Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Subject: Declaration of Compliance To The Requirements of 15.121

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong

Date: 25 November 2019


Federal Communication Commission
Authorization and Evaluation Division

FCC ID: 2AJGMBF-H6

Subject: Declaration of compliance to the requirements of §15.121

We declare that, this scanning receiver is incapable of operating (tuning), or readily being
altered by the users to operate, within the frequency bands allocated to the Cellular
Radiotelephone Service in part 22 of this chapter (cellular telephone bands).

This device will not be able to receive transmissions in the cellular telephone bands by
means of clipping the leads of, or installing, a simple component such as a diode, resistor or
jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip
using special access codes or an external device, such as a personal computer.

This device is also incapable of converting digital cellular communication transmissions to


analog voice audio.

This device is designed so that the tuning, control and filtering circuitry is inaccessible.
Any attempts to modify the equipment to receive transmissions from the Cellular
Radiotelephone Service will render the receiver inoperable.

This scanning receiver rejects any signals from the Cellular Radiotelephone Service
frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement.

We are aware that the modification of this device to receive transmissions from Cellular
Radiotelephone Service frequency bands will be considered to constitute manufacture of
such equipment. This includes any individual, individuals, entity or organization that modifies
one or more scanners. Any modification to receive transmissions from the Cellular
Radiotelephone Service frequency bands voids the certification of the scanning receiver,
regardless of the date of manufacture of the original unit.

If you have any questions, please feel free to contact me.

Thank you.

Sincerely,

Signatory
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY


Contact person: Peter Wang

You might also like