Wimpey Laboratories DUBAI Accreditation

This is to attest that
WIMPEY LABORATORIES - LLC

WAREHOUSE NO. 1 & 2, WIMPEY BUILDING, PLOT NO. 364-873, AL QUOZ INDUSTRIAL AREA 1
DUBAI, PB 123279, UNITED ARAB EMIRATES
Testing Laboratory TL-564
has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance
with ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This
organization is accredited to provide the services specified in the scope of accreditation.
Effective Date May 20, 2021
President
WIMPEY LABORATORIES - LLC
www.wimpeylab.com
Contact Name Dr. V.B. Mohan Kumar Contact Phone +971 432 04717
Accredited to ISO/IEC 17025:2017 Effective Date May 20, 2021
Thermoplastics and Sealants
AASHTO M 249-11 Standard specification for white and yellow reflective thermoplastic striping
material (solid form) – Clause 4.3.5 crack resistance, Clause 4.3.2 drying time,
Clause 4.3.5 softening point, Clause 4.3.6 flowability and extended heating and
Clause 4.1 specific gravity
ASTM C510 Standard Test Method for Staining and Color Change of Single- or
Multicomponent Joint Sealants
ASTM C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C794 Standard test method for adhesion-in-peel of elastomeric joint sealants
ASTM C920-14a Standard specification for elastomeric joint sealants section 9
ASTM C1246 Standard test method for effects of heat aging on weight loss, cracking, and
chalking of elastomeric sealants after cure
ASTM D523-14 Standard Test Method for Specular Gloss
Fiber Optic Cable
IEC 60794-1-21 Tensile Performance Test
IEC 60794-1-21 Crush Test (Compression)
IEC 60794-1-21 Impact Resistance Test
IEC 60794-1-21 Torsion Test, Bend Test
IEC 60794-1-21 Bending Under Tension
IEC 60794-1-21 Temperature Cycling Test
IEC 60794-1-21 Water Penetration Test
ISO 13385-1 Outer Cable Dimension
Pigtail & Patch Cord
IEC 61300-2-2 Mating Durability
IEC 61300-2-22 Change of Temperature
TL-564
WIMPEY LABORATORIES - LLC Page 2 of 49
IEC 61300-2-4 Fiber/Cable Retention
IEC 61300-2-6 Tensile Strength of coupling Mechanism Pulling Force Straight
IEC 61300-3-4 Attenuation
IEC 61300-3-6 Return Loss
Adaptor & Connectors
IEC 61300-2-2 Mating Durability
IEC 61300-2-22 Change of Temperature
IEC 61300-2-4 Fiber/Cable Retention
IEC 61300-2-6 Tensile Strength of coupling Mechanism Pulling Force Straight
IEC 61300-3-4 Attenuation
IEC 61300-3-6 Return Loss
Sanitary Wares
BS EN 198 Clause 5 Sanitary appliances. Baths made from crosslinked cast acrylic sheets:
Determination of marking
BS EN 198 Annex A2 Sanitary appliances. Baths made from crosslinked cast acrylic sheets:
Geometric Deviations
Resistance to Impact
Determination of rigidity
BS EN 198 Annex A6 Sanitary appliances. Baths made from crosslinked cast acrylic sheets: Hand
Grip tests
BS EN 232 Baths: Determination of Connecting dimensions
BS EN 249 Clause 5 Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets:
Determination of Marking
BS EN 249 Annex A2 Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets:
Geometric Deviations
Resistance to Impact
Determination of Deflections
EN 251 Shower trays: determination of connecting dimensions
TL-564
BS EN 13407 Clause Wall-hung urinals. Functional requirements and test methods. Class 1 products:
6.6.1.2 Testing of depth of water seal
6.6.1.3.1 Sawdust test
6.6.1.3.2 Flushing of three plastics balls test
6.6.1.3.3 Over splashing test
6.6.1.3.4 Discharge test
BS EN 13407 Clause 6.6.2 Wall-hung urinals. Functional requirements and test methods. Class 1 products:
Determination of Water absorption
Static load test
BS EN 13407 Clause 7.3 Wall-hung urinals. Functional requirements and test methods. Class 2 products:
Load resistance Test
Durability Test
Testing of depth of water seal
Cleanability Test
BS EN 13407 Clause 8 Wall-hung urinals. Functional requirements and test methods: Marking
BS EN 14516 Clause 5.2.1 Baths for domestic purposes. Requirements for class 1 & 2 products:
& 6.2.1 Cleanability - Test for appearance of surface.
BS EN 14516 Clause 5.2.2 Baths for domestic purposes. Requirements for class 1 & 2 products.
& 6.2.2 Cleanability-Test for drainage of water
BS EN 14516 Clause 8.1 Baths for domestic purposes. Test for stability of bottom of bath
BS EN 14516 Clause 8.2 Baths for domestic purposes. Test for resistance to chemicals and staining
agents
BS EN 14516 Clause 9 Baths for domestic purposes. Marking
BS EN 14527 Clause 5.2.1 Shower trays for domestic purposes. Requirements for class 1 & 2 products:
& Clause 6.2.1 Cleanability- Test for appearance of surface
BS EN 14527 Clause 5.2.2 Shower trays for domestic purposes. Requirements for class 1 & 2 products.
& Clause 6.2.2 Cleanability-Test for drainage of water
TL-564
BS EN 14527 Clause 8.1 Shower trays for domestic purposes: Test for stability of bottom of the shower
tray
BS EN 14527 Clause 8.2 Shower trays for domestic purposes: Test for Chemical Resistance
EN 14688 Clause 5.2 Sanitary appliances. Wash basins: Test for load resistance
EN 14688 Clause 5.3 Sanitary appliances. Wash basins: Test for draining of water
EN 14688 Clause 5.5 Sanitary appliances. Wash basins: Resistance to Chemical and staining Agents
EN 14688 Clause 5.6 Sanitary appliances. Wash basins: Resistance to scratching
EN 14688 Clause 5.7 Sanitary appliances. Wash basins. Functional requirements and test methods:
Resistance to Abrasion
EN 14688 Clause 5.8 Sanitary appliances. Wash basins: Test for Cleanability
EN 14688 Clause 5.9 Sanitary appliances. Wash basins: Determination of flow rate of overflow
EN 14688 Clause 6 Sanitary appliances. Wash basins: Marking and product designation
IQS 1612 Sanitary Appliances – Wash Basins
IQS 1911 Sanitary Appliances – Bidet and Closets
SASO 1024 Clause 2 Ceramic Sanitary appliances: Test method for visual examination for
appearance
SASO 1024 Clause 3 Ceramic Sanitary appliances: Water absorption
SASO 1024 Clause 4 Ceramic Sanitary appliances: Crazing chemical resistance
SASO 1024 Clause 5 Ceramic Sanitary appliances: Chemical resistance test
SASO 1024 Clause 6 Ceramic Sanitary appliances: Resistance to staining and burning
SASO 1024 Clause 7 Ceramic Sanitary appliances: Abrasion resistance
SASO 1024 Clause 8 Ceramic Sanitary appliances: Warpage test
SASO 1024 Clause 9 Ceramic Sanitary appliances: Test for thickness & dimension
SASO 1257 Sanitary appliances - flushing water tanks
SASO 1376 Methods of testing paper towels and toilet paper
SASO 1474 Ceramic sanitary appliances - methods of test for western water closets
SASO 1476 Ceramic sanitary appliances - wash basins
SASO 1481 Clause-5 Sanitary appliances. Flushing apparatus: Evaluation of backflow prevention
SASO 1913- Clause 6 Sanitary appliances. Tapware: Determination of Marking
SASO 1914 Clause 3 Sanitary appliances. Tapware: Hydraulic characteristics test
TL-564
SASO 1914- Clause 4.1 Sanitary appliances Tapware: Mechanical leakage and tightness_ Tensile
Strength Test
SASO 1914- Clause 4.2 Sanitary appliances. Tapware: Mechanical leakage and tightness_ Pressure
Resistance Test at elevated temperature
SASO 1914- Clause 4.3 Sanitary appliances. Tapware: Mechanical leakage and tightness_ Flexing
Durability Test
SASO 1914- Clause 4.4 Sanitary appliances. Tapware: Mechanical leakage and tightness_ Thermal
shock resistance test
SASO 2655 Sanitary Appliances: General Requirements for plumbing fixture fittings
SASO 2656 Sanitary Appliances: Methods of test for plumbing fixture fittings
SASO 2896 Clause 9 Floor and Trench Drains: Determination of Top dimensions – grate free area
SASO 2896 Clause 10 Floor and Trench Drains: Loading test
SASO 2896 Clause 11 Floor and Trench Drains: Weathering test
SASO 2896 Clause 12 Floor and Trench Drains: Determination of Markings
UAE.S GSO 143 Methods of testing facial tissue-paper
Cosmetics
ASTM D36 Determination of softening point of Bituminous Sheet Material
ASTM D5147 section 6 Determination of Thickness of Bituminous Sheet Material
ASTM D5147 section 12 Determination of Low Temperature of flexibility of Bituminous Sheet Material
ASTM D5147 section 13 Determination of heat conditioning of Bituminous Sheet Material
GSO 1943/GSO 1153 Determination of pH in cosmetics
GSO 1943/GSO 2019 Determination of Peroxide value in cosmetics
GSO 1943/USFDA BAM Determination of Total Bacterial count in cosmetics

Chapter 23
GSO 1943/USFDA BAM Determination of Yeast & Mould in cosmetics

Chapter 23
GSO 1943/USFDA BAM Determination of Staphylococcus aureus in cosmetics

Chapter 23
GSO 1943/USFDA BAM Determination of Pseudomonas aeruginosa in cosmetics

Chapter 23
GSO 1943/USFDA BAM Determination of E.coli in cosmetics

Chapter 23
GSO 1943/WL-IP-201 Determination of crystalline silica in cosmetics
TL-564
GSO 1943/WL-IP-202 Determination of Mercaptoacetic Acid (Thioglycollic acid) in cosmetics
GSO 1943/WL-IP-203 Determination of ash content in cosmetics
GSO 1943/WL-IP-204 Determination of Heavy metals (Lead, Cadmium, Chromium, Arsenic) in

cosmetics
GSO 1943/WL-IP-205 Determination of Acid Value in cosmetics
GSO 1943/WM-IP-66 Qualitative determination of Lard & its derivatives in cosmetics
Water Proofing
ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C836/ASTM C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing
Membrane
ASTM C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied
Elastomeric Waterproofing Membranes
ASTM C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied
Elastomeric Waterproofing Membranes
ASTM D2240 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D5147 section 10 Determination of water absorption of Bituminous Sheet Material
ASTM D5147 section 11 Determination of dimensional stability of Bituminous Sheet Material
UEATC MOAT No. 27 General directive for the assessment of roof waterproofing systems (sections
4.2, 4.3, and 4.4)
Granite
ASTM C97 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension
Stone
ASTM C99 Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM C170 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C880 Standard Test Method for Flexural Strength of Dimension Stone
Steel
ASTM A370 Mechanical Testing of Steel Products

1) Tensile properties
2) Bend Test
3) Dimension
ASTM A480/ASTM A571 Determination of chemical composition of steel by XRF
Cement
TL-564
ASTM C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars
(Using 2-in. or [50-mm] Cube Specimens)
ASTM C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C185 Standard Test Method for Air Content of Hydraulic Cement Mortar
ASTM C187 Standard Test Method for Normal Consistency of Hydraulic Cement
ASTM C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat
Needle
ASTM C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability
Apparatus
ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep
Foundations
ASTM E303 Standard Test Method for Measuring Surface Frictional Properties Using the
British Pendulum Tester
BS 1881 part 207 Pull off test for concrete
BS 1881 part 207 Pull Out test for concrete
BS 6319-2 Testing of resin and polymer/cement compositions for use in construction-

method for measurement of compressive strength
BS 6319-7 Testing of resin and polymer/cement compositions for use in construction-

method for measurement of tensile strength
BS 7976-part 2 Determination of slip resistance using pendulum tester
BS EN 12504-2 Determination of rebound number in concrete structures
BS EN 12504-4 Determination of ultrasonic pulse velocity of concrete
Plastics
ASTM D638 Standard test method for tensile properties of plastics
ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D732 Standard Test Method for Shear Strength of Plastics by Punch Tool
ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced
Plastics and Electrical Insulating Materials
ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of
Plastics by Displacement
ASTM D882 Standard test method for tensile properties of thin plastic sheeting
ASTM D1004 Standard Test Method for Tear Resistance (Graves Tear) Of Plastic Film and
Sheeting
TL-564
ASTM F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D828 Standard Test Method for Tensile Properties of Paper and Paperboard Using
Constant-Rate-of-Elongation Apparatus
BS EN 1186-3 Determination of Overall Migration into aqueous food stimulants by total

immersion
BS EN 1186-9 Determination of Overall Migration into aqueous food stimulants by article filling
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Dimension
3.1
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Outer Appearance
3.2
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Flatness
3.3
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Resistance to static load
3.4.2
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Resistance to dynamic load
3.4.4
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Hinge and buffer performance
3.5
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Stability test
3.6
SASO-GSO-2444 Clause Test method for plastic toilet seat and cover - Resistance to hot water
3.7
Plastic Products
SASO ASTM D3826-98 Bags for packaging of bread, nuts, sweets and all bakery products. Standard
:2013 Practice for Determining the Degradation End Point in the Degradation of
Polyethylene and Polypropylene Using a Tensile Test
SASO ASTM D5208-14 Personal care products, made of plastics, such as gloves, shoe covers, and any
disposable personal care plastic products. Standard Practice for Fluorescent
Ultraviolet (UV) Exposure of Photodegradable Plastics: Fluorescent Ultraviolet
(UV) Exposure of Photodegradable Plastics
SASO ASTM D6988 Polyethylene sheets as table covers. Standard Guide for Determining the
Thickness of Test Specimens of Plastic Films: Determining the Thickness of
Test Specimens of Plastic Films
Radiation Contamination Testing
WL-IP-198 Determination of radiation contamination using TracercoT401
Chemistry - Liquid Cleaners
TL-564
SASO GSO 461/GSO 461 Determination of Total Active Ingredient Content in Liquid Carpet cleaner
SASO GSO 461/GSO 461 Determination of Alkalinity in Liquid Carpet cleaner
SASO GSO 461/GSO 461 Determination of Effect on Carpet backing in Liquid Carpet cleaner
SASO GSO 461/GSO 461 Determination of Oxidizing and Reducing Agents in Liquid Carpet cleaner
SASO GSO 461/GSO 461 Determination of Optical Brightening agent in Liquid Carpet cleaner
SASO GSO 802/ASTM D Determination of Specific gravity, 25 °C in Sodium Hypochlorite Solution for
891-05 Domestic uses
SASO GSO 802/GSO 152 Determination of Total Heavy metals as (lead) C in Sodium Hypochlorite
Solution for Domestic uses
SASO GSO 802/GSO 801 Determination of Sodium Chlorate C in Sodium Hypochlorite Solution for
Domestic uses
SASO GSO 802/GSO 801 Determination of Available chlorine (sodium hypochlorite) C in Sodium
Hypochlorite Solution for Domestic uses
SASO GSO 802/GSO ISO Determination of pH C in Sodium Hypochlorite Solution for Domestic uses
4316
SASO GSO 802/ISO 684 Determination of Total free alkali content C in Sodium Hypochlorite Solution for
Domestic uses
SASO GSO 884/GSO 883 Determination of Non-Volatile Matter in Liquid Glass Cleaner
SASO GSO 884/GSO 883 Determination of pH in Liquid Glass Cleaner
SASO GSO 884/ISO 760 Determination of Water Content in Liquid Glass Cleaner
SASO GSO 877/GSO ISO Determination of Moisture and volatile matter content in Soap Flakes
672
Chemistry - Soaps/Detergents
SASO GSO 151/ASTM Determination of Surface active Agents in Synthetic Detergents – Detergents
D1681-05 Powder
SASO GSO 151/GSO 152 Determination of Brightening agent in Synthetic Detergents – Detergents
Powder
SASO GSO 151/GSO 152 Determination of Rinsing properties in Synthetic Detergents – Detergents
Powder
SASO GSO 151/GSO 152 Determination of Total Heavy metals as (lead) in Synthetic Detergents –
Detergents Powder
SASO GSO 151/GSO ISO Determination of pH value in Synthetic Detergents – Detergents Powder
4316
SASO GSO 151/ISO 672 Determination of Moisture and volatile matter content
TL-564
SASO GSO 151/ISO 4313 Determination of Phosphate percentage in Synthetic Detergents – Detergents
Powder
SASO GSO 151/ISO 8215 Determination of Silicate percentage in Synthetic Detergents – Detergents
Powder
SASO GSO 391/GSO Determination of Anionic Surface-Active Agents in Liquid detergent for
2238/ASTM D1681-05 Dishwashing
SASO GSO 391/GSO Determination of Rinsing Properties in Liquid detergent for Dishwashing
2238/GSO 152
SASO GSO 391/GSO Determination of pH Value in Liquid detergent for Dishwashing

2238/GSO ISO 4316
SASO GSO 877/ISO 673 Determination of Ethanol-insoluble matter content in Soap Flakes
SASO GSO 877/ISO 684 Determination of Total free alkali content in Soap Flakes
SASO GSO 877/ISO 685 Determination of Total fatty matter content in Soap Flakes
SASO GSO 877/ISO 1067 Determination of Unsaponified saponifiable matter content in Soap Flakes
SASO GSO 877/GSO Determination of Chloride content in Soap Flakes

1095
SASO GSO 877/WMIP- Qualitative determination of Lard or lard derivatives in Soap Flakes
066
SASO GSO 1110/GSO Determination of Insoluble matter of Sodium Bicarbonate in water

1098
SASO GSO 1110/GSO Determination of pH of Sodium Bicarbonate

ISO 4316
SASO GSO 1786/GSO Determination of Toxic Heavy metals as lead in Beauty soap
152
SASO GSO 1786/ISO 456 Determination of Free Caustic Alkali Content in Beauty soap
SASO GSO 1786/ISO 457 Determination of Chloride content in Beauty soap
SASO GSO 1786/GSO Determination of moisture and volatile matter content in Beauty soap
ISO 672
SASO GSO 1786/ISO 673 Determination of Ethanol Insoluble Substances in Beauty soap
SASO GSO 1786/ISO 673 Determination of Ethanol-insoluble matter content in Beauty soap
SASO GSO 1786/ISO 684 Determination of Total Free Alkali Content in Beauty soap
SASO GSO 1786/ISO 685 Determination of Total fatty Matter in Beauty soap
SASO GSO 1786/ISO Determination of Unsaponifiable matter content in Beauty soap

1067
TL-564
SASO GSO 1786/GSO Determination of Water Insoluble Substances in Beauty soap
1098
SASO GSO 1786/GSO Acid number of fatty acids in Beauty soap

1098
SASO GSO 1786/ WMIP- Qualitative determination of Lard or lard derivatives in Beauty soap
066
SASO GSO 1894/GSO Total Heavy Metals as lead in Liquid hand soap
152
SASO GSO 1894/ISO 457 Determination of Chloride content in Liquid hand soap
SASO GSO 1894/ISO 673 Determination of Ethanol insoluble matter in Liquid hand soap
SASO GSO 1894/ISO 685 Determination of Total Alkali content in Liquid hand soap
SASO GSO 1894/ISO Determination of Unsaponified plus unsaponifiable matter in Liquid hand soap
1067
SASO GSO 1894/GSO Determination of Acid number of the mixture of fatty acids in Liquid hand soap
1098
SASO GSO 1894/GSO Determination of Water insoluble matter in Liquid hand soap
1098
SASO GSO 1894/GSO Determination of Resin acids in Liquid hand soap

1098
SASO GSO 1894/ASTM Determination of Anionic active matter in Liquid hand soap
D1681-05
SASO GSO 1894/GSO Determination of Miscibility with water in Liquid hand soap
1894
SASO GSO 1894/GSO Determination of Storage stability at 8° C to 40° C in Liquid hand soap
1894
SASO GSO 1894/GSO Determination of Total anhydrous soap, calculated as potash in Liquid hand
2018 soap
SASO GSO 1894/GSO Determination of Determination of Free acid, calculated as oleic acid in Liquid
2018 hand soap
SASO GSO 1894/GSO Determination of pH in Liquid hand soap

ISO 4316
SASO GSO 1894/USFDA- Determination of Total Bacterial content in Liquid hand soap
BAM Chapter 23
SASO GSO 1894/USFDA- Determination of Yeast in Liquid hand soap

BAM Chapter 23
TL-564
SASO GSO 1894/USFDA- Determination of Molds in Liquid hand soap
BAM Chapter 23
SASO GSO 1894/ WMIP- Qualitative determination of Lard & its derivatives in Liquid hand soap
066
SASO GSO 1895/GSO Determination of Total Heavy Metals as lead in Baby toilet soap
152
SASO GSO 1895/GSO Determination of Moisture & Volatile matter content in Baby toilet soap
ISO 672
SASO GSO 1895/ISO 684 Determination of Free alkali in Baby toilet soap
SASO GSO 1895/ISO 685 Determination of Total fatty matter in Baby toilet soap
SASO GSO 1895/GSO Determination of Water insoluble matter in Baby toilet soap
1098
SASO GSO 1895/GSO Determination of Acid number of fatty matter in Baby toilet soap
1098
SASO GSO 1895/WMIP- Qualitative determination of Lard & its derivatives in Baby toilet soap
066
SASO GSO 1942/GSO Determination of Toxic mineral elements as lead in Transparent Soap
152
SASO GSO 1942/ISO 456 Determination of Total free caustic alkali content in Transparent Soap
SASO GSO 1942/GSO Determination of Moisture and volatile matters in Transparent Soap
ISO 672
SASO GSO 1942/ISO 685 Determination of Total fatty matter contents in Transparent Soap
SASO GSO 1942/ISO Determination of Unsaponifiable matter contents in Transparent Soap

1067
SASO GSO 1942/GSO Determination of Water insoluble matter contents in Transparent Soap
1098
SASO GSO 1942/GSO Determination of Rosin acid content in Transparent Soap

1098
SASO GSO 1942/WMIP- Qualitative determination of Lard & its

066 derivatives in Transparent Soap
SASO GSO 1944/GSO Determination of Moisture and volatile matter content in Transparent, semi-
ISO 672 transparent and opaque glycerin soap
SASO GSO 1944/ISO 673 Determination of Ethanol insoluble matter content in Transparent, semi-
transparent and opaque glycerin soap
SASO GSO 1944/ISO 684 Determination of Total free alkali content (calculated as NaOH) in Transparent,
semi-transparent and opaque glycerin soap
TL-564
SASO GSO 1944/ISO 685 Determination of Total fatty matter content in Transparent, semi-transparent and
opaque glycerin soap
SASO GSO 1944/GSO Determination of Water insoluble matter content in Transparent, semi-
1098 transparent and opaque glycerin soap
SASO GSO 1944/GSO Determination of Free acids content (calculated as Lauric Acid) in Transparent,
2018 semi-transparent and opaque glycerin soap
SASO GSO 1946/GSO Determination of Total heavy metal (as lead) in Synthetic Detergents for Kitchen
152
SASO GSO 1946/GSO Determination of surface active agent equivalent content in Synthetic
1947 Detergents for Kitchen
SASO GSO 1946/GSO Determination of Fluorescent Brightener in Synthetic Detergents for Kitchen
1947
SASO GSO 1946/GSO Determination of pH in Synthetic Detergents for Kitchen

1947
SASO GSO 1948/GSO Determination of Total Solids in Germicidal liquid detergents for general
1949 purposes
SASO GSO 1948/GSO Determination of pH in Germicidal liquid detergents for general purposes
1949
SASO GSO 1948/GSO Determination of Stability to hard water test in Germicidal liquid detergents for
1949 general purposes
SASO GSO 1948/GSO Determination of Stability at low temperature in Germicidal liquid detergents for
1949 general purposes
SASO GSO 1948/GSO Determination of Germicidal Activity in Germicidal liquid detergents for general
1949/BS EN 1276 purposes
SASO GSO 2059/ASTM Determination of pH Ionic material percentage (Anionic active Matter) in
D1681-05 Synthetic liquid detergents for Clothing and fabrics
SASO GSO 2059/GSO Determination of pH Optical Brightener in Synthetic liquid detergents for
152 Clothing and fabrics
SASO GSO 2059/GSO Determination of pH in Synthetic liquid detergents for Clothing and fabrics
2060
SASO GSO 2059/GSO Determination of pH Total active matter in Synthetic liquid detergents for
SASO GSO 2059/ISO Determination of pH Phosphate percentage in Synthetic liquid detergents for
SASO GSO 2059/ISO Determination of pH Silicate percentage in Synthetic liquid detergents for
TL-564
SASO GSO 2077/GSO Determination of Percent active material in Colored textiles detergent
2078
SASO GSO 2077/GSO Determination of pH in Colored textiles detergent

2078
SASO GSO 2161/GSO Determination of pH in Chemical Detergents - Multipurpose gel

2060
SASO GSO 2161/GSO Determination of Total active matter in Chemical Detergents - Multipurpose gel
2060
SASO GSO 2161/GSO Determination of Chloride content in Chemical Detergents - Multipurpose gel
2060
SASO GSO 2161/GSO Determination of Anionic active matter in Chemical Detergents - Multipurpose
2060/ASTM D1681-05 gel
SASO GSO 2161/GSO Determination of Phosphate content in Chemical Detergents - Multipurpose gel
2060/ISO 4313
SASO GSO 2161/GSO Determination of Silicate content in Chemical Detergents - Multipurpose gel
2060/ISO 8215
SASO GSO 2172/ISO 457 Determination of Chloride content in Olive oil soap
SASO GSO 2172/ISO 673 Determination of Alcohol insoluble matter content in Olive oil soap
SASO GSO 2172/ISO 684 Determination of Free alkali matter content in Olive oil soap
SASO GSO 2172/ISO 685 Determination of Total fatty matter in Olive oil soap
SASO GSO 2172/ISO Determination of Saponified and unsaponified fatty material in Olive oil soap
1067
SASO GSO 2172/ISO Determination of Unsaponified fatty matter in Olive oil soap
1067
SASO GSO 2172/GSO Determination of Water insoluble materials in Olive oil soap
1098
SASO GSO 2172/GSO Determination of Moisture & volatile matter content in Olive oil soap
ISO 672
SASO GSO 2234/ASTM D Determination of Anionic active matter in Detergents - grease stain remover for
1681-05 clothes and textiles
SASO GSO 2234/ISO Determination of Non-ionic active matter in Detergents - grease stain remover
2268 for clothes and textiles
SASO GSO 2234/GSO Determination of pH in Detergents - grease stain remover for clothes and
ISO 4316 textiles
SASO GSO 2301/ISO 760 Determination of Humidity in Synthetic Detergent in the form of paste for
clothing
TL-564
SASO GSO 2301/GSO Determination of Total active substances in Synthetic Detergent in the form of
2301 paste for clothing
SASO GSO 2301/ISO Determination of Phosphate in Synthetic Detergent in the form of paste for
4313 clothing
SASO GSO 2301/GSO Determination of pH in Synthetic Detergent in the form of paste for clothing
ISO 4316
SASO GSO 2301/ISO Determination of Silicates in Synthetic Detergent in the form of paste for
8215 clothing
SASO GSO 2301/ASTM Determination of Anionic active matter in Synthetic Detergent in the form of
D1681-05 paste for clothing
SASO GSO 2439/GSO Determination of Phosphate Salts or sodium Carbonate in Detergents -

152 Abrasive powder
SASO GSO 2439/GSO Determination of Volatile Matter in Detergents - Abrasive powder

ISO 672
SASO GSO 2439/ISO 684 Determination of Free Alkali in Detergents - Abrasive powder
SASO GSO 2439/GSO Determination of Free chlorine in Detergents - Abrasive powder

801
SASO GSO 2439/GSO Determination of Water insoluble matter contents in Detergents - Abrasive
1098 powder
SASO GSO 2439/GSO Determination of pH in Detergents - Abrasive powder

ISO 4316
Personal Protective Equipment
EN 443 Firefighting helmets. Determination of Surface Finish
EN 443 Firefighting helmets. Determination of Visual Defects
EN 469/BS EN ISO 4674-1 Firefighting clothes. Rubber- or plastics-coated fabrics. Determination of tear
resistance. Constant rate of tear methods
EN 469/ISO 5077 Firefighting clothes. Dimensional Change
EN 469/EN ISO 13934-1 Firefighting clothes. Textiles — Tensile properties of fabrics — Part 1:
Determination of maximum force and elongation at maximum force using the
strip method
EN 469/ISO 17493 Firefighting clothes. Clothing and equipment for protection against heat — Test
method for convective heat resistance using a hot air circulating oven- ISO
17493
EN 659 Firefighting gloves: Determination of general Requirement
EN 659 Firefighting gloves: Determination of size
TL-564
EN 659 Firefighting gloves: Tear Resistance test
Chemistry – Paints and Varnishes
ASTM D1210 Standard test method for fineness of dispersion of pigment-vehicle by Hegman-
type gage
ASTM D1640/D1640M Standard test methods for drying, curing, or film formation of organic coatings
ASTM D2486-069:2012 Standard test methods for scrub resistance of wall paints
ASTM D2805-11 Standard test method for hiding power of paints by reflectometry
ASTM D3359 Standard test method for measuring adhesion by tape test
ASTM D3363-05:2011 Standard test method for film hardness by pencil test
ASTM D4541 Standard test method for pull-off strength of coatings using portable adhesion
testers
BS 3900-0 Methods of test for paints-index of test methods (section C5)
BS EN ISO 2808 Paints and varnishes-determination of film thickness (method 7)
EN 1062-3 Paints and varnishes. Coating materials and coating systems for exterior
masonry and concrete: Determination of liquid water permeability
masonry and concrete: Determination of carbon dioxide permeability
masonry and concrete: Determination of crack bridging properties
ISO 1519 Paints and varnishes — Bend test (cylindrical mandrel)
ISO 1524 Paints, varnishes and printing inks — Determination of fineness of grind
ISO 2811-1 Paints and varnishes — Determination of density — Part 1: Pycnometer method
ISO 2812-1 Paints and varnishes — Determination of resistance to liquids — Part 1:

Immersion in liquids other than water
ISO 2812-4 Paints and varnishes — Determination of resistance to liquids
EN ISO 2813 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees
and 85 degrees
ISO 2813 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees
and 85 degrees
ISO 3233 Paints and varnishes — Determination of the percentage volume of non-volatile
matter — Part 1: Method using a coated test panel to determine non-volatile
matter and to determine dry film density by the Archimedes principle
ISO 3251 Paints, varnishes and plastics — Determination of non-volatile-matter content
TL-564
ISO 6272-1 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1:
Falling-weight test, large-area indenter
ISO 6504-3 Paints and varnishes — Determination of hiding power — Part 3: Determination
of contrast ratio of light-colored paints at a fixed spreading rate
EN ISO 7783-1 & 2 Paints and varnishes — Determination of water-vapour transmission properties
— Cup method
ISO 9117-4 Paints and varnishes — Drying tests
ISO 16474-3 Paints and varnishes — Methods of exposure to laboratory light sources — Part
3: Fluorescent UV lamps
KSW 19 PART 1 / KWS Qualitative Composition Analysis of paints by FTIR

18/WL-IP-200
MPI #4 Block filler, latex, interior/exterior (clause 4.1/ASTM standard D2697)
MPI #50 Primer sealer, latex, interior (clauses 4.6 and 7.3)
MPI #77 Epoxy, gloss (clauses 4.7 and 7/ASTM standard D2794)
MPI #79 Primer, alkyd, anti-corrosive for metal (clauses 4.5 and 7.5/ ASTM standard
D2794)
MPI #143 Latex, interior, institutional low odor/VOC, flat (MPI gloss level 1) (clause
4.1/ASTM standards D1640, D1210 and EPA 24)
(Clause 4.4 and 7.2), (Clauses 4.7 and 7.5/ASTM D 522) and (Clauses 4.8 and
7.9)
SASO 268/SASO 1524 Determination of Fineness of Grid in Paints and Varnish – Alkyd Red iron oxide
Metal Primer.
SASO 470/ASTM D2196 Determination of Consistency Paints and Varnish - Emulsion paints
SASO 470/ SASO ISO Determination of Flexibility and adhesion Paints and Varnish - Emulsion paints
1519
SASO 470/ SASO 2063 Determination of Dry Opacity Paints and Varnish - Emulsion paints
SASO 470/ SASO ISO Determination of Water resistance Paints and Varnish - Emulsion paints
2812-1
SASO 470/ SASO ISO Determination of Alkali Resistance Paints and Varnish - Emulsion paints
2812-1
SASO 470/SASO ISO Determination of Gloss Paints and Varnish - Emulsion paints
2813
SASO 470/SASO ISO Determination of Non-Volatile Content in Paints and Varnish - Emulsion paints
3251
SASO 470/ SASO ISO Temperature Stability Paints and Varnish - Emulsion paints
3668
TL-564
SASO 470/ SASO ISO Determination of Drying time Paints and Varnish - Emulsion paints
6503
SASO 470/ SASO ISO Determination of Scrub Resistance Paints and Varnish - Emulsion paints
11998
SASO 470/ SASO ISO Determination of Accelerated Weathering Paints and Varnish - Emulsion paints
16474-3
SASO 470/WL-IP-028 Determination of Lead Content Paints and Varnish - Emulsion paints
SASO 470/WL-IP-028 Determination of Lead Content in Paints and Varnish-alkyd Flat paints.
SASO 470/WL-IP-028 Determination of Lead content in Paints and Varnish - Emulsified primer paints.
SASO 470/WL-IP-200 Qualitative Composition Analysis of Paints and varnishes by FTIR
SASO 819 (GSO 452) Road marking paints
SASO 928 (GSO 561) Road marking paints-test methods
SASO 1188/SASO ISO Determination of Nonvolatile content in Paints and Varnish – Alkyd Red iron
3251 oxide Metal Primer.
SASO 2060 Determination of Thinning in Paints and Varnish - Emulsified primer paints.
SASO 2060 Determination of Fineness of grind in Paints and Varnish - Emulsified primer
paints.
SASO 2060/SASO ISO Determination of Flexibility and adhesion in Paints and Varnish - Emulsified
1519 primer paints.
SASO 2060/SASO 2194 Determination of Consistency in Paints and Varnish - Emulsified primer paints.
SASO 2060/ SASO ISO Determination of Water Resistance in Paints and Varnish - Emulsified primer
2812-1 paints.
SASO 2060/ SASO ISO Determination of Alkali Resistance in Paints and Varnish - Emulsified primer
2812-1 paints.
SASO 2060/SASO ISO Determination of Nonvolatile content in Paints and Varnish - Emulsified primer
3251 paints.
SASO 2060/ SASO 11998 Determination of Scrub resistance in Paints and Varnish - Emulsified primer
paints.
SASO 2060/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish - Emulsified primer
paints by FTIR
SASO 2194/SASO Determination of Consistency in Paints and Varnish – Alkyd Red iron oxide
2194/ASTMD 2196 Metal Primer.
SASO 2397/SASO ISO Determination of Nonvolatile content in Dryers for liquid paints
3251
TL-564
SASO 2397/WL-IP-028 Determination of Metal concentration (Lead, cadmium, Arsenic, Chromium) in
Dryers for liquid paints
SASO GSO ISO 2590/ Determination of arsenic in Paints and varnishes

WL-IP-028
SASO 2624/SASO ISO Determination of Accelerated weathering 250 hours in Paints and Varnish –
16474-3 Water texture -based paints.
SASO 2626 Determination of Thinning in Paints and Varnish – Water texture -based paints.
SASO 2626 Determination of Drying time in Paints and Varnish – Water texture -based
paints.
SASO 2626/ASTM D2196 Determination of Temperature stability in Paints and Varnish – Water texture -
based paints.
SASO 2626/ASTM D2196 Determination of Heat Stability in Paints and Varnish – Water texture -based
paints.
SASO 2626/SASO Determination of Nonvolatile content in Paints and Varnish– Water texture -
1188/SASO ISO 3251 based paints.
SASO 2626/SASO Determination of Consistency in Paints and Varnish – Water texture -based
2194/ASTM D2196 paints.
SASO 2626/SASO ISO Determination of Water resistance in Paints and Varnish – Water texture -based
2812-2 paints.
SASO 2626/SASO ISO Determination of Alkali resistance in Paints and Varnish – Water texture -based
2812-2 paints.
SASO 2626/WL-IP-028 Determination of Lead content in Paints and Varnish – Water texture -based
paints.
SASO 2626/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish – Water texture -based
paints.by FTIR
SASO 2627/SASO 1188 Determination of Non volatile content in Paints and Varnish - Roof coatings
(water based).
SASO 2627/SASO ISO Determination of Flexibility in Paints and Varnish - Roof coatings (water based).
1519
SASO 2627/SASO Determination of Consistency in Paints and Varnish - Roof coatings (water
2194/ASTM D 2196 based).
SASO 2627/SASO ISO Determination of Water Vapour transmission in Paints and Varnish - Roof
7783-2 coatings (water based).
SASO 2627/WL-IP-028 Determination of Lead Content in Paints and Varnish - Roof coatings (water
based).
SASO 2628 Determination of Thinning in Paints and Varnish – Alkyd Red iron oxide Metal
Primer.
TL-564
SASO 2628/SASO ISO Determination of Flexibility and adhesion in Paints and Varnish – Alkyd Red iron
1519 oxide Metal Primer.
SASO 2628/SASO ISO Determination of Drying Time in Paints and Varnish – Alkyd Red iron oxide
9117-1 Metal Primer.
SASO 2628/SASO ISO Determination of Salt spray in Paints and Varnish – Alkyd Red iron oxide Metal
9227 Primer.
SASO 2628/WL-IP-028 Determination of Lead Content in Paints and Varnish – Alkyd Red iron oxide
Metal Primer.
SASO 2628/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish – Alkyd Red iron oxide
Metal Primer.by FTIR
SASO 2629/SASO 592 Determination of Drying time in Paints and Varnish - Anti-alkali primer paints
based on solvent.
SASO 2629/SASO 593 Determination of Flexibility and adhesion in Paints and Varnish - Anti-alkali
primer paints based on solvent.
SASO 2629/SASO 779 Determination of Fineness of Grid in Paints and Varnish - Anti-alkali primer
paints based on solvent.
SASO 2629/SASO 861 Determination of Dried paint layer in Paints and Varnish - Anti-alkali primer
SASO 2629/SASO 1188 Determination of Nonvolatile content in Paints and Varnish - Anti-alkali primer
SASO 2629/SASO 2063 Determination of Dry opacity in Paints and Varnish - Anti-alkali primer paints
based on solvent.
SASO 2629/SASO 2094 Determination of Alkali resistance in Paints and Varnish - Anti-alkali primer
SASO 2629/SASO 2194 Determination of Consistency in Paints and Varnish - Anti-alkali primer paints
based on solvent.
SASO 2629/WL-IP-028 Determination of Lead content in Paints and Varnish - Anti-alkali primer paints
based on solvent.
SASO 2701/ASTM D1211 Determination of Temperature Change Resistance in Paint and Varnish
Nitrocellulose paste
SASO 2701/SASO ISO Determination of Nonvolatile content in Paint and Varnish Nitrocellulose paste
3251
SASO 2701/SASO ISO Determination of Drying time in Paint and Varnish Nitrocellulose paste
9117-3
SASO2701/WL-IP-028 Determination of total lead content in Paint and Varnish Nitrocellulose paste
SASO 2702 Determination of Appearance of dried film in Paints and Varnish - Nitrocellulose
clear Topcoat
TL-564
SASO 2702 Determination of Temperature resistance
SASO 2702/SASO ISO Determination of Drying time in Paints and Varnish - Nitrocellulose clear
917-4 Topcoat
SASO 2702/SASO ISO Determination of Flexibility in Paints and Varnish - Nitrocellulose clear Topcoat
1519
SASO 2702/SASO ISO Determination of Fineness of grind in Paints and Varnish - Nitrocellulose clear
1524 Topcoat
SASO 2702/SASO 2194 Determination of Consistency in Paints and Varnish - Nitrocellulose clear
Topcoat
SASO 2702/SASO ISO Determination of Adhesion in Paints and Varnish - Nitrocellulose clear Topcoat
2409
SASO 2702/SASO ISO Determination of Gloss in Paints and Varnish - Nitrocellulose clear Topcoat
2813
SASO 2702/SASO ISO Determination of Non volatile content in Paints and Varnish - Nitrocellulose
3251 clear Topcoat
SASO 2702/ WL-IP-028 Determination of Lead Content in Paints and Varnish - Nitrocellulose clear
Topcoat
SASO 2702/ WL-IP-200 Qualitative Composition Analysis of Paints and Varnish - Nitrocellulose clear
Topcoat by FTIR
SASO 2703 Determination of Appearance of dried film in Paints and Varnish – nitrocellulose
Paint tinned base
SASO 2703/SASO 592 Determination of Drying time
SASO 2703/SASO 779 Determination of Fineness of grind in Paints and Varnish – nitrocellulose Paint
tinned base
SASO 2703/SASO 1188 Determination of Non volatile content in Paints and Varnish – nitrocellulose
Paint tinned base
SASO 2703/SASO 2063 Determination of Dry opacity in Paints and Varnish – nitrocellulose Paint tinned
base
SASO 2703/SASO 2703 Determination of Consistency in Paints and Varnish – nitrocellulose Paint tinned
base
SASO 2703/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish – nitrocellulose Paint
tinned base by FTIR
SASO 2704 Determination of Appearance of dried paint layer in Paints and Varnish -
Nitrocellulose Pigmented Topcoats
SASO 2704 Determination of Resistance to heat change in Paints and Varnish -

Nitrocellulose Pigmented Topcoats
TL-564
SASO 2704/SASO 592 Determination of Surface Drying time in Paints and Varnish - Nitrocellulose
Pigmented Topcoats
SASO 2704/SASO 593 Determination of Flexibility in Paints and Varnish - Nitrocellulose Pigmented
Topcoats
SASO 2704/SASO 779 Determination of Fineness of grind in Paints and Varnish - Nitrocellulose
Pigmented Topcoats
SASO 2704/SASO 1188 Determination of Nonvolatile content in Paints and Varnish - Nitrocellulose
Pigmented Topcoats
SASO 2704/SASO 2062 Determination of Gloss in Paints and Varnish - Nitrocellulose Pigmented
Topcoats
SASO 2704/SASO 2063 Determination of Dry Opacity in Paints and Varnish - Nitrocellulose Pigmented
Topcoats
SASO 2704/SASO 2064 Determination of Accelerated weathering in Paints and Varnish - Nitrocellulose
Pigmented Topcoats
SASO 2705 Determination of Condition in container in Paints and varnish- Solvent based
acrylic paints
SASO 2705 Determination of Application properties in Paints and varnish- Solvent based
acrylic paints
SASO 2705/SASO 477 Determination of Scratch resistance in Paints and varnish- Solvent based
acrylic paints
SASO 2705/SASO 478 Determination of Water resistance in Paints and varnish- Solvent based acrylic
paints
SASO 2705/SASO 592 Determination of Drying time in Paints and varnish- Solvent based acrylic paints
SASO 2705/SASO 593 Determination of Flexibility and adhesion in Paints and varnish- Solvent based
acrylic paints
SASO 2705/SASO 779 Determination of Fineness of Grid in Paints and varnish- Solvent based acrylic
paints
SASO 2705/SASO 1188 Determination of Nonvolatile content in Paints and varnish- Solvent based
acrylic paints
SASO 2705/SASO 2062 Determination of Gloss in Paints and varnish- Solvent based acrylic paints
SASO 2705/SASO 2063 Determination of Dry opacity in Paints and varnish- Solvent based acrylic paints
SASO 2705/SASO 2064 Determination of Accelerated weathering in Paints and varnish- Solvent based
acrylic paints
SASO 2705/SSO 2194 Determination of Consistency in Paints and varnish- Solvent based acrylic
paints
TL-564
SASO 2705/WL-IP-200 Qualitative Composition Analysis of Paints and varnish- Solvent based acrylic
paints by FTIR
SASO 2705/WL-IP-028 Determination of Lead content in Paints and varnish- Solvent based acrylic
paints
SASO 2831 Determination of Pot life in Paints and Varnish - Polyurethane sanding sealer
SASO 2831 Determination of Appearance of dried film in Paints and Varnish - Polyurethane
sanding sealer
SASO 2831 Determination of Temperature change resistance in Paints and Varnish -

Polyurethane sanding sealer
SASO 2831/SASO Determination of Drying time in Paints and Varnish - Polyurethane sanding
592/SASO 861 sealer
SASO 2831/SASO 779 Determination of Fineness of grind in Paints and Varnish - Polyurethane
sanding sealer
SASO 2831/SASO 1188 Determination of Non volatile content in Paints and Varnish - Polyurethane
sanding sealer
SASO 2831/SASO Determination of Consistency in Paints and Varnish - Polyurethane sanding

2194/ASTM D2196 sealer
SASO 2831/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish - Polyurethane sanding
sealer by FTIR
SASO 2832 Determination of Pot life in Paints and Varnish – Polyurethane Primer Surface
SASO 2832 Determination of Thinning in Paints and Varnish – Polyurethane Primer Surface
SASO 2832 Determination of Appearance of dried film in Paints and Varnish – Polyurethane
Primer Surface
SASO 2832/SASO 477 Determination of Scratch resistance in Paints and Varnish – Polyurethane
Primer Surface
SASO 2832/SASO Determination of Drying time in Paints and Varnish – Polyurethane Primer
592/SASO 861 Surface
SASO 2832/SASO 593 Determination of Flexibility and adhesion in Paints and Varnish – Polyurethane
Primer Surface
SASO 2832/SASO 779 Determination of Fineness of grind in Paints and Varnish – Polyurethane Primer
Surface
SASO 2832/SASO 1188 Determination of Non volatile matter in Paints and Varnish – Polyurethane
Primer Surface
SASO 2832/SASO 2063 Determination of Dry opacity in Paints and Varnish – Polyurethane Primer
Surface
TL-564
SASO 2832/SASO Determination of Consistency in Paints and Varnish – Polyurethane Primer
2194/ASTM D2196 Surface
SASO 2832/SASO 2708 Determination of Adhesion cross cut in Paints and Varnish – Polyurethane
Primer Surface
SASO 2832/SASO 2832 Determination of Impact test in Paints and Varnish – Polyurethane Primer
Surface
SASO 2832/WL-IP-200 Qualitative Composition Analysis of Paints and Varnish – Polyurethane Primer
Surface by FTIR
SASO 2833 Determination of Pot life in Paint and varnish – solvent based Polyurethane
Paints
SASO 2833/SASO 477 Determination of Scratch resistance in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/SASO Determination of Drying time in Paint and varnish – solvent based Polyurethane
592/SASO 861 Paints
SASO 2833/SASO 593 Determination of Flexibility and adhesion in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/SASO 779 Determination of Fineness of grind in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/SASO 1188 Determination of Non-volatile matter in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/SASO 2062 Determination of Gloss in Paint and varnish – solvent based Polyurethane
Paints
SASO 2833/SASO 2063 Determination of Dry opacity in Paint and varnish – solvent based Polyurethane
Paints
SASO 2833/SASO 2064 Determination of Accelerated weathering 700 hours in Paint and varnish –
solvent based Polyurethane Paints
SASO 2833/SASO 2094 Determination of Alkali resistance in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/SASO 2194 Determination of Consistency in Paint and varnish – solvent based
Polyurethane Paints
SASO 2833/WL-IP-200 Qualitative Composition Analysis of Paint and varnish – solvent based
Polyurethane Paints by FTIR
SASO 2834 Determination of Consistency in Paints and Varnishes-Solvent Based

Polyurethane Clear
SASO 2834 Determination of Pot life in Paints and Varnishes-Solvent Based Polyurethane
Clear
TL-564
SASO 2834 Determination of Impact Resistance in Paints and Varnishes-Solvent Based
Polyurethane Clear
SASO 2834/SASO 477 Determination of Scratch resistance in Paints and Varnishes-Solvent Based
Polyurethane Clear
SASO 2834/SASO Determination of Drying time in Paints and Varnishes-Solvent Based

592/SASO 861 Polyurethane Clear
SASO 2834/SASO 593 Determination of Adhesion and flexibility in Paints and Varnishes-Solvent Based
Polyurethane Clear
SASO 2834/SASO 779 Fineness of grind in Paints and Varnishes-Solvent Based Polyurethane Clear
SASO 2834/SASO 1188 Determination of Nonvolatile content in Paints and Varnishes-Solvent Based
Polyurethane Clear
SASO 2834/SASO 2062 Determination of Gloss in Paints and Varnishes-Solvent Based Polyurethane
Clear
SASO 2834/SASO 2064 Determination of Accelerated weathering 500 hours in Paints and Varnishes-
Solvent Based Polyurethane Clear
SASO 2834/SASO 2094 Determination of Alkali resistance in Paints and Varnishes-Solvent Based
Polyurethane Clear
SASO 2834/WL-IP-200 Qualitative Composition Analysis of Paints and Varnishes-Solvent Based

Polyurethane Clear by FTIR
SASO 2881/SASO ISO Determination of Scratch Resistance in Paints and Varnish-alkyd Flat paints.
1518-1
SASO 2881/SASO ISO Determination of Flexibility and adhesion in Paints and Varnish-alkyd Flat
1519 paints.
SASO 2881/ISO 1524 Determination of fineness of Dispersion in Paints and Varnish-alkyd Flat paints.
SASO 2881/SASO 2063 Determination of Dry Opacity in Paints and Varnish-alkyd Flat paints.
SASO 2881/SASO 2194 Determination of Consistency in Paints and Varnish-alkyd Flat paints.
SASO 2881/SASO ISO Determination of Gloss in Paints and Varnish-alkyd Flat paints.
2813
SASO 2881/ISO 3251 Determination of Non-Volatile Content in Paints and Varnish-alkyd Flat paints.
SASO 2881/SASO ISO Determination of Accelerated Weathering in Paints and Varnish-alkyd Flat
16474-3 paints.
SASO GSO ISO 3856- Determination of lead content in Paints and varnishes
1/WL-IP-028
SASO GSO ISO 3856-4/ Determination of cadmium content in Paints and varnishes
WL-IP-028
TL-564
SASO GSO ISO 11890-1 Paints and varnishes — Determination of volatile organic compound (VOC)
content — Part 1: Difference method
Automobile Parts
ASTM A1073 Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet:
Standard Practice for Using Hand Micrometers to Measure the Thickness
ASTM A1087 Steel Sheet: Standard Practice for Using Hand Calipers to Measure the Width
of Steel Sheet
GSO 135 Motor Vehicles Method of Test for Engine Radiators clause 5 Corrosion
Resistant Test and clause 6 Leakage Test
GSO ISO 6312 Road vehicles - Brake linings - Shear test procedure for disc brake pad and
drum brake shoe assemblies
GSO ISO 6314 Road vehicles - Brake linings - Resistance to water, saline solution, oil and
brake fluid - Test procedure
SASO GSO ECE 90 Replacement brake lining assemblies and drum brake linings for power-driven
vehicles and their trailers: General requirements
SASO GSO ECE 90/ISO Replacement brake lining assemblies and drum brake linings for power-driven
6310 vehicles and their trailers: Compressibility
SASO 526/SASO 525 Motor vehicles – safety belts: Breaking strength of the webbing
SASO 526/SASO 525 Motor vehicles – safety belts: Resistance to heat temperature
SASO 526/SASO 525 Motor vehicles – safety belts: Resistance to low temperature
SASO 526/SASO 525 Motor vehicles – safety belts: Resistance of straps to light
SASO 526/SASO 525 Motor vehicles – safety belts: Wet strength test
SASO 769 Door Locks- Hinges: Corrosion test for door locks and hinges
SASO 769 Door Locks- Hinges: Longitudinal load test (Static test for latch and striker)
SASO 769 Door Locks- Hinges: Transverse load test (Static test for latch and striker)
SASO 769 Door Locks- Hinges: Inertia load test (Dynamic test for latch and striker)
SASO 769 Door Locks- Hinges: Longitudinal load test (Static test for hinges)
SASO 769 Door Locks- Hinges: Transverse load test (Static test for hinges)
SASO 771 Motor vehicles Rear view mirrors: Dimensions
SASO 1315 head restraints (headrests) mirrors: Dimensions
SASO 1315 head restraints (headrests) mirrors: Height Determination
SASO 1315 head restraints (headrests) mirrors: Width Determination
TL-564
SASO 1315 head restraints (headrests) mirrors: Static Test
SASO 1315 head restraints (headrests) mirrors: Dynamic Test
SASO 1315 head restraints (headrests) mirrors: Endurance Test
SASO 2210/SASO 2209 Child restraint system: Breaking strength of the webbing
SASO 2210/SASO 2209 Child restraint system: Resistance of strap to light

Child restraint system: Resistance of strap to cold
Child restraint system: Resistance of strap to heat
Child restraint system: Resistance of strap to water
SASO GSO ISO 3412 Spark Plug: Test for dimension of spark-plug Spark Plug: Test for dimension of
connection
SASO ISO 3895 Spark Plug: Test for dimension and thread
Spark Plug: Test for other dimensions of sparkplugs and housing in the cylinder
head
SASO ISO 3896 Vehicle Filters (Air - Oil - Fuel): Test for Dimension and thread
SASO GSO ISO 4000-2 Passenger car tyres and rims: Dimensions
SASO GSO ISO 4209-2 Truck and bus tyres and rims (metric series): Dimensions
SASO ISO 4548-6 Vehicle Filters (Oil). Methods of test for full-flow lubricating oil filters for internal
combustion engines – Part 6: Static burst pressure test
SASO ISO 6415 Internal combustion engines — Spin-on filters for lubricating oil: Dimensions
Test
SASO ISO 7654 Road vehicles — Spin-on fuel filters for diesel engines — Mounting and
connecting dimensions: Dimensions and tolerance test
SASO ISO 9010 Synchronous belt drives — Automotive belts: Dimensions and tolerances test
SASO ISO 9010 Synchronous belt drives — Automotive belts Pitch: length measurement
SASO ISO 9011 Synchronous belt drives — Automotive pulleys: Tooth Profile test
SASO ISO 9011 Synchronous belt drives — Automotive pulleys Pulley: dimension and
tolerances test
SASO-ISO-9258 Passenger cars — Wiper systems: Determination of wiper blade length
SASO-ISO-9259 Passenger cars — Windscreen wiper systems — Wiper arm-to-blade

connections: Dimensions test
SASO-ISO-9704 Passenger cars — Wiper systems — Shaft ends and arm-holes: dimensions
test
Batteries
TL-564
IEC-60095-1 – Clause 9.1 Lead-acid starter batteries - Part 1: General requirements and methods of test-
20 hr Capacity check
Reverse capability check testing
Cranking performance test
Charge acceptance test
Charge retention test
IEC-60095-1 – Clause Lead-acid starter batteries - Part 1: General requirements and methods of test-
9.6.1 Corrosion test
IEC-60095-1 – Clause Lead-acid starter batteries - Part 1: General requirements and methods of test-
9.6.2 Optional endurance cycle test
Water consumption test
Electrolyte retention test
ISO 11565 - Clause 3.3 Road vehicle- Spark plugs Test method and requirements- Dimension
ISO 11565 - Clause 3.4.2 Road vehicle- Spark plugs Test method and requirements- Tear off resistance
of the high-voltage terminal
SASO 1919-GSO 34 - Lead-acid starter batteries used for motor vehicles and internal combustion
Clause 6.1 engines-Rapid discharge capability test
SASO 1919-GSO 34 – Lead-acid starter batteries used for motor vehicles and internal combustion
Clause 6.2 engines-Rated capacity test
Clause 6.3 engines-Rapid discharge at low temperature test
Clause 6.4 engines-Reverse capacity test
Clause 6.5 engines-Charge acceptance test
Clause 6.6 engines- Conservation of charge
Clause 6.7 engines- Battery life testing
Clause 6.8 engines-Water consumption test
TL-564
Clause 6.9 engines-Leakage of air testing
Clause 6.10 engines-Leakage of electrolyte testing
Clause 7.2 engines-Electrolyte retention test
Clause 7.3 engines-Determination of strength of terminals
SASO ISO 3537 – Clause Road vehicles - Safety glazing materials - Mechanical tests- Abrasion
8 resistance test
SASO ISO 3917 – Clause Road vehicle – safety glazing materials- Resistance to high temperature and
7&8 Resistance of Humidity
SASO ISO 17751 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere,
wool, speciality fibres and their blends
SASO ISO 28741 – Road Vehicle – Spark plugs and their cylinder head housings- Dimension
Clause 5
SASO IEC 60095-4 Lead-acid starter batteries – Part 4: Dimensions of batteries for heavy vehicles
SASO IEC 60254-2 Lead-acid traction batteries – Part 2: Dimensions of cells and terminals and
marking of polarity on cells
SASO IEC 61056-2 General purpose lead-acid batteries (valve-regulated types) – Part 2:
Dimensions, terminals and marking
Ceramic Tiles
SASO ASTM C56/ASTM Standard specification for Structural clay Nonloadbearing Tile-Finish and
C56 Appearance
SASO ASTM C56/ASTM Standard specification for Structural clay Nonloadbearing Tile-Number of cells
C56 and weight
SASO ASTM C56/ASTM Standard specification for Structural clay Nonloadbearing Tile-Dimension
C67
SASO ASTM C62/ASTM Standard specification for Building Brick (Solid Masonry Unit made from clay or
C67 shale)-Compressive strength
C67 shale)-Dimensional properties
C67 shale)-Water absorption
ASTM C67 Standard test method for sampling and Testing bricks and structurally clay tile-
Flexural Strength, Compressive strength & Water absorption
TL-564
ASTM C134 Standard test method strength of individual stone anchorages in dimension
stone
SASO ASTM C212/ASTM Standard specification for Structural clay Facing tile-Compressive Strength
C67
SASO ASTM C212/ASTM Standard specification for Structural clay Facing tile-Dimensional Properties
C67
SASO ASTM C212/ASTM Standard specification for Structural clay Facing tile-Water absorption
C67
SASO ASTM C216/ASTM Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or
C67 Shale)- Compressive Strength
C67 Shale)- Dimensional Properties
C67 Shale)- Water absorption
SASO ASTM C503/ASTM Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension
C97 Stone
SASO ASTM C503/ASTM Standard Test Method for Modulus of Rupture of Dimension Stone
C99
SASO ASTM C503/ASTM Standard Test Method for Compressive Strength of Dimension Stone
C170
SASO ASTM C503/ASTM Standard Test Method for Flexural Strength of Dimension Stone
C880
SASO ASTM C503/ASTM Standard Test Method for Abrasion Resistance of Dimension Stone Subjected
C1353 to Foot Traffic Using a Rotary Platform Abraser
SASO ASTM C615/ASTM Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension
C97 Stone
SASO ASTM C615/ASTM Standard Test Method for Modulus of Rupture of Dimension Stone
C99
SASO ASTM C615/ASTM Standard Test Method for Compressive Strength of Dimension Stone
C170
SASO ASTM C615/ASTM Standard Test Method for Flexural Strength of Dimension Stone
C880
SASO ASTM C615/ASTM Standard Test Method for Abrasion Resistance of Dimension Stone
C1353 Subjected to Foot Traffic Using a Rotary Platform Abraser
SASO ASTM C629/ASTM Standard test method for Flexural testing of Structural and Roofing slate-
C120 Modulus of rupture
TL-564
SASO ASTM C629/ASTM Standard Test Method for water Absorption of slate
C121
SASO ASTM C629/ASTM Standard test method for abrasion resistance of dimension stone subjected to
C1353 foot traffic using a rotary platform abraser
SASO ASTM C652/ASTM Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay
C67 or Shale)- Compressive strength
C67 or Shale)-Dimensional Properties
C67 or Shale)-Water absorption
SASO ASTM C658/ASTM Standard Specification for Chemical Resistance Resin Grout for Brick or Tile-
C307 Tensile Strength
C413 Water Absorption
C579 Compressive Strength
SASO ASTM Standard test method for compressive strength of Architectural cast stone
C1364/ASTM C1194
SASO ASTM Standard Specification for Glazed Brick (Single Fired, Brick Units)-Compressive
C1405/ASTM C67 Strength
SASO ASTM Standard Specification for Glazed Brick (Single Fired, Brick Units)-Dimensional
C1405/ASTM C67 Properties
SASO ASTM Standard Specification for Glazed Brick (Single Fired, Brick Units)-Water
C1405/ASTM C67 Absorption
SASO ASTM Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension
C1526/ASTM C97 Stone
SASO ASTM Standard Test Method for Modulus of Rupture of Dimension Stone
C1526/ASTM C99
SASO ASTM Standard Test Method for Compressive Strength of Dimension Stone
C1526/ASTM C170
SASO ASTM Standard Test Method for Flexural Strength of Dimension Stone
C1526/ASTM C880
SASO ASTM Standard Test Method for Abrasion Resistance of Dimension Stone Subjected
C1526/ASTM C1353 to Foot Traffic Using a Rotary Platform Abraser
SASO ASTM Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension
C1527/ASTM C97 Stone
TL-564
SASO ASTM Standard Test Method for Modulus of Rupture of Dimension Stone
C1527/ASTM C99
SASO ASTM Standard Test Method for Compressive Strength of Dimension Stone
C1527/ASTM C170
SASO ASTM Standard Test Method for Flexural Strength of Dimension Stone
C1527/ASTM C880
SASO ASTM Standard Test Method for Abrasion Resistance of Dimension Stone Subjected
C1527/ASTM C1353 to Foot Traffic Using a Rotary Platform Abraser
SASO ASTM F1312/ASTM Standard Specification for Brick, Insulating, High Temperature, Fire Clay-
C93 Modulus of rupture
SASO ASTM F1312/ASTM Standard Specification for Brick, Insulating, High Temperature, Fire Clay-
C134 Dimension and Bulk density
SASO 1026 Methods of test for the natural marble tiles- Dimension, Water absorption, Bulk
density & Abrasion.
SASO 1030 (GSO 778) Methods of test for Ceramic Tiles
SASO 1812 GSO 1447 Pitched roof clay tiles and fittings- Appearance, Dimension & Transverse
strength
SASO-ISO-10545-1 Ceramic tiles — Part 1: Sampling and basis for acceptance
SASO-ISO--10545-2 Ceramic tiles — Part2: Determination of dimensions and surface quality
SASO-ISO-10545-3 Ceramic tiles — Part 3: Determination of water absorption, apparent porosity,

apparent relative density and bulk density
SASO-ISO-10545-4 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking

strength
SASO-ISO-10545-5 Ceramic tiles — Part 5: Determination of impact resistance by measurement of

coefficient of restitution
SASO-ISO-10545-6 Ceramic tiles — Part 6: Determination of resistance to deep abrasion for

unglazed tiles
SASO-ISO-10545-7 Ceramic tiles — Part 7: Determination of resistance to surface abrasion for
glazed tiles
SASO-ISO-10545-8 Ceramic tiles — Part 8: Determination of linear thermal expansion
SASO-ISO-10545-9 Ceramic tiles — Part 9: Determination of resistance to thermal shock
SASO-ISO-10545-10 Ceramic tiles — Part 10: Determination of moisture expansion
SASO-ISO-10545-11 Ceramic tiles — Part 11: Determination of crazing resistance for glazed tiles
SASO-ISO-10545-12 Ceramic tiles — Part 12: Determination of frost resistance
SASO-ISO-10545-13 Ceramic tiles — Part 13: Determination of chemical resistance
TL-564
SASO-ISO-10545-14 Ceramic tiles — Part 14: Determination of resistance to stains
SASO-ISO-10545-15 Ceramic tiles — Part 15: Determination of lead and cadmium given off by
glazed tiles
SASO-ISO-10545-16 Ceramic tiles — Part 16: Determination of small color differences
SASO-ISO-13007-2 – Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-Tensile
Clause 4.4.4.2 adhesion strength
Clause 4.4.4.3 Adhesion strength after immersion
Clause 4.4.4.4 adhesion strength after heat aging
Clause 4.4.4.5 adhesion strength after freeze-thaw cycle
SASO-ISO-13007-2 – Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-Open
Clause time tensile adhesion strength
SASO-ISO-13007-2 Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-Slip test
SASO-ISO-13007-2 – Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-
Clause 4.5.3.4 Transverse deformation
SASO-ISO-13007-2 Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-Shear
adhesion strength
SASO-ISO-13007-2 Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives- Shear
adhesion strength after heat aging
SASO-ISO-13007-2 Ceramic tile – Grout and adhesives- Part-2: Test method for adhesives-Open
time Tensile strength
adhesion strength after 21 days air cure, 7 days water immersion
adhesion at elevated temperature
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-Flexural
– Clause 4.1.3 strength under standard condition
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-
– Clause 4.1.4 Compressive strength under standard condition
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-Flexural
– Clause 4.1.5 strength after freeze-threw cycles
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-
– Clause 4.1.5 Compressive strength after freeze-threw condition
TL-564
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-Shrinkage
– Clause 4.3 testing
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-Water
– Clause absorption after 30 minutes
SASO GSO ISO 13007-4 Ceramic tiles- Grout and adhesive – Part 4: Test methods for grout-Water
absorption after 240 minutes
Insulating and Cladding Materials for Buildings
ASTM C136 Standard Test Method for Sieve Analysis of fine and coarse aggregates
ASTM C393 Standard test method for core shear properties of sandwich constructions by
beam flexure
ASTM C516/ASTM C136 Standard Test Method for Sieve Analysis of fine and coarse aggregates
ASTM C516/ASTM C518 Standard Test Method for Steady-State Thermal Transmission properties by
means of the Heat Flow Meter Apparatus flat Slab Specimens.
ASTM C518 Properties by means of the Heat Flow Meter Apparatus flat Slab Specimens.
ASTM C549 Standard Test Method for Steady-State Thermal Transmission
BS EN 822 Length and width
BS EN 13707/EN 1848-1 Determination of Length , width and Straightness
BS EN 13707/EN 1849-1 Determination of Mass per unit area
BS EN 13707/EN 1850-1 Determination of Visible defects
BS EN 13707/EN 12310-1 Determination of Tensile properties
BS EN 13707/EN 12311-1 Determination of Resistance to tearing (Nail Shank)
GSO EN 771-4/EN 772- Method of test Masonry unit-Part 1: Determination of compressive strength
1:2000
GSO EN 771-4/EN 772-13 Method of test Masonry unit-Part 13: Determination of Density
GSO EN 771-4/EN 772-16 Method of test Masonry unit-Part 16: Determination of dimensions
SASO ASTM C406 /ASTM Breaking strength

C120
SASO ASTM C406 /ASTM Water absorption

C121
SASO ASTM C406/ ASTM Test Method for Measuring Compressive Properties of Thermal Insulation
C165
SASO ASTM C406 /ASTM Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal
C203 Insulation
TL-564
SASO ASTM C406/ASTM Test Method for Dimensions and Density of Preformed Block and Board−Type
C303 Thermal Insulation
SASO ASTM C406/ASTM Test Method for Steady-State Thermal Transmission Properties by Means of
C518 the Heat Flow Meter Apparatus
SASO ASTM C518 Standard test method for steady-state thermal transmission properties by
means of the heat flow meter apparatus
SASO ASTM C578/ASTM Flexural Strength

C203
SASO ASTM C578/ASTM Water Absorption

C272
SASO ASTM C578/ASTM Thermal Resistance

C518
SASO ASTM C578/ASTM Compressive Resistance

D1621
SASO ASTM C578/ASTM Dimensions and Density

D1622
SASO ASTM C578/ASTM Dimensional Stability

D2126
SASO ASTM C578/ASTM Water Vapor Permeance

E96
SASO ASTM Water Absorption

C1126/ASTM C209
SASO ASTM Thermal Resistance

C1126/ASTM C518
SASO ASTM Compressive Resistance

C1126/ASTM D1621
SASO ASTM Dimensions and Density

C1126/ASTM D1622
SASO ASTM Dimensional Stability

C1126/ASTM D2126
SASO ASTM Water Vapor Permeance

C1126/ASTM E96
SASO GSO ASTM Dimension

C1492/ASTM C140
SASO GSO ASTM weight

C1492/ASTM C140
TL-564
SASO GSO EN 681-1/ISO Tensile Properties
37
SASO GSO EN 681-1/ISO Accelerated aging heat resistance

188
SASO GSO EN 681-1/ISO Compression set

815
SASO GSO EN 681-1/ISO Tear Strength

816
SASO EN 998-1/EN 1015- Determination of flexural and compressive strength of hardened mortar
11
SASO EN 998-1/EN 1015- Determination of adhesive strength of hardened rendering and plastering
12 mortars on substrates
SASO GSO BS 4841-1/BS Length and width

EN 822
SASO GSO BS 4841-1/BS Thickness

EN 823
SASO GSO BS 4841-1/BS Compression behavior

EN 826

EN 822

EN 823

EN 826

EN 822

EN 823

EN 826
SASO GSO BS 4841-3/BS Softening point – Ring and ball method

EN 1427

EN 823

EN 826
TL-564
SASO GSO BS 4841-4/BS Softening point – Ring and ball method
EN 1427
SASO GSO BS 4841-5/BS Thermal insulating products for building applications-Determination of length
EN 822 and width
SASO GSO BS 4841-5/BS Thermal insulating products for building applications-Determination of

EN 823 Thickness
SASO GSO BS 4841-5/BS Thermal insulating products for building applications-Determination of flatness
EN 825

EN 826 Compression behavior
SASO GSO BS 4841-6/BS Thermal insulating products for building applications-Determination of length
EN 822 and width

EN 823 Thickness
SASO GSO BS 4841-6/BS Thermal insulating products for building applications-Determination of flatness
EN 825

EN 826 Compression behavior
SASO EN 13162/EN 822 Dimensions and tolerances
SASO EN 13162/EN 823 Thickness
SASO EN 13162/EN 826 Compressive stress or compressive strength
SASO EN 13162/EN 1604 Dimensional stability under specified conditions
SASO GSO EN 13165/EN Dimensions and tolerances

822
SASO GSO EN 13165/EN Thickness

823
SASO GSO EN 13165/EN Compressive stress or compressive strength

826
SASO GSO EN 13165/EN Dimensional stability under specified conditions

1604
SASO GSO EN 13950/EN Flexural strength

520
SASO GSO EN 13950/EN Water vapour permeability

ISO 12572

13950
TL-564
SASO GSO EN 13950/EN Marking, labelling and packaging
13950
SASO GSO EN 13970/EN Determination of length, width

1848-1
SASO GSO EN 13970/EN Determination of thickness and mass per unit area
1849-1
SASO GSO EN 13970/EN Determination of visible defects

1850-1
SASO GSO EN 13970/EN Determination of resistance to tearing (nail shank)

12310-1
SASO GSO EN 13970/EN Determination of tensile properties

12311-1
SASO GSO EN 13984/EN Determination of length, width

1848-2
SASO GSO EN 13984/EN Determination of thickness and mass per unit area
1849-2
SASO GSO EN 13984/EN Determination of visible defects

1850-2
SASO GSO EN 13984/EN Determination of resistance to tearing (nail shank)

12310-1
SASO GSO EN 13984/EN Determination of tensile properties

12311-2
SASO GSO EN 14209/EN Flexural strength

520:2004

1420
SASO GSO EN 14209/EN Marking, labelling and packaging

14209
SASO GSO EN 14782/BS Tensile test

EN ISO 6892-1

14782
SASO GSO EN 14782/EN Water permeability

14782
SASO GSO EN 14783/BS Tensile test

EN ISO 6892-1
TL-564
14782
SASO GSO EN 14783/EN Water permeability

14782

1848-2
SASO GSO EN 14909/EN Thickness and mass per unit area

1849-2
SASO GSO EN 14909/EN Resistance to tearing (nail shank)

12310-1
SASO GSO EN 14909/EN Joint strength

12317-2
SASO GSO EN 14909/EN Resistance to static loading

12730
SASO GSO ISO 15184 Paints and varnishes - Determination of film hardness by pencil tests
SASO ISO 75-2 Plastic - determination of temperature of deflection under load - Part 2: Plastics
and ebonite
SASO ISO 2219/ISO 8301 Determination of steady-state thermal resistance and related properties — Heat
flow meter apparatus
SASO ISO 2219/ISO Determination of length and width

29465
SASO ISO 2219/ISO Determination of thickness

29466
SASO ISO 2219/ISO Density

29470
SASO-ISO-2812-1 Paints and varnishes - Determination of resistance to liquids – Part 1
SASO-ISO-2812-2 Paints and varnishes - Determination of resistance to liquids – Part 2: Water

immersion method
SASO ISO 2813 Paints and varnishes - Determination of specular gloss of nonmetallic paint films
at 20°, 60° and 85º
SASO GSO ISO 3397 Dimension
SASO GSO ISO 3397 Squareness of ends
SASO GSO ISO 3397 moisture
SASO ISO 4586-1 Resistance to immersion in boiling water
TL-564
SASO ISO 4586-1/ISO Flexural Strength & Modulus
178
SASO ISO 4586-1/ISO Tensile Strength

527-2
SASO ISO 4586-2 High-pressure decorative laminates (HPL, HPDL) -- Sheets
SASO ISO 4586-2 based on thermosetting resins (Usually called Laminates) –
SASO ISO 4586-2 Part 2: Determination of properties- Determination of length,
SASO ISO 4586-2 width, Thickness, Resistance to immersion in boiling water
SASO ISO 4586-2 Resistance to dry heat (180°C), Resistance to cigarette burns
ISO 4586-2 Resistance to dry heat (180°C) Resistance to cigarette burns
SASO ISO 4586-3/ISO Dimensional tolerance, Resistance to immersion in boiling water Resistance to
4586-2 dry heat (160°C,180°C),
SASO ISO 4586-4/ISO Flexural properties

178
SASO ISO 4586-4/ISO Tensile properties

527-2
SASO ISO 4586-4/ISO Density

1183
SASO ISO 4586-4/ISO Dimensional tolerance, Dimensional Stability

4586-2

1183-1
SASO ISO 4586-5/ISO Dimensional stability, Dimensional tolerances

4586-2
SASO ISO 4586-6/ISO Flexural properties

178
SASO ISO 4586-6/ISO Tensile properties

527-2

1183
SASO ISO 4586-6/ISO Dimensional Tolerance, Dimensional stability

4586-2
SASO ISO 4586-7/ISO Flexural strength & Modulus

178
TL-564
1183
SASO ISO 4586-7/ISO Dimensional stability, Dimensional tolerances, Resistance to boiling water,
4586-2
SASO ISO 4586-8/ISO Dimensional stability, Dimensional tolerances, Resistance to boiling water,
4586-2
SASO ISO 4586-8/ISO Resistance to immersion in boiling water

4586-2
SASO ISO 4586-8/ISO Resistance to dry heat (180°C)

4586-2
SASO ISO 4586-8/ISO Resistance to cigarette burns

4586-2
SASO ISO 4586-8/ISO Resistance to immersion in boiling water

4586-2
SASO GSO ISO 5321 Dimension
SASO GSO ISO 5321 Squareness of ends
SASO GSO ISO 5321 moisture
SASO ISO 6272-2 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2:
Falling-weight test, small-area indenter
SASO GSO ISO 8145/ISO Dimensions

8145
SASO GSO ISO 8145/ISO Interlaminar strength

8145
SASO GSO ISO 8145/ISO Breaking Load

8145
SASO GSO ISO 8145/ISO Thermal Conductivity

8201
SASO GSO ISO 8335 Geometrical properties
SASO GSO ISO 8335 Bending Strength
SASO GSO ISO 8335 Density
SASO GSO ISO 8335 Moisture content
SASO ISO 8510-2 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly –
Part 2: 180 degree peel
SASO ISO 8873-1/ISO Compressive strength

844
TL-564
845
SASO ISO 8873-1/ISO Dimensional stability

2796
ISO 9125 Dimensions and tolerances
ISO 9125 Apparent density
ISO 9125 determination of the bending moment
(SASO GSO ISO 10904) Dimensions and tolerances on nominal dimensions
(SASO GSO ISO 10904) Breaking load
(SASO GSO ISO 10904) Apparent density
SASO ISO 11998 Paints and Varnishes - determination of wet scrub resistance & clean ability of
coatings
SASO ISO 13894-2/ISO Dimensional tolerances

13894-1
SASO ISO 13894-2ISO Surface bond strength

13894-1
SASO ISO 13894-2/ISO Perpendicular tensile strength

13894-1
SASO GSO EN 12326- Thickness

1/EN 12326-2
SASO GSO EN 12326- Modulus of Rupture

1/EN 12326-2
SASO GSO EN 13707/EN Dimensional tolerances and mass per unit area
1848-1
SASO GSO EN 13707/EN Tensile properties

12311-1
SASO GSO EN 13707/EN Flexibility at low temperature

1109
SASO GSO ISO 27769- Dimensions

2/ISO 9426
SASO GSO ISO 27769- Density

2/ISO 9427
SASO GSO ISO 27769- Moisture content

2/ISO 16979
TL-564
SASO GSO ISO 27769- Bending strength
2/ISO 16978
SASO GSO ISO 27769- Modulus of elasticity

2/ISO 16978
SASO GSO ISO 27769- Thickness swelling

2/ISO 16983
Metal Sections and their Alloys for Construction and Building Purposes
A899 Continuity of coating
ASTM B117 Standard practice for operating salt spray (fog) apparatus
ASTM G154 Standard practice for operating fluorescent ultraviolet (UV) lamp apparatus for
exposure of nonmetallic materials
SASO 79/SASO 80 Tensile strength, Yield strength & Elongation
SASO ASTM A6/ASTM Standard Test Methods and Definitions for Mechanical Testing of Steel
A370-19e Products (Tensile properties, Bend Test & Dimension)
SASO ASTM A6/ASTM Standard Test Methods, Practices, and Terminology for Chemical Analysis of
A751-14a Steel Products- XRF Method
SASO ASTM A53/ASTM Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles
A90-13 with Zinc or Zinc-Alloy Coatings
A370-19e Products(Tensile properties, Bend Test & Dimension)
A751-14a Steel Products – XRF Method
TL-564
SASO ASTM A615/ASTM Standard Test Methods for Bend Testing of Material for Ductility
E290-14
A751-14a Steel Products-XRF Method
SASO ASTM A706/ASTM Standard Test Methods for Bend Testing of Material for Ductility
E290-14
SASO-ASTM Standard Test Methods for Holiday Detection in Pipeline Coatings

A775/A775M/ASTM G62-
14
A751-14a Steel Products – XRF Method
A370-19e Products. (Tensile properties, Bend Test & Dimension)
SASO/ASTM G12 Thickness of coating
SASO ISO 6362-2/ISO Metallic materials — Tensile testing — Part 1: Method of test at room
6892-1 temperature
SASO ISO 6362-3 Wrought aluminum and aluminum alloys - Extruded rods/bars, tubes and
profiles - Part 3: Extruded rectangular bars - Tolerances on shape and
dimensions
TL-564
profiles - Part 4: Profiles - Tolerances on shape and dimensions
profiles - Part 5: Round, square and hexagonal bars – Tolerances on shape and
dimensions
profiles - Part 6: Round, square, rectangular and hexagonal tubes - Tolerances
on shape and dimensions
profiles - Part 7: Chemical composition-XRF Method
EN 10138-1 Tensile Properties
EN 10343 /ISO 15630-3 Tensile Test, Bend Test, Re-Bend test & Mass per Unit Area
SASO ISO 10544/ISO Tensile test

6892
SASO ISO 10544/ISO Bend and Re-Bend test

10065
SASO ISO 10544/ISO Dimension and marking

10544
SASO ISO 10799-1 Cold-formed welded structural hollow sections of non-alloy and fine grain steels
- Part 1: Technical delivery conditions
SASO ISO 10799-2 Cold-formed welded structural hollow sections of non-alloy and fine grain steels
- Part 2: Dimensions and sectional properties
6892-1 temperature
SASO ISO 12633-2 Hot-finished structural hollow sections of non-alloy and fine grain steels -- Part
2: Dimensions and sectional properties
SASO ISO 14654/ISO Paints and varnishes — Determination of film thickness

2808
6892-1 temperature
6892-1 temperature
6892-1 temperature
Hydraulic Connections and Related Material
ASTM C109/C109M Compressive Strength of Hydraulic Cement Mortar
TL-564
ASTM C185 Air Content of Air- Entraining Additions for Use in the Manufacture of Air-
Entraining Hydraulic Cement
ASTM C293 Flexural strength of Hydraulic Cement Mortar
SASO 144 Dimensions of Solid concrete Blocks
SASO 144 external Appearance of Solid concrete Blocks
SASO 144 compressive Strength of Solid concrete Blocks
SASO-144 water Absorption of Solid concrete Blocks
SASO ASTM C226/ASTM Compressive Strength of Mortar of Air- Entraining Additions for Use in the
C109/C109M Manufacture of Air-Entraining Hydraulic Cement
SASO ASTM C226/ASTM Autoclave Expansion of Air- Entraining Additions for Use in the Manufacture of
C151 Air-Entraining Hydraulic Cement
SASO ASTM C226/ASTM Air Content of Mortar of Air- Entraining Additions for Use in the Manufacture of
SASO ASTM C226/ASTM Normal Consistency of Air- Entraining Additions for Use in the Manufacture of
SASO ASTM C226/ASTM Time of Setting of Air- Entraining Additions for Use in the Manufacture of Air-
C191 Entraining Hydraulic Cement
SASO ASTM C226/ASTM Fineness of Cement of Air- Entraining Additions for Use in the Manufacture of
SASO ASTM C226/ASTM flexural strength of Air- Entraining Additions for Use in the Manufacture of Air-
C293 Entraining Hydraulic Cement
SASO ASTM C465/ASTM Standard Specification for Processing Additions for Use in the Manufacture of
C151 Hydraulic Cements-Autoclave Expansion
C187 Hydraulic Cements-Normal Consistency
C191 Hydraulic Cements-Time of Setting
C204 Hydraulic Cements-Fineness of Cement
SASO ASTM C688ASTM Flexural Strength of Functional Additions for Use in Hydraulic Cements
C78
SASO ASTM C688/ASTM Compressive Strength of Functional Additions for Use in Hydraulic Cements
C109
SASO ASTM C688/ASTM Autoclave Expansion of Functional Additions for Use in Hydraulic Cements
C151
TL-564
SASO ASTM C688/ASTM Volume Change of Functional Additions for Use in Hydraulic Cements
C157
SASO ASTM C688/ ASTM Normal Consistency of Functional Additions for Use in Hydraulic Cements
C187
SASO ASTM C688/ASTM Time of Setting of Functional Additions for Use in Hydraulic Cements
C266
SASO ASTM C688/ASTM Water Content of Functional Additions for Use in Hydraulic Cements
C688
SASO ASTM Fineness of slag cement for use in concrete and mortars
C989M/ASTM C204
SASO ASTM Slag Activity Index of slag cement for use in concrete and mortars
C989M/ASTM C989
SASO ASTM Accelerated pozzolanic strength activity index of Silica Fume Used in
C1240/ASTM C311 Cementitious Mixtures
SASO ASTM Percent retained on 45-μm of Silica Fume Used in Cementitious Mixtures
C1240/ASTM C430
SASO ASTM Compressive Strength of Mortar Cement

C1329M/ASTM C109
SASO ASTM Autoclave Expansion of Mortar Cement

C1329M/ASTM C151
SASO ASTM Air Entrainment of Mortar Cement

C1329M/ASTM C185
SASO ASTM Normal Consistency of Mortar Cement

C1329M/ASTM C187
SASO ASTM Time of Setting of Mortar Cement

C1329M/ASTM C266
SASO ASTM Fineness of Mortar Cement

C1329M/ASTM C430
SASO ASTM Flexural Bond Strength of Mortar Cement

C1329M/ASTM C1357
SASO-GSO-1914 Air content in mortar of Portland cement
SASO-GSO-1914 Fineness, specific surface, m2/kg of Portland cement
SASO-GSO-1914 Autoclave expansion of Portland cement
SASO-GSO-1914 Setting time, Vicat test of Portland cement
SASO-GSO-1914 Compressive strength of Portland cement
TL-564
SASO-GSO-1914 Heat of hydration of Portland cement
SASO ISO 8336 Dimensions and tolerances of Fibre-cement flat sheets
SASO ISO 8336 Modulus of rupture of Fibre-cement flat sheets
SASO ISO 8336 Water Permeability of Fibre-cement flat sheets
SASO ISO 8336 Moisture movement of Fibre-cement flat sheets
SASO ISO 8336 Water vapour transmission of Fibre-cement flat sheets
SASO-ISO 9125 Dimensions and tolerances of Fibre-cement slates and fittings
SASO ISO 10904 Dimensions and tolerances on nominal dimensions of Fibre-cement corrugated
sheets and fittings for roofing and cladding
SASO GSO EN 13748- Dimensions and tolerances of Terrazzo tiles for internal use
1/EN-13748-1
SASO GSO EN 13748- Mechanical strength of Terrazzo tiles for internal use
1/EN-13748-1
SASO GSO EN 13748- Slip resistance of Terrazzo tiles for internal use
1/EN-13748-1
SASO GSO EN 13748- Water absorption of Terrazzo tiles for internal use
1/EN-13748-1
GSO- Gulf Standard Organization; MPI- Master Paint Institute; IQS- Standards of Iraq
SASO- Saudi Arabian Standards Organization; SSA- Standards Saudi Arabia
UEATC- Technical Guide for the Assessment of Roof Waterproofing System
TL-564

Wimpey Laboratories DUBAI Accreditation

Uploaded by

Copyright:

Available Formats

Wimpey Laboratories DUBAI Accreditation

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wimpey Laboratories DUBAI Accreditation

Uploaded by

Copyright:

Available Formats

This is to attest that

WIMPEY LABORATORIES - LLC

Testing Laboratory TL-564

Effective Date May 20, 2021

Thermoplastics and Sealants

ASTM C920-14a Standard specification for elastomeric joint sealants section 9

ASTM D523-14 Standard Test Method for Specular Gloss

Fiber Optic Cable

IEC 60794-1-21 Tensile Performance Test

IEC 60794-1-21 Crush Test (Compression)

IEC 60794-1-21 Impact Resistance Test

IEC 60794-1-21 Torsion Test, Bend Test

IEC 60794-1-21 Bending Under Tension

IEC 60794-1-21 Temperature Cycling Test

IEC 60794-1-21 Water Penetration Test

ISO 13385-1 Outer Cable Dimension

Pigtail & Patch Cord

IEC 61300-2-2 Mating Durability

IEC 61300-2-22 Change of Temperature

IEC 61300-2-6 Tensile Strength of coupling Mechanism Pulling Force Straight

IEC 61300-3-4 Attenuation

IEC 61300-3-6 Return Loss

Adaptor & Connectors

IEC 61300-2-2 Mating Durability

IEC 61300-2-22 Change of Temperature

IEC 61300-2-4 Fiber/Cable Retention

IEC 61300-2-6 Tensile Strength of coupling Mechanism Pulling Force Straight

IEC 61300-3-4 Attenuation

IEC 61300-3-6 Return Loss

BS EN 232 Baths: Determination of Connecting dimensions

EN 251 Shower trays: determination of connecting dimensions

BS EN 14516 Clause 9 Baths for domestic purposes. Marking

EN 14688 Clause 5.6 Sanitary appliances. Wash basins: Resistance to scratching

IQS 1612 Sanitary Appliances – Wash Basins

IQS 1911 Sanitary Appliances – Bidet and Closets

SASO 1024 Clause 3 Ceramic Sanitary appliances: Water absorption

SASO 1024 Clause 4 Ceramic Sanitary appliances: Crazing chemical resistance

SASO 1024 Clause 5 Ceramic Sanitary appliances: Chemical resistance test

SASO 1024 Clause 7 Ceramic Sanitary appliances: Abrasion resistance

SASO 1024 Clause 8 Ceramic Sanitary appliances: Warpage test

SASO 1257 Sanitary appliances - flushing water tanks

SASO 1376 Methods of testing paper towels and toilet paper

SASO 1476 Ceramic sanitary appliances - wash basins

SASO 1913- Clause 6 Sanitary appliances. Tapware: Determination of Marking

SASO 1914 Clause 3 Sanitary appliances. Tapware: Hydraulic characteristics test

SASO 2896 Clause 10 Floor and Trench Drains: Loading test

SASO 2896 Clause 11 Floor and Trench Drains: Weathering test

SASO 2896 Clause 12 Floor and Trench Drains: Determination of Markings

UAE.S GSO 143 Methods of testing facial tissue-paper

ASTM D36 Determination of softening point of Bituminous Sheet Material

ASTM D5147 section 6 Determination of Thickness of Bituminous Sheet Material

ASTM D5147 section 13 Determination of heat conditioning of Bituminous Sheet Material

GSO 1943/GSO 1153 Determination of pH in cosmetics

GSO 1943/GSO 2019 Determination of Peroxide value in cosmetics

GSO 1943/USFDA BAM Determination of Total Bacterial count in cosmetics

GSO 1943/USFDA BAM Determination of Yeast & Mould in cosmetics

GSO 1943/USFDA BAM Determination of Staphylococcus aureus in cosmetics

GSO 1943/USFDA BAM Determination of Pseudomonas aeruginosa in cosmetics

GSO 1943/USFDA BAM Determination of E.coli in cosmetics

GSO 1943/WL-IP-201 Determination of crystalline silica in cosmetics