1 1/2 41 6 152 1.03 26.2 11 1/2 39 17.7 25
1 1/2 41 8 203 1.03 26.2 11 1/2 53 24.0 10
1 1/2 41 10 254 1.03 26.2 11 1/2 67 30.4 10
1 1/2 41 12 305 1.03 26.2 11 1/2 81 36.7 10
2 53 (Close) 2 51 1.06 26.9 11 1/2 14 6.4 25
2 53 2 1/2 64 1.06 26.9 11 1/2 19 8.6 25
2 53 3 76 1.06 26.9 11 1/2 24 10.9 25
2 53 3 1/2 89 1.06 26.9 11 1/2 28 12.7 25
2 53 4 102 1.06 26.9 11 1/2 33 15.0 25
2 53 5 127 1.06 26.9 11 1/2 42 19.1 20
2 53 6 152 1.06 26.9 11 1/2 51 23.1 20
2 53 8 203 1.06 26.9 11 1/2 70 31.8 10
2 53 10 254 1.06 26.9 11 1/2 89 40.4 10
2 53 12 305 1.06 26.9 11 1/2 107 48.5 10
1Mimimum requirement as per CSA Standard Chart continued on the next page
A tolerance of minus one thread applies to Total Length of Thread

NOTE: Special orders are non-cancelable, non-returnable and

non-refundable

6560 Northwest Drive, Mississauga, Ontario L4V 1P2

Phone / 905.362.0180 • Toll-Free / 866.632.0180 www.columbia-mbf.ca
 GRC Nipples & Couplings A = Diameter
Aluminum Rigid Conduit (ARC) Couplings and Elbows B = Length

Aluminum Rigid Conduit (ARC) Nipples (continued)

Certified to Canadian Standards Association Safety Standard CSA C22.2 No.45.2
Manufactured in accordance with ANSI C80.5
Total Thread Threads Approximate
Trade Metric Standard
Weight Per
Size Designator Length (A) Length (B)1 Per Inch1 100 Pieces Package
B
in mm in mm lb kg
2 1/2 63 (Close) 2 3/4 70 1.57 39.9 8 21 9.5 10
2 1/2 63 3 76 1.57 39.9 8 24 10.9 10
2 1/2 63 3 1/2 89 1.57 39.9 8 32 14.5 10
2 1/2 63 4 102 1.57 39.9 8 39 17.7 10 A
2 1/2 63 5 127 1.57 39.9 8 54 24.5 8
2 1/2 63 6 152 1.57 39.9 8 69 31.3 8
2 1/2 63 8 203 1.57 39.9 8 99 44.9 8
2 1/2 63 10 254 1.57 39.9 8 129 58.5 5
2 1/2 63 12 305 1.57 39.9 8 159 72.1 5
3 78 (Close) 2 5/8 67 1.63 41.4 8 27 12.2 10
3 78 3 76 1.63 41.4 8 34 15.4 10
3 78 3 1/2 89 1.63 41.4 8 44 20.0 5
3 78 4 102 1.63 41.4 8 54 24.5 5
3 78 5 127 1.63 41.4 8 73 33.1 5
3 78 6 152 1.63 41.4 8 93 42.2 5
3 78 8 203 1.63 41.4 8 131 59.4 5
3 78 10 254 1.63 41.4 8 170 77.1 5
3 78 12 305 1.63 41.4 8 209 94.8 5
3 1/2 91 (Close) 2 3/4 70 1.68 42.7 8 33 15.0 5
3 1/2 91 4 102 1.68 42.7 8 61 27.7 4
3 1/2 91 5 127 1.68 42.7 8 84 38.1 4
3 1/2 91 6 152 1.68 42.7 8 107 48.5 4
3 1/2 91 8 203 1.68 42.7 8 153 69.4 3
3 1/2 91 10 254 1.68 42.7 8 199 90.3 3
3 1/2 91 12 305 1.68 42.7 8 245 111.1 3
4 103 (Close) 2 7/8 73 1.73 43.9 8 39 17.7 5
4 103 4 102 1.73 43.9 8 69 31.3 4
4 103 5 127 1.73 43.9 8 97 44.0 4
4 103 6 152 1.73 43.9 8 124 56.2 4
4 103 8 203 1.73 43.9 8 178 80.7 3
4 103 10 254 1.73 43.9 8 233 105.7 3
4 103 12 305 1.73 43.9 8 287 130.2 3
5 129 (Close) 3 76 1.84 46.7 8 52 23.6 1
5 129 5 127 1.84 46.7 8 125 56.7 1
5 129 6 152 1.84 46.7 8 162 73.5 1
5 129 8 203 1.84 46.7 8 235 106.6 1
5 129 10 254 1.84 46.7 8 309 140.2 1
5 129 12 305 1.84 46.7 8 382 173.3 1
6 155 (Close) 3 1/8 79 1.95 49.5 8 84 38.1 1
6 155 5 127 1.95 49.5 8 175 79.4 1
6 155 6 152 1.95 49.5 8 224 101.6 1
6 155 8 203 1.95 49.5 8 322 146.1 1
6 155 10 254 1.95 49.5 8 419 190.1 1
6 155 12 305 1.95 49.5 8 517 234.5 1
1
Mimimum requirement as per CSA Standard
A tolerance of minus one thread applies to Total length of Thread

NOTE: Special orders are non-cancelable, non-returnable and

non-refundable

6560 Northwest Drive, Mississauga, Ontario L4V 1P2

Phone / 905.362.0180 • Toll-Free / 866.632.0180 www.columbia-mbf.ca