JABIRU ENGINE PARTS BOOK

3300 SERIES
Jabiru Aircraft Pty Ltd ACN 010 910 077
PO Box 5792 Bundaberg
Australia 4670
Australia: Phone 07 4155 1778 Fax 07 4155 2669
International: Phone + 61 7 4155 1778 Fax + 61 7 4155 2669
Email: info@jabiru.net.au
Web: www.jabiru.net.au June 2001
Please fill in your engine and aircraft details for future reference.

Engine Serial #: 33L-117

Aircraft Type: JABIRU AIRCRAFT PTY LTD

Model: J230-D

Serial #: 848

Registration #: N230AD

Note:
1. Not all parts are illustrated
2. Parts not serviced individually are noted as NSS
3. All efforts are made to ensure accuracy at the time of publication, if you find
any discrepancies, or have any questions about the contents of this publication
please contact Jabiru Aircraft Pty Ltd.
4. This parts listing is divided into sections A to O. The pages are identified with a
letter for the section, followed by a page number for the section and another
digit to indicate the issue level for that page only.
5. All quantities are per engine unless stated otherwise.

6. When ordering parts always quote engine serial number and any upgrades carried out
on the engine, as well as item number, part number, description, section letter, page
number and issue number. This complete information will ensure Jabiru Aircraft Pty Ltd
supply the correct part.
 Engine Parts Catalogue Index

Section Description

A Cylinder Head

B Crankcase Crankshaft and Camshaft

C Conrod Piston and Barrel

D Valves Assembly

E Lubrication System

F Flywheel and Ignition

G Induction System

H Engine Mount and Fittings

I Exhaust and Muffler

J Gearbox Assembly

K Starter Motor

L Sump Dipstick and Breather

M Rocker Lubrication and Venting

N Carburettor Assembly

O Miscellaneous Electrical

P Air Cooling Ducts

 Jabiru 3300 Engine

Section A: CYLINDER HEAD

ITEM PART # ISS DESCRIPTION QTY

1 4633074 2 TUBE PUSH ROD COVER 12

2 PG10042N ’O’RING BS114V 24
3 PH0666N 1 WASHER BELLEVILLE 36
452318N 1 WASHER 36
4 PH72E24 CAP SCREW 1 1/2 X 5/16 UNF 36
5 4657082 1 CYLINDER HEAD 6 NSS
PH9852N PLUG 1/8 NPT 6
6 PI10582N SPARK PLUG 12
7 PG0168N 1 ‘ O’RING BS237V 6
8 4641084 2 ROCKER COVER 6
9 PH72624 CAP SCREW 5/8 X 1/4 UNC 24
AN960-416 WASHER 24
10 4590074 4 VALVE GUIDE 12
11 PH0515N CIRCLIP (20 INT) 12
12 4659084 2 VALVE SEAT INSERT INLET 6
4660084 2 VALVE SEAT INSERT EXHAUST 6

Cylinder Head Assemblies available incorporating :

Cylinder Head
Valve Guides
Valve Seat Inserts

Note: Oversize valve guides available, use std P/N & specify 0.05, 0.10, 0.15
Oversize. Identification is by 1, 2 or 3 dimples on exposed diameter when
Fitted to assembled head

S/N 01 – 52 for these heads

To S/N 33A47

Section A- 1 -1
 Jabiru 3300 Engine

Section A- 2 -2
 Jabiru 3300 Engine

Section A: CYLINDER HEAD

ITEM PART # ISS DESCRIPTION QTY

1 4633074 2 TUBE PUSH ROD COVER 12

2 PG10042N ’O’RING BS114V 24
3 452329N 1 WASHER 3.5 X 19 Dia. 24
4523394 1 WASHER 3.5 X 20 Dia WITH FLAT 6
4 PH72C24 CAP SCREW 1 1/2 X 5/16 UNF 30
PH0830N BOLT 3 X 5/16 UNF 6
5 4777092 4 HEAD EXT FINS & CTRS 6 NSS
PH9852N PLUG 1/8 NPT 6
6 PI10582N SPARK PLUG 12
7 PG0168N 1 ‘ O’RING BS237V 6
8 4641084 2 ROCKER COVER 6
9 PH72624 CAP SCREW 5/8 X 1/4 UNC 24
AN960-416 WASHER 24
10 4590074 4 VALVE GUIDE 12
11 PH0515N CIRCLIP (20 INT) 12
12 4659084 2 VALVE SEAT INSERT INLET 6
4660084 2 VALVE SEAT INSERT EXHAUST 6
13 4747094 4 WASHER BETWEEN PORTS 6
14 4686084 3 LUBE PIPE 30.5 LONG 8

Cylinder Head Assemblies available incorporating :

Cylinder Head
Valve Guides
Valve Seat Inserts

Note: Oversize valve guides available, use std P/N & specify 0.05, 0.10, 0.15
Oversize. Identification is by 1, 2 or 3 dimples on exposed diameter when
Fitted to assembled head

S/N 53 – 223 for these heads

From S/N 33A48 TO 33A118

Section A- 3 -2
 Jabiru 3300 Engine

Section A- 4 -2
 Jabiru 3300 Engine

Section A: CYLINDER HEAD

ITEM PART # ISS DESCRIPTION QTY

1 4633074 2 TUBE PUSH ROD COVER 12

2 PG10042N ’O’RING BS114V 24
3 452329N 1 WASHER 3.5 X 19 Dia. 24
4788004 1 WASHER 3.5 X 19 Dia WITH FLAT 6
4 PH72C24 CAP SCREW 1 1/2 X 5/16 UNF 6
PH0820N CAP SCREW 1 ¾ X 5/16 UNF 18
PH0830N BOLT 3 X 5/16 UNF 6
PH0840N BOLT 4 X 5/16 UNF 6
5 4781002 1 HEAD OFFSET FINS to S/N 33A223 6 NSS
4903012 1 HEAD NEW CHAMBER from S/N 33A224 6 NSS
PH9852N PLUG 1/8 NPT 6
6 PI10582N SPARK PLUG 12
7 PG0168N 1 `O'
RING BS237V 6
8 4641084 2 ROCKER COVER 6
9 PH72624 CAP SCREW 5/8 X 1/4 UNC 24
AN960-416 WASHER 24
10 4590074 4 VALVE GUIDE 12
11 PH0515N CIRCLIP (20 INT) 12
12 4659084 2 VALVE SEAT INSERT INLET 6
4660084 2 VALVE SEAT INSERT EXHAUST 6
13 4747094 4 WASHER BETWEEN PORTS 6
14 4686084 3 LUBE PIPE 30.5 LONG 8

Cylinder Head Assemblies available incorporating :

Cylinder Head
Valve Guides
Valve Seat Inserts

Note: Oversize valve guides available, use std P/N & specify 0.05, 0.10, 0.15
Oversize. Identification is by 1, 2 or 3 dimples on exposed diameter when
Fitted to assembled head

From 33A119

Section A- 5 -2
 Jabiru 3300 Engine

Section A- 6 -2
 Jabiru 3300 Engine

Section B: CRANKSHAFT, CRANKCASE AND CAMSHAFT

ITEM PART # ISS DESCRIPTION QTY

1 4643084 2 GEAR CRANKSHAFT 1
2 4292044 2 STUD SHORT 4
3 MS21042-6 1 NUT CRANKCASE STUD 18
4 4291044 2 STUD LONG 10
5 BEARING SET MAIN 1
6 4629072 1 CRANKSHAFT 1
PH9912N WELSH PLUG 28 DIA 1
PH0646N WELSH PLUG 7/8 DIA 1
PH0636N GRUB SCREW 1/4 X 1/4 UNF 1
7 4621072 1 CRANKCASE RS 1 NSS
4622072 1 CRANKCASE LS 1 NSS
PH9852N PLUG 1/8 NPT 1
8 4347054 6 DOWEL CRANKCASE 14
9 4293044 2 STUD FRONT 2
10 PB9942N THRUST BEARING 2
11 PH0676N CAP SCREW 3/4 X 3/8 UNF 6
12 PH0279N WASHER 6
13 4525064 6 FLANGE PROP MOUNT STANDARD 1
466218N 1 FLANGE PROP MOUNT 2” EXTENSION 1
14 4688084 1 GUIDE PROP BOLT 6
15 4625072 3 CAM SHAFT 1
PH10012N WELSH PLUG 10 DIA 1
16 4282044 4 HOUSING FRONT OIL SEAL 1
17 PH0535N CAP SCREW 3/4 X 1/4UNC 4
18 PG9872N OIL SEAL 1
19 PG0035N '
O'RING BS112V 10
20 4081223 3 PLATE PROP MOUNT 1

Crankcase halves are not sold separately.

Section B- 1 -2
 Jabiru 3300 Engine

Section B- 2 -2
 Jabiru 3300 Engine

Section C: CONROD PISTON AND BARREL

ITEM PART # ISS DESCRIPTION QTY

1 4651084 1 CONNECTING ROD ASSY 6

CONSISTS OF :-
4651183 2 CONNECTING ROD 1 NSS
4651284 2 CAP CONNECTING ROD 1 NSS
PB0055N BEARING 0.25 NSS
PH72E24 1 CAP SCREW 1 X 5/16 UNF 2
PB0045N DOWEL 2
2 4299054 4 GUDGEON PIN 6
3 PG00454 CIRCLIP 23 12
4 PG0055N PISTON RING OIL SCRAPER 12
5 PG0065N PISTON RING #2 6
6 PG0075N PISTON RING #1 6
PG0085N RING EXPANDER 6
7 4685083 1 PISTON up to S/N 33A223 6
4891013 1 PISTON NEW CHAMBER from S/N 33A224
8 PG0025N ‘ O’RING BS155V 6
9 4554062 5 BARREL 106.5 (Length) Up to S/N 33A153 6
4807002 1 BARREL 107 (Length) From S/N 33A154 6
10 4679084 1 SHIM BARREL 0.5 THICK AS REQ’D

Note: Mixing of Piston types (S/N) not recommended.

Section C- 1 -2
 Jabiru 3300 Engine

Section C- 2 -2
 Jabiru 3300 Engine

Section D: VALVE ASSEMBLY

ITEM PART # ISS DESCRIPTION QTY

1 PG92324 1 VALVE LIFTER 12

2 4642084 2 PUSH ROD 12
3 4647084 1 ROCKER - TAPPET #1 LS to S/N33A52 6
464808N 1 ROCKER - TAPPET #1 RS to S/N33A52 6
4769094 1 ROCKER - OFFSET #1 LS S/N33A53 ON 6
477009N 1 ROCKER - OFFSET #1 RS S/N33A53 ON 6
4 MS21042L6 1 LOCK NUT 12
5 4593074 3 ADJUSTING SCREW 12
6 4594074 2 ROCKER SHAFT 6
7 R59452 ‘ O’RING 12 dia 12
8 PB0035N BUSH 12
9 PH0505N CAP SCREW 1 X 1/4UNC 6
10 4604074 1 TOP SPRING WASHER 12
11 4605074 2 VALVE COLLET 24
12 PG71E24 1 VALVE SPRING 12
13 PG71C24 1 VALVE SPRING BOTTOM SEAT 12
14 4595074 1 INLET VALVE 6
4596074 1 EXHAUST VALVE 6

Section D- 1 -2
 Jabiru 3300 Engine

Section D- 2 -2
 Jabiru 3300 Engine

Section E: LUBRICATION SYSTEM

ITEM PART # ISS DESCRIPTION QTY

1 PG10162N 1 OIL FILTER 1

2 4652084 3 OIL PUMP HOUSING 1 NSS
PH0625N CAP SCREW 1 1/4 X 5/16UNC 4
3 472606N 1 OIL PUMP OUTER GEAR 1 NSS
4 PH115334 1 KEY WOODRUFF 1
5 466108N 1 OIL PUMP INNER GEAR 1 NSS
6 PG10122N ’O’RING BS143V 1
7 4280044 5 BACKING PLATE 1
8 PX101324 1 SPRING PRESSURE RELIEF 1
9 4536064 3 VALVE RELIEF 1
10 PH06864 1 WASHER 1
11 PH10142N CIRCLIP 1
12 PI10182N OIL PRESSURE SENDER 1
13 4649084 1 OIL PICKUP TUBE 1
PG10042N `O’RING BS114V 1
4796004 1 OIL PICKUP & STRAINER 1
Consists of:
4796104 1 OIL PICKUP BODY 1
4796204 1 OIL PICKUP TUBE 1
4584364 2 MESH SCREEN OIL PICKUP 1

14 AN960-416 WASHER (OPTION) 1

15 4581064 5 ADAPTOR OIL COOLER 1
16 4580064 4 THREADED ADAPTOR 1
17 4120534 2 FITTING OIL FILTER 1
18 PG0137N ‘O’RING BS227V 1
19 PZ0086N HOSETAIL NIPPLE 1/8 NPT – 5/16 2

Section E- 1 -2
 Jabiru 3300 Engine

Section E- 2 -2
 Jabiru 3300 Engine

Section F: FLYWHEEL & IGNITION SYSTEM

ITEM PART # ISS DESCRIPTION QTY

1 4628073 4 REAR PLATE ENGINE MOUNT to S/N33A48 1

4734093 1 REAR PLATE ENGINE MOUNT from 1
S/N33A49
2 4626073 1 FLYWHEEL ASSY 1
CONSISTS OF :-
4626173 1 FLYWHEEL 1
4315054 5 POLE PLATE CENTRE 3 NSS
4316054 4 POLE PLATE OUTER 3 NSS
PM0065N 1 MAGNET 9 NSS
PH0747N C’SK SKT SCREW 1/2 X 1032 12 NSS
4066423 6 RING GEAR 1
3 4627073 3 ALTERNATOR MOUNT 1 NSS
4 AN4-37A BOLT 4
5 PG9862 ROLL PIN 5/32 X 3/8 8
6 PH0505N CAP SCREW 1 X 1/4UNC 4
7 PII0522N 1 COIL – IGNITION 2
8 4646084 1 SPACER FLYWHEEL & VAC. DRIVE 1
9 4664084 1 ALTERNATOR BODY ASSY To S/N 33A163 1
3 PHASE
4821004 1 ALTERNATOR BODY ASSY From S/N 33A164 1
SINGLE PHASE
PH10372N ROLL PIN 5/8 X 1/8 DIA 4
10 PH0696N CAP SCREW 1/2 X 3/16 UNC 4
11 4665084 1 STATOR ASSY 3 PHASE To S/N 33A163 1
4665084 1 STATOR ASSY 1 PHASE FROM S/N 33A164 1
12 MS35207-267 SCREW 1” LONG 4
13 PH0656N CAP SCREW 1 1/4 X 5/16 UNF 6
14 4678084 1 MOUNTING BLOCK COIL & REAR PLATE 4
15 PG0180N CAP DISTRIBUTOR *GB74 2
16 PG0190N ROTOR *BH73 2
17 4096124 1 CLIP DISTRIBUTOR CAP (23 Long) 4
4881014 1 CLIP DISTRIBUTOR CAP (20 Long) 4
18 PH72B24 CAP SCREW 1 1/4 X 3/16 UNC 4
19 PI11763N TACHO SENDER 1
20 4666084 4 SPACER STATOR MOUNTING 1
21 PI119034 HT LEAD KIT 1
22 4389054 1 POST TACHO SENDER to S/N 33A223 1
4884014 1 POST TACHO SENDER from S/N 33A224 1
23 4885014 1 TACHO PICKUP from S/N 33A224 2
24 PH1021N CAP SCREW ½ X ¼ UNC 6

Section F - 1 -2
 Jabiru 3300 Engine

Section F - 2 -2
 Jabiru 3300 Engine

Section G: INDUCTION SYSTEM

ITEM PART # ISS DESCRIPTION QTY

1 4109824 2 GASKET 6
2 1 INDUCTION PIPE # 1 TOP 1 NSS
PH0535N CAP SCREW 3/4 X 1/4UNC 18
3 1 INDUCTION PIPE # 3 TOP 1 NSS
4 1 INDUCTION PIPE # 5 TOP 1 NSS
5 1 INDUCTION PIPE # 2 TOP 1 NSS
6 1 INDUCTION PIPE # 4 TOP 1 NSS
7 1 INDUCTION PIPE # 6 TOP 1 NSS
8 1 INDUCTION PIPE # 1 BOTTOM 1 NSS
PG10212N `O’RING BS124V 6
9 1 INDUCTION PIPE # 3 BOTTOM 1 NSS
10 1 INDUCTION PIPE # 5 BOTTOM 1 NSS
11 1 INDUCTION PIPE # 2 BOTTOM 1 NSS
12 1 INDUCTION PIPE # 4 BOTTOM 1 NSS
13 1 INDUCTION PIPE # 6 BOTTOM 1 NSS
14 PV102924 1 HOSE INDUCTION 6
PG102924 CLAMP 12
15 PH72624 CAP SCREW 5/8 X 1/4 UNC 2
16 4690084 3 HEAT SHIELD 1
17 4667084 1 ADAPTOR SUMP - CARBY 1
18 4691084 1 COUPLING RUBBER 1
19 4886014 1 CARBY ASSY 40 DIA 1
20 4567064 4 FUEL PUMP (Not illustrated) 1
PH72624 CAP SCREW 5/8 X 1/4UNC 2
4510054 2 PUSH ROD FUEL PUMP 1
2650-8FG FIRE SLEEVE 0.35
PT0019N FUEL HOSE 0.35
PZ0059N CLAMP 2

Note: Induction pipes not sold separately order as P/N SET 4 FOR 3300

Up to S/N 33A67

Section G- 1 -1
 Jabiru 3300 Engine

Section G- 2 -1
 Jabiru 3300 Engine

Section G: INDUCTION SYSTEM

ITEM PART # ISS DESCRIPTION QTY

1 4109824 2 GASKET 6
2 4748093 1 INDUCTION PIPE # 1 TOP 1
PH0535N CAP SCREW 3/4 X 1/4UNC 18
3 4750093 1 INDUCTION PIPE # 3 TOP 1
4 4752093 1 INDUCTION PIPE # 5 TOP 1
5 4749053 1 INDUCTION PIPE # 2 TOP 1
6 4751093 1 INDUCTION PIPE # 4 TOP 1
7 4753093 1 INDUCTION PIPE # 6 TOP 1
8 4754094 1 INDUCTION PIPE # 1 BOTTOM 1
PG10212N `O’RING BS124V 6
9 4756094 1 INDUCTION PIPE # 3 BOTTOM 1
10 4887014 1 INDUCTION PIPE # 5 BOTTOM 1
11 4755094 1 INDUCTION PIPE # 2 BOTTOM 1
12 4757094 1 INDUCTION PIPE # 4 BOTTOM 1
13 4758094 1 INDUCTION PIPE # 6 BOTTOM 1
14 PV102924 1 HOSE INDUCTION 6
PG102924 CLAMP 12
15 PH0615N CAP SCREW 2 X 1/4 UNC 5
16 4690084 3 HEAT SHIELD 1
17 4667084 1 ADAPTOR SUMP - CARBY 1
18 4691084 1 COUPLING RUBBER 1
19 4886014 1 CARBY ASSY 40 DIA 1
20 4567064 4 FUEL PUMP (Not illustrated) 1
PH72624 CAP SCREW 5/8 X 1/4UNC 2
4510054 2 PUSH ROD FUEL PUMP 1
2650-8FG FIRE SLEEVE 0.35
PT0019N FUEL HOSE 0.35
PZ0059N CLAMP 2
21 4773093 6 INDUCTION BODY HALF 2
22 4773194 2 DIFFUSER 1

From S/N 33A68

Section G- 3 -1
 Jabiru 3300 Engine

Section G- 4 -1
 Jabiru 3300 Engine

Section H: ENGINE MOUNT ASSEMBLY

ITEM PART # ISS DESCRIPTION QTY

1 AN4-31A BOLT 4
2 PG10712N CUSHION MOUNT FEMALE 4
3 PG10722N CUSHION MOUNT MALE 4
4 4094224 2 WASHER ENGINE MOUNT 4
5 AN960-416 WASHER 4
6 MS21042-4 NUT 4

Section H- 1 -1
 Jabiru 3300 Engine

Section H- 2 -1
 Jabiru 3300 Engine

Section I: EXHAUST & MUFFLER – TRACTOR

ITEM PART # ISS DESCRIPTION QTY

1 4681083 2 EXHAUST MANIFOLD LS 1

4103224 2 GASKET EXHAUST PIPE 6
PH0535N CAP SCREW 3/4 X 1/4 UNC 18
2 4682083 2 EXHAUST MANIFOLD RS 1
3 PE01094 1 SPRING 4
4 4795003 1 MUFFLER ASSY 1

Section I- 1 -1
 Jabiru 3300 Engine

Section I- 2 -1
 Jabiru 3300 Engine

Section I: EXHAUST & MUFFLER – PUSHERR

ITEM PART # ISS DESCRIPTION QTY

1 480500N 2 EXHAUST MANIFOLD LS 1

4103224 2 GASKET EXHAUST PIPE 6
PH0535N CAP SCREW 3/4 X 1/4 UNC 18
2 480600N 2 EXHAUST MANIFOLD RS 1
3 PE01094 1 SPRING 4
4 4746093 1 MUFFLER ASSY (outlet pipes not welded in) 1

Section I- 3 -1
 Jabiru 3300 Engine

Section I- 4 -1
 Jabiru 3300 Engine

Section J: GEARBOX ASSEMBLY

ITEM PART # ISS DESCRIPTION QTY

1 4631073 2 GEAR HOUSING 1

2 PH0535N CAP SCREW 3/4 X 1/4UNC 3
3 PG10612N SEAL REAR 1
4 4066123 4 GEAR INNER CAMSHAFT 1
5 4333054 3 GEAR OUTER CAMSHAFT 1
PH100224 BOLT AN4H6A 4
4538064 2 SPACER CAM TIMING GEARS 1
6 PH0595N CAP SCREW 1 1/2 X 1/4UNC 4
7 PG10622N SEAL 15 X 24 X 7 2
8 4656084 1 DISTRIBUTOR CAP MOUNTING PLATE 2
9 4653084 1 DISTRIBUTOR DRIVE SHAFT ASSY 2
CONSISTS OF:
4653184 1 DISTRIBUTOR DRIVE SHAFT 1 NSS
4333054 3 DISTRIBUTOR DRIVE GEAR 1 NSS
PH0736N RIVET 4 NSS
10 4632074 3 SPACER DISTRIBUTOR MOUNTING 2
11 PH1021N CAP SCREW 1 1/4 X 1/4UNC 8
12 PH0595N CAP SCREW 1 1/2 X 1/4UNC 2

Section J- 1 -1
 Jabiru 3300 Engine

Section J- 2 -1
 Jabiru 3300 Engine

Section K: STARTER MOTOR

ITEM PART # ISS DESCRIPTION QTY

1 AN4-53A BOLT 2
2 AN960-416 WASHER 2
3 4505053 1 STARTER MOTOR REWORKED 1
4 4063324 4 BUSH INNER STARTER 1
5 4372153 3 HOUSING STARTER MOTOR 1
6 PH0505N CAP SCREW 1/4 UNC X 1 3
7 4372253 4 CLUTCH HOUSING STARTER 1
8 PM6352N STARTER CLUTCH 1
9 4063224 3 BUSH OUTER - STARTER 1

Up to S/N 33A58

Section K- 1 -2
 Jabiru 3300 Engine

Section K- 2 -2
 Jabiru 3300 Engine

Section K: STARTER MOTOR

ITEM PART # ISS DESCRIPTION QTY

1 PM0109N BOSCH STARTER MOTOR 1

2 4776294 1 BOLT BOSCH STARTER MOTOR 2
3 4776394 1 CASE REWORKED STARTER MOTOR 1
4 4776494 1 STATOR MODIFIED 1
5 4063324 4 BUSH INNER 1
6 BEARING 6003-2RS 1
7 4776193 1 HOUSING BOSCH STARTER 1
8 PH0505N SOCKET HD SCREW 1 X ¼ UNC 3
9 PM6352N CLUTCH 1
10 4063224 3 BUSH OUTER - STARTER 1
11 4372253 1 CLUTCH HOUSING 1

From s/n 59 -509 uses Bosch Starter

From s/n 510 Nippon Denso type fitted
4A035A0D Nippon Denso Starter Complete without Clutch and Clutch Housing Assembly
4933023 Nippon Denso Starter Complete

Section K- 3 -1
 Jabiru 3300 Engine

From S/N 33A59

Section K- 4 -1
 Jabiru 3300 Engine

Section L: SUMP DIPSTICK & BREATHER

ITEM PART # ISS DESCRIPTION QTY

1 4550064 2 DIPSTICK ASSY 1

2 PG10042N ‘ O’RING BS114V 1
3 4585064 1 HOUSING ASSY 1
4 PH0636N GRUB SCREW 1/4 UNF X 1/4 1
5 4586064 2 MOUNT ADAPTOR 1
6 PG0148N ‘ O’RING BS116V 1
7 4635072 1 SUMP W/- PLENIUM UP TO S/N33A67 1
960409X 3 SUMP NO INDUCTION FROM S/N33A68 1

8 PH117434 SUMP PLUG 1

9 PI10172N TEMPERATURE SENDER 1

Section L- 1 -1
 Jabiru 3300 Engine

Section L- 2 -1
 Jabiru 3300 Engine

Section M: ROCKER LUBRICATION & VENTING

ITEM PART # ISS DESCRIPTION QTY

1 PG0127N O’RING BS011V 20

2 PH72624 CAP SCREW 4
3 4710084 1 ROCKER LUBE TUBE ASSY 4
4 4703084 1 COLLAR ROCKER LUBE 8
5 4686084 1 LUBE TUBE 8
6 PZ0059N HOSE CLAMP 12
WELSH PLUG 8mm (not illustrated) 4

Up to S/N 33A37

Section M- 1 -1
 Jabiru 3300 Engine

Section M- 2 -1
 Jabiru 3300 Engine

Section M: ROCKER LUBRICATION & VENTING

ITEM PART # ISS DESCRIPTION QTY

1 PG0127N O’RING BS011V 4

2 PH72624 CAP SCREW 4
3 4761094 1 ROCKER LUBE TUBE ASSY 4
4 4722094 1 MOULDED ‘T’ ROCKER LUBE 4
5 4686084 1 LUBE TUBE 30.5 LONG 8
6 PZ0059N HOSE CLAMP 12
WELSH PLUG 8mm (not illustrated) 4

From S/N 33A38

Section M- 3 -1
 Jabiru 3300 Engine

Section M- 4 -1
 Jabiru 3300 Engine

Section N: CARBURETTOR ASSEMBLY

ITEM PART # ISS DESCRIPTION QTY

1 PG0180N CARBURETTOR 40 Dia. 1

2 4116834 3 CABLE MOUNT 1
3 MS21042L3 HEX NUT 2
4 MS27039-1-12 MACHINE SCREW 2
5 PH0219N FLAT WASHER 1
6 PH0767N NUT 1
7 4783004 1 THROTTLE LEVER 1
8 4116634 1 CHOKE LEVER 1
9 AN960-10 WASHER 1
10 PH0757N C’SUNK SCREW 1
11 4691084 1 COUPLING CARBY 1

4774094 1 CARBY ADAPTOR (not illustrated) 1

4886014 1 CARBY ASSY

Section N- 1 -1
 Jabiru 3300 Engine

Section N- 2 -1
 Jabiru 3300 Engine

Section O: MISCELLANEOUS ELECTRICAL

ITEM PART # ISS DESCRIPTION QTY

PI10652N RECTIFIER/REGULATOR From S/N33A164 1

SINGLE PHASE
PI12609N RECTIFIER/REGULATOR Up to S/N33A163 1
3 PHASE
PI10662N CABLE STARTER 1
PI10672N COUPLING CRIMP 1
PI10682N CABLE FITTING 5/16 1
PI10692N STARTER RELAY 1
PI12497N SOLENOID 1

Section O- 1 -1
 Jabiru 3300 Engine

Section P: AIR COOLING DUCTS

ITEM PART # ISS DESCRIPTION QTY

1 4696083 1 COOLING DUCT R.S. 1
2 4695083 1 COOLING DUCT L.S. 1
3 4794004 1 AIR BAFFLE 4
4 RIVET 2
5 WASHER 2
6 4615074 1 SPRING ATTACH LUG 2
7 SPRING 2
8 WIRE LOOP ON BARREL AS REQD

Section P- 1 -1
 Jabiru 3300 Engine

Section P- 2 -1