Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Week 4 - Problem Set Assignment

    Uploaded by

    nacer zidi
    This document provides instructions for a problem set assignment to assemble the lower frame of an automotive seat in Autodesk Inventor. Students are provided 74 component files to construct the assembly and constrain it. They must then adjust the seat height and measure distances in both raised and lowered positions, inputting the values into custom properties for grading. A DWF file of the lowered assembly is also required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Week 4 - Problem Set Assignment

    Uploaded by

    nacer zidi
    61 views5 pages
    This document provides instructions for a problem set assignment to assemble the lower frame of an automotive seat in Autodesk Inventor. Students are provided 74 component files to construct the assembly and constrain it. They must then adjust the seat height and measure distances in both raised and lowered positions, inputting the values into custom properties for grading. A DWF file of the lowered assembly is also required.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for a problem set assignment to assemble the lower frame of an automotive seat in Autodesk Inventor. Students are provided 74 component files to construct the assembly and constrain it. They must then adjust the seat height and measure distances in both raised and lowered positions, inputting the values into custom properties for grading. A DWF file of the lowered assembly is also required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views5 pages

    Week 4 - Problem Set Assignment

    Uploaded by

    nacer zidi
    This document provides instructions for a problem set assignment to assemble the lower frame of an automotive seat in Autodesk Inventor. Students are provided 74 component files to construct the assembly and constrain it. They must then adjust the seat height and measure distances in both raised and lowered positions, inputting the values into custom properties for grading. A DWF file of the lowered assembly is also required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    ME 24-688 – Week 4

    Problem Set Assignment

    1 Assemble Automotive Lower Seat Frame


    The week four problem set assignment focuses on the assembly environment of Autodesk Inventor. The
    goal of the assignment is to construct the lower frame assembly of the automotive seat with provided
    components. Once the assembly is constrained the seat pan can be raised and lowered by adjusting the
    ball screw drive motors mounted on the frame.

    1.1 Provided Items


    To start the assignment you are provided 74 files consisting of Autodesk Inventor part and assembly files
    in a ZIP file. Week 4 Problem Set Instructions.mp4 is a video showing the general placement and
    relationships of the component to help assemble the complete lower frame. Using the provided files you
    can build the assembly then adjust the height position of the power seat.

    Use the Standard (mm).iam template for all assemblies required for this problem set. Set the Top Back
    Left Corner as the Home View.

    ME 24-688 – Introduction to CAD/CAE Tools Page 1 of 5


    ME 24-688 – Week 4
    Problem Set Assignment

    1.2 Final Deliverable


    Once the main assembly is complete you will need to provide a DWF file in the Lowered position of the
    assembly. (See the Appendix at the end of this document for the steps to create a DWF) Then adjust the
    seat height position using the setup dimensions below and provide the measured value as noted for each
    setup in a custom iProperty.

    Lower Frame Setup - Raised


     Front = 95 mm
     Back = 90 mm
     Value = XXX.XXX mm

    Lower Frame Setup - Lowered


     Front = 70 mm
     Back = 80 mm
     Value = XX.XX mm

    Measure the distance from the center of the back hole as noted below and the bottom face of the seat rail
    track for each setup.

    ME 24-688 – Introduction to CAD/CAE Tools Page 2 of 5


    ME 24-688 – Week 4
    Problem Set Assignment
     Use the following naming convention for the top level assembly:

    ps4_your_andrew_id

    1.3 Grading
    Grading for this problem set will be based on the following elements:
     85% - Correctly identify the values for the Raised and Lowered positions below
     10% - File Count
    o There should be 133 Total files and 73 Unique files

     5% - Assembly iProperty population


    o Author, Designer and Description
    o Custom iProperties (Lowered Position Value and Raised Position Value)

     Up to 10% Extra credit for creating a Raised and Lowed Positional Representation in the
    assembly

    ME 24-688 – Introduction to CAD/CAE Tools Page 3 of 5


    ME 24-688 – Week 4
    Problem Set Assignment

    1.4 Appendix – DWF Export


    The following images show the steps to export a DWF file.

    ME 24-688 – Introduction to CAD/CAE Tools Page 4 of 5


    ME 24-688 – Week 4
    Problem Set Assignment

    ME 24-688 – Introduction to CAD/CAE Tools Page 5 of 5

    You might also like