Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Technica Clarification

    Uploaded by

    Ghar Ka Swaad
    The email exchange discusses technical details regarding core shafts used in sizing stand rolls for steel mills. Manoj from the supplier confirms that the core shafts are used in sizing stand rolls mounted with tungsten carbide composite rings under high pressure for rolling steel at speeds up to 16m/sec. He also confirms that the center holes of the shafts are to be flame hardened to 40HRC and ground to a surface finish of RA 0.8. Each shaft will be individually packaged and labeled with purchase order details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technica Clarification

    Uploaded by

    Ghar Ka Swaad
    28 views2 pages
    The email exchange discusses technical details regarding core shafts used in sizing stand rolls for steel mills. Manoj from the supplier confirms that the core shafts are used in sizing stand rolls mounted with tungsten carbide composite rings under high pressure for rolling steel at speeds up to 16m/sec. He also confirms that the center holes of the shafts are to be flame hardened to 40HRC and ground to a surface finish of RA 0.8. Each shaft will be individually packaged and labeled with purchase order details.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The email exchange discusses technical details regarding core shafts used in sizing stand rolls for steel mills. Manoj from the supplier confirms that the core shafts are used in sizing stand rolls mounted with tungsten carbide composite rings under high pressure for rolling steel at speeds up to 16m/sec. He also confirms that the center holes of the shafts are to be flame hardened to 40HRC and ground to a surface finish of RA 0.8. Each shaft will be individually packaged and labeled with purchase order details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    Technica Clarification

    Uploaded by

    Ghar Ka Swaad
    The email exchange discusses technical details regarding core shafts used in sizing stand rolls for steel mills. Manoj from the supplier confirms that the core shafts are used in sizing stand rolls mounted with tungsten carbide composite rings under high pressure for rolling steel at speeds up to 16m/sec. He also confirms that the center holes of the shafts are to be flame hardened to 40HRC and ground to a surface finish of RA 0.8. Each shaft will be individually packaged and labeled with purchase order details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Subject Re: Fwd: TR clarification- reg.

    From Manoj Choudhary


    <manoj@steeliumexports.in>
    To <ashak@vizagsteel.com>
    Cc <xiaogg@zccamerica.com>, RAJENDRA
    PRASAD M राजेंद्र प्रसाद एम
    <rpmatta@vizagsteel.com>, VINUSHA
    NAMADI विनुषा नमडी
    <vinushanmd@vizagsteel.com>
    Reply-To <manoj@steeliumexports.in>
    Date 29-07-2021 20:40

    CAUTION: This email is from an external source. Discard the mail, if the sender is not known. Do not click on hyper links, which
    are part of the content.

    Dear Sir,
     
    Yes we confirmed :-
    THE CORE SHAFTS ARE USED IN SIZING STAND ROLLS OF SBM, ON WHICH TUNGSTEN CARBIDE COMPOSITE (TC)
    RINGS ARE MOUNTED AND HYDRAULICALLY LOCKED @ 1200 BAR PRESSURE AND USED FOR ROLLING. MAXIMUM
    MILL SPEED IS 16M/SEC.
     
    Many Thanks and Best Regards.
     

    Manoj Choudhary

    India Representative
    Zhuzhou Cemented Carbide Works USA INC
    ZCC Group  
    A Member of Minmetals

    INDIA MOBILE # + 91-9866071356

    Please don't print this mail unless you really need to.

    Every 3000 sheets of paper cost us a tree. Save Paper, Save Trees.
     
     

    From: ashak@vizagsteel.com

    Sent: Thursday, July 29, 2021 3:56 PM

    To: manoj@steeliumexports.in

    Cc: xiaogg@zccamerica.com, "RAJENDRA PRASAD M राजेंद्र प्रसाद एम" <rpmatta@vizagsteel.com>, "VINUSHA NAMADI
    विनुषा नमडी" <vinushanmd@vizagsteel.com>

    Subject: Re: Fwd: TR clarification- reg.


     

    Dear Sir,

    Further to the trailing mail, Please confirm the application point of item 1 at the earliest.

    On 28-07-2021 23:17, Manoj Choudhary wrote:

    CAUTION: This email is from an external source. Discard the mail, if the sender is not known. Do not click on hyper links, which
    are part of the content.

     
    Dear Sir / Madam,
     
    We Confirmed this two points as required by you.
     
    Yes its  60° CENTRE HOLES SHOULD BE FLAME HARDENED TO 4 0 HRC. GROUND IT TO SURFACE FINISH OF RA 0.8.
     
    Yes this PACKI NG TO BE DONE IN INDIVIDUAL CASE FOR EACH SHAFT. PURCHASE ORDER NO., PURCHASE ORDER
    ITEM NO., CATALOGUE NO will be indicated on each box.
     
    We would like to inform you that you don't worry about quality guarantee, since its our ZCC own designed and
    technology, this kind of shaft will be specially made for Composite rolls.
     
    Please feel free to ask us if any other question.

     
    Many Thanks and Best Regards.
     

    Manoj Choudhary

    India Representative
    Zhuzhou Cemented Carbide Works USA INC
    ZCC Group  
    A Member of Minmetals

    INDIA MOBILE # + 91-9866071356


    Please don't print this mail unless you really need to.

    Every 3000 sheets of paper cost us a tree. Save Paper, Save Trees.
     
     

    From: ashak@vizagsteel.com

    Sent: Wednesday, July 28, 2021 3:53 PM

    To: manoj@steeliumexports.in, xiaogg@zccamerica.com

    Cc: "RAJENDRA PRASAD M राजेंद्र प्रसाद एम" <rpmatta@vizagsteel.com>, "VINUSHA NAMADI विनुषा नमडी"
    <vinushanmd@vizagsteel.com>

    Subject: Fwd: TR clarification- reg.


     

    Dear Sir,

    Please find the attached filled TR sheet in which some of the points are not completely visible(like Special instruction point no 2 & 6
    and application).Kindly confirm the same at the earliest.

    DISCLAIMER: The information in this message is Visakhapatnam Steel Plant confidential and may be legally privileged. It is
    intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient,
    any disclosure, any copying or distribution of the message or any action or omission taken by you in reliance on it, is prohibited and
    may be unlawful. Please contact the sender immediately if you have received this message in error.

    सूचना : ई-मेल संरक्षा प्रणाली के माध्यम से इस ई-मेल की जाँच की गयी है |

    NOTE: This email is passed through the Email Security Appliance.

    DISCLAIMER: The information in this message is Visakhapatnam Steel Plant confidential and may be legally privileged. It is intended
    solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any
    disclosure, any copying or distribution of the message or any action or omission taken by you in reliance on it, is prohibited and may
    be unlawful. Please contact the sender immediately if you have received this message in error.

    सूचना : ई-मेल
    संरक्षा प्रणाली के माध्यम से इस ई-मेल की जाँच की गयी है |

    NOTE: This email is passed through the


    Email Security Appliance.

    You might also like