Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Electro-Pneumatic Intersystem TRANSMITER Type A201: Technical Details

    Uploaded by

    ANGEL FLORES
    This document provides information on the Electro-pneumatic Intersystem Transmitter type A201. It is used to convert standard analog electric signals to standard pneumatic signals in the ranges of 20-100 kPa or 60-300 kPa for use in automatic control and industrial systems. The transmitter functions by comparing the force generated by a coil in a magnetic field, proportional to the input signal, with the force of a pressure capsule providing feedback and outputting the pneumatic signal. Technical details, ordering information, working conditions and dimension drawings are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Electro-Pneumatic Intersystem TRANSMITER Type A201: Technical Details

    Uploaded by

    ANGEL FLORES
    18 views2 pages
    This document provides information on the Electro-pneumatic Intersystem Transmitter type A201. It is used to convert standard analog electric signals to standard pneumatic signals in the ranges of 20-100 kPa or 60-300 kPa for use in automatic control and industrial systems. The transmitter functions by comparing the force generated by a coil in a magnetic field, proportional to the input signal, with the force of a pressure capsule providing feedback and outputting the pneumatic signal. Technical details, ordering information, working conditions and dimension drawings are also included.

    Original Title

    A201

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the Electro-pneumatic Intersystem Transmitter type A201. It is used to convert standard analog electric signals to standard pneumatic signals in the ranges of 20-100 kPa or 60-300 kPa for use in automatic control and industrial systems. The transmitter functions by comparing the force generated by a coil in a magnetic field, proportional to the input signal, with the force of a pressure capsule providing feedback and outputting the pneumatic signal. Technical details, ordering information, working conditions and dimension drawings are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views2 pages

    Electro-Pneumatic Intersystem TRANSMITER Type A201: Technical Details

    Uploaded by

    ANGEL FLORES
    This document provides information on the Electro-pneumatic Intersystem Transmitter type A201. It is used to convert standard analog electric signals to standard pneumatic signals in the ranges of 20-100 kPa or 60-300 kPa for use in automatic control and industrial systems. The transmitter functions by comparing the force generated by a coil in a magnetic field, proportional to the input signal, with the force of a pressure capsule providing feedback and outputting the pneumatic signal. Technical details, ordering information, working conditions and dimension drawings are also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ELECTRO-PNEUMATIC INTERSYSTEM

    TRANSMITER type A201

    ELECTRO-PNEUMATIC INTERSYSTEM TRANSMITTER type A201 IS


    USED FOR CONVERSION THE STANDARD ANALOGUE ELECTRIC
    SIGNAL ON STANDARD PNEUMATIC SIGANL AT RANGE 20...kPa OR
    60..300kPa IN AUTOMATIC REGULATION SYSTEMS OR CONTROL
    INDUSTRY SYSTEMS.
    THIS TRANSMITTER POSSESES COOPERATION THE ELECTRONIC
    AUTOMATION SYSTEMS WITH EXECUTIVE ELEMENTS.
    THE TRANSMITTER’S WORKING IS BASED ON COMPARISON
    MOMENT RULE OF FORCE MADE BY COIL WHICH WAS PUT IN
    CONSTANT MAGNETIC FIELD PROPORTIONAL FOR INPUT SIGNAL,
    WITH MOMENT OF FORCE MADE BY METALIC PRESSURE * pressure voltage 140±14 kPa
    CAPSULE OF FEEDBACK, WHERE THE PNEUMATIC OUTPUT * protection degree IP 54
    SIGNAL IS SUPPLIED. * spark-safety version acc. to ATEX directive
    CHANGE OF DIRECT OF TRANSMITTER WORKING (”DIRECTLY” OR
    “INVERSELY” WORKING) MIGHT BE REALIZED BY CHANGE
    CURRENT FLOW DIRECTION BY COIL AND CORRECTION OF
    TRANSMITTER REGULATION.

    TECHNICAL DETAILS
    - input standard signal 4...20 mA; 0...20 mA
    - input inversion signal 20...4 mA; 20...0 mA
    - output signal 20...100 kPa; 60...300 kPa
    - pressure supply 140 ±14 kPa; 400 ±40 kPa
    - input resistance ≤250W
    - basis mistake 0,6%
    - hysteresis 0,25%
    - additional mistakes:
    from changes of pressure supply by 10% max 0,5%
    from change of ambient temperature max 0,8% on each 10OC
    form vibrations in range:
    10 ... 60 Hz, amplitude<0,35 mm
    60 ... 500 Hz, acceleration 5g max 1%
    form reaction the magnetic constant and commutative field
    at intensity 100 A/m, 50 Hz (acc. to PN-EN 6100-4-8:1998) max 0,5 permissible basis mistake
    form disturbances radiated magnetic field
    at radio frequency 10 V/m., at frequency in range
    80 MHz do 1 GHz (acc. to PN-EN 6100-4-3:2002) max 0,5 permissible basis mistake
    from series of quick transient states made by voltage
    at peak value 2 KV (acc. To PN-EN 6100-4-4:2002) max 0,5 permissible basis mistake
    from surge at voltage 0,5 KV (acc. to PN-EN 6100-4-5:1998) max 0,5 permissible basis mistake
    - working position optionally, subject to 0 correction in choosed position
    - own air consumption max 0,35 kg/h at pz= 140 kPa
    - max rate 7,5 kg/h at pz= 140 kPa
    - spark-safety characteristic II 2 G EExia IICT6/T5/T4
    - certificate KDB 04 ATEX 026X
    - conditions of using in explosion-risk zone:
    1. Electro-pneumatic system transmitter type A201-A2XX-XX-XX, ... may cooperate only with spark-safety circuit at parameters:
    U1 = 28 V DC, I1 = 100 mA, P1 = 0,7 W
    2. Transmitter connection with cooperating devices should be made by separate conductors pair or by cable, which OLNY spark-
    safety circuits will be connected. L and C parameters of external circuit should be the same like for device cooperates with transmitter.
    3. Acceptable ambient temperature - depending on temperature class
    Temperature class of gases and steam T6 T5 T4
    Acceptable ambient temperature(Ta) -400C ... +500C -400C ... +650C -400C ... +700C
    - housing protection degree IP54 acc. to PN-EN 60529:2002
    - mass 1,1 kg
    - connectors:
    Electric screw clamps for transmitter at diameter to 2,5 mm2
    Pneumatic threaded holes St. B1/8” or connectors

    CONTROLMATICA ZAP-PNEFAL Sp. z o.o. Page 1 of 2


    ul. Krotoszynska 35; PL-63-400 Ostrow Wlkp., Poland
    tel.: +48627372250, fax: +48627372724, e-mail: controlmatica@controlmatica.com.pl
    www.controlmatica.com.pl
    Electro-pneumatic intersystem transmitter type A201

    WORKING CONDITIONS
    Electro-pneumatic system transmitter type A201 is designed for working
    in industry condition in little roof places, booths in the field, not heated and
    closed rooms or in control room base in conditions: DIMENSION DRAWINGS
    - ambient temperature -40 0C ... +70 0C 57 .s
    otwle 70
    - relative humidity 100% 22 oh
    9,5 6,5 8-
    - sinusoidal vibrations 10 ... 60 Hz, amplitude< 0,35 mm,

    8
    60 ... 500 Hz, acceleration 5g
    (class VH6 acc. to PN-EN 60654:1996)
    - working position optionally, subject to 0 correction 14

    in chosed position
    - working medium air without dust, oil and aggressive pollution,

    125
    146
    at relative humidity when dew temperature
    should be lesser than ambient temperature
    at the value not lesser than 10OC (10OK)
    (PN-EN 60654-2:1999)

    21 6,5
    35 28.5
    55 30 33
    104 84

    ORDERING METHOD
    A201- Electro-pneumatic intersystem transmitter

    CODE1 VERSION
    1 standard
    2 spark-safety with certificate ATEX II 2 G EExia IICT6/T5/T4

    CODE 2 INPUT SIGNAL


    0 4 ... 20 mA
    1 0 ... 20 mA
    5 20 ...4 mA (inversion signal)
    6 20 ... 0 mA (inversion signal)

    CODE 3 PNEUMATIC CONECTORS


    1 connectors for copper or polyethylene pipes f
    6x1 mm
    OPTIONS:
    CODE 4 INPUT OF ELECTRIC CABLE
    -D1 standard cable key type M20x1,5 (metallic type covered zinc
    coating - for standard and spark-safety version
    -D2 polyamide cable key type M20x1,5 (for standard version)
    -D3 polyamide cable key type M20x1,5 (for spark-safety version)

    CODE 5 OUTPUT SIGNAL


    -W1 range from 20...100 kPa
    -W2* range from 60...300 kPa
    * it doesn’t available in spark-safety Ex version

    A201-A 1 0 1 - D1 EXAMPLE OF TRANSMITTER DENOTATION

    REMARK: other versions of transmitter type A201 available aftr agreement with manufacturer

    Example of ordering:
    Electro-pneumatic intersystem transmitter type A201 in standard version with input signal 4...20 mA,
    with connector for pipe f
    6x1 mm with standard - metallic cable key and output signal from 20 ... 100 kP has denotation:
    Electro-pneumatic system transmitter type A201-101 -D1-W1

    The right of introducing design changes in the product, without deteriorating of its operation parameters, is reserved.

    CONTROLMATICA ZAP-PNEFAL Sp. z o.o. Page 2 of 2


    ul. Krotoszynska 35; PL-63-400 Ostrow Wlkp., Poland January 2012
    tel.: +48627372250, fax: +48627372724, e-mail: controlmatica@controlmatica.com.pl
    www.controlmatica.com.pl

    You might also like