This help command provides descriptions of various subcommands available in the Realtek command line interface. Some of the subcommands include:
- help - Prints command descriptions and usage.
- panel - Selects a panel configuration from a factory array or loads a specific panel binary file.
- ampinit - Runs an amplifier speaker initialization task via I2C.
- gpio - Provides GPIO command functionality and description.
- loady - Loads a binary file over a serial line using ymodem protocol.
- go - Starts application execution at a given address or starts running firmware.
This help command provides descriptions of various subcommands available in the Realtek command line interface. Some of the subcommands include:
- help - Prints command descriptions and usage.
- panel - Selects a panel configuration from a factory array or loads a specific panel binary file.
- ampinit - Runs an amplifier speaker initialization task via I2C.
- gpio - Provides GPIO command functionality and description.
- loady - Loads a binary file over a serial line using ymodem protocol.
- go - Starts application execution at a given address or starts running firmware.
This help command provides descriptions of various subcommands available in the Realtek command line interface. Some of the subcommands include:
- help - Prints command descriptions and usage.
- panel - Selects a panel configuration from a factory array or loads a specific panel binary file.
- ampinit - Runs an amplifier speaker initialization task via I2C.
- gpio - Provides GPIO command functionality and description.
- loady - Loads a binary file over a serial line using ymodem protocol.
- go - Starts application execution at a given address or starts running firmware.
This help command provides descriptions of various subcommands available in the Realtek command line interface. Some of the subcommands include:
- help - Prints command descriptions and usage.
- panel - Selects a panel configuration from a factory array or loads a specific panel binary file.
- ampinit - Runs an amplifier speaker initialization task via I2C.
- gpio - Provides GPIO command functionality and description.
- loady - Loads a binary file over a serial line using ymodem protocol.
- go - Starts application execution at a given address or starts running firmware.
facro - FACTORY read-only sub system factory - FACTORY sub system fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) go - start application at address 'addr' or start running fw gpio - GPIO command description/usage help - print command description/usage icache - enable or disable instruction cache irda - irda - select irda protocol kboot - start kboot function layout - show flash layout loady - load binary file over serial line (ymodem mode) logbuf - rtd logbuffer sub system loglevel- set console loglevel to env and bootcode will pass this value to kerne l lsadc - Test md - memory display mmc - MMC sub system mtest - simple RAM read/write test mw - memory write (fill) panel - select the specific panel config from factory or panel array ping - send ICMP ECHO_REQUEST to network host print - print - turn on/off print message.
pwm - PWM command description/usage
reset - Perform RESET of the CPU rtkmmc - RTK MMC direct function saveenv - save environment variables to persistent storage sb2_dbg - start sb2_dbg test sb2_timeout- start sb2_timeout test scutest - SCU read/write test setuart - uart - turn on/off uart0.
showvdq - showvdq - show vdq info
sleep - delay execution for some time swu - FW upgrade sub-system swuu - FW upgrade sub-system test_i2c- test_i2c tftp - download image from TFTP server tftpput - TFTP put command, for uploading files to a server thread - thread create
timelog - set the bootloader time log [on|off]
tuner - tuner - select tuner model;
usb - USB sub-system wdt - watch dog enable/disable Realtek> panel panel - select the specific panel config from factory or panel array
Usage: panel [option] [bin_file_name] panel a - list all supported panel configs from panel array panel -a - list all supported panel configs from factory panel -s fname - specific panel binary file as default config Realtek> ampinit Unknown command 'ampinit' - try 'help' Realtek> ampinit I2C Amp Init ...
