Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    1125 (Eng)

    Uploaded by

    Sarthak Aggarwal
    HANWHA EVA 1125 is an ethylene vinyl acetate copolymer extrusion coating grade with a melt index of 18.0 and VA content of 22.0%. It has excellent processability and is designed for applications such as thermal film and flexible film extrusion coating. It complies with FDA regulations and has properties including low heat seal temperature, good drawability, adhesion to plastic films, and optical properties. Typical physical properties include a melt index of 18.0, density of 0.943 g/cm3, and vicat softening point of 52°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1125 (Eng)

    Uploaded by

    Sarthak Aggarwal
    49 views1 page
    HANWHA EVA 1125 is an ethylene vinyl acetate copolymer extrusion coating grade with a melt index of 18.0 and VA content of 22.0%. It has excellent processability and is designed for applications such as thermal film and flexible film extrusion coating. It complies with FDA regulations and has properties including low heat seal temperature, good drawability, adhesion to plastic films, and optical properties. Typical physical properties include a melt index of 18.0, density of 0.943 g/cm3, and vicat softening point of 52°C.

    Original Title

    1125(eng)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HANWHA EVA 1125 is an ethylene vinyl acetate copolymer extrusion coating grade with a melt index of 18.0 and VA content of 22.0%. It has excellent processability and is designed for applications such as thermal film and flexible film extrusion coating. It complies with FDA regulations and has properties including low heat seal temperature, good drawability, adhesion to plastic films, and optical properties. Typical physical properties include a melt index of 18.0, density of 0.943 g/cm3, and vicat softening point of 52°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    1125 (Eng)

    Uploaded by

    Sarthak Aggarwal
    HANWHA EVA 1125 is an ethylene vinyl acetate copolymer extrusion coating grade with a melt index of 18.0 and VA content of 22.0%. It has excellent processability and is designed for applications such as thermal film and flexible film extrusion coating. It complies with FDA regulations and has properties including low heat seal temperature, good drawability, adhesion to plastic films, and optical properties. Typical physical properties include a melt index of 18.0, density of 0.943 g/cm3, and vicat softening point of 52°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    HANWHA

    Ethylene Vinylacetate Copolymer 1125


    Extrusion Coating Grade MELT INDEX 18.0
    VA CONTENT 22.0

    HANWHA EVA 1125 is manufactured by high pressure autoclave process and designed for variety of
    extrusion coating application such as thermal film(Laminex film) and flexible film etc.. EVA 1125 is
    well known for its excellent processability and high quality assurance.

    This product complies with U.S. FDA regulation 21 CFR 177.1350(a)(1)

    ▣ Outstanding Properties ▣ Processing Conditions


    Very Low Heat Seal Temperature
    Cylinder: 160 ~ 240℃
    Good Drawability
    Adapter/Head: 240℃
    Good adhesion to Various Plastic Films
    T-Dies: 240℃
    Good Optical Property

    ▣ Additives
    Antioxidant

    ▣ Physical Properties
    Physical Properties Unit Test Method Value
    Melt Index g/10min ASTM D1238 18.0
    VA Content wt% HCC Method(3) 22.0
    Density g/㎤ ASTM D1505 0.943
    Vicat Softening Point ℃ ASTM D1525 52
    Melting Point ℃ ASTM D3417 80
    Tensile Strength at Break Kg/㎠ ASTM D638 145
    Elongation at Break % ASTM D638 900
    Brittleness Temperature, F0 ℃ ASTM D746 <-76
    Neck-in(4) cm - 8.0
    Allowable Coating Speed(4) m/min - >300
    Heat Seal Initiation Temperature(5) ℃ - 75

    1. These are typical properties: not to be construed as specification.


    2. The value for this property is dependent on part geometry and fabrication conditions.
    3. Elemental Analyzer and FT-IR
    4. Melt Temperature: 260℃, Line Speed: 100m/min, Output: 80kg/hr
    5. Layer Structure: PET(50 ㎛)/LDPE(25 ㎛)/EVA 1125(25 ㎛)
    Time/Pressure of Sealing: 1.0sec./2kg/㎠

    Hanwha B/D, 1 Changgyo-dong, Chung-ku, Seoul, Korea. Tel : 82-2-729-1292 Fax : 82-2-729-3000

    You might also like