Control valves Data Sheet

0 28/10/2013 First issue BSG MLN BRT BSG LVT

Rev. Date Description Revision
Issued Checked Approv. status
THIS PRINT IS PROPERTY OF IDRECO. IT IS NOT TO BE USED
FOR ANY PURPOSE DETRIMENTAL TO THE INTEREST OF
^K9 s.p.A. - Italy THIS CO. IT IS SUBJECTED TO RETURN UPON REQUEST

SAMRA POWER STATION PHASE III KKS Doc. No.

ADD ON COMBINED CYCLE PROJECT 111205-30-GC-MCP-IDR-003

Water & Waste Water Treament Plant IDRECO Doc. No.

2080.MD.0003 Sh. 1 Of 11
IDRECO Job SEPCO Doc. No.
IE-2080
Title:
Control valves Data Sheet

ttV K&M ENGINEERING AND CONSULTING

 SAMPRA POWER STATION PHASE III Idreco doc. n° Idreco Job n°

ADD ON COMBINED CYCLE PROJECT 2080.MD.0003 IE-2080

Custumar code
Water & Waste Water Treatment Plant
111205-30-GC-MCP-IDR-003
Control Valves data sheet
Sh, Of
DATASHEET INDEX

REVISIONS
PAGE DESCRIPTION
0 1 2 3 4
1 Cover page X
2 Index X
3 Control Valve carbonate dosing X
4 Control Valve lime dosing X

5 Control for Sodium Carbonate to Lamellar Clarifier X

6 Control for Lime Milk to Lamellar Clarifier X
7 Control for Raw Water X

8 Control for Concentrate 1st pass X

9 Control for Concentrate 2nd pass X

10 Control for Concentrate 3rd pass X
11 Control for Cleaning Solution X
 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCD232-AA251 Qty.: P&ID REF. 2 0 8 0 . M P . 0 0 0 1 Sh. 01

30GCD231-AA251 Line
Servi e : Sodium carbonate milk dosing to Clarifiers | Fluid Sodium carbonate 2,5%
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 2,0 1,6 0,6
1 Inlet Pressure
Outlet pressure
Kg/cm2g

Kg/cm2g
3,6
1,2 0,6
4,8
1,2
Inlet Temperature (MIN/NORM/MAX) 38 20 15
O Spec Wt / Spec. Grav. / Mol. Wt Kg/dm3 -1,05 1,05 -1,05
o Viscosity / Spoc. Hoots Ratio [cST] 1,62 1,62 1,62
HI
u Vapor pressure Pv Min/Max mmH20

•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / * 85 I *

UJ Pipe line size In Type Pneumatic

Out 2"-PEHD •Mfr & Model

Pipe insulation •Size •
•Type V-Ball On/Off Modulating YES

•Size ASME Class 150 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 6,5 Bar/40 ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANS1150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonnet standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l

% •Packing Material ptfe

ui *TvPe _ Pneumatic + IP converter

•Packing Type V-RIng Set •Mfr & Model

*On Incr. Signal Output Incr./Decr.
•Type Standard (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE

•Balanced / Unbalanced^ unbalanced CO Type/Qty None

•Rated FpCy ui
•Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0

•Stem Material •Mfr & Model

ui
(0
*Set Pressure
V. Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
UI
T h e t e s t s w i l l b e d o n e in a c c o r d a n c e w i t h I T P n° 2 0 8 0 . Q F . 0 0 1 3
UJ
u
o
<
W
_l Notes : (*) Data by manufacturer
<
o
UJ
CL
W
FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n ° 2 0 8 0 . Q F . 0 0 1 3

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCD262-AA251 Qty.: P&ID REF. 2080.MP.0001 Sh. 01
30GCD261-AA251 Line
Service : Lime milk dosing to Clarifiers | Fluid Lime Milk 2,5%
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 0,5 0,3 0,1
1 Inlet Pressure
Outlet pressure
Kg/cm2g
Kg/cm2g
3,6
1,2 0,6
4,8
1,2
Inlet Temperature (MIN/NORM/MAX) 38 20 15
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 -1,05 1,05 -1,05
o Viscosity / Spoe. Hoots Ratio [cST] 1,94 1,94 1,94
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In Type Pneumatic

Out 2"-PEHD •Mfr & Model
Pipe insulation •Size
•Type V-Ball On/Off Modulating YES
•Size ASME Class 150 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 6,5 Bar/40 ° C 'Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal 4-20mA
_l
•Packing Material ptfe OS
% ui *TvPe _ Pneumatic + IP converter
•Packing Type V-RIng Set •Mfr & Model
*On Incr. Signal Output Incr./Decr.
•Type Standard (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE
•Balanced / Unbalanced^ unbalanced CO Type/Qty None
•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
ui
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : (*) Data by manufacturer
<
o
UJ
CL
W
FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCD233-AA251 Qty.: P&ID REF.
1 2080.MP.0001 S h . 05

Line
Service: Sodium Carbonate milk dosing to Lamellar Cl. | Fluid Sodium Carbonate Milk 2,5%
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 0,2 0,1 0,04
1 Inlet Pressure
Outlet pressure
Kg/cm2g
Kg/cm2g
3,6
1,2 0,6
4,8
1,2
Inlet Temperature (MIN/NORM/MAX) 38 20 15
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 -1,05 1,05 -1,05
o Viscosity / Spoe. Hoots Ratio [cST] 1,62 1,62 1,62
UJ
Vapor pressure Pv Min/Max mmH20
u •Required FpCv

1
UJ
•Travel
Allowable / "Predicted SPL dBA 85 I 85 / * 85 I *
(0

UJ Pipe line size In Type Pneumatic

Out 2"-PEHD •Mfr & Model
Pipe insulation •Size •
•Type V-Ball On/Off Modulating YES
•Size ASME Class 150 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 6,5 Bar/40 ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANS1150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material ptfe *TvPe _ Pneumatic + IP converter
% •Packing Type V-RIng Set
ui
•Mfr & Model
*On Incr. Signal Output Incr./Decr.
•Type Standard (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE
•Balanced / Unbalanced^ unbalanced CO Type/Qty None
•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
ui
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : (*) Data by manufacturer
<
o
UJ
CL FIRST ISSUE AGP MLN LVT
W
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCD263-AA251 Qty.: 1 P&ID REF. 2080.MP.0001 Sh. 05
Line
Service : Lime Milk dosing to Lamellar Clarifier | Fluid Lime Milk 2,5%
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 0,2 0,1 0,04
1 Inlet Pressure
Outlet pressure
Kg/cm2g
Kg/cm2g
3,6
1,2 0,6
4,8
1,2
Inlet Temperature (MIN/NORM/MAX) 38 20 15
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 -1,05 1,05 -1,05
o Viscosity / Spoe. Hoots Ratio [cST] 1,94 1,94 1,94
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In Type Pneumatic

Out 2"-PEHD •Mfr & Model
Pipe insulation •Size •
•Type V-Ball On/Off Modulating YES
•Size ASME Class 150 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 6,5 Bar/40 ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material OS
%
ptfe
ui *TvPe _ Pneumatic + IP converter
•Packing Type V-RIng Set •Mfr & Model
*On Incr. Signal Output Incr./Decr.
•Type Standard (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE
•Balanced / Unbalanced^ unbalanced CO Type/Qty None
•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
ui
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : (*) Data by manufacturer
<
o
UJ
CL FIRST ISSUE AGP MLN LVT
W
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCD330-AA251 Qty.: 1 P&ID REF.: 2080.MP.0001 Sh. 01
Line
Service : Raw Water feed | Fluid : Raw Water
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 80,0 50,0 15,00
1 Inlet Pressure
Outlet pressure
Kg/cm2g
Kg/cm2g
1,5
1,0 0,8
2,5
0,5
Inlet Temperature (MIN/NORM/MAX) 38 20 15
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 "1
o Viscosity / Spoe. Hoots Ratio [cST]
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In Type Pneumatic

Out •Mfr & Model
Pipe insulation •Size •
•Type V-Ball On/Off Modulating YES
•Size ASME Class 150 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 10Barg/60°C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material OS
% ptfe
ui *TvPe _ Pneumatic + IP converter
•Packing Type V-RIng Set •Mfr & Model
*On Incr. Signal Output Incr./Decr.
•Type Standard (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE
•Balanced / Unbalanced^ unbalanced CO Type/Qty None
•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
ui
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : (*) Data by manufacturer
<
o
UJ
CL
W
FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCF252-AA251 Qty.: P&ID REF. 2080.MP.0001 Sh. 02

30GCF282-AA251 Line
Service : Concentrate 1st pass regulation | Fluid Concentrate (see note 2)
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 10,2 6,4 1,90
1 Inlet Pressure
Outlet pressure
Kg/cm2g

Kg/cm2g
13,5
2,0
17,8
2,0
22,2
2,0
Inlet Temperature (MIN/NORM/MAX) 20 20 20
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 "1
o Viscosity / Spoc. Hoots Ratio [cST]
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In 1-1/2"- 304 SS 40s Type Pneumatic

Out 1-112"- 304 SS 40s •Mfr & Model
Pipe insulation •Size •
•Type globe On/Off Modulating YES
•Size ASME Class 300 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 45 Barg MO ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI 300*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material ptfe OS
% ui *TvPe _ Pneumatic + IP converter

•Packing Type •Mfr & Model

*On Incr. Signal Output Incr./Decr.
•Type Standard Anti Cavitation Trim Gauges By-pass^
O
•Size lull Rated Travel 0-90' CL *Cam Characteristic
•Characteristic EQUAL PERCENTAGE

•Balanced / Unbalanced^ unbalanced Type/Qty None

ui
•Rated FpCy •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ to
•Stem Material •Mfr & Model
ui
W
*Set Pressure
V. Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
UI
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : 1) (*) Data by manufacturer
< 2) salinity (CI-) 8800 ppm
o 3) Check the valve also for this conditions :
UJ
CL
W P= 15,6 Barg, T=38°C, Q=6,4 mc/h FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCF322-AA251 Qty.: P&ID REF. 2080.MP.0001 S h . 03

30GCF342-AA251 Line
Service : Concentrate 2nd pass regulation | Fluid Concentrate (see note 2)
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 4,5 2,8 0,90
1 Inlet Pressure
Outlet pressure
Kg/cm2g

Kg/cm2g
10,4
3,5
13,7
3,5
17,0
3,5
Inlet Temperature (MIN/NORM/MAX) 20 20 20
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 "1
o Viscosity / Spoc. Hoots Ratio [cST]
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In 1-1/2"- 304 SS 40s Type Pneumatic

Out 1-112"- 304 SS 40s •Mfr & Model
Pipe insulation •Size •
•Type globe On/Off Modulating YES
•Size ASME Class 300 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 45 Barg MO ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316L Stainless Steel Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI 300*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube
_l Input Signal iz^J^
•Packing Material ptfe OS
% ui *TvPe _ Pneumatic + IP converter

•Packing Type •Mfr & Model

*On Incr. Signal Output Incr./Decr.
•Type Standard Anti Cavitation Trim Gauges By-pass^
O
•Size lull Rated Travel 0-90' CL *Cam Characteristic
•Characteristic EQUAL PERCENTAGE

•Balanced / Unbalanced^ unbalanced Type/Qty None

ui
•Rated FpCy •Mfr & Model
•Plug / Ball / Disk Material 316L Stainless Steel Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ to
•Stem Material •Mfr & Model
ui
(0
*Set Pressure
V. Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
UI
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : 1) (*) Data by manufacturer
< 2) salinity (CI-) 900 ppm
o 3) Check the valve also for this conditions :
UJ
CL
W P= 7,9 Barg, T=38°C, Q=2,8 mc/h FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GDF252-AA251 Qty.: P&ID REF. 2080.MP.0001 Sh. 05
30GDF282-AA251 Line
Service : Concentrate 3rd pass regulation | Fluid Concentrate (see note 2)
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 5,3 3,3 1,1
1 Inlet Pressure
Outlet pressure
Kg/cm2g
Kg/cm2g
21,8
4,0
28,7
4,0
30,0
4,0
Inlet Temperature (MIN/NORM/MAX) 20 20 20
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 "1
o Viscosity / Spoc. Hoots Ratio [cST]
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UJ Pipe line size In 1" - ASTMA790 Duplex 40s Type Pneumatic

Out J^ASTMA7yODuplo(4^ •Mfr & Model
Pipe insulation no •Size •
•Type globe On/Off Modulating YES
•Size ASME Class 300 Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 45 Bar/ 40 ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. Duplex Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI 300*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material OS
% ptfe
ui *TvPe _ Pneumatic + IP converter
•Packing Type •Mfr & Model
*On Incr. Signal Output Incr./Decr.
•Type Standard Anti Cavitation Trim (0 Gauges By-pass^
•Size lull Rated Travel 0-90' O *Cam Characteristic
CL
•Characteristic EQUAL PERCENTAGE
•Balanced / Unbalanced^ unbalanced CO Type/Qty None
•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material Duplex Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0
ui
The tests will be done in accordance with ITP n° 2080.QF.0013
UJ
u
o
<
W
_l Notes : 1) (*) Data by manufacturer
< 2) salinity (CI-) 12600 ppm
o 3) Check the valve also for this conditions :
UJ
CL
W P= 27,4 Barg, T=38°C, Q=3,3, mc/h FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n° 2080.QF.0013

 Samra power Station Phase III
Add On Combined Cycle Project
Water & waste water treatment plant
Customer Code: 111205-30-GC-MCP-IDR-003 IDRECO No. 2080.MD.0003

CONTROL VALVE DATA SHEET

VALVE ITEM : 30GCN500-AA251 Qty.: 1 P&ID REF. 2080.MP.0001 Sh. 04
Line
Service : Control for Cleaning Solution | Fluid Cleaning solution (see note 2)
Units Max flow Norm. Flow Min Flow Shut-Off
FLOW RATE m3/h 45,0 36,0 28,0
1 Inlet Pressure
Outlet pressure
Kg/cm2g

Kg/cm2g
2,5
2,0
2,5
2,0
2,5
2,0
Inlet Temperature (MIN/NORM/MAX) 20 20 20
O Spec. Wt / Spec. Grav. / Mol. Wt Kg/dm3 "1
o Viscosity / Spoc. Hoots Ratio [cST]
HI
u Vapor pressure Pv Min/Max mmH20
•Required FpCv
1
UJ
•Travel
(0 Allowable / "Predicted SPL dBA 85 I 85 / 85 I *

UI Pipe line size In 4"-PVC Type Pneumatic

Out 4--PVC •Mfr & Model
Pipe insulation •Size •
•Type Butterfly On/Off Modulating YES
•Size ASME Class Spring Action Open / Close air to open / fail to close
Max Press / Te mp. 7 Barg / 50 ° C •Max Allowable Pressure [Kg/cm2]
O
UJ
•Mfr& Model * *Min Required Pressure [Kg/cm \
•Body/Bonnet Mat. 316 SS Available Air Supply Pressure
O •Liner Material MD Not Applicable Max [Kg/crrTL 7 Min. [Kg/crrfL
CD End In Wafer for Flanges <
? Connection Out ANSI150*
D Fig Face Finish RF
o EndExt/Mat.
CO •Flow Direction One way
UJ
•Type of Bonne t standard
> Lub. & Iso Valve Lube Input Signal iz^J^
_l
•Packing Material ptfe OS
% ui *TvPe _ Pneumatic + IP converter

•Packing Type •Mfr & Model

*On Incr. Signal Output Incr./Decr.
•Type Standard Gauges By-pass^
O
•Size lull Rated Travel 0-90'
CL *Cam Characteristic
•Characteristic EQUAL PERCENTAGE

•Balanced / Unbalanced^ unbalanced CO Type/Qty None

•Rated FpCy ui •Mfr & Model
•Plug / Ball / Disk Material 316 S S Contacts / Rating
•Seat Material Actuation Points
•Cage / Guide Material^ (0
•Stem Material •Mfr & Model
ui
to *Set Pressure
Filter Included Gauge included
NEC Class Group Div <
•Hydro pressure YES
o ASME / FCI Leakage Class
to
« (0 T h e t e s t s w i l l b e d o n e in a c c o r d a n c e w i t h I T P n° 2 0 8 0 . Q F . 0 0 1 3
UJ ui
u
o
<
W
_l Notes : 1) (*) Data by manufacturer
< 2) Cleaning Solution, acid or alcaline pH 2-12
o
UJ
CL
W
FIRST ISSUE AGP MLN LVT
REV DATE REVISION PREP CHK APPR

APPLICABLE SPECIFICATIONS : I.T.P. n ° 2080.QF.0013