Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    1521 Potting Materials For PV Junction Box: Product Description Application Method

    Uploaded by

    Usaha Mandiri
    1) 1521 is a two-component, room temperature cure silicone system used for potting electronic components like PV junction boxes. 2) It has a white color when mixed, with Part A and B mixed at a 6:1 weight or 4:1 volume ratio. 3) The product should be stored in a cool, dry area and has a shelf life of 6 months. Proper safety precautions should be followed when using.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1521 Potting Materials For PV Junction Box: Product Description Application Method

    Uploaded by

    Usaha Mandiri
    65 views1 page
    1) 1521 is a two-component, room temperature cure silicone system used for potting electronic components like PV junction boxes. 2) It has a white color when mixed, with Part A and B mixed at a 6:1 weight or 4:1 volume ratio. 3) The product should be stored in a cool, dry area and has a shelf life of 6 months. Proper safety precautions should be followed when using.

    Original Description:

    Original Title

    TONSAN-POTTANT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) 1521 is a two-component, room temperature cure silicone system used for potting electronic components like PV junction boxes. 2) It has a white color when mixed, with Part A and B mixed at a 6:1 weight or 4:1 volume ratio. 3) The product should be stored in a cool, dry area and has a shelf life of 6 months. Proper safety precautions should be followed when using.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views1 page

    1521 Potting Materials For PV Junction Box: Product Description Application Method

    Uploaded by

    Usaha Mandiri
    1) 1521 is a two-component, room temperature cure silicone system used for potting electronic components like PV junction boxes. 2) It has a white color when mixed, with Part A and B mixed at a 6:1 weight or 4:1 volume ratio. 3) The product should be stored in a cool, dry area and has a shelf life of 6 months. Proper safety precautions should be followed when using.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    1521 Potting Materials for PV Junction Box May 2020 TECHNICAL DATA SHEET

    APPLICATION METHOD
    PRODUCT DESCRIPTION
    1. Part A should be blended thoroughly before mix with
    1521 is two-component, room temperature cure silicon
    Part B in order to make filling material distribute
    system, used for electronic component applications on
    evenly;
    assembly line.
    2. Mix evenly according to the ratio;
    TYPICAL APPLICATIONS 3. Pot the mixed material;
    Typical applications involve PV junction box. 4. Recommended using automatic dispensing
    UNCURED PROPERTIES equipment to applying the potting compound.
    Chemical type.....…………………..…………… Silicone STORAGE AND SHELF LIFE
    Color(Mixed) .....………………….………………. white Product shall be ideally stored in a cool, dry area in
    Mixed Rate(weight) .....………………..…………… 6: 1 unopened containers at room temperature. Keep away
    Mixed Rate(volume).....………….….…….…..…… 4: 1 from children.The shelf life is 6 months.
    Viscosity of part A (mPa·s) ................................ 7000
    CAUTION
    Viscosity of part B (mPa·s ) ....................................25
    a) Allow adequate ventilation when using.
    Specific Gravity of part A (g/cm3) .....……......……1.47
    b) Avoid prolonged skin contact.
    Specific Gravity of part B (g/cm3)……….…...…… 0.99
    c) In case of eye contact, flush with water and seek
    Specific Gravity after mixed(g/cm3)……….…....…1.40
    medical attention.
    Pot Life( min) ............................................................8
    d) This product is not recommended for use in pure
    Gel Time( min) ........................................................60
    oxygen and/or oxygen rich systems and should
    Cured Specifications: The mix of part A and part B
    not be selected as a sealant for chlorine or other
    initiates the reaction. There is a secondary cure with
    strong oxidizing materials.
    atmospheric moisture that promotes full cure over 7
    e) Keep away from children.
    days.
    For complete safety and handling information,
    CURED PROPERTIES
    please refer to the appropriate Material Safety Data
    Measured on cured sheets ~2mm. Cured @ Sheets prior to using this product.
    (23±2)℃，(50±5)%RH for 7 days, tested at (23±2)℃.
    ORDERING INFORMATION
    Operating Temperature Range(℃)................–50～150
    Stock No. Unit Size
    Tensile strength(MPa) (ISO37，GB/T528) ......…....1.2
    152110A 12kg
    Hardness (ShoreA) (ISO7619，GB/T531) …………..40
    152110B 2kg
    Elongation at break (%)(ISO37，GB/T528)..............110
    Thermal Conductive(W/m.℃) （DIN EN 821） .....0.30
    Volume Resistivity(Ω.cm）
    (IEC60093，GB/T1692)………..….. …1.0×1015 Note

    Breakdown tension（kv/mm） The data provided herein are typical values for the purpose of technical reference only,
    should not be considered as the product specification or acceptance standard. All the
    (IEC 60243-1，GB/T1695)........................... 23 information is believed by Tonsan Adhesive Inc. (“Tonsan”) to be accurate and reliable,
    but due to the differences in the application conditions, substrate surfaces and/or curing
    Damp-Heat aging properties(Damp-Heat aging at conditions, Tonsan strongly recommends that the user should perform necessary tests
    before any purchase or practice, to determine the suitability of our product for the
    85℃，85%RH for 1000h) intended use. Furthermore, the storage and shipping conditions could also affect the
    stability, physical and mechanical properties of the product. Tonsan will not assume the
    Volume Resistivity(Ω.cm） responsibility for the results obtained by the user or any third parties, from the methods
    out of Tonsan’s control.
    (IEC60093，GB/T1692)……..………1.0×1015

    Suzhou TONSAN Adhesive Ltd.


    40 Youxiang Rd., Wuzhong Economic Development Zone, 215000, Suzhou, China

    You might also like