TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP

STANDING INSTRUCTIONS NO. 05 - 0121

PAGE 1/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

Document Information
Cover Page

Location
Area
Document Type STANDING INSTRUCTIONS
Document Number 05 – 0121
Revision 0
Description Line 1 VISCOSIFIER FOR DIESEL OIL
Description Line 2
Date 07/06/02
Total Pages 8

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 2/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

APPLICATIONS :

Sand washing, diesel Hivis pills, oil base carrier fluid for gravel pack sand and facturation.

COMPOSITION AND DATE :

For 1000 US GAL of diesel oil :

- 12 LBS J 602 PH control

- 10 US GAL J 601 Activator

- 10 US GAL J 421 Gelling agent

Viscosity obtained is 135 cps in down hole condition at 1500 m. The viscosity curve is
about linear. If quantities cut by half, viscosity is about half.
Increase in the same way.

MIXING PROCEDURE :

1. Mix J 601 and J 602 together.

2. Pour this mixture into the diesel oil to viscosity, then mix.

3. Add J 421 stir thoroughly.

Notes :

1. A gel breaker can be used if needed, check with Dowell Schlumberger for composition
and adjustment of viscosity needed.

2. Crude oil can be viscosity, depending on the composition.

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 3/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

P.T. Dowell Schlumberger Indonesia

BALIKPAPAN LABORATORY REPORT

REPORT NUMBER :
BRI / 89 / 092

SUBJECT : Viscosity of YF “GO”

CUSTOMER : TOTALFINAELF E & P INDONESIE

FIELD : Handil

WELL : -

RIG : -

REQUESTED BY : T. Dornoy

L A R No. : memo

PREPARED BY : DATE : 03/06/89

S. Ma’arif

REVIEWED BY : DATE : 03/06/89

T. Dornoy

DISTRIBUTION : - LRI
- ASL

This job design is based on valuable know-how developed by or for DS The submission of this job design by DS and any use thereof client is based on the
understanding that : (1) the client will use this design solely for evaluation and will make on commercial or other use thereof except for evaluation without
first obtaining prior written approval from DS and (2) the client will not communicate any information regarding this job design to any third party and (3)
the job design being based on engineering theory and as there are many well conditions which are uncertain unknown and not subject to our control DS
does not and cannot warrant the accuracy or correctness of the recommendations stipulated in the job design.

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 4/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

BRI/89/092 Page : 02

Information requested :

Rheology

Summary :

Test temperature : 80° F, 150° F, and 170° F.

YF “GO” composition :

980 gal diesel oil

+ 10 gal J421 (J292)
+ 12 gal J601 (J366)
+ 10 gal J602 (J353)

Result :

Rheology (R1, B1, F1) Calculated Visc.

At 170 sec.

At 80 °F = 110 : 95 : 85 : 49 : 45 255 cps

At 150 °F = 85 : 79 : 71 : 21 : 15 213 cps
At 170 ° F = 55 : 50 : 40 : 9 : 6 120 cps

Mixing Procedure :

1. Mix J601 and J602 until J601 fully dissolved

2. Mix J421 and mixture of J601 & J602 into calculated amount of diesel oil
simultaneously.
3. Keep stirring until gel occurred.

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 5/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

P.T. Dowell Schlumberger Indonesia

BALIKPAPAN LABORATORY REPORT

REPORT NUMBER :
BRI / 89 / 089

SUBJECT : Breaking time test

CUSTOMER : TOTALFINAELF E & P INDONESIE

FIELD : Bekapai

WELL : BB.8 / BA.10

RIG : -

REQUESTED BY : T. Dornoy for P. Pineau

L A R No. : memo

PREPARED BY : DATE : 30/05/89

S. Ma’arif

REVIEWED BY : DATE : 30/05/89

T. Dornoy

DISTRIBUTION : - LRI
- ASL

This job design is based on valuable know-how developed by or for DS The submission of this job design by DS and any use thereof client is based on the
understanding that : (1) the client will use this design solely for evaluation and will make on commercial or other use thereof except for evaluation without
first obtaining prior written approval from DS and (2) the client will not communicate any information regarding this job design to any third party and (3)
the job design being based on engineering theory and as there are many well conditions which are uncertain unknown and not subject to our control DS
does not and cannot warrant the accuracy or correctness of the recommendations stipulated in the job design.

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 6/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

BRI/89/099 Page : 02

Information requested :

Gel breaking time

Summary :

Depth : 1610 m – 1615 m, BHST = 180° F

Gel Concentration at 1000 gal :

991 gal fresh water

+ 2.0 gal D47
+ 250 lbs. J285
+ 90 lbs. J164
+ 2 gal W35
+ 5 gal F75
+ 0.50 lbs. J218

Test Results :

________________________________________________________________________________________
Descriptions Rheology ( RI, BI, FI) App. Viscosity Percentage
At 100 rpm, cps to original
Rpm: 300 200 100 6 3
________________________________________________________________________________________

After mixing (80 F) 179 162 128 46 28 384 -

After 1 hr at 180 F 91 71 48 9 4 144 38 %

After 2 hr at 180 F 45 33 20 4 4 60 16 %
________________________________________________________________________________________

Viscosity is considered 100% break if the viscosity dropped 10% to the or original viscosity.

Note :
- Another test was run as above system without using of J218 (breaker)

After 4 hours curing time at 180 F viscosity dropper 47% (180 cps) to original viscosity.
And viscosity dropped 18% (69 cps) after 17 hours curing time at 180°F.

- At this temperature (180 F), W35 has been reduced from 5 gal/1000 gal to 2 gal/1000 gal to adjust PH solution and
reach a stable solution at these temperature ranges.

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 7/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

PT. DOWELL SCHLUMBER INDONESIA Inter Office Correspondence

To : TPT ENGINEERS Date : June 05, 1986

From : A. HARTONI File : F-003

Subject : STANDARD FLUID SYSTEM cc : TPT-FSM

USED FOR TOTALFINAELF BRI-LAB
E & P INDONESIE OPERATION :
WATER PAC FLUID, CACO3, HI-VSC. SOLUTION,
HI – VISC. SOLUTION (OIL)

1. WATER PAC FLUID 1000 GAL MIXING ORDER

H20 = 950 Gal 1

DO47 = 5 Gal 2
J285 = 250 Lbs. 3
J164 = 80-90 Lbs. 4
F78 = 5 Gal 7
W35 = 5 Gal for Handil field, 2 Gal
For Bekapai 5
M076/183 = 2 Gal 6
J218 = 2 Lbs. for handil, 0,5 Lb. For Bekapai 8

Viscosity result = 300 – 400 Cps.

2. CaC03 Solution per 1M(3) = SG ± 1.15 MIXING ORDER

H20 = ≤ 1 M(3) 1
DO47 = 0.5 Gal 2
J164 = 2 Lbs. 3
CaC03 = 250 Kg 4

3. HI-VISC SOLUTION PER 1000 GAL MIXING ORDER

H20 = 990 Gal 1

DO47 = 5 Gal 2
J164 = 85 Lbs. 3
CaC03 = 2–5 Gal 4

Viscosity ± 300-400 Cps

4. HI-VISC. SOLUTION (OIL) PER 1000 GAL MIXING ORDER

DIESEL OIL = 980 Gal 4

J292 (ex J421) = 10 Gal 3
J366 (ex J601) = 12 Lbs. 1
J353 (ex J602) = 10 Gal 2

K S/………. Visa : KS/………… Visa :

 TotalFinaElf E& P WIRE LINE, SNUBBING, WORKSHOP
STANDING INSTRUCTIONS NO. 05 - 0121
PAGE 8/8
REVISION 0
Indonésie VISCOSIFIER FOR DIESEL OIL DATE 05/1989

Note :

- Lab test result, Fan – VG Reading after mixing :

300, 200, 100, 6, 3

110 90 85 49 45

J366 and J353 are to be mixed together, prior to adding them together with the J292 to the
diesel.

Regards,

A. HARTONI

AH/lr

K S/………. Visa : KS/………… Visa :