Abs Submersible Sewage Pump XFP 80C - 151e (GB)
Abs Submersible Sewage Pump XFP 80C - 151e (GB)
Abs Submersible Sewage Pump XFP 80C - 151e (GB)
Features
□ The water-pressure-tight, encapsulated, fully flood-proof
motor and the pump section form a compact, robust,
modular construction.
□ NEMA Class A temperature rise.
□ Premium Efficiency Motors in accordance with IEC 60034-30
level IE3 with testing in accordance with IEC60034-2-1.
□ Continuously rated motor in submerged and non-submerged
applications.
□ Double mechanical seals; SiC-SiC at the medium side, SiC-C at
the motor. All seals are independent of rotation direction and
resistant to temperature shock.
□ Anti-wicking cable plug solution.
□ High-efficiency hydraulic design with Contrablock (80E & 151E)
or Contrablock Plus (80C, 100C, 100E & 150E) impeller.
□ Free solids passage of 75 mm.
□ Lubricated-for-life bearings with a calculated life time of
min. 50,000 hours.
□ Stainless steel shaft. Designed with high safety factor
to prevent fatigue fracture.
□ Temperature monitoring by thermal sensors (140 °C) in the
stator windings.
□ Seal monitoring by a moisture probe (DI) in the seal chamber Motor
which signals an inspection alert if there is leakage at the Premium Efficiency IE3, three-phase, squirrel-cage motor;
shaft seals. 400 V; 50 Hz; 2-pole (2900 r/min), 4-pole (1450) and 6-pole (980).
□ Smooth outer design to reduce rag build-up.
□ Stainless steel lifting hoop. Protection type IP 68, with stator insulation Class H.
□ DN 80, DN 100 and DN 150 radial slot DIN flange discharge.
□ Maximum allowable temperature of the medium for continuous Start-up: 1.3 - 2.9 kW = direct on line (DOL).
operation is 40 °C. 4.0 - 11.0 kW = star-delta (YΔ).
□ Maximum submergence depth of 20 m.
□ Explosion-proof as standard, in accordance with Motors with other operating voltages and frequencies are
international standards EExd II BT4 and ATEX. also available.
Technical Data
XFP Motor Impeller Rated Motor power* Rated Speed Cable Weight
size voltage (kW) current size
(V) P1 P2 (A) (r/min) (kg)
80C-CB1 PE29/4 2 400 3~ 3.4 3.0 6.4 1450 7G1.5 94
PE22/4 3, 4 400 3~ 2.5 2.2 4.6 1450 7G1.5 91
PE13/6 1, 2, 4 400 3~ 1.6 1.3 3.6 980 7G1.5 89
100C-CB1 PE29/4 2 400 3~ 3.4 3.0 6.4 1450 7G1.5 98
PE22/4 3, 4 400 3~ 2.5 2.2 4.6 1450 7G1.5 96
PE13/6 1, 2, 4 400 3~ 1.6 1.3 3.6 980 7G1.5 94
80E-CB1 PE110/2 1, 2, 3 400 3~ 12.1 11.0 20.1 2900 10G1.5 166
ABS submersible sewage pump XFP 80C-151E GB 10.2009 ABS reserves the right to alter specifications due to technical developments.
PE70/2 4 400 3~ 7.7 7.0 13.5 2900 10G1.5 153
100E-CB1 PE90/4 1, 2 400 3~ 10.0 9.0 18.1 1450 10G1.5 178
PE60/4 3, 4 400 3~ 6.7 6.0 13.6 1450 10G1.5 167
150E-CB1 PE90/4 1, 2 400 3~ 10.0 9.0 18.1 1450 10G1.5 184
PE60/4 3, 4 400 3~ 6.7 6.0 13.6 1450 10G1.5 171
PE40/4 5 400 3~ 4.4 4.0 8.4 1450 10G1.5 153
151E-CB2 PE90/4 1 400 3~ 10.0 9.0 18.1 1450 10G1.5 188
PE60/4 3 400 3~ 6.7 6.0 13.6 1450 10G1.5 177
PE40/4 5 400 3~ 4.4 4.0 8.4 1450 10G1.5 158
* P1 = power at mains. P2 = power at motor shaft.
Materials Materials
Description Material Description Material
Motor housing Cast iron EN-GJL-250 Motor shaft Stainless steel 1.4021 (AISI 420)
Volute Cast iron EN-GJL-250 Lifting hoop Stainless steel 1.4401 (AISI 316)
Impeller Cast iron EN-GJL-250 Fasteners Stainless steel 1.4401 (AISI 316)
Bottom plate Cast iron EN-GJL-250
ABS Group, Roskildevägen 1, Box 394, SE-201 23 Malmö, Sweden, Tel +46 40 35 04 00, Fax +46 40 30 50 45
www.absgroup.com