LED lighting for hazardous areas

Champ MLLA
LED lighting for hazardous areas

Safe. Reliable. Efficient.

2 models – 3,700 & 7,900 lumens
 Champ® MLLA linear LEDs

Safe.
Reliable.
Efficient.
Featuring a broad range of LED luminaires for
harsh and hazardous environments, Eaton's
Crouse-Hinds delivers lighting solutions that
perform reliably in even the worst operating
conditions. This reduces your energy,
maintenance and manpower costs.

Why LED? Why Crouse-Hinds?

Useful life Industry-best reliability

Rated life is up to 60,000 Built to withstand extreme
hours of maintenance-free temperatures, vibration,
and safe operation water and dust
Energy efficiency Thermal management
LED average energy Effective heat sinking
consumption is 65% less ensures longer life
than T12, T8 and T5HO
fluorescent fixtures Quality of light
Custom optics designed to
Start/restart time maximize light distribution
Instant illumination vs. 10 and intensity
minute restrike time for
fluorescent Retrofit compatibility
LED fixtures are compatible
Light quality with Pauluhn™ DuraPro,
Higher color rendering and MagnaPro, Rig-A-Lite™ and
color temperature compared Snelson© fluorescent fixtures
to fluorescent
Servicable drivers
Environmental benefits Easy access to drivers for
Mercury-free LED eliminates service or replacement
disposal costs and lower
energy consumption for a
smaller carbon footprint

2 EATON'S CROUSE-HINDS
Design features
Designed for harsh and hazardous. Champ MLLA linear LED luminaires are engineered to handle demanding
conditions. The MLLA stands up to high vibration, hose down, shock and impact, while delivering long life and high
lumen performance for up to 20 years.

Custom optics: Comprehensive certification: Quick & easy installation:

• Standard wide (120°) beam spread for control • Single model certified for • Easy access to drivers and wiring
room and indoor application maximizes use in Class I, Division 2 and • No custom brackets or hardware needed
illumination on wall panels Class II, Division 1 harsh and
hazardous applications • Seven mounting options available
• Narrow (80°) beam spread option for
targeted illumination; avoids spillage and light
loss

Built to last:
• Ingress protection from hose down
Slim profile:
water or diesel fuel in harsh operational
• 2.7" fixture height (excluding mounting brackets)
conditions – passed 2,000 psi high
• Perfect for mounting in confined or low height areas pressure test
• Vibration-, impact- and shock-resistant –
passed 5G, 3-axis vibration test
• 60,000 hour lifetime @ 55°C ambient

Best-in-class efficacy:
• Up to 132 lumens per watt

Why choose Champ MLLA LEDs?

Reliable lighting. MLLA LED luminaires are engineered to deliver high lumen output and
maintenance-free long life in the toughest conditions.

MLLA4 vs. 2-lamp T5HO

59% 64% 100%

ENERGY TOTAL COST MAINTENANCE
EFFICIENCY OF OWNERSHIP REDUCTION

Assumptions: Calculations based on overall life of the LED system. Energy cost of $.09 per kilowatt; 24 hour per day operation; labor rate of $75 each for 2 workers; average time for fixture maintenance of 1 hour.

EATON'S CROUSE-HINDS 3
Champ® MLLA linear LED luminaires
The Champ MLLA Linear LED by Eaton’s Crouse-Hinds is specifically
designed to replace fluorescent T12, T8 and T5HO lighting in harsh
and hazardous applications. The rugged and durable design features
the industry’s most versatile and flexible mounting options. The
Champ MLLA is the ideal solution for high vibration, impact and hose
down applications.

Applications:
Oil and gas refineries, petrochemical facilities, food and beverage
facilities, platforms, loading docks, tunnels, outdoor wall and
stanchion mounted general area lighting, and where flammable
vapors, gases, ignitable dusts, fibers or flyings are present.

Key features & benefits:

• Industry-leading efficacy: up to 132 LPW
• -40°C to +65°C ambient operating temperature (standard model)
• Low profile (<3" height)
• Versatile ceiling/swivel, wall, flush, pole and pendant mounting
options
• Wide and narrow optics for uniform illumination
• Four points of secondary retention
• 2,000 psi high pressure hose rated
• High vibration resistance
• Surge protection: 4kV line to line, 6kV line to earth
• Emergency battery back-up (90 minutes) and surge
protection options (up to 10kV)‡ on DLL models
• DesignLights Consortium® Qualified (some models
are not DLC qualified or pending)*
• 5 year fixture warranty†
‡ One year warranty for "EM" models
* Refer to www.designlights.org Qualified Products List under Family Models for
full listing details. Not all models are approved for all application categories.
† Refer to page the authorized distributor price book for Crouse-Hinds standard
Terms and Conditions.

Energy consumption comparison

2 foot MLLA linear LED vs. fluorescent 4 foot MLLA linear LED vs. fluorescent

90 160
80 140
70 120
60 100
50
80
40
60
30
20 40
10 20
0 0
T12HO T8HO T5HO T12 T8 T5 MLLA2 T12HO T8HO T5HO T12 T8 T5 MLLA4
Energy consumption (watts) Energy consumption (watts)

Typical Typical
Equivalent energy Equivalent energy
Typical Lumens HID savings / Typical Lumens HID savings /
Model lumens Wattage per watt luminaire lifetime Model lumens Wattage per watt luminaire lifetime

T12HO Up to 67% T12HO Up to 64%

T8HO Up to 63% T8HO Up to 60%
T5HO Up to 52% T5HO Up to 50%
MLLA 3,700 28.4 130 MLLA4 7,900 59.8 132
T12 Up to 42% T12 Up to 46%
T8 Up to 32% T8 Up to 32%
T5 Up to 17% T5 Up to 22%
All luminaires in the comparison are 2 lamp, 2 foot All luminaires in the comparison are 2 lamp, 4 foot

4 EATON'S CROUSE-HINDS
Specifications
Certifications:
NEC standards:
• Class I, Division 2, Groups A, B, C, D

• Class II, Division 1, Groups F, G

• Class I, Zone 2
• Class III
• NEMA 4X; IP66
• Marine and Wet Locations
Electrical ratings:
UL standards:
• UL844 Electrical Fixture Hangers for Hazardous Locations MLLA2 MLLA4

• UL1598 Luminaire Lumen output 3,700 7,900

Frequency 50/60 Hz 50/60 Hz
• UL1598A Luminaire for Installation on Marine Vessels
Voltage 120-277 VAC/1127-300 VDC; 347-480 VAC
• UL924 for Emergency Lighting

CSA standard:
• C22.2 No. 137 Current Wattage Power
Model Voltage (A) (W) factor THD

Additional certifications: MLLA2-UNV1 120 0.23 28.3 0.99 <15%

• ABS design assessed MLLA2-UNV1 277 0.11 28.4 0.92 <15%
MLL2/UNV34 347 0.09 29.2 0.90 <15%
Materials: MLL2/UNV34 480 0.07 30.1 0.90 <15%
Housing:
• Copper-free aluminum
MLLA4-UNV1 120 0.51 62.0 0.99 <15%

• Optional Corro-free™ epoxy powder coat MLLA4-UNV1 277 0.23 59.8 0.94 <15%
MLL4/UNV34 347 0.16 55.8 0.95 <15%
Lens:
• Glass or polycarbonate MLL4/UNV34 480 0.12 56.2 0.95 <15%

• Diffused glass or polycarbonate

Temperature codes:
Mounting:
Simultaneous
Versatile mounting options: rating

• Flush back mount Ambient Min. temp. Class I, Class II, Class I, Div. 2,
temperature wire supply Div. 2 Div. I Class II, Div. 1
• Swivel/ceiling back mount
40°C 60°C T6 T6 T6
• Offset ceiling mount
55°C 75°C T5 T5 T5
• Offset wall mount
65°C 90°C T5 T5 T5
• Pole mount
• Pendant mount

Easily retrofit to: Weights:

• Existing Pauluhn™ DuraPro and MagnaPro fluorescent light fixtures
Luminaire lbs. kg.
• Rig-A-Lite™ and Snelson© C1D2 fluorescent lighting fixtures MLLA2 12.5 5.7
MLLA4 22.5 10.2

EATON'S CROUSE-HINDS 5
Photometrics: control room/pump shed

4 foot MLLA LED with 120o optics vs. 4 foot 2 lamp T5HO FVN

Illuminance
(Fc) MLLA4-UNV1 FVN4254

Average 44.87 33.78

Maximum 55.40 42.50
Minimum 25.20 18.90
Average/
MLLA4-UNV1 FVN4254 minimum 1.78 1.79
Maximum/
minimum 2.20 2.25
MLLA4-UNV1 FVN4254

Higher average illumination than

12 ft.
2 lamp T5HO FVN and up to 50%
8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft.
energy savings
Ceiling height = 9 ft. Ceiling height = 9 ft.

40 ft. 40 ft.

4 foot MLLA LED with 120o optics vs. 4 foot 2 lamp T8 FVN
Illuminance
(Fc) MLLA4-UNV1 FVN4232

Average 44.89 22.46

Maximum 55.50 28.30
Minimum 25.20 12.40
Average/
minimum 1.78 1.81
MLLA4-UNV1 FVN4232
Maximum/
minimum 2.20 2.28

MLLA4-UNV1 FVN4232
Twice the average illumination of
2 lamp T8 FVN
12 ft.
8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft.

Ceiling height = 9 ft. Ceiling height = 9 ft.

40 ft. 40 ft.

2 foot MLLA LED with 120o optics vs. 4 foot 2 lamp T8 FVN

Illuminance
(Fc) MLLA2-UNV1 FVN4232

Average 22.57 22.04

Maximum 27.90 27.70
Minimum 12.70 12.00
Average/
MLLA2-UNV1 FVN4232 minimum 1.78 1.84
Maximum/
minimum 2.20 2.31
MLLA2-UNV1 FVN232

12 ft.
Equivalent illumination to a 2
8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft. 8 ft.
lamp T8 FVN and up to 50%
Ceiling height = 9 ft. Ceiling height = 9 ft. energy savings
40 ft. 40 ft.

6 EATON'S CROUSE-HINDS
Ordering information – 120-277 VAC; 127-300 VDC
See page 10 for 347-480 VAC and "EM" models

Part number example

MLLAW4N-UNV1-S903-TF-P
Champ MLLA linear LED, warm white, 4 foot, 3/4” hubs, 80° narrow light pattern, 120-277 VAC driver, polycarbonate lens, through feed hubs, painted

MLLA W 4 N – UNV1 – S903 – TF – P

Series Lens Finish
Champ MLLA BLANK Clear glass BLANK Natural aluminum
MLLA linear LED S891 Diffused glass P Painted (gray, epoxy)
luminaire
Optics S903 Clear polycarbonate WH Painted (white, epoxy)
BLANK Wide (120°) S903D Diffused polycarbonate
Color temperature
N Narrow (80°)
BLANK Cool white, 5000K
Voltage
W Warm white, 3000K
UNV1 120-277 VAC; 127-300 VDC
See page 10 for 347-480 VAC option models
Length/lumens
4 4 ft. length, 7,900 lumens
2 2 ft. length, 3,700 lumens Cord options
TF Pull wire included in the fixture
*Cannot be combined with “TF” suffix. Standard models only, not
available with EM options.

Accessories (ordered separately)

DP1057MTK Flush/back mount back plate (compatible with DuraPro) PEND HAZ KIT Pendant mount kit
DP1050MTK Ceiling/swivel mount (compatible with DuraPro) SS KIT Safety chain kit
DP1053MTK Ceiling/wall mount offset (compatible with DuraPro) PM KIT 1.25 Pole mount kit, 1.25” conduit
MP1054MTK KIT Ceiling mount bracket and adapter kit (compatible with MagnaPro) PM KIT 1.5 Pole mount kit, 1.50” conduit
DP1052MTK Offset wall mount (compatible with DuraPro) PM KIT 2.0 Pole mount kit, 2.00” conduit

Replacement driver kits (ordered separately)

MLLA2-UNV1-DRIVER KIT 120-277 VAC driver replacement for 2ft linear (30W driver: EUC030S050DTM)
MLLA4-UNV1-DRIVER KIT 120-277 VAC driver replacement for 4ft linear (60W driver: EUC060S105DTM)
PLL EM1 DRIVER KIT Driver replacement kit for integral emergency battery back up option

*Dimensions & mounting options:

(1329.1) (157.9) (719.6)
52.33” 6.22” 28.33”
(68.58) (68.58)
2.70” 2.70”

MLLA4 MLLA2

Offset wall Flush ceiling Offset ceiling Ceiling/swivel Ceiling and adapter Pole mount Pendant mount
DP1052MTK DP1057MTK DP1053MTK DP1050MTK MP1054MTK KIT PM KIT 1.25/1.5/2.0 PEND HAZ KIT

*Dimensions and mounting options are the same for MLL and MLLA.

EATON'S CROUSE-HINDS 7
 1329.1
52.33 (4 FOOT MODEL)

Mounting options
[719.6]
28.33 (2 FOOT MODEL)

Ceiling/swivel mount
DP1050MTK

A
B
138.6
5.46

45° 45°
MLLA2 MLLA4
SCALE 3:4
Length in. mm. in. mm.

A 28.3 720 52.3 1329

B 9-27 222-681 9-51 222-1289

ADJUSTABLE MOUNTING
RANGE 8.75" - 50.75"

Pole mount A
PM KIT 1.25/1.5/2.0 B ALL MEASUREMENTS IN INCHES
Configuration A B C D
9.9
.390 PM KIT 1.25 4.331 3.543 1.680 1.693
ØC
1 PM KIT 1.5 3.740 2.953 2.000 1.535
D
PM KIT 2.0 3.386 2.598 2.360 1.378

1329.1
52.33 (4 FOOT MODEL) E
[719.6]
28.33 (2 FOOT MODEL) F

MLLA2 MLLA4
Length in. mm. in. mm.

E 28.3 720 52.3 1329

F 12-21 305-533 24-45 610-1143

MagnaPro mount
MP1054MTK KIT

138.6
5.46

45°
A

MLLA2 MLLA4
Length in. mm. in. mm.

A 28.3 720 52.3 1329

B 12-22 305-559 24-46 610-1168

8 EATON'S CROUSE-HINDS

1329.1
Mounting options

Offset wall
DP1052MTK

MLLA2 MLLA4
Length in. mm. in. mm.

A 28.3 720 52.3 1329

B 26.3 669 50.3 1278

Offset ceiling/wall mount

DP1053MTK

A
B

MLLA2 MLLA4
Length in. mm. in. mm.

A 28.3 720 52.3 1329

B 26.3 584 47.0 1194

Flush ceiling
DP1057MTK

MLLA2 MLLA4
Length in. mm. in. mm.

A 28.3 720 52.3 1329

B 6.2 157.5 18.2 462

EATON'S CROUSE-HINDS 9
Mounting options

Pendant mount - Class I, Div. 2 only

PEND HAZ KIT
A
B

MLLA2 MLLA4
Length in. mm. in. mm.

A 31.7 805 55.8 1418

B 28.3 720 52.3 1329
C 4.2 108 16.0 406
D 12.2 310 24.0 610
E 34.9 886 58.9 1495

Ordering information – 347-480 VAC model

See page 7 for 120-277 VAC; 127-300 VDC models
Part number example
MLL4N/UNV34 S903 TF P
Champ MLL linear LED, cool white, 4 foot, 1/2” hubs, 80° narrow light pattern, 347-480 VAC driver, polycarbonate lens, through feed hubs, painted

MLL 4 N /UNV34 S903 TF P

Series Optics Lens Finish
Champ MLL linear BLANK Wide (120°) S903 Clear polycarbonate BLANK Natural aluminum
MLL
LED luminaire N Narrow (80°) S903D Diffused polycarbonate P Painted (gray, epoxy)
WH Painted (white, epoxy)

Length/lumens Voltage Options Emergency backup

4 4 foot length, 7,900 lumens /UNV34 347-480 VAC TF Pull wire included in fixture BLANK Standard model (no battery back-up)
2 2 foot length, 3,900 lumens EM1 emergency battery back-up EM1* Integrated emergency battery back-up
/UNV1
model only * One year warranty. Remote EM Kit also available, 120-277 VAC
See page 7 for 120-277 VAC/127-300 VDC models. only. Contact factory for more information. All EM1 models are
painted, gray epoxy is standard.

Accessories (ordered separately) Accessories (ordered separately)

DP1057MTK Flush/back mount back plate (compatible with DuraPro) PEND HAZ KIT Pendant mount kit
DP1050MTK Ceiling/swivel mount (compatible with DuraPro) SS KIT Safety chain kit
DP1053MTK Ceiling/wall mount offset (compatible with DuraPro) VMVL/UNV1 80W 1A KIT 1 amp driver replacement kit 100-277 VAC for 4 ft. linear
MP1054MTK KIT Ceiling mount bracket and adapter kit (compatible with MagnaPro) VMVL/UNV34 80W 1A KIT 1 amp driver replacement kit 347-480 VAC for 4 ft. linear
DP1052MTK Offset wall mount (compatible with DuraPro) VMVL/UNV1 80W 0.5A KIT 0.5 amp driver replacement kit 100-277 VAC for 2 ft. linear
PM KIT 1.25 Pole mount kit, 1.25” conduit VMVL/UNV34 80W 0.5A KIT 0.5 amp driver replacement kit 347-480 VAC for 2 ft. linear
PM KIT 1.5 Pole mount kit, 1.50” conduit
PM KIT 2.0 Pole mount kit, 2.00” conduit

10 EATON'S CROUSE-HINDS
Battery back-up
Champ MLL linear LED
luminaires are now available
with an integral battery back-
up module. Virtually the same
size as the standard 4 foot
model and up to 90 minutes
of emergency lighting to keep
your facility and people safe.

Model EM output Normal output Certifications and compliances:

MLL4/UNV1 EM1
1,400 lumens 6,720 lumens NEC/CEC UL Standards
(100-277V) (100-277V)
• Class I, Division 2, Groups • UL844 Hazardous (Classified)
A, B, C, D
• UL1598 Luminaires, UL1598A
• Class II, Division 2, Groups Marine
F, G
Applications: • UL924 Emergency Lighting
• Wet Location, IP66, Type 4X
• Egress and emergency lighting for areas requiring
uninterrupted lighting during power failure CSA Standard
• Hazardous rated indoor and outdoor emergency • CSA C22.2 Nos. 250, 137, 141
lighting in manufacturing plants, heavy industrial,
chemical and petrochemical facilities, platforms,
loading docks and parking areas. Electrical ratings:

Voltage 120 277

Amperage @ 120VAC .48 .212
Key features:
Wattage @ 120VAC 57.8 57.7
• Operating ambient: 0°C to +40°C
Lumen output 6,720 6,720
• 90 minute runtime in emergency mode
Frequency 50/60Hz 50/60Hz
• 6,720 lumen output for normal operation
• 1,400 in emergency mode Power factor @ 100 VAC .997 .980

• 50,000 hours rated life @ 40°C THD 6.58 11.70

• IP66 rated enclosure

• LED indicator to check battery operation Temperature codes: Simultaneous
rating
• Nickel-cadmium battery
Ambient Min. temp. Class I, Class II, Class I, Div. 2,
• 1 year warranty temperature wire supply Div. 2 Div. I Class II, Div. 1

40°C 60°C T5 T6 T5

Dimensions:

EATON'S CROUSE-HINDS 11
U.S. (global headquarters): Canada Middle East Korea
Eaton's Crouse-Hinds business Toll Free: 800-265-0502 971 4 8066100 82-2-3484-6783
1201 Wolf Street FAX: (800) 263-9504 FAX: 971 4 8894813 82-2-3484-6778
Syracuse, NY 13208 FAX Orders only: (866) 653-0645 chmesales@eaton.com CCHK-sales@
(866) 764-5454 cooperindustries.com
FAX: (315) 477-5179
FAX Orders Only:
(866) 653-0640
crousecustomerctr@eaton.com Mexico/Latin America/Caribbean Singapore Australia
52-555-804-4000 65-6645-9888 61-2-8787-2777
FAX: 52-555-804-4020 FAX: 65-6297-4819 FAX: 61-2-9609-2342
ventascentromex@eaton.com chsi-sales@ CEASales@
For more information: cooperindustries.com cooperindustries.com

If further assistance is
required, please contact
an authorized Eaton
Europe (Germany) China India
Distributor, Sales Office,
49 (0) 6271 806-500 86-21-2899-3600 91-124-4683888
or Customer Service 49 (0) 6271 806-476 FAX: 86-21-2899-4055 FAX: 91-124-4683899
Department. sales.CCH.de@ cchsales@ cchindia@
cooperindustries.com cooperindustries.com cooperindustries.com

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com

© 2020 Eaton
All Rights Reserved Eaton is a registered trademark.
Printed in USA
Publication No. 5444-0520 All other trademarks are property
May 2020 of their respective owners.