查询"RF-5800H-MP"供应商

assuredcommunications®

RF-5800H-MP
advanced hf/VHF

tactical radio

system

A fully integrated, compact The RF-5800H-MP is a member of the FALCON II® family of multiband tactical
radio systems. It is an advanced HF-SSB/VHF-FM manpack radio that provides
communications system reliable tactical communications through enhanced secure voice and data
performance, networking, and extended battery life. The transceiver’s extended
frequency range (to 60 MHz) provides secure FSK 16 kbps CVSD voice and data
offering the security and
in the VHF band in addition to the HF capability. It is like having two radios in
one compact package.
performance features that
High speed data rates up to 9600 bps (HF) and selectable ARQ modes reduce
missions demand on-the-air transmission time and enhance secure data transmissions for
improved communications reliability and throughput. The combined robust
digital voice (MELP, LPC-10) and serial tone data modem operate over poor
communication channels. The RF-5800H-MP includes a last ditch voice
mode and SMS-like messaging that transmit digitally, using ultra robust 3G
waveforms for operation in channels where legacy waveforms will not work.
A serial-tone ECCM waveform with DSP-based excision filtering and a 600 bps
vocoder are combined to provide reliable, secure HF communications in the
presence of jamming. Secure digital voice, 75 to 2400 bps data, and ARQ mode
are supported in the ECCM mode.
The latest third generation HF Link Automation, STANAG 4538, is included
and provides high-performance ALE and data link protocols to deliver superior
linking and error-free data transfer.
The Harris Citadel® ASIC provides high-speed data and digital voice encryption
using either a Harris-standard or a customer-unique algorithm.
An internal Global Positioning System (GPS) receiver option provides local
position information and Automatic Position Reporting (APR). This feature
allows the radio to be used in situational awareness systems without PCs
attached to the outstation radios. The accurate GPS timing data can be used
for ECCM and advanced ALE synchronization.
Integrated telephony capability allows the radio operator to place and
receive telephone calls using the radio keypad when used with the
RF-6010 Tactical Network Access Hub.
The data capability and network management features of the
RF-5800H-MP utilize industry standard IP-based protocols
to provide fast, simple, and direct communications,
and permit easy setup and maintenance of tactical
networks.
The removable Keypad/Display Unit provides easy access to
controls for on-the-move operation.
 查询"RF-5800H-MP"供应商

Specifications for the RF-5800H-MP

General Environmental
Frequency Range 1.6-59.999 MHz Test Method Per MIL-STD-810F
Net Presets 75, fully programmable Vibration Ground tactical
Frequency Stability ±0.5 x 10 –6 Immersion 3 ft. (.9m) of water
J3E (single sideband, upper or lower, suppressed Operating Temperature –40˚ to +70˚C
carrier telephony)
H3E (compatible AM single sideband plus full
Emission Modes
carrier) Features
A1A, J2A (compatible CW), selectable; F3E (FM
HF: MIL-STD-188-110B App. C (9600 bps and
telephone)
12,800 bps uncoded), App. B 39-tone (2400 bps),
RF Input/Output (maximum data rate)
50 ohm nominal, unbalanced
Impedance Encrypted Data Serial Tone (2400 bps), STANAG 4285 (2400 bps),
STANAG 4415 (75 bps), STANAG 4539 (9600 bps),
Power Input 26 VDC (20.5-32 VDC)
FSK (600 bps)
Synchronous or asynchronous (RS-232C; VHF: FSK (16 kbps)
Data Interface
MIL-STD-188-114A)
Automatic Link STANAG 4538 FLSU, MIL-STD-188-141B
Dimensions 10.5 W x 3.5 H x 13.2 D in. Establishment (ALE) Appendix A
(with battery case) (26.7 W x 8.1 H x 34.3 D cm)
Frequency Hopping Serial Tone ECCM
Radio Weight 10 lbs. (4.7 kg) without batteries
HF: LPC-10-52E (600/2400), MELP (600/2400),
Vocoder
VHF: CVSD
Receiver Data Link Layer
STANAG 4538 (3G), pFED-STD-1052
Protocol (ARQ)
Sensitivity SSB: –113 dBm (0.5 µV) for 10 dB SINAD
Audio Output 15 mW at 1000 ohm to external handset
Squelch Front panel adjustable, active squelch selectable System Configuration
IF Rejection Greater than 80 dB Digital Encryption GPS

Image Rejection Greater than 80 dB (1st IF image) RF-5800H-MP025 Citadel —

AGC Mode dependent, automatically selected RF-5800H-MP026 Citadel Internal
Intermodulation –80 dB or better for two –30 dBm signals RF-5800H-MP035 Datotek/Citadel —
Distortion separated 30 kHz or more
RF-5800H-MP036 Datotek/Citadel Internal
Overload Protection Receiver protected to 32 VRMS
RF-5800H-MP065 AES/Citadel —
RF-5800H-MP066 AES/Citadel Internal
Transmitter
1, 5, 20 watts PEP/Average -1/+2 dB
Power Output
(1, 5, 10 watts FM) Major System Components
 .5 mV at 150 ohm or 0 dBm at 600 ohm for full
1 RF-5800H-V006 20-Watt Vehicular Adapter
Audio Input
rated output
RF-5832H 125-Watt Power Amplifier
Carrier Suppression Greater than 60 dB below PEP output (J3E mode)
RF-5833H 150-Watt Vehicular Adapter Unit
Undesired Sideband
Greater than 60 dB below PEP output
Suppression RF-5834H 400-Watt Power Amplifier
Spurious Outputs RF-5382H 150-Watt Antenna Coupler
–50 dB relative to rated output, except harmonics
(Greater than 20 kHz
which are –40 dB minimum for f = 1.6-30 MHz
o
RF-382A 400-Watt Antenna Coupler
from Fc)
OE-505 10-foot (3 m) whip (1.6-60 MHz) RF-5845H Pre/Postselector
Antenna Tuning
RF-1936P (AS-2259) NVIS (3.5-10 MHZ)
Capability
RF-1940-AT001/RF-1941 dipole

RF Communications | 1680 University Avenue | Rochester, NY USA 14610

www.harris.com | 1-585-244-5830
Specifications are subject to change without notice. © Copyright 2009 Harris Corporation 02/09 DS-211L
查询"RF-5800H-MP"供应商

This datasheet has been downloaded from:

www.EEworld.com.cn

Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn

All Datasheets Cannot Be Modified Without Permission

Copyright © Each Manufacturing Company