530-550Watt

144 HALF-CELL MONO PERC MODULE

• AE14HXXXVHC10B

Special Cell Design

10B technology decreases the distance between bus
bars and finger grid line which is benefit to power
increase. Half-cell aims to eliminate the cell gap to
increase module efficiency.

IP68 Rated Junction Box

The IP 68 rated junction box ensures an outstanding
waterproofing, supports installation in all orientations
IP68 with less stress on the cables. Highly reliable
performance with low resistance connectors ensures
maximum output for higher energy production.

High module conversion efficiency

Module efficiency up to 21.28 % achieved through
High advanced cell technology and manufacturing
Efficiency
Trust Anchor to Deliver Reliable Performance Over Time process

• World-class manufacturer of crystalline silicon photovoltaic modules

Anchor current sorting process
• Rigorous quality control meeting the highest international standards: Up to 2 % power loss caused by current mismatch
ISO 9001, ISO 14001 and ISO17025
could be diminished by current sorting technique
• Regular independently checked production process from international to maximize system power output
accredited institute/company
• Tested for harsh environments
• Long-term reliability tests Excellent weak light performance
• 2 × 100% EL inspection ensuring defect-free modules More power output in weak light condition, such as
Weak light haze, clouds, early and late sun hours

Industry-leading Warranty based on nominal power Lower operating temperature

Lower operating temperature and temperature
• 98% in the first year; thereafter, for years two (2) through twenty five (25), coefficient increases the power output
0.55% maximum decrease from MODULE'S nominal power output per year, ending
with the 84.8% in the 25th year after the defined WARRANTY STARTING DATE.
• Product Warranty is of 12 Years**
Extended wind and snow load tests
• 25 year linear performance warranty
Module certified to withstand extreme wind
Industry leadi 2400Pa (2400 Pascal) and snow loads (5400 Pascal) *
100 % ng linear powe 5400Pa
r warranty
Warranted Power Output

98 %

84.8 % Withstanding Harsh Environment

80.2 %
Reliable quality leads to better sustainability
even in harsh environment like desert and
0 1 12 25 coastal area
Anchor linear warranty Standard linear warranty

Certifications and standards:

IEC 61215, IEC 61730, IEC 61701, IEC 62804,
IEC 62716, IEC 60068

* Please refer to PLSIND Standard Module Installation Manual for details. ** Please refer to PLSIND Product Warranty for details.

E-mail: solar@in.panasonic.com Doc No : Anchor_Mono Perc_144_530-545Wp_Do_Rev(P)_Rev01_02.05.22 www.Isin.panasonic.com

 • AE14HXXXVHC10B

Electrical Characteristics

STC AE14HxxxVHC10B
Wattage, Wp 530W 535W 540W 545W 550W
Voltage at Max Power, Vmax 41.84V 41.88V 41.92V 41.96V 41.95V
Open Circuit Voltage, Voc 49.32V 49.36V 49.40V 49.44V 49.80V
Current at Max Power, Imax 12.67A 12.77A 12.88A 12.99A 13.12A
Short Circuit Current, Isc 13.49A 13.60A 13.72A 13.83A 13.98A
Module Efficiency 20.51% 20.70% 20.89% 21.09% 21.28%
Operating Temperature (OC) -40OC ~ +85OC
Maximum System Voltage 1500 V DC (IEC)
Maximum Series Fuse Rating 25 A
Power Tolerance -0, +5Wp

STC: lrradiance 1000 W/m2, Cell Temperature 25°C, AM=1.5

# PLSIND reserves the right to adjust the listed parameters without notice.

NOCT AE14HxxxVHC10B
Maximum Power at NOCT, Wp 390W 394W 397W 401W 405W
PV Module : AE14H550VHC10B 38.78V 38.81V 38.85V
Voltage at Max Power, Vmax 38.89V 38.93V
Open Circuit Voltage, Voc 46.38V 46.42V 46.46V 46.49V 46.53V
Current at Max Power, Imax 10.05A 10.14A 10.22A 10.31A 10.39A
Short Circuit Current, Isc 10.77A 10.86A 10.95A 11.04A 11.13A
NOCT: Irradiance 800 W/m2, ambient temperature 20 °C, AM=1.5, wind speed 1 m/s.
Current (A)

# PLSIND reserves the right to adjust the listed parameters without notice.

Temperature Characteristics
Temperature Coefficient of Pmax(γ) -0.35 %/°C
Temperature Coefficient of Voc(β) -0.30 %/°C
Voltage (V) Temperature Coefficient of Isc(α) 0.06 %/°C
Current vs Voltage Curve Nominal Module Operating Temperature (NMOT) 45±2°C

PV Module : AE14H550VHC10B

Mechanical Characteristics
Cell Type Mono PERC 91mm * 182mm
No.of Cells 144 (12x6 || 12x6)
Dimensions 2279 × 1134 × 35 mm
Power (W)
Power (W)

Weight 29 kg
Front Glass 3.2mm, High Transmission, Low Iron, Tempered glass
Frame Anodized aluminium alloy
Junction Box 3 Split, IP68 Rated
Output Cables 4.0mm2
Portrait: (-)350 mm and (+) 160 mm in Length
Voltage (V) Landscape: (-)1400 mm and (+)1400 mm
Power vs Voltage Curve in Length or Customized Length
Connectors MC4 Compatible

Dealer Information Packing Configuration

Container 20' GP 40' GP
Pieces per pallet 31 31
Pallets per container 8 18
Pieces per container 248 558

# PLSIND stands for Panasonic Life Solutions India Pvt. Ltd.

Panasonic Life Solutions India Pvt. Ltd.

Registered Office : 12th Floor, Ambience Tower, Ambience Island, NH-48, Gurugram, Haryana - 122 002.
In case of consumer complaints contact: 3rd Floor, B Wing, I-Think Techno Campus, Pokhran Road No 2, Thane (west) - 400607, Maharashtra.
T: (9122) 42228888 I F: (9122) 42228888 | Customer care no.: (022) 41304130 | WhatsApp No: 91360 28606
Email: solar@in.panasonic.com | www.lsin.panasonic.com

Information on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may
vary slightly. All specifications are in accordance with standard EN 50380. Color differences of the modules relative to the figures as well as discolorations of/in the modules which do not impair their proper
functioning are possible and do not constitute a deviation from the specification.