Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Master SW Configuration-Edit Hammam

    Uploaded by

    Ali
    This document contains the configuration of a network switch. It sets the system name and time, configures Ethernet ports and VLANs for management and traffic, sets IP addresses and masks for each VLAN interface, enables NTP, and configures DHCP services including creating dhcpd.conf and dhcpd.pcy files to define the DHCP pool, subnet, and lease times. It restarts and enables the DHCP server, shows assigned IP addresses, and saves the configuration.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    Master SW Configuration-Edit Hammam

    Uploaded by

    Ali
    35 views4 pages
    This document contains the configuration of a network switch. It sets the system name and time, configures Ethernet ports and VLANs for management and traffic, sets IP addresses and masks for each VLAN interface, enables NTP, and configures DHCP services including creating dhcpd.conf and dhcpd.pcy files to define the DHCP pool, subnet, and lease times. It restarts and enables the DHCP server, shows assigned IP addresses, and saves the configuration.

    Original Title

    Master Sw Configuration-edit hammam

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the configuration of a network switch. It sets the system name and time, configures Ethernet ports and VLANs for management and traffic, sets IP addresses and masks for each VLAN interface, enables NTP, and configures DHCP services including creating dhcpd.conf and dhcpd.pcy files to define the DHCP pool, subnet, and lease times. It restarts and enables the DHCP server, shows assigned IP addresses, and saves the configuration.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    35 views4 pages

    Master SW Configuration-Edit Hammam

    Uploaded by

    Ali
    This document contains the configuration of a network switch. It sets the system name and time, configures Ethernet ports and VLANs for management and traffic, sets IP addresses and masks for each VLAN interface, enables NTP, and configures DHCP services including creating dhcpd.conf and dhcpd.pcy files to define the DHCP pool, subnet, and lease times. It restarts and enables the DHCP server, shows assigned IP addresses, and saves the configuration.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    You are on page 1of 4

    User Name: admin

    Password : switch

    -> show running-directory

    -> reload working no rollback-timeout


    (if "working" and "certified" not show up after the command "show running-
    directory")
    ------------------------------------
    Master and Slave Switch Configuratio
    -------------------------------------

    -> system name RIYC1W6043_SW2 (site


    ID_SW no.)

    -> system time 01:43:30 (Set


    Current Time)

    -> system date 05/08/2019 (set


    current date)

    -> interfaces 1/1-28 autoneg enable


    (fullduplex/halfduplex )

    -> vlan 100 name OAM (management


    Vlan)
    -> show vlan
    -> vlan 400 name AP-TWAG (Tranffic
    Vlan)

    -> vlan 400 port default 1/1-24 (Give


    Vlan access to Ethernet port)

    -> ip interface VLAN_100 address 10.3.112.x mask 255.255.255.192 vlan 100


    (give management Vlan the IP - Ip is switch IP and Switch Mask).

    -> aaa authentication default local

    -> aaa authentication console local

    -> aaa authentication ssh local

    -> aaa authentication telnet local


    -> vlan 100 802.1q 1/25-28 (tagging for
    the vlan)(set trunk Vlan)

    -> vlan 400 802.1q 1/25-28 (set trunk


    Vlan)

    -> ntp client enable

    -> show running-directory (Check


    setting saved)

    -> show configuration snapshot

    -> write memory flash-synchro


    (save setting)
    -> show interfaces port
    (statue of port dawn/up)

    -> show interfaces status


    (statue of dup)
    -> show vlan
    -> show system
    -> pwd
    -> ls
    -> cd working

    ---------------------------
    Master Switch Configuration
    ------------------------------

    -> reload working no rollback-timeout

    -> show running-directory

    CONFIGURATION STATUS
    Running CMM : PRIMARY,
    CMM Mode : MONO CMM,
    Current CMM Slot : 1,
    Running configuration : WORKING,
    Certify/Restore Status : CERTIFIED
    SYNCHRONIZATION STATUS
    Running Configuration : SYNCHRONIZED,

    -> ip interface VLAN_400 address 10.3.109.196 mask 255.255.255.192 vlan 400


    (set data Vlan IP and Mask)
    -> (set Management Vlan IP and Mask)
    -> pwd (show
    current Mode)
    /flash

    -> cd switch (go to


    switch mode)
    -> pwd
    /flash/switch

    -> pwd
    /flash/switch

    -> ls (show files in


    current mode)
    pw
    Listing Directory /flash/switch:

    drw 2048 May 15 02:39 ./


    drw 2048 May 15 02:37 ../
    -rw 105613 Feb 28 07:05 certs.pem
    drw 2048 Dec 31 1999 cloud/
    -rw 20 Dec 31 1999 snmp.engine
    -rw 0 Feb 28 07:06 pre_banner.txt
    -rw 12 Dec 31 1999 last_reboot
    -rw 23 Dec 31 1999 dhcpClient.db
    -rw 2 Dec 31 1999 stack_topology.txt
    -rw 286 May 15 02:41 dhcpd.conf
    -rw 76 Dec 31 1999 dhcpd.pcy
    -rw 286 May 15 02:41 dhcpd.conf.lastgood
    -rw 0 May 15 02:37 dhcpSrv.db

    40044544 bytes free

    -> vi dhcpd.conf (creat dhcpd.conf


    file)

    i --> past --> press Esc --> :wq --> enter

    -> more dhcpd.conf (show


    dhcpd.conf file)

    #l parameters
    option subnet-mask 255.255.255.192; ---------------> subnet mask
    option domain-name-servers 10.3.109.196;-------------> switch IP
    subnet 10.3.109.192 netmask 255.255.255.192
    {
    dynamic-dhcp range 10.3.109.197 10.3.109.254 ----------> pool
    {
    option routers 10.3.109.193; ------------------------> GW ( router IP )
    option vendor-specific [7f040ab7cc01];-------------> fixed
    option dhcp-lease-time 20000;----------------------> fixed
    }
    }
    _________________________________________________________________________

    -> more dhcpd.pcy (creat


    dhcpd.pcy file)
    pingDelay = 200
    pingAttempts = 3
    PingSendDelay = 1000
    Defaultlease = 86400

    --------------------------------------------

    WED MAY 15 02:55:57 : DHCP-SERVER (140) info message:


    +++ /flash/switch/dhcpd.conf processed with 1 subnets

    -> dhcp-server restart (restart


    dhcp server)

    -> dhcp-server enable (enable dhcp


    server)

    ->show dhcp-server leases (show AP IP


    distriputed by dhcp server)

    -> show lanpower 1


    > lanpower stop 1
    > lanpower start 1

    -> write memory flash-synchro (save


    configuration setting)

    -> show running-directory

    -> show configuration snapshot

    -> show interfaces port


    -> show vlan
    -> show system

    --------------------------------------------

    END

    You might also like