Professional Documents
Culture Documents
BE Civil
BE Civil
I. Gain knowledge and skills in Civil engineering which will enable them to have a careerand
professional accomplishment in the public or private sector organizations
II. Become consultants on complex real life Civil Engineering problems related to
Infrastructure development especially housing, construction, water supply, sewerage,
transport, spatial planning.
III. Become entrepreneurs and develop processes and technologies to meet desired infrastructure
needs of society and formulate solutions that are technically sound, Economically feasible,
and socially acceptable.
IV. Perform investigation for solving Civil Engineering problems by conducting researchusing
modern equipment and software tools.
V. Function in multi-disciplinary teams and advocate policies, systems, processes and
equipment to support civil engineering
1
7 Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the knowledge of, and
need for sustainable development.
8 Ethics: Apply ethical principles and commit to professional ethics and responsibilities and
norms of the engineering practice.
9 Individual and team work: Function effectively as an individual, and as a member
or leader in diverse teams, and in multidisciplinary settings.
10 Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend and
write effective reports and design documentation, make effective presentations, and give
and receive clear instructions.
11 Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member
and leader in a team, to manage projects and in multidisciplinary environments.
12 Life-long Learning: Recognize the need for, and have the preparation and ability
to engage in independent and life-long learning in the broadest context of technological
change.
2
ANNA UNIVERSITY, CHENNAI
NON-AUTONOMOUS AFFILIATED COLLEGES
REGULATIONS 2021
CHOICE BASED CREDIT SYSTEM
B. E. CIVIL ENGINEERING
CURRICULUM FOR SEMESTERS I TO VIII AND SYLLABI FOR SEMESTERS III AND IV
SEMESTER I
PERIODS TOTAL
S. COURSE CATE-
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
1. IP3151 Induction Programme - - - - - 0
THEORY
2. HS3151 Professional English - I HSMC 3 0 0 3 3
3. MA3151 Matrices and Calculus BSC 3 1 0 4 4
4. PH3151 Engineering Physics BSC 3 0 0 3 3
5. CY3151 Engineering Chemistry BSC 3 0 0 3 3
6. GE3151 Problem Solving and
ESC 3 0 0 3 3
Python Programming
7. GE3152 அ யல் த ழ் /Scientific
HSMC 1 0 0 1 1
Thoughts in Tamil
PRACTICALS
8. GE3171 Problem Solving and Python
ESC 0 0 4 4 2
Programming Laboratory
9. BS3171 Physics and Chemistry
BSC 0 0 4 4 2
Laboratory
10. GE3172 English Laboratory$ EEC 0 0 2 2 1
TOTAL 16 1 10 27 22
$
Skill Based Course
SEMESTER II
PERIODS TOTAL
S. COURSE CATE-
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. HS3251 Professional English - II HSMC 2 0 0 2 2
2. MA3251 Statistics and Numerical
BSC 3 1 0 4 4
Methods
3. PH3201 Physics for Civil Engineering BSC 3 0 0 3 3
4. BE3252 Basic Electrical, Electronics
and Instrumentation ESC 3 0 0 3 3
Engineering
5. GE3251 Engineering Graphics ESC 2 0 4 6 4
6. NCC Credit Course Level 1# - 2 0 0 2 2#
7. GE3252 த ழர் மர /Heritage of HSMC 1 0 0 1 1
Tamils
PRACTICALS
8. GE3271 Engineering Practices
ESC 0 0 4 4 2
Laboratory
9. BE3272 Basic Electrical, Electronics
and Instrumentation ESC 0 0 4 4 2
Engineering Laboratory
10. GE3272 Communication Laboratory /
EEC 0 0 4 4 2
Foreign Language $
TOTAL 14 1 16 31 23
#
NCC Credit Course level 1 is offered for NCC students only. The grades earned by the students will be recorded
in the Mark Sheet, however the same shall not be considered for the computation of CGPA
$
Skill Based Course
3
SEMESTER III
PERIODS TOTAL
S. COURSE CATE PER WEEK
COURSE TITLE CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. MA3351 Transforms and Partial
BSC 3 1 0 4 4
Differential Equations
2. ME3351 Engineering Mechanics ESC 3 0 0 3 3
3. CE3301 Fluid Mechanics PCC 3 0 0 3 3
4. CE3302 Construction Materials and PCC 3 0 0 3 3
Technology
5. CE3303 Water Supply and Wastewater PCC 4 0 0 4 4
Engineering
6. CE3351 Surveying and Levelling PCC 3 0 0 3 3
PRACTICALS
7. CE3361 Surveying and Levelling PCC 0 0 3 3 1.5
Laboratory
8. CE3311 Water and Wastewater PCC 0 0 3 3 1.5
Analysis Laboratory
9. GE3361 Professional Development $ EEC 0 0 2 2 1
TOTAL 19 1 8 28 24
$
Skill Based Course
SEMESTER IV
PERIODS TOTAL
S. COURSE CATE
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. CE3401 Applied Hydraulics PCC 3 1 0 4 4
Engineering
2. CE3402 Strength of Materials PCC 3 0 0 3 3
3. CE3403 Concrete Technology PCC 3 0 0 3 3
4. CE3404 Soil Mechanics PCC 3 0 0 3 3
5. CE3405 Highway and Railway PCC 3
3 0 0 3
Engineering
6. GE3451 Environmental Sciences and
BSC 2 0 0 2 2
Sustainability
7. NCC Credit Course Level 2# 3 0 0 3 3#
PRACTICALS
8. CE3411 Hydraulic Engineering PCC 0 0 3 3 1.5
Laboratory
9. CE3412 Materials Testing Laboratory PCC 0 0 4 4 2
10. CE3413 Soil Mechanics Laboratory PCC 0 0 3 3 1.5
TOTAL 17 1 10 28 23
#
NCC Credit Course level 2 is offered for NCC students only. The grades earned by the students will be
recorded in the Mark Sheet, however the same shall not be considered for the computation of CGPA
4
SEMESTER V
PERIODS TOTAL
S. COURSE CATE
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. CE3501 Design of Reinforced
Concrete Structural PCC 3 0 0 3 3
Elements
2. CE3502 Structural Analysis I PCC 3 0 0 3 3
3. CE3503 Foundation Engineering PCC 3 0 0 3 3
4. Professional Elective I PEC 3 0 0 3 3
5. Professional Elective II PEC 3 0 0 3 3
6. Professional Elective III PEC 3 0 0 3 3
7. Mandatory Course-I& MC 3 0 0 3 0
PRACTICALS
8. CE3511 Highway Engineering PCC 0 0 4 4 2
Laboratory
9. CE3512 Survey Camp (2 weeks) EEC 0 0 0 0 1
TOTAL 21 0 4 25 21
&
Mandatory Course-I is a Non-credit Course (Student shall select one course from the list given under MC-I)
SEMESTER VI
PERIODS TOTAL
S. COURSE CATE PER WEEK
COURSE TITLE CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. CE3601 Design of Steel Structural
PCC 3 0 0 3 3
Elements
2. CE3602 Structural Analysis II PCC 3 0 0 3 3
3. CE3691 Hydrology and Water
PCC 3 0 0 3 3
Resources Engineering
4. Professional Elective IV PEC 3 0 0 3 3
5. Professional Elective V PEC 3 0 0 3 3
6. Professional Elective VI PEC 3 0 0 3 3
7. Open Elective – I* OEC 3 0 0 3 3
8. Mandatory Course-II& MC 3 0 0 3 0
9. NCC Credit Course Level
3 0 0 3 3#
3#
PRACTICALS
10. CE3611 Building Drawing and 0 0 4 4
PCC 2
Detailing Laboratory
TOTAL 24 0 4 28 23
*Open Elective – I shall be chosen from the emerging technologies
&
Mandatory Course-II is a Non-credit Course (Student shall select one course from the list given under MC-II)
#
NCC Credit Course level 3 is offered for NCC students only. The grades earned by the students will be recorded
in the Mark Sheet, however the same shall not be considered for the computation of CGPA
5
SEMESTER VII/VIII*
PERIODS TOTAL
S. COURSE CATE
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
THEORY
1. CE3701 Estimation, Costing and
PCC 3 0 0 3 3
Valuation Engineering
2. CE3702 Irrigation Engineering
PCC 2 0 2 4 3
and Drawing
3. GE3791 Human Values and
HSMC 2 0 0 2 2
Ethics
4. GE3752 Total Quality
HSMC 3 0 0 3 3
Management
5. Open Elective – II** OEC 3 0 0 3 3
6. Open Elective – III*** OEC 3 0 0 3 3
7. Open Elective – IV*** OEC 3 0 0 3 3
TOTAL 19 0 2 21 20
*If students undergo internship in Semester VII, then the courses offered during semester VII will be offered
during semester VIII
**Open Elective – II shall be chosen from the emerging technologies
***Open Elective III and IV (Shall be chosen from the list of open electives offered by other Programmes
SEMESTER VIII/VII*
PERIODS TOTAL
S. COURSE CATE
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
PRACTICALS
1. CE3811 Project Work/Internship EEC 0 0 20 20 10
TOTAL 0 0 20 20 10
*If students undergo internship in Semester VII, then the courses offered during semester VII will be offered
during semester VIII
TOTAL CREDITS: 166
MANDATORY COURSES I
PERIODS TOTAL
S. CATE
COURSE COURSE TITLE PER WEEK CONTACT CREDITS
NO. GORY
CODE L T P PERIODS
1. MX3081 Introduction to Women MC 3 0 0 3 0
and Gender Studies
2. MX3082 Elements of Literature MC 3 0 0 3 0
3. MX3083 Film Appreciation MC 3 0 0 3 0
4. MX3084 Disaster Management MC 3 0 0 3 0
6
MANDATORY COURSES II
PERIODS TOTAL
S. COURSE CATE
COURSE TITLE PER WEEK CONTACT CREDITS
NO. CODE GORY
L T P PERIODS
1. MX3085 Well Being with MC 3 0 0 3 0
Traditional Practices
(Yoga, Ayurveda and
Siddha)
2. MX3086 History of Science and MC 3 0 0 3 0
Technology in India
3. MX3087 Political and Economic MC 3 0 0 3 0
Thought for a Humane
Society
4. MX3088 State, Nation Building MC 3 0 0 3 0
and Politics in India
5. MX3089 Industrial Safety MC 3 0 0 3 0
7
PROFESSIONAL ELECTIVE COURSES : VERTICALS
VERTICAL I VERTICAL II VERTICAL III VERTICAL IV VERTICAL V VERTICAL VI VERTICAL VII VERTICAL VIII VERTICAL IX
(Structures) (Construction (Geotechnical) (Geo- (Transportation (Environment) (Water Resources) (Ocean (Diversified
techniques and Informatics) infrastructure) Engineering) Course)
Practices)
Concrete Formwork Geo- Total Station and Airports and Climate Change Participatory Water Ocean Wave Steel
Structures Engineering Environmental GPS Surveying Harbours Adaptation and Resources Dynamics Concrete
Engineering Mitigation Management Composite
Structures
Steel Construction Ground Remote Sensing Traffic Air and Noise Groundwater Marine Finance For
Structures Equipment and Improvement Concepts Engineering and Pollution Control Engineering Geotechnical Engineers
Machinery Techniques Management Engineering Engineering
Prefabricated Sustainable Soil Dynamics Satellite Image Urban Planning Environmental Water Resources Coastal Earth and
Structures Construction and Machine Processing and Impact Systems Engineering Rockfill Dams
and Lean Foundations Development Assessment Engineering
Construction
Prestressed Digitalized Rock Mechanics Cartography and Smart cities Industrial Watershed Off shore Computational
Concrete Construction GIS Wastewater Conservation and Structures Fluid
Structures Lab Management Management Dynamics
Rehabilitation/ Construction Earth and Earth Photogrammetry Intelligent Solid and Integrated Water Port and Rainwater
Heritage Management Retaining Transport Hazardous Resources Harbour Harvesting
Restoration and Safety Structures Systems Waste Management Engineering
Management
Dynamics and Advanced Pile Foundation Airborne and Pavement Environmental Urban Water Coastal Hazards Transport and
Earthquake Construction Terrestrial laser Engineering Policy and Infrastructure and Mitigation Environment
Resistant Techniques mapping Legislations
Structures
Introduction to Energy Efficient Tunneling Hydrographic Transportation Environment, Water Quality and Coastal Zone Environmental
Finite Element Buildings Engineering Surveying planning Health and Management Management quality
Method Process Safety and Remote Monitoring
Sensing
Professional Elective Courses will be registered in Semesters V and VI. These courses are listed in groups called verticals that represent a particular area of specialisation / diversified
group. Students are permitted to choose all the Professional Electives from a particular vertical or from different verticals. Further, only one Professional Elective course shall be chosen
in a semester horizontally (row-wise). However, two courses are permitted from the same row, provided one course is enrolled in Semester V and another in semester VI.
The registration of courses for B.E./B.Tech (Honours) or Minor degree shall be done from Semester V to VIII. The procedure for registration of courses explained above shall be
followed for the courses of B.E/B.Tech (Honours) or Minor degree also. For more details on B.E./B.Tech (Honours) or Minor degree refer to the Regulations 2021, Clause 4.10.
8
PROFESSIONAL ELECTIVE COURSES : VERTICALS
VERTICAL I: STRUCTURES
9
VERTICAL III: GEOTECHNICAL
10
VERTICAL VI: ENVIRONMENT
COURSE PERIODS TOTAL
S. CATE PER WEEK
CODE COURSE TITLE CONTACT CREDITS
NO. GORY
L T P PERIODS
1. CE3032 Climate Change PEC 3 0 0 3 3
Adaptation and Mitigation
2. CCE331 Air and Noise Pollution PEC 3 0 0 3 3
Control Engineering
3. CCE333 Environmental Impact PEC 3 0 0 3 3
Assessment
4. CCE334 Industrial Wastewater PEC 3 0 0 3 3
Management
5. CE3033 Solid and Hazardous PEC 3 0 0 3 3
Waste Management
6. CE3034 Environmental Policy and PEC 3 0 0 3 3
Legislations
7. CCE332 Environment, Health and PEC 3 0 0 3 3
Safety
VERTICAL VII: WATER RESOURCES
COURSE PERIODS TOTAL
S. CATE PER WEEK
CODE COURSE TITLE CONTACT CREDITS
NO. GORY
L T P PERIODS
1. CE3035 Participatory Water PEC 3 0 0 3 3
Resources Management
2. CE3036 Ground Water Engineering PEC 3 0 0 3 3
3. CE3037 Water Resources Systems PEC 3 0 0 3 3
Engineering
4. CE3038 Watershed Conservation PEC 3 0 0 3 3
and Management
5. CE3039 Integrated Water PEC 3 0 0 3 3
Resources Management
6. CE3040 Urban Water Infrastructure PEC 3 0 0 3 3
7. CE3041 Water Quality and PEC 3 0 0 3 3
Management
OPEN ELECTIVES
(Students shall choose the open elective courses, such that the course contents are not
similar to any other course contents/title under other course categories)
12
7. OMF353 Sustainable Manufacturing OEC 3 0 0 3 3
8. OAU351 Electric and Hybrid Vehicle OEC 3 0 0 3 3
9. OAS352 Space Engineering OEC 3 0 0 3 3
10. OIM351 Industrial Management OEC 3 0 0 3 3
11. OIE354 Quality Engineering OEC 3 0 0 3 3
12. OSF351 Fire Safety Engineering OEC 3 0 0 3 3
13. OML351 Introduction to non- OEC 3 0 0 3 3
destructive testing
14. OMR351 Mechatronics OEC 3 0 0 3 3
15. ORA351 Foundation of Robotics OEC 3 0 0 3 3
16. OAE352 Fundamentals of OEC 3 0 0 3 3
Aeronautical engineering
17. OGI351 Remote Sensing Concepts OEC 3 0 0 3 3
18. OAI351 Urban Agriculture OEC 3 0 0 3 3
19. OEN351 Drinking Water Supply and OEC 3 0 0 3 3
Treatment
20. OEE352 Electric Vehicle technology OEC 3 0 0 3 3
21. OEI353 Introduction to PLC OEC 3 0 0 3 3
Programming
22. OCH351 Nano Technology OEC 3 0 0 3 3
23. OCH352 Functional Materials OEC 3 0 0 3 3
24. OBT352 Biomedical Instrumentation OEC 3 0 0 3 3
25. OFD352 Traditional Indian Foods OEC 3 0 0 3 3
26. OFD353 Introduction to food OEC 3 0 0 3 3
processing
27. OPY352 IPR for Pharma Industry OEC 3 0 0 3 3
28. OTT351 Basics of Textile Finishing OEC 3 0 0 3 3
29. OTT352 Industrial Engineering for OEC 3 0 0 3 3
Garment Industry
30. OTT353 Basics of Textile OEC 3 0 0 3 3
Manufacture
31. OPE351 Introduction to Petroleum OEC 3 0 0 3 3
Refining and Petrochemicals
32. OPE352 Energy Conservation and OEC 3 0 0 3 3
Management
33. OPT351 Basics of Plastics OEC 3 0 0 3 3
Processing
34. OEC351 Signals and Systems OEC 3 0 0 3 3
35. OEC352 Fundamentals of Electronic OEC 3 0 0 3 3
Devices and Circuits
36. OBM351 Foundation Skills in OEC 3 0 0 3 3
integrated product
Development
37. OBM352 Assistive Technology OEC 3 0 0 3 3
38. OMA352 Operations Research OEC 3 0 0 3 3
39. OMA353 Algebra and Number Theory OEC 3 0 0 3 3
40. OMA354 Linear Algebra OEC 3 0 0 3 3
13
OPEN ELECTIVES – IV
COURSE PERIODS TOTAL
SL. CATE PER WEEK
CODE COURSE TITLE CONTACT CREDITS
NO. GORY
L T P PERIODS
1. OHS352 Project Report Writing OEC 3 0 0 3 3
2. OMA355 Advanced Numerical OEC 3 0 0 3 3
Methods
3. OMA356 Random Processes OEC 3 0 0 3 3
4. OMA357 Queuing and Reliability OEC 3 0 0 3 3
Modelling
5. OMG354 Production and OEC 3 0 0 3 3
Operations Management
for Entrepreneurs
6. OMG355 Multivariate Data OEC 3 0 0 3 3
Analysis
7. OME352 Additive Manufacturing OEC 3 0 0 3 3
8. OME353 New Product OEC 3 0 0 3 3
Development
9. OME355 Industrial Design & Rapid OEC 2 0 2 4 3
Prototyping Techniques
10. OMF352 Micro and Precision OEC 3 0 0 3 3
Engineering
11. OMF354 Cost Management of OEC 3 0 0 3 3
Engineering Projects
12. OAU352 Batteries and OEC 3 0 0 3 3
Management system
13. OAU353 Sensors and Actuators OEC 3 0 0 3 3
14. OAS353 Space Vehicles OEC 3 0 0 3 3
15. OIM352 Management Science OEC 3 0 0 3 3
16. OIM353 Production Planning and OEC 3 0 0 3 3
Control
17. OIE353 Operations Management OEC 3 0 0 3 3
18. OSF352 Industrial Hygiene OEC 3 0 0 3 3
19. OSF353 Chemical Process Safety OEC 3 0 0 3 3
20. OML352 Electrical, Electronic and OEC 3 0 0 3 3
Magnetic materials
21. OML353 Nanomaterials and OEC 3 0 0 3 3
applications
22. OMR352 Hydraulics and OEC 3 0 0 3 3
Pneumatics
23. OMR353 Sensors OEC 3 0 0 3 3
24. ORA352 Foundation of OEC 3 0 0 3 3
Automation
25. ORA353 Concepts in Mobile OEC 3 0 0 3 3
Robotics
26. OMV351 Marine Propulsion OEC 3 0 0 3 3
27. OMV352 Marine Merchant OEC 3 0 0 3 3
Vehicles
28. OMV353 Elements of Marine OEC 3 0 0 3 3
Engineering
29. OAE353 Drone Technologies OEC 3 0 0 3 3
14
30. OGI352 Geographical Information OEC 3 0 0 3 3
System
31. OAI352 Agriculture OEC 3 0 0 3 3
Entrepreneurship
Development
32. OEN352 Biodiversity Conservation OEC 3 0 0 3 3
33. OEE353 Introduction to control OEC 3 0 0 3 3
systems
34. OEI354 Introduction to Industrial OEC 3 0 0 3 3
Automation Systems
35. OCH353 Energy Technology OEC 3 0 0 3 3
36. OCH354 Surface Science OEC 3 0 0 3 3
37. OBT353 Environment and OEC 3 0 0 3 3
Agriculture
38. OFD354 Fundamentals of Food OEC 3 0 0 3 3
Engineering
39. OFD355 Food safety and Quality OEC 3 0 0 3 3
Regulations
40. OPY353 Nutraceuticals OEC 3 0 0 3 3
41. OTT354 Basics of Dyeing and OEC 3 0 0 3 3
Printing
42. OTT355 Fibre Science OEC 3 0 0 3 3
43. OTT356 Garment Manufacturing OEC 3 0 0 3 3
Technology
44. OPE353 Industrial safety OEC 3 0 0 3 3
45. OPE354 Unit Operations in Petro OEC 3 0 0 3 3
Chemical Industries
46. OPT352 Plastic Materials for OEC 3 0 0 3 3
Engineers
47. OPT353 Properties and Testing of OEC 3 0 0 3 3
Plastics
48. OEC353 VLSI Design OEC 3 0 0 3 3
49. OEC354 Industrial IoT and OEC 2 0 2 4 3
Industry 4.0
50. OBM353 Wearable devices OEC 3 0 0 3 3
51. OBM354 Medical Informatics OEC 3 0 0 3 3
15
SUMMARY
CREDITS
CREDITS PER SEMESTER
Subject TOTAL
S.No.
Area
I II III IV V VI VII/VIII VIII/VII
1. HSMC 4 3 5 12
2. BSC 12 7 4 2 25
3. ESC 5 11 3 19
4. PCC 16 21 11 11 6 65
5. PEC 9 9 18
6. OEC 3 9 12
7. EEC 1 2 1 1 10 15
Total 22 23 24 23 21 23 20 10 166
8. Mandatory
Course
(Non credit)
16
ENROLLMENT FOR B.E. / B. TECH. (HONOURS) / MINOR DEGREE (OPTIONAL)
A student can also optionally register for additional courses (18 credits) and become eligible for the
award of B.E. / B. Tech. (Honours) or Minor degree.
For B.E. / B. Tech. (Honours), a student shall register for the additional courses (18 credits) from
semester V onwards. These courses shall be from the same vertical or a combination of different
verticals of the same programme of study only.
For minor degree, a student shall register for the additional courses (18 credits) from semester
V onwards. All these courses have to be in a particular vertical from any one of the other
programmes, Moreover, for minor degree the student can register for courses from any one of the
following verticals also.
VERTICALS FOR MINOR DEGREE (In addition to all the verticals of other programmes)
17
(Choice of courses for Minor degree is to be made from any one vertical of other
programmes or from anyone of the following verticals)
VERTICAL 2: ENTREPRENEURSHIP
COURSE PERIODS TOTAL
SL. CATE PER WEEK
CODE COURSE TITLE CONTACT CREDITS
NO. GORY
L T P PERIODS
1. CMG337 Foundations of
Entrepreneurship PEC 3 0 0 3 3
18
VERTICAL 3: PUBLIC ADMINISTRATION
COURSE PERIODS TOTAL
SL. CATE PER WEEK
CODE COURSE TITLE CONTACT CREDITS
NO. GORY
L T P PERIODS
1. CMG343 Principles of Public
PEC 3 0 0 3 3
Administration
2. CMG344 Constitution of India PEC 3 0 0 3 3
3. CMG345 Public Personnel
PEC 3 0 0 3 3
Administration
4. CMG346 Administrative Theories PEC 3 0 0 3 3
5. CMG347 Indian Administrative
PEC 3 0 0 3 3
System
6. CMG348 Public Policy
PEC 3 0 0 3 3
Administration
VERTICAL 4: BUSINESS DATA ANALYTICS
COURSE PERIODS TOTAL
SL. CATE
CODE COURSE TITLE PER WEEK CONTACT CREDITS
NO. GORY
L T P PERIODS
1. CMG349 Statistics for
PEC 3 0 0 3 3
Management
2. CMG350 Datamining for
PEC 3 0 0 3 3
Business Intelligence
3. CMG351 Human Resource
PEC 3 0 0 3 3
Analytics
4. CMG352 Marketing and Social
PEC 3 0 0 3 3
Media Web Analytics
5. CMG353 Operation and Supply
PEC 3 0 0 3 3
Chain Analytics
6. CMG354 Financial Analytics PEC 3 0 0 3 3
OBJECTIVES
To introduce the basic concepts of PDE for solving standard partial differential equations.
To introduce Fourier series analysis which is central to many applications in engineering apart
from its use in solving boundary value problems.
To acquaint the student with Fourier series techniques in solving heat flow problems used in
various situations.
To acquaint the student with Fourier transform techniques used in wide variety of situations.
To introduce the effective mathematical tools for the solutions of partial differential equations
that model several physical processes and to develop Z transform techniques for discrete time
systems.
20
TEXT BOOKS:
1. Grewal B.S.,“Higher Engineering Mathematics" 44thEdition, Khanna Publishers,New Delhi, 2018.
2. Kreyszig E, "Advanced Engineering Mathematics ", 10th Edition, John Wiley, New Delhi, India,
2016.
REFERENCES:
1. Andrews. L.C and Shivamoggi. B, "Integral Transforms for Engineers" SPIE Press, 1999.
2. Bali. N.P and Manish Goyal, "A Textbook of Engineering Mathematics", 10th Edition, Laxmi
Publications Pvt. Ltd, 2015.
3. James. G., "Advanced Modern Engineering Mathematics", 4thEdition, Pearson Education, New
Delhi, 2016.
4. Narayanan. S., Manicavachagom Pillay.T.K and Ramanaiah.G "Advanced Mathematics for
Engineering Students", Vol. II & III, S.Viswanathan Publishers Pvt. Ltd, Chennai, 1998.
5. Ramana. B.V., "Higher Engineering Mathematics", McGraw Hill Education Pvt. Ltd,
New Delhi, 2018.
6. Wylie. R.C. and Barrett . L.C., “Advanced Engineering Mathematics “Tata McGraw Hill Education
Pvt. Ltd, 6th Edition, New Delhi, 2012.
OUTCOMES:
On completion of the course, the student is expected to
CO1 Demonstrate the difference between solid and fluid, its properties and behaviour in static
conditions.
CO2 Apply the conservation laws applicable to fluids and its application through fluid kinematics
and dynamics.
CO3 Formulate the relationship among the parameters involved in the given fluid phenomenon
and to predict the performance of prototypes by model studies.
CO4 Estimate the losses in pipelines for both laminar and turbulent conditions and analysis of
pipes connected in series and parallel.
CO5 Explain the concept of boundary layer and its application to find the drag force excreted by
the fluid on the flat solid surface.
TEXTBOOKS:
1. Modi P.N and Seth Hydraulics and Fluid Mechanics including Hydraulic Machines Standard
Book House New Delhi. 2015.
2. Streeter, V.L. Wylie, E. B. and Bedford K.W, Fluid Mechanics. (9th Ed.) Tata McGraw Hill,
New Delhi, 1998.
REFERENCES:
1. S K Som; Gautam Biswas and S Chakraborty, Introduction to Fluid Mechanics and Fluid
Machines, Tata McGraw Hill Education Pvt. Ltd., 2012.
2. Pani B S, Fluid Mechanics: A Concise Introduction, Prentice Hall of India Private Ltd, 2016.
3. Jain A. K. Fluid Mechanics including Hydraulic Machines, Khanna Publishers, New Delhi,
2014.
4. Narayana Pillai N. Principles of Fluid Mechanics and Fluid Machines, (3rd Ed.) University
Press (India) Pvt. Ltd. 2009.
23
CE3302 CONSTRUCTION MATERIALS AND TECHNOLOGY LT P C
30 0 3
OBJECTIVES:
To introduce students to various construction materials and the techniques that are
commonly used in civil engineering construction.
UNIT I STONES - BRICKS - CONCRETE BLOCKS - LIME 9
Stone as building material – Criteria for selection – Tests on stones – Bricks – Classification –
Manufacturing of clay bricks – Tests on bricks – Compressive strength – Water Absorption –
Efflorescence – Lime – Preparation of lime mortar – Concrete hollow blocks – Lightweight concrete
blocks.
TEXTBOOKS
1. Varghese.P.C, Building Materials, Second Edition PHI Learning Ltd., 2015.
2. Arora S.P and Bindra S.P Building construction, Dhanpat Rai and sons,2013.
REFERENCES:
1. Varghese.P.C, Building Construction, Second Edition PHI Learning ltd., 2016.
2. Punmia ,B.C Building construction , Laxmi publication (p)ltd..,2008.
3. Peurifoy R.L., Schexnayder,C.J., Shapira A., Schmitt.R., Construction Planning Equipment
and Methods, Tata McGraw-hill, 2011.
4. Srinath L.S.,PERT and CPM -Principles and applications, Affliated East West Press 2001
24
CE3303 WATER SUPPLY AND WASTE WATER ENGINEERING LTPC
4 004
OBJECTIVES:
To introduce students to various components and design of water supply scheme, water
treatment methods, water storage distribution system, sewage treatment and disposal and
deign of intake structures and sewerage system.
25
TEXTBOOKS:
1. Garg, S.K. Environmental Engineering, Vol.I Khanna Publishers, New Delhi, 2010.
2. Modi, P.N., Water Supply Engineering, Vol.I Standard Book House, New Delhi, 2016.
3. Garg, S.K., Environmental Engineering Vol.II, Khanna Publishers, New Delhi, 2015.
4. Duggal K.N., “Elements of Environmental Engineering” S. Chand and Co. Ltd., New Delhi,
2014.
5. Punmia, B.C., Jain, A.K., and Jain.A.K.., Environmental Engineering, Vol.II, Laxmi
Publications, 2010.
REFERENCES:
1. Punmia B.C, Ashok Jain and Arun Jain, Water Supply Engineering, Laxmi Publications (P)
Ltd., New Delhi 2010.
2. Manual on Water Supply and Treatment, CPHEEO, Ministry of Urban Development,
Government of India, New Delhi, 1999.
3. Syed R. Qasimand Edward M. Motley Guang Zhu, Water Works Engineering Planning,
Design and Operation, Prentice Hall of India Learning Private Limited, New Delhi, 2009.
4. Of Urban Development, Government of India, New Delhi, 2013.
5. Metcalf and Eddy – Waste water Engineering – Treatment and Reuse, Tata Mc. Graw – Hill
Company, New Delhi, 2010.
6. Syed R.Qasim “Waste water Treatment Plants”, CRCPress,WashingtonD.C.,2010
7. Gray N.F, “Water Technology”, Elsevier India Pvt.Ltd. New Delhi, 2006.
26
UNIT V MODERN SURVEYING 9
Total Station: Digital Theodolite, EDM, Electronic field book – Advantages – Parts and accessories
– Working principle – Observables – Errors - COGO functions – Field procedure and
applications. GPS: Advantages – System components – Signal structure – Selective availability
and antispoofing receiver components and antenna – Planning and data acquisition – Data
processing – Errors inGPS – Field procedure and applications.
TOTAL 45 PERIODS
OUTCOMES:
On completion of the course, the student is expected to
CO1 Introduce the rudiments of various surveying and its principles.
CO2 Imparts knowledge in computation of levels of terrain and ground features
CO3 Imparts concepts of Theodolite Surveying for complex surveying operations
CO4 Understand the procedure for establishing horizontal and vertical control
CO5 Imparts the knowledge on modern surveying instruments
TEXTBOOKS:
1. Dr. B. C. Punmia, Ashok K. Jain and Arun K Jain, Surveying Vol. I & II, Lakshmi Publications
Pvt Ltd, New Delhi, Sixteenth Edition, 2016.
2. T. P. Kanetkarand S. V. Kulkarni, Surveying and Levelling, Parts 1 & 2, Pune Vidyarthi Griha
Prakashan, Pune, 2008.
REFERENCES:
1. R. Subramanian, Surveying and Levelling, Oxford University Press, Second Edition, 2012.
2. James M. Anderson and Edward M. Mikhail, Surveying, Theory and Practice, Seventh
Edition, Mc Graw Hill 2001.
3. Bannister and S. Raymond, Surveying, Seventh Edition, Longman 2004.
4. S. K. Roy, Fundamentals of Surveying, Second Edition, Prenticeˆ Hall of India2010.
5. K. R. Arora, Surveying Vol I & II, Standard Book house, Twelfth Edition 2013.
6. C. Venkatramaiah, Textbook of Surveying, Universities Press, Second Edition, 2011.
OBJECTIVES:
This subject includes the list of experiments to be conducted for characterization of
water and municipal sewage. At the end of the course, the student is expected to be
aware of the procedure for quantifying quality parameters for water and sewage.
27
12. Estimation of C.O.D.
13. Determination of TKN and Ammonia Nitrogen in wastewater
14. Determination of total and faecal coliform (Demonstration only)
TOTAL: 45 PERIODS
OUTCOMES:
On completion of the course, the student is expected to
CO1 Calibrate and standardize the equipment
CO2 Collect proper sample for analysis
CO3 To know the sample preservation methods
CO4 To perform field oriented testing of water, wastewater
CO5 To perform coliform analysis
REFERENCES:
1. APHA, "Standard Methods for the Examination of Water and Waste water", 22 nd Ed.
Washington, 2012.
2. "Laboratory Manual for the Examination of water, wastewater soil Rump", H.H. and
Krist,H. – Second Edition, VCH, Germany, 3rd Edition, 1999.
3. "Methods of air sampling & analysis",James P.Lodge Jr(Editor) 3rd Edition, Lewis
publishers,Inc,USA,1989.
LIST OF EXPERIMENTS:
Chain Survey
1. Study of chains and its accessories, Aligning, Ranging, Chaining and Marking Perpendicular
offset
2. Setting out works – Foundation marking using tapes single Room and Double Room
Compass Survey
3. Compass Traversing – Measuring Bearings & arriving included angles
Levelling - Study of levels and levelling staff
4. Fly levelling using Dumpy level &Tilting level
5. Check levelling
Theodolite - Study of Theodolite
6. Measurements of horizontal angles by reiteration and repetition and vertical angles
7. Determination of elevation of an object using single plane method when base is
Accessible/inaccessible.
28
COURSE OUTCOMES
On completion of the course, the student is expected to
CO1 Impart knowledge on the usage of basic surveying instruments like chain/tape, compass
and levelling instruments
CO2 Able to use levelling instrument for surveying operations
CO3 Able to use theodolite for various surveying operations
CO4 Able to carry out necessary surveys for social infrastructures
CO5 Able to prepare planimetric maps
REFERENCES:
1. T. P. Kanetkarand S. V. Kulkarni, Surveying and Levelling, Parts 1 & 2, Pune Vidyarthi Griha
Prakashan, Pune, 24th Reprint, 2015.
2. Dr. B. C. Punmia, Ashok K. Jainand Arun K Jain, Surveying Vol. I & II, Lakshmi Publications
Pvt Ltd, New Delhi, 17th Edition, 2016.
3. James M. Anderson and Edward M. Mikhail, Surveying, Theory and Practice, Seventh
Edition, McGraw Hill 2001
4. Bannisterand S. Raymond, Surveying, Seventh Edition, Longman 2004 a. David Clark,
Plane and Geodetic Surveying for Engineers, Volume I, Constable and Company Ltd,
London, CBS, 6th Edition, 2004.
5. David Clark and James Clendinning, Plane and Geodetic Surveying for Engineers, VolumeII,
Constable and Company Ltd, London, CBS, 6th Edition, 2004.
6. S. K. Roy, Fundamentals of Surveying, Second Edition, Prentice ‘Hall of India 2004
7. K. R. Arora, Surveying Vol. I & II, Standard Book house, Eleventh Edition, 2013.
OBJECTIVES:
To impart basic knowledge to the students about the open channel flows with analysis of
uniform flow, gradually varied flow and rapidly varied flow and to expose them to basic
principles of working of hydraulic machineries and to design Pelton wheel, Francis and
Kaplan turbine, Centrifugal and Reciprocating pumps.
TEXT BOOKS:
1. Jain. A.K., Fluid Mechanics, Khanna Publishers, Delhi, 2010.
2. Chandramouli P N, Applied Hydraulic Engineering, Yes Dee Publisher, 2017
REFERENCES:
1. Ven Te Chow, Open Channel Hydraulics, McGraw Hill, New York, 2009.
2. Modi P.N. and Seth S.M., Hydraulics and Fluid Mechanics, Standard Book House, New
Delhi, 19th edition, 2013.
3. Mays L. W., Water Resources Engineering, John Wiley and Sons (WSE), New York, 2019
4. Subramanya K., Flow in open channels, Tata McGraw Hill, New Delhi, 2019.
OBJECTIVES:
To learn the fundamental concepts of Stress in simple and complex states and to know the
mechanism of load transfer in beams and the induced stresses due to simple bending and
unsymmetrical bending and to determine the deformation in determinate beams and to know
the basic concepts of analysis of indeterminate beams.
31
CE3403 CONCRETE TECHNOLOGY L T P C
3 0 0 3
OBJECTIVES:
To study the properties of concrete making materials.
To have better knowledge about the chemical and mineral admixtures in concrete.
To familiarize with the IS method of mix design as per the latest code .
To understand the fresh and hardened properties of concrete. To know the importance
and applications of special concretes
REFERENCES:
1. Neville, A.M; "Properties of Concrete", Pitman Publishing Limited, London,1995
2. Gambhir.M.L.Concrete Technology,Fifth Edition, McGraw Hill Education,2017.
3. Job Thomas., Concrete Technology, Cencage learning India Private Ltd, New Delhi, 2015.
4. IS10262-2019 Recommended Guidelines for Concrete Mix Design, Bureau of Indian
Standards, New Delhii.
32
CE3404 SOIL MECHANICS LTPC
3003
OBJECTIVES
To impart knowledge to classify the soil based on index properties and to assess their
engineering properties based on the classification. To familiarize the students about the
fundamental concepts of compaction, flow through soil, stress transformation, stress
distribution, consolidation and shear strength of soils. To impart knowledge of design of both
finite and infinite slopes.
33
TEXTBOOKS:
1. Murthy, V.N.S., “Soil Mechanics and Foundation Engineering”, CBS Publishers Distribution
Ltd., New Delhi. 2015
2. Gopal Ranjan and Rao, A.S.R., “Basic and Applied Soil Mechanics”, New Age Ltd. International
Publisher New Delhi (India) 2006.
REFERENCES:
1. McCarthy, D.F., “Essentials of Soil Mechanics and Foundations”. Prentice-Hall, 2006.
2. Coduto, D.P., “Geotechnical Engineering – Principles and Practices”, Prentice Hall of India
Pvt.Ltd. New Delhi, 2010.
3. Das, B.M., “Principles of Geotechnical Engineering”. Brooks / Coles / Thompson Learning
Singapore, 8th Edition, 2013.
4. Punmia, B.C., “Soil Mechanics and Foundations”, Laxmi Publications Pvt. Ltd. New Delhi, 2005.
TEXTBOOKS:
1. Khanna.S. K., Justo.C.E.G and Veeraragavan A. "Highway Engineering", Nemchand
Publishers, 2014.
2. Subramanian K.P., "Highways, Railways, Airport and Harbour Engineering", Scitech
Publications (India), Chennai,2010
3. Kadiyali.L.R. "Principles and Practice of Highway Engineering", Khanna Technical
Publications, 6th edition Delhi,2015.
4. C.Venkatramaiah., Transportation Engineering-Vol.2 Railways, Airports, Docks and Harbours,
Bridges and Tunnels.,Universities Press (India) Private Limited, Hyderabad, 2015.
REFERENCES:
1. Indian Road Congress (IRC), Guidelines for the Design of Flexible Pavements, (Third Revision),
IRC:37-2012
2. Indian Road Congress (IRC), Guidelines for the Design of Plain Jointed Rigid Pavements for
Highways, ( Third Revision), IRC:58-2012
3. Yang H. Huang, "Pavement Analysis and Design", Pearson Education Inc, Nineth Impression,
South Asia,2012
4. Ian D. Walsh, "ICE manual of highway design and management", ICE Publishers, Ist Edition,
USA,2011
5. Fred L. Mannering, Scott S. Washburn and Walter P.Kilareski, "Principles of Highway
Engineering and Traffic Analysis", Wiley India Pvt. Ltd., New Delhi,2011
6. Garber and Hoel, "Principles of Traffic and Highway Engineering", CENGAGE Learning, New
Delhi,2010
7. O’Flaherty.C.A "Highways, Butterworth – Heinemann, Oxford,2006
8. IRC-37–2012,The Indian roads Congress, Guidelines for the Design of Flexible Pavements,
NewDelhi
9. IRC 58-2012. The Indian Road Congress, Guideline for the Design of RigidPavements for
Highways, NewDelhi
10. Saxena Subhash, C.and Satyapal Arora, A Course in Railway Engineering, Dhanapat Rai and
Sons, Delhi, 1998.
35
UNIT III RENEWABLE SOURCES OF ENERGY 6
Energy management and conservation, New Energy Sources: Need of new sources. Different types
new energy sources. Applications of- Hydrogen energy, Ocean energy resources, Tidal energy
conversion. Concept, origin and power plants of geothermal energy.
36
CE3411 HYDRAULIC ENGINEERING LABORATORY L T P C
0 0 3 1.5
OBJECTIVES:
To provide hands on experience in calibration of flow meters, performance characteristics of
pumps and turbines.
LIST OF EXPERIMENTS (Any 10 of the following)
A. FLOW MEASUREMENT
1. Calibration of Rotameter
2. Flow through Orifice meter/mouthpiece,Venturimeter and Notches
3. Bernoulli’s Experiment
B. LOSSES IN PIPES
4. Determination of friction factor in pipes.
5. Determination of minor losses
C. PUMPS
6. Characteristics of Centrifugal pumps
7. Characteristics of Gear pump
8. Characteristics of Submersible pump
9. Characteristics of Reciprocating pump
D. TURBINES
10. Characteristics of Pelton wheel turbine
11. Characteristics of Francis turbine
E. DETERMINATION OF METACENTRIC HEIGHT
12. Determination of metacentric height of floating bodies.
TOTAL: 45 PERIODS
OUTCOMES:
On completion of the course, the student is expected to
CO1 Apply Bernoulli equation for calibration of flow measuring devices.
CO2 Measure friction factor in pipes and compare with Moody diagram
CO3 Determine the performance characteristics of rotodynamic pumps.
CO4 Determine the performance characteristics of positive displacement pumps.
CO5 Determine the performance characteristics of turbines.
REFERENCES:
1. Hydraulic Laboratory Manual, Centre for Water Resources, Anna University, 2015.
2. Modi P.N. and Seth S.M., Hydraulics and Fluid Mechanics. Standard Book House. New Delhi,
2017.
3. Subramanya K, Fluid Mechanics and Hydraulic Machines, Tata McGraw Hill Edu. Pvt. Ltd.
2011
37
f. Hardness test on metals (Rockwell and Brinell Hardness Tests)
g. Compression test on helical spring
h. Deflection test on carriage spring
II. TESTS ON CEMENT
a. Determination of fineness of cement
b. Determination of consistency of cement
c. Determination of specific gravity of cement
d. Determination of initial and final setting time of cement
III. TESTS ON FINE AGGREGATE
a. Determination of specific gravity and water absorption of fine aggregate
b. Determination of grading of fine aggregate
c. Determination of water absorption for fine aggregate
IV. TESTS ON COARSE AGGREGATE
a. Determination of compacted and loose bulk density of coarse aggregate
b. Determination of impact value of coarse aggregate
c. Determination of elongation index of coarse aggregate
d. Determination of flakiness index of coarse aggregate
e. Determination of aggregate crushing value of coarse aggregate
f. Determination of specific gravity and water absorption of coarse aggregate
V. TESTS ON BRICKS
a. Determination of compressive strength of bricks
b. Determination of water absorption of bricks
c. Determination of efflorescence of bricks
VI. TESTS ON CONCRETE
a. Determination of slump of concrete
b. Determination of compressive strength of concrete
c. Determination of flowability of self-compacting concrete (Demo only)
VII. TEST ON WOOD
a. Determination of Compression test on wood
TOTAL: 60 PERIODS
OUTCOMES:
On completion of the course, the student is expected to
CO1 Determine the mechanical properties of steel.
CO2 Determine the physical properties of cement
CO3 Determine the physical properties of fine and coarse aggregate.
CO4 Determine the workability and compressive strength of concrete.
CO5 Determine the strength of brick and wood.
OBJECTIVES:
To develop skills to test the soils for their index and engineering properties and to
characterize the soil based on their properties.
EXERCISES:
1. DETERMINATION OF INDEX PROPERTIES
Specific gravity of soil solids
a. Grain size distribution – Sieve analysis
38
b. Grain size distribution - Hydrometer analysis
c. Liquid limit and Plastic limit tests
d. Shrinkage limit and Differential free swell tests
2. DETERMINATION OF INSITU DENSITY AND COMPACTION CHARACTERISTICS
a. Field density Test ( Sand replacement method)
b. Determination of moisture – density relationship using standard proctor compaction test.
3. DETERMINATION OF ENGINEERING PROPERTIES
a. Permeability determination (constant head and falling head methods)
b. One dimensional consolidation test (Determination of co-efficient of consolidation only)
c. Direct shear test in cohesion less soil
d. Unconfined compression test in cohesive soil
e. Laboratory vane shear test in cohesive soil
f. Tri-axial compression test in cohesion less soil (Demonstration only)
g. California Bearing Ratio Test
4. TEST ON GEOSYNTHETICS (Demonstration only)
Determination of tensile strength and interfacial friction angle.
a. Determination of apparent opening sizes and permeability.
TOTAL: 45 PERIODS
OUTCOME:
On completion of the course, the student is expected to
CO1 Conduct tests to determine the index properties of soils
CO2 Determine the insitu density and compaction characteristics.
CO3 Conduct tests to determine the compressibility, permeability and shear strength of soils.
CO4 Understand the various tests on Geosynthetics.
REFERENCES:
1. Soil Engineering Laboratory Instruction Manual” published by Engineering College Co-
operative Society, Anna University, Chennai, 2010.
2. “Saibaba Reddy, E. Ramasastri, K. “Measurement of Engineering Properties of Soils”, New
age International (P) limited publishers, New Delhi, 2008.
3. Lambe T.W., “Soil Testing for Engineers”, John Wiley and Sons, New York, 1951. Digitized
2008.
4. IS Code of Practice (2720) Relevant Parts, as amended from time to time, Bureau of Indian
Standards, New Delhi.
5. G.Venkatappa Rao and Goutham .K. Potable, “Geosynthetics Testing – A laboratory
Manual”, Sai Master Geoenvironmental Services Pvt. Ltd., 1st Edition 2008.
6. Braja M.Das., “Soil Mechanics: Laboratory Manual”, Oxford University Press, eighth edition,
2012.
39