This document provides a summary of the design checks performed for a pinned base plate connection supporting a dryer structure. The connection was designed according to IS 800:2007. Design checks showed the base plate satisfied requirements for bearing capacity at the interface with the column and concrete base. Checks of fasteners anchoring the base plate showed capacities exceeding demands for failure modes including steel failure in tension and shear, pull-out, pry-out, and concrete edge failure for both single and grouped fasteners. The analysis identified high bending moments in the axis perpendicular to the design axis.
This document provides a summary of the design checks performed for a pinned base plate connection supporting a dryer structure. The connection was designed according to IS 800:2007. Design checks showed the base plate satisfied requirements for bearing capacity at the interface with the column and concrete base. Checks of fasteners anchoring the base plate showed capacities exceeding demands for failure modes including steel failure in tension and shear, pull-out, pry-out, and concrete edge failure for both single and grouped fasteners. The analysis identified high bending moments in the axis perpendicular to the design axis.
This document provides a summary of the design checks performed for a pinned base plate connection supporting a dryer structure. The connection was designed according to IS 800:2007. Design checks showed the base plate satisfied requirements for bearing capacity at the interface with the column and concrete base. Checks of fasteners anchoring the base plate showed capacities exceeding demands for failure modes including steel failure in tension and shear, pull-out, pry-out, and concrete edge failure for both single and grouped fasteners. The analysis identified high bending moments in the axis perpendicular to the design axis.
This document provides a summary of the design checks performed for a pinned base plate connection supporting a dryer structure. The connection was designed according to IS 800:2007. Design checks showed the base plate satisfied requirements for bearing capacity at the interface with the column and concrete base. Checks of fasteners anchoring the base plate showed capacities exceeding demands for failure modes including steel failure in tension and shear, pull-out, pry-out, and concrete edge failure for both single and grouped fasteners. The analysis identified high bending moments in the axis perpendicular to the design axis.
Base plate (IS 800 : 2007) Dimensions Dimensions Unit Value Min. value Max. value Sta. References ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Base plate Longitudinal dimension [mm] 800.00 470.00 -- Transversal dimension [mm] 700.00 170.00 -- Distance from fasteners to edge [mm] 80.00 63.00 -- Cl. 10.2.4.2 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.21 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DESIGN CHECK Verification Unit Capacity Demand Ctrl EQ Ratio References ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Concrete base Concrete base bearing [KN/mm2] 0.02 0.00 DL 0.02 IS 456 Cl. 34.4; Base plate Yielding at bearing interface [KN*m/m] 96.00 20.55 DL 0.21 Cl. 7.4.3.1 Yielding at tension interface [KN*m/m] 96.00 0.00 DL 0.00 Cl. 7.4.3.1 Column Weld resistance [KN/m] 1325.60 0.00 DL 0.00 Cl. 10.5.7.1.1 WARNINGS - High value moments detected in the axis perpendicular to the design axis. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis Fasteners Dimensions Dimensions Unit Value Min. value Max. value Sta. References ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Fasteners Spacing [mm] 320.00 168.00 -- [EC2-4] Sec. 7.2.2.5 Concrete cover [mm] 50.00 35.00 -- [EC2-1] Table 4.4N Effective length [mm] 350.00 -- 472.70
REFERENCES [EC2-4] EN 1992-4 (2013) Eurocode 2: Design of concrete structures - Part 4: Design of fastenings for use in concrete. [EC2-1] EN 1992-1-1 (2004) Eurocode 2. Design of concrete structures - Part 1-1: General rules and rules for buildings [3] International Federation for Structural Concrete (2011). Design of Anchorages in Concrete. CEP-FIP. Lousanne, Switzerland.
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings
