User Manual: 1GE+1FE+1POTS+WIFI 1GE+3FE+2POTS+1USB+WIFI 1Ge+3Fe+2Pots+1Usb+Wifi+Catv

C-DATA Z_EPON HGU Products
1GE+1FE+1POTS+WIFI
1GE+3FE+2POTS+1USB+WIFI
1GE+3FE+2POTS+1USB+WIFI+CATV
User Manual
Version：V1.1
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
Content
1 Note.................................................................................................................................................. 1
1.1 Installation Precautions......................................................................................................... 1
1.2 Precautions for Use............................................................................................................... 1
2 Brief..................................................................................................................................................3
2.1 Product Features....................................................................................................................3
2.2 Product Specifications...........................................................................................................4
2.3 Device Interface Definition...................................................................................................4
2.4 LED Description................................................................................................................... 5
2.5 Device Connection................................................................................................................ 5
2.6 Applications...........................................................................................................................6
3 Login Web Management Locally.................................................................................................... 6
3.1 Physical Connection of ONU and PC...................................................................................6
3.2 PC Access the WEB of ONU................................................................................................ 7
4 ONU Register Information Config.................................................................................................. 8
4.1 View ONU Register Status....................................................................................................8
4.2 View ONU Optical Power Information................................................................................ 8
5 Basic Configuration for Internet...................................................................................................... 9
5.1 Route Mode Configuration................................................................................................... 9
5.2 Configure Bridge WAN Connection for Internet................................................................16
5.3 View the WAN Connection Status...................................................................................... 18
5.4 Delete the WAN Connection...............................................................................................19
6 ONU LAN Configuration.............................................................................................................. 19
6.1 LAN IP Address Configuration...........................................................................................19
6.2 View LAN Client................................................................................................................ 20
7 Multicast/IPTV Configuration....................................................................................................... 21
7.1 Multicast/IPTV Service Setting.......................................................................................... 21
7.2 IGMP Snooping Setting...................................................................................................... 21
7.3 IGMP Proxy........................................................................................................................ 22
7.4 IGMP VLAN Configuration............................................................................................... 22
8 WLAN Configuration.................................................................................................................... 23
8.1 WLAN Basic Configuration............................................................................................... 23
8.2 WLAN Password Configuration.........................................................................................24
8.3 WLAN Virtual SSID........................................................................................................... 24
9 USB Interface Management...........................................................................................................25
9.1 USB Backup Configuration................................................................................................ 25
9.2 USB Recovery Configuration............................................................................................. 26
10 CATV Configuration.................................................................................................................... 26
10.1 Configure CATV Port Parameter...................................................................................... 26
10.2 View CATV Information...................................................................................................27
11 Voice Service Configuration........................................................................................................ 28
11.1 Create Voice WAN Connection.........................................................................................28
11.2 Voice Server IP Configuration.......................................................................................... 29
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
11.3 Voice Telephone number and Password Configuration.................................................... 30
11.4 View Voice Status Information..........................................................................................31
12 TR069 Remote Management....................................................................................................... 32
12.1 Configure Channel for TR069 Remote Management.......................................................33
12.2 TR069 Client Configuration............................................................................................. 33
13 Device Management.....................................................................................................................34
13.1 ONU Device Remote Access Settings.............................................................................. 34
13.2 Restore Default Setting..................................................................................................... 35
13.3 Firmware Upgrade............................................................................................................ 35
13.4 Device Reboot................................................................................................................... 36
Concluding Remarks......................................................................................................................... 37
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
1 Note
1.1 Installation Precautions

 Do not place the equipment near flammable or conductive items, high temperatures (such
as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding
appliances are stable.
 Check the cable for aging. Check and verify that the AC or DC input voltage is within the
permissible range of the device and that the polarity of the DC is correct.
 Unless the manufacturer permit, use the type of power indicated on the label and the
adapter supplied with the product.
 To prevent damage to the product from lightning, make sure that the ground of the power
outlet and the power adapter is securely grounded. In the thunderstorm, be sure to unplug
the power and all the connections.
 Equipment input voltage fluctuation should be less than 10%, the power plug, refrigerators,
hair dryer and iron should not use the same socket.
 To avoid electric shock or fire due to overload of the power outlet, damage to the cord or
damage to the plug, check the power cord regularly. If damage is found, replace it
immediately.
 Please place the device on a flat surface and can not place items on the device.
 Equipment is easy to produce heat when working, should maintain the appropriate cooling
space to avoid damage caused by overheating products. The elongated hole on the shell is
designed for heat dissipation. Keep the ventilation clean and avoid falling from the heat
sink into the equipment. Otherwise, the equipment may be damaged or fire. Do not spill
liquid onto the surface of the equipment.
1.2 Precautions for Use

 Please read the user manual carefully before using the equipment and follow all the
precautions on the user manual and the product.
 Avoid eye looked at the optical interface directly, so as to avoid the laser beam emitted by
the interface damage the eyes. Please try to wear safety glasses to effectively protect your
eyes from damage. It is best to plug in the fiber optic interface jacket when the optical
interface is not in use .
 Turn off the power when the device is not in use
 Before plugging the power supply, make sure that the power switch is turned off to avoid
surge. Be careful when unplugging the power supply and the transformer temperature may
be high.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 1
 To ensure safety, do not open the enclosure of the device, especially when the device is
powered up.
 Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the
equipment to avoid the use of liquids or sprays.
 Do not connect this product to any electronic product unless it is instructed by our
customer engineer or your broadband supplier, as any incorrect connection may cause
power or fire hazard.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 2
2 Brief
ZTE EPON HGU (HomeGateway ONU) series products are for telecommunications, radio
and television operators FTTH fiber household type multiple access requirements and design a
series of fusion EPON terminal product, the product is based on mature and stable, cost-effective
gigabit EPON technology, is a blend of correlates and gigabit Ethernet switching technology,
Voice technology, WLAN technology and powerful routing forward technology.High bandwidth,
high reliable, easy to management and good quality of service (QoS) guarantees etc, equipment
technical performance meet IEEE802.3 ah, China telecom EPON equipment technical
requirements (V2.1 & V3.0) such as the requirement of the specification, with the mainstream
manufacturers bureau OLT (Huawei, ZTE, Fiberhome) together used have good compatibility.
EPON technology is a combination of PON technology and Ethernet technology advantages
of emerging technologies, is a kind of point to multi-point forming technology.High bandwidth,
high efficiency, large coverage, and the numerous advantages of abundant user interface, etc., is
the operator to realize broadband access network business, and the comprehensive transformation
of the ideal technology.
Note: This manual is written in the form of 1GE+3FE+2POTS+1USB+WIFI+CATV ONU,

and other models ONU can also be referenced.
2.1 Product Features

 Provide 2 POTS ports, 4 10/100/1000M auto-adaptive Ethernet ports and 1 USB port
 Single fiber access, Offer a variety of Internet, Voice, Video business
 ONU meet the IEEE802.3 ah, China telecom CTC 2.1 & CTC3.0 standards
 Wi-Fi series meet 802.11 n/b/g technical standards,support 20Mhz/40Mhz
 Support H.248 and SIP voice protocol
 Support the PPPoE, DHCP, static IP broadband access
 Support NAT, static and dynamic routing, port forwarding
 Support data encryption, VLAN transparent and VLAN tag and untag
 Support has bandwidth speed limit function
 Support port loop detection/port link-state detection function/dying gasp alarm inform
function
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 3
 Support through the OLT remote upgrade/WEB local upgrade function
 Support broadcast storm inhibition function
 Isolation between different data port
 Support port flow control
 Support based on OLT as SNMP agent - each manufacturer of a unified network
management, easy to install and maintain
 Provide abundant fault alarm function, easy to fault diagnosis
 Support AES - 128, support for key generation and switch
 Support technology based on the DBA and priority of dual management model, to
ensure that the user specified minimum bandwidth requirements
 Support RJ-11 type voice interface
 Transmission distance: ≤1km
 And phone number: 3
 Balanced Ring: Vrms>50V
2.2 Product Specifications

Ambient temperature: 0°C～50°C
Relative humidity： 10% to 90% (non-condensing)
Power adapter input：12 V/0.5A
TX Optical Power：0~4dBm
RX Optical Power：-3~-27dBm
2.3 Device Interface Definition
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 4
2.4 LED Description
Indicator Description
1 PWR Power status On: The ONT is power on;
Off: The ONT is Power off;
On: Optical power lower than receiver
2 LOS GPON optical signals sensitivity ;
Off: Optical in normal
On: Success to register to OLT;
3 PON ONT Register Blinking: In process of registering to OLT;
Off: In process of registering to OLT;
On：The connection between the TEL port and
the voice server has been set up
4 TEL1-2 Telephone port status Blinking：The voice service of the TEL port is
established;
Off：The connection between the TEL port and
the voice server is not set up.
On: Ethernet connection is normal;
5 LAN1-4 LAN port status Blinking: Data is being transmitted through the
Ethernet port;
Off: Ethernet connection is not set up;
6 WIFI WIFI Blinking：Data is being transmitted
On：Wi-Fi function Opens
7 CATV CATV status On：CATV optical normal
Off：The CATV signals are not received
2.5 Device Connection

 Connect the fiber: Insert the SC fiber connector into the PON connector on the rear
panel of the ONU.
 Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each
home device, that is, the computer, IPTV set-top box, and so on.
 Connect telephone line: Connect telephone port of the ONU and telephone with
telephone line.
 Connect coaxial cable: Connect the coaxial cable to the RF connector of the ONU.
 Connect USB device: Connect USB device with ONU USB interface.
 Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU
12V DC power jack.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 5
2.6 Applications
3 Login Web Management Locally
3.1 Physical Connection of ONU and PC

a) Local NIC of PC connects to LAN port of ONU via wires.
b) Set the IP address of PC’s local NIC as 192.168.101.X (X：2-254).
c) Open cmd windows and make sure that PC can ping the management IP (192.168.101.1)
of ONU.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 6
3.2 PC Access the WEB of ONU
Make sure you can ping the ONU like #3.1. Open the IE Web broswer (IE, Firefo
x, Google), copy and paste URL: http: //192.168.101.1, the following pop-up Prompt landi
n-g page:
Input UserName：adminisp PasWord： adminisp

Click “Login” button. The product basics page appears, as follows：
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 7
You can start further configuration.
4 ONU Register Information Config
4.1 View ONU Register Status

1. Login ONU WEB, select Status -> Network Interface -> PON Inform, view the
ONU register status：
4.2 View ONU Optical Power Information

1. Login ONU WEB, select Status ->Network Interface -> PON Inform, view ONU
Optical Power Information：
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 8
5 Basic Configuration for Internet
Home Gateway Unit (HGU) ONU supports route function, so that there are route mode and
bridge mode for internet. The difference between route mode and bridge mode as follows :
Route mode：ONT as a home gateway equipment, ONT IP address can be obtained in three
ways, which includes DHCP, Static IP Address and PPPoE. The IP address of the device on the
user side is obtained through the DHCP address pool of the ONT, or by manually setting;
Bridge mode：The ONT does not obtain the IP address assigned by the upper device or can
not manually set the static IP address. It is used as a relay device and does not process the data.
There are three ways to obtain the IP address of the user side device, namely DHCP, PPPoE,
Static IP Address.
5.1 Route Mode Configuration
5.1.1 Configure PPPoE WAN Connection for Internet in Route Mode
1. Login ONU WEB, select Network ->WAN -> WAN Connection, and then there are
some parameters for us to configure as follows:
【IP Version】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’ or
‘Ipv6’
【Type】Select ‘PPPoE’
【Connection name】Select ‘Create WAN Connection’
【Port Banding】Band the physical ports (LAN1-4 Port ) with PPPOE WAN connection.
Besides, if user want to use wifi function, must bind any SSID with
DHCP WAN connection, and turn on wireless wifi function. When
user configures wifi function, could refer to WLAN configuration this
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 9
chapter.
【Enable DHCP】Select this option; The function mainly is used to assign IP address for
the lan side
【Enable NAT】Check ‘NAT’ feature；NAT is mainly used for address translation function
of local network and external network. The default is checked enable status. If
you do not check this option, maybe you can’t surf the internet.
【Service List】Select ‘ INTERNET’；Normally, select ‘ Internet ’ in the route mode
【VLAN Type】We can set this option according to your network plan. If there is vlan in
the network for internet, we have to check ‘VLAN Used’ option. If not,
we needn’t check this option, which will be “VLAN Transparency” or
“VLAN Unused”
【Vlan ID】Configure this option according to our network plan
【802.1p】Set the priority of vlan, The same as "enable Vlan", depending on the network
vlan planning to configure. The default priority is 0.
【MTU】The default is 1492；we have to change to lower MTU, such as 1400, if we can
ping the DNS but not access the website via WEB browser
【Username】Type PPPoE account, normally offered by ISP, for Internet
【Password】Type PPPoE password, normally offered by ISP, for Internet
【Authentication Type】Select ‘Auto’
【Connection Trigger】Select ‘Always on’
【 Idle Timeout 】 Default timeout value 1200 sec when choose authentication type as
‘Auto’
Note: the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 10
2. After configuring the parameters of PPPoE WAN connection as above, click ‘Create’ to
finish the setting：
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 11
5.1.2 Configure DHCP WAN Connection for Internet in Route Mode
‘Ipv6’
【Type】Select ‘DHCP’
【Port Banding】Band the physical ports (LAN1-4 Port ) with DHCP WAN connection.
chapter.
the lan side
【Service List】Select ‘ Internet’；Normally, select ‘ INTERNET’ in the route mode
the network for internet, we have to check ‘VLAN used’ option. If not,
we needn’t check this option, which will be “VLAN transparency” or
“VLAN Unused”
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 12
2.After configuring the parameters of DHCP WAN connection as below, click ‘Create’
to finish the setting：
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 13
5.1.3 Configure Static IP Address WAN Connection for Internet in Route Mode
‘Ipv6’
【Type】Select ‘Static’
【Port Banding】Band the physical ports (LAN1-4 Port ) with Static ip WAN connection.
chapter.
the lan side
【Service List】Select ‘ Internet’；Normally, select ‘ Internet ’ in the route mode
“VLAN Unused”
【IP Address】Set static IP address
【Subnet Mask】Set the mask of static IP address
【Default Gateway】Set the default gateway of static IP address
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 14
【DNS 1】Set static primary DNS address
【DNS 2】Set static secondary DNS address
2. After configuring the parameters of Static IP WAN connection as below, click ‘Create’ to
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 15
5.2 Configure Bridge WAN Connection for Internet
‘Ipv6’
【Type】Select ‘Bridge’
【Port Banding】Band the physical ports (LAN1-4 Port ) with Bridge WAN connection.
chapter.
【Enable DHCP】Not select this option; The function mainly is used to assign IP address
for the lan side
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 16
【Service List】Select ‘ OTHER’；Normally, select ‘ OTHER ’ in the bridge mode
【VLAN Mode】We can set this option according to your network plan. If there is vlan in
“VLAN Unused”
2. After configuring the parameter of Bridge WAN connection as above, click ‘Create’ to
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 17
5.3 View the WAN Connection Status
1．Login ONU WEB, select Status -> Network Interface -> WAN Connection(IPv4). In
here, we can view WAN connection status, check the route WAN connection if it gets an IP
address and Bridge WAN connection if it is UP. As follows:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 18
5.4 Delete the WAN Connection
1．Login ONU WEB, select Network -> WAN -> WAN Connection. Select a WAN
connection from ‘ Connection Name’ and click ‘Delete’ button at the bottom of the page. As
follows:
6 ONU LAN Configuration
6.1 LAN IP Address Configuration

1．Login ONU WEB, select Network -> LAN Configuration -> LAN, and then there are
【 IP address 】 Set local management IP address of ONU. The default IP address is
192.168.101.1
【Subnet Mask】Set the mask of local management IP address of ONU
【Enable DHCP Server】Select Enable or disable ONU DHCP Server function.
【Enable Option125】Keep default configuration
【DHCP Start IP address / End IP address】Configure the IP address interval that allocated
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 19
to the terminal. The address interval must be on the
same network segment as the management IP
address of the ONU.
2．After configuring the parameters of LAN address as above, click ‘Submit’ to finish the
setting
6.2 View LAN Client
1．Login ONU WEB, select Status -> User Information -> Ethernet. View client that
access via LAN ports . As follows:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 20
7 Multicast/IPTV Configuration
7.1 Multicast/IPTV Service Setting

Firstly, configure a bridge WAN connection to carry IGMP/IPTV service according to #5.2
and select ‘Other’ in service mode. After configuring the bridge WAN connection, The
configuration, related to other multicast protocols and multicast vlan, can refer to the following #
7.2- # 7.3 configuration.
7.2 IGMP Snooping Setting

1．Login ONU WEB, select App -> IGMP -> IGMP SNOOPING. Enable or disable IGMP
Snooping function and click ‘Submit’ button to finish the setting as follows:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 21
7.3 IGMP Proxy
1．Login ONU WEB, select App -> IGMP -> IGMP PROXY. Enable or disable IGMP
Proxy function and click ‘Submit’ button to finish the setting as follows:
Note: Normally, IGMP Proxy would be used in route mode and carrying Multicast/IPTV
service, because the ONU would be acted as multicast agent. There isn’t IGMP Proxy concept in
the bridge mode.
7.4 IGMP VLAN Configuration

1．Login ONU WEB, select App -> Normal App -> IPTV, select the corresponding WAN,
click ‘Modify Icon’, then configure multicast vlan, click ‘Modify’ button.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 22
8 WLAN Configuration
8.1 WLAN Basic Configuration
1. Login ONU WEB, select Network->WLAN ->Basic, and then there are some parameters
for us to configure as follows:
【WLAN Enable】Enable or disable the wireless function;
【Mode】The default is Mixed(802.11b+802.11g+802.11n);
【 Band Width 】 It is best to select 20MHz, because many PC don’t support
40MHz;Sometimes, PCs can’t connect to the WIFI if we select 40MHz or
20MHz/40MHz;
【 Channel 】 The default is Auto ； We can select a channel without glitches by manual
according to the surrounding environment;
【SGI Enable】Don’t check, the default GI value 800us;
【Beacon Interval】Choose the default 100ms
【Tx Rate】Choose the default “auto”
【Transmitting Power】Choose the default “100%”;
【QoS Type】Choose the default “WMM”;
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 23
2. After setting wireless configuration, click ‘Submit’ button to finish setting.
8.2 WLAN Password Configuration

1．Login ONU WEB, select Network->WLAN ->Security, then enter this page, user can
configure ‘Auth Type’ , ‘WPA Passphrase’ and “WPA Encryption Algorithm”.
2．After setting wireless password configuration, click ‘Submit’ button to finish setting.
8.3 WLAN Virtual SSID

1．Login ONU WEB, select Network-> WLAN ->SSID Setting, enter this page. We can
turn on or off SSID function, and configure SSID MaxUserNum, and name :
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 24
2．After setting wireless password configuration, click ‘Submit’ button to finish setting.
9 USB Interface Management

9.1 USB Backup Configuration
Select Administration  System Management  USB backup configuration. Enter this
page, first choose the corresponding USB device, second click “Start Backup” button:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 25
9.2 USB Recovery Configuration
Select Administration  System Management  USB recovery configuration. Enter this
page, first check “Enable” button, second click “Submit” button, finally, manually reboot ONU:
10 CATV Configuration
CATV management is mainly applied to ONU with light machine, we need to configure the
ONU optical machine parameters through the ONU’s WEB.
10.1 Configure CATV Port Parameter

1. Select Administration  CATV Mnagement. In this page, we can enable or disable
CATV port. After setting the the parameters, click ‘Submit’ button to finish the setting.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 26
10.2 View CATV Information
1．Login ONU WEB, select Status ->CATV. In this page, we can view the CATV port
status:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 27
11 Voice Service Configuration
11.1 Create Voice WAN Connection
‘Ipv6’
【Type】Select ‘DHCP’ , also can choose other internet type
【Service List】Select ‘ VOICE’ , also choose other service type included ‘VOICE’
【VLAN Mode】We can set this option according to your network plan. If there is vlan in
“VLAN Unused”
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 28
2. After setting voice wan configuration, click ‘Create’ button to finish setting.
11.2 Voice Server IP Configuration

1. Login ONU WEB, select App ->VoIP Configuration -> SIP, and configure voice server
IP Address, other options keep default configurations:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 29
2. After setting voice server IP address configuration, click ‘Submit’ button to finish setting.
11.3 Voice Telephone number and Password Configuration

1. Login ONU WEB, select App->VoIP Configuration->Account Information, first,
choose a voice account, and then click ‘Modify Icon’ button , and type telephone number,
password and name from the pop-up menu. After finishing configurations, then click
‘Modify’ button:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 30
2. After finishing settings, as shown below:
11.4 View Voice Status Information

1. Login ONU WEB, select Status->VoIP Status->Register Status, and then can view
voice register status:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 31
2. Login ONU WEB, select Status->VoIP Status->SIP Account, and then can view voice
SIP Account :
12 TR069 Remote Management

ONU TR069 remote management is mainly used for some network that support TR069
server centralized remote management, the current management is mainly used in many large
networks, ONU as TR069 remote management of the client need to do the following settings.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 32
12.1 Configure Channel for TR069 Remote Management
Firstly, refered to #5.1, set a Route WAN connection with ‘Service List’ as TR069, which is
used to act as a channel for TR069 server.
12.2 TR069 Client Configuration

Login ONU WEB, select Network-> TR-069 -> Acs configuration. In this page, we can set
ONU’s parameter of TR069 client (Username, Password, Access to Onu URL, Access Username
and Access Password).
Note: All of parameters of TR069 are offered by ISP.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 33
13 Device Management
13.1 ONU Device Remote Access Settings

web login ONU and select the Security -> Service Control. In this page you can set
the ONU telnet remote access and WEB remote access:
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 34
13.2 Restore Default Setting
Login the ONU WEB. Select Administration -> System Management -> System
Management. Click ‘Restore Default ’ button. The device will restore the factory defaults after
the application.
13.3 Firmware Upgrade

Login the ONU WEB, Select Administration -> System Management -> Soft Update.
Click ‘select files’ to select firmware file, click ‘Upgrade’ button to upgrade the ONU. After the
application, the device is upgraded to the latest software version.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 35
13.4 Device Reboot
Login the ONU WEB, Select Administration ->System Management->System
Management. Click ‘Reboot’. Restart the device immediately after application.
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 36
Concluding Remarks
Thanks for using products of Shenzhen C-Data Technology Co. Ltd.
Contact Information:
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine
Community，Xili Street, Nanshan District, Shenzhen
Factory Address: 1 floor, Building B, Wentao Industrial Park, Yingrenshi Community,
st
Shiyan Avenue, Baoan District, Shenzhen, China

Telephone: 0755-26014509/26014710/26014711
Fax: 0755-26014506
Email: Marketing@cdatatec.com
www.cdatatec.com.cn
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 37

User Manual: 1GE+1FE+1POTS+WIFI 1GE+3FE+2POTS+1USB+WIFI 1Ge+3Fe+2Pots+1Usb+Wifi+Catv

Uploaded by

Copyright:

Available Formats

User Manual: 1GE+1FE+1POTS+WIFI 1GE+3FE+2POTS+1USB+WIFI 1Ge+3Fe+2Pots+1Usb+Wifi+Catv

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual: 1GE+1FE+1POTS+WIFI 1GE+3FE+2POTS+1USB+WIFI 1Ge+3Fe+2Pots+1Usb+Wifi+Catv

Uploaded by

Copyright:

Available Formats

C-DATA Z_EPON HGU Products

1.1 Installation Precautions

1.2 Precautions for Use

EPON technology is a combination of PON technology and Ethernet technology advantages

of emerging technologies, is a kind of point to multi-point forming technology.High bandwidth,

of the ideal technology.

Note: This manual is written in the form of 1GE+3FE+2POTS+1USB+WIFI+CATV ONU,

2.1 Product Features

2.2 Product Specifications

2.3 Device Interface Definition

2.5 Device Connection

3 Login Web Management Locally

3.1 Physical Connection of ONU and PC

Input UserName：adminisp PasWord： adminisp

4 ONU Register Information Config

4.1 View ONU Register Status

4.2 View ONU Optical Power Information

5.1 Route Mode Configuration

5.1.1 Configure PPPoE WAN Connection for Internet in Route Mode

【Connection name】Select ‘Create WAN Connection’

DHCP WAN connection, and turn on wireless wifi function. When

user configures wifi function, could refer to WLAN configuration this

the lan side

【Service List】Select ‘ INTERNET’；Normally, select ‘ Internet ’ in the route mode

we needn’t check this option, which will be “VLAN Transparency” or

【Vlan ID】Configure this option according to our network plan

vlan planning to configure. The default priority is 0.

【Username】Type PPPoE account, normally offered by ISP, for Internet

【Password】Type PPPoE password, normally offered by ISP, for Internet

【Authentication Type】Select ‘Auto’

【Connection Trigger】Select ‘Always on’

multiple WAN connections at the same time.

【Connection name】Select ‘Create WAN Connection’

DHCP WAN connection, and turn on wireless wifi function. When

user configures wifi function, could refer to WLAN configuration this

the lan side

【Service List】Select ‘ Internet’；Normally, select ‘ INTERNET’ in the route mode

we needn’t check this option, which will be “VLAN transparency” or

【Vlan ID】Configure this option according to our network plan

vlan planning to configure. The default priority is 0.

【Connection name】Select ‘Create WAN Connection’

DHCP WAN connection, and turn on wireless wifi function. When

user configures wifi function, could refer to WLAN configuration this

the lan side

【Service List】Select ‘ Internet’；Normally, select ‘ Internet ’ in the route mode

we needn’t check this option, which will be “VLAN transparency” or

【Vlan ID】Configure this option according to our network plan

vlan planning to configure. The default priority is 0.

【IP Address】Set static IP address

【Subnet Mask】Set the mask of static IP address

【Default Gateway】Set the default gateway of static IP address

【DNS 2】Set static secondary DNS address

multiple WAN connections at the same time.

【Connection name】Select ‘Create WAN Connection’

DHCP WAN connection, and turn on wireless wifi function. When

user configures wifi function, could refer to WLAN configuration this

for the lan side

we needn’t check this option, which will be “VLAN transparency” or

【Vlan ID】Configure this option according to our network plan