PRODUCT DATASHEET

APXVBB26X-C-I20

RF X-TREMEŒ4-port Antenna, 694-960 / 694-960 MHz, 65deg, 17.0 / 17.0 dBi, VET, 0-10° /
0-10°, 2.6m

FEATURES / BENEFITS

This antenna provides a 4-port multi-band flexible platform for advanced use in low bands.

4 ports / 2 cross pol systems in low band

Integrated RET platform and manual overdrive
Slim radome design for optimum windload
MIMO 4x4 for 700, 800 or 900MHz applications

Technical Features

R1
Frequency Band Mhz 694-803 790 - 862 880 - 960
Polarization - Slant +/- 45 Slant +/- 45 Slant +/- 45
Gain dBi 15.8 16.5 17
VSWR - <1.5:1 <1.5:1 <1.5:1
Return Loss dB >14 >14 >14
Cross Polar Isolation dB >28 >28 >28
Azimuth Beamwidth 3dB Deg 73 +/- 4 68 +/- 4 65 +/- 4
Cross Polar Discrimination at
dB 23 24 25
Boresight
Cross Polar Discrimination
dB 10 10 6
over Sector
Azimuth BW 10 dB Deg 136 +/- 7.5 130 +/- 5.0 124 +/- 5.0
F/B at +/-30 Copolar dB 25 25 25
F/B at +/-30 Crosspolar dB 21 22 23
F/B at +/-30 Total Power dB 20 21 22
Elevation Beamwidth 3 dB Deg 8.3 +/- 1 7.8 +/- 0.8 6.9 +/- 0.8
Electrical Downtilt Deg 0 to 10 0 to 10 0 to 10
Elevation Downtilt Deviation Deg <0.7 <0.7 <0.7
Upper Side Lobe
dB >15 >15 >15
Suppression Peak to +20
Impedance Ohms 50 50 50
Passive Intermodulation dBc <-153 <-153 <-153
Maximum Effective Power
Watts 500 500 500
per Port

APXVBB26X-C-I20 REV: B REV DATE: 14.12.2016 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 3
PRODUCT DATASHEET
APXVBB26X-C-I20

RF X-TREMEŒ4-port Antenna, 694-960 / 694-960 MHz, 65deg, 17.0 / 17.0 dBi, VET, 0-10° /
0-10°, 2.6m

R2
Frequency Band Mhz 694-803 790 - 862 880 - 960
Polarization - Slant +/- 45 Slant +/- 45 Slant +/- 45
Gain dBi 15.8 16.5 17
VSWR - <1.5:1 <1.5:1 <1.5:1
Return Loss dB >14 >14 >14
Cross Polar Isolation dB >28 >28 >28
Azimuth Beamwidth 3dB Deg 73 +/- 4 68 +/- 4 65 +/- 3
Cross Polar Discrimination at
dB 23 24 25
Boresight
Cross Polar Discrimination
dB 10 10 6
over Sector
Azimuth BW 10 dB Deg 136 +/- 7.5 130 +/- 5.0 124 +/- 5.0
F/B at +/-30 Copolar dB 25 25 25
F/B at +/-30 Crosspolar dB 21 22 23
F/B at +/-30 Total Power dB 20 21 22
Elevation Beamwidth 3 dB Deg 8.3 +/- 1 7.8 +/- 0.8 6.9 +/- 0.8
Electrical Downtilt Deg 0 to 10 0 to 10 0 to 10
Elevation Downtilt Deviation Deg <0.7 <0.7 <0.7
Upper Side Lobe
dB >15 >15 >15
Suppression Peak to +20
Impedance Ohms 50 50 50
Passive Intermodulation dBc <-153 <-153 <-153
Maximum Effective Power
Watts 500 500 500
per Port

ELECTRICAL SPECIFICATIONS
Impedance Ohm 50.0
Polarization Deg ±45°

MECHANICAL SPECIFICATIONS
Dimensions - H x W x D mm (in) 2690 x 499 x 215 (103.2 x 17.7 x 8.5)
Weight (Antenna Only) kg (lb) 43.7
Weight (Mounting Hardware kg (lb) 47
only)
Packing size- HxWxD mm (in) 2830 x 573 x 435 (110.2 x 22.4 x 13.8)
Shipping Weight kg (lb) 53.3
Connector type 4 x 4.3-10 Female at bottom + 2 AISG connectors (1 male, 1 female)
Adjustment mechanism Integrated Ret solution AISG 1.1 and 2.0 compliant with manual overdrive
Mounting Hardware Diecast Aluminium and Galvanized steel
Material
Radome Material / Color Fiber Glass / Light Grey RAL7035

TESTING AND ENVIRONMENTAL

Temperature Range °C (°F) -40 to 60 (-40 to 140 )
Lightning protection Direct Ground
Ingress protection Sand free
Survival Wind Velocity km/h 200.0
Wind Load @150 Km/h N 1434.0
Front
Wind Load @150 Km/h Side N 619.0
Wind Load @150 Km/h Rear N 1518.0
Environmental ETSI 300-019-2-4 Class 4.1E

APXVBB26X-C-I20 REV: B REV DATE: 14.12.2016 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 3
PRODUCT DATASHEET
APXVBB26X-C-I20

RF X-TREMEŒ4-port Antenna, 694-960 / 694-960 MHz, 65deg, 17.0 / 17.0 dBi, VET, 0-10° /
0-10°, 2.6m

APXVBB26X-C-I20 Front Panel APXVBB26X-C-I20 Antenna Array

ORDERING INFORMATION
Order No. Configuration Mounting Hardware Mounting pipe Diameter Weight
APXVBB26X-C Manual tilt control APM40-2 Beam tilt kit 60-120mm 43,7 kg
APXVBB26X-C-I20 Internal RET included APM40-2 Beam tilt kit 60-120mm 47 kg

External Document Links Notes

APM40 Series Installation Instructions Please note: RET upgrades not available for APXVBB26X-C - please order the APXVBB26X-C-I20
Manual Overdrive Instructions
Available Configurations
APXVBB26X-C - No ACU included - weight 43,7 Kg
APXVBB26X-C-I20 - (2) Pre-commissioned, integrated ACUs included - weight 47 Kg
For additional mounting information please click "External Document Links".

External Link Reference

APXVBB26X-C-I20 REV: B REV DATE: 14.12.2016 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 3 of 3