Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0

OWNER Doc No.
:
TOSP-P038-EXE-DEC-6335-PIP-
MRI-0019
ETP Technology Vendor:
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND Revision : 0

COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT (N-OSBL)
FACILITY PROJECT FOR PENGERANG INTEGRATED COMPLEX Page : 1 of 11
PROJECT : PROVISION OF ENGINEERING,

PROCUREMENT, CONSTRUCTION AND
COMMISSIONING OF TITANIUM NBL
OUTSIDE BATTERY LIMIT (N-OSBL)
FACILITY PROJECT FOR PENGERANG
INTEGRATED COMPLEX
CLIENT : PRPC UTILITIES AND FACILITIES SDN

BHD
CONTRACT NO. : PRPC/TC1/001/2021
DOCUMENT : MATERIAL REQUISITION FOR

TITLE PIPE/FITTINGS AND FLANGES -
CHLORINATED POLY VINYL CHLORIDE
(PVC-C)PIPING FOR SCOPE 2
DOCUMENT : X
REVIEW CLASS
Issued as
0 24-06-22 VSP VB / BQ LLK
Final
Prepared Reviewed Approved Reviewed Endorsed Approved
Rev Date Description By By By by by by
CONTRACTOR OWNER
©[2021] PETROLIAM NASIONAL BERHAD (PETRONAS). All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted
in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.
Open
PIC TITANIUM OSBL PROJECT
COMMENTS RESPONSE SHEET (CRS)
.
Date: 25-Jan-22
CRS No: TOSP-P038-EXE-DEC-6335-PIP-MRI-0019_A-CRS
Rev No: A
Drawing / Document Number, Title and Revision: Transmittal Document Purpose:

Doc. No. TOSP-P038-EXE-DEC-6335-PIP-MRI-0019 Title: MATERIAL REQUISITION FOR PIPE / FITTINGS AND X CODE 2, ACCEPTED WITH COMMENTS
Rev. No. A FLANGES - CHLORINATED POLY VINYL CHLORIDE (PVC-C)
Transmittal No TOSP-P038-EXE-DEC-PRPCUF-TRM-0625 PIPING FOR SCOPE 2
No. Comments Confirmation / Explanation by Contractor

Somehow delivery of the material required is not indicated. where will this item be? does it jive with the Project
1 Noted & updated
Level 4 schedule?
PIP: This MR shall come with project specification on the requirement for packing, handling, shipping, technical
specification, additional requirement and etc. This MR also need to have project background and other
2 Noted & updated
introduction for Vendor understanding for supplying those materials. Kindly get Dialog to advice as per Scope 1
similar documents.
3 PIP : to attached as per latest MTO Noted & updated
Prepared by: Approved by:
Name: HAMDAN B SAID A Name: SHAHZULREZA B SAIFUL

Position: QUALITY Position: PIPING
Open
Hari Babu
From: Hudzaifah B Z Arifudin (GTS/PD&T) <hudzaifah.arifudin@petronas.com>

Sent: 24 June 2022 13:17
To: Vijaya Bhaskar B; Shahzulreza B Saiful (GTS/PD&T); M Ruzaidi Zaim B M Razali
(GTS/PD&T)
Cc: Hari Babu MG; Deepak Joseph R; Manoj Kumar R K; Karthikeyan S; Chua Hiang Wee;
Quek Yong Joo; Lee Lai Kin
Subject: RE: PRPC TITANIUM N-OSBL Project | Dialog 10P162 | Subject- Dialog-10P162-
NBL-ETP-MRI For CPVC Pipes, Fittings & Flanges _TOSP-P038-EXE-DEC-6335-PIP-
MRI-0019
Dear Mr. Vijaya,
One (1) minor comment as follow:
1
OWNER Doc No.:
TOSP-P038-EXE-DEC-6335-
EPCC OF TITANIUM NBL OUTSIDE PIP-MRI-0019
BATTERY LIMIT (N-OSBL) FACILITY
PROJECT FOR PENGERANG
INTEGRATED COMPLEX
MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

AND FLANGES - CHLORINATED POLY VINYL
CHLORIDE (PVC-C)PIPING FOR SCOPE 2 Page : 2 of 11
AMENDMENT LIST
REVISION
REV DESCRIPTION OF CHANGE
DATE
A 30-11-22 Issued for Review
0 24-06-22 Issued as Final
Open
OWNER Doc No.:
INTEGRATED COMPLEX

HOLD LIST
ID DESCRIPTION OWNER DISCIPLINE DOCUMENT SOURCE
Open
OWNER Doc No.:
INTEGRATED COMPLEX

TABLE OF CONTENT
1.0 PROJECT BACKGROUND ..................................................................................... 5

2.0 PURPOSE ......................................................................................................... 6
3.0 DEFINITION ..................................................................................................... 6
4.0 MATERIAL TO BE PURCHASED ............................................................................ 7
5.0 REFERENCE DOCUMENTS ................................................................................... 7
6.0 CODES AND STANDARDS ................................................................................... 7
7.0 EXEPTIONS TO PROJECT SPECIFICATIONS AND CODES ......................................... 8
8.0 SCOPE OF SUPPLY / WORK FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY
VINYL CHLORIDE (PVC-C) PIPING FOR SCOPE 2 ............................................................. 8
9.0 INSPECTION AND TESTING ................................................................................ 9
10.0 PACKING & PRESERVATION .............................................................................. 10
11.0 DELIVERY ....................................................................................................... 10
12.0 VENDOR DOCUMENT REQUIREMENT (FOR EVALUATION) ..................................... 11
13.0 ATTACHMENTS ............................................................................................... 11
ATTACHMENTS
Attachment - A Site Conditions
Attachment - B TOSP-P038-EXE-DEC-0001-PIP-DES-0001-Design Basis for Piping
Attachment - C TOSP-P038-EXE-DEC-0001-PIP-SPN-0001
Specification for Piping Materials
Attachment - D MTO of CPVC Pipes, Fittings & Flanges
Attachment - E PMRC Datasheet of CPVC Pipes
Attachment - F PMRC Datasheet of CPVC Fittings
Attachment - G PMRC Datasheet of CPVC Flanges
Attachment - H TOSP-P038-EXE-DEC-0001-PUR-PRC-0001
Shipping & Marking instruction procedure
Attachment - I Vendor Compliance Sheet
Open
OWNER Doc No.:
INTEGRATED COMPLEX

1.0 PROJECT BACKGROUND
PETRONAS Chemicals Group Berhad (PCGB) has embarked into a growth project
called “TITANIUM” by selectively diversifying portfolio into derivatives, specialty
chemicals and solutions to support the PCGSB’s vision in becoming the “Preferred
Chemicals Company providing innovative customer solutions”.
One of the project under the Titanium projects is the NUTMEG project which is to
build a 200ktPA Nitrile Butadiene latex (NBL) plant.
PRPC is the PIC park developer and will undertake the development of infrastructure,
offsite/utilities, interconnecting facility (OSBL) to support the Outside Battery Limit
scope required by Nitrile Butadiene Latex (NBL) Plant for operation. This OSBL
development is called N-OSBL project and the project was awarded to Dialog E&C
Sdn Bhd on 22nd July 2021.
Dialog E&C Sdn Bhd (CONTRACTOR) was awarded as an Engineering, Procurement,
Construction and Commissioning (EPCC) contractor for this project. This project
comprises of 2 main work scopes namely Scope 1: All Interconnecting Works To NBL
Plant and Scope 2: New Effluent Treatment Plant Unit 6335
Scope 1:
All interconnecting works
1. Offsite facility – Flare pipeline from NBL battery limit to existing Petchem flare
tie-in provision.
2. Utilities Supply Piping Network.
3. Feedstock Pipeline – Butadiene Line from Cracker Tank Farm and Acrylonitrile
Line from Pengerang Deepwater Terminal (PDT2)
4. Effluent Pipeline – Process wastewater, ACC Line and Utility Effluent Line.
5. Electrical power system
6. Instrument & Telecom system
7. Fire Water Line to NBL Plant
8. New pipe rack extension (same size and dimension) from the existing pipe
rack area 3900 to the new NBL plant.
Scope 2:
Development of new ETP. The process treatment consist as follows as a minimum:
1. Pre-Collection
2. FEED Tank & Off spec Tank
3. Cooler and 1st Stage Biological Treatment
4. Chemical Oxidation System
5. Stripping / Scrubbing
6. 2nd Stage Biological System
7. Filtration
8. Vapor Recovery Treatment
9. Sludge Treatment System
10. Associate facility (i.e. piping, structure, instrument, electrical, etc.) to support
the operation of this new ETP (Unit 6335).
Open
OWNER Doc No.:
INTEGRATED COMPLEX

2.0 PURPOSE
This document contains the Material Requisition of PIPE/FITTINGS AND FLANGES -

CHLORINATED POLY VINYL CHLORIDE (PVC-C) PIPING FOR SCOPE 2
3.0 DEFINITION
OWNER : PRPC UTILITIES AND FACILITIES SDN BHD (PRPCUF)

CONTRACTOR : DIALOG E&C SDN BHD (DECSB)
PROJECT/ WORK : ENGINEERING, PROCUREMENT, CONSTRUCTION AND
COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT
(N-OSBL) FACILITY PROJECT FOR PENGERANG INTEGRATED
COMPLEX
PACKAGE WORK : The works, services or supplies, or any or all of the foregoing,
to be undertaken by a PACKAGE CONTRACTOR or PACKAGE
VENDOR, as applicable
"SCOPE OF WORK" may also be used instead of "PACKAGE
WORK" to facilitate the understanding of all the parties.
PACKAGE : Each package of works or supplies forming part or parts of the
PROJECT
PACKAGE VENDOR : Any Vendor engaged by OWNER/CONTRACTOR to supply
Equipment and Materials or Spare Parts, which may include
associated services.
SCOPE 1 : All Interconnecting Works to NBL Plant
SCOPE 2 : New Effluent Treatment Plant Unit 6335
SHALL : The word “shall” is to be understood to be mandatory.
SHOULD : The word “should” is to be understood as strongly

recommended.
Open
OWNER Doc No.:
INTEGRATED COMPLEX

4.0 MATERIAL TO BE PURCHASED
VENDOR is hereby invited to submit a PROPOSAL for Supply, Testing, Inspection and
Delivery of Pipe/Fittings and Flanges-PVC-C for Scope 2 in accordance with this
Material Requisition.
The following items shall be furnished in accordance with the requirements specified in
this requisition, all attached technical specification (reference documents) and all
applicable International Standards and local rules.
In general, this Material Requisition is for Pipe/Fittings and Flanges – (PVC-C) for
Scope 2
5.0 REFERENCE DOCUMENTS

This document uses the following abbreviations and definitions:
a) TOSP-P038-EXE-DEC-0001-PIP-DES-0001 Design Basis for Piping
b) TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials
6.0 CODES AND STANDARDS
All the Pipe/Fittings and Flanges supplied as part of this Material Requisition shall be
designed, manufactured and tested in accordance with the relevant sections of the
latest National / International Codes, Standards and Local Law and Regulations unless
otherwise agreed.
Codes & Standards shall as follows as per Piping Material Specification:

Pipes:
ASTM F441 / F441M - Standard Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Pipe, Schedules 40 and 80
ASTM D1784 - Standard Classification System and Basis for Specification for Rigid
Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)
Compounds
Ball Valves:
ISO 16135 - Industrial valves — Ball valves of thermoplastics materials
Ball Check Valves:
ISO 16137 - Industrial valves — Check valves of thermoplastics materials
Flanges & Fittings:

ASTM F439: Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 80
ASME B16.21: Non-metallic Flat Gaskets for Pipe Flanges
ASME B16.5: Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24, Metric/Inch
Standard
ASME-B18.2.1: Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex,
Hex Flange, Lobed Head, and Lag Screws (Inch Series)
ASME-B18.2.2 Nuts for General Applications: Machine Screw Nuts; and Hex, Square,
Hex Flange, and Coupling Nuts (Inch Series)
Open
OWNER Doc No.:
INTEGRATED COMPLEX

Unless otherwise specified, the latest applicable revision of codes and standards shall
be considered.
It shall be the VENDOR’s responsibility to be aware of the specified Codes and

Standards and requirements of local authorities and applicable regulations and laws.
7.0 EXEPTIONS TO PROJECT SPECIFICATIONS AND CODES
It shall be VENDOR’s responsibility to be aware of the specified Standards and Codes

and requirements of local authorities and applicable regulation and laws.
VENDOR shall clearly declare the offered materials are in full compliance with this
material requisition OR specify in the Technical Proposal of all the relevant exceptions
and deviations.
Excluding the deviations and exceptions listed in VENDOR’s Technical Proposal and
expressively approved by Purchaser, the supply will be considered fully compliant with
purchaser’s requirements.
All deviations and exceptions which will be notified by VENDOR after PO issue will not
be accepted and VENDOR will not be allowed to charge for any extra cost necessary to
reach full compliance to purchaser’s requirements.
8.0 SCOPE OF SUPPLY / WORK FOR PIPE/FITTINGS AND FLANGES -

CHLORINATED POLY VINYL CHLORIDE (PVC-C) PIPING FOR SCOPE 2
The scope of supplies for Pipe/Fittings and Flanges – (PVC-C) for Scope 2 Shall be as
per Attachment D - MTO of CPVC Pipes, Fittings & Flanges included, but not limited
to that list.
 VENDOR shall supply and assume full responsibility with the performance and
quality of material.
 The material supplied shall be strictly in accordance with the latest Codes and
Standards mentioned in this Material Requisition. This specification is for
Pipe/Fittings and Flanges (CPVC) for Scope 2 as detailed in subsequent clauses
shall supplement the Codes and other project specifications.
 All item shall be supplied in accordance with the dimension as stated in

Purchase Requisition. The product dimension in which is out of the specified
tolerance shall not be accepted.
 To provide packaging, handling, loading, transportation to site and to be

responsible until arriving to site as per stipulated in the ITB. The VENDOR shall
be fully considering the conditions of transportation from the shipping port to
job site.
Open
OWNER Doc No.:
INTEGRATED COMPLEX

 All material shall be provided with such rust preventive measured or coatings
to ensure that no rust may develop on their internal or external surface of any
parts.
 VENDOR shall be deemed to have examined fully, understood and considered

the contents of all documents issued as part of this requisition prior to
preparation of its Proposal.
 To present all the identified certificates including material and design

verification and compliance.
 VENDOR shall complete and revert back the Pipe/Fittings & Flanges (CPVC) for
Scope 2 datasheet on the column marked “Offer” for each type of Pipe/Fittings
and Flanges ((CPVC) for Scope 2 stipulated, together with vendor proposal.
 VENDOR is required to present manufacturer’s QMS, sample of product

certificates and sample of ITP along with VENDOR’s proposal for evaluation.
 It shall be the sole responsibility of VENDOR to notify Purchaser of any

discrepancies in the RFQ and to obtain interpretation and/or clarification on
any questions that may arise as of the intent of the RFQ.
9.0 INSPECTION AND TESTING
VENDOR is responsibility to comply with complete inspection, QAQC and testing

requirements as defined in the specification along with all supporting documentation. All
item shall be inspected and tested in accordance with the relevant product standard and
as stated in the Purchase Requisition.
 All item shall be inspected and tested in accordance with the relevant product
standard and as stated in the RFQ.
 All welds requiring repairs shall be tested / inspected in accordance with the
code of manufacture and relevant ASTM Standard. Ultrasonic Examination in
lieu of radiography is not allowed.
 Examinations and/or tests may be reviewed and/or witnessed by Purchaser or

their authorized third party inspector at the manufacturer/VENDOR’s facility.
The VENDOR is responsible for informing the Purchaser about the availability of
goods for inspection and testing.
 Inspection shall be performed as per “Vendor Quality Requirement form”

attached with the RFQ.
 The manufacturer shall submit the certificate of conformity of the material duly
certified by inspector. For VENDOR is required to furnish along with
Open
OWNER Doc No.:
INTEGRATED COMPLEX

“Manufacturer’s Certificate” of each material with the correct Heat Number

during delivery to site.
 VENDOR shall identify or isolate nonconforming products from acceptable ones,

and preventive action to prevent nonconforming materials form being used or
delivered by mistake.
 DIALOG’s QC Inspectors will conduct visual inspections on the delivered

material within two weeks calendar day provided the Manufacturer’s
Certificates are presented on time and will highlight back to VENDOR on the
findings if any.
 VENDOR shall be claimed to be responsible for the internal cleanliness of the

Pipe/Fittings and Flanges (CPVC) for Scope 2 (eg. No lacquer to be applied at
the internal, dust / rain water shall not be contain in the internal surface)
 VENDOR to inform Purchaser upon completion of necessary test including the

Factory Acceptance Testing and other services for inspection and prior to
delivery to site with Re testing at Site for the validation of Calibration
Certificate.
10.0 PACKING & PRESERVATION
Material shall be packed ready for transportation in a manner which allows easy
handling and presents damage. Vendor shall submit their standard packing procedure
to Purchaser for approval.
All Pipe/Fittings and Flanges (CPVC) ends shall be protected with heavy-duty plastic
end caps or other long lasting covers.
The vendor needs to supply a storage and handling requirements of Pipe/Fittings and
Flanges (CPVC) to DIALOG for review.
Packing and preservation shall be referred to Attachment H for Project Shipping &
Marking instruction procedure for detail.
11.0 DELIVERY
Referring to Project Level 3 Schedule, the required date of delivery to site for the All
Pipe/Fittings and Flanges (C-PVC) shall be latest by last week of July 2022.
Deliveries shall be made to DIALOG Pengerang Warehouse, Sungai Buntu, and Lot
964 between the hours of 8:00am to 4:00pm on any normal working day.
Without limiting any other rights or obligations of the parties hereunder, if the
VENDOR will be unable to deliver the goods by the delivery date(s) stipulated in the
Purchase Order, the VENDOR shall (i) immediately consult with DIALOG to determine
the most expeditious means for delivering the goods and (ii) use an expedited means
Open
OWNER Doc No.:
INTEGRATED COMPLEX

of delivery at VENDOR’s cost (unless the delay is due to Force Majeure), if

reasonably so requested by DIALOG.
12.0 VENDOR DOCUMENT REQUIREMENT (FOR EVALUATION)
VENDOR shall provide the necessary documentation as listed below for evaluation:
 QMS
 Sample Manufacturer’s Certificate
 Sample ITP (Inspection Test Plan)
 Paint Product Data Sheet
 Relevant procedures
 Deviation List
 Material Datasheet / Test Certificate
 Product Qualification Test Report / Certificate
13.0 ATTACHMENTS
ATTACHMENTS
Attachment - A Site Conditions
Attachment – B TOSP-P038-EXE-DEC-0001-PIP-DES-0001-Design Basis for Piping
Attachment – C TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials
Attachment – D MTO of CPVC Pipes, Fittings & Flanges
Attachment – E PMRC Datasheet of CPVC Pipes
Attachment – F PMRC Datasheet of CPVC Fittings
Attachment – G PMRC Datasheet of CPVC Flanges
Attachment - H TOSP-P038-EXE-DEC-0001-PUR-PRC-0001 Shipping & Marking instruction procedure
Attachment – I Vendor Compliance Sheet
Open
ATTACHMENT A
SITE CONDITIONS
PROJECT TITLE P_NOSBL
PROJECT SUB-TITLE EFFLUENT TREATMENT PLANT
OWNER Doc No. :

TOSP-P038-EXE-DEC-6335-PIP-MRI-0019
PROJECT SPECIFICATION - SITE CONDITIONS
1 Project Name P_NOSBL

2 Project Location South Eastern part of Peninsular Malaysia. Johor State, Pengerang area
3 Project Co-ordination (global) 1o22' N 104o07'E
4 Site Elevation +2.08 M - AMSL
5 Soil Property
5.1 Max. Soil Temp 30 o
C
5.2 Thermal resistivity 1.2 K.m/W
5.3 Resistivity in trench 200 Ohm.m
6 Average Rain Fall 2200 mm
7 Design wind velocities 32.5 m/s
8 General Air Temperature for Design Purpose
8.1 Maximum Dry Bulb 36.5 o
C
8.2 Maximum Wet Bulb 30 o
C
8.3 Minimum temp 20 o
C
9 Design operating temperature (hourly intervals)

9.1 Maximum 35°C @ RH 70%.
9.2 Minimum 21°C @ RH 100%.
10 Solar Radiation 1369 W/m2

Design temperature for a
10.1 75 o
C
surface exposed to direct
11 Design temperature for HVAC Design
11.1 Maximum 32°C @ RH 80%.
12 Barometric Pressure
12.1 Design 1.010 bar.a
13 Electrical Power supply
13.1 Main Power incoming 275 KV 3phase 50 Hz
13.2 HV Distribution 33 KV 3phase 50 Hz
13.3 Motors >1000KW 11 KV 3phase 50 Hz
13.4 110KW to 1000KW 3.3 KV 3phase 50 Hz
13.5 Motors<=100KW 400 V 3phase 50 Hz
13.6 L.V. Distribution power 400 V 3phase 50 Hz
13.7 Lighting/panel heater 230 V 3phase 50 Hz
13.8 Instrument Power 400/230 V 3/1phase 50 Hz
13.9 Control voltage 110 V DC
14 Fire Water
14.1 Min.Pressure 10 barg
14.2 Max. Pressure 14.6 barg
14.3 Design Pressure 18.4 barg
14.4 Water Temp. Min 25 o
C
14.5 Water Temp. Max. 35 o
C
14.6 Water Temp. Design 75 o
C
15 Utility Available
15.1 Instrument Air 6 barg
15.2 Plant Air 6 barg
15.3 Potable water 2 barg
15.4 Service water 2 barg
16 Ambient condition : Aerid, close to sea; corrosive
ATTACHMENT B
TOSP-P038-EXE-DEC-0001-PIP-DES-0001
(Design Basis for Piping)
OWNER Doc No. :
DES-0001
Revision : 0
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND

COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT (N-OSBL) Page : 1 of 21
FACILITY PROJECT FOR PENGERANG INTEGRATED COMPLEX

INTEGRATED COMPLEX

BHD
DOCUMENT : DESIGN BASIS FOR PIPING

TITLE
DOCUMENT : Z
REVIEW CLASS
Issued as LKE/CHW/
0 24-12-21 SMH LLK
Final BQ HZA MRZ MAAR
SS
Prepared Reviewed Approved Reviewed Endorsed Approved
CONTRACTOR OWNER
©[2021] PETROLIAM NASIONAL BERHAD (PETRONAS). All rights reserved. No part of this document may be reproduced, stored in a retrieval system or
transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.
Open
.
Date: 29‐Nov‐21
CRS No: TOSP‐P038‐EXE‐DEC‐0001‐PIP‐DES‐0001_C‐CRS
Rev No: C
Doc. No. TOSP‐P038‐EXE‐DEC‐0001‐PIP‐DES‐0001 Title: DESIGN BASIS FOR PIPING X CODE 2, ACCEPTED WITH COMMENTS
Rev. No. C
Transmittal No TOSP‐P038‐EXE‐DEC‐PRPCUF‐TRM‐0322
1 PIP: Typo ‐ "MCF" Amended
2 PIP: Sec 11.8 (Para 2) ‐ To include GRVE reference as well. Reference to GRVE and GRUP has been included
PIP: Previously commented (refer CRS no. 18) ‐ Special pipe support here referring to Spring support, Rigid strut, Related documents and documents number has been
3
Snubber and etc. Kindly put reference to project document on the special support requirement. added
PIP: Sec 14 (Last Para) ‐ Any additional support standard issued by CONTRACTOR to be updated in the respective
4 Added
documents stated. The new standard support to be verified by Structure thru calculation and etc.
Open
.
Date: 29‐Nov‐21
CRS No: TOSP‐P038‐EXE‐DEC‐0001‐PIP‐DES‐0001_C‐CRS
Rev No: C
Doc. No. TOSP‐P038‐EXE‐DEC‐0001‐PIP‐DES‐0001 Title: DESIGN BASIS FOR PIPING X CODE 2, ACCEPTED WITH COMMENTS
Rev. No. C
Transmittal No TOSP‐P038‐EXE‐DEC‐PRPCUF‐TRM‐0322
PIP: MCF List ‐ To include similar table for PTS 12.32.01. Even though the list is not applicable for piping, kindly
5 put N/A in the table and put note that specify that the list is not applicable for Piping since design and selection Added
will be done by Instrument and Mechanical Static.
Name: SHAHZULREZA B SAIFUL Name: SHAHZULREZA B SAIFUL

Position: PIPING Position: PIPING
Open
Hasnatul Fatimah Binti Ishak
From: Chua Hiang Wee

Sent: Thursday, December 30, 2021 17:52
To: Nor Ahjelita Binti Samuri
Subject: FW: JB0404<NOSBL> Design Basis for Piping issuance to Rev.0
Dear Ahjelita,
FYI.
Regards,
Chua HW
From: Hudzaifah B Z Arifudin (GTS/PD&T) <hudzaifah.arifudin@petronas.com>
Sent: Friday, 24 December, 2021 5:47 PM
To: Syeikh Muhammad Hajidi Shaikh Harun <sm.hajidi@toyo‐eng.com>; M Ruzaidi Zaim B M Razali (GTS/PD&T)
<ruzaidi.razali@petronas.com>
Cc: Shahzulreza B Saiful (GTS/PD&T) <shahzulreza_saiful@petronas.com>; Aiman Mustaqim Mohd Suhaimi
<aiman.mustaqim@toyo‐eng.com>; Chua Hiang Wee <hiangwee.chua@dialogasia.com>; Quek Yong Joo
<brandonquek@dialogasia.com>
Subject: Re: JB0404<NOSBL> Design Basis for Piping issuance to Rev.0
ALERT ‐ Please be aware that this email originated from outside of Dialog Group. Do not click on links or open
attachments unless you recognize the sender and know the contents are safe. If you are unsure, please forward the
email to IT Support (itsupport@dialogasia.com) for investigation.
Dear Hajidi san,
Please proceed accordingly.
Thank you.
Regards,
Hudzaifah
Get Outlook for Android
From: Syeikh Muhammad Hajidi Shaikh Harun <sm.hajidi@toyo‐eng.com>
Sent: Thursday, December 23, 2021 7:43:59 PM
To: Hudzaifah B Z Arifudin (GTS/PD&T) <hudzaifah.arifudin@petronas.com.my>; M Ruzaidi Zaim B M Razali
(GTS/PD&T) <ruzaidi.razali@petronas.com.my>
Cc: Shahzulreza B Saiful (GTS/PD&T) <shahzulreza_saiful@petronas.com.my>; Aiman Mustaqim Mohd Suhaimi
<aiman.mustaqim@toyo‐eng.com>; hiangwee.chua@dialogasia.com <hiangwee.chua@dialogasia.com>; Quek Yong
Joo <brandonquek@dialogasia.com>
Subject: RE: JB0404<NOSBL> Design Basis for Piping issuance to Rev.0
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize
the sender and know the content is safe.
Dear Hudzaifah san,

Thank you for the feedback. Please find updated version as attached.
1
Updated comments are highlighted in yellow for your ease of review.

Please let us know if we can proceed with Rev.0 issuance.

Best regards,
Hajidi

From: Hudzaifah B Z Arifudin (GTS/PD&T) [mailto:hudzaifah.arifudin@petronas.com]
Sent: Thursday, 23 December, 2021 5:45 PM
To: Syeikh Muhammad Hajidi Shaikh Harun <sm.hajidi@toyo‐eng.com>; M Ruzaidi Zaim B M Razali (GTS/PD&T)
<ruzaidi.razali@petronas.com>
Cc: Shahzulreza B Saiful (GTS/PD&T) <shahzulreza_saiful@petronas.com>; Aiman Mustaqim Mohd Suhaimi
<aiman.mustaqim@toyo‐eng.com>; hiangwee.chua@dialogasia.com; Quek Yong Joo
Subject: RE: JB0404<NOSBL> Design Basis for Piping issuance to Rev.0
Dear Hajidi san,
Please find the attached for my comment.
Thank you.
Regards,
Hudzaifah Z.Arifudin
Piping Engineer
Mechanical Department
Group Technical Solutions (GTS)
Project Delivery & Technology (PD&T)
From: Syeikh Muhammad Hajidi Shaikh Harun <sm.hajidi@toyo‐eng.com>
Sent: Wednesday, December 22, 2021 6:36 PM
To: Hudzaifah B Z Arifudin (GTS/PD&T) <hudzaifah.arifudin@petronas.com.my>; M Ruzaidi Zaim B M Razali
(GTS/PD&T) <ruzaidi.razali@petronas.com.my>
Cc: Shahzulreza B Saiful (GTS/PD&T) <shahzulreza_saiful@petronas.com.my>; Aiman Mustaqim Mohd Suhaimi
<aiman.mustaqim@toyo‐eng.com>; hiangwee.chua@dialogasia.com; Quek Yong Joo
Subject: JB0404<NOSBL> Design Basis for Piping issuance to Rev.0
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize
the sender and know the content is safe.
Dear Mr. Hudzaifah, Mr. Ruzaidi,
Please find attached TOSP‐P038‐EXE‐DEC‐0001‐PIP‐DES‐0001 – Design Basis for Piping for your review.
We have received IFA CODE 2 return on this documents, and would like to proceed with Rev.0 issuance, with your
agreement.
Revision triangle is kept in the documents for your ease of review, and shall be removed in the official issuance.
Please let us know if you have any comments. Thank you.
Best regards,
2
OWNER Doc No. :
EPCC OF TITANIUM NBL OUTSIDE TOSP-P038-EXE-DEC-0001-
BATTERY LIMIT (N-OSBL) FACILITY PIP-DES-0001
PROJECT FOR PENGERANG Revision : 0
INTEGRATED COMPLEX
DESIGN BASIS FOR PIPING Page : 2 of 21
AMENDMENT LIST
REV REVISION DESCRIPTION OF CHANGE

DATE
B 17-09-21 Re-Issued for Review
C 02-11-21 Issued for Approval
Open
OWNER Doc No. :
INTEGRATED COMPLEX
HOLD LIST
OWNER
ID DESCRIPTION DOCUMENT SOURCE / REMARKS
DISCIPLINE
Open
OWNER Doc No. :
INTEGRATED COMPLEX
TABLE OF CONTENT
ORDER OF PRECEDENCE ....................................................................... 10
PETRONAS TECHNICAL STANDARD (PTS) ............................................. 10
PETRONAS STANDRAD DRAWINGS ....................................................... 11
INTERNATIONAL CODES AND STANDARDS ........................................... 12
GENERAL .............................................................................................. 15
DESIGN LIFE......................................................................................... 15
PIPES ................................................................................................... 16
FLANGES............................................................................................... 17
FITTINGS.............................................................................................. 17
VALVES................................................................................................. 17
BOLTS AND NUTS.................................................................................. 17
GASKET ................................................................................................ 17
INSULATION ......................................................................................... 18
NON-METALLIC PIPING ........................................................................ 18
11.9 PIPE BEND............................................................................................ 18
Open
OWNER Doc No. :
INTEGRATED COMPLEX
ATTACHMENT 1 APPLICABLE MCF REQUIREMENTS
Open
OWNER Doc No. :
INTEGRATED COMPLEX
PROJECT BACKGROUND
PETRONAS Chemicals Group Berhad (PCGB) has embarked into a growth project called
TITANIUM by selectively diversifying portfolio into derivatives, specialty chemicals
and solutions to support the PCGSBs vision in becoming the Preferred Chemicals
Company providing innovative customer solutions.
One of the project under the Titanium projects is the NUTMEG project which is to build
a 200ktPA Nitrile Butadiene latex (NBL) plant.
development is called N-OSBL project and the project was awarded to Dialog E&C Sdn
Bhd on 22nd. July 2021.
Scope 1:
1. Offsite facility Flare pipeline from NBL battery limit to existing Petchem flare
tie-in provision.
3. Feedstock Pipeline Butadiene Line from Cracker Tank Farm and Acrylonitrile
4. Effluent Pipeline Process wastewater, ACC Line and Utility Effluent Line.
8. New piperack extension (same size and dimension) from the existing piperack
area 3900 to the new NBL plant.
Scope 2:
1. Pre-Collection
7. Filtration
Open
OWNER Doc No. :
INTEGRATED COMPLEX
PURPOSE
This document covers the outline of the minimum requirements for piping design and
the specifications for scope of works in SCOPE 1 and SCOPE 2 to be used for the PIC
TITANIUM OSBL PROJECT.
DEFINITION

COMPLEX
PROJECT
SHALL : The word shall is to be understood to be mandatory.
SHOULD : The word should is to be understood as strongly

recommended.
PROJECT REFERENCES
RAPID-P0014-OUI-ENG-PRC-0001-6031 Project Procedure Units of

Measurement
Open
OWNER Doc No. :
INTEGRATED COMPLEX
RAPID-P0014-OUI-MEC-DES-0001-9001 Project Specification Acoustic

Insulation for Piping
RAPID-P0014-OUI-MEC-DES-0001-9002 Project Specification Thermal
Insulation
RAPID-P0014-OUI-MEC-SPN-0001-0103 Project Specification Metallic Material
Selected Standards
RAPID-P0014-OUI-MCI-SPN-0001-0003 Project Specification Non-metallic
Materials Selection and Application
RAPID-P0014-OUI-MEC-SPN-0001-9006 Project Specification Metallic
Materials Prevention of Brittle Facture
RAPID-P0014-OUI-MEC-DES-0001-9010 Project Specification Cathodic
Protection
RAPID-P0014-OUI-PIP-SPN-0001-9001 Project Specification Human Factors
Engineering - Valve Analysis
RAPID-P0014-OUI-PIP-SPN-0001-9008 Project Specification Shop and Field
Fabrication of Piping
RAPID-P0014-OUI-PIP-DES-0001-9013 Project Specification Piping Classes -
Basic of Design
RAPID-P0014-OUI-PIP-SPN-0001-9014 Project Specification Piping General
Requirements
RAPID-P0014-OUI-PIP-DES-0001-9015 Project Specification Piping Classes
Refining and Chemicals
RAPID-P0014-OUI-PIP-DES-0001-9023 Project Specification GRP Pipelines
and Piping Systems
RAPID-P0014-OUI-PRO-DES-0001-0019 Project Specification Design of
Pressure Relief, Flare and Vent
Systems
RAPID-P0014-OUI-PRO-DES-0001-0041 Project Specification Definition of
Temperature, Pressure and Toxicity
Levels
TOSP-P038-EXE-DEC-0001-MCI-SPN-0001 Specification for Painting and Coating
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials
TOSP-P038-EXE-DEC-0001-PIP-SPN-0002 Specification for Piping Layout and
installation
TOSP-P038-EXE-DEC-0001-PIP-SPN-0003 Specification for Manual Valves
TOSP-P038-EXE-DEC-0001-PIP-SPN-0005 Specification for Stress Analysis
TOSP-P038-EXE-DEC-0001-PIP-SPN-0006 Specification for Piping Steam Tracing
TOSP-P038-EXE-DEC-0001-PIP-SPN-0008 Specification for Pipe Supports
TOSP-P038-EXE-DEC-0001-PIP-SPN-0009 Specification for Hot Insulation
TOSP-P038-EXE-DEC-0001-PIP-SPN-0010 Specification for Cold Insulation
TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Specification for Piping Construction
Standard
TOSP-P038-EXE-DEC-0001-PIP-SPN-0013 Specification for Piping Design Standard
TOSP-P038-EXE-DEC-0001-PIP-SPN-0014 Specification for Protective Steam

Heating of Piping System
TOSP-P038-EXE-DEC-0001-PIP-SPN-0015 Specification for Plant Model
Construction and Review
TOSP-P038-EXE-DEC-0001-PIP-SPN-0016 Specification for Glass-Fibre Reinforced
Plastic Pipeline and Piping System
Open
OWNER Doc No. :
INTEGRATED COMPLEX
TOSP-P038-EXE-DEC-0001-PIP-SPN-0018 Specification for Spring Supports and

Rod Hangers
TOSP-P038-EXE-DEC-0001-PIP-SPN-0019 Specification for Sliding Plates
TOSP-P038-EXE-DEC-0001-PIP-SPN-0020 Specification for Rigid Struts
TOSP-P038-EXE-DEC-0001-PIP-SPN-0021 Specification for Piping Speciality Item
TOSP-P038-EXE-DEC-0001-PIP-SPN-0026 Specification for Shop and Filed
Fabrication of Piping
TOSP-P038-EXE-DEC-3900-PIP-DWG-0004 Piping Tie In Location Plan for Scope 1
TOSP-P038-EXE-DEC-3900-PIP-DWG-0005 Pipe Support Standard Drawings for
Scope 1
TOSP-P038-EXE-DEC-6335-PIP-DWG-0002 Piping Tie In Location Plan for Scope 2
TOSP-P038-EXE-DEC-6335-PIP-DWG-0005 Pipe Support Standard Drawings For
Scope 2
ABBREVIATIONS
The acronyms and abbreviations used in this document have the meanings as defined
below:
AFC Approved For Construction

AIV Acoustic induced vibration
API American Petroleum Institute
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
AOC Accidentally oil contaminated
BS British Standards
CDBM Corrosion Design Basis Memorandum
CINI Committee Industrial Insulation
DN Nominal Diameter in millimeters
EJMA Expansion Joint Manufacturer Association
EN European Norm/Standard
FIV Frequency induced vibration
GRE Glass-fibre Reinforced Epoxy
GRP Glass-fibre Reinforced Plastic
GRUP Glass-fibre Reinforced Unsaturated Polyester
GRVE Glass-fibre Reinforced Vinyl Ester
ISBL Inside Battery Limit
LSD Land Survey Datum
MAR Mandatory Additional Requirement
MSS Manufacturers Standardization Society
NACE National Association of Corrosion Engineers
NDT Non-Destructive Testing
NPS Nominal Pipe Size
NPT National Pipe thread
OSBL Outside Battery Limit
P&ID Piping & Instrumentation Diagram
PMT Project Management Team
PMRC PETRONAS Material Reference Codes
PTO Integrated Project Team of PTSSB and PRPC
PTS PETRONAS Technical Standards
Open
OWNER Doc No. :
INTEGRATED COMPLEX
PWHT Post-weld Heat Treatment

RAPID Refinery and petrochemicals Integrated Development
SI Système International
3D CAD Tri-dimensional Computer Aided Design
UNITS OF MEASUREMENT
The units of measurement to be used are detailed in Project Procedure RAPID-P0014-

OUI-ENG-PRC-0001-6031
Units of Measurement with the exceptions stated below:
Flange Ratings: Stated class 150, 300, 600, 900, 1500, 2500
Pipe Threads: Stated in imperial, for example 1" NPT (National Pipe Thread)
Pipe diameter shall be in mm (DN = Nominal Diameter)
As stated in the procedure, SI units have to be applied.
CODES AND STANDARDS
This section identifies the latest editions of applicable codes and standards to be used
for this project. As a minimum, piping shall be designed in accordance with accepted
design practices, applicable sections of the latest PETRONAS Technical Standards, the
relevant section of the latest national/international codes, standards and regulations
as listed below.
ORDER OF PRECEDENCE
In case of conflict between Laws, Project Specifications and Codes & Standards, the
following order of precedence shall be considered:
1. Malaysian laws and applicable regulatory requirements,

2. Project Specifications and supplemented PTS
3. Applicable Malaysian Codes and Standards,
4. Applicable International Codes and Standards.
If a lower level requirement is more stringent than an upper one in the above
documents, a request shall be raised to OWNER for written decision before proceeding
with the design, manufacture or construction.
PETRONAS TECHNICAL STANDARD (PTS)
PTS 30.00.60.13 (May 2004)  Human Factors Engineering - Valve Analysis

PTS 30.10.02.11 (Dec 2010)  Metallic Materials Selected Standards
PTS 30.10.02.13 (Oct 2009)  Non-Metallic Materials Selection & Application
Open
OWNER Doc No. :
INTEGRATED COMPLEX
PTS 30.10.02.31 (Oct 2009)  Metallic Materials Prevention of Brittle Fracture

PTS 30.10.05.11 (Jan 2008)  Plant Model Construction and Review
PTS 30.10.60.18 (Oct 2011)  Welding of Metals (Amendments / Supplements to
API RP 582)
PTS 30.10.73.10 (Nov 2003)  Cathodic Protection
PTS 30.46.00.31 (Dec 2010)  Thermal Insulation (Amendments/Supplements to
the CINI Handbook)
PTS 15.20.03 (Jun 2019)  Protective Coatings & Linings
PTS 31.01.10.10 (Jan 2010)  Chemical Injection Facilities
PTS 31.10.03.10 (Oct 2011)  Symbols and Identification System - Mechanical
PTS 31.38.01.10 (Aug 2011)  Piping Classes - Basic of Design
PTS 31.38.01.11 (Oct 2011)  Piping - General Requirements
PTS 31.38.01.12 (Oct 2011)  Piping Classes Refining and Chemicals
PTS 31.38.01.29 (Aug 2009)  Pipe Supports
PTS 31.38.01.31 (Dec 2010)  Shop and Field Fabrication of Piping
PTS 31.38.01.84 (Feb 2010)  Piping Classes Services and Materials Selection
Index
PTS 31.38.30.11 (Dec 2010)  Protective Steam Heating of Piping System
PTS 31.40.10.19 (Jul 2010)  Glass-Fibre Reinforced Plastic Pipeline and Piping
Systems
PTS 31.40.10.20 (Dec 2009)  Spoolable Fibre-Reinforced Plastic Pipes
PTS 32.37.10.11 (Nov 2009)  Installation of On-line Instruments
PTS 71.00.08.30 (Sep 2009)  Radiographic Testing
PTS 71.00.08.31 (Jan 2009)  Ultrasonic Examinations
PTS 80.00.10.11 (Oct 2011)  Layout of Onshore Facilities
PTS 80.36.00.30 (Sep 2009)  Relief Valve Selection, Sizing, Specification,
Inspection and Testing
PTS 80.45.10.10 (Feb 2010)  Relief Valve Selection, Sizing, Specification,
Inspection and Testing
PTS 80.46.30.11 (Feb 2010)  Interlocking System for Safety/Relief Valves
PTS 80.47.10.32 (Jan 2009)  Active Fire Protection System and Equipment for
Onshore Facilities
PETRONAS STANDRAD DRAWINGS
S12.002  Bund wall typical details

S32.102  Square edge flow metering orifice plates for ANSI: ASME
B16.36 raised face orifice flanges
S38.011  Spectacle blinds for ASME flanges
S38.041  Temporary strainer for compressors
S38.042  Spade blinds for ASME flanges
Open
OWNER Doc No. :
INTEGRATED COMPLEX
S38.043  Spacer for ASME flanges, for replacement of spades

S38.090  Branch fittings
S38.130  Orifice flanges, raised face, with flange tappings. ASME
classes 300 to 2500 incl., Nom. size DN 50 to DN 600 incl.
S38.131  Orifice flanges, raised face, with corner tappings. ASME
classes 300 and 600, Nom. size DN 50 to DN 600 incl.
S38.132  Orifice meter runs with Flanged Tappings ANSI class 300 to
2500 incl., Nom. Size DN 50 to DN 300 incl.
S38.134  Orifice meter runs with flanged ends, Nom. size DN 15 to DN
40 incl., ASME classes 150 to 1500 incl.
S38.141  Steam ring to horizontal flanges of DN 150 and above in
hydrogen service
S38.142  Two steam rings to horizontal flange of DN 150 and above (with
spectacle blind, spade, spacer or orifice).
S38.143  Steam ring to vertical flange of DN 150 and above in
hydrogen service
S38.144  Two steam rings to vertical flange of DN 150 and above in
hydrogen service (with spectacle blind, spade or spacer)
S44.030  Typical bracings for small bore branches of piping (e.g.
drain/vent point)
orifice instrument connection)
pressure instrument connection)
S88.005  Steam lance
INTERNATIONAL CODES AND STANDARDS
ASME B31.3 (2020)  Process Piping

API 520 (Oct 2020)  Sizing, Selection, and Installation of Pressure-
Relieving Devices
API 598 (Oct 2016)  Valve Inspection and Testing
ASTM A36 (2019)  Standard Specification for Carbon Structural
Steel
NACE MR0175 (2015)  Petroleum and natural gas industries
Materials for use in H2Scontaining environments
in oil and gas production
NACE MR0103 (2015)  Petroleum, petrochemical and natural gas
industries - Metallic materials resistant to sulfide
stress cracking in corrosive petroleum refining
environments
EJMA Standard (2017) _ Standards of the Expansion Joint Manufacturers
Association
ASME B1.1 (2019)  Unified Inch Screw Threads
ASME B1.20.1 (2013)  Pipe Threads, General Purpose (Inch)
ASME B16.5 (2020)  Pipe Flanges and Flanged Fittings NPS 1/2
Through NPS 24
Open
OWNER Doc No. :
INTEGRATED COMPLEX
ASME B16.9 (2018)  Factory-Made Wrought Butt-welding Fittings

ASME B16.10 (2017)  Face-to-Face and End-to-End Dimensions of
Valves
ASME B16.11 (2016)  Forged Fittings, Socket-Welding and Threaded
ASME B16.20 (2017)  Metallic Gaskets for Pipe Flanges Ring-Joint,
Spiral-Wound, and Jacketed
ASME B16.21 (2016)  Nonmetallic Flat Gaskets for Pipe Flanges
ASME B16.25 (2017)  Butt-welding Ends
ASME B16.34 (2020)  ValvesFlanged, Threaded, and Welding End
ASME B16.36 (2020)  Orifice Flanges
ASME B16.47 (2020)  Large Diameter Steel Flanges NPS 26 Through
NPS 60
ASME B16.48 (2020)  Line Blanks
ASME B18.2.1 (2012)  Square, Hex, Heavy Hex, and Askew Head
Bolts and Hex, Heavy Hex, Hex Flange, Lobed
Head, and Lag Screws (Inch Series)
ASME B18.2.2 (2015)  Nuts for General Applications: Machine Screw
Nuts, Hex, Square, Hex Flange, and Coupling
Nuts (Inch Series)
ASME B36.10M (2018)  Welded and Seamless Wrought Steel Pipe
ASME B36.19M (2018)  Stainless Steel Pipe
API 594 (2017)  Check valves: Flanged, Lug, Wafer and Butt-
welding
API 600 (2021)  Steel Gate Valves-Flanged and Butt-welding
Ends, Bolted Bonnets
API 602 (2015)  Steel Gate, Globe, and Check Valves for Sizes
NPS 4 (DN 100) and Smaller for the Petroleum
and Natural Gas Industries
API 603 (2018)  Corrosion-resistant, Bolted Bonnet Gate
ValvesFlanged and Butt-welding Ends
API 607 (2016)  Fire Test for Quarter-turn Valves and Valves
Equipped with Nonmetallic Seats
API 608 (2020)  Metal Ball Valves - Flanged, Threaded, and
Welding Ends
API 609 (2021)  Butterfly Valves: Double-flanged, Lug- and
Wafer-type
API 610 (2021)  Centrifugal Pumps for Petroleum,
Petrochemical and Natural Gas Industries
API 650 (2020)  Welded Tanks for Oil Storage
API 661 (2013)  Air-Cooled Heat Exchangers for General
Refinery Service
API 662 (2002)  Plate Heat Exchangers for General Refinery
Services
MSS SP 25 (2018)  Standard Marking System for Valves, Fittings,
Flanges, and Unions
MSS SP 44 (2019)  Steel Pipeline Flanges
Open
OWNER Doc No. :
INTEGRATED COMPLEX
MSS SP 45 (2020)  Bypass and Drain Connections

MSS SP 53 (2021)  Quality standard for steel castings and forgings
for valves fittings and other piping components
- Magnetic particle examination method
MSS SP 54 (2013)  Quality Standard for Steel Castings for Valves,
Flanges, Fittings, and Other Piping
Components - Radiographic Examination
Method Standard Practice
MSS SP 55 (2011)  Quality Standard for Steel Castings for Valves,
Flanges, Fittings, and Other Piping
Components - Visual Method for Evaluation of
Surface Irregularities
MSS SP 75 (2019)  High-Strength, Wrought, Butt-Welding Fittings
MSS SP 81 (2017)  Stainless-Steel or Stainless-Steel-Lined,
Bonnetless, Knife Gate Valves with Flanged
Ends
MSS SP 95 (2018)  Swage (d) Nipples and Bull Plugs
MSS SP 97 (2019)  Integrally Reinforced Forged Branch Outlet
Fittings Socket Welding, Threaded, and Butt-
welding Ends
BS 1868 (2010)  Specification for Steel check valves (flanged
and butt-welding ends) for the petroleum,
petrochemical and allied industries
BS 1873 (2018)  Specification for Steel Globe and Globe Stop
and Check Valves (Flanged and Butt-Welding
Ends) for the Petroleum, Petrochemical and
Allied Industries
BS 3799 (2017)  Specification for Steel Pipe Fittings, Screwed
and Socket-Welding for the petroleum industry
BS EN 12560-6 (2003)  Flanges and their joints Gaskets for class-
designated flanges Part 6: Covered serrated
metal gaskets for use with steel flanges
EN 10204 (2019)  Metallic products - Types of inspection
documents
ISO 5208 (2020)  Industrial valves Pressure testing of metallic
valves
ISO 10497 (2010)  Testing of Valves - Fire type-testing
requirements
ISO 15761 (2020)  Steel gate, globe and check valves for sizes DN
100 and smaller, for the petroleum and natural
gas industries
ISO 15848 (2015)  Industrial Valves Measurement, test and
qualification procedures for fugitive emissions
ISO 17292 (2015)  Metal ball valves for petroleum, petrochemical
and allied industries
Open
OWNER Doc No. :
INTEGRATED COMPLEX
REQUIREMENTS
GENERAL
Piping system shall be designed for the most severe conditions to which it may be
subjected to throughout it intended service life period. RAPID-P0014-OUI-PRO-DES-
0001-0041 Project Specification - Definition of Temperature, Pressure and Toxicity
Levels shall be referred to for the definition of terminology and guidelines to determine
temperature and pressure levels essential for proper design and operation. Final design
conditions for all process and utilities lines shall be summarized in a line list prepared
by the Process Engineers.
Piping system shall be designed and executed to conform with the MCF (Mandatory
Control Framework) requirements as per Attachment 1, and HSE (Heath, Safety and
Environment) procedure applicable to this PROJECT.
Brownfield nature in the design consideration shall be given since this PROJECT to be
taken place within RAPID existing facilities.
RAPID specification to be used as main reference for this PROJECT. Reference shall be
made to the listed document specified in Sections 4.0 and 7.0. All reference within the
documents applies for this PROJECT.
Piping scope under this PROJECT shall conform to the requirements of ASME B31.3.
Closed Process drains and collection systems for oils and special waste systems shall
be regarded as process plant pipework and shall be designed in accordance with ASME
B31.3.
Piping system within PACKAGE equipment shall be designed in accordance with

PROJECT specification. Any deviations shall obtain the approval from OWNER.
DESIGN LIFE
The piping system shall be designed and constructed for a minimum service life of 20
years.
PLANT LAYOUT AND EQUIPMENT SPACING DESIGN
In general, this section is to define the basic design, equipment spacing criteria and
standards to be used in the layout of the overall plant, complex and unit plot plans.
As minimum, plant layout design for new facilities shall be:

 Safe to personnel
 Reliable
 Easy to operate and maintain
 Efficient
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Further details and recommendation on the plant layout and equipment spacing design
requirement and criteria shall be referred to TOSP-P038-EXE-DEC-6335-PIP-SPN-
0001 - Specification for Plant Layout and Equipment Spacing Design Requirements &
Criteria.
PIPING LAYOUT
Piping layout shall be design and constructed as per requirement stipulated in TOSP-
P038-EXE-DEC-0001-PIP-SPN-0002 Specification for Piping Layout and Installation
and other references within the specification.
All piping shall be arranged to conform to requirements for operation, safety, inspection
and maintenance. Specific attention shall be given to clearances required for the
removal of pumps, exchanger bundles, drum head and other requirement identified in
material handling study.
All piping shall be routed to provide a simple, economic layout, allowing for easy
support and adequate flexibility.
Piping shall be supported to prevent sagging, minimize mechanical stresses and

vibrations and to allow for thermal, structural and mechanical movement.
Design of underground piping system shall conform to Section 8.3 Underground

piping system of TOSP-P038-EXE-DEC-0001-PIP-SPN-0002 Specification for Piping
Layout and Installation.
PIPING MATERIAL
Piping material specification for Interconnecting and ETP scope shall be referred to
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials for
detail requirement for materials used in the PROJECT.
All asbestos and materials containing asbestos or other hazardous material shall not
be used.
PIPES
Pipe dimension and tolerances shall be in accordance with ASME B36.10 for carbon
steel and ASME B36.19 for stainless steel.
Non-standard pipe sizes such as 3/8, 1 ¼, 2 ½, 3 ½, 4 ½, 5, 7, 9 and 22 shall
not be used, unless specifically dictated by process. However, the usage shall be upon
approval from OWNER.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
FLANGES
Dimensions and tolerances shall be in accordance with ASME 16.5 for all flange sizes
up to 24 and ASME B16.47 Series A for sizes 26 and above. Inside diameters of weld
neck flanges shall generally be equal to those of connecting pipes.
Flanges shall be raised face or flat face in accordance with ASME B16.5 or calculated
in accordance with ASME Section VIII for large bore application. Flange facing finish
shall be in accordance with ASME B16.5 or ASME B16.47 Series A as applicable.
Higher class rating shall be selected when there is a class break with lower rating class.
FITTINGS
Dimensions of metallic fittings shall be in accordance with ASME B16.9 welded fittings
and ASME B16.11 for threaded and socket welding fittings. Branch outlet fittings shall
be as per PTS standard drawing and MSS-SP-97.
VALVES
Valve selection criteria shall comply with minimum requirement for plant operations
together with economic considerations. For specific requirement on valves, refer to
TOSP-P038-EXE-DEC-0001-PIP-SPN-0003 Specification for Valves.
Valve design shall be in accordance to the general requirements of PMRC MAR VA/122
and the applicable standard.
Valve shall also conform to any mandatory or additional requirement listed in each
items purchase specification listed in PMRC MAR database.
BOLTS AND NUTS
Bolt and nut shall conform to ASME B18.2.1 and ASME B18.2.2 respectively with other
relevant ASTM standard as stated in the piping material specification documents above.
GASKET
As a general rule, the gasket inside diameter shall not extend beyond the inside
diameter of the flanges bore i.e. gasket diameter shall match the bore of the flange
and shall not restrict the flow of the process fluids.
Dimension of metallic gasket shall be in accordance with ASME B16.20 and non-metallic
gasket shall be in accordance with ASME B16.21.
Spiral wound gasket shall be installed in new condition with no defect on the flange
facing area (spiral wound). The gasket shall never be re-used.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Insulation gasket kit shall be used to prevent galvanic corrosion when two (2) dissimilar
materials of construction are in contact, and shall be in accordance with Section 7.8.6
Insulation Gasket of TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for
Piping Materials.
INSULATION
Insulation shall be in accordance with TOSP-P038-EXE-DEC-0001-PIP-SPN-0008

Specification for Hot Insulation and TOSP-P038-EXE-DEC-0001-PIP-SPN-0009
Specification for Cold Insulation for PROJECT application.
NON-METALLIC PIPING
Non-metallic piping shall be in accordance with PTS 30.10.02.13 dated October 2009:
Non-metallic Material Selection & Application
For PROJECT application for GRE, GRVE and GRUP piping, TOSP-P038-EXE-DEC-0001-
PIP-SPN-0016 - Specification for Glass-Fibre Reinforced Plastic Pipeline and Piping
System shall be referred.
11.9 PIPE BEND

Pipe bend shall be used for pigging application. The radius of pipe bend shall be as
specified in the P&ID, and shall conform to the requirement as assigned pipe class in
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials.
PIPING TIE-INS
Piping tie-ins to existing piping shall be of the same material, wall thickness and should
have the same design pressure and temperature limits.
All new tie-ins shall be listed in tie-in list with corresponding tie-in numbers, and type
of tie-in to be performed. All identified tie-ins shall be listed and referred to in TOSP-
P038-EXE-DEC-3900-PRO-LST-0001 - Tie-in List (Interconnecting) and TOSP-P038-
EXE-DEC-6335-PRO-LST-0002 - Tie In List Effluent Treatment Plant (ETP)
Welded tie-ins shall be opted to a minimum. Wherever possible and practical, tie-ins
should be positioned at available existing flange connections.
In case the tie-ins unable to be installed by means of flanges, a wall thickness and
lamination check shall be performed for actual thickness analysis for welding
connection to be located. Dehydrogenation is required for piping exposed to hydrogen
pressure containing service piping.
The flexibility of existing piping that identified for tie-in shall be verified up to the
nearest tie-up anchor point(s). Refer to Section 15.0 in this document for requirement
on flexibility requirement on existing piping.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Additional pipe support shall be introduced to the existing piping systems if required to
ensure no excessive load applied to the piping systems.
Hot-tapping on the line shall be done in the event that tie-in work is unable to be done
due to valid operation and technical reason, and shall be executed in accordance with
TOSP-P038-EXE-DEC-0001-PIP-SPN-0023 Specification for Hot Tapping.
The requirement for spec break shall be as per assigned pipe class, as specified in
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Specification for Piping Materials.
SPECIALTY PIPING ITEMS
In general, materials, pressure and temperature design limits of specialty piping items
shall be consistent with the respective piping class. Detailed specification and datasheet
shall be prepared for each type/size/rating of the specialty piping item.
Each specialty piping item shall be assigned with a Tag number for identification.
Datasheet shall be developed for specialty piping items as part of procurement
purposes.
The following piping items are considered as special items:

 Valves Interlocking Devices
 Strainer on pumps suction lines
 Steam Trap on steam and condensate lines
 Quick Coupling
 Flexible Hose
 Post-indicator valves for firewater lines
 Sight Glass
 Breather Valves
 Eye-wash and Safety Showers
 Flame Arrestors
PIPE SUPPORT
Pipe support design and application shall comply with TOSP-P038-EXE-DEC-0001-PIP-

SPN-0008 - Specification for Pipe Supports. Pipe stress analysis result shall be made
as reference in the design and for the locations of pipe supports.
The piping systems shall be supported in order to prevent:

 Failure of piping components due to over stresses
 Leakage at joints
 Excessive loads and moments on connected equipment, anchor points, flanged
connections, etc.
 Failures due to vibration induced fatigue
 Prevent excessive sagging above the maximum allowable sag
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Related documents for pipe support as listed below are applicable to this PROJECT. Any
additional support standard issued by CONTRACTOR shall be updated in the respective
documents stated, and shall be verified by calculation.
Documents Number Documents Title

TOSP-P038-EXE-DEC-0001-PIP-SPN- Specification for Spring Supports and Rod
0018 Hangers
TOSP-P038-EXE-DEC-0001-PIP-SPN- Specification for Sliding Plates
0019
TOSP-P038-EXE-DEC-0001-PIP-SPN- Specification for Rigid Struts
0020
TOSP-P038-EXE-DEC-3900-PIP-DWG- Pipe Support Standard Drawings for
0005 Scope 1
TOSP-P038-EXE-DEC-6335-PIP-DWG- Pipe Support Standard Drawings For
0005 Scope 2
PIPE STRESS ANALYSIS
All new piping systems and related existing piping system within the scope of the
PROJECT shall be assessed for pipe flexibility to avoid excessive stress applied on piping
systems. The pipe stress analysis shall be in accordance withTOSP-P038-EXE-DEC-
0001-PIP-SPN-0005 Specification for Stress Analysis.
All lines, in general, shall be assessed to ensure adequate flexibility on the piping
systems and acceptable load applied on equipment nozzle connections.
Formal computer flexibility shall be made of stress critical lines identified as per
requirement stated inTOSP-P038-EXE-DEC-0001-PIP-SPN-0005 Specification for
Stress Analysis document.
Piping tie-ins to the existing system shall be stress analysed up to the nearest anchor
points in the existing piping system. Existing anchor points reaction loads shall be
verified for adequacy of support.
Existing piping shall have sufficient inherent flexibility to prevent overstress due to the
added reactions loads. Where the existing anchor points are unacceptable in terms of
code stress, the preferred solution is to consider re-routing the piping, if space permits.
3D MODEL
The detailed 3D model shall contain, but not limited to, roads, access ways, structures,
pipe-racks, pipe-ways, pipe supports, equipment, platforms, buildings, aboveground
and underground pipes and components, safety facilities, cable trays, ditches, trenches
and all associated fittings.
3D model shall be developed using SmartPlant (SP) 3D software. This 3D model shall
be used as a design tool. It shall provide visual check on the safety, operability,
maintainability, material handling, Human Factor Engineering (HFE), facilitate the
Open
OWNER Doc No. :
INTEGRATED COMPLEX
engineering and erection of the facilities and shall assist construction work. The 3D
model shall also be used for training of personnel for planning and maintenance
purposes.
3D Model review shall be conducted during 30%, 60% and 90% of the model
development.
Further detail requirement of 3D model shall refer to TOSP-P038-EXE-DEC-0001-PIP-

SPN-0015 Specification for Plant Model Construction and Review.
FABRICATION AND INSTALLATION
Shop and field fabricated piping shall be in accordance with ASME B31.3, as further
specified in TOSP-P038-EXE-DEC-0001-PIP-SPN-0026 Specification for Shop and
Field Fabrication of Piping. The general requirement of welding, fabrication tolerances,
inspection and Non-destructive examination are specified in this specification.
Piping surface preparation, paint system and colour code requirement shall referred to
TOSP-P038-EXE-DEC-0001-MCI-SPN-0001 - Specification for Painting and Coating.
For underground wrapped pipe, TOSP-P038-EXE-DEC-0001-PIP-SPN-0004 -
Specification for Underground Pipe with Anti-Corrosion Wrapping shall be referred.
Piping system shall be subjected for pressure testing upon completion of all required
examination and stress relieving, before internal cleaning of the pipe. It shall be
executed in accordance with TOSP-P038-EXE-DEC-0001-PIP-SPN-0007 Specification
for Piping Pressure Testing, and TOSP-P038-EXE-DEC-0001-QAC-PRC-0024 - Piping
Hydrostatic Test and Reinstatement Procedure.
After successfully completed the pressure testing, reinstatement and line cleaning shall
conform with TOSP-P038-EXE-DEC-0001-QAC-PRC-0024 - Piping Hydrostatic Test and
Reinstatement Procedure and TOSP-P038-EXE-DEC-0001-QAC-PRC-0025 - Flushing
and Blowing Procedure respectively.
Open
ATTACHMENT 1
APPLICABLE MCF REQUIREMENTS
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001
DESIGN BASIS FOR PIPING
Total 6 pages
PTS 12.30.02: Piping General Requirement (December 2017)
Reference
No Page and Requirements
Section
PIPING BELOW GROUND LEVEL

Pg 16 / Para Pipe tracks and pipe trenches
1
3.4.2 iv. To prevent the buildup of gas and liquid vapours in the trenches, flanged
connections shall(PSR) not be installed in trenches.
Pg 18 / Para INSTALLATION OF FLANGES
2
3.10.4 For hydrocarbon services, flanges shall(PSR) not be located above roads.
INSTALLATION OF VALVES
Pg 19 / Para All pipes All pipes entering and leaving the process unit shall(PSR) have a block
3
3.12.1 ii. valve and flanges provided to allow for positive isolation (spades or spectacle
blinds) at the boundary of the process unit (battery limit).
CONNECTIONS FOR MANUAL SAMPLING

Sample outlets for fluids above their auto-ignition temperature, for LPG and for
Pg 26 / Para
4 very toxic products shall(PSR) have a self-closing downstream valve. If the effluent
3.14.15
could flash and create sub-zero temperatures, the distance between the two valves
(PSR)
shall be at least 600 mm.
PUMP, COMPRESSOR AND STEAM TURBINE PIPING
Pumps
Pg 33 / Para A check valve shall(PSR) be installed unless there is no possibility of backflow or
7
4.2.2.i.c) pressure surge under any conditions. This check valve shall(PSR) be installed
upstream of the block valve to enable maintenance of the check valve without
draining the discharge pipe.
Pumps
A bypass shall(PSR) be installed in the following cases: (N)
-if discharge and suction pipe operating temperatures are above 150 °C
Pg 34/ Para -if the pumped fluid can solidify at ambient temperature, e.g. water pipes in
8
4.2.2.ii.b) freezing climates
-if discharge/suction pipe operating temperature is below 10 °C
-if draining of the space downstream of the check valve is required.
-for pumps handling highly volatile liquids at pumping temperatures, e.g. LPG
service

Pg 36 / Para Venting / flushing
9
4.2.2 vii. c) Pumps handling butane or lighter process fluids shall(PSR) have a vent pipe to the
flare system. The vent pipe shall(PSR) have a spectacle or spade blind.

Venting / flushing
Pg 36 / Para
10 Pumps handling cryogenic process fluids shall(PSR) have a vent pipe to the suction
4.2.2 vii. d)
drum. The vent pipe shall(PSR) have a spading point and shall follow the shortest
practical route to the suction drum.
Venting / flushing
In order to facilitate safe priming of pumps handling hydrocarbons above their auto-
ignition temperature, one of the following piping systems shall(PSR) be used:
i. The preferred method is to install (cold) flushing oil supply and return
connections and a bypass around the check valve. This is only feasible if the
Pg 36 / Para
11 pumped product is compatible with the flushing oil. It may not be a practical
4.2.2 vii. e)
solution if no flushing headers are available in the vicinity.
ii.The installation of venting/priming pipes with readily accessible valves from the
highest point in the pump arrangement, i.e. the casing vent and/or a high point
vent in the suction pipe, back to the suction vessel above the normal liquid level,
and a bypass around the non-return valve.
TOSP-P038-EXE-DEC-0001-PIP-DES-0001 1 of 6
Reference
Section

Pressure relief
Pg 34 / Para Positive displacement pumps shall(PSR) be safeguarded against a blocked outlet
12
4.2.2 ix. with a pressure-relief device. This shall(PSR) not be an integral part of the pump.
The relief valve shall(PSR) be installed in a bypass between the discharge pipe
upstream of the block valve and the suction vessel.

Compressors
Pg 38 / Para Except for reciprocating compressors, compressor discharge pipes shall(PSR) have a
13
4.2.3 vi. check valve between the block valve and the discharge nozzle as close as practical
to the compressor discharge nozzle.

Compressors
Pg 38 / Para To protect against a blocked outlet, reciprocating compressors shall(PSR) have a
14 pressure-relieving device installed in a bypass between the discharge pipe
4.2.3 ix.
upstream of the block valve and the suction vessel. Interstage sections shall(PSR)
also be protected by relief valves.

Compressors
Pg 39 / Para
15 Compressors in hydrocarbon or very toxic service shall(PSR) have purge facilities.
4.2.3 xv.
Spading capability shall(PSR) be provided by spectacle blinds, removable spool
pieces or elbows.

Pg 39 / Para Steam turbines
16
4.2.4 i. The relief valve shall(PSR) be installed between the turbine outlet and the check
valve.
Pg 39 / Para Steam turbines
17
4.2.4 v. Steam vents shall be routed to a safe location and shall(PSR) not be combined with
any lubricating oil, seal oil or process vent
HEAT EXCHANGER PIPING
Heat exchangers shall(PSR) have a check valve in the steam inlet if the normal
steam pressure is less than 110% of the process relief valve set pressure or, if
there is no relief valve, 110% of the process design pressure.
Pg 40 / Para
18
4.3.7
The design shall(PSR) take tube burst into account and shall(PSR) include facilities
to prevent undesirable effects, e.g, back-flow of hydrocarbons into steam systems,
hydrocarbon entry into condensate or water systems, and entry of water into hot
hydrocarbon systems.
PRESSURE VESSEL PIPING

Pg 41 / Para To prevent the product from entering the steam pipe, a check valve shall (PSR) be
19
4.5.6 installed close to and upstream of the regulating valve with a low point drain (with
valve) between them.
LEVEL GAUGES
Pg 43 / Para Connections
20
4.7.3 ii. b) Double block valves shall(PSR) be fitted in ASME rating classes 600 and above for
hydrogen services, and ASME rating classes 900 and above for other services.
Reference
Section
LEVEL GAUGES
Pg 43 / Para Connections
21
4.7.3 ii. c) Level gauges shall(PSR) be connected with block valves between them and the
equipment.
Pg 48 / Para STEAM
22
5.4.5 Steam pipes shall(PSR) have a block valve at the boundary of the process unit.
STEAM
Pg 48 / Para Steam pipes connected to process pipes shall(PSR) be fitted with a block valve.
23
5.4.6 A check valve shall(PSR) be installed upstream of the block valve, with a bleeder in
between them.
ISOLATION
Double bleed valves shall(PSR) be provided for flashing fluids, or very toxic fluids.
This includes isolation for all instrument (e.g. control valves, relief valves, level
gauges) mounted on pressurized fluid containing equipment or piping. The
Pg 63 / Para
24
8.7.4 downstream side of the bleed valves shall(PSR) be: (N)
-connected to safe location for fluids classed as very toxic acute and for flashing
fluids,
-Connected to a closed disposal/incineration/flare system for fluids classed as very
toxic carcinogenic or very toxic mutagenic;
ISOLATION
Where double valve isolation is required, it shall(PSR) be applied to: (N)
i.control valves with by-pass sets

Pg 64 / Para
25 ii.the upstream side of relief valves requiring isolation valves
8.7.4
iii.pumps
iv.level gauges
v.other on-stream equipment isolation
ISOLATION
The need for positive isolation is dictated by special safety and/or process
requirements.
Pg 68 / Para Positive isolation shall(PSR) be provided when: (N)
26 i.hot work is to be done; or
8.8.1
ii.equipment is to be hydrostatically tested; or
iii.entry by personnel is required for inspection or maintenance; or
iv.equipment is to be opened or removed whilst the remainder of the unit is still in
operation
THERMAL INSULATION
In the following situations flanges shall(PSR) not be insulated.
Pg 77 / Para i.flanges in hydrogen service;
27
10.1.3 ii.flanges in systems containing hydrocarbons above their auto-ignition
temperature;
iii.if the 80% rule for bolting has been applied in accordance with ASME B31.3.
WET H2S SERVICE

Process environment in normal operating condition and short-term upsets e.g start-
Pg 159 / Para
28 up, shutdown, process upsets, shall(PSR) be considered if the damage mechanism
18.3.1
is anticipated. For normal operating condition, Table 18.2 provides the Wet H2S
severity category based on pH, cyanide content and suplhide content of water. (N)
WET H2S SERVICE

Pg 161/ Para All materials exposed to wet H2S service including pressure retaining base
29
18.4.1 materials shall(PSR) be supplied with an inspection certificate in accordance with EN
10204 Type 3.2. (N)
PTS 12.30.05: Shop and Field Fabrication of Piping (January 2017)
Reference
Section
Pg 18 / Para (PSR)
Weld repairs of cracks in pipe bends shall not be permitted. \(N)
1 3.4.1 viii.
Pg 19 / Para (PSR)
Cold bending shall not be used for piping in sodium hydroxide service.
2 3.4.2
(PSR)
Pg 21 / Para After bending, the bend shall be visually inspected. There shall be no cracks
3
3.4.4 i. or linear indications. (N)
The surface of bends shall (PSR) be free of the defects listed below:
Pg 38 / a) any crack or suspected crack;
4
Appendix 2 b) any limitation, lap or dent;
c) any excessive wrinkles as defined in (3.7.1).
Pg 47 (PSR)
5 During a pneumatic pressure test, no bolting work shall be performed.(N)
/Appendix 5
PTS 12.30.07: Hot-tapping on Pipelines, Piping and Equipment (January 2017)
Reference
Section
With reference to above, welding on equipment or pipe which consist hazardous
Pg 14 / Para substances or conditions listed below shall (PSR) not be executed unless positive
1
3.2.3 proof has been obtained and confirm that welding/hot tapping can be applied
safely.(N)
At any time during the hot-tap operation the pressure of fluid inside the run-pipe
Pg 17 / Para
2 for general safety reasons shall not exceed 80 barg nor shall (PSR) it exceed the
3.3.3
maximum working pressure of the hot-tap equipment if this is lower.(N)
Pg 17 / Para Pressure of process fluid
3 (PSR)
3.3.3 i. Hot-tapping shall not be performed on equipment at vacuum conditions.
Process fluid velocity
Pg 19 / Para Minimum velocity
4 (PSR)
3.3.4 a)Purging with a minimum velocity of 0.4m/s shall be used in the cases
where this requirement cannot be met.(N)
In accordance with the appropriate design codes and standards, branch

Pg 21 / Para connections shall (PSR) be designed as per below:
5
4.2.1 i. on-plot piping : ASME B31.3 and ASME B31.1
ii. off-plot pipeline : ISO 13623, ASME B31.4, or ASME B31.8
PTS 12.32.01: Relief Valve – Selection, Sizing, Specification, Inspection and Testing (July 2017)
Reference Page
No Requirements
and Section
CRITERION FOR RELIEF DEVICE SELECTION
Pg 7 / Para The outlet flange for PRVs that relieve to pressurized system shall(PSR) be selected
1
2.1.3 in accordance to the maximum superimposed and built-up back pressure and
temperature to which it is subjected to.(R)
PRESSURE RELIEF DEVICE DESIGN TEMPERATURE
Pg 9 / Para i. The design temperatures of the PRVs shall(PSR) be determined by the inlet
2
2.2.3 and outlet temperature result from extreme operating and relieving conditions for
use in design of PRVs.
PRV-BALANCED TYPE
Pg 9 / Para i. Balanced type PRVs or pilot operated PRVs as an alternate shall(PSR) be used
3 when the built-up back pressure including the variable superimposed back pressure
2.3.3
is higher than that allowed for a non-balanced valve as recommended in API
520.(N)
PRV-PILOT-OPERATED TYPE
ii. If there is a possibility of freezing of process fluids due to environment or
Pg 10 / Para
4 during operation, heat tracing or purging shall(PSR) be installed.
2.3.4
iii. Alarms shall(PSR) be installed to alert operators in heat tracing and/or
purging with these systems.
BURSTING DISKS OR RUPTURE DISKS
Pg 12 / Para c) Rupture disk shall(PSR) be sized and specified in accordance with the disk
5
2.3.6 (i) manufacturers recommendation and relevant design code. Detail on rupture disk
sizing is indicated in para 3.2.1 of this PTS.(N)
SPECIFIC SELECTION CRITERIA

Pg 15/Para
6 Pressure/vacuum vents
2.3.9
i. The set points for pressure/vacuum vents (PVVs) shall(PSR) be below the tank
designed gauge pressure and above the tank designed vacuum pressure.
PRV SIZING
Pg 16 /Para
7 c) The size of the PRV shall(PSR) be determined from the largest relief area
3.1.1 (i)
required for overpressure protection for all scenarios in accordance with PTS
16.53.01.(N)
SUPERCRITICAL FLUID
Pg 17 /Para
8 b) The relief device shall (PSR) be able to accommodate the maximum
3.1.5 (i)
volumetric expansion rate as determined using the method of PTS 16.53.01.(N)
SET PRESSURE CONSIDERATION
Pg 19 /Para
9 i. Set pressures (SP) shall(PSR) not exceed the MAWP (or design pressure),
4.2.3
except where allowed by the design code.(N)
General Notes: Above listed PTS 12.32.01 - Relief Valve Selection, Sizing, Specification, Inspection and
Testing (July 2017) MCF checklist is not applicable to Piping as relief valve design and selection is by
Instrument and Mechanical Static.
ATTACHMENT C
TOSP-P038-EXE-DEC-0001-PIP-SPN-0001
Specification for Piping Materials
OWNER Doc No. :
SPN-0001
Revision : 0
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND

COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT (N-OSBL) Page : 1 of 50

INTEGRATED COMPLEX

BHD
DOCUMENT : SPECIFICATION FOR PIPING

TITLE MATERIALS
DOCUMENT : Z
REVIEW CLASS
Issued as
0 17-06-22 M
M==$/SMH
==
=$/S
/SMH
MH LK
L KE/C
LKE/CHW/BQ LL
L LK
LLK
Final
P
Prepared Reviewed
R
Re v Approved Reviewed Endorsed Approved
CONTRACTOR OWNER
©[2021] PETROLIAM NASIONAL BERHAD (PETRONAS). All rights reserved. No part of this document may be reproduced, stored in a retrieval system or
transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.
Open
.
Date: 28-Apr-22
CRS No: TOSP-P038-EXE-DEC-0001-PIP-SPN-0001_C-CRS
Rev No: C

Doc. No. TOSP-P038-EXE-DEC-0001-PIP-SPN-0001 Title: SPECIFICATION FOR PIPING MATERIALS X CODE 1, ACCEPTED
Rev. No. C
Transmittal No TOSP-P038-EXE-DEC-PRPCUF-TRM-1113
1 No further comment. Item in HOLD list shall be resolved. Comment incorporated.
The current selection of material for Treated Water

service pipe class will be updated and justified in the
2 Treated water material are not consistent with CDBM
upcoming revision of TOSP-P038-EXE-DEC-0001-MCI-DES-
0001 Corrosion Design Basis Memorandum.
3 confirmed and update this hold item before issuing the next rev ie IAF Comment incorporated.
Name: HUDZAIFAH B Z ARIFUDIN Name: SHAHZULREZA B SAIFUL

Position: MECHANICAL Position: PIPING
Internal
OWNER Doc No. :
BATTERY LIMIT (N-OSBL) FACILITY PIP-SPN-0001
INTEGRATED COMPLEX
SPECIFICATION FOR PIPING MATERIALS Page : 2 of 50
AMENDMENT LIST
REV REVISION DATE DESCRIPTION OF CHANGE

B 19-11-21 Issued for Approval
C 10-03-22 Re-Issued for Approval
Open
OWNER Doc No. :
INTEGRATED COMPLEX
HOLD LIST
ID DESCRIPTION OWNER DISCIPLINE DOCUMENT SOURCE
Open
OWNER Doc No. :
INTEGRATED COMPLEX
TABLE OF CONTENT
1.0 PROJECT BACKGROUND............................................................................. 6

2.0 PURPOSE ................................................................................................. 7
3.0 PROJECT REFERENCE ................................................................................ 8
4.0 ABBREVIATIONS ....................................................................................... 8
4.1 PARTIES INVOLVED AND DEFINITIONS ....................................................... 8
4.2 ACRONYMS / ABBREVIATIONS .................................................................... 9
5.0 APPLICABLE STANDARD .......................................................................... 10
5.1 DESIGN CODE ........................................................................................ 10
5.2 PETRONAS STANDARD ............................................................................ 10
5.3 PROJECT SPECIFICATION AND PROCEDURES ............................................. 14
5.4 RAPID PROJECT SPECIFICATION ............................................................... 15
5.5 DEVIATION REQUEST .............................................................................. 18
5.6 TECHNICAL QUERY ................................................................................. 19
5.7 STANDARD DRAWINGS ........................................................................... 19
5.8 AMERICAN STANDARDS ........................................................................... 20
5.9 BRITISH / INTERNATIONAL STANDARDS ................................................... 23
5.10 ORDER OF PRECEDENCE .......................................................................... 24
6.0 TERMINOLOGY ....................................................................................... 24
6.1 BASE CODE ............................................................................................ 24
6.2 DESIGN CONDITIONS ............................................................................. 24
6.3 PRESSURE-TEMPERATURE RATINGS .......................................................... 25
6.4 CORROSION ALLOWANCE ........................................................................ 25
6.5 PIPE WALL THICKNESS ............................................................................ 25
6.6 BRANCH CONNECTIONS .......................................................................... 25
6.7 VACUUM CONDITIONS............................................................................. 26
6.8 SOUR / WET H2S SERVICE ....................................................................... 26
6.9 PIPE CLASS ............................................................................................ 26
7.0 MATERIALS AND DESIGN ......................................................................... 28
7.1 PURCHASE SPECIFICATIONS .................................................................... 28
7.2 PIPING CLASSES AND COMPONENTS......................................................... 29
7.3 VALVE ................................................................................................... 30
7.4 PIPE ...................................................................................................... 30
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.5 FITTINGS ............................................................................................... 31

7.6 Pipe bend............................................................................................... 32
7.7 BRANCH CONNECTIONS .......................................................................... 32
7.8 FLANGES ............................................................................................... 33
7.9 BOLTING ............................................................................................... 33
7.10 GASKETS ............................................................................................... 36
7.11 SPECTACLE BLINDS, SPACER RINGS & SPADES .......................................... 37
7.12 THREADED JOINTS ................................................................................. 38
7.13 PIPE SUPPORT MATERIALS ....................................................................... 39
7.14 PIPING ASSEMBLIES ............................................................................... 39
8.0 MARKING ............................................................................................... 39
9.0 INSPECTION AND TEST ........................................................................... 39
9.1 MetALLIC Piping...................................................................................... 39
9.2 NON MetALLIC Piping .............................................................................. 39
9.3 Valve Inspection ..................................................................................... 39
9.4 Pressure tests ........................................................................................ 40
10 MATERIAL CODING ................................................................................. 40
10.1 PMRC .................................................................................................... 40
10.2 INDEX OF PIPING CLASS ......................................................................... 41
APPENDIX 1 - PIPING CLASS INDEX SUMMARY FOR SCOPE 1 ......................................... 43

APPENDIX 2 - PIPE CLASS DETAIL FOR SCOPE 1 ........................................................... 44
APPENDIX 3 - ASSEMBLY DETAILS FOR SCOPE 1 .......................................................... 45
APPENDIX 4 - PIPING CLASS INDEX SUMMARY FOR SCOPE 2 ......................................... 46
APPENDIX 5 - PIPE CLASS DETAIL FOR SCOPE 2 ........................................................... 47
APPENDIX 6 - ASSEMBLY DETAILS FOR SCOPE 2 .......................................................... 48
APPENDIX 7 - GASKET LIST (COMMON) ....................................................................... 49
APPENDIX 8 - PROJECT SPECIFICATION CARBON STEEL PIPING AND EQUIPMENT IN “WET
H2S” SERVICE .......................................................................................................... 50
Open
OWNER Doc No. :
INTEGRATED COMPLEX
1.0 PROJECT BACKGROUND

PETRONAS Chemicals Group Berhad (PCGB) has embarked into a growth project called
“TITANIUM” by selectively diversifying portfolio into derivatives, specialty chemicals
and solutions to support the PCGSB’s vision in becoming the “Preferred Chemicals
Company providing innovative customer solutions”.
One of the project under the Titanium projects is the NUTMEG project which is to build
a 200ktPA Nitrile Butadiene latex (NBL) plant.
development is called N-OSBL project and the project was awarded to Dialog E&C Sdn
Bhd on 22nd. July 2021.
Scope 1:
1. Offsite facility – Flare pipeline from NBL battery limit to existing Petchem flare
tie-in provision.
3. Feedstock Pipeline – Butadiene Line from Cracker Tank Farm and Acrylonitrile
4. Effluent Pipeline – Process wastewater, ACC Line and Utility Effluent Line.
8. New piperack extension (same size and dimension) from the existing piperack
area 3900 to the new NBL plant.
Scope 2:
1. Pre-Collection
7. Filtration
Open
OWNER Doc No. :
INTEGRATED COMPLEX
2.0 PURPOSE
The purpose of this document is to define qualities of the piping materials and prescribe the
specific requirements for materials of construction used in the design and fabrication of
process and utility piping systems for both scope, scope 1: all Interconnecting Works to NBL
Plant and Scope 2: New Effluent Treatment Plant Unit 6335 for the PIC TITANIUM OSBL
PROJECT.
The complete review of the materials selection and other corrosion management
recommendations are covered and confirmed in the CDBM report – TOSP-P038-EXE-DEC-
0001-MCI-DES-0001.
This document contains the following:
a. Piping Class Selection Table applicable for both scope piping for the PROJECT
b. Project Applicable Piping Classes
c. Gasket List
d. Piping Assembly Details
The basis of piping classes selected for the PROJECT application is derived from the existing
RAPID Package 14 piping material class– RAPID-P0014-OUI-PIP-SPN-0001-0019 and RAPID
Package piping material class - RAPID-P016A-VMW-PIP-SPN-6301-1001. Detail reference for
the Piping Class and Service Index shall be referred to below stated appendix:
a. Piping Class Index Summary for (Scope 1: Interconnecting) shall be referred

to Appendix-1.
b. Piping class detail for (Scope 1: Interconnecting) shall be referred to Appendix-

2.
c. Assembly Details for (Scope 1:Interconnecting) shall be referred to Appendix-

3
d. Piping Class Index Summary for (Scope 2: ETP PLANT) shall be referred to
Appendix-4.
e. Piping class detail for (Scope 2: ETP PLANT) shall be referred to Appendix-5.
f. Assembly Details for (Scope 2: ETP PLANT) shall be referred to Appendix- 6
g. Gasket List (Common) shall be referred to Appendix-7
Open
OWNER Doc No. :
INTEGRATED COMPLEX
3.0 PROJECT REFERENCE

• As stated in Section 5
4.0 ABBREVIATIONS
4.1 PARTIES INVOLVED AND DEFINITIONS
The following terms used in this document have the meaning defined below:

COMPLEX
PROJECT
SHALL : The word “shall” is to be understood to be mandatory.
SHOULD : The word “should” is to be understood as strongly

recommended.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
4.2 ACRONYMS / ABBREVIATIONS

The acronyms (or abbreviations) used in this document have the meaning defined below:
ASME American Society of Mechanical Engineers)

ASTM American Society for Testing and Materials
API American Petroleum Institute
AWWA American Water Works Association
BS EN British European Standard
CA Corrosion Allowance
CDBM Corrosion Design Basis Memorandum
DN Diameter Nominal. The DN prefix indicates the nominal
diameter of a piping system component in millimetres
FM Factory Mutual
GRP Glass-fibre Reinforced Piping
HDPE High Density Polyethylene
HF Hard Faced
HV Half Vacuum
ISO International Organization for Standardization
MSS Manufacturers Standardization Society
NDE Non Destructive Examination
NFPA National Fire Protection Association
OSBL Outside of Battery Limit
P&ID Piping & Instrumentation Diagram
PDR Project Deviation Request
PFI Pipe Fabrication Institute
PMRC PETRONAS Material Reference Code
PMRC MAR PMRC Mandatory Additional Requirements
PMT Project Management Team
PTO Integrated Project Team of PTSSB and PRPC
PTS PETRONAS Technical Standard
PVC Polyvinyl Chloride
PVC-C Polyvinyl Chloride - Chlorinated
PWHT Post Weld Heat Treatment
RAPID Refinery And Petrochemicals Integrated Development
Open
OWNER Doc No. :
INTEGRATED COMPLEX
RF Raised Face Ring

UIO Utilities, Interconnecting and Offsite Facilities
UL Underwriters Laboratories
5.0 APPLICABLE STANDARD

5.1 DESIGN CODE
All piping materials and its specifications are selected based on PTS Piping Classes which are
standardized for Petronas. The PTS Piping Classes are defined in RAPID-P0014-OUI-PIP-DES-
0001-9013 (Piping Classes – Basis of Design) and RAPID-P0014-OUI-PIP-DES-0001-9015
(Piping Classes – Refining and Chemicals).
Metallic piping classes have been designated in accordance with ASME B31.3. Non-metallic
piping classes do not specify non-metallic piping components. For design of these
components, reference is made to RAPID-P0014-OUI-MCI-DES-0001-9005.For GRE pipes and
fittings, RAPID-P0014-OUI-PIP-DES-0001-9023 is referred.
The design limits specified in the piping classes have been derived from the
pressure/temperature (P/T) ratings for flanges given in ASME B16.5 for sizes under or
including DN 600 and B16.47 for DN 750-1200 unless otherwise stated in the piping class
notes. There are no piping classes for pressures higher than those allowed by the ASME B16.5
rating class 2500 for the specified design temperature and material. For materials listed, the
relevant values listed in table 2 of ASME B16.5 / B16.47 applies. For comparable materials
not listed, the P/T rating is established in accordance with annex D of ASME B16.5.
The lowest pressure at coinciding temperature selected from the above P/T ratings is
governing for the piping class P/T rating. The piping class notes state which factor(s) is/are
governing.
5.2 PETRONAS STANDARD

PMRC Mandatory Additional Requirement (MAR)
Document Title PMRC (MAR)
Alloy and Stainless Steel Bolts

PMRC MAR BL/100
(Additional Requirements to ASTM A 193/A 193M)
Carbon and Alloy Steel Nuts

PMRC MAR BL/101
(Additional Requirements to ASTM A 194)
Nickel Alloy Bolts and Nuts

PMRC MAR BL/102
(Additional Requirements to EN 10269)
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Coating Requirements for Bolts and Nuts

PMRC MAR BL/103
(Additional Requirements to ASTM B 841)
Y-Type Strainers PMRC MAR FF/100
Spectacle Blinds, Spade Blinds and Spacers

PMRC MAR FF/101
(Amendments/Supplements to ASME B16.48)
Branch Outlet Fittings

PMRC MAR FF/102
(Amendments/Supplements to MSS SP-97)
Branch Fittings PMRC MAR FF/103
Flanges (Amendments/Supplements to ASME B16.5) PMRC MAR FF/104
Flanges (Amendments/Supplements to ASME B16.47) PMRC MAR FF/105
Fittings (Amendments/Supplements to ASME B16.9) PMRC MAR FF/106
Carbon and Alloy Steel Fittings

PMRC MAR FF/107
(Amendments/Supplements to ASTM A 234)
Carbon Steel Fittings

PMRC MAR FF/108
Stainless Steel Fittings

PMRC MAR FF/109
Carbon Steel Forgings

PMRC MAR FF/110
Carbon and Alloy Steel Forgings

PMRC MAR FF/111
Alloy and Stainless Steel Forgings

PMRC MAR FF/112
Carbon Steel Plate

PMRC MAR FF/113
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Alloy Steel Plate

PMRC MAR FF/114
Stainless Steel Plate

PMRC MAR FF/115
Orifice Flanges
PMRC MAR FF/116
Orifice Meter Runs PMRC MAR FF/118
Fittings with Corrosion Resistant Alloy (CRA) Cladding

PMRC MAR FF/127
ASTM A 420
Flanges and Branch Outlets with Corrosion Resistant

PMRC MAR FF/128
Alloy (CRA) Cladding ASTM A350
Covered Serrated Metal (Camprofile) Gaskets

PMRC MAR GS/100
(Amendments/Supplements to EN 12560-6)
Non-Metallic Flat Gaskets, With or Without Insert

PMRC MAR GS/101
Spiral Wound Gaskets

PMRC MAR GS/102
Metal Ring Joint Gaskets

PMRC MAR GS/103
Graphitic Packing Material

PMRC MAR GS/105
(Amendments/Supplements to ASTM F 2168)
Packing Material, Graphite and Carbon Braided Yarn

PMRC MAR GS/106
(Amendments/Supplements to ASTM F 2191)
Carbon Steel Pipe

PMRC MAR PT/100
(Amendments/Supplements to API Spec 5L)
Carbon Steel Pipe

PMRC MAR PT/101
Carbon Steel Pipe

PMRC MAR PT/102
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Carbon Steel Pipe

PMRC MAR PT/103
Carbon Steel Pipe

PMRC MAR PT/104
Alloy Steel Pipe

PMRC MAR PT/105
Alloy Steel Pipe

PMRC MAR PT/106
Stainless Steel Pipe

PMRC MAR PT/107
Stainless Steel Pipe

PMRC MAR PT/108
Hydrogen Induced Cracking Sensitivity Test

PMRC MAR PT/109
(Additional Requirements to NACE TM0284)
Pipe, Seamless with Corrosion Resistant Alloy (CRA)

PMRC MAR PT/119
Cladding ASTM A 333
Pipe, Welded with Corrosion Resistant Alloy (CRA)

PMRC MAR PT/120
Cladding ASTM A 671
Gate, Globe and Check Valves

PMRC MAR VA/101
(Additional Requirements to ISO 15761)
Gate Valves (Additional Requirements to ISO 10434) PMRC MAR VA/102
Globe Valves (Amendments/Supplements to BS 1873) PMRC MAR VA/103
Check Valves (Amendments/Supplements to BS 1868) PMRC MAR VA/104
Plug Valves (Amendments/Supplements to API 599) PMRC MAR VA/106
Ball Valves (Additional Requirements to ISO 17292) PMRC MAR VA/107
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Dual Plate Check Valves

PMRC MAR VA/110
(Amendments/Supplements to API 594)
Butterfly Valves
PMRC MAR VA/111
(Amendments/Supplements to API 609)
Valves in Low Temperature and Cryogenic Services PMRC MAR VA/115
Gate/Globe Valves with Restricted Gland Packing

PMRC MAR VA/116
Tolerance
Valve Stem, Adapter and Bracket Dimensions for
Floating Ball Valves PMRC MAR VA/117
(Amendments/Supplements to EN 15081)
Valves – General Requirements PMRC MAR VA/122
Fugitive Emission Production Testing

PMRC MAR VA/124
(Amendments/Supplements to ISO 15848-2)
Valves with Corrosion Resistant Alloy (CRA) Weld

PMRC MAR VA/126
Overlay Cladding
Lining for Valves PMRC MAR VA/137
Ball and Check Valves, Lined, to Manufacturers

PMRC MAR VA/138
Standard, Flanged
Gate Valves (Additional Requirements to API 603) PMRC MAR VA/139
Valves in High Temperature Services PMRC MAR VA/140
5.3 PROJECT SPECIFICATION AND PROCEDURES
No Document Title Specification Doc No
Piping Wall Thickness Calculation for

1. TOSP-P038-EXE-DEC-3900-PIP-CAL-0001
Scope 1
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Piping Wall Thickness Calculation for

2. TOSP-P038-EXE-DEC-6335-PIP-CAL-0003
Scope 2
Specification for Piping Layout and
3. TOSP-P038-EXE-DEC-0001-PIP-SPN-0002
Installation
4. Specification for Stress Analysis TOSP-P038-EXE-DEC-0001-PIP-SPN-0005
5. Specification for Piping Pressure Testing TOSP-P038-EXE-DEC-0001-PIP-SPN-0007
Specification for Pipe Supports and Rod

Hangers
7. Pipe Support Standard Drawing for Scope 1 TOSP-P038-EXE-DEC-3900-PIP-DWG-0005
8. Pipe Support Standard Drawing for Scope 2 TOSP-P038-EXE-DEC-6335-PIP-DWG-0005
Specification for Piping Construction

Standard
10. Specification for Piping Design Standard TOSP-P038-EXE-DEC-0001-PIP-SPN-0013
Specification for Glass-Fibre Reinforced

Plastic Pipeline and Piping System
12. Specification for Painting and Coating TOSP-P038-EXE-DEC-0001-MCI-SPN-0001
13. Line List (Interconnecting) TOSP-P038-EXE-DEC-3900-PRO-LST-0002
14. Line List Effluent Treatment Plant (ETP) TOSP-P038-EXE-DEC-6335-PRO-LST-0003
5.4 RAPID PROJECT SPECIFICATION
Project Specification - Piping Class

1. Summary - Refinery and Utilities Piping RAPID-FE1-TPX-PIP-DES-0001-0021
Classes
Project Specification - Piping Class
2. RAPID-FE1-TPX-PIP-DES-0001-0023
Specification for Refinery & Utilities
3. Design Basis - Utilities Conditions RAPID-FE1-TPX-PRO-DES-0001-0001
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Corrosion Design Basis Memorandum

4. (CDBM) for RAPID Package 14 Utilities, RAPID-P0014-0049-MCI-ERP-0001-0003
Interconnecting, and Offsite (UIO)
Project Specification – Non Metallic
Materials - Selection & Application
5. RAPID-P0014-OUI-MCI-DES-0001-9005
(Supplement to PTS 30.10.02.13 Dated
Oct. 2009)
Project Specification – Metallic Materials
- Prevention of Brittle Fracture
Oct. 2009)
Project Specification – External
Polyethylene and Polypropylene Coating
of Line Pipe (Supplement to PTS
31.40.30.31 Dated Jan. 2010)
Project Specification – External Fusion-
Bonded Epoxy Powder Coating for Line
Pipe (Supplement to PTS 31.40.30.32
Dated Feb. 2009)
Project Specification – Carbon Steel
9. Piping and Equipment in "WET H2S" RAPID-P0014-OUI-MCI-SPN-0001-0002
Service
Project Specification – Welding of Metals
10. (Supplement to PTS 30.10.60.18 Dated RAPID-P0014-OUI-MCI-SPN-0001-0101
Oct. 2011)
Project Specification – Oxidation of
11. Stainless Steel Weldments (Supplement RAPID-P0014-OUI-MCI-SPN-0001-0102
to PTS 30.10.60.31 Dated Dec. 2010)
Project Specification – Radiographic
12. Inspection (Supplement to PTS RAPID-P0014-OUI-MCI-SPN-0001-0104
71.00.08.30 Dated Sept. 2009)
Project Specification – Ultrasonic
13. Examination (Supplement to PTS RAPID-P0014-OUI-MCI-SPN-0001-0105
71.00.08.31 Dated Jan. 2009)
Project Specification – Gaseous Oxygen
14. Systems (Supplement to PTS RAPID-P0014-OUI-MEC-DES-0001-0202
31.10.11.31 Dated Jan. 2010)
Project Specification – Electroless Nickel
Plating (Amendments/Supplement to
15. RAPID-P0014-OUI-MEC-DES-0001-9005
ASTM B 733) (Supplement to PTS
30.48.41.31 Dated Feb. 2009)
Project Specification – Metallic Materials
- Selected Standards (Supplement to
16. RAPID-P0014-OUI-MEC-SPN-0001-0103
PTS 30.10.02.11 Dated December
2010)
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Project Specification – Basis of Design

17. (Supplement to PTS 31.38.01.10 Dated RAPID-P0014-OUI-PIP-DES-0001-9013
Aug. 2011)
Project Specification – Piping Classes -
18. Refining and Chemicals (Supplement to RAPID-P0014-OUI-PIP-DES-0001-9015
PTS 31.38.01.12 Dated Oct 2011)
Refining and Chemicals – Class 150
19. RAPID-P0014-OUI-PIP-DES-0001-9016
(Supplement to PTS 31.38.01.12A
Dated Jan 2010)
(Supplement to PTS 31.38.01.12B
Dated Jan 2010)
(Supplement to PTS 31.38.01.12C
Dated Jan 2010)
(Supplement to PTS 31.38.01.12D
Dated Jan 2010)
(Supplement to PTS 31.38.01.12E
Dated Jan 2010)
(Supplement to PTS 31.38.01.12F
Dated Jan 2010)
Project Specification – Standard Form:
Piping Classes - Services And Materials
Selection Index (Supplement to PTS
31.38.01.84 Dated Feb. 2010)
26. GRE piping system RAPID-P0014-OUI-PIP-DES-0001-9023
RAPID Package 14 Piping Material

27. RAPID-P0014-OUI-PIP-SPN-0001-0019
Specification
28. Controlled Bolt Tightening RAPID-P0014-OUI-PIP-SPN-0001-0046
29. Piping Commodity Catalogue RAPID-P0014-OUI-PIP-SPN-0001-0048
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Project Specification – Positive Material

30. Identification for Piping and Instrument RAPID-P0014-OUI-PIP-SPN-0001-0049
Components
OUI Summary of Heat Treatment,
Destructive and Non Destructive
Examination Requirements for Welded
Piping
Liquid-Epoxy Coatings for External Repair
32. and Weld Joints on Underground Steel RAPID-P0014-OUI-PIP-SPN-0001-0055
Piping
Project Specification – Human Factors
33. Engineering Valve Analysis (Supplement to RAPID-P0014-OUI-PIP-SPN-0001-9001
PTS 30.00.60.13 Dated May 2004)
Project Specification – Shop And Field
34. Fabrication of Piping (Supplement to PTS RAPID-P0014-OUI-PIP-SPN-0001-9008
31.38.01.31 Dated Dec. 2010)
Project Specification – Piping General
Requirements Project Specification – Basis of
Design (Supplement to PTS 31.38.01.10
Dated Aug. 2011)
Project Specification – Piping Design
36. RAPID-P0014-OUI-PIP-STD-0001-0001
Standard
Basis of Design Definition of Temperature
Pressure and Toxicity Levels
37. RAPID-P0014-OUI-PRO-DES-0001-0041
Jan. 2010)
RAPID Package 16A Piping Material
38. RAPID-P016A-VMW-PIP-SPN-6301-1001
Specification
5.5 DEVIATION REQUEST
Document Title Specification Doc No
Use of API 5L Gr. B ERW/SAW Pipes for Sizes 6”

RAPID-P0024-PMC-PIP-PDR-0001-0003
to 24” up to 600# for Non- Hydrocarbon Service
Deviation request related to Coating of Bolts

RAPID-P0024-PMC-PIP-PDR-0001-0004
and Nuts
Use of AWWA Fittings and Flanges in Water

RAPID-P0014-OUI-PIP-PDR-0001-0003
Services
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Exemptions to Mandatory Post Weld Heat

RAPID-P0014-OUI-PIP-PDR-0001-0019
Treatment
5.6 TECHNICAL QUERY
Usage of Mitre Bends for Cooling Water RAPID-P0014-OUI-ENG-TEQ-0001-5067

Systems
5.7 STANDARD DRAWINGS

The latest revisions of listed standard drawings below can be found as an attachment in
Project Specification – Piping Construction Standard TOSP-P038-EXE-DEC-0001-PIP-SPN-
0012.
Document Title Std Dwg No
Fabrication Drawing for Underground Cooling

Water Prefabricated Pipe Spools for U4710 and RAPID-P0014-OUI-PIP-DWG-0001-5000
U4720
Spade and Spacer Ring for AWWA Class E

RAPID-P0014-OUI-PIP-DWG-0001-5005
Flanges Above DN 1200
Fabrication Drawing for Oil Skimming Lines

U4710, U4720 and U4750
Line Blanks and Spacers for ASME BPVC SEC

VIII-1 Flanges at DN 1600
Y-Type Strainers, ASME Classes 150 and 300 PTS D12.92.301-M
Bucket-Type Suction Strainers Carbon Steel,

PTS D12.92.302-E
ANSI Class 150
Sieve for Y-Type Strainer PTS D12.92.303-F
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Document Title Std Dwg No
Spectacle Blinds for ASME Flanges PTS D12.92.305-P
Temporary Strainer for Compressors PTS D12.92.310-E
Spade Blinds for ASME Flanges PTS D12.92.311-L
Branch Fittings PTS D12.92.331-C
High Pressure Welding Thermowell for Piping

PTS D12.92.338-C
System DN 50
Flanged Thermowell DN 40 ASME Classes up to

PTS D12.92.339-A
1500 Incl.
Flanged Thermowell DN 50 ASME Classes up to

PTS D12.92.340-A
2500 Incl.
Orifice Flanges, Raised Face, With Flange

Tappings. ASME Classes 300 to 2500 incl., Nom. PTS D12.92.343-F
Size DN 50 to DN 600 incl.
Orifice Meter Runs With Flanged Ends, ASME
Classes 150 to 1500 incl., Nom. Size DN15 to PTS D12.92.346-C
DN40 incl.
5.8 AMERICAN STANDARDS

ASTM standards to be specified in the purchase descriptions, where applicable.
Document Title Document No
Check Valves: Flanged, Lug, Wafer, and Butt-

API 594 (Jul 2017)
welding
Valve Inspection and Testing API 598 (Oct 2016)
Metal Plug Valves – Flanged, Threaded and

API 599 (Mar 2020)
Welding Ends
Steel Gate Valves – Flanged and Butt-welding
API 600 (May 2021)
Ends, Bolted Bonnets
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Steel Gate, Globe, and Check Valves for Sizes

NPS 4 (DN 100) and Smaller for the Petroleum API 602 (May 2015)
and Natural Gas Industries
Corrosion-resistant, Bolted Bonnet Gate Valves
API 603 (Sept 2018)
– Flanged and Butt-welding Ends
Fire Test for Quarter-turn and Valves Equipped
API 607 (June 2016)
with Nonmetallic Seats
Metal Ball valves - Flanged, Threaded, and
API 608 (Jan 2020)
Welding Ends
Butterfly Valves: Double-flanged, Lug- and
API 609 (Apr 2021)
Wafer-type
Specification for Line Pipe API SPEC 5L (Apr 2018)
Specification for Pipeline Valves API SPEC 6D (Aug 2014)
Rules for Construction of Pressure Vessels ASME / BPVC SEC VIII-1 (Jul 2021)
Unified Inch Screw Threads (UN and UNR

ASME B1.1 (2019)
Thread Form)
Pipe Threads, General Purpose (Inch) ASME B1.20.1 (2013)
Pipe Flanges and Flanged Fittings ASME B16.5 (2020)
Factory-Made Wrought Buttwelding Fittings ASME B16.9 (2018)
Face-to-Face and End-to-End Dimensions of

ASME B16.10 (2017)
Valves
Forged Fittings, Socket-Welding and Threaded ASME B16.11 (2016)
Metallic Gaskets for Pipe Flanges ASME B16.20 (2017)
Nonmetallic Flat Gaskets for Pipe Flanges ASME B16.21 (2016)
Buttwelding Ends ASME B16.25 (2017)
Valves – Flanged, Threaded and Welded End ASME B16.34 (2020)
Orifice Flanges ASME B16.36 (2020)
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Large Diameter Steel Flanges ASME B16.47 (2020)
Line Blanks ASME B16.48 (2020)
Square, Hex, Heavy Hex, and Askew Head Bolts

and Hex, Heavy Hex, Hex Flange, Lobed Head, ASME B18.2.1 (2012)
and Lag Screws (Inch Series)
Nuts for General Applications: Machine Screw Nuts,
Hex, Square, Hex Flange, and Coupling Nuts ASME B18.2.2 (2015)
(Inch Series)
Process Piping ASME B31.3 (2020)
Welded and Seamless Wrought Steel Pipe ASME B36.10M (2018)
Stainless Steel Pipe ASME B36.19M (2018)
Steel Water Pipe – A Guide for Design and

AWWA M11 (2016)
Installation
Fiberglass Pipe Design AWWA M45 (2013)
Steel Pipe Flanges for Waterworks Service,

Sizes 4 in. through 144 in. (100 mm through AWWA C207 (2018)
3,600 mm)
Dimensions for Fabricated Steel Water Pipe
AWWA C208 (2017)
Fittings
Fiberglass Pressure Pipe AWWA C950 (2020)
Standard Marking System for Valves, Fittings,

MSS SP-25 (2018)
Flanges, and Unions
Steel Pipeline Flanges MSS SP-44 (2019)
Quality Standard for Steel Castings for Valves,

Flanges, Fittings, and Other Piping Components:
MSS SP-55 (2011)
Visual Method for Evaluation of Surface
Irregularities
High-Strength, Wrought, Butt-Welding Fittings MSS SP-75 (2019)
Swaged Nipples and Bull Plugs MSS SP-95 (2018)
Integrally Reinforced Forged Branch Outlet

Fittings – Socket Welding, Threaded, and MSS-SP-97 (2019)
Buttwelding Ends
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Petroleum, petrochemical and natural gas

industries - Metallic materials resistant to sulfide
NACE MR0103 / ISO 17945 (2015)
stress cracking in corrosive petroleum refining
environments
Evaluation of Pipeline and Pressure Vessel
Steels for Resistance to Hydrogen-Induced NACE TM0284 (2016)
Cracking
Standard for the Installation of Stationary
NFPA 20 (2019)
Pumps for Fire Protection
Butterfly Valves for Fire-Protection Service UL 1091 (2004)
ASTM Standards Annual Book of ASTM Standards (2021)
5.9 BRITISH / INTERNATIONAL STANDARDS
Steel check valves (flanged and butt-welding ends) for the

BS 1868 (2010)
petroleum, petrochemical and allied industries
Steel globed and globe stop and check valves (flanged and
buttwelding ends) for petroleum, petrochemical and allied BS 1873 (2018)
industries
Metallic Products – Types of Inspection Documents BS EN 10204 (2019)
Industrial Valves - Diaphragm Valves Made of Metallic

BS EN 13397 (2002)
Materials
Bolted bonnet steel gate valves for the petroleum,

BS EN ISO 10434 (2020)
petrochemical and allied industries
Plastic piping systems for industrial applications –

Acrylonitrile-butadienestyrene (ABS), unplasticized
poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl BS EN ISO 15493 (2017)
chloride) (PVC-C) – Specifications for component and the
system – Metric series
Steel gate, globe and check valves for sizes DN 100 and
BS EN ISO 15761 (2020)
smaller, for the petroleum and natural gas industries
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Metal ball valves for petroleum, petrochemical and allied

BS EN ISO 17292 (2020)
industries
Industrial valves — Pressure testing of metallic valves BS ISO 5208 (2020)
Steel and Steel Products – Inspection Documents ISO 10474 (2013)
Petroleum and natural gas industries — Pipeline

ISO 14313 (2007)
transportation systems — Pipeline valves
5.10 ORDER OF PRECEDENCE

In case of conflict between Laws, Project Specifications and Codes & Standards, the following
order of precedence shall be considered:
1. Malaysian Laws and applicable regulatory requirements,
2. Project Specifications and supplemented PTS,
3. Applicable Malaysian Codes and Standards,
4. Applicable International Codes and Standards.
If a lower level requirement is more stringent than an upper one in the above documents, a
request shall be raised to OWNER for written decision before proceeding with the design,
manufacture or construction.
6.0 TERMINOLOGY
6.1 BASE CODE
Piping systems in this specification are designed in accordance with ASME B31.3 for metallic
piping and RAPID-P0014-OUI-MCI-DES-0001-9005 for non-metallic piping.
6.2 DESIGN CONDITIONS

Unless otherwise specified, pressures and temperatures refer to design conditions whichever
are the most severe conditions to which the piping systems may be subjected. The following
may determine the design conditions:
• Surge pressure;
Open
OWNER Doc No. :
INTEGRATED COMPLEX
• Pump shut-off pressure;

• Static pressure;
• Pressure drop;
• Vacuum caused by cooling and possible condensing of trapped medium;
• Nitrogen purge pressure;
• Settling pressure of compressor;
• Emergency depressurization
• Possibility of temperature rise due to stagnancy
6.3 PRESSURE-TEMPERATURE RATINGS

Pressure-temperature ratings shall be based on ASME B16.5 table 2. This may, however, be
limited by the allowable stress of bolting materials and the ASME B31.3 allowable internal
pressure as indicated in the specific pipe classes.
6.4 CORROSION ALLOWANCE

Corrosion allowance is as specified in the individual pipe classes.
6.5 PIPE WALL THICKNESS

Unless otherwise specified, all piping component wall thicknesses specified in the individual
line classes or indicated on P&ID’s or drawings, are based only on design considerations of
pressure, temperature, and allowances for corrosion, erosion, manufacturer's minus
tolerance and any allowance for the depth of threads or grooves.
Piping component wall thicknesses do not include additional thickness that may be required
to compensate for design considerations such as thermal loads due to restraints, live loads,
hydraulic shock, or loads and sources from other causes, all of which must be considered in
the design of piping systems.
Refer to TOSP-P038-EXE-DEC-3900-PIP-CAL-0001 (Piping all Thickness Calculation For Scope

1) and TOSP-P038-EXE-DEC-6335-PIP-CAL-0003 (Piping all Thickness Calculation For Scope
2) for the validation of the specified piping wall thickness under internal and external pressure
covered in the project piping classes.
6.6 BRANCH CONNECTIONS

In each piping class, the branch table is established in order to select the proper and most
economical type of branch connection for the design limits of the piping class. Branch fittings
Open
OWNER Doc No. :
INTEGRATED COMPLEX
or buttweld fittings are specified for all branch connections where a pipe-to-pipe branch would
need additional reinforcement.
6.7 VACUUM CONDITIONS

Unless otherwise specified, the pipe class design pressures are positive internal pressure.
Piping subject to sub-atmospheric pressure shall be designed for full or half vacuum. A
statement indicating the suitability for vacuum at specific temperature has been incorporated
in the notes section of each pipe class.
6.8 SOUR / WET H2S SERVICE

6.8.1. Carbon steel materials selected for wet H2S service piping classes shall conform
to the requirements specified in the project specification RAPID-P0014-OUI-MCI-
SPN-0001-0002 for Refinery piping classes (PTS/base, derived and project piping
class). For Licensor piping classes, the wet H2S service shall be compliant with
each Licensor wet H2S requirements.
6.8.2. Stainless steel materials selected for wet H2S service piping classes shall comply
with the requirements in NACE MR0103.
6.8.3. Valve materials selected for wet H2S service piping classes shall be subject to
the requirements of NACE MR0103.
6.9 PIPE CLASS

A piping class is a specification consisting of a collection of standardized piping components
that are compatible and are suitable for a defined service at stated pressure and temperature
limits. All components applied in piping classes are covered by PMRC datasheet.
The numbering system of the UIO piping classes shall be as follows:
AA B CCC DD
Notes:
1. Pressure Rating Code Identifier: 2. PMRC Material Code Identifier:

150# = 1 C = Carbon Steel
300# = 3 L = Low and Intermediate Alloy Steels
Open
OWNER Doc No. :
INTEGRATED COMPLEX
600# = 6 S = Stainless Steel

900# = 9 A = Aluminum and Aluminum Alloys
1500# = 15 P = Copper and Copper Alloys
2500# = 25 B = Nickel and Nickel Base Alloys
N = Non-metallic Materials
G = Carbon Steel, Lined or Galvanized
3. Running number is arbitrary; 001 to 099 shall not be used. Specific block numbers
are assigned for Project specific piping classes. See sec. 6.9.3.
4. For base Piping Class, the Derived Piping Class Identifier Code shall be blank.
Specific identifiers are assigned for the derived piping classes. See sec. 6.9.2.
The UIO piping classes are classified into three types: base, derived, and project specific.
6.9.1. The base (downstream) piping classes are specified as per applicable PMRC
piping classes in accordance with RAPID-P0014-OUI-PIP-DES-0001-9015. These
base specifications have been developed by using the most suitable materials in
view of fitness for purpose, international / national / industry standards, and
availability and commercial aspects.
6.9.2. Derived piping classes are created when there are “minor” changes to the base
piping classes (e.g. extended pipe sizes, change in corrosion allowance,
additional valve type, specific design conditions, etc.). Deviations shall be
supported with technical calculations on the pipe and piping components in
accordance to AMSE B31.3 requirements and relevant applicable standards.
Derived piping class identifiers are assigned upon confirmation with PMRC team.
The identifiers assigned are as per Appendix 1 Piping class selection table for
(Scope 1: Interconnecting) and Appendix 3 Piping class selection table for
(Scope 2: ETP Plant).
As per RAPID-P0014-OUI-PIP-DES-0001-9013, the following suffixes can be

added after the assigned identifier to indicate a process service related selection
of impact tested and non-impact tested material in carbon steel piping classes:
• “-KS” - Impact tested material selection for application down to -20°C. These
piping classes have been developed for liquid butane, LPG and compressed
light and flammable gases such as hydrogen, methane, ethane, propane and
ethylene.
• “-20” - Piping Class material selection in line with ASME B31.3 Fig. 323.2.2A
curve B for application down to -20°C for service not mentioned above.
6.9.3. Project piping classes shall be developed if the project requirements are not
covered by the downstream piping classes. The project requirements have
“major” changes from the base piping classes such as different piping material,
ASME rating class, etc.
The block numbers shall be assigned based on confirmation with PMRC team.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.0 MATERIALS AND DESIGN

7.1 PURCHASE SPECIFICATIONS
7.1.1. Materials
7.1.1.1. Carbon Steel
For selected Carbon Steel material (ASTM A105, A 106 Grade B, A 234 Grades
WPB or WPBW, and A 672 Grade C65), the carbon content shall not exceed
0.23% and Carbon Equivalent (CE) supplementary requirement shall apply,
with values not exceeding 0.43.
All API 5L pipes shall be as per pipe grade Product Specification Level (PSL)
2.
Galvanizing of Carbon Steel materials shall be in accordance with the following

ASTM standards:
Material Standard Galvanizing Standard

A105 and A234 ASTM A153
API 5L ASTM A53
7.1.1.2. Low Temperature Carbon Steel
For selected Low Temperature Carbon Steel material (A 333 Grade 6, A350
Grade LF2, Class 1, A 420 Grades WPL6 and WPL6W, and A 671 Grade CC65,
Class 22), the carbon content shall not exceed 0.23% and Carbon Equivalent
(CE) supplementary requirement shall apply, with values not exceeding 0.43.
These materials shall have impact test results as per applicable PMRC MAR.
7.1.1.3. Stainless Steel
For pipes, fittings and flanges furnished to Grade 316, the carbon content
shall not exceed 0.03%.
7.1.1.4. Glass-fiber Reinforced Piping (GRP)
The requirements for GRP pipes, fittings and flanges shall be in accordance
with RAPID- P0014-OUI-PIP-DES-0001-9023 and TOSP-P038-EXE-DEC-
0001-PIP-SPN-0016.
7.1.1.5. Polyvinyl Chloride (PVC)
Open
OWNER Doc No. :
INTEGRATED COMPLEX
PVC pipes, fittings and flanges shall be designed and manufactured in

accordance with standard EN ISO 15493. PVC materials shall be as per RAPID-
P0014-OUI-MCI-DES-0001-9005.
7.1.1.6. High-Density Polyethylene (HDPE)
HDPE materials shall be furnished in accordance with RAPID-P0014-OUI-MCI-

DES-0001-9005
7.1.2. Components
7.1.2.1. Pipe, Fittings, and Flanges
Purchase specification of pipe, fittings, and flanges shall conform to specific

Petronas requirements listed in PMRC datasheet.
7.1.2.2 Valves
Valves shall conform to the general requirements of PMRC MAR VA/122 and
the applicable standards listed therein.
Valves shall also conform to any mandatory or additional requirement listed

in each item’s purchase specification listed in PMRC MAR database.
7.1.2.3 Miscellaneous Piping Components
Purchase specifications for bolts, nuts, and gaskets shall conform to specific
Petronas requirements listed in the PMRC datasheet.
7.2 PIPING CLASSES AND COMPONENTS

7.2.1. Out-of-Spec Items
Piping components not listed in the individual pipe classes of this specification
but allow for design conditions as per applicable pipe class conditions shall be
considered out-of specification components.
7.2.2. Specialty Items
Piping components not listed in sections 7.3 through 7.10 or components which
allow for design conditions lower than the applicable pipe class conditions shall
be treated as specialty items, which shall be identified with a tag number on the
P&ID and in a Specialty Item List.
The Special Piping Material shall be identified as per the numbering procedure
specified in the project procedures RAPID-P0014-OUI-ENG-PRC-001-6004 and
RAPID-P0014-OUI-PMG- PRC-0001-1004. The tag number shall be as follows:
Open
OWNER Doc No. :
INTEGRATED COMPLEX
The
appropriate “Function” code for Specialty items shall be “SP”.
Dampers in Vent Gas lines, strainers in pump suction lines, pressure and Vacuum
relief valves, flow control valves, Self- Pressure regulating valve, Temperature
safety valve, Steam traps, Hose couplings & Flame Arrestors are considered
Specialty Items.
7.3 VALVE
For detailed specifications and requirements for manual valves, refer to TOSP-P038-
EXE-DEC-0001-PIP-SPN-0003 Specification for Manual Valves.
7.4 PIPE
7.4.1. Materials and Design
For metallic pipe, reference is made to RAPID-P0014-OUI-MEC-SPN-0001-0103

and ASME B31.3. Dimensions of steel pipe shall conform to the requirements of
ASME B36.10M and ASME B36.19M, as applicable.
For the selection of non-metallic pipe, reference is made to RAPID-P0014-OUI-

MCI-DES-0001-9005.
7.4.2. Dimensions
The following pipe size shall be used:
DN 15, DN 20, DN 25, DN 40, DN 50, DN 80, DN 100, DN 150, DN 200, DN 250,
DN 300, DN 350, DN 400, DN 450, DN 500 and DN 600 in accordance with the
following limitations.
• Due to their vulnerability to damage and their limited mechanical strength,

sizes DN 15 and DN 20 should not be used for long-run piping.
• Pipe sizes between those given in the piping classes shall not be used.
Unless economically justified otherwise, the range of pipe sizes above DN 600
shall be restricted to the following, in order to avoid the purchase of many
different sizes of pipe and fittings: DN 750, DN 900, DN 1050, DN 1200, DN
1400, DN 1600, DN 1800, DN 2000, DN 2250, DN2500, DN 2750, DN 3000, DN
3250, and DN 3500.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Non-standard sizes shall not be utilized unless otherwise used for interface tie-
in connections or when approved by piping material engineer.
7.4.3. Thickness
Selection of wall thickness for Carbon Steel, Loy Alloy Steel, and Intermediate
Alloy Steel pipe shall follow ASME B36.10M. Only wall thickness’ with
‘Identification’, e.g. Standard (STD), Extra-Strong (XS), Double Extra-Strong
(XXS) or a Schedule No., are to be selected.
Selection of wall thickness for Stainless and High Alloy steel shall follow
ASME B36.19M. Where calculated wall thickness is in excess of ASME B36.19M,

selection shall follow the requirements of section 6.4.3.3 below.
Selection of wall thickness for pipe diameters larger than DN 600 shall follow
the selected standard wall thicknesses in millimeters in accordance with ASME
B36.10M:
7.92 8.74 9.53 10.31 11.13 11.91 12.7

14.27 15.88 17.48 19.05 20.62 22.23 23.83
25.4 26.99 28.58 30.16 31.75 32 34
36 38 40 42 44 46 48
50 52 54 56 58 60 62
For carbon steel, sizes in bold have not been used.
7.5 FITTINGS
Fittings shall be in accordance with ASME B16.9 for sizes up to DN 1200, MSS SP-75 for sizes
greater than DN 1200 up to DN 1400, and AWWA C208 for sizes ≥ DN 1600 for water services
only. For sizes ≥ DN 1600 to be used for other services, design shall be as per ASME B16.9
or MSS SP-75 and meets the requirements of ASME B31.3 for the pressure design of unlisted
components.
Fittings shall be fabricated from material with the same mechanical and chemical properties
as the pipe to which they are connected.
7.5.1. For butt welding end fittings, the schedule or wall thickness shall be specified as
per thickness of the connecting pipes.
7.5.2. Reducing elbows, straight crosses and reducing outlet crosses are regarded as
special fittings and should be avoided.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.6 PIPE BEND

7.6.1. Bending of pipe spools may be considered as an alternative to using welded
elbows subject to Owner’s approval. Pipe bending shall comply with ASME B31.3
7.6.2. Piping system which is subjected to the pipe bend shall be listed with the
approval of the OWNER.
7.6.3. Pipe bending at site should be restricted to DN50 and below only.
7.6.4. Pipe bending shall be performed in accordance with Project Specification for Shop
and Field Fabrication of Piping (TOSP-P038-EXE-DEC-0001-PIP-SPN-0026).
7.6.5. Mitre bends may only be used in ASME rating class 150 and with the approval of
the OWNER.
7.6.6. Mitre bends shall be calculated according to ASME B31.3.
7.7 BRANCH CONNECTIONS

Fittings shall be fabricated from the material with the same mechanical and chemical
properties as the pipe to which they are connected.
7.7.1. Branches should be connected at 90° to the run pipe.

7.7.2. Butt-welding tees should be used for branches equal in diameter to the run pipe.
Butt- welding tees with equal or reducing outlets should be used for services
where flow disturbance is to be minimized.
7.7.3. Where available, butt-welding tee fittings shall be used in severe cyclic service
(as defined in ASME B31.3).
7.7.4. Economic aspects and service conditions shall be considered in the selection of
the reinforcing method. Additional reinforcement may be required after
evaluation by piping stress engineer. Reinforcement material shall have the
same mechanical properties and P-number or S-number group as the header
material.
7.7.5. Branch connections shall not be made on elbows or concentric reducers. Branch
connections should not be made on eccentric reducers or tees but may be made
if the branch is maximum DN 40 and the run-size of the fitting at the branch
position is minimum DN 150. On eccentric reducers the branch shall be located
at the flatside of the reducer. On tees the branch shall be located opposite the
main branch of the tee.
7.7.6. For 90° branch connections size DN 40 and below in non-coated or non-lined
carbon steel piping classes, flanged branch fitting outlets shall be utilized in lieu
of plain end branch outlet fittings.
7.7.7. For high H2S percentage service, pipe to pipe (reinforced and unreinforced)
branch connections shall not be used. Use tees or weldolets instead.
7.7.8. Branch fittings shall be as per standard drawing PTS D12.92.331 – Branch
Fittings. Other specific requirements of branch fittings shall be in accordance
with PMRC MAR FF/103.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.8 FLANGES
7.8.1. Flanges through DN 600 shall be in accordance with ASME B16.5. Flanges over
DN 600 up to DN 1500 shall be in accordance with ASME B16.47 series A. Flanges
with sizes ≥ DN 1600 shall be in accordance with either AWWA C207 (for water
services only) or ASME BPVC Section VIII. The use of other types of flanges is
subject to the approval of the OWNER.
7.8.2. The flange facing finish shall be in accordance with ASME B16.5, ASME B16.47,
ASME BPVC Section VIII or AWWA C207 as applicable.
7.8.3. Flange bolt holes shall straddle the center lines on horizontal lines and
North/South axis on vertical lines.
7.8.4. Flanges shall be raised-face in accordance with ASME B16.5, ASME B16.47, or
calculated in accordance with ASME BPVC Section VIII, as applicable. If a flat
face flange is required (e.g. GRE piping in ASME rating class 150), the counter
flange shall also have a flat face in accordance with ASME B16.5 or ASME B16.47.
7.8.5. Flanges in accordance with AWWA C207 shall be flat face.
7.8.6. Flat face flanges shall be provided with full-face gaskets.
7.8.7. Lap joint stub ends shall be used only where shown in the individual pipe class;
they shall have the same facing as specified for flanges in the applicable pipe
class.
7.9 BOLTING
7.9.1. The design temperatures for the listed bolting material combinations in relation
to the applied piping material shall be as follows:
ALLOWABLE
BOLT MATERIAL NUT MATERIAL DIAMETER
PIPING DESIGN
[ASTM [ASTM RANGE
MATERIAL TEMPERATURE
DESIGNATION] DESIGNATION] [INCH]
RANGE [°C]
Carbon steel
Stainless steel A193-B7 A194-2H -40 to 400 1
/2 ≤ d ≤ 4
Non-metal
Carbon steel LT A320-L7 A194-4 -101 to 343 1/

2 ≤d≤4
Carbon steel LT
A320-L7M3) A194-7M -73 to 343 1/ ≤d≤4
(sour) 2
NOTES:
1. According to ASME B31.3, for externally-insulated flange connections the maximum design temperature may be equal to
the above maximum bolting temperatures.
2. According to ASME B31.3, for non-insulated components with fluid temperatures 65 °C and above the bolting temperature
shall not be less than 80 % of the fluid temperature.
3. Stud bolts to ASTM A320-L7M with sizes over 21/2 inch can be supplied with guaranteed mechanical properties as referenced
in ASME B31.3.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.9.2. Threading shall be in accordance with ASME B1.1, Class 2A for bolts, and Class
2B for nuts. The coarse thread series shall be applied for sizes 1 inch and smaller
and the 8 pitch (8UN) thread series for sizes 1 1/8 inch and above.
7.9.3. Bolt lengths shall be in accordance with the applicable piping code.
7.9.4. Bolt length measurement shall be based on the effective thread length. Bolts
shall extend at least one and a half thread past the end of the nut.
7.9.5. Where specified, bolts listed in section 7.8 shall be longer than one nut thickness
to permit the use of a bolt tensioner.
7.9.6. Where the hydraulic bolt tensioning is applied, bolt length shall be adjusted by
minimum one diameter longer for bolt tensioner. The applicable range of bolt
tensioning shall be as follows:
Open
OWNER Doc No. :
INTEGRATED COMPLEX
ASME Rating Tightening

Service Bolt Diameter
Classes Method
Critical All 1 inch and abov HBT
Others 1 1/4 inch and

All MTW
above
All Above 1 ¼ inch HTW
1 ½ inch and
Hydrogen ≥ #600 HBT
above
1 ½ inch and
All ≥ #1500 HBT
above
2 inch and
All All HBT
above
LEGENDS:
HBT: Hydraulic Bolt Tensioning
MTW: Manual Torque Wrench
HTW: Hydraulic Torque Wrench
7.9.7. Coating Requirement
Coatings are applied to improve the corrosion resistance of carbon and low alloy
steels when exposed to high level of humidity and marine environment.
Bolt and Nut Coating Coating Coating

Coating System DFT
Material Application Type Colour
1st coat – Ceramic

Yes Type-1 25-35 μ Silver
A193 B7/ Metal Coating
A194 Gr.2H
1st coat – Zinc Nickle
A193 B7M/
Plating 10-18 μ
A194 Gr.2HM Yes Type-2 Blue
2nd coat – PTFE 20-35 μ
Coating
1st coat – Zinc Nickle

A320 Gr.L7/ Plating 10-18 μ
Yes Type-2 Green
A194 Gr.4 2nd coat – PTFE 20-35 μ
Coating
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Finish coating material is either of the following in accordance with design

temperature of each piping class:
(a) Coating Type-1: Xylar 2 or equivalent (for piping class with max. design temp.
of > 200degC)
(b) Coating Type-2: Xylan 1070 or equivalent (for piping class with max. design
temp. of ≤ 200degC)
Basecoat (First Coat) - provides the corrosion resistance
PTFE Based Topcoat (Second Coat) - reduce friction when tightening and
loosening the bolting components which is not meant for primary corrosion
protection.
Surface preparation, coating application and other coating details shall be in

accordance with TOSP-P038-EXE-DEC-0001-MCI-SPN-0001.
7.10 GASKETS
7.10.1. Compressed Asbestos Fibre (CAF) and Man Made Mineral Fibres (MMMF) shall
not be used.
7.10.2. Gasket selection shall be based on piping class requirements. For uniformity, and
to prevent mistakes, all nozzles on a piece of equipment should be provided with
the same type of gasket. The most stringent design condition shall determine
the required gasket.
7.10.3. If graphite-sealing materials cannot be used, e.g. for product contamination
reasons, PTFE-based materials shall be applied up to a maximum temperature
of 200°C.
7.10.4. Flat Sheet Gaskets
Foil or expanded (tanged) metal reinforced graphite gaskets should be used.

Compressed asbestos fibre (CAF) sheet gaskets are not allowed. Alternatively
graphite filled, spiral wound gaskets can often be used. Where a flat face flange
is required, the counter-flange shall also have a flat face and full face gaskets
shall be applied.
7.10.5. Spiral Wound Gaskets
Spiral wound, AISI 316(L), graphite-filled gaskets shall be considered as the first
option for gasket selection for diameters up to DN 600. Spiral wound gaskets
shall always have inner rings to provide sufficient strength. Spiral wound
asbestos filled gaskets shall not be used.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
Spiral wound gaskets shall have a colour code in accordance with RAPID-P0014-
OUI- PIP-SPN-0001-9008 and BS 381C.
7.10.6. Covered Serrated Metal (Camprofile) Gaskets
For flanged connections above DN 600, covered serrated metal AISI-

316(L)/graphite gaskets with a lateral profile height shall be selected. Covered
serrated metal gaskets with a convex profile shall only be used in special cases,
e.g. if covered serrated metal gaskets with a lateral profile cannot provide an
adequate seal (e.g. in weak flanges or where the flange facing is not
perpendicular to the design plane). Metal grooved gaskets with a convex profile
may be used only if approved by the OWNER.
7.10.7. Insulation Gaskets
Insulation gaskets are used to prevent galvanic corrosion when two dissimilar
materials of construction are in contact. The cases where insulation gaskets are
required to be used are listed in the table below and are identified in the P&ID
as note. These approved criteria are taken from the CDBM – TOSP-P038-EXE-
DEC-0001-MCI-DES-0001.
CASE SERVICE
CS/LTCS-SS interface in pipe class breaks Water
Galvanized CS-SS interface in pipe class breaks Water
SS injection quill connection (from SS injection line) to CS piping

header Hydrocarbon
SS injection quill connection (from SS injection line) to LTCS

piping Hydrocarbon
Above ground / Underground metallic piping interface – due to

impressed the current cathodic protection All
7.10.8. Gasket List

Gasket details to be referred to Appendix 6 Gasket List. This gasket list provides
detail specifications with respect to the service and applicable piping class.
7.11 SPECTACLE BLINDS, SPACER RINGS & SPADES

7.11.1. Spectacle blinds, spades and spacer rings shall have the same ASME rating class
as the piping. For spectacle blinds, spades and spacer rings, see Standard
Drawings PTS D12.92.305, PTS D12.92.311 and PTS D12.92.312.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.11.2. If the required spades and spacer are outside the range of PTS D12.92.311 and
PTS D12.92.312, its outside diameter shall be equal to the raised face diameter
of the mating flange.
7.11.3. The dimensions of spades and spacer rings designed as per AWWA C207 shall
be in accordance with RAPID-P0014-OUI-PIP-DWG-0001-5005.
7.11.4. The dimensions of spades and spacer rings designed as per ASME BPVC Section
VIII-1 shall be in accordance with RAPID-P0014-OUI-PIP-DWG-0001-5010.
7.11.5. Spectacle blinds shall be limited to a weight of 25 kg. If the required force to
turn a spectacle blind exceeds 250 N, spades and spacer rings shall be used
instead.
The summary of size range per class rating that should be applied to line blanks
is tabulated below.
For Scope 1
Item 150# 300#
Spectacle Blind ≤ DN 250 ≤ DN 200
Spades and Spacer Rings > DN 250 > DN 200
For Scope 2
Item 150# 300#
Spectacle Blind ≤ DN 300 ≤ DN 250
Spades and Spacer Rings > DN 300 > DN 250
7.11.6. Spectacle blinds shall not be installed in pipes with operating temperatures below
0°C to prevent icing problems. Spectacle blinds should also not be installed at
places where the temperature is below the dew point to avoid excessive
condensation in high humidity locations. In both situations, spades and spacer
rings should be used instead of spectacle blinds.
7.12 THREADED JOINTS

Threaded joints shall not be used in any piping system handling flammable, toxic fluid,
process fluid or cyclic services condition unless otherwise approved by piping material
engineer.
Threaded joints may be used only in galvanized piping DN 50 and smaller. The minimum wall
thickness for these shall be Schedule 80. End connections shall be NPT pipe threads in
accordance with ASME B1.20.1.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
7.13 PIPE SUPPORT MATERIALS

For requirements of pipe supports, see project specifications TOSP-P038-EXE-DEC-0001-PIP-
SPN-0008.
7.14 PIPING ASSEMBLIES

Piping assemblies include vents and drains, pressure instruments, meter runs, orifices,
temperature instrument connections on piping.
The sketches of the assembly details and assemblies are shown in Appendix-3 Assembly
Details for Scope 1 and Appendix-6 Assembly Details for Scope 2.
8.0 MARKING
Marking which identifies the material, type and dimension of individual piping components
shall be accomplished in accordance with MSS SP 25.
9.0 INSPECTION AND TEST

Inspection and test for piping material component shall be as per applicable material
standards, project specifications and PTS.
Material certification shall be Type 3.1 in accordance with EN10204 and/or ISO 10474.
Material certification Type 3.2 shall be required for sour service and CRA materials.
9.1 METALLIC PIPING

Fabricated metallic piping shall be inspected and tested in accordance with ASME B31.3 and
Specification for Shop and Field Fabrication of Piping (TOSP-P038-EXE-DEC-0001-PIP-SPN-
0026)
9.2 NON METALLIC PIPING

For GFRP piping, refer to Project Specification for Glass-Fibre Reinforced Plastic Pipeline and
Piping System (TOSP-P038-EXE-DEC-0001-PIP-SPN-0016).
9.3 VALVE INSPECTION

Inspection and testing of valves shall be referred to Project Specification for Manual Valve
(TOSP-P038-EXE-DEC-0001-PIP-SPN-0003)
Open
OWNER Doc No. :
INTEGRATED COMPLEX
9.4 PRESSURE TESTS

All piping system shall be pressure tested in accordance with ASME B31.3 and Project
Specification for Piping Pressure Testing (TOSP-P038-EXE-DEC-0001-PIP-SPN-0007)
10 MATERIAL CODING
10.1 PMRC
Each piping class generation shall be based on PMRC piping class. All customized and new
piping classes shall be error free in PMRC system
Open
OWNER Doc No. :
INTEGRATED COMPLEX
10.2 INDEX OF PIPING CLASS
No. Scope Piping Class Rev. A Rev. B Rev. C Rev. 0
1 P14 1C101DF - 22/11/2021 17/01/2022 17/01/2022
2 P14 1C108DF - 22/11/2021 19/01/2022 17/03/2022
3 P14 1C108DG - 22/11/2021 24/02/2022 17/03/2022
4 P14 1C114DF - 16/11/2021 14/01/2022 14/01/2022
5 P14 1C119DF-20 - 22/11/2021 08/02/2022 08/02/2022
6 P14 1C136DF - 22/11/2021 10/01/2022 16/06/2022
7 P14 1C136DG - 15/11/2021 07/12/2021 07/12/2021
8 P14 1C136DH - 01/11/2021 10/02/2022 10/02/2022
9 P14 1C139DF - 10/11/2021 08/12/2021 31/05/2022
10 P14 1G100DF - 12/11/2021 03/03/2022 23/05/2022
11 P14 1G304 - 15/11/2021 03/03/2022 03/03/2022
12 P14 1N103DF - 19/11/2021 18/02/2022 18/02/2022
13 P14 1S105DF - 16/11/2021 30/11/2021 16/06/2022
14 P14 3C102DF-KS - 10/11/2021 14/01/2022 14/01/2022
15 P16A 1C103EE - 17/11/2021 15/02/2022 10/06/2022
16 P16A 1C108EE - 09/11/2021 09/11/2021 08/04/2022
17 P16A 1C114EE - 09/11/2021 09/11/2021 10/06/2022
18 P16A 1C127EE - 08/11/2021 16/12/2021 07/04/2022
19 P16A 1C136EE - 09/11/2021 16/02/2022 10/06/2022
20 P16A 1C136EF - 09/11/2021 17/02/2022 10/06/2022
21 P16A 1C136EG - 09/11/2021 28/02/2022 10/06/2022
22 P16A 1G100EE - 08/11/2021 01/12/2021 07/04/2022
23 P16A 1G340 - 08/11/2021 10/12/2021 07/04/2022
24 P16A 1N103EE - 19/11/2021 16/02/2022 10/03/2022
25 P16A 1N341 - 15/11/2021 22/12/2022 13/06/2022
Open
OWNER Doc No. :
INTEGRATED COMPLEX
No. Scope Piping Class Rev. A Rev. B Rev. C Rev. 0
26 P16A 1N342 - 03/11/2021 03/11/2021 Removed
27 P16A 1S341 - 02/11/2021 30/11/2021 10/06/2022
28 P16A 1S342 - 08/11/2021 25/02/2022 10/06/2022
Note:
1) Revision A is based on existing RAPID Project piping class based on P14 & P16A.
2) Revision B and above are based on derived piping class.
Open
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 1 - PIPING CLASS INDEX SUMMARY FOR SCOPE 1
Open
Appendix 1
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF

TITANIUM NBL OUTSIDE BATTERY LIMIT (N-OSBL) FACILITY PROJECT FOR PENGERANG INTEGRATED COMPLEX
PIPING CLASS INDEX SUMMARY FOR SCOPE 1
VALVES
Limitation VALVE
Design Condition ASME SIZE GATE GLOBE CHECK BALL BUTTERFLY CATEGORY A BUTTERFLY CATEGORY B MODIFICATION FROM
Reference Pipe Class Fluid Fluid Temp. Corr. FUGITIVE
No Scope Fluid Class Base Material Sour PWHT (DN) PIPE FITTING FLANGE GASKET BOLT COAT EXISTING RAPID PIPE Remarks
Pipe Class Rev.B Code Category Pressure (Min./Max) Allowance EMISSION
Temp [°C] Rating MAX. Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM CLASS (P14)
[barg] [°C] CLASS
1. No existing pipe class for 1. Bellow seal gate valves.

ACN line. Modified from 2. All valves are butt-welded
1C102AW. connection.
2. ERW pipe shall not be
used changed to SMLS
(<50) Piston check AISI 316/STELLITE 6
DN8-DN300, A106 Gr.B DN15-DN300, DN15-DN300, DN15-DN300, pipe.
1 P14 1C101DB 1C101DF Acrylonitrile ACN M 75 12 -20/200 150 A106 Gr.B NO 3.0 NO 300 TYPE-2 Rate A ≤300 AISI 316/Stellite 6 ≤300 AISI 316/Stellite 6 (50-250) Swing Check AISI 316/STELLITE 6 N/A N/A N/A N/A N/A N/A
SMLS BW WN camprofile 3. Pipe spec size range is
(300) Dual Plate Check AISI 316/STELLITE 6
reduced to suit project size
range
4. Valve trim is changed to
AISI 316/Stellite 6.
5.. 5D elbow is added.
used. Changed to SMLS
DN15-DN300, A106 Gr.B DN15-DN300, DN15-DN300, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-150 ) pipe.
2 P14 1C108DA 1C108DF LP Nitrogen LPN Normal 80 12 -20/400 150 A106 Gr.B NO 1.0 NO 300 DN15-DN300, SPW TYPE-2 Rate B (50-250) Swing Check AISI 410/STELLITE 6 AISI316/PTFE N/A N/A N/A N/A
SMLS BW WN (50-300) AISI 410/STELLITE 6 (50-200) AISI 410/STELLITE 6 Floating Ball 2. Pipe spec size range is
range
3 P14 1C108DC 1C108DG Plant Air PA Normal 75 12 -20/400 150 A106 Gr.B NO 3.0 NO 300 DN15-DN300, SPW TYPE-2 Rate B (50-250) Swing Check AISI 410/STELLITE 6 AISI316/PTFE N/A N/A N/A N/A
range
4 P14 1C114DA 1C114DF Fuel Gas FG Normal 80 7 -20/400 150 A106 Gr.B NO 3.0 NO 300 DN15-DN300, SPW TYPE-2 Rate B (50-250) Swing Check AISI 410/STELLITE 6 AISI316/PTFE N/A N/A N/A N/A
range
DN15-DN600, A333 Gr.6 DN15-DN1800,
LTCS (H-SOUR), (<50) Piston check used. Changed to SMLS
SMLS WN DN15-DN600, SPW AISI 316/Stellite 6 750-1600
1C119DF- A333 Gr.6 DN15-DN1800, (50-250) Swing Check LTCS/DUPLEX/ pipe.
5 P14 1C119DA-20 Petchem Flare PCF Normal -45/200 7 -46/400 150 YES 3.0 YES 1800 DN750-DN1800, A671 ASME B16.47 DN750-1800, TYPE-2 Rate B ≤600 AISI 316/Stellite 6 ≤200 AISI 316/Stellite 6 AISI 316/Stellite 6 N/A N/A N/A N/A (Double
20 A671 Gr. CC65 BW (300-900) Dual Plate STELLITE 2. Unrelated piping
Gr. CC65 CL.22 SAW series A > camprofile AISI 316/Stellite 6 flanged)
CL.22 Check component to this project
NACE TM0284 DN600
is removed.

(<50) Piston Check used. Changed to SMLS
AISI 316/STELLITE 6 (200-300)
Treated Water - DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check ≤600 SS/PTFE/ALY6 pipe.
6 P14 1C136DA 1C136DF WT Normal 75 17.5 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 Trunnion AISI316/PTFE N/A N/A
General SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6 Mounted
Dual Pl. reduced to suit project size
range
1. ERW pipe shall not be 1. Fugitive emission class for soft seat
(<50) Piston Check used. Changed to SMLS butterfly valve is not applicable for
AISI 316/STELLITE 6
DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check (50-150 ) ≤600 SS/PTFE/ALY6 pipe. water service application .
7 P14 1C136DA 1C136DF Service Water SW Normal 75 12 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A
SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check Floating Ball (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
range
AISI 316/STELLITE 6
Process Waste DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check (50-150 ) ≤600 SS/PTFE/ALY6 pipe.
8 P14 1C136DA 1C136DF PWN Normal 75 16 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A
Water SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check Floating Ball (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
range
AISI 316/STELLITE 6
DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check (50-150 ) ≤600 SS/PTFE/ALY6 pipe.
9 P14 1C136DA 1C136DF ACC Off-Spec PW Normal 75 16 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A
SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check Floating Ball (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
range
AISI 316/STELLITE 6
Utility Effluent - DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check (50-150 ) ≤600 SS/PTFE/ALY6 pipe.
10 P14 1C136DA 1C136DF UE Normal 75 16 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A
Blowdown SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check Floating Ball (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
range
AISI 316/STELLITE 6
Utility Effluent - DN15-DN600, A106 Gr.B DN15-DN600, DN15-DN600, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check (50-150 ) ≤600 SS/PTFE/ALY6 pipe.
11 P14 1C136DA 1C136DF UE Normal 75 16 0/100 150 A106 Gr.B NO 3.0 NO 600 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A
C/T Backwash SMLS BW WN (50) AISI 410/STELLITE 6 (50-400) AISI 410/STELLITE 6 (300-600) Lug Check Floating Ball (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
range
AISI 316/STELLITE 6
DN15-DN300, A106 Gr.B DN15-DN300, DN15-DN300, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check ≤300 SS/PTFE/ALY6 pipe.
12 P14 1C136DC 1C136DG ACC On-Spec ACC Normal 75 16 0/100 150 A106 Gr.B NO 6.0 NO 300 DN15-DN300, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A
SMLS BW WN (50) AISI 410/STELLITE 6 (50-200) AISI 410/STELLITE 6 (300) Lug Check Dual (Lug) 25 2. Pipe spec size range is
AISI 410/STELLITE 6
Pl. reduced to suit project size
range
1. Valves with UL/FM certification
shall be used where required (i.e. fire
water service or when indicated in
1. Existing spec 1C136DB P&ID).
was not found in PMRC 2. Fugitive emission class for soft seat
database. butterfly valve is not applicable for
Firewater DN80-DN400, Non-
A106 Gr.B 2. Modified based on water service application.
Above/ DN15-DN450, A106 Gr. DN15-DN450, Metal. Flat Gasket ≤400
13 P14 1C136DB 1C136DH FW Normal 75 16 0/80 150 A106 Gr.B (PE NO 3.0 NO 450 DN15-450, BW TYPE-2 N/A N/A N/A N/A N/A N/A N/A N/A N/A AISI316/EPDM N/A N/A 1C136 base pipe class 3. PE coated CS piping to be used for
Underground B SMLS WN/SO FF (EPDM) (Lug)
Coated) 3. Gasket type changed underground firewater branching for
(Partially) DN15-DN450, SPW
from full face EPDM rubber hydrant.
to non metal flat gasket 4. Non PE coated piping to be used
EPDM with O-ring. for aboveground piping as indicated in
the Isometric drawing.

DN15-DN1200,
DN15-DN600, A106 Gr.B (<50) Piston check used. Changed to SMLS
A106 Gr.B WN DN15-DN600, SPW AISI 316/STELLITE 6 750-1200
SMLS DN15-DN1200, (50-600) Swing Check CS/DUPLEX/ pipe.
14 P14 1C139DA 1C139DF LP Steam SL Normal 295 9 0/400 150 A672 Gr.C65 NO 1.0 NO 1200 ASME B16.47 DN750-1200, TYPE-1 Rate B ≤600 AISI 316/STELLITE 6 ≤400 AISI 316/STELLITE 6 AISI 316/STELLITE 6 N/A N/A N/A N/A (Double
DN 750-DN1200, A672 BW (750-1200) Dual Plate STELLITE 2. Unrelated piping
CL.22 series A > camprofile AISI 316/STELLITE 6 flanged)
Gr.C65 CL.22 SAW Check component to this project
DN600
is removed.
Page 1 of 2
Appendix 1

VALVES
Limitation VALVE
Design Condition ASME SIZE GATE GLOBE CHECK BALL BUTTERFLY CATEGORY A BUTTERFLY CATEGORY B MODIFICATION FROM
Reference Pipe Class Fluid Fluid Temp. Corr. FUGITIVE
No Scope Fluid Class Base Material Sour PWHT (DN) PIPE FITTING FLANGE GASKET BOLT COAT EXISTING RAPID PIPE Remarks
Pipe Class Rev.B Code Category Pressure (Min./Max) Allowance EMISSION
Temp [°C] Rating MAX. Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM CLASS (P14)
[barg] [°C] CLASS
DN15-DN50, A106 Gr.B 1. ERW pipe shall not be 1. Fugitive emission class for soft seat
SMLS Galv. DN15-DN50, DN15-DN50, used. Changed to SMLS butterfly valve is not applicable for
DN15-DN300, Non- (<50) Piston Check water service application .
API 5L Gr.B DN80-DN300, A106 Gr.B SCRD SCRD FF AL BRONZE/PTFE ≤150 Floating AL ≤300 AL pipe.
15 P14 1G100DA 1G100DF Potable Water WP Normal 75 14 0/90 150 NO 0.0 NO 300 Metal. Flat Gasket TYPE-2 Rate B N/A N/A ≤80 AL BRONZE/PTFE (80-300) Lug Check N/A N/A
Galv. (HOLD-1) SMLS (flanged prefab. DN80-DN300, DN80-DN300, AL BRONZE/PTFE Ball BRONZE/PTFE (Lug) BRONZE/PTFE 2. Pipe spec size range is
(PTFE) Dual Pl.
spools galv. as per ASTM BW WN FF reduced to suit project size
A53) range
DN15-DN50, A106 Gr.B
pipe.
API 5L Gr.B SMLS (flanged prefab.
DN15-DN300, Non- (<50) Piston Check 2. Pipe spec size range is
Galv. ≤ DN50 0.0 ≤ DN50 Spools galv. as per DN15-DN300, DN15-DN300, AL BRONZE ≤100 Floating AL ≤300
16 P14 1G301 1G304 Instrument Air IA Normal 75 12 0/75 150 NO NO 300 Metal. Sheet TYPE-2 Rate B N/A N/A 80-200 AISI 316/EPDM (80-500) Lug Check AISI 316/EPDM N/A N/A reduced to suit project size
API 5L Gr.B > 1.0 > DN50 ASTM A123) BW WN FF AISI 410/STELLITE 6 Ball BRONZE/PTFE (Lug)
Gasket (CNAF) Dual Pl. range
DN50 DN80-DN300, A106 Gr.B
3. Gasket material is
SMLS BW
changed from EPDM to
CNAF.
1. Valves with UL/FM certification

1. Existing spec 1N103DA
shall be used where required (i.e. fire
database is not available in
water service or when indicated in
PMRC.
DN25-DN600, GRVE DN25-DN600, P&ID)
GRVE DN25-DN600, Non- 2. Modified based on
Fire Water Bisphenol-A DN25-DN600, Butt and strap ≤600 AL 2. Fugitive emission class for soft seat
17 P14 1N103DA 1N103DF FW Normal 75 16 0/80 150 Bisphenol-A NO 0.0 NO 600 Metal. Flat Gasket TYPE-2 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1N103 base pipe class.
(Underground) DN200-DN500, A106 Butt and strap DN200-DN500, (Lug) BRONZE/EPDM butterfly valve is not applicable for
A106 Gr.B (EPDM) 3. Gasket type changed
Gr.B SO FF water service application .
from full face EPDM rubber
3. CS piping to be used only for
to non metal flat gasket
removable spool for PIV inside valve
EPDM with O-ring.
pit.
A312 DN15-DN300, A312 (<50) Piston check

AISI 316/STELLITE 6 (200-300) 1. Unrelated piping
Gr.TP316L Gr.TP316L SMLS DN15-DN600, DN15-DN600, (50-250) Swing Check
18 P14 1S105DC 1S105DF Demin Water DMW Normal 75 13 -20/400 150 NO 0.0 NO 600 DN15-DN600, SPW TYPE-2 Rate B ≤600 AISI 316/STELLITE 6 ≤400 AISI 316/STELLITE 6 AISI 316/STELLITE 6 Trunnion AISI316/PTFE N/A N/A N/A N/A component to this project
A358 Gr.316L DN350-DN600, A358 BW WN (300-600) Dual Plate
AISI 316/STELLITE 6 Mounted is removed.
CL.1 Gr.316L CL.1 Check
1. Unrelated piping 1. Bellow seal gate valves.
LTCS, A333 DN15-DN200, DN15-DN200, DN15-DN200, component to this project 2. All valves are butt-welded
19 P14 3C102DA-KS 3C102DF-KS Butadiene BD M -10/90 26.6 -20/150 300 NO 1.5 NO 200 DN15-DN200, A333 Gr.6 TYPE-2 Rate A ≤200 AISI 410/STELLITE 6 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Gr.6 BW WN camprofile is removed. connection.
2.. 5D elbow is added.
NOTE
1. Fugitive emission class for soft seat butterfly valve is not applicable for firewater water and potable water service application . Others, are govern by PMRC datasheet and as specified in the above table.
2. Lug type butterfly valves with lining extending over the flange facing shall be installed without gasket.
Page 2 of 2
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 2 - PIPE CLASS DETAIL FOR SCOPE 1
Open
Piping Material Specification
P_NOSBL
1C101DF
Carbon Steel [A], Class 150
Revision: 0
Issue Date : Jan 17, 2022
FOREWORD
PETRONAS Technical Standards (PTS) has been developed based on the accumulated knowledge, experience and best practices of the PETRONAS
group supplemented by national and international standards where appropriate. The key objective of PTS is to ensure standard technical practice across
the PETRONAS group.
Compliance to PTS is compulsory for PETRONAS-operated facilities and Joint Ventures (JVs) where PETRONAS has more than fifty percent (50%)
shareholding and/or operational control, and includes all phases of work activities.
Contractors/manufacturers/suppliers who use PTS are solely responsible in ensuring the quality of work, goods and services meet the required design
and engineering standards. In the case where specific requirements are not covered in the PTS, it is the responsibility of the
Contractors/manufacturers/suppliers to propose other proven or internationally established standards or practices of the same level of quality and
integrity as reflected in the PTS.
In issuing and making the PTS available, PETRONAS is not making any warranty on the accuracy or completeness of the information contained in PTS.
The Contractors/manufacturers/suppliers shall ensure accuracy and completeness of the PTS used for the intended design and engineering requirement
and shall inform the Owner for any conflicting requirement with other international codes and technical standards before start of any work.
PETRONAS is the sole copyright holder of PTS. No part of this document may be reproduced, stored in a retrieval system or transmitted in any form or
by any means (electronic, mechanical, recording or otherwise) or be disclosed by users to any company or person whomsoever, without the prior written
consent of PETRONAS.
The PTS shall be used exclusively for the authorised purpose. The users shall arrange for PTS to be kept in safe custody and shall ensure its secrecy is
maintained and provide satisfactory information to PETRONAS that this requirement is met.
Piping Material Specification Line Class : 1C101DF
Revision Number : 0
Page : 2 / 7
CORROSION ALLOWANCE : 3mm

RATING CLASS : Class 150
TYPE OF MATERIAL : Carbon Steel[A]
Pressure - Temperature Ratings
Temperature (oC) -20 0 50 75 100 125 150 200
Pressure (barG)
DN 15 to 300 19.6 19.6 19.2 18.4 17.7 16.7 15.8 13.8
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300
Schedule S-80 S-80 S-80 S-80 S-80 S-40 S-40 S-40 S-20 S-20 S-30
Item Short Code Size 1 / Size 2 Commodity Description Commodity Code

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE , ASTM A106-B, Seamless PPPABQPEACRAAGZ
P10 50 - 300 / - Pipe, ASME B36.10M, BE , ASTM A106-B, Seamless PPPABQBEACRAAGZ
Gate Valves
VG105 15 - 40 / - Gate Vlv BL Seal RB, API 602, CL 150, BE, Welded Bonnet, Handwheel , ASTM A105, VG2AA5DBECFACGBBDGKAZZ
AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts, OS&Y, ASME B16.10, ASME B16.25, Emission Class-A
VG115 50 - 300 / - Gate Vlv BL Seal FB, API 600, CL 150, BE, Bltd Bonnet, Handwheel , ASTM A216-WCB, VG9AA4DBEAFACDBBDZZZZZ
Grade 2H Nuts
Globe Valves
VL125 15 - 40 / - Globe Vlv BL Seal RB, API 602, CL 150, BE, Welded Bonnet, Handwheel , ASTM A105, VL2AA5DBECFACGBBDGKBZZ
Grade 2H Nuts, OS&Y, ASME B16.10, ASME B16.25, Emission Class-A
VL130 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, BE, Bltd Bonnet, Handwheel , ASTM A216-WCB, AISI VLRBWEDBEAFACDBBDZZZZZ
316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade
2H Nuts
VL135 200 - 300 / - Globe Vlv FB, BS 1873, CL 150, BE, Bltd Bonnet, Bevel Gear Operator , ASTM A216- VLRBWEDBEAAACDBBDZZZZZ
WCB, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM
A194 Grade 2H Nuts
Check Valves
VC140 15 - 40 / - Piston Chk Vlv RB , API 602 , CL 150, BE , Welded Bonnet , ASTM A105N , AISI 316, VC1BAA5DBECA1EP2ABGKCZZ
Stellite 6 Trim , ASME B16.10, ASME B16.25
VC145 50 - 250 / - Swing Chk Vlv , BS 1868 , CL 150, BE , Bltd Bonnet , ASTM A216-WCB , AISI 316, VCSCBWDDBEAACDBBDZZZZZ
Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VC150 300 - 300 / - Dual Plate Check , API 594 , CL 150, BE , Bonnetless , ASTM A216-WCB , AISI 316, VCWFAA2DBEAACD2ABGKDZZ
Stellite 6 Trim , Manufacturer's Standard, ASME B16.25
Flanges
F205 15 - 300 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A105 FWNABLDRFACGZZZZ
F210 15 - 300 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A105 FBLABLDRFACGZZZZ
F215 15 - 300 / - WN Flg., ASME B16.5, CL 300, RFFE , ASTM A105 FWNABLIRFACGZZZZ
BW Fittings
B305 15 - 300 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPB, Seamless BE4LABMBEACKABAZ
B315 15 - 300 / 15 - 300 Equal Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless BTEEABMBEACKABAZ
B320 20 - 300 / 15 - 250 Red. Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless BTERABMBEACKABAZ
B325 20 - 300 / 15 - 250 Con. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless BRECABMBEACKABAZ
B330 20 - 300 / 15 - 250 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless BREEABMBEACKABAZ
B335 15 - 300 / - Cap, ASME B16.9, BE , ASTM A234-WPB, Seamless BCAPABMBEACKABAZ
B345 150 - 300 / 50 - 100 Weldolet, MSS SP-97, BE , ASTM A105- BWELAM9BEACGZZZZ
B349 15 - 300 / - 30 Deg. Elbow 5D, ASME B16.9, BE , ASTM A234-WPB, Seamless BE35ABMBEACKABAZ
Forged Fittings
O505 40 - 300 / 15 - 50 Flangeolet, MSS SP-97, CL 150, RFFE , ASTM A105 O1AAAM9DRFACGZZZZ
O510 40 - 300 / 15 - 40 Nippolet, MSS SP-97, MTE , ASTM A105, CL 3000 O1ABAM9TMACG1AAU
O515 15 - 40 / - CAP, ASME B16.11, CL 3000, FTE , ASTM A105 OCAPAB2STFACGZZZZ
Gaskets
G605 15 - 300 / - Gasket camprofile, BS EN 12560 Part 6, CL 150, RF, AISI 316L, Graphite SS Centring Ring, G1AB1ACDRFAGA1AAT
WT 4 mm
G615 15 - 300 / - Gasket camprofile, BS EN 12560 Part 6, CL 300, RF, AISI 316L, Graphite SS Centring Ring, G1AB1ACIRFAGA1AAT
WT 4 mm
Bolts & Nuts
L620 15 - 40 / - Stud Bolt, BS 4882 , ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts- LS1B1AAA1ANZZZZ
Spectacle Blinds & Spacers
D705 15 - 250 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5 DF8ABMDRTAEY1AAD
D710 300 - 300 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5 DBPABMDRTAEY1AAD
Revision Number : 0
Page : 3 / 7

D715 300 - 300 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5 DBSABMDRTAEY1AAD
Revision Number : 0
Page : 4 / 7
90 Degree BRANCH CONNECTION

Legend and chart
Branch Table: RAPID_1C101DF_BR Legend:

BRANCH SIZES A Flangeolet/Nippolet Notes 65
300 T E Red. Tee
250 E T T Equal Tee
200 E E T W Weldolet
150 E E E T
100 W E E E T
80 W W W E E T
50 W W W W E E T
40 A A A A A A E T
25 A A A A A A E E T
20 A A A A A A A E E T
15 A A A A A A A A E E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
03 Ball valves are in accordance with ISO17292.
05 For basis of design see TOSP-P038-EXE-DEC-0001-PIP-DES-0001 (Piping Design Basis).
08 Piston type check valves (DN 15-40) for horizontal mounting only.
16 Valves in this piping class are in accordance with fugitive emission tightness class A (see PMRC MAR VA/124).
65 Selection of flangeolet/nippolet will be based on service and project requirements.
X04 Vents and drain connections, and pressure and temperature instrument assemblies. See TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Attachment-2 Piping
Construction Standard Drawing.
X18 5D elbow radius to be referred to TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Specification for Piping Construction Standard Attachment-3.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P5 PAATFPZPEEX 0F3K 0H3K 1A3K 1F3K
P10 PAATFPZBEEX 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
Gate Valves
VG105 VHBJDCEBEAKERBLA 0F3K 0H3K 1A3K 1F3K
VG115 VXBHBKEBEAJERBZZ 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
Globe Valves
VL125 VSBQDCEBEAKERBFH 0F3K 0H3K 1A3K 1F3K
VL130 VUBNBKEBEAJERBZZ 2A3K 3A3G 4A3G 6A3G
VL135 VUBNBKEBEAJBRBZZ 8A3E 1K3E 1M3F
Check Valves
VC140 LKBELKEBEAKCX6C 0F3K 0H3K 1A3K 1F3K
VC145 LNBBBKEBEAJRBZZ 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E
VC150 LRBDBKEBEBPEKJD 1M4J
Flanges
F205 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
F210 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
F215 FLALDCFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
BW Fittings
B305 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B310 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B315 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B335 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B349 BJAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B350 HLAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
B355 HMAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F
Forged Fittings
O515 NAACDCMTF ZZ0F ZZ0H ZZ1A ZZ1F
Gaskets
G605 GAANELERFDN 0F0C 0H0C 1A0C 1F0C 2A0C 3A0C 4A0C 6A0C 8A0C 1K0C 1M0C
G615 GAANELFRFDN 0F0C 0H0C 1A0C 1F0C 2A0C 3A0C 4A0C 6A0C 8A0C 1K0C 1M0C
D705 FCAMGVERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K
D710 FAAMGVERT AR1M
D715 FBAMGVERT AR1M
Revision Number : 0
Page : 6 / 7
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Tee Weldolet
20 x 15 NEAFKRBEAN0H3K0F3K NFAFKRBEAN0H3K0F3K NJAFKRBEAN0H3K0F3K

25 x 15 NEAFKRBEAN1A3K0F3K NFAFKRBEAN1A3K0F3K NJAFKRBEAN1A3K0F3K
25 x 20 NEAFKRBEAN1A3K0H3K NFAFKRBEAN1A3K0H3K NJAFKRBEAN1A3K0H3K
40 x 15 NEAFKRBEAN1F3K0F3K NFAFKRBEAN1F3K0F3K NMAGDCERFZZ1F0F3K NNAGDCTMCF1F3K0F3K
40 x 20 NEAFKRBEAN1F3K0H3K NFAFKRBEAN1F3K0H3K NJAFKRBEAN1F3K0H3K
40 x 25 NEAFKRBEAN1F3K1A3K NFAFKRBEAN1F3K1A3K NJAFKRBEAN1F3K1A3K
50 x 15 NMAGDCERFZZ2A0F3K NNAGDCTMCF2A3K0F3K
50 x 20 NEAFKRBEAN2A3K0H3K NFAFKRBEAN2A3K0H3K NMAGDCERFZZ2A0H3K NNAGDCTMCF2A3K0H3K
50 x 25 NEAFKRBEAN2A3K1A3K NFAFKRBEAN2A3K1A3K NJAFKRBEAN2A3K1A3K
80 x 15 NMAGDCERFZZ3A0F3K NNAGDCTMCF3A3G0F3K
80 x 20 NMAGDCERFZZ3A0H3K NNAGDCTMCF3A3G0H3K
80 x 25 NMAGDCERFZZ3A1A3K NNAGDCTMCF3A3G1A3K
80 x 40 NEAFKRBEAN3A3G1F3K NFAFKRBEAN3A3G1F3K NMAGDCERFZZ3A1F3K NNAGDCTMCF3A3G1F3K
80 x 50 NEAFKRBEAN3A3G2A3K NFAFKRBEAN3A3G2A3K NMAGDCERFZZ3A2A3K NJAFKRBEAN3A3G2A3K
100 x 40 NEAFKRBEAN4A3G1F3K NFAFKRBEAN4A3G1F3K NMAGDCERFZZ4A1F3K NNAGDCTMCF4A3G1F3K
100 x 50 NEAFKRBEAN4A3G2A3K NFAFKRBEAN4A3G2A3K NMAGDCERFZZ4A2A3K NJAFKRBEAN4A3G2A3K
100 x 80 NEAFKRBEAN4A3G3A3G NFAFKRBEAN4A3G3A3G NJAFKRBEAN4A3G3A3G
150 x 50 NMAGDCERFZZ6A2A3K NKAGDCBEZZ6A3G2A3K
200 x 15 NMAGDCERFZZ8A0F3K NNAGDCTMCF8A3E0F3K
200 x 20 NMAGDCERFZZ8A0H3K NNAGDCTMCF8A3E0H3K
200 x 25 NMAGDCERFZZ8A1A3K NNAGDCTMCF8A3E1A3K
200 x 40 NMAGDCERFZZ8A1F3K NNAGDCTMCF8A3E1F3K
200 x 50 NMAGDCERFZZ8A2A3K NKAGDCBEZZ8A3E2A3K
200 x 80 NKAGDCBEZZ8A3E3A3G
200 x 100 NEAFKRBEAN8A3E4A3G NFAFKRBEAN8A3E4A3G NJAFKRBEAN8A3E4A3G
250 x 15 NMAGDCERFZZ1K0F3K NNAGDCTMCF1K3E0F3K
250 x 20 NMAGDCERFZZ1K0H3K NNAGDCTMCF1K3E0H3K
250 x 25 NMAGDCERFZZ1K1A3K NNAGDCTMCF1K3E1A3K
250 x 40 NMAGDCERFZZ1K1F3K NNAGDCTMCF1K3E1F3K
250 x 50 NMAGDCERFZZ1K2A3K NKAGDCBEZZ1K3E2A3K
250 x 80 NKAGDCBEZZ1K3E3A3G
250 x 100 NEAFKRBEAN1K3E4A3G NFAFKRBEAN1K3E4A3G NJAFKRBEAN1K3E4A3G
250 x 200 NEAFKRBEAN1K3E8A3E NFAFKRBEAN1K3E8A3E NJAFKRBEAN1K3E8A3E
300 x 15 NMAGDCERFZZ1M0F3K NNAGDCTMCF1M3F0F3K
300 x 20 NMAGDCERFZZ1M0H3K NNAGDCTMCF1M3F0H3K
300 x 25 NMAGDCERFZZ1M1A3K NNAGDCTMCF1M3F1A3K
300 x 40 NMAGDCERFZZ1M1F3K NNAGDCTMCF1M3F1F3K
300 x 50 NMAGDCERFZZ1M2A3K NKAGDCBEZZ1M3F2A3K
300 x 80 NKAGDCBEZZ1M3F3A3G
300 x 150 NEAFKRBEAN1M3F6A3G NFAFKRBEAN1M3F6A3G NJAFKRBEAN1M3F6A3G
300 x 200 NEAFKRBEAN1M3F8A3E NFAFKRBEAN1M3F8A3E NJAFKRBEAN1M3F8A3E
300 x 250 NEAFKRBEAN1M3F1K3E NFAFKRBEAN1M3F1K3E NJAFKRBEAN1M3F1K3E
Revision Number : 0
Page : 7 / 7
BLT FOR BLIND/SPACER BLT FOR STANDARD FLA BLT FOR STANDARD FLA
DN nr inch x mm PMRC DN nr inch x mm PMRC DN nr inch x mm PMRC
15 4 1/2 x 70 BAAAAAZZ0F0Q 15 4 1/2 x 60 BAAAAAZZ0F0N 15 4 1/2 x 70 BAAAAAZZ0F0Q

20 4 1/2 x 70 BAAAAAZZ0F0Q 20 4 1/2 x 70 BAAAAAZZ0F0Q 20 4 5/8 x 80 BAAAAAZZ0G0S
25 4 1/2 x 80 BAAAAAZZ0F0S 25 4 1/2 x 70 BAAAAAZZ0F0Q 25 4 5/8 x 80 BAAAAAZZ0G0S
40 4 1/2 x 80 BAAAAAZZ0F0S 40 4 1/2 x 80 BAAAAAZZ0F0S 40 4 3/4 x 100 BAAAAAZZ0H1A
50 4 5/8 x 100 BAAAAAZZ0G1A 50 4 5/8 x 90 BAAAAAZZ0G0U 50 8 5/8 x 90 BAAAAAZZ0G0U
80 4 5/8 x 110 BAAAAAZZ0G1C 65 4 5/8 x 90 BAAAAAZZ0G0U 80 8 3/4 x 110 BAAAAAZZ0H1C
100 8 5/8 x 110 BAAAAAZZ0G1C 80 4 5/8 x 100 BAAAAAZZ0G1A 100 8 3/4 x 120 BAAAAAZZ0H1E
150 8 3/4 x 120 BAAAAAZZ0H1E 100 8 5/8 x 100 BAAAAAZZ0G1A 125 8 3/4 x 120 BAAAAAZZ0H1E
200 8 3/4 x 130 BAAAAAZZ0H1G 125 8 3/4 x 100 BAAAAAZZ0H1A 150 12 3/4 x 130 BAAAAAZZ0H1G
250 12 7/8 x 140 BAAAAAZZ0J1J 150 8 3/4 x 110 BAAAAAZZ0H1C 200 12 7/8 x 140 BAAAAAZZ0J1J
300 12 7/8 x 150 BAAAAAZZ0J1L 200 8 3/4 x 110 BAAAAAZZ0H1C 250 16 1 x 160 BAAAAAZZ1A1N
350 12 1 x 160 BAAAAAZZ1A1N 250 12 7/8 x 120 BAAAAAZZ0J1E 300 16 1-1/8 x 180 BAAAAAZZ1B1S
400 16 1 x 170 BAAAAAZZ1A1Q 300 12 7/8 x 120 BAAAAAZZ0J1E 350 20 1-1/8 x 180 BAAAAAZZ1B1S
450 16 1-1/8 x 180 BAAAAAZZ1B1S 350 12 1 x 140 BAAAAAZZ1A1J 400 20 1-1/4 x 190 BAAAAAZZ1D1U
500 20 1-1/8 x 200 BAAAAAZZ1B2A 400 16 1 x 140 BAAAAAZZ1A1J 450 24 1-1/4 x 200 BAAAAAZZ1D2A
600 20 1-1/4 x 220 BAAAAAZZ1D2E 450 16 1-1/8 x 150 BAAAAAZZ1B1L 500 24 1-1/4 x 210 BAAAAAZZ1D2C
500 20 1-1/8 x 160 BAAAAAZZ1B1N 600 24 1-1/2 x 240 BAAAAAZZ1F2J
600 20 1-1/4 x 180 BAAAAAZZ1D1S
P_NOSBL
1C108DF
Carbon Steel, Class 150
Revision: 0
Issue Date : Mar 17, 2022
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 7
CORROSION ALLOWANCE : 1.0 mm

TYPE OF MATERIAL : Carbon steel
Temperature (oC) -20 0 50 100 150 200 250 300 350 400
Pressure (barG)
DN 15 to 450 19.6 19.6 19.2 17.7 15.8 13.8 12.1 10.2 8.4 6.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
Schedule S-80 S-80 S-80 S-80 S-40 S-40 S-40 S-40 S-20 S-20 S-20 S-20
400 450
S-20 S-20

Pipes & Tubes
Check Valves
VC111 300 - 300 / - Dual Plate Check, API 594, CL 150, RF, ASTM A216-WCB, AISI 410, Stellite 6 Trim VCWFAA2DRFZACDBCEZZZZ
VC119 15 - 40 / - Piston Chk Vlv RB, API 602, CL 150, RF, Bltd Bonnet, ASTM A105 Normalised, AISI 316, VC1BAA5DRFAA1BUBBDZZZZ
Nuts
VC121 50 - 250 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A216-WCB , AISI 410, VCSCBWDDRFAACD2BEZZZZ
Nuts
Gate Valves
VG124 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A105 Normalised, VG3AA5DRFAFA1BUBBDZZZZ
Grade 2H Nuts
VG126 50 - 300 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, AISI 410, VGRAA4DRFAFACD2AEZZZZ
Nuts
Globe Valves
VL190 15 - 40 / - Globe Valve RB, API 602, CL 150, RF, Bltd Bonnet, Handwheel , ASTM A105 Normalised, VL3AA5DRFAFA1BUBBDZZZZ
Grade 2H Nuts
VL200 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, AISI VLRBWEDRFAFACD2AEZZZZ
2H Nuts
VL201 200 - 200 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A216- VLRBWEDRFAAACD2AEZZZZ
A194 Grade 2H Nuts
Ball Valves
VB210 50 - 150 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBTEAADRF8CACD1GRZZZZ
Lever , ASTM A216-WCB, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM
A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
Flanges
BW Fittings
B450 15 - 300 / - Equal Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless BTEEABMBEACKABAZ
Forged Fittings
O506 40 - 300 / 15 - 40 Nippolet, MSS SP-97, PE , ASTM A105, CL 3000 O1ABAM9PEACG1AAU
O510 20 - 20 / - Nipple, ASME B36.10M, BE x MTE , ASTM A106-B, 75mm ONIPABQMBACRBAAM
Gaskets
G610 15 - 450 / - Spiral Wound Gskt, ASME B16.20, CL 150, RF , AISI 316, ASME B16.5, Graphite CS GSWABADRFA1AX1AAL
Centring-/SS Inner Ring, WT 4.5 mm
G611 15 - 300 / - Spiral Wound Gskt, ASME B16.20, CL 300, RF , AISI 316, ASME B16.5, Graphite CS GSWABAIRFA1AX1AAL
Bolts & Nuts
Revision Number : 0
Page : 3 / 7

Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1C108DF_BR_1 Legend:

450 T B Reinforcing Weld
400 E T E Red. Tee
350 E P T P Pipe To Pipe
300 E P P T T Equal Tee
250 E P P P T
W Weldolet
200 W P P P P T
150 P P P P P P T
100 P P P P P P P T
80 P P P P P P P P T
50 W P P P P P P P P T
40 A A A A A A A A A E T
25 A A A A A A A A A E E T
20 A A A A A A A A A A E E T
15 A A A A A A A A A A A E E T
450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
64 Refer to ASME B31.3 to determine reinforcement requirement based on design condition.
66 Please refer to MAR documents for MAR details.
160 300# gaskets shall be used only to match higher rating flanges.
161 Lap Joint flanges shall be used only for meter run, orifice, and pressure and temperature instrument assemblies as indicated in the assembly details.
162 Flangeolets shall be used only for vents and drain connections, and pressure and temperature instrument assemblies. See TOSP-P038-EXE-DEC-0001-PIP-
SPN-0012 Attachment -2 Piping Construction Standard Drawing.
X14 Ball valves shall only be used for custody metering skid.
X25 The selection of a Ball Valve will de-rate this Pipe Class in accordance with ISO 17292.
X38 Nipple to be used only for hose connection in utility stations.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450
Pipes & Tubes

P10 PAATFPZBEEX 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E
Check Valves
VC111 LRBDBKERFZRC ZZ1M
VC119 LKBECBERFAJRB ZZ0F ZZ0H ZZ1A ZZ1F
VC121 LNBBBKERFAJHR ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K
Gate Valves
VG124 VJBJCBERFAJEKM ZZ0F ZZ0H ZZ1A ZZ1F
VG126 VQBHBKERFAJEHR ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
Globe Valves
VL190 VTBQATERFAJERB ZZ0F ZZ0H ZZ1A ZZ1F
VL200 VUBNBKERFAJEKM ZZ2A ZZ3A ZZ4A ZZ6A
VL201 VUBNBKERFAJBKM ZZ8A
Ball Valves
VB210 VWAVBKERFAZCUA ZZ2A ZZ3A ZZ4A ZZ6A
Flanges
F330 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E
F335 FLALDCFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B415 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B425 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B450 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Forged Fittings
O510 NUATFPMBEV 0H3K
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D
G611 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D
D705 FAAMGVERT AR1M
D725 FBAMGVERT AR1M
Revision Number : 0
Page : 6 / 7
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Tee

40 x 15 NEAFKRBEAN1F3K0F3K NFAFKRBEAN1F3K0F3K NMAGDCERFZZ1F0F3K NNAGDCPECF1F3K0F3K
50 x 15 NMAGDCERFZZ2A0F3K NNAGDCPECF2A3G0F3K
50 x 20 NEAFKRBEAN2A3G0H3K NFAFKRBEAN2A3G0H3K NMAGDCERFZZ2A0H3K NNAGDCPECF2A3G0H3K
50 x 25 NEAFKRBEAN2A3G1A3K NFAFKRBEAN2A3G1A3K NJAFKRBEAN2A3G1A3K
50 x 40 NEAFKRBEAN2A3G1F3K NFAFKRBEAN2A3G1F3K NJAFKRBEAN2A3G1F3K
80 x 20 NMAGDCERFZZ3A0H3K NNAGDCPECF3A3G0H3K
80 x 25 NMAGDCERFZZ3A1A3K NNAGDCPECF3A3G1A3K
80 x 40 NEAFKRBEAN3A3G1F3K NFAFKRBEAN3A3G1F3K NMAGDCERFZZ3A1F3K NNAGDCPECF3A3G1F3K
80 x 50 NEAFKRBEAN3A3G2A3G NFAFKRBEAN3A3G2A3G
200 x 15 NMAGDCERFZZ8A0F3K NNAGDCPECF8A3E0F3K
200 x 20 NMAGDCERFZZ8A0H3K NNAGDCPECF8A3E0H3K
200 x 25 NMAGDCERFZZ8A1A3K NNAGDCPECF8A3E1A3K
200 x 100 NEAFKRBEAN8A3E4A3G NFAFKRBEAN8A3E4A3G
250 x 15 NMAGDCERFZZ1K0F3K NNAGDCPECF1K3E0F3K
250 x 20 NMAGDCERFZZ1K0H3K NNAGDCPECF1K3E0H3K
250 x 25 NMAGDCERFZZ1K1A3K NNAGDCPECF1K3E1A3K
250 x 100 NEAFKRBEAN1K3E4A3G NFAFKRBEAN1K3E4A3G
250 x 200 NEAFKRBEAN1K3E8A3E NFAFKRBEAN1K3E8A3E
300 x 15 NMAGDCERFZZ1M0F3K NNAGDCPECF1M3E0F3K
300 x 20 NMAGDCERFZZ1M0H3K NNAGDCPECF1M3E0H3K
300 x 25 NMAGDCERFZZ1M1A3K NNAGDCPECF1M3E1A3K
300 x 150 NEAFKRBEAN1M3E6A3G NFAFKRBEAN1M3E6A3G
300 x 200 NEAFKRBEAN1M3E8A3E NFAFKRBEAN1M3E8A3E
300 x 250 NEAFKRBEAN1M3E1K3E NFAFKRBEAN1M3E1K3E
350 x 150 NFAFKRBEAN1P3E6A3G
350 x 200 NFAFKRBEAN1P3E8A3E
350 x 250 NFAFKRBEAN1P3E1K3E
350 x 300 NFAFKRBEAN1P3E1M3E
400 x 200 NFAFKRBEAN1R3E8A3E
400 x 250 NFAFKRBEAN1R3E1K3E
400 x 300 NFAFKRBEAN1R3E1M3E
400 x 350 NFAFKRBEAN1R3E1P3E
450 x 250 NFAFKRBEAN1T3E1K3E
450 x 300 NFAFKRBEAN1T3E1M3E
450 x 350 NFAFKRBEAN1T3E1P3E
450 x 400 NFAFKRBEAN1T3E1R3E
Revision Number : 0
Page : 7 / 7
BLT FOR BLIND/SPACER BLT FOR STD FLG

DN nr inch x mm PMRC DN nr inch x mm PMRC
15 4 1/2 x 70 BAAAAAZZ0F0Q 20 4 1/2 x 70 BAAAAAZZ0F0Q

20 4 1/2 x 80 BAAAAAZZ0F0S 25 4 1/2 x 70 BAAAAAZZ0F0Q
25 4 1/2 x 80 BAAAAAZZ0F0S 40 4 1/2 x 80 BAAAAAZZ0F0S
40 4 1/2 x 80 BAAAAAZZ0F0S 50 4 5/8 x 90 BAAAAAZZ0G0U
50 4 5/8 x 100 BAAAAAZZ0G1A 80 4 5/8 x 100 BAAAAAZZ0G1A
80 4 5/8 x 110 BAAAAAZZ0G1C 100 8 5/8 x 100 BAAAAAZZ0G1A
100 8 5/8 x 110 BAAAAAZZ0G1C 150 8 3/4 x 110 BAAAAAZZ0H1C
150 8 3/4 x 120 BAAAAAZZ0H1E 200 8 3/4 x 110 BAAAAAZZ0H1C
200 8 3/4 x 130 BAAAAAZZ0H1G 250 12 7/8 x 120 BAAAAAZZ0J1E
250 12 7/8 x 140 BAAAAAZZ0J1J 300 12 7/8 x 120 BAAAAAZZ0J1E
300 12 7/8 x 150 BAAAAAZZ0J1L 350 12 1 x 140 BAAAAAZZ1A1J
400 16 1 x 170 BAAAAAZZ1A1Q 400 16 1 x 140 BAAAAAZZ1A1J
450 16 1-1/8 x 180 BAAAAAZZ1B1S 450 16 1-1/8 x 150 BAAAAAZZ1B1L
500 20 1-1/8 x 200 BAAAAAZZ1B2A 500 20 1-1/8 x 160 BAAAAAZZ1B1N
600 20 1-1/4 x 220 BAAAAAZZ1D2E 600 20 1-1/4 x 180 BAAAAAZZ1D1S
900 32 1-1/2 x 340 BAAAAAZZ1F3J 750 28 1-1/4 x 240 BAAAAAZZ1D2J
900 32 1-1/2 x 290 BAAAAAZZ1F2U
P_NOSBL
1C108DG
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C108DG
Revision Number : 0
Page : 2 / 7

Temperature (oC) -20 0 50 100 150 200 250 300 350 400
Pressure (barG)
DN 15 to 300 19.6 19.6 19.2 17.7 15.8 13.8 12.1 10.2 8.4 6.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300

Pipes & Tubes
Check Valves
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Globe Valves
Grade 2H Nuts
2H Nuts
A194 Grade 2H Nuts
Ball Valves
Flanges
BW Fittings
Forged Fittings
O510 20 - 20 / - Nipple, ASME B36.10M, BE x MTE , ASTM A106-B, 75mm ONIPABQMBACRBAAM
Gaskets
Bolts & Nuts
Revision Number : 0
Page : 3 / 7

Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1C108DG_BR Legend:

250 E T E Red. Tee
200 E E T P Pipe To Pipe
150 E E E T T Equal Tee
100 W E E P T
W Weldolet
80 W W W P P T
50 W W W P P P T
40 A A A A A A E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
64 Refer to ASME B31.3 to determine reinforcement requirement based on design condition.
X38 Nipple to be used only for hose connection in utility stations.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P10 PAATFPZBEEX 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Check Valves
Gate Valves
Globe Valves
Ball Valves
Flanges
F330 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
F335 FLALDCFRFZZ 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B415 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B425 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B450 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Forged Fittings
O510 NUATFPMBEV 0H3K
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D
G611 GEASDUFRFDJ 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D
D705 FAAMGVERT AR1M
D725 FBAMGVERT AR1M
Revision Number : 0
Page : 6 / 7
Reducing Component

300 x 50 NKAGDCBEZZ1M3E2A3G
300 x 150 NEAFKRBEAN1M3E6A3G NFAFKRBEAN1M3E6A3G NJAFKRBEAN1M3E6A3G
300 x 200 NEAFKRBEAN1M3E8A3E NFAFKRBEAN1M3E8A3E NJAFKRBEAN1M3E8A3E
300 x 250 NEAFKRBEAN1M3E1K3E NFAFKRBEAN1M3E1K3E NJAFKRBEAN1M3E1K3E
Revision Number : 0
Page : 7 / 7


200 8 3/4 x 130 BAAAAAZZ0H1G 350 12 1 x 140 BAAAAAZZ1A1J
400 16 1 x 170 BAAAAAZZ1A1Q 500 20 1-1/8 x 160 BAAAAAZZ1B1N
450 16 1-1/8 x 180 BAAAAAZZ1B1S 600 20 1-1/4 x 180 BAAAAAZZ1D1S
500 20 1-1/8 x 200 BAAAAAZZ1B2A
600 20 1-1/4 x 220 BAAAAAZZ1D2E
P_NOSBL
1C114DF
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 7
ADDITIONAL SERVICES : ,
Temperature (oC) -20 0 50 100 150 200 250 300 350 400
Pressure (barG)
DN 15 to 300 19.6 19.6 19.2 17.7 15.8 13.8 12.1 10.2 8.4 6.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300

Pipes & Tubes
Check Valves
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Globe Valves
Grade 2H Nuts
2H Nuts
A194 Grade 2H Nuts
Ball Valves
VB150 50 - 150 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBTEAADRF8CACD1GRGKGZZ
A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Fire Safe Per API 607
Flanges
BW Fittings
B405 100 - 250 / - 30 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPB, Seamless B1ADABMBEACKABAZ
Forged Fittings
O506 40 - 300 / 15 - 40 Nippolet, MSS SP-97, PE , ASTM A105, CL 6000 O1ABAM9PEACG1AAV
Gaskets
Bolts & Nuts
D715 300 - 300 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.5 DBPABMDRTAF11AAD
Revision Number : 0
Page : 3 / 7

D735 300 - 300 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.5 DBSABMDRTAF11AAD
D765 15 - 250 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.5 DF8ABMDRTAF11AAD
Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1C114DF_BR Legend:

250 E T E Red. Tee
200 E P T P Pipe To Pipe
150 E P P T T Equal Tee
100 W P P P T
W Weldolet
80 P P P P P T
50 W P P P P P T
40 A A A A A A E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
166 Piping design meets full vacuum at 160 deg C.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P5 PAATFPZPEEX 0F3Q 0H3Q 1A3Q 1F3Q
P10 PAATFPZBEEX 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
Check Valves
Gate Valves
Globe Valves
Ball Valves
VB150 VWAVBKERFAZCUA SB2A SB3A SB4A SB6A
Flanges
F325 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
F330 FLALDCFRFZZ 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
BW Fittings
B405 MNAFKRBEAN 4A3G 6A3G 8A3F 1K3F
B410 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
B415 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
B425 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
B450 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F
Gaskets
G612 GEASDUFRFDJ 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D
D715 FAAMGXERT AR1M
D735 FBAMGXERT AR1M
D765 FCAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K
Revision Number : 0
Page : 6 / 7
Reducing Component
20 x 15 NEAFKRBEAN0H3Q0F3Q NFAFKRBEAN0H3Q0F3Q NJAFKRBEAN0H3Q0F3Q

25 x 15 NEAFKRBEAN1A3Q0F3Q NFAFKRBEAN1A3Q0F3Q NJAFKRBEAN1A3Q0F3Q
25 x 20 NEAFKRBEAN1A3Q0H3Q NFAFKRBEAN1A3Q0H3Q NJAFKRBEAN1A3Q0H3Q
40 x 15 NEAFKRBEAN1F3Q0F3Q NFAFKRBEAN1F3Q0F3Q NMAGDCERFZZ1F0F3Q NNAGDCPECG1F3Q0F3Q
40 x 20 NEAFKRBEAN1F3Q0H3Q NFAFKRBEAN1F3Q0H3Q NJAFKRBEAN1F3Q0H3Q
40 x 25 NEAFKRBEAN1F3Q1A3Q NFAFKRBEAN1F3Q1A3Q NJAFKRBEAN1F3Q1A3Q
50 x 15 NMAGDCERFZZ2A0F3Q NNAGDCPECG2A3K0F3Q
50 x 20 NEAFKRBEAN2A3K0H3Q NFAFKRBEAN2A3K0H3Q NMAGDCERFZZ2A0H3Q NNAGDCPECG2A3K0H3Q
50 x 25 NEAFKRBEAN2A3K1A3Q NFAFKRBEAN2A3K1A3Q NJAFKRBEAN2A3K1A3Q
50 x 40 NEAFKRBEAN2A3K1F3Q NFAFKRBEAN2A3K1F3Q NJAFKRBEAN2A3K1F3Q
80 x 15 NMAGDCERFZZ3A0F3Q NNAGDCPECG3A3K0F3Q
80 x 20 NMAGDCERFZZ3A0H3Q NNAGDCPECG3A3K0H3Q
80 x 25 NMAGDCERFZZ3A1A3Q NNAGDCPECG3A3K1A3Q
80 x 40 NEAFKRBEAN3A3K1F3Q NFAFKRBEAN3A3K1F3Q NMAGDCERFZZ3A1F3Q NNAGDCPECG3A3K1F3Q
80 x 50 NEAFKRBEAN3A3K2A3K NFAFKRBEAN3A3K2A3K
100 x 15 NMAGDCERFZZ4A0F3Q NNAGDCPECG4A3G0F3Q
100 x 20 NMAGDCERFZZ4A0H3Q NNAGDCPECG4A3G0H3Q
100 x 25 NMAGDCERFZZ4A1A3Q NNAGDCPECG4A3G1A3Q
100 x 40 NEAFKRBEAN4A3G1F3Q NFAFKRBEAN4A3G1F3Q NMAGDCERFZZ4A1F3Q NNAGDCPECG4A3G1F3Q
100 x 50 NEAFKRBEAN4A3G2A3K NFAFKRBEAN4A3G2A3K
150 x 20 NMAGDCERFZZ6A0H3Q NNAGDCPECG6A3G0H3Q
150 x 25 NMAGDCERFZZ6A1A3Q NNAGDCPECG6A3G1A3Q
200 x 15 NMAGDCERFZZ8A0F3Q NNAGDCPECG8A3F0F3Q
200 x 20 NMAGDCERFZZ8A0H3Q NNAGDCPECG8A3F0H3Q
200 x 25 NMAGDCERFZZ8A1A3Q NNAGDCPECG8A3F1A3Q
200 x 40 NMAGDCERFZZ8A1F3Q NNAGDCPECG8A3F1F3Q
200 x 100 NEAFKRBEAN8A3F4A3G NFAFKRBEAN8A3F4A3G
250 x 15 NMAGDCERFZZ1K0F3Q NNAGDCPECG1K3F0F3Q
250 x 20 NMAGDCERFZZ1K0H3Q NNAGDCPECG1K3F0H3Q
250 x 25 NMAGDCERFZZ1K1A3Q NNAGDCPECG1K3F1A3Q
250 x 40 NMAGDCERFZZ1K1F3Q NNAGDCPECG1K3F1F3Q
250 x 100 NEAFKRBEAN1K3F4A3G NFAFKRBEAN1K3F4A3G
250 x 200 NEAFKRBEAN1K3F8A3F NFAFKRBEAN1K3F8A3F
300 x 15 NMAGDCERFZZ1M0F3Q NNAGDCPECG1M3F0F3Q
300 x 20 NMAGDCERFZZ1M0H3Q NNAGDCPECG1M3F0H3Q
300 x 25 NMAGDCERFZZ1M1A3Q NNAGDCPECG1M3F1A3Q
300 x 40 NMAGDCERFZZ1M1F3Q NNAGDCPECG1M3F1F3Q
300 x 50 NKAGDCBEZZ1M3F2A3K
300 x 200 NEAFKRBEAN1M3F8A3F NFAFKRBEAN1M3F8A3F NJAFKRBEAN1M3F8A3F
300 x 250 NEAFKRBEAN1M3F1K3F NFAFKRBEAN1M3F1K3F NJAFKRBEAN1M3F1K3F
Revision Number : 0
Page : 7 / 7


200 8 3/4 x 130 BAAAAAZZ0H1G 250 12 7/8 x 120 BAAAAAZZ0J1E
250 12 7/8 x 140 BAAAAAZZ0J1J 300 12 7/8 x 120 BAAAAAZZ0J1E
450 16 1-1/8 x 180 BAAAAAZZ1B1S 500 20 1-1/8 x 160 BAAAAAZZ1B1N
500 20 1-1/8 x 200 BAAAAAZZ1B2A 600 20 1-1/4 x 180 BAAAAAZZ1D1S
600 20 1-1/4 x 220 BAAAAAZZ1D2E 750 28 1-1/4 x 240 BAAAAAZZ1D2J
900 32 1-1/2 x 340 BAAAAAZZ1F3J 900 32 1-1/2 x 290 BAAAAAZZ1F2U
1050 36 1-1/2 x 360 BAAAAAZZ1F3N
1200 44 1-1/2 x 390 BAAAAAZZ1F3U
P_NOSBL
1C119DF-20
Carbon Steel LT H-Sour PWHT, Class 150
Revision: 0
Issue Date : Feb 08, 2022
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C119DF-20
Revision Number : 0
Page : 2 / 11

TYPE OF MATERIAL : Carbon Steel LT H-Sour
Temperature (oC) -46 -45 -29 0 50 100 150 200 250 300 315 350 400
Pressure (barG)
DN 15 to 600 19.6 19.6 19.2 17.7 15.8 13.8 12.1 10.2 8.4 6.5
DN 750 to 1800 7 7 3.5 7 7 3.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500 600 750 800 900 1050 1200 1400 1600 1800
S-20 S-20 S-20 S-20 S-STD S-XS S-XS S-XS S-XS 14.27 mm 15.88 mm 17.48 mm

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE , ASTM A333-6, Seamless, Sour PPPABQPEAD41ABY
P10 50 - 600 / - Pipe, ASME B36.10M, BE , ASTM A333-6, Seamless, Sour PPPABQBEAD41ABY
P15 750 - 1800 / - Pipe, ASME B36.10M, BE , ASTM A671-CC65 CL22, Submerged Arc Welding (SAW), PPPABQBEA1ACGKEZ
Sour
Butterfly Valves
VY105 750 - 900 / - Bfly Vlv Off Triple, API 609 Cat B, CL 150, RF, Bevel Gear Operator , ASTM A352 Grade VYSAA2DRFAA1BC2BDGKHZZ
LCC, LTCS, Duplex, Stellite Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
ASTM A194 Grade 7M Nuts, Sour, Offset, Triple, Bolted Extension Bonnet
VY106 750 - 1600 / - Bfly Vlv Off Triple, API 609 Cat B, CL 150, RF, Bolted Cover Bonnet, Bevel Gear Operator, VYSAA2DRF2AA1BC2BD1ACX
ASTM A352 Grade LCC, LTCS, Duplex, Stellite Trim, Graphite Seals, ASTM A320 Grade
L7M Bolts/Studs, ASTM A194 Grade 7M Nuts, Sour, Offset, Triple
Check Valves
VC110 300 - 600 / - Dual Plate Check, API 594, CL 150, RF, ASTM A352 Grade LCC, AISI 316, Stellite 6 Trim, VCWFAA2DRFZA1BC2CPAAMZ
Sour, ASME B16.5
VC114 750 - 900 / - Dual Plate Check, API 594, CL 150, RF, ASTM A352 Grade LCC, AISI 316, Stellite 6 Trim, VCWFAA2DRFZA1BC2CPZZZZ
Sour
VC125 15 - 40 / - Piston Chk Vlv RB, API 602, CL 150, RF, Bltd Bonnet, ASTM A350 Grade LF2 Class 1, VC1BAA5DRFAACR2BUZZZZ
AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs, ASTM
A194 Grade 7M Nuts, Sour
VC127 50 - 250 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A352 Grade LCC , AISI 316, VCSCBWDDRFAA1BC2BUZZZZ
Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs, ASTM A194 Grade
7M Nuts, Sour
Gate Valves
VG137 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bolted Extension Bonnet, Handwheel, ASTM A350 VG3AA5DRF4FACR2BU1ABK
Grade LF2 Class 1, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M
Bolts/Studs, ASTM A194 Grade 7M Nuts, Sour, API STD 602
VG138 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bltd Bonnet, n-ext, Handwheel, ASTM A350 Grade VG3AA5DRF8FACR2BU1ABK
LF2 Class 1, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
ASTM A194 Grade 7M Nuts, Sour, API STD 602
VG139 50 - 300 / - Gate Vlv FB, API 600, CL 150, RF, Bolted Extension Bonnet, Handwheel, ASTM A352 VGRAA4DRF4FA1BC2BUZZZZ
Grade LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
ASTM A194 Grade 7M Nuts, Sour
VG140 50 - 300 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A352 Grade LCC, VGRAA4DRFAFA1BC2BUZZZZ
VG142 350 - 600 / - Gate Vlv FB, API 600, CL 150, RF, Bolted Extension Bonnet, Bevel Gear Operator, ASTM VGRAA4DRF4AA1BC2BUZZZZ
A352 Grade LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M
Bolts/Studs, ASTM A194 Grade 7M Nuts, Sour
VG143 350 - 600 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A352 Grade VGRAA4DRFAAA1BC2BUZZZZ
LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
Globe Valves
VL148 15 - 40 / - Globe Valve RB, API 602, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A350 Grade LF2 VL3AA5DRFAFACR2BU1ABK
Class 1, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
VL149 15 - 40 / - Globe Valve RB, API 602, CL 150, RF, Bltd Bonnet, n-ext, Handwheel, ASTM A350 Grade VL3AA5DRF8FACR2BU1ABK
LF2 Class 1, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
VL150 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A352 Grade LCC, VLRBWEDRFAFA1BC2BUZZZZ
VL151 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, RF, Bolted Extension Bonnet, Handwheel, ASTM A352 VLRBWEDRF4FA1BC2BUZZZZ
Grade LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
VL152 200 - 200 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A352 Grade VLRBWEDRFAAA1BC2BUZZZZ
LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M Bolts/Studs,
VL153 200 - 200 / - Globe Vlv FB, BS 1873, CL 150, RF, Bolted Extension Bonnet, Bevel Gear Operator, ASTM VLRBWEDRF4AA1BC2BUZZZZ
A352 Grade LCC, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7M
Bolts/Studs, ASTM A194 Grade 7M Nuts, Sour
Revision Number : 0
Page : 3 / 11

Flanges
F305 15 - 600 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 FBLABLDRFACRZZZZ
F310 750 - 900 / - Blind Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 FBLABHDRFACRZZZZ
F315 1600 - 1600 / - Blind Flg., ASME Sec.VIII Div.1 Appendix.2-S, CL 150, RFFE , ASTM A350 Grade LF2 FBLABNDRFACRZZZZ
Class 1
F325 15 - 600 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 FWNABLDRFACRZZZZ
F330 750 - 1050 / - WN Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 FWNABHDRFACRZZZZ
F331 1600 - 1800 / - WN Flg., ASME Sec.VIII Div.1, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 FWNABODRFACRZZZZ
F335 20 - 600 / - WN Flg., ASME B16.5, CL 300, RFFE , ASTM A350 Grade LF2 Class 1 FWNABLIRFACRZZZZ
BW Fittings
B405 15 - 600 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low BE4LABMBEAYU1ACD
Temp
B410 750 - 1200 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BE4LABMBEA1AL1ADD
B415 15 - 600 / - 90 Deg. LR Elbow, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low BE9LABMBEAYU1ACD
Temp
B420 750 - 1200 / - 90 Deg. LR Elbow, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BE9LABMBEA1AL1ADD
B421 1400 - 1400 / - 90 Deg. LR Elbow, MSS SP-75, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BE9LAM5BEA1AL1ADD
B422 1600 - 1600 / - 90 Deg. LR Elbow, Manufacturer's Standard, BE , ASTM A420-WPL6W, Welded, Sour and BE9LA1CBEA1AL1ADD
Low Temp
B425 15 - 900 / - Cap, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low Temp BCAPABMBEAYU1ACD
B430 20 - 600 / 15 - 500 Con. Reducer, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low BRECABMBEAYU1ACD
Temp
B435 750 - 900 / 600 - 750 Con. Reducer, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BRECABMBEA1AL1ADD
B440 20 - 600 / 15 - 500 Ecc. Reducer, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low BREEABMBEAYU1ACD
Temp
B445 750 - 900 / 600 - 750 Ecc. Reducer, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BREEABMBEA1AL1ADD
B446 1400 - 1400 / 600 - 1050 Ecc. Reducer, MSS SP-75, BE , ASTM A420-WPL6W, Welded, Sour BREEAM5BEA1AL1ABU
B447 1600 - 1800 / 750 - 1600 Ecc. Reducer, Manufacturer's Standard, BE , ASTM A420-WPL6W, Welded, Sour and Low BREEA1CBEA1AL1ADD
Temp
B450 15 - 600 / - Equal Tee, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low Temp BTEEABMBEAYU1ACD
B455 750 - 900 / - Equal Tee, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BTEEABMBEA1AL1ADD
B456 1400 - 1400 / - Equal Tee, MSS SP-75, BE , ASTM A420-WPL6W, Welded, Sour BTEEAM5BEA1AL1ABU
B457 1600 - 1600 / - Equal Tee, Manufacturer's Standard, BE , ASTM A420-WPL6W, Welded, Sour BTEEA1CBEA1AL1ABU
B460 20 - 600 / 15 - 500 Red. Tee, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Sour and Low Temp BTERABMBEAYU1ACD
B465 750 - 900 / 400 - 750 Red. Tee, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour and Low Temp BTERABMBEA1AL1ADD
B470 300 - 1400 / 50 - 400 Weldolet, MSS SP-97, BE , ASTM A350 Grade LF2 Class 1, Low Temp BWELAM9BEACR1ADM
B475 900 - 900 / - 45 Deg Eq Lat Tee, ASME B16.9, BE , ASTM A420-WPL6W, Welded, Sour BLEEABMBEA1AL1ABU
Forged Fittings
O505 40 - 1600 / 15 - 40 Flangeolet, MSS SP-97, CL 150, RFFE , ASTM A350 Grade LF2 Class 1 O1AAAM9DRFACRZZZZ
Gaskets
G605 750 - 1050 / - Gasket camprofile, BS EN 12560 Part 6, CL 150, RF, AISI 316, ASME B16.47 Series A, G1AB1ACDRFA1AX1AAH
Graphite SS Centring Ring, WT 4 mm
G615 1600 - 1800 / - Gasket camprofile, BS EN 12560 Part 6, CL 150, RF, AISI 316, Graphite SS Centring Ring, G1AB1ACDRFA1AX1AAT
WT 4 mm
Bolts & Nuts
L655 15 - 40 / - Stud Bolt, BS 4882 , ASTM A320-L7M Bolts/Studs/ASTM A194-7M Nuts- LS1B1AAA1ARZZZZ
D720 15 - 600 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5, Sour DBPABMDRTAEY1ABU
D735 750 - 1050 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.47 Sr.A, Sour DBPABMDRTAF11ADJ
D740 15 - 600 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5, Sour DBSABMDRTAEY1ABU
D755 750 - 1050 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.47 Sr.A, Sour DBSABMDRTAEY1ADJ
D770 15 - 250 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.5, Sour DF8ABMDRTAEY1ABU
Revision Number : 0
Page : 4 / 11

Legend and chart
Branch Table: CLASS1C119DA20_BR Legend:

1600 E T E Red. Tee
1050 E E E E T
W Weldolet
900 E E E E E T
750 E E E E E E T
600 E E E E E E E T
500 W W W W W E E E T
450 W W W W W E E E E T
400 W W W W W W E E E E T
350 W W W W W W W E E E E T
300 W W W W W W W E E E E E T
250 W W W W W W W W W E E E E T
200 W W W W W W W W W W W E E P T
150 W W W W W W W W W W W W E P P T
100 W W W W W W W W W W W W W P P P T
80 W W W W W W W W W W W W P P P P P T
50 W W W W W W W W W W W W W P P P P P T
40 A A A A A A A A A A A A A A A A A A E T
25 A A A A A A A A A A A A A A A A A A E E T
20 A A A A A A A A A A A A A A A A A A A E E T
15 A A A A A A A A A A A A A A A A A A A A E E T
1800 1600 1400 1200 1050 900 750 600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
12 The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where
fouling and abrasion are negatively affecting their functionality.
159 Welds, attachments welds and cold formed piping parts shall be Post Weld Heat Treated; see TOSP-P038-EXE-DEC-0001-PIP-SPN-0026 Specification for
Shop and Field Fabrication of Piping.
165 Piping class range DN 15 up to/including DN 600, design is based on the full rating of the flange material. Piping components for sizes DN 650 and up are
limited by the service design conditions. These components should be investigated for their suitability in piping systems where the design conditions exceed
the limits.
167 Non extended bonnet valves shall be used for short term low temperature excursion (e.g. non operable during depressurization) or for non insulated piping
only.
169 Spectacle blinds shall not be installed in pipes with operating temperatures below 0 deg C and at places where the temperature is below the dew point. In
both cases, the spades shall be used instead.
178 Piping Class Design Meets Half Vacuum at 250degC
X02 Item P15 with NACE TM0284 requirement.
X19 For items with size DN 1600 and above, the specification are referred to TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Specification for Piping Construction
Standard.
Revision Number : 0
Page : 5 / 11
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 800 900 1050 1200 1400
Pipes & Tubes

P5 PAATFQZPEEV 0F3Q 0H3Q 1A3Q 1F3Q
P10 PAATFQZBEEV 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
P15 PAATEGZBEGE 3K3R 3M3S 3R3S 4M3S 4T3S 5R1L
Butterfly Valves
VY105 LJBUAMERFBFBNH 3N3K 3N3M 3N3R
VY106 LJBUAMERFADBNH JW3K JW3M JW3R JW4M JW4T JW5R
Check Valves
VC110 LRBDAMERFZFE HC1M HC1P HC1R HC1T HC2K HC2P
VC114 LRBDAMERFZFE ZZ3K ZZ3M ZZ3R
VC125 LKBEDEERFAJDJ ZZ0F ZZ0H ZZ1A ZZ1F
VC127 LNBBAMERFAJEW ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K
Gate Valves
VG137 VJBJDEERFBFEJB HH0F HH0H HH1A HH1F
VG138 VJBJDEERFAGEJB HH0F HH0H HH1A HH1F
VG139 VQBHAMERFBFEJB ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
VG140 VQBHAMERFAJEJB ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
VG142 VQBHAMERFBFBJB ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VG143 VQBHAMERFAJBJB ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Globe Valves
VL148 VTBQDEERFAJEKT HY0F HY0H HY1A HY1F
VL149 VTBQDEERFAGEKT HY0F HY0H HY1A HY1F
VL150 VUBNAMERFAJEKT ZZ2A ZZ3A ZZ4A ZZ6A
VL151 VUBNAMERFBFEKT ZZ2A ZZ3A ZZ4A ZZ6A
VL152 VUBNAMERFAJBKT ZZ8A
VL153 VUBNAMERFBFBKT ZZ8A
Flanges
F305 FEALDEERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
F310 FEAKDEERF ZZ3K ZZ3M ZZ3R
F315 FEANDEERF
F325 FLALDEERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
F330 FLAKDEERFZZ 3K3R 3M3S 3R3S 4M3S
F331 FLAQDEERFZZ
F335 FLALDEFRFZZ 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
BW Fittings
B405 NBAFLEBEAF 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
B410 NBAFHNBEAG 3K3R 3M3S 3R3S 4M3S 4T3S
B415 NCAFLEBEAF 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
B420 NCAFHNBEAG 3K3R 3M3S 3R3S 4M3S 4T3S
B421 NCBWHNBEAG 5R1L
B422 NCAJHNBEAG
B425 NAAFLEBEAF 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E 3K3R 3M3S 3R3S
B450 NHAFLEBEAF 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E 2P3E
B455 NHAFHNBEAG 3K3R 3M3S 3R3S
B456 NHBWHNBEAD 5R1L
B457 NHAJHNBEAD
B475 MCAFHNBEAD 3R3S
Gaskets
G605 GAANDUERFDG 3K0C 3M0C 3R0C 4M0C
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
G615 GAANDUERFDN
G620 GEASDUFRFDJ 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
D720 FAAMGVERT AS0F AS0H AS1A AS1F AS2A AS3A AS4A AS6A AS8A AS1K AS1M AS1P AS1R AS1T AS2K AS2P
D735 FAAMGXERT AU3K AU3M AU3R AU4M
D740 FBAMGVERT AS0F AS0H AS1A AS1F AS2A AS3A AS4A AS6A AS8A AS1K AS1M AS1P AS1R AS1T AS2K AS2P
D755 FBAMGVERT AU3K AU3M AU3R AU4M
D770 FCAMGVERT AS0F AS0H AS1A AS1F AS2A AS3A AS4A AS6A AS8A AS1K
Revision Number : 0
Page : 6 / 11
Nominal Pipe Size
Short Code PMRC 1600 1800
Pipes & Tubes

P5 PAATFQZPEEV
P10 PAATFQZBEEV
P15 PAATEGZBEGE 6P2H 7M2K
Butterfly Valves
VY105 LJBUAMERFBFBNH
VY106 LJBUAMERFADBNH JW6P
Check Valves
VC110 LRBDAMERFZFE
VC114 LRBDAMERFZFE
VC125 LKBEDEERFAJDJ
VC127 LNBBAMERFAJEW
Gate Valves
VG137 VJBJDEERFBFEJB
VG138 VJBJDEERFAGEJB
VG139 VQBHAMERFBFEJB
VG140 VQBHAMERFAJEJB
VG142 VQBHAMERFBFBJB
VG143 VQBHAMERFAJBJB
Globe Valves
VL148 VTBQDEERFAJEKT
VL149 VTBQDEERFAGEKT
VL150 VUBNAMERFAJEKT
VL151 VUBNAMERFBFEKT
VL152 VUBNAMERFAJBKT
VL153 VUBNAMERFBFBKT
Flanges
F305 FEALDEERF
F310 FEAKDEERF
F315 FEANDEERF ZZ6P
F325 FLALDEERFZZ
F330 FLAKDEERFZZ
F331 FLAQDEERFZZ 6P2H 7M2K
F335 FLALDEFRFZZ
BW Fittings
B405 NBAFLEBEAF
B410 NBAFHNBEAG
B415 NCAFLEBEAF
B420 NCAFHNBEAG
B421 NCBWHNBEAG
B422 NCAJHNBEAG 6P2H
B425 NAAFLEBEAF
B450 NHAFLEBEAF
B455 NHAFHNBEAG
B456 NHBWHNBEAD
B457 NHAJHNBEAD 6P2H
B475 MCAFHNBEAD
Gaskets
G605 GAANDUERFDG
G610 GEASDUERFDJ
G615 GAANDUERFDN 6P0C 7M0C
G620 GEASDUFRFDJ
D720 FAAMGVERT
D735 FAAMGXERT
D740 FBAMGVERT
D755 FBAMGVERT
D770 FCAMGVERT
Revision Number : 0
Page : 7 / 11
Reducing Component
20 x 15 NEAFLEBEAF0H3Q0F3Q NFAFLEBEAF0H3Q0F3Q NJAFLEBEAF0H3Q0F3Q

25 x 15 NEAFLEBEAF1A3Q0F3Q NFAFLEBEAF1A3Q0F3Q NJAFLEBEAF1A3Q0F3Q
25 x 20 NEAFLEBEAF1A3Q0H3Q NFAFLEBEAF1A3Q0H3Q NJAFLEBEAF1A3Q0H3Q
40 x 15 NEAFLEBEAF1F3Q0F3Q NFAFLEBEAF1F3Q0F3Q NMAGDEERFZZ1F0F3Q NNAGDCPECG1F3Q0F3Q
40 x 20 NEAFLEBEAF1F3Q0H3Q NFAFLEBEAF1F3Q0H3Q NJAFLEBEAF1F3Q0H3Q
40 x 25 NEAFLEBEAF1F3Q1A3Q NFAFLEBEAF1F3Q1A3Q NJAFLEBEAF1F3Q1A3Q
50 x 15 NMAGDEERFZZ2A0F3Q NNAGDCPECG2A3K0F3Q
50 x 20 NEAFLEBEAF2A3K0H3Q NFAFLEBEAF2A3K0H3Q NMAGDEERFZZ2A0H3Q NNAGDCPECG2A3K0H3Q
50 x 25 NEAFLEBEAF2A3K1A3Q NFAFLEBEAF2A3K1A3Q NJAFLEBEAF2A3K1A3Q
50 x 40 NEAFLEBEAF2A3K1F3Q NFAFLEBEAF2A3K1F3Q NJAFLEBEAF2A3K1F3Q
80 x 15 NMAGDEERFZZ3A0F3Q NNAGDCPECG3A3K0F3Q
80 x 20 NMAGDEERFZZ3A0H3Q NNAGDCPECG3A3K0H3Q
80 x 25 NMAGDEERFZZ3A1A3Q NNAGDCPECG3A3K1A3Q
80 x 40 NEAFLEBEAF3A3K1F3Q NFAFLEBEAF3A3K1F3Q NMAGDEERFZZ3A1F3Q NNAGDCPECG3A3K1F3Q
80 x 50 NEAFLEBEAF3A3K2A3K NFAFLEBEAF3A3K2A3K
100 x 15 NMAGDEERFZZ4A0F3Q NNAGDCPECG4A3G0F3Q
100 x 20 NMAGDEERFZZ4A0H3Q NNAGDCPECG4A3G0H3Q
100 x 25 NMAGDEERFZZ4A1A3Q NNAGDCPECG4A3G1A3Q
100 x 40 NEAFLEBEAF4A3G1F3Q NFAFLEBEAF4A3G1F3Q NMAGDEERFZZ4A1F3Q NNAGDCPECG4A3G1F3Q
100 x 50 NEAFLEBEAF4A3G2A3K NFAFLEBEAF4A3G2A3K
150 x 20 NMAGDEERFZZ6A0H3Q NNAGDCPECG6A3G0H3Q
150 x 25 NMAGDEERFZZ6A1A3Q NNAGDCPECG6A3G1A3Q
150 x 100 NEAFLEBEAF6A3G4A3G NFAFLEBEAF6A3G4A3G
200 x 15 NMAGDEERFZZ8A0F3Q NNAGDCPECG8A3F0F3Q
200 x 20 NMAGDEERFZZ8A0H3Q NNAGDCPECG8A3F0H3Q
200 x 25 NMAGDEERFZZ8A1A3Q NNAGDCPECG8A3F1A3Q
200 x 40 NMAGDEERFZZ8A1F3Q NNAGDCPECG8A3F1F3Q
200 x 100 NEAFLEBEAF8A3F4A3G NFAFLEBEAF8A3F4A3G
200 x 150 NEAFLEBEAF8A3F6A3G NFAFLEBEAF8A3F6A3G
250 x 15 NMAGDEERFZZ1K0F3Q NNAGDCPECG1K3F0F3Q
250 x 20 NMAGDEERFZZ1K0H3Q NNAGDCPECG1K3F0H3Q
250 x 25 NMAGDEERFZZ1K1A3Q NNAGDCPECG1K3F1A3Q
250 x 40 NMAGDEERFZZ1K1F3Q NNAGDCPECG1K3F1F3Q
250 x 100 NEAFLEBEAF1K3F4A3G NFAFLEBEAF1K3F4A3G
250 x 150 NEAFLEBEAF1K3F6A3G NFAFLEBEAF1K3F6A3G
250 x 200 NEAFLEBEAF1K3F8A3F NFAFLEBEAF1K3F8A3F
300 x 15 NMAGDEERFZZ1M0F3Q NNAGDCPECG1M3F0F3Q
300 x 20 NMAGDEERFZZ1M0H3Q NNAGDCPECG1M3F0H3Q
300 x 25 NMAGDEERFZZ1M1A3Q NNAGDCPECG1M3F1A3Q
300 x 40 NMAGDEERFZZ1M1F3Q NNAGDCPECG1M3F1F3Q
300 x 50 NKAGDEBEAK1M3F2A3K
300 x 100 NKAGDEBEAK1M3F4A3G
300 x 150 NEAFLEBEAF1M3F6A3G NFAFLEBEAF1M3F6A3G NJAFLEBEAF1M3F6A3G
300 x 200 NEAFLEBEAF1M3F8A3F NFAFLEBEAF1M3F8A3F NJAFLEBEAF1M3F8A3F
300 x 250 NEAFLEBEAF1M3F1K3F NFAFLEBEAF1M3F1K3F NJAFLEBEAF1M3F1K3F
350 x 15 NMAGDEERFZZ1P0F3Q NNAGDCPECG1P3E0F3Q
350 x 20 NMAGDEERFZZ1P0H3Q NNAGDCPECG1P3E0H3Q
350 x 25 NMAGDEERFZZ1P1A3Q NNAGDCPECG1P3E1A3Q
350 x 50 NKAGDEBEAK1P3E2A3K
350 x 100 NKAGDEBEAK1P3E4A3G
350 x 150 NEAFLEBEAF1P3E6A3G NFAFLEBEAF1P3E6A3G NKAGDEBEAK1P3E6A3G
350 x 200 NEAFLEBEAF1P3E8A3F NFAFLEBEAF1P3E8A3F NJAFLEBEAF1P3E8A3F
350 x 250 NEAFLEBEAF1P3E1K3F NFAFLEBEAF1P3E1K3F NJAFLEBEAF1P3E1K3F
Revision Number : 0
Page : 8 / 11
350 x 300 NEAFLEBEAF1P3E1M3F NFAFLEBEAF1P3E1M3F NJAFLEBEAF1P3E1M3F

400 x 15 NMAGDEERFZZ1R0F3Q NNAGDCPECG1R3E0F3Q
400 x 20 NMAGDEERFZZ1R0H3Q NNAGDCPECG1R3E0H3Q
400 x 25 NMAGDEERFZZ1R1A3Q NNAGDCPECG1R3E1A3Q
400 x 40 NMAGDEERFZZ1R1F3Q NNAGDCPECG1R3E1F3Q
400 x 50 NKAGDEBEAK1R3E2A3K
400 x 80 NKAGDEBEAK1R3E3A3K
400 x 100 NKAGDEBEAK1R3E4A3G
400 x 150 NKAGDEBEAK1R3E6A3G
400 x 200 NEAFLEBEAF1R3E8A3F NFAFLEBEAF1R3E8A3F NKAGDEBEAK1R3E8A3F
400 x 250 NEAFLEBEAF1R3E1K3F NFAFLEBEAF1R3E1K3F NJAFLEBEAF1R3E1K3F
400 x 300 NEAFLEBEAF1R3E1M3F NFAFLEBEAF1R3E1M3F NJAFLEBEAF1R3E1M3F
400 x 350 NEAFLEBEAF1R3E1P3E NFAFLEBEAF1R3E1P3E NJAFLEBEAF1R3E1P3E
450 x 15 NMAGDEERFZZ1T0F3Q NNAGDCPECG1T3E0F3Q
450 x 20 NMAGDEERFZZ1T0H3Q NNAGDCPECG1T3E0H3Q
450 x 25 NMAGDEERFZZ1T1A3Q NNAGDCPECG1T3E1A3Q
450 x 40 NMAGDEERFZZ1T1F3Q NNAGDCPECG1T3E1F3Q
450 x 50 NKAGDEBEAK1T3E2A3K
450 x 80 NKAGDEBEAK1T3E3A3K
450 x 100 NKAGDEBEAK1T3E4A3G
450 x 150 NKAGDEBEAK1T3E6A3G
450 x 200 NKAGDEBEAK1T3E8A3F
450 x 250 NEAFLEBEAF1T3E1K3F NFAFLEBEAF1T3E1K3F NJAFLEBEAF1T3E1K3F
450 x 300 NEAFLEBEAF1T3E1M3F NFAFLEBEAF1T3E1M3F NJAFLEBEAF1T3E1M3F
450 x 350 NEAFLEBEAF1T3E1P3E NFAFLEBEAF1T3E1P3E NJAFLEBEAF1T3E1P3E
450 x 400 NEAFLEBEAF1T3E1R3E NFAFLEBEAF1T3E1R3E NJAFLEBEAF1T3E1R3E
500 x 15 NMAGDEERFZZ2K0F3Q NNAGDCPECG2K3E0F3Q
500 x 20 NMAGDEERFZZ2K0H3Q NNAGDCPECG2K3E0H3Q
500 x 25 NMAGDEERFZZ2K1A3Q NNAGDCPECG2K3E1A3Q
500 x 40 NMAGDEERFZZ2K1F3Q NNAGDCPECG2K3E1F3Q
500 x 50 NKAGDEBEAK2K3E2A3K
500 x 80 NKAGDEBEAK2K3E3A3K
500 x 100 NKAGDEBEAK2K3E4A3G
500 x 150 NKAGDEBEAK2K3E6A3G
500 x 200 NKAGDEBEAK2K3E8A3F
500 x 250 NKAGDEBEAK2K3E1K3F
500 x 300 NEAFLEBEAF2K3E1M3F NFAFLEBEAF2K3E1M3F NJAFLEBEAF2K3E1M3F
500 x 350 NEAFLEBEAF2K3E1P3E NFAFLEBEAF2K3E1P3E NJAFLEBEAF2K3E1P3E
500 x 400 NEAFLEBEAF2K3E1R3E NFAFLEBEAF2K3E1R3E NJAFLEBEAF2K3E1R3E
500 x 450 NEAFLEBEAF2K3E1T3E NFAFLEBEAF2K3E1T3E NJAFLEBEAF2K3E1T3E
600 x 20 NMAGDEERFZZ2P0H3Q NNAGDCPECG2P3E0H3Q
600 x 25 NMAGDEERFZZ2P1A3Q NNAGDCPECG2P3E1A3Q
600 x 200 NKAGDEBEAK2P3E8A3F
600 x 250 NKAGDEBEAK2P3E1K3F
600 x 300 NJAFLEBEAF2P3E1M3F
600 x 350 NJAFLEBEAF2P3E1P3E
600 x 400 NEAFLEBEAF2P3E1R3E NFAFLEBEAF2P3E1R3E NJAFLEBEAF2P3E1R3E
600 x 450 NEAFLEBEAF2P3E1T3E NFAFLEBEAF2P3E1T3E NJAFLEBEAF2P3E1T3E
600 x 500 NEAFLEBEAF2P3E2K3E NFAFLEBEAF2P3E2K3E NJAFLEBEAF2P3E2K3E
750 x 15 NMAGDEERFZZ3K0F3Q NNAGDCPECG3K3R0F3Q
750 x 20 NMAGDEERFZZ3K0H3Q NNAGDCPECG3K3R0H3Q
750 x 25 NMAGDEERFZZ3K1A3Q NNAGDCPECG3K3R1A3Q
750 x 40 NMAGDEERFZZ3K1F3Q NNAGDCPECG3K3R1F3Q
Revision Number : 0
Page : 9 / 11
750 x 50 NKAGDEBEAK3K3R2A3K
750 x 80 NKAGDEBEAK3K3R3A3K
750 x 100 NKAGDEBEAK3K3R4A3G
750 x 150 NKAGDEBEAK3K3R6A3G
750 x 200 NKAGDEBEAK3K3R8A3F
750 x 250 NKAGDEBEAK3K3R1K3F
750 x 300 NKAGDEBEAK3K3R1M3F
750 x 350 NKAGDEBEAK3K3R1P3E
750 x 400 NJAFHNBEAG3K3R1R3E
750 x 450 NJAFHNBEAG3K3R1T3E
750 x 500 NJAFHNBEAG3K3R2K3E
750 x 600 NEAFHNBEAG3K3R2P3E NFAFHNBEAG3K3R2P3E NJAFHNBEAG3K3R2P3E
900 x 15 NMAGDEERFZZ3R0F3Q NNAGDCPECG3R3S0F3Q
900 x 20 NMAGDEERFZZ3R0H3Q NNAGDCPECG3R3S0H3Q
900 x 25 NMAGDEERFZZ3R1A3Q NNAGDCPECG3R3S1A3Q
900 x 40 NMAGDEERFZZ3R1F3Q NNAGDCPECG3R3S1F3Q
900 x 50 NKAGDEBEAK3R3S2A3K
900 x 80 NKAGDEBEAK3R3S3A3K
900 x 100 NKAGDEBEAK3R3S4A3G
900 x 150 NKAGDEBEAK3R3S6A3G
900 x 200 NKAGDEBEAK3R3S8A3F
900 x 250 NKAGDEBEAK3R3S1K3F
900 x 300 NKAGDEBEAK3R3S1M3F
900 x 350 NKAGDEBEAK3R3S1P3E
900 x 400 NKAGDEBEAK3R3S1R3E
900 x 450 NJAFHNBEAG3R3S1T3E
900 x 500 NJAFHNBEAG3R3S2K3E
900 x 600 NFAFHNBEAG3R3S2P3E NJAFHNBEAG3R3S2P3E
900 x 750 NEAFHNBEAG3R3S3K3R NFAFHNBEAG3R3S3K3R NJAFHNBEAG3R3S3K3R
1400 x 300 NKAGDEBEAK5R1L1M3F
1400 x 600 NFBWHNBEAD5R1L2P3E
1400 x 900 NFBWHNBEAD5R1L3R3S
1400 x 1050 NFBWHNBEAD5R1L4M3S
1600 x 15 NMAGDEERFZZ6P0F3Q
1600 x 25 NMAGDEERFZZ6P1A3Q
1600 x 750 NFAJHNBEAG6P2H3K3R
1600 x 900 NFAJHNBEAG6P2H3R3S
1600 x 1400 NFAJHNBEAG6P2H5R1L
1800 x 1600 NFAJHNBEAG7M2K6P2H
Revision Number : 0
Page : 10 / 11
BLT FOR BLIND/SPACER BLT FOR STD FLG BLT FOR STD FLG
15 4 1/2 x 70 BAAAAEZZ0F0Q 15 4 1/2 x 70 BAAAAEZZ0F0Q 200 8 3/4 x 120 BAAAAEZZ0H1E

20 4 1/2 x 80 BAAAAEZZ0F0S 20 4 1/2 x 70 BAAAAEZZ0F0Q 200 8 3/4 x 130 BAAAAEZZ0H1G
25 4 1/2 x 80 BAAAAEZZ0F0S 20 4 1/2 x 80 BAAAAEZZ0F0S 200 8 7/8 x 160 BAAAAEZZ0J1N
40 4 1/2 x 80 BAAAAEZZ0F0S 20 4 5/8 x 80 BAAAAEZZ0G0S 250 8 7/8 x 130 BAAAAEZZ0J1G
50 4 5/8 x 100 BAAAAEZZ0G1A 25 4 1/2 x 70 BAAAAEZZ0F0Q 250 8 7/8 x 150 BAAAAEZZ0J1L
80 4 5/8 x 110 BAAAAEZZ0G1C 25 4 5/8 x 100 BAAAAEZZ0G1A 250 16 1 x 180 BAAAAEZZ1A1S
100 8 5/8 x 110 BAAAAEZZ0G1C 40 4 1/2 x 80 BAAAAEZZ0F0S 300 8 7/8 x 130 BAAAAEZZ0J1G
150 8 3/4 x 120 BAAAAEZZ0H1E 40 4 1/2 x 90 BAAAAEZZ0F0U 300 8 7/8 x 150 BAAAAEZZ0J1L
200 8 3/4 x 130 BAAAAEZZ0H1G 40 4 5/8 x 100 BAAAAEZZ0G1A 300 20 1-1/8 x 190 BAAAAEZZ1B1U
300 12 7/8 x 150 BAAAAEZZ0J1L 40 8 3/4 x 120 BAAAAEZZ0H1E 350 12 1 x 140 BAAAAEZZ1A1J
400 16 1 x 170 BAAAAEZZ1A1Q 50 4 5/8 x 90 BAAAAEZZ0G0U 350 16 1 x 170 BAAAAEZZ1A1Q
500 20 1-1/8 x 200 BAAAAEZZ1B2A 50 4 5/8 x 100 BAAAAEZZ0G1A 350 20 1-1/8 x 190 BAAAAEZZ1B1U
600 20 1-1/4 x 220 BAAAAEZZ1D2E 50 8 5/8 x 130 BAAAAEZZ0G1G 350 20 1-1/8 x 200 BAAAAEZZ1B2A
900 32 1-1/2 x 340 BAAAAEZZ1F3J 50 8 3/4 x 120 BAAAAEZZ0H1E 400 16 1 x 150 BAAAAEZZ1A1L
1050 36 1-1/2 x 360 BAAAAEZZ1F3N 80 4 5/8 x 100 BAAAAEZZ0G1A 400 16 1 x 170 BAAAAEZZ1A1Q
80 8 5/8 x 110 BAAAAEZZ0G1C 400 20 1-1/8 x 160 BAAAAEZZ1B1N
80 8 3/4 x 120 BAAAAEZZ0H1E 400 20 1-1/8 x 190 BAAAAEZZ1B1U
80 8 3/4 x 140 BAAAAEZZ0H1J 400 20 1-1/8 x 200 BAAAAEZZ1B2A
100 8 5/8 x 100 BAAAAEZZ0G1A 400 20 1-1/4 x 210 BAAAAEZZ1D2C
100 8 5/8 x 110 BAAAAEZZ0G1C 450 20 1-1/8 x 190 BAAAAEZZ1B1U
100 8 3/4 x 120 BAAAAEZZ0H1E 450 20 1-1/8 x 200 BAAAAEZZ1B2A
100 8 3/4 x 140 BAAAAEZZ0H1J 450 20 1-1/4 x 220 BAAAAEZZ1D2E
150 8 3/4 x 110 BAAAAEZZ0H1C 500 20 1-1/8 x 170 BAAAAEZZ1B1Q
150 8 3/4 x 120 BAAAAEZZ0H1E 500 20 1-1/8 x 200 BAAAAEZZ1B2A
150 8 3/4 x 140 BAAAAEZZ0H1J 500 20 1-1/4 x 220 BAAAAEZZ1D2E
Revision Number : 0
Page : 11 / 11
BLT FOR STD FLG

DN nr inch x mm PMRC
500 20 1-1/4 x 230 BAAAAEZZ1D2G

600 20 1-1/4 x 180 BAAAAEZZ1D1S
600 20 1-1/4 x 220 BAAAAEZZ1D2E
600 32 1-1/2 x 260 BAAAAEZZ1F2N
750 28 1-1/4 x 240 BAAAAEZZ1D2J
750 28 1-1/4 x 290 BAAAAEZZ1D2U
900 32 1-1/2 x 290 BAAAAEZZ1F2U
900 36 1-1/2 x 340 BAAAAEZZ1F3J
1000 32 1-1/2 x 290 BAAAAEZZ1F2U
1050 36 1-1/2 x 310 BAAAAEZZ1F3C
1050 44 1-1/2 x 360 BAAAAEZZ1F3N
1600 16 1 x 300 BAAAAEZZ1A3A
1600 16 1 x 360 BAAAAEZZ1A3N
P_NOSBL
1C136DF
Revision: 0
Issue Date : Jun 16, 2022
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 9

Temperature (oC) 0 50 75 100
Pressure (barG)
DN 15 to 600 19.6 19.2 18.4 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500 600
S-20 S-STD S-20 S-XS

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE, ASTM A106-B, Seamless PPPABQPEACRAAGZ
P10 50 - 600 / - Pipe, ASME B36.10M, BE, ASTM A106-B, Seamless PPPABQBEACRAAGZ
Butterfly Valves
VY132 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat B, CL 150, RF-, Wrench, ASTM A216-WCB, SS, PTFE, VYLAA2DRFEACD3CBZZZZZ
ALY625 Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs,
ASTM A194 Grade 8M Nuts
VY142 200 - 600 / - Bfly Vlv Lug Type, API 609 Cat B, CL 150, RF-, Bevel Gear Operator, ASTM A216-WCB, VYLAA2DRFAACD3CBZZZZZ
SS, PTFE, ALY625 Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Bolts/Studs, ASTM A194 Grade 8M Nuts
Check Valves
VC144 300 - 600 / - Lug Check Dual Pl, API 594, CL 150, RF, ASTM A216-WCB, AISI 410, Stellite 6 Trim VCWEAA2DRFZACDBCEZZZZ
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Globe Valves
Grade 2H Nuts
2H Nuts
A194 Grade 2H Nuts
Ball Valves
VB205 200 - 300 / - Ball Vlv Std Ptn FB, API 6D, CL 150, RF, Trunnion Mounted Ball, Bolted (Non-Extended), VB9AA9DRFMAACD2BKZZZZ
Bevel Gear Operator, ASTM A216-WCB, AISI 316, Filled PTFE Trim, Elastomeric/Graphite
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VB210 150 - 150 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLEAADRF8CACD1GRZZZZ
Flanges
BW Fittings
Revision Number : 0
Page : 3 / 9

Forged Fittings
Gaskets
Bolts & Nuts
Revision Number : 0
Page : 4 / 9

Legend and chart

500 E T E Red. Tee
350 E E E E T
W Weldolet
300 E E E E E T
250 W W E E E E T
200 W W W W E E E T
100 W W W W W W E E P T
80 W W W W W W W W P P T
50 W W W W W W W W P P P T
40 A A A A A A A A A A A E T
20 A A A A A A A A A A A A E E T
15 A A A A A A A A A A A A A E E T
600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
11 Piping class range DN 15 up to/incl DN 600 design meets full vacuum at ambient condition. For DN 750 to 1200 if vacuum condition can occur piping to
be designed accordingly.
25 Design limits acc. to BS EN 593 butterfly valve rating.
Revision Number : 0
Page : 5 / 9
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600
Pipes & Tubes

P10 PAATFPZBEEX 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
Butterfly Valves
VY132 LGBUBKERFZDPJ ZZ3A ZZ4A ZZ6A
VY142 LGBUBKERFZBPJ ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Check Valves
VC144 LQBDDAERFZRC ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Gate Valves
VG162 VQBHBKERFAJEHR ZZ2A
Globe Valves
VL196 VUBNBKERFAJBKM ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R
Ball Valves
VB205 VDAXBKERFBABAJ ZZ8A ZZ1K ZZ1M
VB210 VEAVBKERFAZCUA ZZ6A
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
F325 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
F330 FLALDCFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
B415 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
B425 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
B450 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3F 1P3E 1R3E 1T3R 2K3E 2P3S
Gaskets
G615 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
D730 FAAMGXERT AR1M AR1P AR1R AR1T AR2K AR2P
D750 FBAMGXERT AR1M AR1P AR1R AR1T AR2K AR2P
D780 FCAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K
Revision Number : 0
Page : 6 / 9
Reducing Component

50 x 15 NMAGDCERFZZ2A0F3K NNAGDCPECF2A3K0F3K
50 x 20 NEAFKRBEAN2A3K0H3K NFAFKRBEAN2A3K0H3K NMAGDCERFZZ2A0H3K NNAGDCPECF2A3K0H3K
200 x 50 NKAGDCBEZZ8A3E2A3K
250 x 50 NKAGDCBEZZ1K3E2A3K
300 x 15 NMAGDCERFZZ1M0F3K NNAGDCPECF1M3F0F3K
300 x 20 NMAGDCERFZZ1M0H3K NNAGDCPECF1M3F0H3K
300 x 25 NMAGDCERFZZ1M1A3K NNAGDCPECF1M3F1A3K
300 x 40 NMAGDCERFZZ1M1F3K NNAGDCPECF1M3F1F3K
300 x 200 NEAFKRBEAN1M3F8A3E NFAFKRBEAN1M3F8A3E NJAFKRBEAN1M3F8A3E
300 x 250 NEAFKRBEAN1M3F1K3E NFAFKRBEAN1M3F1K3E NJAFKRBEAN1M3F1K3E
350 x 15 NMAGDCERFZZ1P0F3K NNAGDCPECF1P3E0F3K
350 x 20 NMAGDCERFZZ1P0H3K NNAGDCPECF1P3E0H3K
350 x 25 NMAGDCERFZZ1P1A3K NNAGDCPECF1P3E1A3K
350 x 50 NKAGDCBEZZ1P3E2A3K
Revision Number : 0
Page : 7 / 9
350 x 80 NKAGDCBEZZ1P3E3A3G
350 x 150 NEAFKRBEAN1P3E6A3G NFAFKRBEAN1P3E6A3G NKAGDCBEZZ1P3E6A3G
350 x 200 NEAFKRBEAN1P3E8A3E NFAFKRBEAN1P3E8A3E NJAFKRBEAN1P3E8A3E
350 x 250 NEAFKRBEAN1P3E1K3E NFAFKRBEAN1P3E1K3E NJAFKRBEAN1P3E1K3E
350 x 300 NEAFKRBEAN1P3E1M3F NFAFKRBEAN1P3E1M3F NJAFKRBEAN1P3E1M3F
400 x 15 NMAGDCERFZZ1R0F3K NNAGDCPECF1R3E0F3K
400 x 20 NMAGDCERFZZ1R0H3K NNAGDCPECF1R3E0H3K
400 x 25 NMAGDCERFZZ1R1A3K NNAGDCPECF1R3E1A3K
400 x 50 NKAGDCBEZZ1R3E2A3K
400 x 80 NKAGDCBEZZ1R3E3A3G
400 x 200 NEAFKRBEAN1R3E8A3E NFAFKRBEAN1R3E8A3E NKAGDCBEZZ1R3E8A3E
400 x 250 NEAFKRBEAN1R3E1K3E NFAFKRBEAN1R3E1K3E NJAFKRBEAN1R3E1K3E
400 x 300 NEAFKRBEAN1R3E1M3F NFAFKRBEAN1R3E1M3F NJAFKRBEAN1R3E1M3F
400 x 350 NEAFKRBEAN1R3E1P3E NFAFKRBEAN1R3E1P3E NJAFKRBEAN1R3E1P3E
450 x 15 NMAGDCERFZZ1T0F3K NNAGDCPECF1T3R0F3K
450 x 20 NMAGDCERFZZ1T0H3K NNAGDCPECF1T3R0H3K
450 x 25 NMAGDCERFZZ1T1A3K NNAGDCPECF1T3R1A3K
450 x 40 NMAGDCERFZZ1T1F3K NNAGDCPECF1T3R1F3K
450 x 50 NKAGDCBEZZ1T3R2A3K
450 x 80 NKAGDCBEZZ1T3R3A3G
450 x 200 NKAGDCBEZZ1T3R8A3E
450 x 250 NEAFKRBEAN1T3R1K3E NFAFKRBEAN1T3R1K3E NJAFKRBEAN1T3R1K3E
450 x 300 NEAFKRBEAN1T3R1M3F NFAFKRBEAN1T3R1M3F NJAFKRBEAN1T3R1M3F
450 x 350 NEAFKRBEAN1T3R1P3E NFAFKRBEAN1T3R1P3E NJAFKRBEAN1T3R1P3E
450 x 400 NEAFKRBEAN1T3R1R3E NFAFKRBEAN1T3R1R3E NJAFKRBEAN1T3R1R3E
500 x 200 NKAGDCBEZZ2K3E8A3E
500 x 250 NKAGDCBEZZ2K3E1K3E
500 x 300 NEAFKRBEAN2K3E1M3F NFAFKRBEAN2K3E1M3F NJAFKRBEAN2K3E1M3F
500 x 350 NEAFKRBEAN2K3E1P3E NFAFKRBEAN2K3E1P3E NJAFKRBEAN2K3E1P3E
500 x 400 NEAFKRBEAN2K3E1R3E NFAFKRBEAN2K3E1R3E NJAFKRBEAN2K3E1R3E
500 x 450 NEAFKRBEAN2K3E1T3R NFAFKRBEAN2K3E1T3R NJAFKRBEAN2K3E1T3R
600 x 15 NMAGDCERFZZ2P0F3K NNAGDCPECF2P3S0F3K
600 x 20 NMAGDCERFZZ2P0H3K NNAGDCPECF2P3S0H3K
600 x 25 NMAGDCERFZZ2P1A3K NNAGDCPECF2P3S1A3K
600 x 40 NMAGDCERFZZ2P1F3K NNAGDCPECF2P3S1F3K
600 x 50 NKAGDCBEZZ2P3S2A3K
600 x 80 NKAGDCBEZZ2P3S3A3G
600 x 200 NKAGDCBEZZ2P3S8A3E
600 x 250 NKAGDCBEZZ2P3S1K3E
600 x 300 NJAFKRBEAN2P3S1M3F
600 x 350 NJAFKRBEAN2P3S1P3E
600 x 400 NEAFKRBEAN2P3S1R3E NFAFKRBEAN2P3S1R3E NJAFKRBEAN2P3S1R3E
600 x 450 NEAFKRBEAN2P3S1T3R NFAFKRBEAN2P3S1T3R NJAFKRBEAN2P3S1T3R
Revision Number : 0
Page : 8 / 9
600 x 500 NEAFKRBEAN2P3S2K3E NFAFKRBEAN2P3S2K3E NJAFKRBEAN2P3S2K3E
BLT API594 WAFER LUG BLT API609 WAFER LUG BLT FOR BLIND/SPACER
50 4 5/8 x 150 BAAAAAZZ0G1L 80 4 5/8 x 140 BAAAAAZZ0G1J 15 4 1/2 x 70 BAAAAAZZ0F0Q

80 4 5/8 x 170 BAAAAAZZ0G1Q 100 8 5/8 x 160 BAAAAAZZ0G1N 20 4 1/2 x 80 BAAAAAZZ0F0S
100 8 5/8 x 170 BAAAAAZZ0G1Q 150 8 3/4 x 170 BAAAAAZZ0H1Q 25 4 1/2 x 80 BAAAAAZZ0F0S
150 8 3/4 x 210 BAAAAAZZ0H2C 200 8 3/4 x 180 BAAAAAZZ0H1S 40 4 1/2 x 80 BAAAAAZZ0F0S
200 8 3/4 x 240 BAAAAAZZ0H2J 250 12 7/8 x 200 BAAAAAZZ0J2A 50 4 5/8 x 100 BAAAAAZZ0G1A
250 12 7/8 x 270 BAAAAAZZ0J2Q 300 12 7/8 x 210 BAAAAAZZ0J2C 80 4 5/8 x 110 BAAAAAZZ0G1C
300 12 7/8 x 310 BAAAAAZZ0J3C 350 12 1 x 240 BAAAAAZZ1A2J 100 8 5/8 x 110 BAAAAAZZ0G1C
350 12 1 x 330 BAAAAAZZ1A3G 400 16 1 x 250 BAAAAAZZ1A2L 150 8 3/4 x 120 BAAAAAZZ0H1E
400 16 1 x 340 BAAAAAZZ1A3J 450 16 1-1/8 x 270 BAAAAAZZ1B2Q 200 8 3/4 x 130 BAAAAAZZ0H1G
450 16 1-1/8 x 360 BAAAAAZZ1B3N 500 20 1-1/8 x 300 BAAAAAZZ1B3A 250 12 7/8 x 140 BAAAAAZZ0J1J
500 20 1-1/8 x 390 BAAAAAZZ1B3U 600 20 1-1/4 x 340 BAAAAAZZ1D3J 300 12 7/8 x 150 BAAAAAZZ0J1L
600 20 1-1/4 x 410 BAAAAAZZ1D4B 750 28 1-1/2 x 410 BAAAAAZZ1F4B 350 12 1 x 160 BAAAAAZZ1A1N
750 28 1-1/4 x 550 BAAAAAZZ1D4U 900 32 1-1/2 x 480 BAAAAAZZ1F4N 400 16 1 x 170 BAAAAAZZ1A1Q
900 32 1-1/2 x 660 BAAAAAZZ1F6K 1050 36 1-1/2 x 540 BAAAAAZZ1F4T 450 16 1-1/8 x 180 BAAAAAZZ1B1S
1050 36 1-1/2 x 740 BAAAAAZZ1F6Q 1200 44 1-1/2 x 590 BAAAAAZZ1F5S 500 20 1-1/8 x 200 BAAAAAZZ1B2A
1200 44 1-1/2 x 850 BAAAAAZZ1F8Q 600 20 1-1/4 x 220 BAAAAAZZ1D2E
750 28 1-1/4 x 280 BAAAAAZZ1D2S
900 32 1-1/2 x 340 BAAAAAZZ1F3J
1050 36 1-1/2 x 360 BAAAAAZZ1F3N
1200 44 1-1/2 x 390 BAAAAAZZ1F3U
Revision Number : 0
Page : 9 / 9
BLT FOR STD FLG

15 4 1/2 x 60 BAAAAAZZ0F0N
20 4 1/2 x 70 BAAAAAZZ0F0Q
40 4 1/2 x 80 BAAAAAZZ0F0S
50 4 5/8 x 90 BAAAAAZZ0G0U
80 4 5/8 x 100 BAAAAAZZ0G1A
100 8 5/8 x 100 BAAAAAZZ0G1A
150 8 3/4 x 110 BAAAAAZZ0H1C
200 8 3/4 x 110 BAAAAAZZ0H1C
250 12 7/8 x 120 BAAAAAZZ0J1E
300 12 7/8 x 120 BAAAAAZZ0J1E
350 12 1 x 140 BAAAAAZZ1A1J
450 16 1-1/8 x 150 BAAAAAZZ1B1L
500 20 1-1/8 x 160 BAAAAAZZ1B1N
600 20 1-1/4 x 180 BAAAAAZZ1D1S
750 28 1-1/4 x 240 BAAAAAZZ1D2J
900 32 1-1/2 x 290 BAAAAAZZ1F2U
1050 36 1-1/2 x 300 BAAAAAZZ1F3A
1200 44 1-1/2 x 320 BAAAAAZZ1F3E
P_NOSBL
1C136DG
Revision: 0
Issue Date : Dec 07, 2021
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 7

Pressure (barG)
DN 15 to 450 19.6 19.2 18.4 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
Schedule S-XXS S-XXS S-XXS S-XXS S-160 S-160 S-80 S-80 S-60 S-60 S-40 S-40
400 450
S-XS S-XS

Pipes & Tubes
Butterfly Valves
VY132 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat B, CL 150, RF, Wrench , ASTM A216-WCB, SS, PTFE, VYLAA2DRFEACD3CBZZZZZ
ALY625 Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs,
VY138 200 - 300 / - Bfly Vlv Lug Type, API 609 Cat B, CL 150, RF, Bevel Gear Operator , ASTM A216-WCB, VYLAA2DRFAACD3CBZZZZZ
SS, PTFE, ALY625 Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Check Valves
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Globe Valves
Grade 2H Nuts
2H Nuts
A194 Grade 2H Nuts
Flanges
BW Fittings
Forged Fittings
Gaskets
Bolts & Nuts
Revision Number : 0
Page : 3 / 7

Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1C136DG_3_BR Legend:

400 E T E Red. Tee
250 E E E E T
W Weldolet
200 W W E E P T
150 W W W E P P T
100 W W W W P P P T
80 W P W W P P P P T
50 W W W W P P P P P T
450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
28 Piping class design meets full vacuum at ambient temperature condition.

Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450
Pipes & Tubes

P5 PAATFPZPEEX 0F3T 0H3T 1A3T 1F3T
P10 PAATFPZBEEX 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G 1P3G 1R3S 1T3S
Butterfly Valves
VY132 LGBUBKERFZDPJ ZZ3A ZZ4A ZZ6A
VY138 LGBUBKERFZBPJ ZZ8A ZZ1K ZZ1M
Check Valves
VC144 LQBDDAERFZRC ZZ1M
Gate Valves
Globe Valves
Flanges
F325 FLALDCERFZZ 0F3T 0H3T 1A3T 1F3T 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G 1P3G 1R3S 1T3S
BW Fittings
B405 NBAFKRBEAN 0F3T 0H3T 1A3T 1F3T 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G
B415 NCAFKRBEAN 0F3T 0H3T 1A3T 1F3T 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G
B425 NAAFKRBEAN 0F3T 0H3T 1A3T 1F3T 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G
B450 NHAFKRBEAN 0F3T 0H3T 1A3T 1F3T 2A3Q 3A3Q 4A3K 6A3K 8A3J 1K3J 1M3G
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D
D720 FAAMGVERT AR1M
D740 FBAMGVERT AR1M
Revision Number : 0
Page : 6 / 7
Reducing Component
20 x 15 NEAFKRBEAN0H3T0F3T NFAFKRBEAN0H3T0F3T NJAFKRBEAN0H3T0F3T

25 x 15 NEAFKRBEAN1A3T0F3T NFAFKRBEAN1A3T0F3T NJAFKRBEAN1A3T0F3T
25 x 20 NEAFKRBEAN1A3T0H3T NFAFKRBEAN1A3T0H3T NJAFKRBEAN1A3T0H3T
40 x 15 NEAFKRBEAN1F3T0F3T NFAFKRBEAN1F3T0F3T NMAGDCERFZZ1F0F3T
40 x 20 NEAFKRBEAN1F3T0H3T NFAFKRBEAN1F3T0H3T NJAFKRBEAN1F3T0H3T
40 x 25 NEAFKRBEAN1F3T1A3T NFAFKRBEAN1F3T1A3T NJAFKRBEAN1F3T1A3T
50 x 15 NMAGDCERFZZ2A0F3T
50 x 20 NEAFKRBEAN2A3Q0H3T NFAFKRBEAN2A3Q0H3T NMAGDCERFZZ2A0H3T
50 x 25 NEAFKRBEAN2A3Q1A3T NFAFKRBEAN2A3Q1A3T NJAFKRBEAN2A3Q1A3T
50 x 40 NEAFKRBEAN2A3Q1F3T NFAFKRBEAN2A3Q1F3T NJAFKRBEAN2A3Q1F3T
80 x 15 NMAGDCERFZZ3A0F3T NNAGDCPECF3A3Q0F3T
80 x 20 NMAGDCERFZZ3A0H3T NNAGDCPECF3A3Q0H3T
80 x 25 NMAGDCERFZZ3A1A3T NNAGDCPECF3A3Q1A3T
80 x 40 NEAFKRBEAN3A3Q1F3T NFAFKRBEAN3A3Q1F3T NMAGDCERFZZ3A1F3T NNAGDCPECF3A3Q1F3T
80 x 50 NEAFKRBEAN3A3Q2A3Q NFAFKRBEAN3A3Q2A3Q NJAFKRBEAN3A3Q2A3Q
100 x 15 NMAGDCERFZZ4A0F3T NNAGDCPECF4A3K0F3T
100 x 20 NMAGDCERFZZ4A0H3T NNAGDCPECF4A3K0H3T
100 x 25 NMAGDCERFZZ4A1A3T NNAGDCPECF4A3K1A3T
100 x 40 NEAFKRBEAN4A3K1F3T NFAFKRBEAN4A3K1F3T NMAGDCERFZZ4A1F3T NNAGDCPECF4A3K1F3T
150 x 20 NMAGDCERFZZ6A0H3T NNAGDCPECF6A3K0H3T
150 x 25 NMAGDCERFZZ6A1A3T NNAGDCPECF6A3K1A3T
200 x 15 NMAGDCERFZZ8A0F3T NNAGDCPECF8A3J0F3T
200 x 20 NMAGDCERFZZ8A0H3T NNAGDCPECF8A3J0H3T
200 x 25 NMAGDCERFZZ8A1A3T NNAGDCPECF8A3J1A3T
200 x 40 NMAGDCERFZZ8A1F3T NNAGDCPECF8A3J1F3T
200 x 100 NEAFKRBEAN8A3J4A3K NFAFKRBEAN8A3J4A3K NJAFKRBEAN8A3J4A3K
200 x 150 NEAFKRBEAN8A3J6A3K NFAFKRBEAN8A3J6A3K NJAFKRBEAN8A3J6A3K
250 x 15 NMAGDCERFZZ1K0F3T
250 x 20 NMAGDCERFZZ1K0H3T
250 x 25 NMAGDCERFZZ1K1A3T
250 x 40 NMAGDCERFZZ1K1F3T
250 x 100 NEAFKRBEAN1K3J4A3K NFAFKRBEAN1K3J4A3K NJAFKRBEAN1K3J4A3K
250 x 150 NEAFKRBEAN1K3J6A3K NFAFKRBEAN1K3J6A3K NJAFKRBEAN1K3J6A3K
250 x 200 NEAFKRBEAN1K3J8A3J NFAFKRBEAN1K3J8A3J NJAFKRBEAN1K3J8A3J
300 x 15 NMAGDCERFZZ1M0F3T
300 x 20 NMAGDCERFZZ1M0H3T
300 x 25 NMAGDCERFZZ1M1A3T
300 x 40 NMAGDCERFZZ1M1F3T
300 x 50 NKAGDCBEZZ1M3G2A3Q
300 x 80 NKAGDCBEZZ1M3G3A3Q
300 x 100 NKAGDCBEZZ1M3G4A3K
300 x 150 NEAFKRBEAN1M3G6A3K NFAFKRBEAN1M3G6A3K NJAFKRBEAN1M3G6A3K
300 x 200 NEAFKRBEAN1M3G8A3J NFAFKRBEAN1M3G8A3J NJAFKRBEAN1M3G8A3J
300 x 250 NEAFKRBEAN1M3G1K3J NFAFKRBEAN1M3G1K3J NJAFKRBEAN1M3G1K3J
350 x 150 NFAFKRBEAN1P3G6A3K
350 x 200 NFAFKRBEAN1P3G8A3J
350 x 250 NFAFKRBEAN1P3G1K3J
350 x 300 NFAFKRBEAN1P3G1M3G
400 x 200 NFAFKRBEAN1R3S8A3J
400 x 250 NFAFKRBEAN1R3S1K3J
400 x 300 NFAFKRBEAN1R3S1M3G
400 x 350 NFAFKRBEAN1R3S1P3G
450 x 250 NFAFKRBEAN1T3S1K3J
Revision Number : 0
Page : 7 / 7
450 x 300 NFAFKRBEAN1T3S1M3G

450 x 350 NFAFKRBEAN1T3S1P3G
450 x 400 NFAFKRBEAN1T3S1R3S
BLT API594 WAFER LUG BLT FOR BLIND/SPACER BLT FOR STD FLG
50 4 5/8 x 150 BAAAAAZZ0G1L 15 4 1/2 x 70 BAAAAAZZ0F0Q 15 4 1/2 x 70 BAAAAAZZ0F0Q

300 12 7/8 x 310 BAAAAAZZ0J3C 20 4 1/2 x 80 BAAAAAZZ0F0S 20 4 1/2 x 70 BAAAAAZZ0F0Q
350 12 1 x 330 BAAAAAZZ1A3G 25 4 1/2 x 80 BAAAAAZZ0F0S 25 4 1/2 x 70 BAAAAAZZ0F0Q
400 16 1 x 340 BAAAAAZZ1A3J 40 4 1/2 x 90 BAAAAAZZ0F0U 40 4 1/2 x 80 BAAAAAZZ0F0S
450 16 1-1/8 x 360 BAAAAAZZ1B3N 50 4 5/8 x 100 BAAAAAZZ0G1A 50 4 5/8 x 90 BAAAAAZZ0G0U
500 20 1-1/8 x 390 BAAAAAZZ1B3U 80 4 5/8 x 110 BAAAAAZZ0G1C 80 4 5/8 x 100 BAAAAAZZ0G1A
600 20 1-1/4 x 410 BAAAAAZZ1D4B 100 8 5/8 x 110 BAAAAAZZ0G1C 100 8 5/8 x 100 BAAAAAZZ0G1A
BLT API609 WAFER LUG 200 8 3/4 x 130 BAAAAAZZ0H1G 200 8 3/4 x 120 BAAAAAZZ0H1E
DN nr inch x mm PMRC 250 12 7/8 x 150 BAAAAAZZ0J1L 250 12 7/8 x 130 BAAAAAZZ0J1G
300 12 7/8 x 150 BAAAAAZZ0J1L 300 12 7/8 x 130 BAAAAAZZ0J1G
100 8 5/8 x 160 BAAAAAZZ0G1N 350 12 1 x 170 BAAAAAZZ1A1Q 350 12 1 x 140 BAAAAAZZ1A1J
150 8 3/4 x 170 BAAAAAZZ0H1Q 400 16 1 x 170 BAAAAAZZ1A1Q 400 16 1 x 150 BAAAAAZZ1A1L
200 8 3/4 x 180 BAAAAAZZ0H1S 450 16 1-1/8 x 190 BAAAAAZZ1B1U 450 16 1-1/8 x 160 BAAAAAZZ1B1N
250 12 7/8 x 200 BAAAAAZZ0J2A 500 20 1-1/8 x 200 BAAAAAZZ1B2A 500 20 1-1/8 x 170 BAAAAAZZ1B1Q
300 12 7/8 x 210 BAAAAAZZ0J2C 600 20 1-1/4 x 220 BAAAAAZZ1D2E 600 20 1-1/4 x 180 BAAAAAZZ1D1S
400 16 1 x 250 BAAAAAZZ1A2L
500 20 1-1/8 x 300 BAAAAAZZ1B3A
600 20 1-1/4 x 340 BAAAAAZZ1D3J
P_NOSBL
1C136DH
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C136DH
Revision Number : 0
Page : 2 / 7

Temperature (oC) 0 90
Pressure (barG)
DN 15 to 500 19.6 17.9
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500
S-20 S-20 S-20

Pipes & Tubes
P15 15 - 40 / - Pipe, ASME B36.10M, PE , ASTM A106-B, SMLS with PE Coating PPPABQPEACR1ABM
P20 50 - 500 / - Pipe, ASME B36.10M, BE , ASTM A106-B, SMLS with PE Coating PPPABQBEACR1ABM
Butterfly Valves
VY135 80 - 100 / - Bfly Vlv Lug Type, API 609 Cat A, CL 150, FF, Lever, ASTM A536 Grade 60-40-18, AISI VYLAA4DFFZCA1BP1GCFARZ
316, EPDM Trim, Elastomeric Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts, Short Pattern/ASME B16.5, UL/FM Approved
VY140 150 - 400 / - Bfly Vlv Lug Type, API 609 Cat A, CL 150, FF, Bevel Gear Operator, ASTM A536 Grade VYLAA4DFFZAA1BP1GCFARZ
60-40-18, AISI 316, EPDM Trim, Elastomeric Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts, Short Pattern/ASME B16.5, UL/FM Approved
Flanges
F207 15 - 500 / - WN Flg., ASME B16.5, CL 150, FF , ASTM A105 FWNABLDFFACGZZZZ
F215 15 - 500 / - Blind Flg., ASME B16.5, CL 150, FF , ASTM A105 FBLABLDFFACGZZZZ
BW Fittings
B306 100 - 450 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BE4LABMBEACK1ABT
B315 15 - 450 / 15 - 450 Equal Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless BTEEABMBEACKABAZ
B316 100 - 450 / - Equal Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BTEEABMBEACK1ABT
B321 300 - 450 / 250 - 400 Red. Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BTERABMBEACK1ABT
B326 100 - 450 / 40 - 400 Con. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BRECABMBEACK1ABT
B331 100 - 450 / 40 - 400 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BREEABMBEACK1ABT
B336 100 - 450 / - Cap, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BCAPABMBEACK1ABT
Forged Fittings
Gaskets
G605 15 - 40 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF, ASTM D1418, ASME B16.5, Ethylene GNMAB7DFFA1BA1AEC
Propylene Rubber(EPDM) Hardness 70+/-5 Shore A, Thickness at O-ring 4.0 mm
G610 50 - 80 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF, ASTM D1418, ASME B16.5, Ethylene GNMAB7DFFA1BA1AED
G615 100 - 100 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF, ASTM D1418, ASME B16.5, Ethylene GNMAB7DFFA1BA1AEE
G620 150 - 300 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF, ASTM D1418, ASME B16.5, Ethylene GNMAB7DFFA1BA1AEF
G625 350 - 500 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF, ASTM D1418, ASME B16.5, Ethylene GNMAB7DFFA1BA1AEG
Bolts & Nuts
Revision Number : 0
Page : 3 / 7

Legend and chart
Branch Table: 1C136DH_BR Legend:

400 E T E Red. Tee
350 E E T T Equal Tee
300 E E E T W Weldolet
250 E E E E T
200 W W E E B T
150 W W W E B B T
100 W W W W B B B T
80 W W W B B B B B T
50 W W W W B B B B B T
450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
01 Design limits acc. to ASME B16.5 flange rating mat. grp 1.1.
X10 The higher rating flanges, gaskets and bolting shall be used only at the class breaks and the connection with in-line instruments and equipment.
X11 Flat face flanges and gaskets shall be used at the connection with butterfly valves having UL/FM approval
X36 Valves supplied with lining extending over the flange facing shall be installed without gasket.
Revision Number : 0
Page : 4 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500
Pipes & Tubes

P5 PAATFPZPEEX 0F3Q 0H3Q 1A3Q 1F3Q
P10 PAATFPZBEEX 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E
P15 PAATFPZPERD 0F3Q 0H3Q 1A3Q 1F3Q
P20 PAATFPZBERD 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E
Butterfly Valves
VY135 LGBVAPEFFZCQZ KY3A KY4A
VY140 LGBVAPEFFZBQZ KY6A KY8A KY1K KY1M KY1P KY1R
Flanges
F207 FLALDCEFFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E
F215 FEALDCEFF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
BW Fittings
B305 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B306 NBAFKRBERM 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B310 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B311 NCAFKRBERM 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B315 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B316 NHAFKRBERM 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
B335 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B336 NAAFKRBERM 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E
Gaskets
G605 GCARDVEFFDQ 0F0C 0H0C 1A0C 1F0C
G610 GCARDVEFFDR 2A0E 3A0E
G615 GCARDVEFFDS 4A0F
G620 GCARDVEFFDT 6A0G 8A0G 1K0G 1M0G
G625 GCARDVEFFDU 1P0H 1R0H 1T0H 2K0H
Revision Number : 0
Page : 5 / 7
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Nippolet Reducing Tee Weldolet

40 x 15 NEAFKRBEAN1F3Q0F3Q NFAFKRBEAN1F3Q0F3Q NNAGDCPECG1F3Q0F3Q
50 x 15 NNAGDCPECG2A3K0F3Q
50 x 20 NEAFKRBEAN2A3K0H3Q NFAFKRBEAN2A3K0H3Q NNAGDCPECG2A3K0H3Q
80 x 15 NNAGDCPECG3A3K0F3Q
80 x 20 NNAGDCPECG3A3K0H3Q
80 x 25 NNAGDCPECG3A3K1A3Q
80 x 40 NEAFKRBEAN3A3K1F3Q NFAFKRBEAN3A3K1F3Q NNAGDCPECG3A3K1F3Q
80 x 50 NEAFKRBEAN3A3K2A3K NFAFKRBEAN3A3K2A3K
100 x 15 NNAGDCPECG4A3G0F3Q
100 x 20 NNAGDCPECG4A3G0H3Q
100 x 25 NNAGDCPECG4A3G1A3Q
100 x 40 NEAFKRBEAN4A3G1F3Q NFAFKRBEAN4A3G1F3Q NNAGDCPECG4A3G1F3Q
NEAFKRBERM4A3G1F3Q NFAFKRBERM4A3G1F3Q
NEAFKRBERM4A3G2A3K NFAFKRBERM4A3G2A3K
150 x 20 NNAGDCPECG6A3G0H3Q
150 x 25 NNAGDCPECG6A3G1A3Q
NEAFKRBERM6A3G4A3G NFAFKRBERM6A3G4A3G
200 x 15 NNAGDCPECG8A3F0F3Q
200 x 20 NNAGDCPECG8A3F0H3Q
200 x 25 NNAGDCPECG8A3F1A3Q
200 x 40 NNAGDCPECG8A3F1F3Q
NEAFKRBERM8A3F4A3G NFAFKRBERM8A3F4A3G
NEAFKRBERM8A3F6A3G NFAFKRBERM8A3F6A3G
250 x 15 NNAGDCPECG1K3F0F3Q
250 x 20 NNAGDCPECG1K3F0H3Q
250 x 25 NNAGDCPECG1K3F1A3Q
250 x 40 NNAGDCPECG1K3F1F3Q
NEAFKRBERM1K3F4A3G NFAFKRBERM1K3F4A3G
NEAFKRBERM1K3F6A3G NFAFKRBERM1K3F6A3G
250 x 200 NEAFKRBEAN1K3F8A3F NFAFKRBEAN1K3F8A3F
NEAFKRBERM1K3F8A3F NFAFKRBERM1K3F8A3F
300 x 15 NNAGDCPECG1M3F0F3Q
300 x 20 NNAGDCPECG1M3F0H3Q
300 x 25 NNAGDCPECG1M3F1A3Q
300 x 40 NNAGDCPECG1M3F1F3Q
NEAFKRBERM1M3F6A3G NFAFKRBERM1M3F6A3G
Revision Number : 0
Page : 6 / 7
Run x Branch Concentric Reducer Eccentric Reducer Nippolet Reducing Tee Weldolet

NEAFKRBERM1M3F8A3F NFAFKRBERM1M3F8A3F
NEAFKRBERM1M3F1K3F NFAFKRBERM1M3F1K3F NJAFKRBERM1M3F1K3F
350 x 15 NNAGDCPECG1P3E0F3Q
350 x 20 NNAGDCPECG1P3E0H3Q
350 x 25 NNAGDCPECG1P3E1A3Q
350 x 40 NNAGDCPECG1P3E1F3Q
NEAFKRBERM1P3E6A3G NFAFKRBERM1P3E6A3G
350 x 200 NEAFKRBEAN1P3E8A3F NFAFKRBEAN1P3E8A3F NJAFKRBEAN1P3E8A3F
NEAFKRBERM1P3E8A3F NFAFKRBERM1P3E8A3F
350 x 250 NEAFKRBEAN1P3E1K3F NFAFKRBEAN1P3E1K3F NJAFKRBEAN1P3E1K3F
NEAFKRBERM1P3E1K3F NFAFKRBERM1P3E1K3F NJAFKRBERM1P3E1K3F
NEAFKRBERM1P3E1M3F NFAFKRBERM1P3E1M3F NJAFKRBERM1P3E1M3F
400 x 15 NNAGDCPECG1R3E0F3Q
400 x 20 NNAGDCPECG1R3E0H3Q
400 x 25 NNAGDCPECG1R3E1A3Q
400 x 40 NNAGDCPECG1R3E1F3Q
400 x 200 NEAFKRBEAN1R3E8A3F NFAFKRBEAN1R3E8A3F NKAGDCBEZZ1R3E8A3F
NEAFKRBERM1R3E8A3F NFAFKRBERM1R3E8A3F
400 x 250 NEAFKRBEAN1R3E1K3F NFAFKRBEAN1R3E1K3F NJAFKRBEAN1R3E1K3F
NEAFKRBERM1R3E1K3F NFAFKRBERM1R3E1K3F NJAFKRBERM1R3E1K3F
NEAFKRBERM1R3E1M3F NFAFKRBERM1R3E1M3F NJAFKRBERM1R3E1M3F
NEAFKRBERM1R3E1P3E NFAFKRBERM1R3E1P3E NJAFKRBERM1R3E1P3E
450 x 15 NNAGDCPECG1T3E0F3Q
450 x 20 NNAGDCPECG1T3E0H3Q
450 x 25 NNAGDCPECG1T3E1A3Q
450 x 40 NNAGDCPECG1T3E1F3Q
450 x 50 NKAGDCBEZZ1T3E2A3K
450 x 80 NKAGDCBEZZ1T3E3A3K
450 x 100 NKAGDCBEZZ1T3E4A3G
450 x 150 NKAGDCBEZZ1T3E6A3G
450 x 200 NKAGDCBEZZ1T3E8A3F
450 x 250 NEAFKRBERM1T3E1K3F NFAFKRBERM1T3E1K3F NJAFKRBEAN1T3E1K3F
NJAFKRBERM1T3E1K3F
450 x 300 NEAFKRBERM1T3E1M3F NFAFKRBERM1T3E1M3F NJAFKRBEAN1T3E1M3F
NJAFKRBERM1T3E1M3F
450 x 350 NEAFKRBERM1T3E1P3E NFAFKRBERM1T3E1P3E NJAFKRBEAN1T3E1P3E
NJAFKRBERM1T3E1P3E
450 x 400 NEAFKRBERM1T3E1R3E NFAFKRBERM1T3E1R3E NJAFKRBEAN1T3E1R3E
NJAFKRBERM1T3E1R3E
Revision Number : 0
Page : 7 / 7
BLT API609 WAFER LUG BLT FOR STANDARD FLA

80 4 5/8 x 140 BAAAAAZZ0G1J 15 4 1/2 x 60 BAAAAAZZ0F0N

100 8 5/8 x 160 BAAAAAZZ0G1N 20 4 1/2 x 70 BAAAAAZZ0F0Q
150 8 3/4 x 170 BAAAAAZZ0H1Q 25 4 1/2 x 70 BAAAAAZZ0F0Q
200 8 3/4 x 180 BAAAAAZZ0H1S 40 4 1/2 x 80 BAAAAAZZ0F0S
250 12 7/8 x 200 BAAAAAZZ0J2A 50 4 5/8 x 90 BAAAAAZZ0G0U
300 12 7/8 x 210 BAAAAAZZ0J2C 65 4 5/8 x 90 BAAAAAZZ0G0U
350 12 1 x 240 BAAAAAZZ1A2J 80 4 5/8 x 100 BAAAAAZZ0G1A
400 16 1 x 250 BAAAAAZZ1A2L 100 8 5/8 x 100 BAAAAAZZ0G1A
125 8 3/4 x 100 BAAAAAZZ0H1A
150 8 3/4 x 110 BAAAAAZZ0H1C
200 8 3/4 x 110 BAAAAAZZ0H1C
250 12 7/8 x 120 BAAAAAZZ0J1E
300 12 7/8 x 120 BAAAAAZZ0J1E
450 16 1-1/8 x 150 BAAAAAZZ1B1L
500 20 1-1/8 x 160 BAAAAAZZ1B1N
P_NOSBL
1C139DF
Revision: 0
Issue Date : May 31, 2022
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 9

Temperature (oC) 0 50 75 100 150 175 200 250 295 300 350 400
Pressure (barG)
DN 15 to 600 19.6 19.2 17.7 15.8 13.8 12.1 10.2 8.4 6.5
DN 750 to 1200 9.0 15.8 13.0 9.0 6.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500 600 750 900 1050 1200
S-20 S-20 S-20 S-20 S-STD S-XS 11.13 mm S-XS

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE, ASTM A106-B, Seamless PPPABQPEACRAAGZ
P15 750 - 1200 / - Pipe, ASME B36.10M, BE, ASTM A672-C65 CL22, Submerged Arc Welding (SAW) PPPABQBEA1BHCANZ
Butterfly Valves
VY105 750 - 1200 / - Bfly Vlv Off Triple, API 609 Cat B, CL 150, RF, Bolted Cover Bonnet, Bevel Gear Operator, VYSAA2DRF2AACD2CK1ACV
ASTM A216-WCB, CS, Duplex, Stellite Trim, Graphite Seals, ASTM A193 Grade B7
Bolts/Studs, ASTM A194 Grade 2H Nuts, Steam, Steam, Offset, Triple
Check Valves
VC130 750 - 1200 / - Dual Plate Check , API 594 , CL 150, RF , ASTM A216-WCB , AISI 316, Stellite 6 Trim, VCWFAA2DRFZACDCCF1ADNZ
Steam , ASME B16.47 Sr. A
VC147 15 - 40 / - Piston Chk Vlv RB, API 602, CL 150, RF, Welded Bonnet, ASTM A105 Normalised, AISI VC1BAA5DRFCA1BUCCF1ABK
316, Stellite 6 Trim, Steam, API STD 602
VC150 50 - 600 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A216-WCB , AISI 316, VCSCBWDDRFAACD2DAZZZZ
Nuts, Steam
Gate Valves
VG165 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A105 Normalised, VG3AA5DRFAFA1BUBDAZZZZ
Grade 2H Nuts, Steam
VG167 50 - 300 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, AISI 316, VGRAA4DRFAFACDBDAZZZZ
Nuts, Steam
VG185 350 - 600 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A216-WCB, VGRAA4DRFAAACDBDAZZZZ
VG190 15 - 15 / - Gate Vlv RB, API 602, CL 800, SWE, Bltd Bonnet, Handwheel , ASTM A105 Normalised, VG3AA5MSWAFA1BUBDAZZZZZ
Globe Valves
VL200 15 - 40 / - Globe Vlv BL Seal RB, API 602, CL 600, BE, Welded Bonnet, Y Pattern, Handwheel, VL2AA5LBE9FA1BUBDAZZZZ
ASTM A105 Normalised, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7
Bolts/Studs, ASTM A194 Grade 2H Nuts, Steam
VL210 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, AISI VLRBWEDRFAFACDBDAZZZZ
2H Nuts, Steam
VL215 200 - 400 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A216- VLRBWEDRFAAACDBDAZZZZ
A194 Grade 2H Nuts, Steam
VL220 25 - 25 / - Globe Vlv BL Seal RB, API 602, CL 150, RF, Welded Bonnet, Y Pattern, Handwheel , VL2AA5DRF9FA1BUBDAZZZZZ
ASTM A105 Normalised, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7
Bolts/Studs, ASTM A194 Grade 2H Nuts, Steam
Flanges
F310 750 - 1200 / - Blind Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105 FBLABHDRFACGZZZZ
F330 750 - 1200 / - WN Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105 FWNABHDRFACGZZZZ
F340 750 - 900 / - WN Flg., ASME B16.47 Sr A, CL 300, RFFE , ASTM A105 FWNABHIRFACGZZZZ
BW Fittings
B410 750 - 1200 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPBW, Welded BE4LABMBEA1AW1AAO
B435 750 - 1200 / 600 - 1050 Con. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded BRECABMBEA1AW1AAO
Revision Number : 0
Page : 3 / 9

BW Fittings
B445 750 - 1200 / 600 - 1050 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded BREEABMBEA1AW1AAO
B455 750 - 1200 / - Equal Tee, ASME B16.9, BE , ASTM A234-WPBW, Welded BTEEABMBEA1AW1AAO
B465 750 - 1200 / 400 - 1050 Red. Tee, ASME B16.9, BE , ASTM A234-WPBW, Welded BTERABMBEA1AW1AAO
Forged Fittings
O504 150 - 450 / 40 - 50 Flatolet, MSS SP-97, CL 150, BE , ASTM A105- OFTLAM9DBEACGZZZZ
Gaskets
G615 750 - 900 / - Gasket camprofile, BS EN 12560 Part 6, CL 300, RF, AISI 316, ASME B16.47 Series A, G1AB1ACIRFA1AX1AAH
Bolts & Nuts
D720 750 - 1200 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.47 Sr. A DBPABMDRTAF11ADH
D750 750 - 1200 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 60, B16.47 Sr. A DBSABMDRTAEY1ADH
Revision Number : 0
Page : 4 / 9

Legend and chart

1050 E T E Red. Tee
600 E E E E T
W Weldolet
500 W W E E E T
450 W W E E E P T
400 W W W E E P E T
350 W W W W E P E P T
300 W W W W E P E P P T
250 W W W W W P E P P P T
200 W W W W W P W P P P P T
150 W W W W W P P P P P P P T
100 W W W W W P P P P P P P P T
80 W W W W W P P P P P P P P P T
50 W W W W W P W P P P P P P P P T
40 A A A A A A A A A A A A A A A E T
25 A A A A A A A A A A A A A A A E E T
20 A A A A A A A A A A A A A A A A E E T
15 A A A A A A A A A A A A A A A A A E E T
1200 1050 900 750 600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
29 For economic reasons globe valves (y-type) replace gate valves (wedge type) for sizes DN 15-40.
165 Piping class range DN 15 up to/including DN 600, design is based on the full rating of the flange material. Piping components for sizes DN 650 and up are
limited by the service design conditions. These components should be investigated for their suitability in piping systems where the design conditions exceed
the limits.
172 Piping design meets full vacuum at 295 deg C.
X17 Use flat olet for drain connections on caps, such as at drip legs.
X27 Branch chart for drip legs to be referred to TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Attachment-1 Specification for Piping Construction Standard.
X45 Gate valve VG190 DN 15 SWE type shall only be used for isolation to condensate pot.
X46 Globe valve VL220 DN 25 RF type shall only be used for custody metering skid.
Revision Number : 0
Page : 5 / 9
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Pipes & Tubes

P10 PAATFPZBEEX 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
P15 PAATEMZBEFW 3K3R 3R3S 4M2G 4T3S
Butterfly Valves
VY105 LJBUBKERFADBNP JU3K JU3R JU4M JU4T
Check Valves
VC130 LRBDBKERFZGE GW3K GW3R GW4M GW4T
VC147 LKBECBERFAKGE GB0F GB0H GB1A GB1F
VC150 LNBBBKERFAJFH ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Gate Valves
VG165 VJBJCBERFAJEFH ZZ0F ZZ0H ZZ1A ZZ1F
VG167 VQBHBKERFAJEFH ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
VG185 VQBHBKERFAJBFH ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VG190 VJBJCBHSWAJEFH ZZ0F
Globe Valves
VL200 VSBQATGBEAHEFHZZ 0F3K 0H3K 1A3K 1F3K
VL210 VUBNBKERFAJEFH ZZ2A ZZ3A ZZ4A ZZ6A
VL215 VUBNBKERFAJBFH ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R
VL220 VSBQCBERFAHEFH ZZ1A
Flanges
F310 FEAKGUERF ZZ3K ZZ3R ZZ4M ZZ4T
F325 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
F330 FLAKDCERFZZ 3K3R 3R3S 4M2G 4T3S
F335 FLALDCFRFZZ 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
F340 FLAKDCFRFZZ 3K3R 3R3S
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
B410 NBAFHRBEAC 3K3R 3R3S 4M2G 4T3S
B415 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
B420 NCAFHRBEAC 3K3R 3R3S 4M2G 4T3S
B425 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E 3K3R 3R3S 4M2G 4T3S
B450 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E 1P3E 1R3E 1T3E 2K3E 2P3E
B455 NHAFHRBEAC 3K3R 3R3S 4M2G 4T3S
Gaskets
G605 GAANDUERFDG 3K0C 3R0C 4M0C 4T0C
G615 GAANDUFRFDG 3K0C 3R0C
G620 GEASDUFRFDJ 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
D705 FAAMGVERT AR1M AR1P AR1R AR1T AR2K AR2P
D720 FAAMGXERT AT3K AT3R AT4M AT4T
D735 FBAMGVERT AR1M AR1P AR1R AR1T AR2K AR2P
D750 FBAMGVERT AT3K AT3R AT4M AT4T
Revision Number : 0
Page : 6 / 9
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Flatolet Nippolet Reducing Tee Weldolet

150 x 40 NMAGDCERFZZ6A1F3K HBAGDCEBEZZ6A1F3K NNAGDCPECF6A3G1F3K
150 x 50 HBAGDCEBEZZ6A2A3G
200 x 40 NMAGDCERFZZ8A1F3K HBAGDCEBEZZ8A1F3K NNAGDCPECF8A3E1F3K
200 x 50 HBAGDCEBEZZ8A2A3G
250 x 40 NMAGDCERFZZ1K1F3K HBAGDCEBEZZ1K1F3K NNAGDCPECF1K3E1F3K
250 x 50 HBAGDCEBEZZ1K2A3G
300 x 40 NMAGDCERFZZ1M1F3K HBAGDCEBEZZ1M1F3K NNAGDCPECF1M3E1F3K
300 x 50 HBAGDCEBEZZ1M2A3G
300 x 150 NEAFKRBEAN1M3E6A3G NFAFKRBEAN1M3E6A3G NJAFKRBEAN1M3E6A3G
300 x 200 NEAFKRBEAN1M3E8A3E NFAFKRBEAN1M3E8A3E NJAFKRBEAN1M3E8A3E
350 x 40 NMAGDCERFZZ1P1F3K HBAGDCEBEZZ1P1F3K NNAGDCPECF1P3E1F3K
350 x 50 HBAGDCEBEZZ1P2A3G
350 x 150 NEAFKRBEAN1P3E6A3G NFAFKRBEAN1P3E6A3G
350 x 200 NEAFKRBEAN1P3E8A3E NFAFKRBEAN1P3E8A3E NJAFKRBEAN1P3E8A3E
Revision Number : 0
Page : 7 / 9
350 x 300 NEAFKRBEAN1P3E1M3E NFAFKRBEAN1P3E1M3E NJAFKRBEAN1P3E1M3E

400 x 20 NMAGDCERFZZ1R0H3K NNAGDCPECF1R3E0H3K
400 x 25 NMAGDCERFZZ1R1A3K NNAGDCPECF1R3E1A3K
400 x 40 NMAGDCERFZZ1R1F3K HBAGDCEBEZZ1R1F3K NNAGDCPECF1R3E1F3K
400 x 50 HBAGDCEBEZZ1R2A3G
400 x 200 NEAFKRBEAN1R3E8A3E NFAFKRBEAN1R3E8A3E
400 x 250 NEAFKRBEAN1R3E1K3E NFAFKRBEAN1R3E1K3E NJAFKRBEAN1R3E1K3E
400 x 300 NEAFKRBEAN1R3E1M3E NFAFKRBEAN1R3E1M3E NJAFKRBEAN1R3E1M3E
450 x 15 NMAGDCERFZZ1T0F3K NNAGDCPECF1T3E0F3K
450 x 20 NMAGDCERFZZ1T0H3K NNAGDCPECF1T3E0H3K
450 x 25 NMAGDCERFZZ1T1A3K NNAGDCPECF1T3E1A3K
450 x 40 NMAGDCERFZZ1T1F3K HBAGDCEBEZZ1T1F3K NNAGDCPECF1T3E1F3K
450 x 50 HBAGDCEBEZZ1T2A3G NKAGDCBEZZ1T3E2A3G
450 x 200 NKAGDCBEZZ1T3E8A3E
450 x 250 NEAFKRBEAN1T3E1K3E NFAFKRBEAN1T3E1K3E NJAFKRBEAN1T3E1K3E
450 x 300 NEAFKRBEAN1T3E1M3E NFAFKRBEAN1T3E1M3E NJAFKRBEAN1T3E1M3E
450 x 350 NEAFKRBEAN1T3E1P3E NFAFKRBEAN1T3E1P3E NJAFKRBEAN1T3E1P3E
450 x 400 NEAFKRBEAN1T3E1R3E NFAFKRBEAN1T3E1R3E NJAFKRBEAN1T3E1R3E
500 x 300 NEAFKRBEAN2K3E1M3E NFAFKRBEAN2K3E1M3E NJAFKRBEAN2K3E1M3E
500 x 450 NEAFKRBEAN2K3E1T3E NFAFKRBEAN2K3E1T3E NJAFKRBEAN2K3E1T3E
600 x 200 NKAGDCBEZZ2P3E8A3E
600 x 250 NKAGDCBEZZ2P3E1K3E
600 x 300 NJAFKRBEAN2P3E1M3E
600 x 350 NJAFKRBEAN2P3E1P3E
600 x 400 NEAFKRBEAN2P3E1R3E NFAFKRBEAN2P3E1R3E NJAFKRBEAN2P3E1R3E
600 x 450 NEAFKRBEAN2P3E1T3E NFAFKRBEAN2P3E1T3E NJAFKRBEAN2P3E1T3E
750 x 15 NMAGDCERFZZ3K0F3K NNAGDCPECF3K3R0F3K
750 x 20 NMAGDCERFZZ3K0H3K NNAGDCPECF3K3R0H3K
750 x 25 NMAGDCERFZZ3K1A3K NNAGDCPECF3K3R1A3K
750 x 40 NMAGDCERFZZ3K1F3K NNAGDCPECF3K3R1F3K
750 x 50 NKAGDCBEZZ3K3R2A3G
750 x 200 NKAGDCBEZZ3K3R8A3E
750 x 250 NKAGDCBEZZ3K3R1K3E
750 x 300 NKAGDCBEZZ3K3R1M3E
750 x 350 NKAGDCBEZZ3K3R1P3E
750 x 400 NJAFHRBEAC3K3R1R3E
750 x 450 NJAFHRBEAC3K3R1T3E
750 x 500 NJAFHRBEAC3K3R2K3E
750 x 600 NEAFHRBEAC3K3R2P3E NFAFHRBEAC3K3R2P3E NJAFHRBEAC3K3R2P3E
Revision Number : 0
Page : 8 / 9
900 x 15 NMAGDCERFZZ3R0F3K NNAGDCPECF3R3S0F3K

900 x 20 NMAGDCERFZZ3R0H3K NNAGDCPECF3R3S0H3K
900 x 25 NMAGDCERFZZ3R1A3K NNAGDCPECF3R3S1A3K
900 x 40 NMAGDCERFZZ3R1F3K NNAGDCPECF3R3S1F3K
900 x 50 NKAGDCBEZZ3R3S2A3G
900 x 200 NKAGDCBEZZ3R3S8A3E
900 x 250 NKAGDCBEZZ3R3S1K3E
900 x 300 NKAGDCBEZZ3R3S1M3E
900 x 350 NKAGDCBEZZ3R3S1P3E
900 x 400 NKAGDCBEZZ3R3S1R3E
900 x 450 NJAFHRBEAC3R3S1T3E
900 x 500 NJAFHRBEAC3R3S2K3E
900 x 600 NJAFHRBEAC3R3S2P3E
900 x 750 NEAFHRBEAC3R3S3K3R NFAFHRBEAC3R3S3K3R NJAFHRBEAC3R3S3K3R
1050 x 15 NMAGDCERFZZ4M0F3K NNAGDCPECF4M2G0F3K
1050 x 20 NMAGDCERFZZ4M0H3K NNAGDCPECF4M2G0H3K
1050 x 25 NMAGDCERFZZ4M1A3K NNAGDCPECF4M2G1A3K
1050 x 40 NMAGDCERFZZ4M1F3K NNAGDCPECF4M2G1F3K
1050 x 50 NKAGDCBEZZ4M2G2A3G
1050 x 200 NKAGDCBEZZ4M2G8A3E
1050 x 250 NKAGDCBEZZ4M2G1K3E
1050 x 300 NKAGDCBEZZ4M2G1M3E
1050 x 350 NKAGDCBEZZ4M2G1P3E
1050 x 400 NKAGDCBEZZ4M2G1R3E
1050 x 450 NKAGDCBEZZ4M2G1T3E
1050 x 500 NKAGDCBEZZ4M2G2K3E
1050 x 600 NJAFHRBEAC4M2G2P3E
1050 x 750 NJAFHRBEAC4M2G3K3R
1050 x 900 NEAFHRBEAC4M2G3R3S NFAFHRBEAC4M2G3R3S NJAFHRBEAC4M2G3R3S
1200 x 15 NMAGDCERFZZ4T0F3K NNAGDCPECF4T3S0F3K
1200 x 20 NMAGDCERFZZ4T0H3K NNAGDCPECF4T3S0H3K
1200 x 25 NMAGDCERFZZ4T1A3K NNAGDCPECF4T3S1A3K
1200 x 40 NMAGDCERFZZ4T1F3K NNAGDCPECF4T3S1F3K
1200 x 50 NKAGDCBEZZ4T3S2A3G
1200 x 200 NKAGDCBEZZ4T3S8A3E
1200 x 250 NKAGDCBEZZ4T3S1K3E
1200 x 300 NKAGDCBEZZ4T3S1M3E
1200 x 350 NKAGDCBEZZ4T3S1P3E
1200 x 400 NKAGDCBEZZ4T3S1R3E
1200 x 450 NKAGDCBEZZ4T3S1T3E
1200 x 500 NKAGDCBEZZ4T3S2K3E
1200 x 600 NJAFHRBEAC4T3S2P3E
1200 x 750 NJAFHRBEAC4T3S3K3R
1200 x 900 NJAFHRBEAC4T3S3R3S
1200 x 1050 NEAFHRBEAC4T3S4M2G NFAFHRBEAC4T3S4M2G NJAFHRBEAC4T3S4M2G
Revision Number : 0
Page : 9 / 9


40 4 1/2 x 90 BAAAAAZZ0F0U 40 4 1/2 x 80 BAAAAAZZ0F0S
50 4 5/8 x 100 BAAAAAZZ0G1A 50 4 5/8 x 90 BAAAAAZZ0G0U
200 8 3/4 x 130 BAAAAAZZ0H1G 200 8 3/4 x 120 BAAAAAZZ0H1E
400 16 1 x 170 BAAAAAZZ1A1Q 400 16 1 x 150 BAAAAAZZ1A1L
450 16 1-1/8 x 190 BAAAAAZZ1B1U 500 20 1-1/8 x 170 BAAAAAZZ1B1Q
500 20 1-1/8 x 200 BAAAAAZZ1B2A 600 20 1-1/4 x 180 BAAAAAZZ1D1S
600 20 1-1/4 x 220 BAAAAAZZ1D2E 750 28 1-1/4 x 250 BAAAAAZZ1D2L
750 28 1-1/4 x 290 BAAAAAZZ1D2U 900 32 1-1/2 x 290 BAAAAAZZ1F2U
900 32 1-1/2 x 350 BAAAAAZZ1F3L 1050 36 1-1/2 x 310 BAAAAAZZ1F3C
1050 36 1-1/2 x 370 BAAAAAZZ1F3Q 1200 44 1-1/2 x 330 BAAAAAZZ1F3G
P_NOSBL
1G100DF
Carbon Steel Galvanized, Class 150
Revision: 0
Issue Date : May 23, 2022
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1G100DF
Revision Number : 0
Page : 2 / 7
CORROSION ALLOWANCE : 0.0mm

TYPE OF MATERIAL : Carbon steel, galvanized
Temperature (oC) 0 50 90
Pressure (barG)
DN 15 to 300 16.0 16.0 16.0
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300

Pipes & Tubes
P5 15 - 50 / - Pipe, ASME B36.10M, NPT, API 5L Grade B, Galvanized, Seamless PPPABQ1AAEEAALZ
P10 80 - 300 / - Pipe, ASME B36.10M, BE, API 5L Grade B, Seamless PPPABQBEAEEAAGZ
Ball Valves
VB105 20 - 20 / - Ball Vlv SP RB, ISO 17292, CL 150, FF, Floating Ball, Integral (Non-Extended) Bonnet, VBUEAADFF8CA1BP2ASZZZZ
Lever, ASTM B148 UNS C95400, Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Water
VB110 15 - 50 / - Ball Vlv SP RB, ISO 17292, CL 800, FTE, Floating Ball, Integral (Non-Extended) Bonnet, VBUEAAMTF8CA1BP2ASZZZZ
Lever, ASTM B148 UNS C95400, Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic
VB115 50 - 50 / - Ball Vlv SP FB, ISO 17292, CL 150, FF, Floating Ball, Integral (Non-Extended) Bonnet, VBTEAADFF8CAFG2ASZZZZZ
Lever , ASTM B148 Grade C (UNS C95400), Aluminium Bronze, PTFE Trim,
Graphite/Thermoplastic Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts, Water
VB120 80 - 150 / - Ball Vlv SP FB, ISO 17292, CL 150, FF, Floating Ball, Integral (Non-Extended) Bonnet, VBTEAADFF8CAFG2ASZZZZZ
Nuts, Water
Butterfly Valves
VY125 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF-, Wrench, ASTM A395 Grade 60-40-18, VYLAA4EFFEA1BSBBBZZZZZ
Aluminium Bronze, PTFE Trim, Elastomeric Seals, ASTM A193 Grade B8M-Class 1
Bolts/Studs, ASTM A194 Grade 8M Nuts-
VY130 200 - 300 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF-, Bevel Gear Operator, ASTM A395 Grade VYLAA4EFFAA1BSBBBZZZZZ
60-40-18, Aluminium Bronze, PTFE Trim, Elastomeric Seals, ASTM A193 Grade B8M-
Class 1 Bolts/Studs, ASTM A194 Grade 8M Nuts-
Check Valves
VC135 80 - 300 / - Lug Check Dual Pl, API 594, CL 150, FF, ASTM B148 UNS C95400, Aluminium Bronze VCWEAA2DFFZA1BP2AOAAMZ
Trim, Water, ASME B16.5
VC140 15 - 50 / - Piston Chk Vlv RB, BS 5154 Series A, PN 25, FTE, Screwed Union Bonnet, ASTM B148 VC1BB1AMFTF6A1BP2DBZZZZ
UNS C95400, Aluminium Bronze Trim, Thermoplastic Seals, Water
Globe Valves
VL145 40 - 40 / - Globe Valve RB, BS 5154 Series A, PN 16, FTE, Bltd Bonnet, n-ext, Handwheel , ASTM VL3BABACTF8FAFGBCCZZZZ
B148 Grade C (UNS C95400), Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic
VL150 50 - 50 / - Globe Vlv FB, BS 5154 Series A, PN 16, FTE, Bltd Bonnet, n-ext, Handwheel , ASTM B148 VLRBABACTF8FAFGBCCZZZZ
Grade C (UNS C95400), Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Water
VL155 80 - 80 / - Globe Vlv FB, BS 5154 Series A, PN 16, FF, Bltd Bonnet, n-ext, Handwheel , ASTM B148 VLRBABACFF8FAFGBCCZZZZ
Grade C (UNS C95400), Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Water
Flanges
F305 15 - 300 / - Blind Flg., ASME B16.5, CL 150, FF , ASTM A105, Galvanized FBLABLDFFACGAADZ
F320 15 - 50 / - FTHD, ASME B16.5, CL150, FFFE , ASTM A105, Galvanized FTHABLDFFACGAADZ
F330 40 - 50 / - Thd. Flg., ASME B16.5, CL 300, FF, ASTM A105, Galvanized FTHABLIFFACGAADZ
F335 80 - 300 / - WN Flg., ASME B16.5, CL 300, FF , ASTM A105 FWNABLIFFACGZZZZ
BW Fittings
Forged Fittings
O500 15 - 50 / - 45 Deg. Elbow, ASME B16.11, CL 3000, FTE , ASTM A105, Galvanized OE45AB2STFACGAADZ
O505 15 - 50 / - CAP, ASME B16.11, CL 3000, FTE , ASTM A105, Galvanized OCAPAB2STFACGAADZ
O507 15 - 50 / - Cplg., ASME B16.11, CL 3000, FTE , ASTM A105, Galvanized OCPLAB2STFACGAADZ
O510 15 - 50 / - Equal Tee, ASME B16.11, CL 3000, FTE , ASTM A105, Galvanized OETEAB2STFACGAADZ
Revision Number : 0
Page : 3 / 7

Forged Fittings
O514 20 - 50 / 15 - 40 Flush Bushing, ASME B16.11, MTE x FTE , ASTM A234 Grade WPB, Galvanized OBSFAB21BACKAADZ
O518 15 - 50 / - Nipple, ASME B36.10M, MTE , API 5L Grade B, 75mm, Galvanized ONIPABQTQAEE1AAG
O520 15 - 50 / - Nipple, ASME B36.10M, MTE , API 5L Grade B, 100mm, Galvanized ONIPABQTQAEE1AAE
O522 80 - 300 / 15 - 50 Nippolet, MSS SP-97, BE x MTE , ASTM A105, CL 3000 O1ABAM9MBACG1AAU
O524 15 - 50 / - Plug Hex Head, ASME B16.11, MTE , ASTM A105, Galvanized OPLHAB2TMACGAADZ
O526 20 - 50 / 15 - 40 Reducer Concentric, ASME B16.11, FTE , ASTM A105, CL 3000, Galvanized ORECAB2TFACG1AEV
O528 20 - 50 / 15 - 40 Red. Tee, ASME B16.11, CL 3000, FTE , ASTM A105, Galvanized ORTEAB2STFACGAADZ
O530 15 - 50 / - Union, BS 3799, CL 3000, FTE , ASTM A105, Galvanized OUNOBAASTFACGAADZ
O535 80 - 100 / 40 - 50 Con. Swage, MSS SP-95, BLE / TSE , ASTM A234-WPB OSGCAM8BTACKZZZZ
O540 80 - 100 / 40 - 50 Ecc. Swage, MSS SP-95, BLE / TSE , ASTM A234-WPB OSGEAM8BTACKZZZZ
Gaskets
G605 15 - 300 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF , PTFE reinforced with mineral filler, GNMAB7DFFABRGLWZ
ASME B16.5, WT 3.0 mm
G610 40 - 300 / - Non Metal Flat Gskt, ASME B16.21, CL 300, FF , PTFE reinforced with mineral filler, GNMAB7IFFABRGLWZ
Bolts & Nuts
D715 50 - 250 / - Spectacle Blind, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 70, ASME B16.5, DF8ABMDFTAF1BDEZ
Galvanized
D725 300 - 300 / - Spacer ring, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 70, ASME B16.5, DBSABMDFTAF1BDEZ
Galvanized
D740 300 - 300 / - Spade, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 70, ASME B16.5, Galvanized DBPABMDFTAF1BDEZ
Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1G100DF_BR Legend:

250 E T E Red. Tee
200 P E T P Pipe To Pipe
150 P P P T T Equal Tee
100 P P P P T
80 P P P P P T
50 A A A A A A T
40 A A A A A A E T
20 A A A A A A E E E T
15 A A A A A A E E E E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
45 Design limits acc. to BS5154 valve rating.
46 Pre-fab carbon steel pipe spools shall be galvanised in accordance with ASTM A53.
47 Pre-fab carbon steel pipe spools shall have flanged ends and shall be limited to L- or Z-shapes.
180 Piping Class Design meets full vacuum at 75 deg C.
X03 DN 15-50: Galvanized NPT.
DN 80 up: Flanged prefabricated spools galvanized as per ASTM A53.
X08 Full port valves shall be used if indicated on the P&ID.
X25 The selection of a ball valve will de-rate this pipe class in accordance with ISO 17292.
X29 Selection of ball valve for metering skid for size DN 20 and DN 50 shall be flat face flanged end as default and followed by female threaded end as
secondary option.
X30 Ball valve VB105 DN 20 and VB115 DN 50 FF type shall only be used for custody metering skid.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P5 PAATFRZNPFE 0F3K 0H3K 1A3K 1F3K 2A3K
P10 PAATFRZBEEX 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Ball Valves
VB105 VGAVBYEFFAZCAE ZZ0H
VB110 VGAVBYHTFAZCAE ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VB115 VWAVCCEFFAZCAE ZZ2A
VB120 VWAVCCEFFAZCAE ZZ3A ZZ4A ZZ6A
Butterfly Valves
VY125 LGBVARBFFZDRA ZZ3A ZZ4A ZZ6A
VY130 LGBVARBFFZBRA ZZ8A ZZ1K ZZ1M
Check Valves
VC135 LQBDBYEFFZER HC3A HC4A HC6A HC8A HC1K HC1M
VC140 LKAZBYCTFAFDW ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Globe Valves
VL145 VTAZCCBTFAGEJK ZZ1F
VL150 VUAZCCBTFAGEJK ZZ2A
VL155 VUAZCCBFFAGEJK ZZ3A
Flanges
F305 FEALDCEFF CC0F CC0H CC1A CC1F CC2A CC3A CC4A CC6A CC8A CC1K CC1M
F320 FKALDCEFF CC0F CC0H CC1A CC1F CC2A
F325 FLALDCEFFZZ 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
F330 FKALDCFFF CC1F CC2A
F335 FLALDCFFFZZ 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
BW Fittings
B405 NBAFKRBEAN 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B410 NCAFKRBEAN 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B415 NAAFKRBEAN 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B430 NHAFKRBEAN 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Forged Fittings
O500 NSACDCMTF CY0F CY0H CY1A CY1F CY2A
O502 NTACDCMTF CY0F CY0H CY1A CY1F CY2A
O505 NAACDCMTF CY0F CY0H CY1A CY1F CY2A
O507 NRACDCMTF CY0F CY0H CY1A CY1F CY2A
O510 NHACDCMTF CY0F CY0H CY1A CY1F CY2A
O518 NUATFRTMEQ 0F3K 0H3K 1A3K 1F3K 2A3K
O520 NUATFRTMEN 0F3K 0H3K 1A3K 1F3K 2A3K
O524 NVACDCTM CY0F CY0H CY1A CY1F CY2A
O530 NYABDCMTF CY0F CY0H CY1A CY1F CY2A
Gaskets
G605 GCAREEEFFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L 8A0L 1K0L 1M0L
G610 GCAREEFFFNU 1F0L 2A0L 3A0L 4A0L 6A0L 8A0L 1K0L 1M0L
D715 FCAMGXEFT BB2A BB3A BB4A BB6A BB8A BB1K
D725 FBAMGXEFT BB1M
D740 FAAMGXEFT BB1M
Revision Number : 0
Page : 6 / 7
Reducing Component
Run x Branch Concentric Reducer Concentric Swage Eccentric Reducer Eccentric Swage Flangeolet Flush Bushing Nippolet Reducing Tee
20 x 15 NQACDDMFCY0H0F NJACDCMTFCY0H0F
25 x 15 NQACDDMFCY1A0F NJACDCMTFCY1A0F
25 x 20 NQACDDMFCY1A0H NJACDCMTFCY1A0H
40 x 15 NQACDDMFCY1F0F NJACDCMTFCY1F0F
40 x 20 NQACDDMFCY1F0H NJACDCMTFCY1F0H
40 x 25 NQACDDMFCY1F1A NJACDCMTFCY1F1A
50 x 20 NQACDDMFCY2A0H NJACDCMTFCY2A0H
50 x 25 NQACDDMFCY2A1A NJACDCMTFCY2A1A
80 x 15 NMAGDCERFZZ3A0F3K NNAGDCMBCF3A3G0F3K
80 x 20 NMAGDCERFZZ3A0H3K NNAGDCMBCF3A3G0H3K
80 x 25 NMAGDCERFZZ3A1A3K NNAGDCMBCF3A3G1A3K
80 x 40 NEAFKRBEAN3A3G1F3K MAAKKRTNZZ3A3G1F3K NFAFKRBEAN3A3G1F3K MBAKKRTNZZ3A3G1F3K NMAGDCERFZZ3A1F3K NNAGDCMBCF3A3G1F3K
80 x 50 NEAFKRBEAN3A3G2A3K MAAKKRTNZZ3A3G2A3K NFAFKRBEAN3A3G2A3K MBAKKRTNZZ3A3G2A3K NMAGDCERFZZ3A2A3K NNAGDCMBCF3A3G2A3K
100 x 40 NEAFKRBEAN4A3G1F3K MAAKKRTNZZ4A3G1F3K NFAFKRBEAN4A3G1F3K MBAKKRTNZZ4A3G1F3K NMAGDCERFZZ4A1F3K NNAGDCMBCF4A3G1F3K
100 x 50 NEAFKRBEAN4A3G2A3K MAAKKRTNZZ4A3G2A3K NFAFKRBEAN4A3G2A3K MBAKKRTNZZ4A3G2A3K NMAGDCERFZZ4A2A3K NNAGDCMBCF4A3G2A3K
200 x 15 NMAGDCERFZZ8A0F3K NNAGDCMBCF8A3E0F3K
200 x 20 NMAGDCERFZZ8A0H3K NNAGDCMBCF8A3E0H3K
200 x 25 NMAGDCERFZZ8A1A3K NNAGDCMBCF8A3E1A3K
200 x 40 NMAGDCERFZZ8A1F3K NNAGDCMBCF8A3E1F3K
200 x 50 NMAGDCERFZZ8A2A3K NNAGDCMBCF8A3E2A3K
250 x 15 NMAGDCERFZZ1K0F3K NNAGDCMBCF1K3E0F3K
250 x 20 NMAGDCERFZZ1K0H3K NNAGDCMBCF1K3E0H3K
250 x 25 NMAGDCERFZZ1K1A3K NNAGDCMBCF1K3E1A3K
250 x 40 NMAGDCERFZZ1K1F3K NNAGDCMBCF1K3E1F3K
250 x 50 NMAGDCERFZZ1K2A3K NNAGDCMBCF1K3E2A3K
300 x 15 NMAGDCERFZZ1M0F3K NNAGDCMBCF1M3E0F3K
300 x 20 NMAGDCERFZZ1M0H3K NNAGDCMBCF1M3E0H3K
300 x 25 NMAGDCERFZZ1M1A3K NNAGDCMBCF1M3E1A3K
300 x 40 NMAGDCERFZZ1M1F3K NNAGDCMBCF1M3E1F3K
300 x 50 NMAGDCERFZZ1M2A3K NNAGDCMBCF1M3E2A3K
Revision Number : 0
Page : 7 / 7
BLT FOR STD FLG

100 8 5/8 x 100 BAAAAAZZ0G1A
150 8 3/4 x 110 BAAAAAZZ0H1C
200 8 3/4 x 110 BAAAAAZZ0H1C
250 12 7/8 x 120 BAAAAAZZ0J1E
BLT FOR WAFER LUG

80 4 5/8 x 140 BAAAAAZZ0G1J

100 8 5/8 x 160 BAAAAAZZ0G1N
150 8 3/4 x 170 BAAAAAZZ0H1Q
250 12 7/8 x 200 BAAAAAZZ0J2A
P_NOSBL
1G304
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1G304
Revision Number : 0
Page : 2 / 7
CORROSION ALLOWANCE : 0.0 mm, ≤ DN 50

CORROSION ALLOWANCE : 1.0 mm, > DN 50
TYPE OF MATERIAL : Carbon steel, galvanized, ≤ DN 50
TYPE OF MATERIAL : Carbon steel, > DN 50
Pressure (barG)
DN 15 to 300 16.0 16.0 16.0
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300

Pipes & Tubes
P5 15 - 300 / - Pipe, ASME B36.10M, BE , API 5L Grade B, Seamless PPPABQBEAEEAAGZ
Ball Valves
VB105 15 - 50 / - Ball Vlv SP RB, ISO 17292, CL 150, FF, Floating Ball, Integral (Non-Extended) Bonnet, VBUEAADFF8CA1BRBBDZZZZZ
Lever , ASTM B148 UNS C95800, Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts-
VB110 80 - 100 / - Ball Vlv SP FB, ISO 17292, CL 150, FF, Floating Ball, Integral (Non-Extended) Bonnet, VBTAAADFF8CA1BRBBDZZZZZ
Lever , ASTM B148 UNS C95800, Aluminium Bronze, PTFE Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
Butterfly Valves
VY120 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF-, Wrench, ASTM A395 Grade 60-40-18, AISI VYLAA4EFFEA1BS1GCZZZZZ
316, EPDM Trim, Elastomeric Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VY125 200 - 300 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF-, Bevel Gear Operator, ASTM A395 Grade VYLAA4EFFAA1BS1GCZZZZZ
ASTM A194 Grade 2H Nuts
Check Valves
VC150 80 - 300 / - Lug Check Dual Pl , API 594 , CL 150, FF , ASTM B148 UNS C95800 , AISI 410, Stellite 6 VCWEAA2DFFZA1BRBCEAAMZZ
Trim , ASME B16.5
VC165 15 - 50 / - Piston Chk Vlv RB , BS 5154 Series A , PN 25, FF , Bltd Bonnet , ASTM B148 UNS VC1BB1AMFFFAA1BRBBFZZZZZ
C95800 , Aluminium Bronze Trim, Thermoplastic Seals
Globe Valves
VL185 80 - 200 / - Globe Vlv FB, API 602, PN 16, FF, Bltd Bonnet, Handwheel, ASTM A395 Grade 60-40-18, VLRAA5EFFAFA1BSBBAZZZZ
AISI 316, EPDM Trim, Elastomeric Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
Flanges
F305 15 - 50 / - Blind Flg., ASME B16.5, CL 150, FF , ASTM A105, Galvanized FBLABLDFFACGAADZ
BW Fittings
Forged Fittings
O512 40 - 300 / 15 - 50 Flangeolet, MSS SP-97, CL 150, FFFE , ASTM A105 O1AAAM9DFFACGZZZZ
Gaskets
G605 15 - 300 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF , Compressed non-asbestos sheet or fiber, GNMAB7DFFAWYBCAC
G610 15 - 300 / - Non Metal Flat Gskt, ASME B16.21, CL 300, FF , Compressed non-asbestos sheet or fiber, GNMAB7IFFAWYBCAC
Bolts & Nuts
D705 300 - 300 / - Spade, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 60, B16.5 DBPABMDFTAEY1AAD
Revision Number : 0
Page : 3 / 7

D710 300 - 300 / - Spacer ring, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 60, B16.5 DBSABMDFTAEY1AAD
D715 15 - 50 / - Spectacle Blind, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 60, ASME B16.5, DF8ABMDFTAEYBDEZ
Galvanized
D720 80 - 250 / - Spectacle Blind, ASME B16.48, CL 150, FFTBE , ASTM A516 Grade 60, B16.5 DF8ABMDFTAEY1AAD
Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1G304_BR Legend:

250 P T E Red. Tee
200 P P T P Pipe To Pipe
150 P P P T T Equal Tee
100 P P P P T
80 P P P P P T
50 A A A A A A T
40 A A A A A A E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
202 Pre-fab carbon steel pipe spools (DN 50 and below) shall be galvanized in accordance with ASTM A123.
X04 CORROSION ALLOWANCE : 0.0 mm for <=DN50
1.0 mm for >DN50
X08 Full port valves shall be used if indicated on the P&ID.
X37 Use raised face flanges and spiral wound gasket for connecting to raised face equipment nozzle, interface tie-ins, in-line instruments or at spec breaks.
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P5 PAATFRZBEEX 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Ball Valves
VB105 VGAVAQEFFAZCCZ ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VB110 VWAVAQEFFAZCCZ ZZ3A ZZ4A
Butterfly Valves
VY120 LGBVARBFFZDQZ ZZ3A ZZ4A ZZ6A
VY125 LGBVARBFFZBQZ ZZ8A ZZ1K ZZ1M
Check Valves
VC150 LQBDAQEFFZRC HC3A HC4A HC6A HC8A HC1K HC1M
VC165 LKAZAQCFFAJER ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Globe Valves
VL185 VUBQARBFFAJEQZ ZZ3A ZZ4A ZZ6A ZZ8A
Flanges
F305 FEALDCEFF CC0F CC0H CC1A CC1F CC2A
F306 FEALDCEFF ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
F325 FLALDCEFFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
F330 FLALDCFFFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
F335 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
F340 FLALDCFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B410 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B415 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
B430 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3K 3A3G 4A3G 6A3G 8A3E 1K3E 1M3E
Gaskets
G605 GCAREQEFFNA 0F1C 0H1C 1A1C 1F1C 2A1C 3A1C 4A1C 6A1C 8A1C 1K1C 1M1C
G610 GCAREQFFFNA 0F1C 0H1C 1A1C 1F1C 2A1C 3A1C 4A1C 6A1C 8A1C 1K1C 1M1C
D705 FAAMGVEFT AR1M
D710 FBAMGVEFT AR1M
D715 FCAMGVEFT BB0F BB0H BB1A BB1F BB2A
D720 FCAMGVEFT AR3A AR4A AR6A AR8A AR1K
Revision Number : 0
Page : 6 / 7
Reducing Component
20 x 15 NJAFKRBEAN0H3K0F3K
25 x 15 NJAFKRBEAN1A3K0F3K
25 x 20 NJAFKRBEAN1A3K0H3K
40 x 15 NMAGDCEFFZZ1F0F3K NNAGDCPECF1F3K0F3K
40 x 20 NJAFKRBEAN1F3K0H3K
40 x 25 NJAFKRBEAN1F3K1A3K
50 x 15 NMAGDCEFFZZ2A0F3K NNAGDCPECF2A3K0F3K
50 x 20 NMAGDCEFFZZ2A0H3K NNAGDCPECF2A3K0H3K NJAFKRBEAN2A3K0H3K
50 x 25 NJAFKRBEAN2A3K1A3K
50 x 40 NJAFKRBEAN2A3K1F3K
80 x 15 NMAGDCEFFZZ3A0F3K NNAGDCPECF3A3G0F3K
80 x 20 NMAGDCEFFZZ3A0H3K NNAGDCPECF3A3G0H3K
80 x 25 NMAGDCEFFZZ3A1A3K NNAGDCPECF3A3G1A3K
80 x 40 NEAFKRBEAN3A3G1F3K NFAFKRBEAN3A3G1F3K NMAGDCEFFZZ3A1F3K NNAGDCPECF3A3G1F3K
80 x 50 NEAFKRBEAN3A3G2A3K NFAFKRBEAN3A3G2A3K NMAGDCEFFZZ3A2A3K
100 x 40 NEAFKRBEAN4A3G1F3K NFAFKRBEAN4A3G1F3K NMAGDCEFFZZ4A1F3K NNAGDCPECF4A3G1F3K
100 x 50 NEAFKRBEAN4A3G2A3K NFAFKRBEAN4A3G2A3K NMAGDCEFFZZ4A2A3K
150 x 50 NMAGDCEFFZZ6A2A3K
200 x 15 NMAGDCEFFZZ8A0F3K NNAGDCPECF8A3E0F3K
200 x 20 NMAGDCEFFZZ8A0H3K NNAGDCPECF8A3E0H3K
200 x 25 NMAGDCEFFZZ8A1A3K NNAGDCPECF8A3E1A3K
200 x 40 NMAGDCEFFZZ8A1F3K NNAGDCPECF8A3E1F3K
200 x 50 NMAGDCEFFZZ8A2A3K
250 x 15 NMAGDCEFFZZ1K0F3K NNAGDCPECF1K3E0F3K
250 x 20 NMAGDCEFFZZ1K0H3K NNAGDCPECF1K3E0H3K
250 x 25 NMAGDCEFFZZ1K1A3K NNAGDCPECF1K3E1A3K
250 x 40 NMAGDCEFFZZ1K1F3K NNAGDCPECF1K3E1F3K
250 x 50 NMAGDCEFFZZ1K2A3K
250 x 200 NEAFKRBEAN1K3E8A3E NFAFKRBEAN1K3E8A3E
300 x 15 NMAGDCEFFZZ1M0F3K NNAGDCPECF1M3E0F3K
300 x 20 NMAGDCEFFZZ1M0H3K NNAGDCPECF1M3E0H3K
300 x 25 NMAGDCEFFZZ1M1A3K NNAGDCPECF1M3E1A3K
300 x 40 NMAGDCEFFZZ1M1F3K NNAGDCPECF1M3E1F3K
300 x 50 NMAGDCEFFZZ1M2A3K
300 x 250 NEAFKRBEAN1M3E1K3E NFAFKRBEAN1M3E1K3E
Revision Number : 0
Page : 7 / 7
BLT FOR STD FLG

100 8 5/8 x 100 BAAAAAZZ0G1A
150 8 3/4 x 110 BAAAAAZZ0H1C
200 8 3/4 x 110 BAAAAAZZ0H1C
250 12 7/8 x 120 BAAAAAZZ0J1E
BLT FOR WAFER LUG

80 4 5/8 x 140 BAAAAAZZ0G1J

150 8 3/4 x 170 BAAAAAZZ0H1Q
250 12 7/8 x 200 BAAAAAZZ0J2A
P_NOSBL
1N103DF
GRVE-Bisphenol A, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1N103DF
Revision Number : 0
Page : 2 / 7

TYPE OF MATERIAL : GRVE-Bisphenol A
Pressure (barG)
DN 50 to 600 16 16
DN 200 to 500 19.6 17.9
Size/Schedule for GRVE Pipe
Size (DN) 50 80 100 150 200 250 300 350 400 450 500 600
Schedule 7.0 mm 6.0 mm 6.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 14.0 mm 16.0 mm 18.0 mm 19.0 mm 23.0 mm
Size/Schedule for Carbon Steel Pipe

Size (DN) 200 250 300 350 400 450 500
Schedule S-30 S-30 S-30 S-20 S-20 S-20 S-20

Non-Metallic Inline Pipe
NP10 50 - 600 / - NM Pipe, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass Reinforced NPPIPAMSEAGRPBZZZZ
Vinyl Ester (GRVE), Bisphenol-A
Pipes & Tubes
In-Line Fittings, Non-Metallic
NT20 50 - 600 / - CAP, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass Reinforced NTCAPAMSEAGRPBZZZZ
NT25 50 - 600 / - 45 Deg Elbow, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTE45AMSEAGRPBZZZZ
Reinforced Vinyl Ester (GRVE), Bisphenol-A
NT45 80 - 600 / 50 - 500 Concentric Reducer, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTRECAMSEAGRPBZZZZ
NT50 80 - 600 / 50 - 500 Eccentric Reducer, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTREEAMSEAGRPBZZZZ
NT55 50 - 600 / - Equal Tee, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTTEEAMSEAGRPBZZZZ
NT60 200 - 600 / 150 - 500 Reducing Tee, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTTERAMSEAGRPBZZZZ
NT65 80 - 600 / 50 - 200 Reducing Saddle, Manufacturer's Standard, PN 16, FFFE , Glass Reinforced Vinyl Ester NT5ADAMSEAGRACZZZZ
(GRVE), Bisphenol-A
Butterfly Valves
VY105 150 - 500 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF, Bolted (Non-Extended) Bonnet, Extension VYLAA4ACFFAA1BSBBUZZZZZ
Stem, Bevel Gear Operator, ASTM A395 Grade 60-40-18, Aluminium Bronze, EPDM Trim,
Elastomeric Seals, ASTM A193 Grade B8M-Class 1 Bolts/Studs, ASTM A194 Grade 8M
Nuts, Water, UL/FM
Surface-mounted fittings
NA200 50 - 600 / - Flange, Manufacturer's Standard, CL 150, Plain End Butt And Strap Joint x FFFE , Glass NAFLGAMSATAGRBFZZZZ
NA210 50 - 600 / - Blind Flange, Manufacturer's Standard, CL 150, FFFE , Glass Reinforced Vinyl Ester NAFLBAMSATAGRACZZZZ
(GRVE), Bisphenol-A
Flanges
F220 200 - 500 / - SO Flg, ASME B16.5, CL 150, FF, ASTM A105 FSGABLDFFACGZZZZ
Gaskets
Bolts & Nuts
L650 18 - 28.575 / - Stud Bolt, BS 4882 , ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts, 2 FL Washers LS1B1AAA1ANAABZ
Revision Number : 0
Page : 3 / 7
BR Degree BRANCH CONNECTION

Legend and chart
Branch Table: RAPID_1N103DF_BR Legend:

BRANCH SIZES 5AD Reducing Saddle
600 T E Red. Tee
500 E T T Equal Tee
450 E E T
400 E E E T
350 E E E E T
300 E E E E E T
250 E E E E E E T
200 5AD 5AD 5AD 5AD 5AD E E T
150 5AD E 5AD 5AD 5AD 5AD E E T
100 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD T
80 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD T
50 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD T
600 500 450 400 350 300 250 200 150 100 80 50
RUN SIZES
NOTES:
40 For requirements regarding GRP piping systems see TOSP-P038-EXE-DEC-0001-PIP-SPN-0016 Specification for Glass-Fibre Reinforced Plastic Pipeline
and Piping System.
41 Bolts for GRP flanges to be provided with washers.
42 Piping material: glass reinforced vinylester resin Bisphenol A "post-cured".
43 Flanges to be drilled acc. to ASME B16.5 class 150.
170 Thickness of GRVE fitting is increased at marked locations in isometrics due to GRVE vendor recommendation.
192 Hydrotesting and flushing shall be done with normal rubber gaskets.
193 GRVE Pipes & fittings Schedule shall confirm to PN16.
194 GRVE Stiffness shall be SN 5000 N/m2.
195 GRVE Pipes shall confirm to AWWA C950.
210 Bolts for GRVE flanges to be provided with washers.
X12 The schedules of the GRVE pipes differs per manufacturer.
X13 Any smaller length of GRVE pipes if installed at above ground shall be provided with UV protection.
X15 Post Indicator Valve details to be referred to datasheet TOSP-P038-EXE-DEC-3900-PIP-TDS-0011 Data Sheet for PIV for Firewater for Scope 1.
X20 Reducing saddle is flanged end olet or plain end olet.
X21 This specification is based on FIBERBOND Piping Specification - Series 20FR16.
X22 Branch fitting with flanged end branch outlet shall be used only where required.
X23 Washers shall be ANSI B18.22.1 Type A Narrow SAE series Circular type.
X24 Slip on flanges to be used only for removable spool inside valve pit.
X28 Corrosion allowance for GRVE is 0.0 mm and for Carbon Steel is 3.0 mm.
Revision Number : 0
Page : 4 / 7
Nominal Pipe Size
Short Code PMRC 50 80 100 150 200 250 300 350 400 450 500 600

NP10 PPTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3 2P5L
Pipes & Tubes
P15 PAATFPZBEEX 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E
NT20 RPTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3 2P5L
NT25 NBTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3 2P5L
NT30 NCTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3 2P5L
NT55 NHTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3 2P5L
Butterfly Valves
VY105 LGBVARBFFBBBDC ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
NA200 FTTLGRUBFZZZ 2A4J 3A4J 4A4J 6A4J 8A4J 1K4J 1M4J 1P4J 1R4J 1T4J 2K4J 2P4J
NA210 FXTLGRUFFZ ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Flanges
F220 FPALDCEFF ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
F230 FEALDCEFF ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
Gaskets
G620 GCARDVEFFDU 1P0H 1R0H 1T0H 2K0H 2P0H
Revision Number : 0
Page : 5 / 7
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Reducing Saddle Reducing Tee
80 x 50 NETLGRBPBZZZ3A8X2A8P NFTLGRBPBZZZ3A8X2A8P RDTLGRBFFZZZ3A8X2A8P

100 x 80 NETLGRBPBZZZ4A8X3A8XNFTLGRBPBZZZ4A8X3A8XRDTLGRBFFZZZ4A8X3A8X
200 x 50 RDTLGRBFFZZZ8A7J2A8P
200 x 80 NETLGRBPBZZZ8A7J3A8X NFTLGRBPBZZZ8A7J3A8X RDTLGRBFFZZZ8A7J3A8X
200 x 150 NETLGRBPBZZZ8A7J6A8X NFTLGRBPBZZZ8A7J6A8X NJTLGRBPBZZZ8A7J6A8X
250 x 50 RDTLGRBFFZZZ1K7D2A8P
250 x 80 RDTLGRBFFZZZ1K7D3A8X
250 x 100 NETLGRBPBZZZ1K7D4A8XNFTLGRBPBZZZ1K7D4A8XRDTLGRBFFZZZ1K7D4A8X
250 x 150 NETLGRBPBZZZ1K7D6A8XNFTLGRBPBZZZ1K7D6A8X NJTLGRBPBZZZ1K7D6A8X
250 x 200 NETLGRBPBZZZ1K7D8A7J NFTLGRBPBZZZ1K7D8A7J NJTLGRBPBZZZ1K7D8A7J
300 x 50 RDTLGRBFFZZZ1M0C2A8P
300 x 80 RDTLGRBFFZZZ1M0C3A8X
300 x 150 NETLGRBPBZZZ1M0C6A8XNFTLGRBPBZZZ1M0C6A8XRDTLGRBFFZZZ1M0C6A8X
300 x 200 NETLGRBPBZZZ1M0C8A7J NFTLGRBPBZZZ1M0C8A7J NJTLGRBPBZZZ1M0C8A7J
300 x 250 NETLGRBPBZZZ1M0C1K7DNFTLGRBPBZZZ1M0C1K7D NJTLGRBPBZZZ1M0C1K7D
350 x 50 RDTLGRBFFZZZ1P9A2A8P
350 x 80 RDTLGRBFFZZZ1P9A3A8X
350 x 150 NFTLGRBPBZZZ1P9A6A8X RDTLGRBFFZZZ1P9A6A8X
350 x 200 NETLGRBPBZZZ1P9A8A7J NFTLGRBPBZZZ1P9A8A7J RDTLGRBFFZZZ1P9A8A7J
350 x 250 NETLGRBPBZZZ1P9A1K7D NFTLGRBPBZZZ1P9A1K7D NJTLGRBPBZZZ1P9A1K7D
350 x 300 NETLGRBPBZZZ1P9A1M0CNFTLGRBPBZZZ1P9A1M0C NJTLGRBPBZZZ1P9A1M0C
400 x 50 RDTLGRBFFZZZ1R7N2A8P
400 x 80 RDTLGRBFFZZZ1R7N3A8X
400 x 200 RDTLGRBFFZZZ1R7N8A7J
400 x 250 NETLGRBPBZZZ1R7N1K7DNFTLGRBPBZZZ1R7N1K7D NJTLGRBPBZZZ1R7N1K7D
400 x 300 NETLGRBPBZZZ1R7N1M0CNFTLGRBPBZZZ1R7N1M0C NJTLGRBPBZZZ1R7N1M0C
400 x 350 NETLGRBPBZZZ1R7N1P9A NFTLGRBPBZZZ1R7N1P9A NJTLGRBPBZZZ1R7N1P9A
450 x 50 RDTLGRBFFZZZ1T0H2A8P
450 x 80 RDTLGRBFFZZZ1T0H3A8X
450 x 200 RDTLGRBFFZZZ1T0H8A7J
450 x 250 NJTLGRBPBZZZ1T0H1K7D
450 x 300 NETLGRBPBZZZ1T0H1M0CNFTLGRBPBZZZ1T0H1M0C NJTLGRBPBZZZ1T0H1M0C
450 x 350 NETLGRBPBZZZ1T0H1P9A NFTLGRBPBZZZ1T0H1P9A NJTLGRBPBZZZ1T0H1P9A
450 x 400 NETLGRBPBZZZ1T0H1R7N NFTLGRBPBZZZ1T0H1R7N NJTLGRBPBZZZ1T0H1R7N
500 x 50 RDTLGRBFFZZZ2KA32A8P
500 x 80 RDTLGRBFFZZZ2KA33A8X
500 x 150 NJTLGRBPBZZZ2KA36A8X
500 x 200 RDTLGRBFFZZZ2KA38A7J
500 x 250 NJTLGRBPBZZZ2KA31K7D
500 x 300 NJTLGRBPBZZZ2KA31M0C
500 x 350 NETLGRBPBZZZ2KA31P9A NFTLGRBPBZZZ2KA31P9A NJTLGRBPBZZZ2KA31P9A
500 x 400 NETLGRBPBZZZ2KA31R7NNFTLGRBPBZZZ2KA31R7N NJTLGRBPBZZZ2KA31R7N
500 x 450 NETLGRBPBZZZ2KA31T0H NFTLGRBPBZZZ2KA31T0H NJTLGRBPBZZZ2KA31T0H
600 x 50 RDTLGRBFFZZZ2P5L2A8P
600 x 80 RDTLGRBFFZZZ2P5L3A8X
Revision Number : 0
Page : 6 / 7
600 x 200 RDTLGRBFFZZZ2P5L8A7J

600 x 250 NJTLGRBPBZZZ2P5L1K7D
600 x 300 NJTLGRBPBZZZ2P5L1M0C
600 x 350 NJTLGRBPBZZZ2P5L1P9A
600 x 400 NETLGRBPBZZZ2P5L1R7N NFTLGRBPBZZZ2P5L1R7N NJTLGRBPBZZZ2P5L1R7N
600 x 450 NETLGRBPBZZZ2P5L1T0H NFTLGRBPBZZZ2P5L1T0H NJTLGRBPBZZZ2P5L1T0H
600 x 500 NETLGRBPBZZZ2P5L2KA3 NFTLGRBPBZZZ2P5L2KA3 NJTLGRBPBZZZ2P5L2KA3
BLT FOR GRVE TO CS F BLT FOR GRVE FLANGE BLT FOR WFR LG TO CS
50 4 5/8 x 90 BAAAAARY0G0U 50 4 5/8 x 90 BAAAAARY0G0U 50 4 5/8 x 140 BAAAAARY0G1J

80 4 5/8 x 100 BAAAAARY0G1A 80 4 5/8 x 100 BAAAAARY0G1A 80 4 5/8 x 150 BAAAAARY0G1L
100 8 5/8 x 110 BAAAAARY0G1C 100 8 5/8 x 110 BAAAAARY0G1C 100 8 5/8 x 170 BAAAAARY0G1Q
150 8 3/4 x 120 BAAAAARY0H1E 150 8 3/4 x 130 BAAAAARY0H1G 150 8 3/4 x 190 BAAAAARY0H1U
200 8 3/4 x 130 BAAAAARY0H1G 200 8 3/4 x 140 BAAAAARY0H1J 200 8 3/4 x 200 BAAAAARY0H2A
250 12 7/8 x 150 BAAAAARY0J1L 250 12 7/8 x 160 BAAAAARY0J1N 250 12 7/8 x 220 BAAAAARY0J2E
300 12 7/8 x 150 BAAAAARY0J1L 300 12 7/8 x 170 BAAAAARY0J1Q 300 12 7/8 x 240 BAAAAARY0J2J
350 12 1 x 170 BAAAAARY1A1Q 350 12 1 x 190 BAAAAARY1A1U 350 12 1 x 260 BAAAAARY1A2N
400 16 1 x 180 BAAAAARY1A1S 400 16 1 x 200 BAAAAARY1A2A 400 16 1 x 290 BAAAAARY1A2U
450 16 1-1/8 x 190 BAAAAARY1B1U 450 16 1-1/8 x 210 BAAAAARY1B2C 450 16 1-1/8 x 310 BAAAAARY1B3C
500 20 1-1/8 x 200 BAAAAARY1B2A 500 20 1-1/8 x 220 BAAAAARY1B2E 500 20 1-1/8 x 340 BAAAAARY1B3J
Revision Number : 0
Page : 7 / 7
BLT WFR LG TO GRVE

50 4 5/8 x 140 BAAAAARY0G1J

80 4 5/8 x 150 BAAAAARY0G1L
100 8 5/8 x 170 BAAAAARY0G1Q
150 8 3/4 x 190 BAAAAARY0H1U
200 8 3/4 x 200 BAAAAARY0H2A
250 12 7/8 x 230 BAAAAARY0J2G
300 12 7/8 x 260 BAAAAARY0J2N
350 12 1 x 270 BAAAAARY1A2Q
400 16 1 x 310 BAAAAARY1A3C
450 16 1-1/8 x 330 BAAAAARY1B3G
500 20 1-1/8 x 360 BAAAAARY1B3N
P_NOSBL
1S105DF
Stainless Steel AISI 316, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1S105DF
Revision Number : 0
Page : 2 / 8

TYPE OF MATERIAL : Stainless Steel AISI 316
Temperature (oC) -20 0 50 100 150 200 250 300 350 400
Pressure (barG)
DN 15 to 600 19.0 19.0 18.4 16.2 14.8 13.7 12.1 10.2 8.4 6.5
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
Schedule S-40S S-40S S-10S S-10S S-10S S-10S S-10S S-10S S-10S S-10S S-10S S-10S
400 450 500 600
S-10S S-10S S-10S S-10S

Pipes & Tubes
P5 15 - 300 / - Pipe, ASME B36.19M, BE, ASTM A312 Grade TP316L PPPABRBEAT8ZZZZ
P10 350 - 600 / - Pipe, ASME B36.19M, BE, ASTM A358 316L CL1 PPPABRBEA1AEZZZZ
Check Valves
VC105 15 - 40 / - Piston Chk Vlv RB, API 602, CL 150, RF, Bltd Bonnet, ASTM A182 Grade F 316, AISI VC1BAA5DRFAARQ3APZZZZ
316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 2 Bolts/Studs, ASTM
A194 Grade 8M Nuts
VC110 50 - 250 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A351-CF8M , AISI 316, VCSCBWDDRFAAR92BZZZZZ
Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs, ASTM A194
Grade 8M Nuts
VC115 300 - 600 / - Dual Plate Check, API 594, CL 150, RF, ASTM A351-CF8M, AISI 316, Stellite 6 Trim VCWFAA2DRFZAR92ABZZZZ
Gate Valves
VG120 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bltd Bonnet, n-ext, Handwheel , ASTM A182 Grade F VG3AA5DRF8FARQ3APZZZZ
316, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 2 Bolts/Studs,
VG125 50 - 300 / - Gate Vlv FB, API 603, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A351-CF8M, AISI VGRAA6DRFAFAR92BZZZZZ
A194 Grade 8M Nuts
VG130 350 - 600 / - Gate Vlv FB, API 603, CL 150, RF, Bltd Bonnet, Bevel Gear Operator, ASTM A351-CF8M, VGRAA6DRFAAAR92BZZZZZ
AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs,
Globe Valves
VL135 15 - 40 / - Globe Valve RB, API 602, CL 150, RF, Bltd Bonnet, n-ext, Handwheel , ASTM A182 Grade VL3AA5DRF8FARQ3APZZZZ
F 316, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 2
Bolts/Studs, ASTM A194 Grade 8M Nuts-
VL140 50 - 150 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A351-CF8M, AISI VLRBWEDRFAFAR92BZZZZZ
A194 Grade 8M Nuts
VL145 200 - 400 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Bevel Gear Operator , ASTM A351- VLRBWEDRFAAAR92BZZZZZZ
CF8M, AISI 316, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 1
Ball Valves
VB150 50 - 150 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBTEAADRF8CAR9BBFZZZZZ
Lever , ASTM A351-CF8M, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM
A193 Grade B8M Class 2 Bolts/Studs, ASTM A194 Grade 8M Nuts
VB155 200 - 300 / - Ball Vlv Std Ptn FB, API 6D, CL 150, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9DRF5AAR9BBFZZZZ
Bonnet, Bevel Gear Operator, ASTM A351-CF8M, AISI 316, PTFE Trim,
Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 2 Bolts/Studs, ASTM A194
Grade 8M Nuts
VB160 150 - 150 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLEAADRF8CAR9BBFZZZZZ
Lever , ASTM A351-CF8M, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM
A193 Grade B8M Class 2 Bolts/Studs, ASTM A194 Grade 8M Nuts
Flanges
F305 15 - 600 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A182 Grade F 316/F 316L FBLABLDRFAWFZZZZ
F325 15 - 600 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A182 Grade F 316/F 316L FWNABLDRFAWFZZZZ
F330 20 - 500 / - WN Flg., ASME B16.5, CL 300, RFFE , ASTM A182 Grade F 316/F 316L FWNABLIRFAWFZZZZ
BW Fittings
B405 15 - 600 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, BE4LABMBEA1AD1AAC
Seamless/Welded
B410 15 - 600 / - 90 Deg. LR Elbow, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, BE9LABMBEA1AD1AAC
Seamless/Welded
B420 15 - 600 / - Cap, ASME B16.9, BE , ASTM A403 Class WP-S-316L, Seamless/Welded BCAPABMBEA1AI1AAC
B430 20 - 600 / 15 - 500 Con. Reducer, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, Seamless/Welded BRECABMBEA1AD1AAC
B440 20 - 600 / 15 - 500 Ecc. Reducer, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, Seamless/Welded BREEABMBEA1AD1AAC
B450 15 - 600 / - Equal Tee, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, Seamless/Welded BTEEABMBEA1AD1AAC
B460 20 - 600 / 15 - 500 Red. Tee, ASME B16.9, BE , ASTM A403 Class WP-S/WX-316L, Seamless/Welded BTERABMBEA1AD1AAC
B476 150 - 600 / 50 - 250 Weldolet, MSS SP-97, BE , ASTM A182 Grade F 316/F 316L BWELAM9BEAWFZZZZ
Forged Fittings
O505 40 - 600 / 15 - 40 Nippolet, MSS SP-97, PE , ASTM A182 Grade F 316/F 316L, CL 3000 O1ABAM9PEAWF1AAU
Revision Number : 0
Page : 3 / 8

Forged Fittings
O510 40 - 600 / 15 - 40 Flangeolet, MSS SP-97, CL 150, RFFE , ASTM A182 Grade F 316/F 316L, DWG No. O1AAAM9DRFAWFGKJZ
D12.92.331-C
Gaskets
Bolts & Nuts
D710 300 - 600 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A240 Type 316/316L, B16.5 DBPABMDRTA1HR1AAD
D720 300 - 600 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A240 Type 316/316L, B16.5 DBSABMDRTA1HR1AAD
D730 15 - 250 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A240 Type 316/316L, B16.5 DF8ABMDRTA1HR1AAD
Revision Number : 0
Page : 4 / 8

Legend and chart
Branch Table: CLASS1S105DF_BR Legend:

BRANCH SIZES A Flangeolet/Nippolet
600 T E Red. Tee
500 E T T Equal Tee
400 E E E T
350 E E E E T
300 E E E E E T
250 W W E E E E T
200 W W W W E E E T
100 W W W W W W E E E T
80 W W W W W W W W E E T
50 W W W W W W W W W E E T
40 A A A A A A A A A A A E T
20 A A A A A A A A A A A A E E T
600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
X26 The selection of a ball valve will de-rate this pipe class in accordance with ISO 17292/API 6D.
Revision Number : 0
Page : 5 / 8
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600
Pipes & Tubes

P5 PAAUGAZBEZZ 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
P10 PAAUEJZBEZZ 1P3C 1R3C 1T3C 2K3C 2P3C
Check Valves
VC105 LKBEDRERFAJDY ZZ0F ZZ0H ZZ1A ZZ1F
VC110 LNBBBUERFAJEX ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K
VC115 LRBDBUERFZEK ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Gate Valves
VG120 VJBJDRERFAGEJA ZZ0F ZZ0H ZZ1A ZZ1F
VG125 VQBKBUERFAJEJC ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
VG130 VQBKBUERFAJBJC ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Globe Valves
VL135 VTBQDRERFAGEKS ZZ0F ZZ0H ZZ1A ZZ1F
VL140 VUBNBUERFAJEKU ZZ2A ZZ3A ZZ4A ZZ6A
VL145 VUBNBUERFAJBKU ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R
Ball Valves
VB150 VWAVBUERFAZCDB ZZ2A ZZ3A ZZ4A ZZ6A
VB155 VDAXBUERFAWBDB ZZ8A ZZ1K ZZ1M
VB160 VEAVBUERFAZCDB ZZ6A
Flanges
F305 FEALDVERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
F325 FLALDVERFZZ 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C 2P3C
F330 FLALDVFRFZZ 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C
BW Fittings
B405 NBAFHGBEAB 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C 2P3C
B410 NCAFHGBEAB 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C 2P3C
B420 NAAFHLBEAB 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C 2P3C
B450 NHAFHGBEAB 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C 1P3C 1R3C 1T3C 2K3C 2P3C
Gaskets
G611 GEASDUFRFDJ 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D
D710 FAAMUUERT AR1M AR1P AR1R AR1T AR2K AR2P
D720 FBAMUUERT AR1M AR1P AR1R AR1T AR2K AR2P
D730 FCAMUUERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K
Revision Number : 0
Page : 6 / 8
Reducing Component
20 x 15 NEAFHGBEAB0H3H0F3H NFAFHGBEAB0H3H0F3H NJAFHGBEAB0H3H0F3H

25 x 15 NEAFHGBEAB1A3C0F3H NFAFHGBEAB1A3C0F3H NJAFHGBEAB1A3C0F3H
25 x 20 NEAFHGBEAB1A3C0H3H NFAFHGBEAB1A3C0H3H NJAFHGBEAB1A3C0H3H
40 x 15 NEAFHGBEAB1F3C0F3H NFAFHGBEAB1F3C0F3H NMAGDVERF6N1F0F3H NNAGDVPECF1F3C0F3H
40 x 20 NEAFHGBEAB1F3C0H3H NFAFHGBEAB1F3C0H3H NJAFHGBEAB1F3C0H3H
40 x 25 NEAFHGBEAB1F3C1A3C NFAFHGBEAB1F3C1A3C NJAFHGBEAB1F3C1A3C
50 x 15 NMAGDVERF6N2A0F3H NNAGDVPECF2A3C0F3H
50 x 20 NEAFHGBEAB2A3C0H3H NFAFHGBEAB2A3C0H3H NMAGDVERF6N2A0H3H NNAGDVPECF2A3C0H3H
50 x 25 NEAFHGBEAB2A3C1A3C NFAFHGBEAB2A3C1A3C NJAFHGBEAB2A3C1A3C
50 x 40 NEAFHGBEAB2A3C1F3C NFAFHGBEAB2A3C1F3C NJAFHGBEAB2A3C1F3C
80 x 20 NMAGDVERF6N3A0H3H NNAGDVPECF3A3C0H3H
80 x 25 NMAGDVERF6N3A1A3C NNAGDVPECF3A3C1A3C
80 x 40 NEAFHGBEAB3A3C1F3C NFAFHGBEAB3A3C1F3C NMAGDVERF6N3A1F3C NNAGDVPECF3A3C1F3C
100 x 40 NEAFHGBEAB4A3C1F3C NFAFHGBEAB4A3C1F3C NMAGDVERF6N4A1F3C NNAGDVPECF4A3C1F3C
150 x 40 NMAGDVERF6N6A1F3C NNAGDVPECF6A3C1F3C
150 x 50 NKAGDVBEZZ6A3C2A3C
200 x 40 NMAGDVERF6N8A1F3C NNAGDVPECF8A3C1F3C
250 x 15 NMAGDVERF6N1K0F3H NNAGDVPECF1K3C0F3H
250 x 20 NMAGDVERF6N1K0H3H NNAGDVPECF1K3C0H3H
250 x 25 NMAGDVERF6N1K1A3C NNAGDVPECF1K3C1A3C
250 x 40 NMAGDVERF6N1K1F3C NNAGDVPECF1K3C1F3C
250 x 50 NKAGDVBEZZ1K3C2A3C
250 x 100 NEAFHGBEAB1K3C4A3C NFAFHGBEAB1K3C4A3C NJAFHGBEAB1K3C4A3C
300 x 15 NMAGDVERF6N1M0F3H NNAGDVPECF1M3C0F3H
300 x 20 NMAGDVERF6N1M0H3H NNAGDVPECF1M3C0H3H
300 x 25 NMAGDVERF6N1M1A3C NNAGDVPECF1M3C1A3C
300 x 40 NMAGDVERF6N1M1F3C NNAGDVPECF1M3C1F3C
300 x 50 NKAGDVBEZZ1M3C2A3C
300 x 150 NEAFHGBEAB1M3C6A3C NFAFHGBEAB1M3C6A3C NJAFHGBEAB1M3C6A3C
300 x 200 NEAFHGBEAB1M3C8A3C NFAFHGBEAB1M3C8A3C NJAFHGBEAB1M3C8A3C
300 x 250 NEAFHGBEAB1M3C1K3C NFAFHGBEAB1M3C1K3C NJAFHGBEAB1M3C1K3C
350 x 15 NMAGDVERF6N1P0F3H NNAGDVPECF1P3C0F3H
350 x 20 NMAGDVERF6N1P0H3H NNAGDVPECF1P3C0H3H
350 x 25 NMAGDVERF6N1P1A3C NNAGDVPECF1P3C1A3C
350 x 40 NMAGDVERF6N1P1F3C NNAGDVPECF1P3C1F3C
Revision Number : 0
Page : 7 / 8
350 x 50 NKAGDVBEZZ1P3C2A3C
350 x 150 NEAFHGBEAB1P3C6A3C NFAFHGBEAB1P3C6A3C NKAGDVBEZZ1P3C6A3C
350 x 200 NEAFHGBEAB1P3C8A3C NFAFHGBEAB1P3C8A3C NJAFHGBEAB1P3C8A3C
350 x 250 NEAFHGBEAB1P3C1K3C NFAFHGBEAB1P3C1K3C NJAFHGBEAB1P3C1K3C
350 x 300 NEAFHGBEAB1P3C1M3C NFAFHGBEAB1P3C1M3C NJAFHGBEAB1P3C1M3C
400 x 15 NMAGDVERF6N1R0F3H NNAGDVPECF1R3C0F3H
400 x 20 NMAGDVERF6N1R0H3H NNAGDVPECF1R3C0H3H
400 x 25 NMAGDVERF6N1R1A3C NNAGDVPECF1R3C1A3C
400 x 40 NMAGDVERF6N1R1F3C NNAGDVPECF1R3C1F3C
400 x 50 NKAGDVBEZZ1R3C2A3C
400 x 200 NEAFHGBEAB1R3C8A3C NFAFHGBEAB1R3C8A3C NKAGDVBEZZ1R3C8A3C
400 x 250 NEAFHGBEAB1R3C1K3C NFAFHGBEAB1R3C1K3C NJAFHGBEAB1R3C1K3C
400 x 300 NEAFHGBEAB1R3C1M3C NFAFHGBEAB1R3C1M3C NJAFHGBEAB1R3C1M3C
400 x 350 NEAFHGBEAB1R3C1P3C NFAFHGBEAB1R3C1P3C NJAFHGBEAB1R3C1P3C
450 x 15 NMAGDVERF6N1T0F3H NNAGDVPECF1T3C0F3H
450 x 20 NMAGDVERF6N1T0H3H NNAGDVPECF1T3C0H3H
450 x 25 NMAGDVERF6N1T1A3C NNAGDVPECF1T3C1A3C
450 x 40 NMAGDVERF6N1T1F3C NNAGDVPECF1T3C1F3C
450 x 50 NKAGDVBEZZ1T3C2A3C
450 x 250 NEAFHGBEAB1T3C1K3C NFAFHGBEAB1T3C1K3C NJAFHGBEAB1T3C1K3C
450 x 300 NEAFHGBEAB1T3C1M3C NFAFHGBEAB1T3C1M3C NJAFHGBEAB1T3C1M3C
450 x 350 NEAFHGBEAB1T3C1P3C NFAFHGBEAB1T3C1P3C NJAFHGBEAB1T3C1P3C
450 x 400 NEAFHGBEAB1T3C1R3C NFAFHGBEAB1T3C1R3C NJAFHGBEAB1T3C1R3C
500 x 15 NMAGDVERF6N2K0F3H NNAGDVPECF2K3C0F3H
500 x 20 NMAGDVERF6N2K0H3H NNAGDVPECF2K3C0H3H
500 x 25 NMAGDVERF6N2K1A3C NNAGDVPECF2K3C1A3C
500 x 40 NMAGDVERF6N2K1F3C NNAGDVPECF2K3C1F3C
500 x 250 NKAGDVBEZZ2K3C1K3C
500 x 300 NEAFHGBEAB2K3C1M3C NFAFHGBEAB2K3C1M3C NJAFHGBEAB2K3C1M3C
500 x 350 NEAFHGBEAB2K3C1P3C NFAFHGBEAB2K3C1P3C NJAFHGBEAB2K3C1P3C
500 x 400 NEAFHGBEAB2K3C1R3C NFAFHGBEAB2K3C1R3C NJAFHGBEAB2K3C1R3C
500 x 450 NEAFHGBEAB2K3C1T3C NFAFHGBEAB2K3C1T3C NJAFHGBEAB2K3C1T3C
600 x 15 NMAGDVERF6N2P0F3H NNAGDVPECF2P3C0F3H
600 x 20 NMAGDVERF6N2P0H3H NNAGDVPECF2P3C0H3H
600 x 25 NMAGDVERF6N2P1A3C NNAGDVPECF2P3C1A3C
600 x 40 NMAGDVERF6N2P1F3C NNAGDVPECF2P3C1F3C
600 x 250 NKAGDVBEZZ2P3C1K3C
600 x 300 NJAFHGBEAB2P3C1M3C
600 x 350 NJAFHGBEAB2P3C1P3C
600 x 400 NEAFHGBEAB2P3C1R3C NFAFHGBEAB2P3C1R3C NJAFHGBEAB2P3C1R3C
Revision Number : 0
Page : 8 / 8
600 x 450 NEAFHGBEAB2P3C1T3C NFAFHGBEAB2P3C1T3C NJAFHGBEAB2P3C1T3C

600 x 500 NEAFHGBEAB2P3C2K3C NFAFHGBEAB2P3C2K3C NJAFHGBEAB2P3C2K3C


200 8 3/4 x 130 BAAAAAZZ0H1G 350 12 1 x 140 BAAAAAZZ1A1J
400 16 1 x 170 BAAAAAZZ1A1Q 500 20 1-1/8 x 160 BAAAAAZZ1B1N
450 16 1-1/8 x 180 BAAAAAZZ1B1S 600 20 1-1/4 x 180 BAAAAAZZ1D1S
500 20 1-1/8 x 200 BAAAAAZZ1B2A
P_NOSBL
3C102DF-KS
Carbon Steel LT [A], Class 300, Category M
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 3C102DF-KS
Revision Number : 0
Page : 2 / 6

RATING CLASS : 300
TYPE OF MATERIAL : Carbon Steel LT [A]
Temperature (oC) -20 0 50 75 100 125 150
Pressure (barG)
DN 15 to 50 51.1 51.1 50.1 48.3 46.6 38.9 28.3
DN 80 to 100 51.0 51.0 47.8 40.4 33.1 25.8 18.4
DN 150 to 200 42.9 42.9 42.9 40.4 33.1 25.8 18.4
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200
Schedule S-80 S-80 S-80 S-80 S-40 S-40 S-40 S-40 S-30

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE , ASTM A333-6, Seamless PPPABQPEAD4AAGZ
P15 50 - 200 / - Pipe, ASME B36.10M, BE , ASTM A333-6, Seamless PPPABQBEAD4AAGZ
Gate Valves
VG30 15 - 40 / - Gate Vlv BL Seal RB, API 602, CL 300, BE, Welded Extension Bonnet Handwheel, ASTM VG2AA5IBE12FACRCATZZZZ
A350 Grade LF2 Class 1, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7
Bolts/Studs, ASTM A194 Grade 4 Nuts
VG35 50 - 200 / - Gate Vlv BL Seal FB, API 600, CL 300, BE, Bolted Extension Bonnet, Handwheel , ASTM VG9AA4IBE4FA1BCCATZZZZZ
A352 Grade LCC, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7
VG40 15 - 40 / - Gate Vlv BL Seal RB, API 602, CL 300, BE, Welded Bonnet, Handwheel, ASTM A350 VG2AA5IBECFACRCATZZZZ
Grade LF2 Class 1, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7
VG45 50 - 200 / - Gate Vlv BL Seal FB, API 600, CL 300, BE, Bltd Bonnet, Handwheel , ASTM A352 Grade VG9AA4IBEAFA1BCCATZZZZZ
LCC, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A320 Grade L7 Bolts/Studs, ASTM
A194 Grade 4 Nuts
Flanges
F305 15 - 200 / - Blind Flg., ASME B16.5, CL 300, RFFE , ASTM A350 Grade LF2 Class 1 FBLABLIRFACRZZZZ
F330 15 - 200 / - WN Flg., ASME B16.5, CL 300, RFFE , ASTM A350 Grade LF2 Class 1 FWNABLIRFACRZZZZ
BW Fittings
B405 15 - 200 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BE4LABMBEAYU1ADL
B415 15 - 200 / - 90 Deg. LR Elbow, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BE9LABMBEAYU1ADL
B425 15 - 200 / - Cap, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BCAPABMBEAYU1ADL
B435 20 - 200 / 15 - 150 Con. Reducer, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BRECABMBEAYU1ADL
B445 20 - 200 / 15 - 150 Ecc. Reducer, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BREEABMBEAYU1ADL
B455 15 - 200 / - Equal Tee, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BTEEABMBEAYU1ADL
B465 20 - 200 / 15 - 150 Red. Tee, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless, Low Temp BTERABMBEAYU1ADL
B475 150 - 200 / 50 - 80 Weldolet, MSS SP-97, BE , ASTM A350 Grade LF2 Class 1, Low Temp BWELAM9BEACR1ADM
B479 15 - 200 / - 30 Deg. Elbow 5D, ASME B16.9, BE , ASTM A420 Grade WPL6, Seamless BE35ABMBEAYUABAZ
Forged Fittings
O505 40 - 200 / 15 - 40 Flangeolet, MSS SP-97, CL 300, RFFE , ASTM A350 Grade LF2 Class 1 O1AAAM9IRFACRZZZZ
O510 40 - 200 / 15 - 40 Nippolet, MSS SP-97, MTE , ASTM A350 Grade LF2 Class 1, CL 3000 O1ABAM9TMACR1AAU
O520 15 - 40 / - CAP, ASME B16.11, CL 3000, FTE , ASTM A350 Grade LF2 Class 1 OCAPAB2STFACRZZZZ
Gaskets
G600 15 - 200 / - Gasket camprofile, BS EN 12560 Part 6, CL 300, RF, AISI 316, Graphite SS Centring Ring, G1AB1ACIRFA1AX1AAT
WT 4 mm
Bolts & Nuts
L650 15 - 200 / - Stud Bolt, BS 4882 , ASTM A320-L7 Bolts/Studs/ASTM A194-4 Nuts- LS1B1AAA1AQZZZZ
D705 15 - 200 / - Spade, ASME B16.48, CL 300, RFTBE , ASTM A516 Grade 60, B16.5 DBPABMIRTAEY1AAD
D720 15 - 200 / - Spacer ring, ASME B16.48, CL 300, RFTBE , ASTM A516 Grade 60, B16.5 DBSABMIRTAEY1AAD
D735 15 - 200 / - Spectacle Blind, ASME B16.48, CL 300, RFTBE , ASTM A516 Grade 60, B16.5 DF8ABMIRTAEY1AAD
Revision Number : 0
Page : 3 / 6

Legend and chart
Branch Table: CLASS3C102DA-KS_BR Legend:

200 T E Red. Tee
150 E T T Equal Tee
80 W E E T
50 W W E E T
40 A A A A E T
25 A A A A E E T
20 A A A A A E E T
200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
34 Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 and ASME B31.3 allowable internal pressure and limited by ISO17292 ball valve rating.
167 Non extended bonnet valves shall be used for short term low temperature excursion (e.g. non operable during depressurization) or for non insulated piping
only.
169 Spectacle blinds shall not be installed in pipes with operating temperatures below 0 deg C and at places where the temperature is below the dew point. In
both cases, the spades shall be used instead.
X04 Vents and drain connections, and pressure and temperature instrument assemblies. See TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Attachment-2 Piping
Construction Standard Drawing.
X18 5D elbow radius to be referred to TOSP-P038-EXE-DEC-0001-PIP-SPN-0012 Specification for Piping Construction Standard Attachment-3.
Revision Number : 0
Page : 4 / 6
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200
Pipes & Tubes

P5 PAATFQZPEEX 0F3K 0H3K 1A3K 1F3K
P15 PAATFQZBEEX 2A3G 3A3G 4A3G 6A3G 8A3F
Gate Valves
VG30 VHBJDEFBEAPEDRZZ 0F3K 0H3K 1A3K 1F3K
VG35 VXBHAMFBEBFEDRZZ 2A3G 3A3G 4A3G 6A3G 8A3F
VG40 VHBJDEFBEAKEDRZZ 0F3K 0H3K 1A3K 1F3K
VG45 VXBHAMFBEAJEDRZZ 2A3G 3A3G 4A3G 6A3G 8A3F
Flanges
F305 FEALDEFRF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A
F330 FLALDEFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
BW Fittings
B405 NBAFLEBEAJ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B415 NCAFLEBEAJ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B425 NAAFLEBEAJ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B455 NHAFLEBEAJ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B479 BJAFLEBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B480 HLAFLEBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
B485 HMAFLEBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G 6A3G 8A3F
Forged Fittings
O520 NAACDEMTF ZZ0F ZZ0H ZZ1A ZZ1F
Gaskets
G600 GAANDUFRFDN 0F0C 0H0C 1A0C 1F0C 2A0C 3A0C 4A0C 6A0C 8A0C
D705 FAAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A
D720 FBAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A
D735 FCAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A
Revision Number : 0
Page : 5 / 6
Reducing Component
20 x 15 NEAFLEBEAJ0H3K0F3K NFAFLEBEAJ0H3K0F3K NJAFLEBEAJ0H3K0F3K

25 x 15 NEAFLEBEAJ1A3K0F3K NFAFLEBEAJ1A3K0F3K NJAFLEBEAJ1A3K0F3K
25 x 20 NEAFLEBEAJ1A3K0H3K NFAFLEBEAJ1A3K0H3K NJAFLEBEAJ1A3K0H3K
40 x 15 NEAFLEBEAJ1F3K0F3K NFAFLEBEAJ1F3K0F3K NMAGDEFRFZZ1F0F3K NNAGDETMCF1F3K0F3K
40 x 20 NEAFLEBEAJ1F3K0H3K NFAFLEBEAJ1F3K0H3K NJAFLEBEAJ1F3K0H3K
40 x 25 NEAFLEBEAJ1F3K1A3K NFAFLEBEAJ1F3K1A3K NJAFLEBEAJ1F3K1A3K
50 x 15 NMAGDEFRFZZ2A0F3K NNAGDETMCF2A3G0F3K
50 x 20 NEAFLEBEAJ2A3G0H3K NFAFLEBEAJ2A3G0H3K NMAGDEFRFZZ2A0H3K NNAGDETMCF2A3G0H3K
50 x 25 NEAFLEBEAJ2A3G1A3K NFAFLEBEAJ2A3G1A3K NJAFLEBEAJ2A3G1A3K
50 x 40 NEAFLEBEAJ2A3G1F3K NFAFLEBEAJ2A3G1F3K NJAFLEBEAJ2A3G1F3K
80 x 20 NMAGDEFRFZZ3A0H3K NNAGDETMCF3A3G0H3K
80 x 25 NMAGDEFRFZZ3A1A3K NNAGDETMCF3A3G1A3K
80 x 40 NEAFLEBEAJ3A3G1F3K NFAFLEBEAJ3A3G1F3K NMAGDEFRFZZ3A1F3K NNAGDETMCF3A3G1F3K
80 x 50 NEAFLEBEAJ3A3G2A3G NFAFLEBEAJ3A3G2A3G NJAFLEBEAJ3A3G2A3G
100 x 40 NEAFLEBEAJ4A3G1F3K NFAFLEBEAJ4A3G1F3K NMAGDEFRFZZ4A1F3K NNAGDETMCF4A3G1F3K
150 x 50 NKAGDEBEAK6A3G2A3G
200 x 15 NMAGDEFRFZZ8A0F3K NNAGDETMCF8A3F0F3K
200 x 20 NMAGDEFRFZZ8A0H3K NNAGDETMCF8A3F0H3K
200 x 25 NMAGDEFRFZZ8A1A3K NNAGDETMCF8A3F1A3K
200 x 40 NMAGDEFRFZZ8A1F3K NNAGDETMCF8A3F1F3K
200 x 50 NKAGDEBEAK8A3F2A3G
200 x 80 NKAGDEBEAK8A3F3A3G
200 x 100 NEAFLEBEAJ8A3F4A3G NFAFLEBEAJ8A3F4A3G NJAFLEBEAJ8A3F4A3G
200 x 150 NEAFLEBEAJ8A3F6A3G NFAFLEBEAJ8A3F6A3G NJAFLEBEAJ8A3F6A3G
Revision Number : 0
Page : 6 / 6
BLT FOR BLIND/SPACER

15 4 1/2 x 80 BAAAADZZ0F0S
20 4 5/8 x 90 BAAAADZZ0G0U
40 4 3/4 x 110 BAAAADZZ0H1C
50 8 5/8 x 100 BAAAADZZ0G1A
80 8 3/4 x 130 BAAAADZZ0H1G
100 8 3/4 x 130 BAAAADZZ0H1G
150 12 3/4 x 150 BAAAADZZ0H1L
200 12 7/8 x 170 BAAAADZZ0J1Q
BLT FOR STD FLG

15 4 1/2 x 70 BAAAADZZ0F0Q
20 4 5/8 x 80 BAAAADZZ0G0S
25 4 5/8 x 80 BAAAADZZ0G0S
40 4 3/4 x 100 BAAAADZZ0H1A
80 8 3/4 x 110 BAAAADZZ0H1C
100 8 3/4 x 120 BAAAADZZ0H1E
150 12 3/4 x 130 BAAAADZZ0H1G
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 3 - ASSEMBLY DETAILS FOR SCOPE 1
Open
APPENDIX 3
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT (N-OSBL)
ASSEMBLY DETAILS FOR SCOPE 1
TABLE A - VENTS & DRAINS CONNECTIONS

Branch DN 15 Branch DN 20 Branch DN 25 Branch DN 40 Branch DN 50
# PIPING CLASS
Header DN 80- Header DN 350- Header DN 50-
Header DN 15 Header DN 15-25 Header DN 20-40 Header DN 40-50 Header DN 50 Header DN 25-50 Header DN 80-300
Largest Size Largest Size Largest Size
1 1C101DF - - - - - - - Fig.J - -
2 1C108DF Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
3 1C108DG Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
5 1C119DF-20 Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
7 1C136DH - - - - - - - - - -
8 1C136DG Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
10 1G100DF - Fig. A - Fig. A - - Fig. A - - -
11 1G304 - - - - - Fig. H Fig. H - - -
12 1N103DF - - - - - - - - - -
13 1S105DF Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
14 3C102DF-KS - - - - - - - Fig.J - -
Seal weld
J
Fig. A: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded cap
Fig. I: Butt weld end branch connection in accordance with the branch table, weld neck flange, blind flange
Fig H: Flanged branch connection in accordance with the branch table (e.g. branch nipple flanged), blind flange
Fig J: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded cap. Seal weld after hydro test.
J
Seal weld
Electronic Filename: App 3 Assembly Details_3_Scope 1__ 1 of 6

APPENDIX 3
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY LIMIT
(N-OSBL) FACILITY PROJECT FOR PENGERANG INTEGRATED COMPLEX
TABLE B - PRESSURE INSTRUMENT, METER RUN & ORIFICE CONNECTIONS (REMOTE MOUNTING)
Meter Run DN 15 Orifice DN 15 Pressure Instrument DN 15 Pressure Instr. DN
# PIPING CLASS
Header DN 50/80- Header DN 15- Header DN 40- Header DN 80- 50 (Header DN 50-
Header DN 15-40 Header DN 15-25 Header DN 15-50 350)
Largest Size Largest Size Largest Size Largest Size
1 1C101DF - - - - - - - -
2 1C108DF Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
3 1C108DG Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
5 1C119DF-20 Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
7 1C136DH - - - - - - - -
8 1C136DG Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
10 1G100DF - Fig. 6C - Fig. 6C - - Fig. 6D -
11 1G304 - - - - - - - -
12 1N103DF - - - - - - - -
13 1S105DF Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
14 3C102DF-KS - Fig. 0M - - Fig. 0N - - -

APPENDIX 3
For Meter Run
Fig. 0H: Branch n/a, flanged gate valves, lap joint flanges
Fig. 2H: Branch n/a, flanged reduced bore ball valves, lap joint flanges
Fig. 3H: Branch n/a, flanged full bore ball valves, lap joint flanges
Fig. 0I: Branch n/a, BW gate valves, welding neck flanges, lap joint flanges
For Orifice
Fig. 0I: Branch n/a, welding neck flanges, flanged gate valves, lap joint flanges
Fig. 2I: Branch n/a, welding neck flanges, flanged reduced bore ball valves, lap joint flanges
Fig. 3I: Branch n/a, welding neck flanges, flanged full bore ball valves, lap joint flanges
Fig. 0M: Branch n/a, BW gate valves, welding neck flanges, lap joint flanges
Fig. 6C: Branch n/a, threaded ball valves, pipe nipples threaded ends, threaded flanges, lap joint flanges
(The pipe nipple attached to the orifice flange per PTS standard drawing D12.92.343-F shall be threaded
at site to facilitate the connection with the threaded ball valve.)
For Pressure Instrument
Fig. 6C: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded ball valve, threaded flange, lap
joint flange
Fig. 6D: Threaded end branch connection in accordance with the branch table, threaded ball valve, pipe nipple threaded ends, threaded flange, lap
joint flange
Fig. 0H: Branch nipple flanged, flanged gate valve, lap joint flange
Fig. 2H: Branch nipple flanged, flanged reduced bore ball valve, lap joint flange
Fig. 3H: Branch nipple flanged, flanged full bore ball valve, lap joint flange
Fig. 0J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged gate valve, lap joint flange
Fig. 2J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged reduced bore ball valve, lap joint
flange
Fig. 3J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged full bore ball valve, lap joint flange
Fig. 0N: Butt weld end branch connection in accordance with the branch table, pipe, BW gate valve, welding neck flange, lap joint flange

APPENDIX 3
TABLE C - PRESSURE INSTRUMENT, METER RUN & ORIFICE CONNECTIONS (DIRECT MOUNTING)
Meter Run DN 15 Orifice DN 15 Pressure Instrument DN 15 Pressure Instr. DN
# PIPING CLASS
Header DN 50- Header DN 15- Header DN 40- Header DN 80- 50 (Header DN 50-
Header DN 15-40 Header DN 15-25 Header DN 15-50
Largest Size Largest Size Largest Size Largest Size 350)
1 1C101DF - - - - - - - -
2 1C108DF Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
3 1C108DG Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
5 1C119DF-20 Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
7 1C136DH - - - - - - - -
8 1C136DG Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
10 1G100DF - - - Fig. 6E - - Fig. 6F -
11 1G304 - - - - - - - -
12 1N103DF - - - - - - - -
13 1S105DF Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
14 3C102DF-KS - Fig. 0N - - Fig. 0Q - - -

APPENDIX 3
For Meter Run
Fig. 0G: Branch n/a, flanged gate valves

Fig. 2G: Branch n/a, flanged reduced bore ball valves
Fig. 3G: Branch n/a, flanged full bore ball valves
Fig. 0J: Branch n/a, BW gate valves, welding neck flanges
For Orifice
Fig. 0J: Branch n/a, welding neck flanges, flanged gate valves
Fig. 2J: Branch n/a, welding neck flanges, flanged reduced bore ball valves
Fig. 3J: Branch n/a, welding neck flanges, flanged full bore ball valves
Fig. 0N: Branch n/a, BW gate valves, welding neck flanges
Fig. 6E: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded ball valve, threaded flange
Fig. 6F: Threaded end branch connection in accordance with the branch table, threaded ball valve, pipe nipple threaded ends, threaded flange
Fig. 0G: Branch nipple flanged, flanged gate valve

Fig. 2G: Branch nipple flanged, flanged reduced bore ball valve
Fig. 3G: Branch nipple flanged, flanged full bore ball valve
Fig. 0K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged gate valve
Fig. 2K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged reduced bore ball valve
Fig. 3K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged full bore ball valve
Fig. 0Q: Butt weld end branch connection in accordance with the branch table, pipe, BW gate valve, welding neck flange

APPENDIX 3
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF TITANIUM NBL OUTSIDE BATTERY
LIMIT
TABLE D - TEMPERATURE INSTRUMENT CONNECTIONS

Temperature Instrument DN 40 Temperature Instrument DN 50
# PIPING CLASS
Header Header Header DN 350- Header Header DN 350-
DN 80-100 DN 150-300 Largest Size DN 150-300 Largest Size
1 1C101DF - - - - -
2 1C108DF Fig. NS Fig. NL Fig. NZ - -
3 1C108DG Fig. NS Fig. NL Fig. NZ - -
4 1C114DF Fig. NS Fig. NL Fig. NZ - -
5 1C119DF-20 Fig. NS Fig. NL Fig. NZ - -
6 1C136DF Fig. NS Fig. NL Fig. NZ Fig. NS -
7 1C136DH - - - - -
8 1C136DG Fig. NS Fig. NL Fig. NZ - -
9 1C139DF Fig. NS Fig. NL Fig. NZ - Fig. NZ
10 1G100DF - - - - -
11 1G304 - - - - -
12 1N103DF - - - - -
13 1S105DF Fig. NS Fig. NL Fig. NZ - -
14 3C102DF-KS Fig. NS Fig. NL - - -
NOTE: Refer to thermowell datasheets for actual thermowell length (L).

OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 4 - PIPING CLASS INDEX SUMMARY FOR SCOPE 2
Open
Appendix 3

VALVES
Limitation VALVE
Design Condition SIZE GATE GLOBE CHECK BALL BUTTERFLY CATEGORY A BUTTERFLY CATEGORY B
Reference Pipe Class Fluid Fluid Temp. ASME Class Corr. FUGITIVE MODIFICATION FROM EXISTING
No Scope Fluid Base Material Sour PWHT (DN) PIPE FITTING FLANGE GASKET BOLT COAT Remarks
Pipe Class Rev.B Code Category Pressure (Min./Max) Rating Allowance EMISSION RAPID PIPE CLASS (P16A)
Temp [°C] MAX. Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM
[barg] [°C] CLASS
1. ERW pipe shall not be used Additional Requirement:

changed to SMLS pipe. 1. Flange spray shields shall be
DN15-DN150, A106 Gr.B DN15-DN150, DN15-DN150, ≤150 Floating
1 P16A 1C103EA 1C103EE Causetic Soda CCS M 150 15.8 0/150 150 A106 Gr.B NO 3.0 YES 150 DN15-DN150, SPW TYPE-2 Rate A N/A N/A N/A N/A (<50) Piston Check AISI 316/STELLITE 6 AISI 316/PTFE N/A N/A N/A N/A 2. Notes that applies the used of provided to all flanged connections.
SMLS BW WN Ball
ERW pipe is removed. 2. Spades & spacer rings shall be used
3. Size range changed. instead of spectacle blinds
1. ERW pipe shall not be used

changed to SMLS pipe.
DN15-DN100, A106 Gr.B DN15-DN100, DN15-DN100, (<50) AISI 316/STELLITE 6
2 P16A 1C108EA 1C108EE Plant Air PA Normal 100 17.7 -20/100 150 A106 Gr.B NO 1.0 NO 100 DN15-DN100, SPW TYPE-2 Rate B N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 2. Notes that applies the used of
SMLS BW WN (≤100) AISI 410/STELLITE 6
ERW pipe is removed.
3. Size range changed.
DN15-DN100, A106 Gr.B DN15-DN100, DN15-DN100, (<50) AISI 316/STELLITE 6
3 P16A 1C108EA 1C108EE LP Nitrogen LPN Normal 100 17.7 -20/100 150 A106 Gr.B NO 1.0 NO 100 DN15-DN100, SPW TYPE-2 Rate B N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 2. Notes that applies the used of
SMLS BW WN (≤100) AISI 410/STELLITE 6
DN15-DN200, A106 Gr.B DN15-DN200, DN15-DN200, (<50) AISI 316/STELLITE 6 (<50) Piston check AISI 316/STELLITE 6 ≤80 Floating
4 P16A 1C114EA 1C114EE Light Slop Oil LSO Normal 100 17.7 -20/100 150 A106 Gr.B NO 3.0 NO 200 DN15-DN200, SPW TYPE-2 Rate B N/A N/A AISI 316/PTFE N/A N/A N/A N/A 2. Notes that applies the used of
SMLS BW WN (≤100) AISI 410/STELLITE 6 (≤100) Swing Check AISI 410/STELLITE 6 Ball
1. ERW pipe shall not be used Additional Requirement:

changed to SMLS pipe. 1. Flange spray shields shall be
Sulphuric Acid DN15-DN150, A106 Gr.B DN15-DN150, DN15-DN150, (<50) Piston check ALLOY 20 ≤150 Floating ALLOY
5 P16A 1C127EA 1C127EE SA M 80 18.4 -20/80 150 A106 Gr.B NO 3.0 NO 250 DN15-DN150, SPW TYPE-2 Rate A N/A N/A N/A N/A N/A N/A N/A N/A 2. Notes that applies the used of provided to all flanged connections.
98% SMLS BW WN (≤100) Swing Check Ball 20/PTFE
ERW pipe is removed. 2. Spades & spacer rings shall be used
3. Size range changed. instead of spectacle blinds
DN15-DN600, A106 Gr.B DN15-DN900, 1. ERW pipe shall not be used

(<50) Piston Check AL BRONZE
A106 Gr.B SMLS WN DN15-DN600, SPW AISI 316/STELLITE 6 changed to SMLS pipe.
DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM
6 P16A 1C136EA 1C136EE Service Water SW Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI
CL.22 Gr.C65 CL.22, DSAW, series A > camprofile AISI 410/STELLITE 6 ERW pipe is removed.
Dual Pl. 316/EPDM
Straight seam DN600 3. Size range changed.
7 P16A 1C136EA 1C136EE Treated Water WT Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Dual Pl. 316/EPDM
Process Waste DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM
8 P16A 1C136EA 1C136EE PWN Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Water BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI
Dual Pl. 316/EPDM
9 P16A 1C136EA 1C136EE Teated Effluent TWE Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Dual Pl. 316/EPDM
Accidentally (<50) Piston Check AL BRONZE
Chemically DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM
10 P16A 1C136EA 1C136EE ACC Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Contaminated BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI
Waste Water Dual Pl. 316/EPDM
11 P16A 1C136EA 1C136EE Vent Gas VL Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Dual Pl. 316/EPDM
DN15-DN600, A106 Gr.B DN15-DN900,
(<50) Piston Check AL BRONZE 1. ERW pipe shall not be used
A106 Gr.B SMLS WN DN15-DN600, SPW AISI 316/STELLITE 6
DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM changed to SMLS pipe.
12 P16A 1C136EA 1C136EE Supernatant SUP Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A
BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI 2. Notes that applies the used of
CL.22 Gr.C65 CL.22, DSAW, series A > camprofile AISI 410/STELLITE 6
Dual Pl. 316/EPDM ERW pipe is removed.
Straight seam DN600
DN15-DN600, A106 Gr.B DN15-DN900,
Chilled Water CHW DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM changed to SMLS pipe.
13 P16A 1C136EA 1C136EE Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A
Supply S BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI 2. Notes that applies the used of
Straight seam DN600
DN15-DN600, A106 Gr.B DN15-DN900,
Chilled Water CHW DN15-DN900, (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM changed to SMLS pipe.
14 P16A 1C136EA 1C136EE Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 ASME B16.47 DN750-DN900, TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A
Return R BW (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI 2. Notes that applies the used of
Straight seam DN600
DN15-DN900, DN15-DN600, SPW
DN15-DN600, A106 Gr.B 1. ERW pipe shall not be used
WN DN750-DN900, (<50) Piston Check AL BRONZE
A106 Gr.B SMLS AISI 316/STELLITE 6 changed to SMLS pipe.
Firewater DN15-DN900, ASME B16.47 camprofile (<50) AISI 316/STELLITE 6 (<50) AISI 316/STELLITE 6 (50-250) Swing Check 150 (FF) EPDM
15 P16A 1C136EA 1C136EE FW Normal 100 17.7 0/100 150 A672 Gr.C65 NO 3.0 NO 900 DN 750-DN900, A672 TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A 2. Notes that applies the used of
Aboveground BW series A > DN150 (50) AISI 410/STELLITE 6 (≤200) AISI 410/STELLITE 6 (300-600) Lug Check ≤900 (RF) AISI
CL.22 Gr.C65 CL.22, DSAW, AISI 410/STELLITE 6 ERW pipe is removed.
DN600 Non Metal. Flat Dual Pl. 316/EPDM
Straight seam 3. Size range changed.
Gasket (EPDM)
Sludge DN15-DN800, A106 Gr.B DN15-DN600, 1. PE coated CS piping to be used for

A106 Gr.B (PE DN15-DN800, 1. ERW pipe shall not be used
(Underground SMLS (PE coated) SPW/Non Metal. (<50) underground firewater branching for
coated) WN AISI 316/STELLITE 6 changed to SMLS pipe.
EWS & CS EWS DN 750-DN900, A672 DN15-DN800, Flat Gasket (EPDM) (50) hydrant.
16 P16A 1C136EB 1C136EF Normal 90 16.0 0/100 150 A672 Gr.C65 NO 3.0 NO 800 ASME B16.47 TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 2. Notes that applies the used of
Pipes ) / FW Gr.C65 CL.22, SAW, BW DN750-DN800, (80-350) Knife 2. For Sludge underground EWS
CL.22 (PE series A > AISI 410/STELLITE 6 ERW pipe is removed.
Firewater Straight seam (PE Non Metal. Flat Gate service, piping is CS PE coated with
coated) DN600 3. Size range changed.
Underground coated) Gasket (EPDM) RCC encasement.

(<50)
AISI 316/STELLITE 6 changed to SMLS pipe.
DN15-DN400, A106 Gr.B DN15-DN400, DN15-DN400, (50) (50-250) Swing Check AISI 410/STELLITE 6
17 P16A 1C136ED 1C136EG Sludge EWS Normal 100 17.7 0/100 150 A106 Gr.B NO 3.0 NO 400 DN15-DN400, SPW TYPE-2 Rate B AISI 410/STELLITE 6 N/A N/A N/A N/A N/A N/A N/A N/A 2. Notes that applies the used of
SMLS BW WN (80-350) Knife (300) Lug Check Dual Pl. AISI 410/STELLITE 6
AISI 410/STELLITE 6 ERW pipe is removed.
Gate
1. ERW pipe shall not be used 1. Fugitive emission class for soft seat
DN15-DN50, DN15-DN50, butterfly valve is not applicable for
(<50) Piston Check AL changed to SMLS pipe.
API 5L Gr.B DN15-DN150, A106 Gr.B SCRD SCRD AL BRONZE ≤50 Floating AL
18 P16A 1G100EA 1G100EE Potable Water WP Normal 90 16 0/90 150 NO 0.0 NO 150 DN15-DN150, SPW TYPE-2 Rate B N/A N/A ≤80 AL BRONZE (80-100) Lug Check Dual 80-150 BRONZE/EPD N/A N/A 2. Notes that applies the used of water service application .
Galv. SMLS Galv. DN80-DN150, DN80-DN150, AL BRONZE Ball BRONZE/PTFE
Pl. M ERW pipe is removed.
BW WN
Page 1 of 2
Appendix 3

VALVES
Limitation VALVE
Design Condition SIZE GATE GLOBE CHECK BALL BUTTERFLY CATEGORY A BUTTERFLY CATEGORY B
Reference Pipe Class Fluid Fluid Temp. ASME Class Corr. FUGITIVE MODIFICATION FROM EXISTING
No Scope Fluid Base Material Sour PWHT (DN) PIPE FITTING FLANGE GASKET BOLT COAT Remarks
Pipe Class Rev.B Code Category Pressure (Min./Max) Rating Allowance EMISSION RAPID PIPE CLASS (P16A)
Temp [°C] MAX. Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM Size (DN) TRIM
[barg] [°C] CLASS
API 5L Gr.B DN15-DN50, API 5L Gr.B DN15-DN50, DN15-DN50,
(<50) Piston Check changed to SMLS pipe.
Galv. ≤ DN50 0.0 ≤ DN50 SMLS Galv. SCRD SCRD RF AL BRONZE ≤50 Floating AL AISI
19 P16A 1G336 1G340 Instrument Air IA Normal 90 16 0/90 150 NO NO 100 DN15-DN100, SPW TYPE-2 Rate B N/A N/A ≤50 AL BRONZE (80-100) Lug Check Dual 80-100 N/A N/A 2. Notes that applies the used of
API 5L Gr.B > 1.0 > DN50 DN80-DN100, API 5L DN80-DN100, DN80-DN100, AISI 410/STELLITE 6 Ball BRONZE/PTFE 316/EPDM
Pl. ERW pipe is removed.
DN50 Gr.B SMLS BW WN RF
1. Valves with UL/FM certification shall
be used where required (i.e. fire water
DN50-500, service or when indicated in P&ID).
DN50-500, Non AL
Fire Water GRVE, DN50-DN500, GRVE DN50-DN500, Butt and 2. Fugitive emission class for soft seat
20 P16A 1N103EA 1N103EE FW Normal 75 16 0/75 150 NO 0.0 NO 500 Metal. Flat Gasket TYPE-2 N/A N/A N/A N/A N/A N/A N/A N/A N/A 200-500 BRONZE/EPD N/A N/A 1.. Size range changed.
(Underground) Bisphenol-A Bisphenol-A Butt and strap strap butterfly valve is not applicable for
(EPDM) M
water service application.
DN15-DN150, Non
DN15-DN150, DN15-DN150,
21 P16A 1N331 1N341 Flocculant FLO Normal 60 10 -5/60 PN10 C-PVC NO 0.0 NO 150 DN15-DN150,PVC-C Metal. Flat Gasket TYPE-2 Rate B N/A N/A N/A N/A N/A N/A ≤100 PVC-C N/A N/A N/A N/A 1.. Size range changed.
Socket Socket
(EPDM)
DN15-DN150, Non
Coagulant- DN15-DN150, DN15-DN150,
22 P16A 1N331 1N341 COR Normal 60 10 -5/60 PN10 C-PVC NO 0.0 NO 150 DN15-DN150,PVC-C Metal. Flat Gasket TYPE-2 Rate B N/A N/A N/A N/A N/A N/A ≤100 PVC-C N/A N/A N/A N/A 1.. Size range changed.
Feso4 Socket Socket
(EPDM)
DN15-DN150, Non
DN15-DN150, DN15-DN150,
23 P16A 1N331 1N341 Nutrient NUT Normal 60 10 -5/60 PN10 C-PVC NO 0.0 NO 150 DN15-DN150,PVC-C Metal. Flat Gasket TYPE-2 Rate B N/A N/A N/A N/A N/A N/A ≤100 PVC-C N/A N/A N/A N/A 1.. Size range changed.
Socket Socket
(EPDM)
DN15-DN300, A312
DN15-DN300, DN15-DN300, (<50) Piston Check AISI 316/STELLITE 6 SS/DUPLEX/ST
24 P16A 1S338 1S341 Process Air PRA Normal 200 13.7 -20/200 150 SS 316/316L NO 0.0 NO 300 Gr.TP316L SMLS DN15-DN300, SPW TYPE-2 Rate B ≤50 AISI 316/STELLITE 6 N/A N/A N/A N/A 80-300 N/A N/A 1.. Size range changed.
BW WN (50-300) Swing Check AISI 316/STELLITE 6 ELLITE
DN15-DN80, A312
Hydrogen A312 Gr. DN15-DN80, (<50) Piston Check AISI 316/STELLITE 6 ≤80 Floating 1. New service for hydrogen 1. Ball valve with cavity pressure relief
25 P16A 1S339 1S342 H202 Normal 100 16.2 -20/100 150 NO 0.0 NO 80 Gr.TP316L SMLS DN15-DN80, BW DN15-DN80, SPW TYPE-2 Rate A N/A N/A N/A N/A AISI 316/PTFE N/A N/A N/A N/A
Peroxide TP316/TP316L WN (50-80) Swing Check AISI 316/STELLITE 6 Ball Peroxide provision.
Page 2 of 2
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 5 - PIPE CLASS DETAIL FOR SCOPE 2
Open
P_NOSBL
1C103EE
Killed Carbon Steel, PWHT,Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C103EE
Revision Number : 0
Page : 2 / 5

TYPE OF MATERIAL : Carbon Steel F-Gr PWHT
Temperature (oC) 0 50 75 100 125 150
Pressure (barG)
DN 15 to 150 19.6 19.2 18.4 17.7 16.7 15.8
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150
Schedule S-160 S-160 S-160 S-160 S-80 S-80 S-40 S-40

Pipes & Tubes
P15 15 - 40 / - Pipe Nipple, ASME B36.10M, PE, ASTM A106-B, 75mm Long, Seamless PPNABQPGACRACAZ
P25 15 - 40 / - Pipe Nipple, ASME B36.10M, PE x MTE, ASTM A106-B, 100mm Long, Seamless PPNABQPMACRACBZ
P35 15 - 40 / - Pipe Nipple, ASME B36.10M, PE, ASTM A106-B, 150mm Long, Seamless PPNABQPGACRACCZ
Ball Valves
VB105 15 - 40 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBTA1AKDRF8CA1BUBBPGABZ
Lever , ASTM A105 Normalised, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, PWHT
VB107 50 - 100 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBTA1AKDRF8CACDBBPGABZ
A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, PWHT
VB112 150 - 150 / - Ball Vlv SP RB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBUA1AKDRF8CACDBBPGABZ
A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, PWHT
Check Valves
VC126 15 - 40 / - Piston Chk Vlv RB , API 602 , CL 150, RF , Bltd Bonnet , ASTM A105 Normalised , AISI VC1BAA5DRFAA1BUBBDGCHZ
2H Nuts , PWHT
Flanges
F326 15 - 150 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A105, With Jack Screws FWNABLDRFACGDABZ
F330 50 - 80 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 600, RFFE , ASTM A105, FO2ABDLRFACGZZZZ
F335 100 - 150 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 300, RFFE , ASTM A105, FO2ABDIRFACGZZZZ
BW Fittings
Forged Fittings
O510 40 - 150 / 15 - 40 Nippolet, MSS SP-97, BE , ASTM A105- O1ABAM9BEACGZZZZ
Gaskets
G605 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 150, RF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7DRFA1DUGLWZ
mm
G615 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 300, RF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7IRFA1DUGLWZ
mm
G620 50 - 80 / - Non Metal Flat Gskt, ASME B16.21, CL 600, RF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7LRFA1DUGLWZ
mm
Bolts & Nuts
L655 15 - 22 / - Stud Bolt, ASME-B18.2.1/B18.2.2 , ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts, LS1A4GAA1ANAAEZ
Coated
D730 50 - 50 / - Drip Ring, Manufacturer's Standard, CL 150, RFFE , ASTM A105 Normalised DDRA1CDRFA1BUZZZZ
Miscellaneous Piping
MP905 50 - 80 / - Y-Strainer, CL 150, BE , ASTM A106-B, 3 mm CA, Sieve: AISI 316, RF Branch-end MPSYAZZDBEZZACRBAAJ
Revision Number : 0
Page : 3 / 5

Legend and chart
Branch Table: CLASS1C103EE_BRF Legend:

150 T E Red. Tee
100 E T T Equal Tee
80 E E T W Weldolet
50 W E E T
40 A A A E T
25 A A A E E T
20 A A A A E E T
15 A A A A A E E T
150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
04 HDPE Piping shall consider protection to ultraviolet
05 For basis of design see PTS 31.38.01.10.
14 Welds attachment welds and cold formed piping parts shall be post-weld heat treated; see PTS 30.10.60.18. and PTS 31.38.01.31.
104 All welds to be 100% radiographed.
Revision Number : 0
Page : 4 / 5
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150
Pipes & Tubes

P10 PAATFPZBEEX 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
P15 PNATFPZPEEA 0F3Q 0H3Q 1A3Q 1F3Q
P25 PNATFPZTPEB 0F3Q 0H3Q 1A3Q 1F3Q
P35 PNATFPZPEEC 0F3Q 0H3Q 1A3Q 1F3Q
Ball Valves
VB105 VWAWCBERFAZCDK JT0F JT0H JT1A JT1F
VB107 VWAWBKERFAZCDK JT2A JT3A JT4A
VB112 VGAWBKERFAZCDK JT6A
Check Valves
VC126 LKBECBERFAJRB KW0F KW0H KW1A KW1F
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A
F325 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F326 FLALDCERFCG 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F327 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F330 FGAJDCGRFZZ 2A3K 3A3K
F335 FGAJDCFRFZZ 4A3G 6A3G
BW Fittings
B405 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B410 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B415 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B430 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
Gaskets
G605 GCARDZERFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
G615 GCARDZFRFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
G620 GCARDZGRFNU 2A0L 3A0L
D710 FAAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A
D720 FBAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A
D730 WRAJCBERF ZZ2A
Miscellaneous Piping
MP905 PBZZKSEBEZFT 2A3K 3A3K
Revision Number : 0
Page : 5 / 5
Reducing Component

40 x 15 NEAFKRBEAN1F3Q0F3Q NFAFKRBEAN1F3Q0F3Q NMAGDCERFZZ1F0F3Q NNAGDCBEZZ1F3Q0F3Q
50 x 15 NMAGDCERFZZ2A0F3Q NNAGDCBEZZ2A3K0F3Q
50 x 20 NEAFKRBEAN2A3K0H3Q NFAFKRBEAN2A3K0H3Q NMAGDCERFZZ2A0H3Q NNAGDCBEZZ2A3K0H3Q
80 x 20 NMAGDCERFZZ3A0H3Q NNAGDCBEZZ3A3K0H3Q
80 x 25 NMAGDCERFZZ3A1A3Q NNAGDCBEZZ3A3K1A3Q
80 x 40 NEAFKRBEAN3A3K1F3Q NFAFKRBEAN3A3K1F3Q NMAGDCERFZZ3A1F3Q NNAGDCBEZZ3A3K1F3Q
100 x 15 NMAGDCERFZZ4A0F3Q NNAGDCBEZZ4A3G0F3Q
100 x 20 NMAGDCERFZZ4A0H3Q NNAGDCBEZZ4A3G0H3Q
100 x 25 NMAGDCERFZZ4A1A3Q NNAGDCBEZZ4A3G1A3Q
100 x 40 NEAFKRBEAN4A3G1F3Q NFAFKRBEAN4A3G1F3Q NMAGDCERFZZ4A1F3Q NNAGDCBEZZ4A3G1F3Q
150 x 50 NKAGDCBEZZ6A3G2A3K
BLT FOR CT BLD SPC BLT FOR CT STD FLG

15 4 1/2 x 80 BAACAAAB0F0S 15 4 1/2 x 70 BAACAAAB0F0Q

25 4 1/2 x 90 BAACAAAB0F0U 25 4 1/2 x 80 BAACAAAB0F0S
50 4 5/8 x 100 BAACAAAB0G1A 50 4 5/8 x 90 BAACAAAB0G0U
80 4 5/8 x 110 BAACAAAB0G1C 80 4 5/8 x 100 BAACAAAB0G1A
100 8 5/8 x 120 BAACAAAB0G1E 100 8 5/8 x 100 BAACAAAB0G1A
150 8 3/4 x 130 BAACAAAB0H1G 150 8 3/4 x 110 BAACAAAB0H1C
250 12 7/8 x 140 BAACAAAB0J1J 250 12 7/8 x 120 BAACAAAB0J1E
300 12 7/8 x 150 BAACAAAB0J1L 300 12 7/8 x 120 BAACAAAB0J1E
P_NOSBL
1C108EE
Killed Carbon Steel, Class 150
Revision: 0
Issue Date : Apr 08, 2022
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 5

TYPE OF MATERIAL : Carbon steel, killed
Temperature (oC) -20 0 50 100
Pressure (barG)
DN 15 to 100 19.6 19.6 19.2 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100

Pipes & Tubes
P35 15 - 40 / - Pipe Nipple, ASME B36.10M, PE , ASTM A106-B, 75mm Long, Seamless PPNABQPGACRACAZ
P40 15 - 40 / - Pipe Nipple, ASME B36.10M, PE x MTE , ASTM A106-B, 75mm Long, Seamless PPNABQPMACRACAZ
P45 15 - 40 / - Pipe Nipple, ASME B36.10M, PE x MTE , ASTM A106-B, 100mm Long, Seamless PPNABQPMACRACBZ
P50 15 - 40 / - Pipe Nipple, ASME B36.10M, PE , ASTM A106-B, 100mm Long, Seamless PPNABQPGACRACBZ
P55 15 - 40 / - Pipe Nipple, ASME B36.10M, PE , ASTM A106-B, 150mm Long, Seamless PPNABQPGACRACCZ
P60 15 - 40 / - Pipe Nipple, ASME B36.10M, PE x MTE , ASTM A106-B, 150mm Long, Seamless PPNABQPMACRACCZ
Gate Valves
Grade 2H Nuts
Nuts
Check Valves
Nuts
Nuts
Flanges
BW Fittings
Forged Fittings
Gaskets
Bolts & Nuts
Coated
Revision Number : 0
Page : 3 / 5

Legend and chart

100 T E Red. Tee
80 E T T Equal Tee
50 E E T
40 A A E T
25 A A E E T
20 A A A E E T
15 A A A A E E T
100 80 50 40 25 20 15
RUN SIZES
NOTES:
04 For bending of pipe see PTS 31.38.01.31.
Revision Number : 0
Page : 4 / 5
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100
Pipes & Tubes

P10 PAATFPZBEEX 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
P35 PNATFPZPEEA 0F3K 0H3K 1A3K 1F3K
P40 PNATFPZTPEA 0F3K 0H3K 1A3K 1F3K
P45 PNATFPZTPEB 0F3K 0H3K 1A3K 1F3K
P50 PNATFPZPEEB 0F3K 0H3K 1A3K 1F3K
P55 PNATFPZPEEC 0F3K 0H3K 1A3K 1F3K
P60 PNATFPZTPEC 0F3K 0H3K 1A3K 1F3K
Gate Valves
VG110 VQBHBKERFAJEHR ZZ2A ZZ3A ZZ4A
Check Valves
VC120 LNBBBKERFAJHR ZZ2A ZZ3A ZZ4A
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A
F330 FLALDCERFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
F331 FLALDCERFCG 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
F332 FLALDCFRFZZ 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
BW Fittings
B405 NBAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
B415 NCAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
B425 NAAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
B450 NHAFKRBEAN 0F3K 0H3K 1A3K 1F3K 2A3G 3A3G 4A3G
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D
G620 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D
D745 FCAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A
Revision Number : 0
Page : 5 / 5
Reducing Component

40 x 15 NEAFKRBEAN1F3K0F3K NFAFKRBEAN1F3K0F3K NMAGDCERFZZ1F0F3K NNAGDCBEZZ1F3K0F3K
50 x 15 NMAGDCERFZZ2A0F3K NNAGDCBEZZ2A3G0F3K
50 x 20 NEAFKRBEAN2A3G0H3K NFAFKRBEAN2A3G0H3K NMAGDCERFZZ2A0H3K NNAGDCBEZZ2A3G0H3K
80 x 20 NMAGDCERFZZ3A0H3K NNAGDCBEZZ3A3G0H3K
80 x 25 NMAGDCERFZZ3A1A3K NNAGDCBEZZ3A3G1A3K
80 x 40 NEAFKRBEAN3A3G1F3K NFAFKRBEAN3A3G1F3K NMAGDCERFZZ3A1F3K NNAGDCBEZZ3A3G1F3K
100 x 20 NMAGDCERFZZ4A0H3K NNAGDCBEZZ4A3G0H3K
100 x 25 NMAGDCERFZZ4A1A3K NNAGDCBEZZ4A3G1A3K
100 x 40 NEAFKRBEAN4A3G1F3K NFAFKRBEAN4A3G1F3K NMAGDCERFZZ4A1F3K NNAGDCBEZZ4A3G1F3K
BLT FOR CT BLD SPC

15 4 1/2 x 80 BAACAAAB0F0S
25 4 1/2 x 90 BAACAAAB0F0U
50 4 5/8 x 100 BAACAAAB0G1A
80 4 5/8 x 110 BAACAAAB0G1C
100 8 5/8 x 120 BAACAAAB0G1E
BLT FOR CT STD FLG

15 4 1/2 x 70 BAACAAAB0F0Q
50 4 5/8 x 90 BAACAAAB0G0U
100 8 5/8 x 100 BAACAAAB0G1A
P_NOSBL
1C114EE
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 6

Pressure (barG)
DN 15 to 200 19.6 19.6 19.2 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200
Schedule S-160 S-160 S-160 S-160 S-80 S-80 S-40 S-40 S-30

Pipes & Tubes
Check Valves
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Ball Valves
VB174 80 - 80 / - Ball Vlv SP FB, ISO 17292, CL 150, RF, Floating Ball, n-ext, Integral (Non-Extended) VBTA1AKDRF7CACDBBPZZZZ
Bonnet, Lever , ASTM A216-WCB, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts
Flanges
BW Fittings
Forged Fittings
Gaskets
Bolts & Nuts
Coated
Revision Number : 0
Page : 3 / 6

Legend and chart

200 T E Red. Tee
150 E T T Equal Tee
80 W E E T
50 W W E E T
40 A A A A E T
25 A A A A E E T
20 A A A A A E E T
200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
203 DN80 Ball valve is added in this piping class due to specific process requirement for oil tank isolation. Not to be used else where.
Revision Number : 0
Page : 4 / 6
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200
Pipes & Tubes

P10 PAATFPZBEEX 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
Check Valves
VC120 LNBBBKERFAJHR ZZ2A ZZ3A ZZ4A
Gate Valves
VG132 VQBHBKERFAJEHR ZZ2A ZZ3A ZZ4A
Ball Valves
VB174 VWAWBKERFAYCDK ZZ3A
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A
F325 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
F326 FLALDCERFCG 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
F327 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
BW Fittings
B405 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
B415 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
B425 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
B450 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D
G612 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D
D765 FCAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A
D770 WRAJCBERF ZZ2A
Revision Number : 0
Page : 5 / 6
Reducing Component

200 x 15 NMAGDCERFZZ8A0F3Q NNAGDCBEZZ8A3F0F3Q
200 x 20 NMAGDCERFZZ8A0H3Q NNAGDCBEZZ8A3F0H3Q
200 x 25 NMAGDCERFZZ8A1A3Q NNAGDCBEZZ8A3F1A3Q
200 x 50 NKAGDCBEZZ8A3F2A3K
200 x 100 NEAFKRBEAN8A3F4A3G NFAFKRBEAN8A3F4A3G NJAFKRBEAN8A3F4A3G
Revision Number : 0
Page : 6 / 6
BLT FOR CT BLD SPC

100 8 5/8 x 120 BAACAAAB0G1E
150 8 3/4 x 130 BAACAAAB0H1G
200 8 3/4 x 140 BAACAAAB0H1J
BLT FOR CT STD FLG

100 8 5/8 x 100 BAACAAAB0G1A
150 8 3/4 x 110 BAACAAAB0H1C
200 8 3/4 x 120 BAACAAAB0H1E
P_NOSBL
1C127EE
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 5

Pressure (barG)
DN 15 to 150 19.6 19.2 18.7 18.4
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150

Pipes & Tubes
P30 15 - 40 / - Pipe Nipple, ASME B36.10M, PE, ASTM A106-B, 100mm Long, Seamless PPNABQPGACRACBZ
Ball Valves
VB106 15 - 40 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLEAADRF8CA1BU2BGZZZZ
Lever , ASTM A105 Normalised, Alloy 20, PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Sulphuric Acid-
VB107 50 - 150 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLA1AKDRF8CACD2ARZZZZ
Lever , ASTM A216-WCB, Alloy 20, Filled PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Sulphuric Acid
Check Valves
VC135 25 - 40 / - Piston Chk Vlv RB , API 602 , CL 150, RF , Bltd Bonnet , ASTM A105 Normalised , Alloy VC1BAA5DRFAA1BU3BFZZZZ
20 Trim, Sulphuric Acid
VC140 50 - 100 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A216-WCB , Alloy 20 Trim, VCSCBWDDRFAACD2CEZZZZ
Thermoplastic Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts,
Sulphuric Acid
Flanges
BW Fittings
B411 80 - 150 / - 45 Deg Eq Lat Tee, Manufacturer's Standard, BE , ASTM A234-WPB, Seamless BLEEA1CBEACKABAZ
B412 80 - 150 / 50 - 100 45 Deg Red Lat Tee, Manufacturer's Standard, BE , ASTM A234-WPB, Seamless BLREA1CBEACKABAZ
Forged Fittings
Gaskets
G605 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 150, RF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7DRFA1DUGLWZ
mm
G610 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 300, RF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7IRFA1DUGLWZ
mm
G615 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7DFFA1DUGLWZ
mm
G620 15 - 150 / - Non Metal Flat Gskt, ASME B16.21, CL 300, FF , Expanded PTFE, ASME B16.5, WT 3.0 GNMAB7IFFA1DUGLWZ
mm
Bolts & Nuts
Coated
Revision Number : 0
Page : 3 / 5

Legend and chart

150 LEE E Red. Tee
100 LRE LEE LEE 45 Deg Eq Lat Tee
80 LRE LRE LEE LRE 45 Deg Red Lat Tee
50 LRE LRE LRE T T Equal Tee
40 A A A E T
25 A A A E E T
20 A A A A E E T
15 A A A A A E E T
150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
20 API 5LE shall be used for application of underground conveying oil, gas and industrial water.
21 This piping class is designed for acid service; see PTS 31.38.01.11. appendix 10.
X47 Flat face flanges and full face gaskets shall only be used for mating with non-metallic flanges in vendor's package.
Revision Number : 0
Page : 4 / 5
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150
Pipes & Tubes

P10 PAATFPZBEEX 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
P30 PNATFPZPEEB 0F3Q 0H3Q 1A3Q 1F3Q
Ball Valves
VB106 VEAVATERFAZCAH ZZ0F ZZ0H ZZ1A ZZ1F
VB107 VEAWBKERFAZCAD ZZ2A ZZ3A ZZ4A ZZ6A
Check Valves
VC135 LKBECBERFAJFX ZZ1A ZZ1F
VC140 LNBBBKERFAJFB ZZ2A ZZ3A ZZ4A
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A
F310 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F311 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F312 FLALDCERFCG 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F315 FLALDCEFFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
F320 FLALDCFFFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
BW Fittings
B401 HLAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B402 HMAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B405 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B410 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G
B411 MCAJKRBEAN 3A3K 4A3G 6A3G
B413 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G
Gaskets
G605 GCARDZERFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
G610 GCARDZFRFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
G615 GCARDZEFFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
G620 GCARDZFFFNU 0F0L 0H0L 1A0L 1F0L 2A0L 3A0L 4A0L 6A0L
D710 FAAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A
D715 FBAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A
D720 WRAJCBERF ZZ2A
Revision Number : 0
Page : 5 / 5
Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Lateral Tee (45 Reducing Tee
Degree)
80 x 50 NEAFKRBEAN3A3K2A3K NFAFKRBEAN3A3K2A3K MDAJKRBEAN3A3K2A3K
100 x 50 NEAFKRBEAN4A3G2A3K NFAFKRBEAN4A3G2A3K MDAJKRBEAN4A3G2A3K
150 x 50 MDAJKRBEAN6A3G2A3K
150 x 100 NEAFKRBEAN6A3G4A3G NFAFKRBEAN6A3G4A3G MDAJKRBEAN6A3G4A3G
BLT FOR CT BLD/SPCR

100 8 5/8 x 120 BAACAAAB0G1E
150 8 3/4 x 130 BAACAAAB0H1G
BLT FOR CT STD FLG

100 8 5/8 x 100 BAACAAAB0G1A
150 8 3/4 x 110 BAACAAAB0H1C
200 8 3/4 x 110 BAACAAAB0H1C
P_NOSBL
1C136EE
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 10

Pressure (barG)
DN 15 to 900 19.6 19.2 18.4 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500 600 750 800 900
S-20 S-30 S-20 S-20 S-XS S-XS S-XS

Pipes & Tubes
P17 750 - 900 / - Pipe, ASME B36.10M, BE, ASTM A672-C65 CL22, DSAW, Straight Seam PPPABQBEA1BHAAHZ
Butterfly Valves
VY131 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, RF-, Wrench, ASTM A216-WCB, AISI 316, VYLAA4ERFZEACD1GCZZZZ
EPDM Trim, Elastomeric Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VY133 200 - 600 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, RF-, Bevel Gear Operator, ASTM A216-WCB, VYLAA4ERFZAACD1GCZZZZ
Grade 2H Nuts
VY134 750 - 900 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, RF-, Bevel Gear Operator, ASTM A216-WCB, VYLAA4ERFZAACD1GCAAHZ
Grade 2H Nuts, ASME B16.47 Sr A
VY135 150 - 150 / - Bfly Vlv Lug Type, API 609 Cat A, CL 150, FF-, Bevel Gear Operator, ASTM A536 Grade VYLAA4DFFZAA1BP1GCFARZ
ASTM A194 Grade 2H Nuts, Short Pattern/ASME B16.5, UL/FM Approved
Check Valves
Nuts
Nuts
Gate Valves
Grade 2H Nuts
Nuts
Globe Valves
Grade 2H Nuts
2H Nuts
A194 Grade 2H Nuts
Flanges
F310 750 - 900 / - Blind Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105 FBLABHDRFACGZZZZ
F317 15 - 15 / - Lap Joint Flg., ASME B16.5, CL 150, FFLF , ASTM A105, Machined FLJABLDFLACG1AAP
F330 750 - 900 / - WN Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105 FWNABHDRFACGZZZZ
F331 750 - 900 / - WN Flg., ASME B16.47 Sr A, CL 150, FF , ASTM A105 FWNABHDFFACGZZZZ
F333 750 - 900 / - WN Flg., ASME B16.47 Sr A, CL 300, RFFE , ASTM A105 FWNABHIRFACGZZZZ
F334 750 - 900 / - WN Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105, With Jack Screws FWNABHDRFACGDABZ
F335 50 - 80 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 600, RFFE , ASTM A105, FO2ABDLRFACGZZZZ
Revision Number : 0
Page : 3 / 10

Flanges
F340 100 - 600 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 300, RFFE , ASTM A105, FO2ABDIRFACGZZZZ
BW Fittings
B435 750 - 900 / 600 - 750 Con. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded BRECABMBEA1AW1AAO
B445 750 - 900 / 600 - 750 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded BREEABMBEA1AW1AAO
B455 750 - 900 / - Equal Tee, ASME B16.9, BE , ASTM A234-WPBW, Welded BTEEABMBEA1AW1AAO
B465 750 - 900 / 400 - 750 Red. Tee, ASME B16.9, BE , ASTM A234-WPBW, Welded BTERABMBEA1AW1AAO
Forged Fittings
Gaskets
G620 750 - 900 / - Gasket camprofile, BS EN 12560 Part 6, CL 300, RF, AISI 316, ASME B16.47 Series A, G1AB1ACIRFA1AX1AAH
G625 50 - 80 / - Spiral Wound Gskt, ASME B16.20, CL 600, RF , AISI 316, ASME B16.5, Graphite CS GSWABALRFA1AX1AAL
G630 15 - 900 / - Non Metal Flat Gskt, ASME B16.21, CL 150, FF , Ethylene Propylene-Diene Monomer GNMAB7DFFABV1AFP
(EPDM), ASME B16.5
Bolts & Nuts
Coated
D735 750 - 900 / - Spade, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.47 Sr. A DBPABMDRTAF11ADH
D765 750 - 900 / - Spacer ring, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, B16.47 Sr. A DBSABMDRTAF11ADH
Revision Number : 0
Page : 4 / 10

Legend and chart
Branch Table: CLASS1C136EE_BR Legend:

900 T E Red. Tee
800 E T T Equal Tee
600 E E E T
500 E E E E T
450 E E E E E T
400 W E E E E E T
350 W W W E E E E T
300 W W W E E E E E T
250 W W W W W E E E E T
200 W W W W W W W E E E T
150 W W W W W W W W E E E T
100 W W W W W W W W W E E E T
80 W W W W W W W W W W W E E T
50 W W W W W W W W W W W W E E T
40 A A A A A A A A A A A A A A E T
25 A A A A A A A A A A A A A A E E T
15 A A A A A A A A A A A A A A A A E E T
900 800 750 600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
X31 Butterfly valves UL/FM certified type to be used for firewater lines.
X32 Flat face flanges to be used for mating with firewater valves and non-metallic flanges in vendor package.
X33 EPDM rubber gasket G635 with o-ring size DN 150 to be used only for flat face flanges for firewater lines.
To be used at Hydrant and Monitor locations
Revision Number : 0
Page : 5 / 10
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 800 900
Pipes & Tubes

P10 PAATFPZBEEX 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
P17 PAATEMZBEFN 3K3S 3M3S 3R3S
Butterfly Valves
VY131 LGBVBKBRFZDQZ ZZ3A ZZ4A ZZ6A
VY133 LGBVBKBRFZBQZ ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VY134 LGBVBKBRFZBQZ AT3K AT3M AT3R
VY135 LGBVAPEFFZBQZ KY6A
Check Valves
VC144 LQBDDAERFZRC ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Gate Valves
VG164 VQBHBKERFAJEHR ZZ2A ZZ3A ZZ4A ZZ6A
Globe Valves
Flanges
F310 FEAKGUERF ZZ3K ZZ3M ZZ3R
F317 FFALDCEFLBZ 0F3Q
F320 FFALDCEFLBZ 1F3Q
F325 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F326 FLALDCEFFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F328 FLALDCERFCG 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F330 FLAKDCERFZZ 3K3S 3M3S 3R3S
F331 FLAKDCEFFZZ 3K3S 3M3S 3R3S
F332 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F333 FLAKDCFRFZZ 3K3S 3M3S 3R3S
F334 FLAKDCERFCG 3K3S 3M3S 3R3S
F335 FGAJDCGRFZZ 2A3K 3A3K
F340 FGAJDCFRFZZ 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
BW Fittings
B405 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B410 NBAFHRBEAC 3K3S 3M3S 3R3S
B415 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B420 NCAFHRBEAC 3K3S 3M3S 3R3S
B425 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E 3K3S 3M3S 3R3S
B450 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B455 NHAFHRBEAC 3K3S 3M3S 3R3S
Gaskets
G610 GAANDUERFDG 3K0C 3M0C 3R0C
G615 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
G620 GAANDUFRFDG 3K0C 3M0C 3R0C
G625 GEASDUGRFDJ 2A0D 3A0D
G630 GCARENEFFSA 0F0A 0H0A 1A0A 1F0A 2A0A 3A0A 4A0A 6A0A 8A0A 1K0A 1M0A 1P0A 1R0A 1T0A 2K0A 2P0A 3K0A 3M0A 3R0A
G635 GCARDVEFFDT 6A0G
D730 FAAMGXERT AR1P AR1R AR1T AR2K AR2P
D735 FAAMGXERT AT3K AT3M AT3R
D750 FBAMGXERT AR1P AR1R AR1T AR2K AR2P
D765 FBAMGXERT AT3K AT3M AT3R
D780 FCAMGXERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M
D785 WRAJCBERF ZZ2A
Revision Number : 0
Page : 6 / 10
Reducing Component

250 x 15 NMAGDCERFZZ1K0F3Q NNAGDCBEZZ1K3F0F3Q
250 x 20 NMAGDCERFZZ1K0H3Q NNAGDCBEZZ1K3F0H3Q
250 x 25 NMAGDCERFZZ1K1A3Q NNAGDCBEZZ1K3F1A3Q
250 x 50 NKAGDCBEZZ1K3F2A3K
250 x 100 NEAFKRBEAN1K3F4A3G NFAFKRBEAN1K3F4A3G NJAFKRBEAN1K3F4A3G
250 x 200 NEAFKRBEAN1K3F8A3F NFAFKRBEAN1K3F8A3F NJAFKRBEAN1K3F8A3F
300 x 15 NMAGDCERFZZ1M0F3Q NNAGDCBEZZ1M3F0F3Q
300 x 20 NMAGDCERFZZ1M0H3Q NNAGDCBEZZ1M3F0H3Q
300 x 25 NMAGDCERFZZ1M1A3Q NNAGDCBEZZ1M3F1A3Q
350 x 15 NMAGDCERFZZ1P0F3Q NNAGDCBEZZ1P3E0F3Q
350 x 20 NMAGDCERFZZ1P0H3Q NNAGDCBEZZ1P3E0H3Q
350 x 25 NMAGDCERFZZ1P1A3Q NNAGDCBEZZ1P3E1A3Q
Revision Number : 0
Page : 7 / 10
400 x 15 NMAGDCERFZZ1R0F3Q NNAGDCBEZZ1R3E0F3Q
400 x 20 NMAGDCERFZZ1R0H3Q NNAGDCBEZZ1R3E0H3Q
400 x 25 NMAGDCERFZZ1R1A3Q NNAGDCBEZZ1R3E1A3Q
450 x 15 NMAGDCERFZZ1T0F3Q NNAGDCBEZZ1T3F0F3Q
450 x 20 NMAGDCERFZZ1T0H3Q NNAGDCBEZZ1T3F0H3Q
450 x 25 NMAGDCERFZZ1T1A3Q NNAGDCBEZZ1T3F1A3Q
450 x 40 NMAGDCERFZZ1T1F3Q NNAGDCBEZZ1T3F1F3Q
450 x 50 NKAGDCBEZZ1T3F2A3K
450 x 80 NKAGDCBEZZ1T3F3A3K
450 x 100 NKAGDCBEZZ1T3F4A3G
450 x 150 NKAGDCBEZZ1T3F6A3G
450 x 200 NKAGDCBEZZ1T3F8A3F
450 x 250 NEAFKRBEAN1T3F1K3F NFAFKRBEAN1T3F1K3F NJAFKRBEAN1T3F1K3F
450 x 300 NEAFKRBEAN1T3F1M3F NFAFKRBEAN1T3F1M3F NJAFKRBEAN1T3F1M3F
450 x 350 NEAFKRBEAN1T3F1P3E NFAFKRBEAN1T3F1P3E NJAFKRBEAN1T3F1P3E
450 x 400 NEAFKRBEAN1T3F1R3E NFAFKRBEAN1T3F1R3E NJAFKRBEAN1T3F1R3E
500 x 15 NMAGDCERFZZ2K0F3Q NNAGDCBEZZ2K3E0F3Q
500 x 20 NMAGDCERFZZ2K0H3Q NNAGDCBEZZ2K3E0H3Q
500 x 25 NMAGDCERFZZ2K1A3Q NNAGDCBEZZ2K3E1A3Q
500 x 40 NMAGDCERFZZ2K1F3Q NNAGDCBEZZ2K3E1F3Q
500 x 200 NKAGDCBEZZ2K3E8A3F
500 x 250 NKAGDCBEZZ2K3E1K3F
500 x 300 NEAFKRBEAN2K3E1M3F NFAFKRBEAN2K3E1M3F NJAFKRBEAN2K3E1M3F
500 x 450 NEAFKRBEAN2K3E1T3F NFAFKRBEAN2K3E1T3F NJAFKRBEAN2K3E1T3F
600 x 200 NKAGDCBEZZ2P3E8A3F
600 x 250 NKAGDCBEZZ2P3E1K3F
600 x 300 NJAFKRBEAN2P3E1M3F
600 x 350 NJAFKRBEAN2P3E1P3E
600 x 400 NEAFKRBEAN2P3E1R3E NFAFKRBEAN2P3E1R3E NJAFKRBEAN2P3E1R3E
Revision Number : 0
Page : 8 / 10
600 x 450 NEAFKRBEAN2P3E1T3F NFAFKRBEAN2P3E1T3F NJAFKRBEAN2P3E1T3F

750 x 15 NMAGDCERFZZ3K0F3Q NNAGDCBEZZ3K3S0F3Q
750 x 20 NMAGDCERFZZ3K0H3Q NNAGDCBEZZ3K3S0H3Q
750 x 25 NMAGDCERFZZ3K1A3Q NNAGDCBEZZ3K3S1A3Q
750 x 40 NMAGDCERFZZ3K1F3Q NNAGDCBEZZ3K3S1F3Q
750 x 50 NKAGDCBEZZ3K3S2A3K
750 x 80 NKAGDCBEZZ3K3S3A3K
750 x 100 NKAGDCBEZZ3K3S4A3G
750 x 150 NKAGDCBEZZ3K3S6A3G
750 x 200 NKAGDCBEZZ3K3S8A3F
750 x 250 NKAGDCBEZZ3K3S1K3F
750 x 300 NKAGDCBEZZ3K3S1M3F
750 x 350 NKAGDCBEZZ3K3S1P3E
750 x 400 NJAFHRBEAC3K3S1R3E
750 x 450 NJAFHRBEAC3K3S1T3F
750 x 500 NJAFHRBEAC3K3S2K3E
750 x 600 NEAFHRBEAC3K3S2P3E NFAFHRBEAC3K3S2P3E NJAFHRBEAC3K3S2P3E
800 x 15 NMAGDCERFZZ3M0F3Q NNAGDCBEZZ3M3S0F3Q
800 x 20 NMAGDCERFZZ3M0H3Q NNAGDCBEZZ3M3S0H3Q
800 x 25 NMAGDCERFZZ3M1A3Q NNAGDCBEZZ3M3S1A3Q
800 x 40 NMAGDCERFZZ3M1F3Q NNAGDCBEZZ3M3S1F3Q
800 x 50 NKAGDCBEZZ3M3S2A3K
800 x 80 NKAGDCBEZZ3M3S3A3K
800 x 100 NKAGDCBEZZ3M3S4A3G
800 x 150 NKAGDCBEZZ3M3S6A3G
800 x 600 NEAFHRBEAC3M3S2P3E NFAFHRBEAC3M3S2P3E NJAFHRBEAC3M3S2P3E
800 x 750 NEAFHRBEAC3M3S3K3S NFAFHRBEAC3M3S3K3S NJAFHRBEAC3M3S3K3S
900 x 15 NMAGDCERFZZ3R0F3Q NNAGDCBEZZ3R3S0F3Q
900 x 20 NMAGDCERFZZ3R0H3Q NNAGDCBEZZ3R3S0H3Q
900 x 25 NMAGDCERFZZ3R1A3Q NNAGDCBEZZ3R3S1A3Q
900 x 40 NMAGDCERFZZ3R1F3Q NNAGDCBEZZ3R3S1F3Q
900 x 50 NKAGDCBEZZ3R3S2A3K
900 x 80 NKAGDCBEZZ3R3S3A3K
900 x 200 NKAGDCBEZZ3R3S8A3F
900 x 250 NKAGDCBEZZ3R3S1K3F
900 x 300 NKAGDCBEZZ3R3S1M3F
900 x 350 NKAGDCBEZZ3R3S1P3E
900 x 400 NKAGDCBEZZ3R3S1R3E
900 x 450 NJAFHRBEAC3R3S1T3F
900 x 500 NJAFHRBEAC3R3S2K3E
900 x 600 NEAFHRBEAC3R3S2P3E NFAFHRBEAC3R3S2P3E NJAFHRBEAC3R3S2P3E
900 x 750 NEAFHRBEAC3R3S3K3S NFAFHRBEAC3R3S3K3S NJAFHRBEAC3R3S3K3S
Revision Number : 0
Page : 9 / 10
BLT CT API594 WFR LG BLT CT API609 WFR LG BLT FOR CT BLD SPC
50 4 5/8 x 150 BAACAAAB0G1L 80 4 5/8 x 150 BAACAAAB0G1L 15 4 1/2 x 80 BAACAAAB0F0S

80 4 5/8 x 170 BAACAAAB0G1Q 100 8 5/8 x 160 BAACAAAB0G1N 20 4 1/2 x 80 BAACAAAB0F0S
100 8 5/8 x 170 BAACAAAB0G1Q 150 8 3/4 x 170 BAACAAAB0H1Q 25 4 1/2 x 90 BAACAAAB0F0U
150 8 3/4 x 210 BAACAAAB0H2C 200 8 3/4 x 180 BAACAAAB0H1S 40 4 1/2 x 90 BAACAAAB0F0U
200 8 3/4 x 240 BAACAAAB0H2J 250 12 7/8 x 200 BAACAAAB0J2A 50 4 5/8 x 100 BAACAAAB0G1A
250 12 7/8 x 270 BAACAAAB0J2Q 300 12 7/8 x 210 BAACAAAB0J2C 80 4 5/8 x 110 BAACAAAB0G1C
300 12 7/8 x 310 BAACAAAB0J3C 350 12 1 x 240 BAACAAAB1A2J 100 8 5/8 x 120 BAACAAAB0G1E
350 12 1 x 330 BAACAAAB1A3G 400 16 1 x 250 BAACAAAB1A2L 150 8 3/4 x 130 BAACAAAB0H1G
400 16 1 x 340 BAACAAAB1A3J 450 16 1-1/8 x 270 BAACAAAB1B2Q 200 8 3/4 x 140 BAACAAAB0H1J
450 16 1-1/8 x 360 BAACAAAB1B3N 500 20 1-1/8 x 300 BAACAAAB1B3A 250 12 7/8 x 150 BAACAAAB0J1L
500 20 1-1/8 x 390 BAACAAAB1B3U 600 20 1-1/4 x 340 BAACAAAB1D3J 300 12 7/8 x 160 BAACAAAB0J1N
600 20 1-1/4 x 410 BAACAAAB1D4B 750 28 1-1/2 x 410 BAACAAAB1F4B 350 12 1 x 140 BAACAAAB1A1J
750 28 1-1/4 x 550 BAACAAAB1D4U 900 32 1-1/2 x 480 BAACAAAB1F4N 400 16 1 x 180 BAACAAAB1A1S
900 32 1-1/2 x 660 BAACAAAB1F6K 1050 36 1-1/2 x 540 BAACAAAB1F4T 450 16 1-1/8 x 200 BAACAAAB1B2A
1050 36 1-1/2 x 740 BAACAAAB1F6Q 1200 44 1-1/2 x 590 BAACAAAB1F5S 500 20 1-1/8 x 210 BAACAAAB1B2C
1200 44 1-1/2 x 850 BAACAAAB1F8Q 600 20 1-1/4 x 240 BAACAAAB1D2J
750 28 1-1/4 x 300 BAACAAAB1D3A
900 32 1-1/2 x 360 BAACAAAB1F3N
1050 36 1-1/2 x 360 BAACAAAB1F3N
1200 44 1-1/2 x 390 BAACAAAB1F3U
Revision Number : 0
Page : 10 / 10
BLT FOR CT ORI FLG BLT FOR CT STD FLG

50 8 5/8 x 130 BAACAAAB0G1G 15 4 1/2 x 70 BAACAAAB0F0Q

80 8 3/4 x 140 BAACAAAB0H1J 20 4 1/2 x 70 BAACAAAB0F0Q
100 8 3/4 x 150 BAACAAAB0H1L 25 4 1/2 x 80 BAACAAAB0F0S
150 12 3/4 x 150 BAACAAAB0H1L 40 4 1/2 x 80 BAACAAAB0F0S
200 12 7/8 x 170 BAACAAAB0J1Q 50 4 5/8 x 90 BAACAAAB0G0U
250 16 1 x 190 BAACAAAB1A1U 80 4 5/8 x 100 BAACAAAB0G1A
300 16 1-1/8 x 210 BAACAAAB1B2C 100 8 5/8 x 100 BAACAAAB0G1A
350 20 1-1/8 x 220 BAACAAAB1B2E 150 8 3/4 x 110 BAACAAAB0H1C
400 20 1-1/4 x 230 BAACAAAB1D2G 200 8 3/4 x 120 BAACAAAB0H1E
450 24 1-1/4 x 250 BAACAAAB1D2L 250 12 7/8 x 130 BAACAAAB0J1G
500 24 1-1/4 x 260 BAACAAAB1D2N 300 12 7/8 x 130 BAACAAAB0J1G
600 24 1-1/2 x 290 BAACAAAB1F2U 350 12 1 x 140 BAACAAAB1A1J
400 16 1 x 150 BAACAAAB1A1L
450 16 1-1/8 x 170 BAACAAAB1B1Q
500 20 1-1/8 x 180 BAACAAAB1B1S
600 20 1-1/4 x 190 BAACAAAB1D1U
750 28 1-1/4 x 250 BAACAAAB1D2L
900 32 1-1/2 x 310 BAACAAAB1F3C
1050 36 1-1/2 x 300 BAACAAAB1F3A
1200 44 1-1/2 x 320 BAACAAAB1F3E
P_NOSBL
1C136EF
Killed Carbon Steel, PE COATED Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C136EF
Revision Number : 0
Page : 2 / 7

TYPE OF MATERIAL : Carbon Steel F-Gr, PE Coated
Pressure (barG)
DN 15 to 800 19.6 19.2 18.4 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400 450 500 600 750 800
S-20 S-30 S-20 S-20 S-XS S-XS

Pipes & Tubes
P5 15 - 600 / - Pipe, ASME B36.10M, BE, ASTM A106-B, SMLS with PE Coating PPPABQBEACR1ABM
P10 750 - 800 / - Pipe, ASME B36.10M, BE, ASTM A672-C65 CL22, Submerged Arc Welding (SAW) with PPPABQBEA1BHCAMZ
PE Coating
Gate Valves
Grade 2H Nuts
Nuts
VG110 80 - 250 / - Knife Edge Gate Vlv, MSS SP-81, CL 150, RF, Bonnetless, Extended Stem Handwheel VGKAARDRFAUACD2ABZZZZZ
Operator , ASTM A216-WCB, AISI 316, Stellite 6 Trim
VG115 300 - 350 / - Knife Edge Gate Vlv, MSS SP-81, CL 150, RF, Bonnetless, Extended Stem Gear Operator , VGKAARDRFAHOACD2ABZZZZ
ASTM A216-WCB, AISI 316, Stellite 6 Trim
Flanges
F305 15 - 600 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A105, PE Coated FBLABLDRFACGDAAZ
F310 15 - 600 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A105, PE Coated FWNABLDRFACGDAAZ
F315 750 - 750 / - WN Flg., ASME B16.47 Sr A, CL 150, RFFE , ASTM A105, PE Coated FWNABHDRFACGDAAZ
F320 80 - 600 / - WN Flg., ASME B16.5, CL 150, FF , ASTM A105, PE Coated FWNABLDFFACGDAAZ
F325 800 - 800 / - WN Flg., ASME B16.47 Sr A, CL 150, FF , ASTM A105, PE Coated FWNABHDFFACGDAAZ
BW Fittings
B410 750 - 800 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPB, Welded with PE Coating BE4LABMBEACKCAFZ
B420 750 - 800 / - 90 Deg. LR Elbow, ASME B16.9, BE , ASTM A234-WPB, Welded with PE Coating BE9LABMBEACKCAFZ
B425 15 - 600 / - Cap, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BCAPABMBEACK1ABT
B430 20 - 600 / 15 - 500 Con. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BRECABMBEACK1ABT
B435 800 - 800 / 750 - 750 Con. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded, 100% RT, with PE BRECABMBEA1AW1ABX
coating
B440 20 - 600 / 15 - 500 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BREEABMBEACK1ABT
B445 800 - 800 / 750 - 750 Ecc. Reducer, ASME B16.9, BE , ASTM A234-WPBW, Welded, 100% RT, with PE coating BREEABMBEA1AW1ABX
B450 15 - 600 / - Equal Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BTEEABMBEACK1ABT
B455 20 - 600 / 15 - 500 Red. Tee, ASME B16.9, BE , ASTM A234-WPB, Seamless with PE Coating BTERABMBEACK1ABT
B460 150 - 800 / 50 - 350 Weldolet, MSS SP-97, BE , ASTM A105, PE Coated BWELAM9BEACGDAAZ
Forged Fittings
O505 40 - 600 / 15 - 40 Flangeolet, MSS SP-97, CL 150, RFFE , ASTM A105, PE Coated O1AAAM9DRFACGDAAZ
O510 40 - 600 / 15 - 40 Nippolet, MSS SP-97, BE , ASTM A105, PE Coated O1ABAM9BEACGDAAZ
Gaskets
(EPDM), ASME B16.5
(EPDM), ASME B16.5
Bolts & Nuts
Coated
Revision Number : 0
Page : 3 / 7

Legend and chart
Branch Table: CLASS1C136EF_BRF Legend:

800 T E Red. Tee
750 E T LEE 45 Deg Eq Lat Tee
600 E E T T Equal Tee
500 E E E T W Weldolet
450 E E E E T
400 E E E E E T
350 W W E E E E T
300 W W E E E E E T
250 W W W W E E E E T
200 W W W W W W E E E T
150 W W W W W W W E E E T
100 W W W W W W W W E E E T
80 W W W W W W W W W W E E T
50 W W W W W W W W W W W E E T
40 A A A A A A A A A A A A A E T
20 A A A A A A A A A A A A A A E E T
800 750 600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
208 DN 150 size 45 deg equal lateral tee is the specific requirement for direction change in equal branching in underground routing.
X34 Flat face flanges to be used for connection with firewater lines.
X35 EPDM gasket to be used for flat face flange connection.
Revision Number : 0
Page : 4 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 800
Pipes & Tubes

P5 PAATFPZBERD 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
P10 PAATEMZBEFV 3K3S 3M3S
Gate Valves
VG110 VYBNBKERFBPPCX ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K
VG115 VYBNBKERFBPMCX ZZ1M ZZ1P
Flanges
F305 FEALDCERF CF0F CF0H CF1A CF1F CF2A CF3A CF4A CF6A CF8A CF1K CF1M CF1P CF1R CF1T CF2K CF2P
F310 FLALDCERFCF 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F315 FLAKDCERFCF 3K3S
F320 FLALDCEFFCF 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
F325 FLAKDCEFFCF 3M3S
BW Fittings
B405 NBAFKRBERM 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B410 NBAFKRBEFJ 3K3S 3M3S
B415 NCAFKRBERM 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B420 NCAFKRBEFJ 3K3S 3M3S
B425 NAAFKRBERM 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
B450 NHAFKRBERM 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E 1T3F 2K3E 2P3E
Gaskets
G605 GAANDUERFDG 3K0C
G610 GCARENEFFSA 0F0A 0H0A 1A0A 1F0A 2A0A 3A0A 4A0A 6A0A 8A0A 1K0A 1M0A 1P0A 1R0A 1T0A 2K0A 2P0A
G615 GCARENEFFSA 3K0A 3M0A
D705 FAAMGXERT AR1P AR1R AR1T AR2K AR2P
D710 FBAMGXERT AR1P AR1R AR1T AR2K AR2P
D720 WRAJCBERF ZZ2A
Revision Number : 0
Page : 5 / 7
Reducing Component
20 x 15 NEAFKRBERM0H3Q0F3Q NFAFKRBERM0H3Q0F3Q NJAFKRBERM0H3Q0F3Q

25 x 15 NEAFKRBERM1A3Q0F3Q NFAFKRBERM1A3Q0F3Q NJAFKRBERM1A3Q0F3Q
25 x 20 NEAFKRBERM1A3Q0H3Q NFAFKRBERM1A3Q0H3Q NJAFKRBERM1A3Q0H3Q
40 x 15 NEAFKRBERM1F3Q0F3Q NFAFKRBERM1F3Q0F3Q NMAGDCERFAF1F0F3Q NNAGDCBEAF1F3Q0F3Q
40 x 20 NEAFKRBERM1F3Q0H3Q NFAFKRBERM1F3Q0H3Q NJAFKRBERM1F3Q0H3Q
40 x 25 NEAFKRBERM1F3Q1A3Q NFAFKRBERM1F3Q1A3Q NJAFKRBERM1F3Q1A3Q
50 x 15 NMAGDCERFAF2A0F3Q NNAGDCBEAF2A3K0F3Q
50 x 20 NEAFKRBERM2A3K0H3Q NFAFKRBERM2A3K0H3Q NMAGDCERFAF2A0H3Q NNAGDCBEAF2A3K0H3Q
50 x 25 NEAFKRBERM2A3K1A3Q NFAFKRBERM2A3K1A3Q NJAFKRBERM2A3K1A3Q
50 x 40 NEAFKRBERM2A3K1F3Q NFAFKRBERM2A3K1F3Q NJAFKRBERM2A3K1F3Q
80 x 15 NMAGDCERFAF3A0F3Q NNAGDCBEAF3A3K0F3Q
80 x 20 NMAGDCERFAF3A0H3Q NNAGDCBEAF3A3K0H3Q
80 x 25 NMAGDCERFAF3A1A3Q NNAGDCBEAF3A3K1A3Q
80 x 40 NEAFKRBERM3A3K1F3Q NFAFKRBERM3A3K1F3Q NMAGDCERFAF3A1F3Q NNAGDCBEAF3A3K1F3Q
80 x 50 NEAFKRBERM3A3K2A3K NFAFKRBERM3A3K2A3K NJAFKRBERM3A3K2A3K
100 x 15 NMAGDCERFAF4A0F3Q NNAGDCBEAF4A3G0F3Q
100 x 20 NMAGDCERFAF4A0H3Q NNAGDCBEAF4A3G0H3Q
100 x 25 NMAGDCERFAF4A1A3Q NNAGDCBEAF4A3G1A3Q
100 x 40 NEAFKRBERM4A3G1F3Q NFAFKRBERM4A3G1F3Q NMAGDCERFAF4A1F3Q NNAGDCBEAF4A3G1F3Q
100 x 50 NEAFKRBERM4A3G2A3K NFAFKRBERM4A3G2A3K NJAFKRBERM4A3G2A3K
150 x 20 NMAGDCERFAF6A0H3Q NNAGDCBEAF6A3G0H3Q
150 x 25 NMAGDCERFAF6A1A3Q NNAGDCBEAF6A3G1A3Q
150 x 50 NKAGDCBECE6A3G2A3K
150 x 100 NEAFKRBERM6A3G4A3G NFAFKRBERM6A3G4A3G NJAFKRBERM6A3G4A3G
200 x 15 NMAGDCERFAF8A0F3Q NNAGDCBEAF8A3F0F3Q
200 x 20 NMAGDCERFAF8A0H3Q NNAGDCBEAF8A3F0H3Q
200 x 25 NMAGDCERFAF8A1A3Q NNAGDCBEAF8A3F1A3Q
200 x 40 NMAGDCERFAF8A1F3Q NNAGDCBEAF8A3F1F3Q
200 x 50 NKAGDCBECE8A3F2A3K
200 x 80 NKAGDCBECE8A3F3A3K
200 x 100 NEAFKRBERM8A3F4A3G NFAFKRBERM8A3F4A3G NJAFKRBERM8A3F4A3G
200 x 150 NEAFKRBERM8A3F6A3G NFAFKRBERM8A3F6A3G NJAFKRBERM8A3F6A3G
250 x 15 NMAGDCERFAF1K0F3Q NNAGDCBEAF1K3F0F3Q
250 x 20 NMAGDCERFAF1K0H3Q NNAGDCBEAF1K3F0H3Q
250 x 25 NMAGDCERFAF1K1A3Q NNAGDCBEAF1K3F1A3Q
250 x 40 NMAGDCERFAF1K1F3Q NNAGDCBEAF1K3F1F3Q
250 x 50 NKAGDCBECE1K3F2A3K
250 x 80 NKAGDCBECE1K3F3A3K
250 x 100 NEAFKRBERM1K3F4A3G NFAFKRBERM1K3F4A3G NJAFKRBERM1K3F4A3G
250 x 150 NEAFKRBERM1K3F6A3G NFAFKRBERM1K3F6A3G NJAFKRBERM1K3F6A3G
250 x 200 NEAFKRBERM1K3F8A3F NFAFKRBERM1K3F8A3F NJAFKRBERM1K3F8A3F
300 x 15 NMAGDCERFAF1M0F3Q NNAGDCBEAF1M3F0F3Q
300 x 20 NMAGDCERFAF1M0H3Q NNAGDCBEAF1M3F0H3Q
300 x 25 NMAGDCERFAF1M1A3Q NNAGDCBEAF1M3F1A3Q
300 x 40 NMAGDCERFAF1M1F3Q NNAGDCBEAF1M3F1F3Q
300 x 50 NKAGDCBECE1M3F2A3K
300 x 80 NKAGDCBECE1M3F3A3K
300 x 100 NKAGDCBECE1M3F4A3G
300 x 150 NEAFKRBERM1M3F6A3G NFAFKRBERM1M3F6A3G NJAFKRBERM1M3F6A3G
300 x 200 NEAFKRBERM1M3F8A3F NFAFKRBERM1M3F8A3F NJAFKRBERM1M3F8A3F
300 x 250 NEAFKRBERM1M3F1K3F NFAFKRBERM1M3F1K3F NJAFKRBERM1M3F1K3F
350 x 15 NMAGDCERFAF1P0F3Q NNAGDCBEAF1P3E0F3Q
350 x 20 NMAGDCERFAF1P0H3Q NNAGDCBEAF1P3E0H3Q
350 x 25 NMAGDCERFAF1P1A3Q NNAGDCBEAF1P3E1A3Q
Revision Number : 0
Page : 6 / 7
350 x 50 NKAGDCBECE1P3E2A3K
350 x 100 NKAGDCBECE1P3E4A3G
350 x 150 NEAFKRBERM1P3E6A3G NFAFKRBERM1P3E6A3G NKAGDCBECE1P3E6A3G
350 x 200 NEAFKRBERM1P3E8A3F NFAFKRBERM1P3E8A3F NJAFKRBERM1P3E8A3F
350 x 250 NEAFKRBERM1P3E1K3F NFAFKRBERM1P3E1K3F NJAFKRBERM1P3E1K3F
350 x 300 NEAFKRBERM1P3E1M3F NFAFKRBERM1P3E1M3F NJAFKRBERM1P3E1M3F
400 x 15 NMAGDCERFAF1R0F3Q NNAGDCBEAF1R3E0F3Q
400 x 20 NMAGDCERFAF1R0H3Q NNAGDCBEAF1R3E0H3Q
400 x 25 NMAGDCERFAF1R1A3Q NNAGDCBEAF1R3E1A3Q
400 x 40 NMAGDCERFAF1R1F3Q NNAGDCBEAF1R3E1F3Q
400 x 50 NKAGDCBECE1R3E2A3K
400 x 80 NKAGDCBECE1R3E3A3K
400 x 100 NKAGDCBECE1R3E4A3G
400 x 150 NKAGDCBECE1R3E6A3G
400 x 200 NEAFKRBERM1R3E8A3F NFAFKRBERM1R3E8A3F NKAGDCBECE1R3E8A3F
400 x 250 NEAFKRBERM1R3E1K3F NFAFKRBERM1R3E1K3F NJAFKRBERM1R3E1K3F
400 x 300 NEAFKRBERM1R3E1M3F NFAFKRBERM1R3E1M3F NJAFKRBERM1R3E1M3F
400 x 350 NEAFKRBERM1R3E1P3E NFAFKRBERM1R3E1P3E NJAFKRBERM1R3E1P3E
450 x 15 NMAGDCERFAF1T0F3Q NNAGDCBEAF1T3F0F3Q
450 x 20 NMAGDCERFAF1T0H3Q NNAGDCBEAF1T3F0H3Q
450 x 25 NMAGDCERFAF1T1A3Q NNAGDCBEAF1T3F1A3Q
450 x 40 NMAGDCERFAF1T1F3Q NNAGDCBEAF1T3F1F3Q
450 x 50 NKAGDCBECE1T3F2A3K
450 x 80 NKAGDCBECE1T3F3A3K
450 x 100 NKAGDCBECE1T3F4A3G
450 x 150 NKAGDCBECE1T3F6A3G
450 x 200 NKAGDCBECE1T3F8A3F
450 x 250 NEAFKRBERM1T3F1K3F NFAFKRBERM1T3F1K3F NJAFKRBERM1T3F1K3F
450 x 300 NEAFKRBERM1T3F1M3F NFAFKRBERM1T3F1M3F NJAFKRBERM1T3F1M3F
450 x 350 NEAFKRBERM1T3F1P3E NFAFKRBERM1T3F1P3E NJAFKRBERM1T3F1P3E
450 x 400 NEAFKRBERM1T3F1R3E NFAFKRBERM1T3F1R3E NJAFKRBERM1T3F1R3E
500 x 15 NMAGDCERFAF2K0F3Q NNAGDCBEAF2K3E0F3Q
500 x 20 NMAGDCERFAF2K0H3Q NNAGDCBEAF2K3E0H3Q
500 x 25 NMAGDCERFAF2K1A3Q NNAGDCBEAF2K3E1A3Q
500 x 40 NMAGDCERFAF2K1F3Q NNAGDCBEAF2K3E1F3Q
500 x 50 NKAGDCBECE2K3E2A3K
500 x 80 NKAGDCBECE2K3E3A3K
500 x 100 NKAGDCBECE2K3E4A3G
500 x 150 NKAGDCBECE2K3E6A3G
500 x 200 NKAGDCBECE2K3E8A3F
500 x 250 NKAGDCBECE2K3E1K3F
500 x 300 NEAFKRBERM2K3E1M3F NFAFKRBERM2K3E1M3F NJAFKRBERM2K3E1M3F
500 x 350 NEAFKRBERM2K3E1P3E NFAFKRBERM2K3E1P3E NJAFKRBERM2K3E1P3E
500 x 400 NEAFKRBERM2K3E1R3E NFAFKRBERM2K3E1R3E NJAFKRBERM2K3E1R3E
500 x 450 NEAFKRBERM2K3E1T3F NFAFKRBERM2K3E1T3F NJAFKRBERM2K3E1T3F
600 x 20 NMAGDCERFAF2P0H3Q NNAGDCBEAF2P3E0H3Q
600 x 25 NMAGDCERFAF2P1A3Q NNAGDCBEAF2P3E1A3Q
600 x 200 NKAGDCBECE2P3E8A3F
600 x 250 NKAGDCBECE2P3E1K3F
600 x 300 NJAFKRBERM2P3E1M3F
600 x 350 NJAFKRBERM2P3E1P3E
600 x 400 NEAFKRBERM2P3E1R3E NFAFKRBERM2P3E1R3E NJAFKRBERM2P3E1R3E
Revision Number : 0
Page : 7 / 7
600 x 450 NEAFKRBERM2P3E1T3F NFAFKRBERM2P3E1T3F NJAFKRBERM2P3E1T3F

600 x 500 NEAFKRBERM2P3E2K3E NFAFKRBERM2P3E2K3E NJAFKRBERM2P3E2K3E
750 x 50 NKAGDCBECE3K3S2A3K
750 x 80 NKAGDCBECE3K3S3A3K
750 x 100 NKAGDCBECE3K3S4A3G
750 x 150 NKAGDCBECE3K3S6A3G
750 x 200 NKAGDCBECE3K3S8A3F
750 x 250 NKAGDCBECE3K3S1K3F
750 x 300 NKAGDCBECE3K3S1M3F
750 x 350 NKAGDCBECE3K3S1P3E
800 x 50 NKAGDCBECE3M3S2A3K
800 x 80 NKAGDCBECE3M3S3A3K
800 x 100 NKAGDCBECE3M3S4A3G
800 x 150 NKAGDCBECE3M3S6A3G
800 x 200 NKAGDCBECE3M3S8A3F
800 x 250 NKAGDCBECE3M3S1K3F
800 x 300 NKAGDCBECE3M3S1M3F
800 x 750 NEAFHRBERP3M3S3K3S NFAFHRBERP3M3S3K3S
BLT FOR CT BLD SPC BLT CT MSSSP81 LUG BLT FOR CT STD FLG
15 4 1/2 x 80 BAACAAAB0F0S 80 4 5/8 x 150 BAACAAAB0G1L 15 4 1/2 x 70 BAACAAAB0F0Q

20 4 1/2 x 80 BAACAAAB0F0S 100 8 5/8 x 150 BAACAAAB0G1L 20 4 1/2 x 70 BAACAAAB0F0Q
25 4 1/2 x 90 BAACAAAB0F0U 150 8 3/4 x 170 BAACAAAB0H1Q 25 4 1/2 x 80 BAACAAAB0F0S
40 4 1/2 x 90 BAACAAAB0F0U 200 8 3/4 x 190 BAACAAAB0H1U 40 4 1/2 x 80 BAACAAAB0F0S
50 4 5/8 x 100 BAACAAAB0G1A 250 12 7/8 x 200 BAACAAAB0J2A 50 4 5/8 x 90 BAACAAAB0G0U
80 4 5/8 x 110 BAACAAAB0G1C 300 12 7/8 x 210 BAACAAAB0J2C 80 4 5/8 x 100 BAACAAAB0G1A
100 8 5/8 x 120 BAACAAAB0G1E 350 12 1 x 220 BAACAAAB1A2E 100 8 5/8 x 100 BAACAAAB0G1A
200 8 3/4 x 140 BAACAAAB0H1J 200 8 3/4 x 120 BAACAAAB0H1E
250 12 7/8 x 150 BAACAAAB0J1L 250 12 7/8 x 130 BAACAAAB0J1G
300 12 7/8 x 160 BAACAAAB0J1N 300 12 7/8 x 130 BAACAAAB0J1G
350 12 1 x 140 BAACAAAB1A1J 350 12 1 x 140 BAACAAAB1A1J
400 16 1 x 180 BAACAAAB1A1S 400 16 1 x 150 BAACAAAB1A1L
450 16 1-1/8 x 200 BAACAAAB1B2A 450 16 1-1/8 x 170 BAACAAAB1B1Q
500 20 1-1/8 x 210 BAACAAAB1B2C 500 20 1-1/8 x 180 BAACAAAB1B1S
600 20 1-1/4 x 240 BAACAAAB1D2J 600 20 1-1/4 x 190 BAACAAAB1D1U
750 28 1-1/4 x 300 BAACAAAB1D3A 750 28 1-1/4 x 250 BAACAAAB1D2L
900 32 1-1/2 x 360 BAACAAAB1F3N 900 32 1-1/2 x 310 BAACAAAB1F3C
1050 36 1-1/2 x 360 BAACAAAB1F3N 1050 36 1-1/2 x 300 BAACAAAB1F3A
1200 44 1-1/2 x 390 BAACAAAB1F3U 1200 44 1-1/2 x 320 BAACAAAB1F3E
P_NOSBL
1C136EG
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1C136EG
Revision Number : 0
Page : 2 / 7

Pressure (barG)
DN 15 to 400 19.6 19.2 18.4 17.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
400
S-20

Pipes & Tubes
Check Valves
Nuts
Gate Valves
Grade 2H Nuts
Nuts
VG166 80 - 250 / - Knife Edge Gate Vlv, MSS SP-81, PN 10, RF, Bonnetless, Handwheel , ASTM A216-WCB, VGKDJ4DRFAFACD2ABZZZZZ
AISI 316, Stellite 6 Trim
VG168 300 - 350 / - Knife Edge Gate Vlv, MSS SP-81, PN 10, RF, Bonnetless, Bevel Gear Operator , ASTM VGKDJ4DRFAAACD2ABZZZZZ
A216-WCB, AISI 316, Stellite 6 Trim
VG170 100 - 150 / - Knife Edge Gate Vlv, MSS SP-81, PN 10, RF, Bonnetless, Handwheel , ASTM A216-WCB, VGKDJ4DRFAFACD2ABGKTZZ
AISI 316, Stellite 6 Trim, Extension Stem
Flanges
BW Fittings
Forged Fittings
Gaskets
Bolts & Nuts
Coated
Revision Number : 0
Page : 3 / 7

Revision Number : 0
Page : 4 / 7

Legend and chart
Branch Table: CLASS1C136EG_BR Legend:

400 T E Red. Tee
350 E T T Equal Tee
250 E E E T
200 W E E E T
150 W W E E E T
100 W W W E E E T
80 W W W W W E E T
50 W W W W W W E E T
40 A A A A A A A A E T
400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
Revision Number : 0
Page : 5 / 7
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400
Pipes & Tubes

P10 PAATFPZBEEX 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
Check Valves
VC157 LQBDDAERFZRC ZZ1M
Gate Valves
VG166 VYDGBKARFBPECX ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K
VG168 VYDGBKARFBPBCX ZZ1M ZZ1P
VG170 VYDGBKARFBPECX NU4A NU6A
Flanges
F305 FEALDCERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R
F325 FLALDCERFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
F326 FLALDCERFCG 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
F331 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
F335 FLALDCEFFZZ 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
BW Fittings
B405 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B415 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B416 HLAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B417 HMAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B425 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
B450 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3F 1K3F 1M3F 1P3E 1R3E
Gaskets
G610 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D
G625 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D
D730 FAAMGXERT AR1P AR1R
D750 FBAMGXERT AR1P AR1R
D785 WRAJCBERF ZZ2A
Revision Number : 0
Page : 6 / 7
Reducing Component

250 x 20 NMAGDCERFZZ1K0H3Q NNAGDCBEZZ1K3F0H3Q
250 x 25 NMAGDCERFZZ1K1A3Q NNAGDCBEZZ1K3F1A3Q
250 x 200 NEAFKRBEAN1K3F8A3F NFAFKRBEAN1K3F8A3F NJAFKRBEAN1K3F8A3F
300 x 20 NMAGDCERFZZ1M0H3Q NNAGDCBEZZ1M3F0H3Q
300 x 25 NMAGDCERFZZ1M1A3Q NNAGDCBEZZ1M3F1A3Q
Revision Number : 0
Page : 7 / 7
400 x 20 NMAGDCERFZZ1R0H3Q NNAGDCBEZZ1R3E0H3Q
400 x 25 NMAGDCERFZZ1R1A3Q NNAGDCBEZZ1R3E1A3Q
BLT CT API594 WFR LG BLT FOR CT BLD SPC BLT FOR CT STD FLG
50 4 5/8 x 150 BAACAAAB0G1L 15 4 1/2 x 80 BAACAAAB0F0S 15 4 1/2 x 70 BAACAAAB0F0Q

80 4 5/8 x 170 BAACAAAB0G1Q 20 4 1/2 x 80 BAACAAAB0F0S 20 4 1/2 x 70 BAACAAAB0F0Q
100 8 5/8 x 170 BAACAAAB0G1Q 25 4 1/2 x 90 BAACAAAB0F0U 25 4 1/2 x 80 BAACAAAB0F0S
150 8 3/4 x 210 BAACAAAB0H2C 40 4 1/2 x 90 BAACAAAB0F0U 40 4 1/2 x 80 BAACAAAB0F0S
200 8 3/4 x 240 BAACAAAB0H2J 50 4 5/8 x 100 BAACAAAB0G1A 50 4 5/8 x 90 BAACAAAB0G0U
250 12 7/8 x 270 BAACAAAB0J2Q 80 4 5/8 x 110 BAACAAAB0G1C 80 4 5/8 x 100 BAACAAAB0G1A
300 12 7/8 x 310 BAACAAAB0J3C 100 8 5/8 x 120 BAACAAAB0G1E 100 8 5/8 x 100 BAACAAAB0G1A
350 12 1 x 330 BAACAAAB1A3G 150 8 3/4 x 130 BAACAAAB0H1G 150 8 3/4 x 110 BAACAAAB0H1C
400 16 1 x 340 BAACAAAB1A3J 200 8 3/4 x 140 BAACAAAB0H1J 200 8 3/4 x 120 BAACAAAB0H1E
250 12 7/8 x 150 BAACAAAB0J1L 250 12 7/8 x 130 BAACAAAB0J1G
300 12 7/8 x 160 BAACAAAB0J1N 300 12 7/8 x 130 BAACAAAB0J1G
350 12 1 x 140 BAACAAAB1A1J 350 12 1 x 140 BAACAAAB1A1J
400 16 1 x 180 BAACAAAB1A1S 400 16 1 x 150 BAACAAAB1A1L
BLT CT MSSSP81 LUG

80 4 5/8 x 150 BAACAAAB0G1L

100 8 5/8 x 150 BAACAAAB0G1L
150 8 3/4 x 170 BAACAAAB0H1Q
200 8 3/4 x 190 BAACAAAB0H1U
250 12 7/8 x 200 BAACAAAB0J2A
300 12 7/8 x 210 BAACAAAB0J2C
350 12 1 x 220 BAACAAAB1A2E
P_NOSBL
1G100EE
Revision: 0
Issue Date : Apr 07, 2022
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1G100EE
Revision Number : 0
Page : 2 / 6

Pressure (barG)
DN 15 to 150 16.0 16.0
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150

Pipes & Tubes
P5 15 - 50 / - Pipe, ASME B36.10M, NPT , API 5L Grade B, Galvanized, Seamless PPPABQ1AAEEAALZ
P10 80 - 150 / - Pipe, ASME B36.10M, BE , API 5L Grade B, Seamless PPPABQBEAEEAAGZ
Ball Valves
VB105 15 - 50 / - Ball Vlv SP FB, ISO 17292, CL 800, FTE, Floating Ball, Integral (Non-Extended) Bonnet, VBTA1AKMTF8CAFG2ASZZZZ
Nuts, Water-
Butterfly Valves
VY125 80 - 150 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, RF-, Wrench, ASTM A536 Grade 60-40-18, VYLAA4ERFZEA1BP2AVZZZZ
Aluminium Bronze, EPDM Trim, Elastomeric Seals, ASTM A193 Grade B8M-Class 1
Bolts/Studs, ASTM A194 Grade 8M Nuts, Water
Check Valves
VC150 15 - 50 / - Piston Chk Vlv RB, BS 5154 Series A, PN 25, FTE, Screwed Union Bonnet, ASTM B148 VC1BB1AMFTF6A1BP2DBZZZZ
UNS C95400, Aluminium Bronze Trim, Thermoplastic Seals, Water
VC160 80 - 100 / - Lug Check Dual Pl, API 594, CL 150, RF, ASTM B148 UNS C95400, Aluminium Bronze VCWEAA2DRFZA1BP2AOAAMZ
Trim, Water, ASME B16.5
Globe Valves
VL175 80 - 80 / - Globe Vlv FB, BS 1873, CL 150, RF, Bltd Bonnet, Handwheel , ASTM B148 Grade C (UNS VLRBWEDRFAFAFGBCJZZZZ
C95400), Aluminium Bronze Trim, Thermoplastic Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts, Water
Flanges
F305 80 - 150 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A105, Galvanized FBLABLDRFACGAADZ
F316 15 - 50 / - FTHD, ASME B16.5, CL150, RFFE , ASTM A105, Galvanized FTHABLDRFACGAAD
F320 15 - 50 / - Thd. Flg., ASME B16.5, CL 300, RFFE, ASTM A105, Galvanized FTHABLIRFACGAADZ
BW Fittings
Forged Fittings
Gaskets
Revision Number : 0
Page : 3 / 6

Bolts & Nuts
Coated
D700 15 - 150 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, ASME B16.5, DF8ABMDRTAF1BDEZ
Galvanized
Revision Number : 0
Page : 4 / 6

Legend and chart
Branch Table: 1G100EE_BRF Legend:

150 T E Red. Tee
100 E T T Equal Tee
80 E E T
50 A A A T
40 A A A E T
25 A A A E E T
20 A A A E E E T
15 A A A E E E E T
150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
47 Pre-fab carbon steel pipe spools shall have flanged ends and shall be limited to L- or Z-shapes.
155 For fittings/valves if dimensional standard are referred as Manufacture STD in PMRC Datasheet the Manufacturer's standard for face-to-face dimensions
shall be used.
Revision Number : 0
Page : 5 / 6
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150
Pipes & Tubes

P10 PAATFRZBEEX 3A3G 4A3G 6A3G
Ball Valves
VB105 VWAWCCHTFAZCAE ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Butterfly Valves
VY125 LGBVAPBRFDND ZZ3A ZZ4A ZZ6A
Check Valves
VC150 LKAZBYCTFAFDW ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VC160 LQBDBYERFDB HC3A HC4A
Globe Valves
VL175 VUBNCCERFAJEHS ZZ3A
Flanges
F305 FEALDCERF CC3A CC4A CC6A
F316 FKALDCERF CC0F CC0H CC1A CC1F CC2A
F320 FKALDCFRF CC0F CC0H CC1A CC1F CC2A
F325 FLALDCERFZZ 3A3G 4A3G 6A3G
F326 FLALDCERFCG 3A3G 4A3G 6A3G
F330 FLALDCFRFZZ 3A3G 4A3G 6A3G
BW Fittings
B405 NBAFKRBEAN 3A3G 4A3G 6A3G
B410 NCAFKRBEAN 3A3G 4A3G 6A3G
B415 NAAFKRBEAN 3A3G 4A3G 6A3G
B430 NHAFKRBEAN 3A3G 4A3G 6A3G
Forged Fittings
Gaskets
G605 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D
G610 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D
D700 FCAMGXERT BB0F BB0H BB1A BB1F BB2A BB3A BB4A BB6A
Revision Number : 0
Page : 6 / 6
Reducing Component
Run x Branch Concentric Reducer Concentric Swage Eccentric Reducer Eccentric Swage Nippolet Reducer Concentric Reducing Tee
20 x 15 NWACDCTFCX0H0F NJACDCMTFCY0H0F
25 x 15 NWACDCTFCX1A0F NJACDCMTFCY1A0F
25 x 20 NWACDCTFCX1A0H NJACDCMTFCY1A0H
40 x 15 NWACDCTFCX1F0F NJACDCMTFCY1F0F
40 x 20 NWACDCTFCX1F0H NJACDCMTFCY1F0H
40 x 25 NWACDCTFCX1F1A NJACDCMTFCY1F1A
50 x 25 NWACDCTFCX2A1A NJACDCMTFCY2A1A
80 x 15 MAAKKRTNZZ3A3G0F3K MBAKKRTNZZ3A3G0F3K NNAGDCTMCF3A3G0F3K
80 x 20 MAAKKRTNZZ3A3G0H3K MBAKKRTNZZ3A3G0H3K NNAGDCTMCF3A3G0H3K
80 x 25 MAAKKRTNZZ3A3G1A3K MBAKKRTNZZ3A3G1A3K NNAGDCTMCF3A3G1A3K
150 x 15 NNAGDCTMCF6A3G0F3K
150 x 20 NNAGDCTMCF6A3G0H3K
150 x 25 NNAGDCTMCF6A3G1A3K
150 x 40 NNAGDCTMCF6A3G1F3K
150 x 50 NNAGDCTMCF6A3G2A3K
BLT FOR CT BLD/SPCR BLT CT FOR WAFER LUG

15 4 1/2 x 80 BAACAAAB0F0S 80 4 5/8 x 150 BAACAAAB0G1L

20 4 1/2 x 80 BAACAAAB0F0S 100 8 5/8 x 160 BAACAAAB0G1N
25 4 1/2 x 90 BAACAAAB0F0U 150 8 3/4 x 170 BAACAAAB0H1Q
40 4 1/2 x 80 BAACAAAB0F0S 200 8 3/4 x 180 BAACAAAB0H1S
100 8 5/8 x 120 BAACAAAB0G1E
150 8 3/4 x 130 BAACAAAB0H1G
BLT FOR CT STD FLG

100 8 5/8 x 100 BAACAAAB0G1A
150 8 3/4 x 110 BAACAAAB0H1C
200 8 3/4 x 110 BAACAAAB0H1C
P_NOSBL
1G340
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 6

Pressure (barG)
DN 15 to 100 16.0 16.0
Size/Schedule
Size (DN) 15 20 25 40 50 80 100

Pipes & Tubes
P5 15 - 50 / - Pipe, ASME B36.10M, NPT , API 5L Grade B, Galvanized, Seamless PPPABQ1AAEEAALZ
Ball Valves
VB105 15 - 50 / - Ball Vlv SP FB, ISO 17292, CL 800, FTE, Floating Ball, Integral (Non-Extended) Bonnet, VBTA1AKMTF8CAFGBBDZZZZ
Nuts
Butterfly Valves
VY125 80 - 100 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, RF-, Wrench, ASTM A536 Grade 60-40-18, VYLAA4ERFZEA1BP1GCZZZZ
Grade 2H Nuts
Check Valves
VC150 80 - 100 / - Lug Check Dual Pl, API 594, CL 150, RF, ASTM B148 UNS C95400, AISI 410, Stellite 6 VCWEAA2DRFZA1BPBCEAAMZ
Trim, ASME B16.5
VC165 15 - 50 / - Piston Chk Vlv RB , BS 5154 Series A , PN 25, FTE , Screwed Union Bonnet , ASTM B148 VC1BB1AMFTF6AFGBBFZZZZ
Grade C (UNS C95400) , Aluminium Bronze Trim, Thermoplastic Seals
Globe Valves
VL170 15 - 50 / - Globe Valve RB, BS 5154 Series A, PN 25, FTE, Screwed Union Bonnet, Handwheel , VL3BABFTF6FAFGGAUZZZZ
ASTM B148 Grade C (UNS C95400), Aluminium Bronze Trim, Thermoplastic Seals, ASTM
Flanges
F310 15 - 50 / - Blind Flg., ASME B16.5, CL 150, RFFE , ASTM A105, Galvanized FBLABLDRFACGAADZ
F315 15 - 50 / - FTHD, ASME B16.5, CL150, RFFE , ASTM A105, Galvanized FTHABLDRFACGAAD
F320 15 - 50 / - Thd. Flg., ASME B16.5, CL 300, RFFE, ASTM A105, Galvanized FTHABLIRFACGAADZ
BW Fittings
Forged Fittings
O530 15 - 50 / - Union, BS 3799, CL 3000, FTE , ASTM A105, Galvanized OUNOBAASTFACGAADZ
Gaskets
Revision Number : 0
Page : 3 / 6

Gaskets
Bolts & Nuts
Coated
D658 15 - 50 / - Spectacle Blind, ASME B16.48, CL 150, RFTBE , ASTM A516 Grade 70, ASME B16.5, DF8ABMDRTAF1BDEZ
Galvanized
Revision Number : 0
Page : 4 / 6

Legend and chart
Branch Table: CLASS1G340_BRG Legend:

100 T E Red. Tee
80 E T T Equal Tee
50 A A T
40 A A E T
25 A A E E T
20 A A E E E T
15 A A E E E E T
100 80 50 40 25 20 15
RUN SIZES
NOTES:
155 For fittings/valves if dimensional standard are referred as Manufacture STD in PMRC Datasheet the Manufacturer's standard for face-to-face dimensions
shall be used.
X09 DN 15-50: Screwed galvanized prefabricated spools.
DN 80 up: Buttweld carbon steel prefabricated spools.
Revision Number : 0
Page : 5 / 6
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100
Pipes & Tubes

P10 PAATFPZBEEX 3A3G 4A3G
Ball Valves
VB105 VWAWCCHTFAZCCZ ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Butterfly Valves
VY125 LGBVAPBRFZDQZ ZZ3A ZZ4A
Check Valves
VC150 LQBDBYERFZRC HC3A HC4A
VC165 LKAZCCCTFAFER ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Globe Valves
VL170 VTAZCCCTFAFEHS ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
Flanges
F305 FEALDCERF ZZ3A ZZ4A
F310 FEALDCERF CC0F CC0H CC1A CC1F CC2A
F315 FKALDCERF CC0F CC0H CC1A CC1F CC2A
F320 FKALDCFRF CC0F CC0H CC1A CC1F CC2A
F325 FLALDCERFZZ 3A3G 4A3G
F326 FLALDCERFCG 3A3G 4A3G
F330 FLALDCFRFZZ 3A3G 4A3G
BW Fittings
B405 NBAFKRBEAN 3A3G 4A3G
B410 NCAFKRBEAN 3A3G 4A3G
B415 NAAFKRBEAN 3A3G 4A3G
B430 NHAFKRBEAN 3A3G 4A3G
Forged Fittings
O530 NYABDCMTF CY0F CY0H CY1A CY1F CY2A
Gaskets
G605 GEASDUERFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D
G610 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D
D658 FCAMGXERT BB0F BB0H BB1A BB1F BB2A
D700 FCAMGXERT AR3A AR4A
Revision Number : 0
Page : 6 / 6
Reducing Component
Run x Branch Concentric Reducer Concentric Swage Eccentric Reducer Eccentric Swage Nippolet Reducer Concentric Reducing Tee
20 x 15 NWACDCTFCX0H0F NJACDCMTFCY0H0F
40 x 15 NWACDCTFCX1F0F NJACDCMTFCY1F0F
40 x 20 NWACDCTFCX1F0H NJACDCMTFCY1F0H
40 x 25 NWACDCTFCX1F1A NJACDCMTFCY1F1A
50 x 25 NWACDCTFCX2A1A NJACDCMTFCY2A1A
100 x 50 NEAFKRBEAN4A3G2A3K MAAKKRTNZZ4A3G2A3K NFAFKRBEAN4A3G2A3K MBAKKRTNZZ4A3G2A3K NNAGDCTMCF4A3G2A3K
BLT FOR CT BLD/SPCR

100 8 5/8 x 120 BAACAAAB0G1E
BLT FOR CT STD FLG

100 8 5/8 x 100 BAACAAAB0G1A
BLT CT FOR WAFER LUG

80 4 5/8 x 140 BAACAAAB0G1J

100 8 5/8 x 160 BAACAAAB0G1N
P_NOSBL
1N103EE
GRVE-Bisphenol A, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1N103EE
Revision Number : 0
Page : 2 / 7

TYPE OF MATERIAL : GRVE-Bisphenol A
Pressure (barG)
DN 50 to 500 16.0 16.0
DN 200 to 500 19.6 17.9
Size/Schedule for GRVE Pipe
Size (DN) 50 80 100 150 200 250 300 350 400 450 500
Schedule 7.0 mm 6.0 mm 6.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 14.0 mm 16.0 mm 18.0 mm 19.0 mm
Size/Schedule for Carbon Steel Pipe

Size (DN) 200 250 300 350 400 450 500

NP10 50 - 500 / - NM Pipe, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass Reinforced NPPIPAMSEAGRPBZZZZ
Pipes & Tubes
NT20 50 - 500 / - CAP, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass Reinforced NTCAPAMSEAGRPBZZZZ
NT45 80 - 500 / 50 - 450 Concentric Reducer, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTRECAMSEAGRPBZZZZ
NT50 80 - 500 / 50 - 450 Eccentric Reducer, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTREEAMSEAGRPBZZZZ
NT55 50 - 500 / - Equal Tee, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTTEEAMSEAGRPBZZZZ
NT60 200 - 500 / 150 - 450 Reducing Tee, Manufacturer's Standard, PN 16, Plain End Butt And Strap Joint , Glass NTTERAMSEAGRPBZZZZ
NT65 80 - 500 / 50 - 200 Reducing Saddle, Manufacturer's Standard, PN 16, FFFE , Glass Reinforced Vinyl Ester NT5ADAMSEAGRACZZZZ
(GRVE), Bisphenol-A
Butterfly Valves
VY105 200 - 500 / - Bfly Vlv Lug Type, API 609 Cat A, PN 16, FF, Bolted (Non-Extended) Bonnet, Extension VYLAA4ACFFAA1BSBBUZZZZZ
Stem, Bevel Gear Operator, ASTM A395 Grade 60-40-18, Aluminium Bronze, EPDM Trim,
Elastomeric Seals, ASTM A193 Grade B8M-Class 1 Bolts/Studs, ASTM A194 Grade 8M
Nuts, Water, UL/FM
NA200 50 - 500 / - Flange, Manufacturer's Standard, CL 150, Plain End Butt And Strap Joint x FFFE , Glass NAFLGAMSATAGRBFZZZZ
NA210 50 - 500 / - Blind Flange, Manufacturer's Standard, CL 150, FFFE , Glass Reinforced Vinyl Ester NAFLBAMSATAGRACZZZZ
(GRVE), Bisphenol-A
Flanges
F220 200 - 500 / - SO Flg, ASME B16.5, CL 150, FF, ASTM A105 FSGABLDFFACGZZZZ
Gaskets
Bolts & Nuts
L650 18 - 28.575 / - Stud Bolt, BS 4882 , ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts, 2 FL Washers LS1B1AAA1ANAABZ
Revision Number : 0
Page : 3 / 7

Legend and chart
Branch Table: 1N103EE_BR Legend:

BRANCH SIZES 5AD Reducing Saddle
500 TEE TEE Equal Tee
450 TER TEE TER Reducing Tee
400 TER TER TEE
350 TER TER TER TEE
300 TER TER TER TER TEE
250 TER TER TER TER TER TEE
200 5AD 5AD 5AD 5AD TER TER TEE
150 TER 5AD 5AD 5AD 5AD TER TER TEE
100 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD TEE
80 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD TEE
50 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD 5AD TEE
500 450 400 350 300 250 200 150 100 80 50
RUN SIZES
NOTES:
39 Design limits acc. to the nom. pressure of valves.
40 For requirements regarding GRP piping systems see TOSP-P038-EXE-DEC-0001-PIP-SPN-0016 Specification for Glass-Fibre Reinforced Plastic Pipeline
and Piping System.
41 Bolts for GRP flanges to be provided with washers.
42 Piping material: glass reinforced vinylester resin Bisphenol A "post-cured".
44 Bolt sets not shown in piping class; flange thickness differs per manufacturer.
170 Thickness of GRVE fitting is increased at marked locations in isometrics due to GRVE vendor recommendation.
193 GRVE Pipes & fittings Schedule shall confirm to PN16.
194 GRVE Stiffness shall be SN 5000 N/m2.
195 GRVE Pipes shall confirm to AWWA C950.
210 Bolts for GRVE flanges to be provided with washers.
X12 The schedules of the GRVE pipes differs per manufacturer.
X13 Any smaller length of GRVE pipes if installed at above ground shall be provided with UV protection.
X16 Post Indicator Valve details to be referred to datasheet TOSP-P038-EXE-DEC-6335-PIP-TDS-0009 Data Sheet for PIV for Firewater for Scope 2.
X20 Reducing saddle is flanged end olet or plain end olet.
X21 This specification is based on FIBERBOND Piping Specification - Series 20FR16.
X22 Branch fitting with flanged end branch outlet shall be used only where required.
X23 Washers shall be ANSI B18.22.1 Type A Narrow SAE series Circular type.
X28 Corrosion allowance for GRVE is 0.0 mm and for Carbon Steel is 3.0 mm.
Revision Number : 0
Page : 4 / 7
Nominal Pipe Size
Short Code PMRC 50 80 100 150 200 250 300 350 400 450 500

NP10 PPTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3
Pipes & Tubes
P15 PAATFPZBEEX 8A3F 1K3F 1M3F 1P3E 1R3E 1T3E 2K3E
NT20 RPTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3
NT25 NBTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3
NT30 NCTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3
NT55 NHTLGRBPBZZZ 2A8P 3A8X 4A8X 6A8X 8A7J 1K7D 1M0C 1P9A 1R7N 1T0H 2KA3
Butterfly Valves
VY105 LGBVARBFFBBBDC ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
NA200 FTTLGRUBFZZZ 2A4J 3A4J 4A4J 6A4J 8A4J 1K4J 1M4J 1P4J 1R4J 1T4J 2K4J
NA210 FXTLGRUFFZ ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
Flanges
F220 FPALDCEFF ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
F230 FEALDCEFF ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K
Gaskets
G620 GCARDVEFFDU 1P0H 1R0H 1T0H 2K0H
Revision Number : 0
Page : 5 / 7
Reducing Component

200 x 50 RDTLGRBFFZZZ8A7J2A8P
200 x 150 NETLGRBPBZZZ8A7J6A8X NFTLGRBPBZZZ8A7J6A8X NJTLGRBPBZZZ8A7J6A8X
250 x 50 RDTLGRBFFZZZ1K7D2A8P
250 x 80 RDTLGRBFFZZZ1K7D3A8X
250 x 100 NETLGRBPBZZZ1K7D4A8XNFTLGRBPBZZZ1K7D4A8XRDTLGRBFFZZZ1K7D4A8X
250 x 150 NETLGRBPBZZZ1K7D6A8XNFTLGRBPBZZZ1K7D6A8X NJTLGRBPBZZZ1K7D6A8X
250 x 200 NETLGRBPBZZZ1K7D8A7J NFTLGRBPBZZZ1K7D8A7J NJTLGRBPBZZZ1K7D8A7J
300 x 50 RDTLGRBFFZZZ1M0C2A8P
300 x 150 NETLGRBPBZZZ1M0C6A8XNFTLGRBPBZZZ1M0C6A8XRDTLGRBFFZZZ1M0C6A8X
300 x 200 NETLGRBPBZZZ1M0C8A7J NFTLGRBPBZZZ1M0C8A7J NJTLGRBPBZZZ1M0C8A7J
300 x 250 NETLGRBPBZZZ1M0C1K7DNFTLGRBPBZZZ1M0C1K7D NJTLGRBPBZZZ1M0C1K7D
350 x 50 RDTLGRBFFZZZ1P9A2A8P
350 x 150 NETLGRBPBZZZ1P9A6A8X NFTLGRBPBZZZ1P9A6A8X RDTLGRBFFZZZ1P9A6A8X
350 x 200 NETLGRBPBZZZ1P9A8A7J NFTLGRBPBZZZ1P9A8A7J RDTLGRBFFZZZ1P9A8A7J
350 x 250 NETLGRBPBZZZ1P9A1K7D NFTLGRBPBZZZ1P9A1K7D NJTLGRBPBZZZ1P9A1K7D
350 x 300 NETLGRBPBZZZ1P9A1M0CNFTLGRBPBZZZ1P9A1M0C NJTLGRBPBZZZ1P9A1M0C
400 x 50 NETLGRBPBZZZ1R7N2A8P NFTLGRBPBZZZ1R7N2A8P RDTLGRBFFZZZ1R7N2A8P
400 x 150 NETLGRBPBZZZ1R7N6A8XNFTLGRBPBZZZ1R7N6A8XRDTLGRBFFZZZ1R7N6A8X
400 x 200 NETLGRBPBZZZ1R7N8A7J NFTLGRBPBZZZ1R7N8A7J RDTLGRBFFZZZ1R7N8A7J
400 x 250 NETLGRBPBZZZ1R7N1K7DNFTLGRBPBZZZ1R7N1K7D NJTLGRBPBZZZ1R7N1K7D
400 x 300 NETLGRBPBZZZ1R7N1M0CNFTLGRBPBZZZ1R7N1M0C NJTLGRBPBZZZ1R7N1M0C
400 x 350 NETLGRBPBZZZ1R7N1P9A NFTLGRBPBZZZ1R7N1P9A NJTLGRBPBZZZ1R7N1P9A
450 x 50 NETLGRBPBZZZ1T0H2A8P NFTLGRBPBZZZ1T0H2A8P RDTLGRBFFZZZ1T0H2A8P
450 x 200 NETLGRBPBZZZ1T0H8A7J NFTLGRBPBZZZ1T0H8A7J RDTLGRBFFZZZ1T0H8A7J
450 x 250 NETLGRBPBZZZ1T0H1K7D NFTLGRBPBZZZ1T0H1K7D NJTLGRBPBZZZ1T0H1K7D
450 x 300 NETLGRBPBZZZ1T0H1M0CNFTLGRBPBZZZ1T0H1M0C NJTLGRBPBZZZ1T0H1M0C
450 x 350 NETLGRBPBZZZ1T0H1P9A NFTLGRBPBZZZ1T0H1P9A NJTLGRBPBZZZ1T0H1P9A
450 x 400 NETLGRBPBZZZ1T0H1R7N NFTLGRBPBZZZ1T0H1R7N NJTLGRBPBZZZ1T0H1R7N
500 x 50 NETLGRBPBZZZ2KA32A8P NFTLGRBPBZZZ2KA32A8P RDTLGRBFFZZZ2KA32A8P
500 x 150 NJTLGRBPBZZZ2KA36A8X
500 x 200 RDTLGRBFFZZZ2KA38A7J
500 x 250 NJTLGRBPBZZZ2KA31K7D
500 x 300 NJTLGRBPBZZZ2KA31M0C
500 x 350 NETLGRBPBZZZ2KA31P9A NFTLGRBPBZZZ2KA31P9A NJTLGRBPBZZZ2KA31P9A
500 x 400 NETLGRBPBZZZ2KA31R7NNFTLGRBPBZZZ2KA31R7N NJTLGRBPBZZZ2KA31R7N
500 x 450 NETLGRBPBZZZ2KA31T0H NFTLGRBPBZZZ2KA31T0H NJTLGRBPBZZZ2KA31T0H
Revision Number : 0
Page : 6 / 7
BLT FOR GRVE TO CS BLT FOR GRVE FLG BLT FOR WFR LG TO CS
50 4 5/8 x 90 BAAAAARY0G0U 50 4 5/8 x 90 BAAAAARY0G0U 50 4 5/8 x 140 BAAAAARY0G1J

80 4 5/8 x 100 BAAAAARY0G1A 80 4 5/8 x 100 BAAAAARY0G1A 80 4 5/8 x 150 BAAAAARY0G1L
100 8 5/8 x 110 BAAAAARY0G1C 100 8 5/8 x 110 BAAAAARY0G1C 100 8 5/8 x 170 BAAAAARY0G1Q
150 8 3/4 x 120 BAAAAARY0H1E 150 8 3/4 x 130 BAAAAARY0H1G 150 8 3/4 x 190 BAAAAARY0H1U
200 8 3/4 x 130 BAAAAARY0H1G 200 8 3/4 x 140 BAAAAARY0H1J 200 8 3/4 x 200 BAAAAARY0H2A
250 12 7/8 x 150 BAAAAARY0J1L 250 12 7/8 x 160 BAAAAARY0J1N 250 12 7/8 x 220 BAAAAARY0J2E
300 12 7/8 x 150 BAAAAARY0J1L 300 12 7/8 x 170 BAAAAARY0J1Q 300 12 7/8 x 240 BAAAAARY0J2J
350 12 1 x 170 BAAAAARY1A1Q 350 12 1 x 190 BAAAAARY1A1U 350 12 1 x 260 BAAAAARY1A2N
400 16 1 x 180 BAAAAARY1A1S 400 16 1 x 200 BAAAAARY1A2A 400 16 1 x 290 BAAAAARY1A2U
450 16 1-1/8 x 190 BAAAAARY1B1U 450 16 1-1/8 x 210 BAAAAARY1B2C 450 16 1-1/8 x 310 BAAAAARY1B3C
500 20 1-1/8 x 200 BAAAAARY1B2A 500 20 1-1/8 x 220 BAAAAARY1B2E 500 20 1-1/8 x 340 BAAAAARY1B3J
Revision Number : 0
Page : 7 / 7
BLT WFR LG TO GRVE

50 4 5/8 x 140 BAAAAARY0G1J

80 4 5/8 x 150 BAAAAARY0G1L
100 8 5/8 x 170 BAAAAARY0G1Q
150 8 3/4 x 190 BAAAAARY0H1U
200 8 3/4 x 200 BAAAAARY0H2A
250 12 7/8 x 230 BAAAAARY0J2G
300 12 7/8 x 260 BAAAAARY0J2N
350 12 1 x 270 BAAAAARY1A2Q
400 16 1 x 310 BAAAAARY1A3C
450 16 1-1/8 x 330 BAAAAARY1B3G
500 20 1-1/8 x 360 BAAAAARY1B3N
P_NOSBL
1N341
PVC-C, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1N341
Revision Number : 0
Page : 2 / 5

TYPE OF MATERIAL : PVC-C
Temperature (oC) -5 60
Pressure (barG)
DN 15 to 150 10 10
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150

NP10 15 - 150 / - NM Pipe, ASTM F441/F441M, PN 10, PE , ASTM D1784, Cell Classification 24448 NPPIPADQDABDKPEZZZZ
Standard Specification for Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride
(CPVC)
Valves, Non-Metallic
NV110 15 - 100 / - Ball Valve FB, ISO 16135, PN 10, T-handle, Chlorinated Poly Vinyl Chloride (PVC-C), NVVBVEFSDACAFJAAFAAAZZZZ
FFFE, Two Piece Body, Floating Ball, Integral (Non-Extented) Bonnet, PTFE/EPDM Trim
NV120 15 - 100 / - Ball Check Valve, ISO 16137, PN 10, Chlorinated Poly Vinyl Chloride (PVC-C), FFFE-, NVVCBEFTDACZAAFAABZZZZ
FPM Trim
NA210 15 - 150 / - Blind Flange, Manufacturer's Standard, PN 10, FFFE , ASTM D1784, Cell Classification NAFLBAMSDAADACZZZZ
23447 – Standard Specification for Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl
Chloride (CPVC)
NA220 15 - 150 / - Flange, Manufacturer's Standard, PN 10, FFFE , ASTM D1784, Cell Classification 23447 – NAFLGAMSDAADACZZZZ
(CPVC)
NA230 15 - 150 / - Spectacle Blind, Manufacturer's Standard, PN 10, FFTBE , ASTM D1784, Cell Classification NASPBAMSDAADFT1AAD
23447 – Standard Specification for Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl
Chloride (CPVC), B16.5
NA240 15 - 150 / - Coupling, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard NACPLACSDAADSEZZZZ
Specification for Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC)
NA250 20 - 150 / 15 - 100 Reducing Coupling, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – NACPRACSDAADSEZZZZ
(CPVC)
NA260 50 - 50 / - Drip Ring, Manufacturer's Standard, CL 150, FFFE , Chlorinated Poly Vinyl Chloride (PVC- NADRGAMSATAAFFFZZZZ
C)
Gaskets
(EPDM), ASME B16.5
Bolts & Nuts
L310 15 - 20 / - Stud Bolt, ASME-B18.2.1/B18.2.2 , ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts, LS1A4GAA1ANAARZ
Coated, 2 Flat Washers
NT400 15 - 150 / - 45 Deg Elbow, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – NTE45ACSDAADSEZZZZ
(CPVC)
NT410 15 - 150 / - 90 Deg Elbow, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – NTE90ACSDAADSEZZZZ
(CPVC)
NT420 15 - 150 / - CAP, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard NTCAPACSDAADSEZZZZ
NT430 15 - 150 / - Equal Tee, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard NTTEEACSDAADSEZZZZ
NT440 20 - 150 / 15 - 100 Reducing Tee, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – NTTERACSDAADSEZZZZ
(CPVC)
Revision Number : 0
Page : 3 / 5

Legend and chart
Branch Table: CLASS1N341_BR Legend:

BRANCH SIZES RT Reducing Tee
150 T T Equal Tee
100 RT T
80 RT RT T
50 RT RT RT T
40 RT RT RT T
25 RT RT RT RT T
20 RT RT RT T
15 RT RT RT RT T
150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
X41 Bolts for C-PVC flanges shall be provided with washers.
X42 C-PVC pipes installed above ground shall be provided with UV protection.
X44 This specification is based on Astral Chempro - Weight & Dimension Technical Manual.
Revision Number : 0
Page : 4 / 5
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150

NP10 PPRDPMAPEZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
Valves, Non-Metallic
NV110 RFRFMPAFFBHRAA ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A
NV120 RERGMPAFFZUJ ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A
NA210 FXTLMRAFFZ ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A
NA220 FTTLMRAFFZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
NA230 SBTLMRAFTZ AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A
NA240 RKRJMRASVZZZ 0F3K 3A3K 4A3K 6A3K
NA240 RKRJMRZSVZZZ 0H3K 1A3K 1F3K 2A3K
NA260 SWTLMPUBVZ ZZ2A
Gaskets
G300 GCARENEFFSA 0F0A 0H0A 1A0A 1F0A 2A0A 3A0A 4A0A 6A0A
NT400 NBRJMRASVZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
NT410 NCRJMRASVZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
NT420 RPRJMRASVZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
NT430 NHRJMRASVZZZ 0F3K 0H3K 1A3K 1F3K 2A3K 3A3K 4A3K 6A3K
Revision Number : 0
Page : 5 / 5
Reducing Component
Run x Branch Reducing Coupling Reducing Tee
20 x 15 CRRJMRASVZZZ0H3K0F3K NJRJMRASVZZZ0H3K0F3K
25 x 15 CRRJMRASVZZZ1A3K0F3K NJRJMRASVZZZ1A3K0F3K
25 x 20 CRRJMRASVZZZ1A3K0H3KNJRJMRASVZZZ1A3K0H3K
40 x 15 CRRJMRASVZZZ1F3K0F3K NJRJMRASVZZZ1F3K0F3K
40 x 20 CRRJMRASVZZZ1F3K0H3K NJRJMRASVZZZ1F3K0H3K
40 x 25 CRRJMRASVZZZ1F3K1A3K NJRJMRASVZZZ1F3K1A3K
50 x 20 CRRJMRASVZZZ2A3K0H3KNJRJMRASVZZZ2A3K0H3K
50 x 25 CRRJMRASVZZZ2A3K1A3KNJRJMRASVZZZ2A3K1A3K
80 x 15 CRRJMRASVZZZ3A3K0F3K
80 x 20 CRRJMRASVZZZ3A3K0H3K
BLT FOR CT BLD SPC

15 4 1/2 x 100 BAACAAAP0F1A

25 4 1/2 x 110 BAACAAAP0F1C
40 4 1/2 x 110 BAACAAAP0F1C
50 4 5/8 x 120 BAACAAAP0G1E
80 4 5/8 x 130 BAACAAAP0G1G
100 8 5/8 x 150 BAACAAAP0G1L
150 8 3/4 x 170 BAACAAAP0H1Q
BLT FOR CT STD FLG

15 4 1/2 x 90 BAACAAAP0F0U
20 4 1/2 x 90 BAACAAAP0F0U
50 4 5/8 x 110 BAACAAAP0G1C
80 4 5/8 x 120 BAACAAAP0G1E
100 8 5/8 x 130 BAACAAAP0G1G
150 8 3/4 x 150 BAACAAAP0H1L
P_NOSBL
1S341
Stainless Steel AISI 316/316L, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Piping Material Specification Line Class : 1S341
Revision Number : 0
Page : 2 / 6

TYPE OF MATERIAL : 316/316L
Temperature (oC) -20 0 50 100 150 200
Pressure (barG)
DN 15 to 300 19.0 19.0 18.4 16.2 14.8 13.7
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300
Schedule S-40S S-40S S-10S S-10S S-10S S-10S S-10S S-10S S-10S S-10S S-10S

Pipes & Tubes
P8 15 - 300 / - Pipe, ASME B36.19M, BE, ASTM A312 Grade TP316/TP316L, Seamless PPPABRBEAWDAAGZ
P15 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 75mm Long, PPNABRPGAWDACAZ
Seamless
P25 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 100mm Long, PPNABRPGAWDACBZ
Seamless
P35 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 150mm Long, PPNABRPGAWDACCZ
Seamless
Butterfly Valves
VY110 80 - 300 / - Bfly Vlv Off Triple, API 609 Cat B, CL 150, RF, Bolted Cover Bonnet, Bevel Gear Operator, VYSAA2DRF2AAR93BXZZZZ
ASTM A351-CF8M, SS, Duplex, Stellite Trim, Graphite Seals, ASTM A193 Grade B8M
Class 1 Bolts/Studs, ASTM A194 Grade 8M Nuts
Check Valves
VC130 15 - 40 / - Piston Chk Vlv RB, API 602, CL 150, RF, Bltd Bonnet, ASTM A182 Grade F 316, AISI VC1BAA5DRFAARQ2BWZZZZ
316, Stellite 6 Trim, ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts
VC145 50 - 300 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A351-CF8M , AISI 316, VCSCBWDDRFAAR92BZZZZZ
Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs, ASTM A194
Grade 8M Nuts
Gate Valves
VG150 15 - 40 / - Gate Vlv RB, API 602, CL 150, RF, Bltd Bonnet, Handwheel, ASTM A182 Grade F 316, VG3AA5DRFAFARQBBDZZZZ
Grade 2H Nuts
VG165 50 - 50 / - Gate Vlv FB, API 600, CL 150, RF, Bltd Bonnet, Handwheel , ASTM A351-CF8M, AISI VGRAA4DRFAFAR92BZZZZZZ
A194 Grade 8M Nuts
Flanges
F326 15 - 300 / - WN Flg., ASME B16.5, CL 300, RFFE , ASTM A182 Grade F 316/F 316L FWNABLIRFAWFZZZZ
F327 15 - 300 / - WN Flg., ASME B16.5, CL 150, RFFE , ASTM A182 Grade F 316/F 316L, With Jack FWNABLDRFAWFDABZ
Screws
F340 100 - 300 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 300, RFFE, ASTM A182 Grade F 316/F 316L FO2ABDIRFAWFZZZZ
BW Fittings
B405 15 - 300 / - 45 Deg. LR Elbow, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BE4LABMBEAYYABAZ
B420 15 - 300 / - Cap, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BCAPABMBEAYYABAZ
B430 20 - 300 / 15 - 250 Con. Reducer, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BRECABMBEAYYABAZ
B440 20 - 300 / 15 - 250 Ecc. Reducer, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BREEABMBEAYYABAZ
B450 15 - 300 / - Equal Tee, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BTEEABMBEAYYABAZ
B460 20 - 300 / 15 - 250 Red. Tee, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BTERABMBEAYYABAZ
B476 150 - 300 / 50 - 100 Weldolet, MSS SP-97, BE , ASTM A182 Grade F 316/F 316L BWELAM9BEAWFZZZZ
Forged Fittings
O505 40 - 300 / 15 - 40 Nippolet, MSS SP-97, BE , ASTM A182 Grade F 316/F 316L O1ABAM9BEAWFZZZZ
D12.92.331-C
Gaskets
Bolts & Nuts
Coated
D735 50 - 50 / - Drip Ring, Manufacturer's Standard, CL 150, RFFE , ASTM A182 Grade F 316/F 316L DDRA1CDRFAWFZZZZ
Revision Number : 0
Page : 3 / 6

Legend and chart
Branch Table: CLASS1S341_BR Legend:

300 T E Red. Tee
250 E T T Equal Tee
150 E E E T
100 W E E E T
80 W W W E E T
50 W W W W E E T
40 A A A A A A E T
300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
Revision Number : 0
Page : 4 / 6
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300
Pipes & Tubes

P8 PAAUDVZBEEX 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
P15 PNAUDVZPEEA 0F3H 0H3H
P25 PNAUDVZPEEB 0F3H 0H3H
P35 PNAUDVZPEEC 0F3H 0H3H
Butterfly Valves
VY110 LJBUBUERFADBPE ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
Check Valves
VC130 LKBEBVERFAJDL ZZ0F ZZ0H ZZ1A ZZ1F
VC145 LNBBBUERFAJEX ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
Gate Valves
VG150 VJBJBVERFAJERB ZZ0F ZZ0H ZZ1A ZZ1F
VG165 VQBHBUERFAJEJC ZZ2A
Flanges
F305 FEALDVERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M
F314 FFALDCEFLBZ 0F3H
F323 FFALDCEFLBZ 1F3C
F325 FLALDVERFZZ 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
F326 FLALDVFRFZZ 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
F327 FLALDVERFCG 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
F340 FGAJDVFRFZZ 4A3C 6A3C 8A3C 1K3C 1M3C
BW Fittings
B405 NBAFLNBEAN 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
B410 NCAFLNBEAN 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
B420 NAAFLNBEAN 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
B450 NHAFLNBEAN 0F3H 0H3H 1A3C 1F3C 2A3C 3A3C 4A3C 6A3C 8A3C 1K3C 1M3C
Gaskets
D730 FCAMUUERT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M
D735 WRAJDVERF ZZ2A
Revision Number : 0
Page : 5 / 6
Reducing Component
20 x .5 NEAFLNBEAN0H3H0F3H NFAFLNBEAN0H3H0F3H NJAFLNBEAN0H3H0F3H

25 x .5 NEAFLNBEAN1A3C0F3H NFAFLNBEAN1A3C0F3H NJAFLNBEAN1A3C0F3H
25 x .75 NEAFLNBEAN1A3C0H3H NFAFLNBEAN1A3C0H3H NJAFLNBEAN1A3C0H3H
40 x .5 NEAFLNBEAN1F3C0F3H NFAFLNBEAN1F3C0F3H
40 x .75 NEAFLNBEAN1F3C0H3H NFAFLNBEAN1F3C0H3H NJAFLNBEAN1F3C0H3H
40 x 1 NEAFLNBEAN1F3C1A3C NFAFLNBEAN1F3C1A3C NJAFLNBEAN1F3C1A3C
40 x 15 NMAGDVERF6N1F0F3H NNAGDVBEZZ1F3C0F3H
50 x .75 NEAFLNBEAN2A3C0H3H NFAFLNBEAN2A3C0H3H
50 x 1 NEAFLNBEAN2A3C1A3C NFAFLNBEAN2A3C1A3C NJAFLNBEAN2A3C1A3C
50 x 1.5 NEAFLNBEAN2A3C1F3C NFAFLNBEAN2A3C1F3C NJAFLNBEAN2A3C1F3C
50 x 15 NMAGDVERF6N2A0F3H NNAGDVBEZZ2A3C0F3H
50 x 20 NMAGDVERF6N2A0H3H NNAGDVBEZZ2A3C0H3H
80 x 1.5 NEAFLNBEAN3A3C1F3C NFAFLNBEAN3A3C1F3C
80 x 25 NMAGDVERF6N3A1A3C NNAGDVBEZZ3A3C1A3C
80 x 40 NMAGDVERF6N3A1F3C NNAGDVBEZZ3A3C1F3C
100 x 1.5 NEAFLNBEAN4A3C1F3C NFAFLNBEAN4A3C1F3C
250 x 4 NEAFLNBEAN1K3C4A3C NFAFLNBEAN1K3C4A3C NJAFLNBEAN1K3C4A3C
250 x 15 NMAGDVERF6N1K0F3H NNAGDVBEZZ1K3C0F3H
250 x 20 NMAGDVERF6N1K0H3H NNAGDVBEZZ1K3C0H3H
250 x 25 NMAGDVERF6N1K1A3C NNAGDVBEZZ1K3C1A3C
250 x 40 NMAGDVERF6N1K1F3C NNAGDVBEZZ1K3C1F3C
300 x 6 NEAFLNBEAN1M3C6A3C NFAFLNBEAN1M3C6A3C NJAFLNBEAN1M3C6A3C
300 x 8 NEAFLNBEAN1M3C8A3C NFAFLNBEAN1M3C8A3C NJAFLNBEAN1M3C8A3C
300 x 10 NEAFLNBEAN1M3C1K3C NFAFLNBEAN1M3C1K3C NJAFLNBEAN1M3C1K3C
300 x 15 NMAGDVERF6N1M0F3H NNAGDVBEZZ1M3C0F3H
300 x 20 NMAGDVERF6N1M0H3H NNAGDVBEZZ1M3C0H3H
300 x 25 NMAGDVERF6N1M1A3C NNAGDVBEZZ1M3C1A3C
300 x 40 NMAGDVERF6N1M1F3C NNAGDVBEZZ1M3C1F3C
Revision Number : 0
Page : 6 / 6
BLT FOR CT BLD SPC BLT FOR CT STD FLG


50 4 5/8 x 100 BAACAAAB0G1A 50 4 5/8 x 90 BAACAAAB0G0U
80 4 5/8 x 110 BAACAAAB0G1C 80 4 5/8 x 100 BAACAAAB0G1A
100 8 5/8 x 120 BAACAAAB0G1E 100 8 5/8 x 100 BAACAAAB0G1A
200 8 3/4 x 140 BAACAAAB0H1J 200 8 3/4 x 110 BAACAAAB0H1C
250 12 7/8 x 150 BAACAAAB0J1L 250 12 7/8 x 120 BAACAAAB0J1E
300 12 7/8 x 160 BAACAAAB0J1N 300 12 7/8 x 120 BAACAAAB0J1E
BLT FOR CT ORI FLG

50 8 5/8 x 130 BAACAAAB0G1G

80 8 3/4 x 140 BAACAAAB0H1J
100 8 3/4 x 150 BAACAAAB0H1L
150 12 3/4 x 150 BAACAAAB0H1L
200 12 7/8 x 170 BAACAAAB0J1Q
P_NOSBL
1S342
Stainless Steel AISI 316/316L, Class 150
Revision: 0
FOREWORD
the PETRONAS group.
Revision Number : 0
Page : 2 / 5

TYPE OF MATERIAL : 316/316L
Pressure (barG)
DN 15 to 100 19.0 19.0 18.4 16.2
Size/Schedule
Size (DN) 15 20 25 40 50 80 100
Schedule S-40S S-40S S-40S S-40S S-10S S-10S S-10S

Pipes & Tubes
P8 15 - 100 / - Pipe, ASME B36.19M, BE, ASTM A312 Grade TP316/TP316L, Seamless PPPABRBEAWDAAGZ
P15 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 75mm Long, PPNABRPGAWDACAZ
Seamless
P25 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 100mm Long, PPNABRPGAWDACBZ
Seamless
P35 15 - 40 / - Pipe Nipple, ASME B36.19M, PE, ASTM A312 Grade TP316/TP316L, 150mm Long, PPNABRPGAWDACCZ
Seamless
Ball Valves
VB90 15 - 40 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLEAADRF8CARQCFAGKPZZ
Lever , ASTM A182 Grade F 316, AISI 316, PTFE Trim, Thermoplastic Seals, ASTM A193
Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Cavity Pressure Relief
VB95 50 - 80 / - Ball Vlv LP FB, ISO 17292, CL 150, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLEAADRF8CAR9CFAGKPZZ
Lever , ASTM A351-CF8M, AISI 316, PTFE Trim, Thermoplastic Seals, ASTM A193 Grade
B7 Bolts/Studs, ASTM A194 Grade 2H Nuts, Cavity Pressure Relief
Check Valves
VC100 15 - 40 / - Piston Chk Vlv RB , API 602 , CL 150, RF , Bltd Bonnet , ASTM A182 Grade F 316 , AISI VC1BAA5DRFAARQCFGGCAZZ
316, Stellite 6 Trim, Thermoplastic Seals, ASTM A193 Grade B7M Bolts/Studs, ASTM
A194 Grade 2HM Nuts , ASME B16.10, ASME B16.5
VC105 50 - 80 / - Swing Chk Vlv , BS 1868 , CL 150, RF , Bltd Bonnet , ASTM A351-CF8M , AISI 316, VCSCBWDDRFAAR9CFHGKFZZ
Stellite 6 Trim, Thermoplastic Seals, ASTM A193 Grade B8M Class 1 Bolts/Studs, ASTM
A194 Grade 8M Nuts , ASME B16.10, ASME B16.5
Flanges
BW Fittings
B420 15 - 100 / - Cap, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BCAPABMBEAYYABAZ
B430 20 - 100 / 15 - 80 Con. Reducer, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BRECABMBEAYYABAZ
B440 20 - 100 / 15 - 80 Ecc. Reducer, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BREEABMBEAYYABAZ
B450 15 - 100 / - Equal Tee, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BTEEABMBEAYYABAZ
B460 20 - 100 / 15 - 80 Red. Tee, ASME B16.9, BE , ASTM A403 Grade WP316/WP316L, Seamless BTERABMBEAYYABAZ
Forged Fittings
O505 40 - 100 / 15 - 40 Nippolet, MSS SP-97, BE , ASTM A182 Grade F 316/F 316L O1ABAM9BEAWFZZZZ
D12.92.331-C
Gaskets
G610 15 - 100 / - Spiral Wound Gskt, ASME B16.20, CL 150, RF , AISI 316, ASME B16.5, PTFE Filled SS GSWABADRFA1AXGKSZ
Bolts & Nuts
Coated
D735 50 - 50 / - Drip Ring, Manufacturer's Standard, CL 150, RFFE , ASTM A182 Grade F 316/F 316L DDRA1CDRFAWFZZZZ
Revision Number : 0
Page : 3 / 5

Legend and chart
Branch Table: CLASS1S342_BR Legend:

100 T E Red. Tee
80 E T T Equal Tee
50 E E T
40 A A E T
25 A A E E T
20 A A A E E T
15 A A A A E E T
100 80 50 40 25 20 15
RUN SIZES
NOTES:
Revision Number : 0
Page : 4 / 5
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100
Pipes & Tubes

P8 PAAUDVZBEEX 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
P15 PNAUDVZPEEA 0F3H 0H3H 1A3H 1F3H
P25 PNAUDVZPEEB 0F3H 0H3H 1A3H 1F3H
P35 PNAUDVZPEEC 0F3H 0H3H 1A3H 1F3H
Ball Valves
VB90 VEAVDRERFAZC8A SC0F SC0H SC1A SC1F
VB95 VEAVBUERFAZC8A SC2A SC3A
Check Valves
VC100 LKBEDRERFAJ6B KJ0F KJ0H KJ1A KJ1F
VC105 LNBBBUERFAJ7B JE2A JE3A
Flanges
F305 FEALDVERF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A
F325 FLALDVERFZZ 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
BW Fittings
B405 NBAFLNBEAN 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
B410 NCAFLNBEAN 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
B420 NAAFLNBEAN 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
B450 NHAFLNBEAN 0F3H 0H3H 1A3H 1F3H 2A3C 3A3C 4A3C
Gaskets
G610 GEASDUERFNQ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D
D730 FCAMUUERT AR0F AR0H AR1A AR1F AR2A AR3A
D735 WRAJDVERF ZZ2A
Revision Number : 0
Page : 5 / 5
Reducing Component
20 x .5 NEAFLNBEAN0H3H0F3H NFAFLNBEAN0H3H0F3H NJAFLNBEAN0H3H0F3H

25 x .5 NEAFLNBEAN1A3H0F3H NFAFLNBEAN1A3H0F3H NJAFLNBEAN1A3H0F3H
25 x .75 NEAFLNBEAN1A3H0H3H NFAFLNBEAN1A3H0H3H NJAFLNBEAN1A3H0H3H
40 x .5 NEAFLNBEAN1F3H0F3H NFAFLNBEAN1F3H0F3H
40 x .75 NEAFLNBEAN1F3H0H3H NFAFLNBEAN1F3H0H3H NJAFLNBEAN1F3H0H3H
40 x 1 NEAFLNBEAN1F3H1A3H NFAFLNBEAN1F3H1A3H NJAFLNBEAN1F3H1A3H
40 x 15 NMAGDVERF6N1F0F3H NNAGDVBEZZ1F3H0F3H
50 x .75 NEAFLNBEAN2A3C0H3H NFAFLNBEAN2A3C0H3H
50 x 1 NEAFLNBEAN2A3C1A3H NFAFLNBEAN2A3C1A3H NJAFLNBEAN2A3C1A3H
50 x 1.5 NEAFLNBEAN2A3C1F3H NFAFLNBEAN2A3C1F3H NJAFLNBEAN2A3C1F3H
80 x 1.5 NEAFLNBEAN3A3C1F3H NFAFLNBEAN3A3C1F3H
80 x 25 NMAGDVERF6N3A1A3H NNAGDVBEZZ3A3C1A3H
100 x 1.5 NEAFLNBEAN4A3C1F3H NFAFLNBEAN4A3C1F3H
100 x 25 NMAGDVERF6N4A1A3H NNAGDVBEZZ4A3C1A3H
BLT FOR CT BLD SPC

100 8 5/8 x 120 BAACAAAB0G1E
BLT FOR CT STD FLG

100 8 5/8 x 100 BAACAAAB0G1A
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 6 - ASSEMBLY DETAILS FOR SCOPE 2
Open
APPENDIX - 6
TABLE A - VENTS & DRAINS CONNECTIONS
Branch DN 15 Branch DN 20 Branch DN 25 Branch DN 40 Branch DN 50

Sl. No. PIPING CLASS
Header Header Header DN Header DN Header Header Header DN 80 - Header Header DN 350 - Header DN 50-
DN 15 DN 15-25 20-40 40-50 DN 50 DN 25-50 Largest Size DN 80-300 Largest Size Largest Size
1 1C103EE Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
4 1C127EE - - - - - Fig. I Fig. H - - -
6 1C136EF - - - - - - - - - -
7 1C136EG Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
8 1G100EE - Fig. A - Fig. A - - Fig. A - - -
9 1G340 - Fig. A - Fig. A - - Fig. A - - -
10 1N103EE - - - - - - - - - -
11 1N341 - - - - - - - - - -
12 1S341 Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
13 1S342 Fig. I - Fig. I - Fig. H - - Fig. H Fig. H -
VENT CONNECTIONS
Fig. A: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded cap
Fig. I: Butt weld end branch connection in accordance with the branch table, weld neck flange, blind flange
DRAIN CONNECTIONS
Fig H: Flanged branch connection in accordance with the branch table (e.g. branch nipple flanged), blind flange
APPENDIX - 6
TABLE B - PRESSURE INSTRUMENT, METER RUN & ORIFICE CONNECTIONS (REMOTE MOUNTING)
Meter Run DN 15 Orifice DN 15 Pressure Instrument DN 15

Sl. Pressure Instr.
PIPING CLASS
No. DN 50 (Header
Header DN 50 - Header DN 15- Header DN 40-Largest Header DN 80 -
Header DN 15-40 Header DN 15-25 Header DN 15-50 DN 50-350)
Largest Size Largest Size Size Largest Size
1 1C103EE Fig. 3H Fig. 3I Fig. 3J - - Fig. 3H - -
4 1C127EE - - - - - - - -
6 1C136EF - - - - - - - -
7 1C136EG Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
8 1G100EE - - - Fig. 6C - - Fig. 6D -
9 1G340 - - - Fig. 6C - - Fig. 6D -
10 1N103EE - - - - - - - -
11 1N341 - - - - - - - -
12 1S341 Fig. 0H Fig. 0I Fig. 0J - - Fig. 0H - -
13 1S342 Fig. 3H Fig. 3I Fig. 3J - - Fig. 3H - -
For Meter Run
Fig. 0H: Branch n/a, flanged gate valves, lap joint flanges
Fig. 2H: Branch n/a, flanged reduced bore ball valves, lap joint flanges
Fig. 3H: Branch n/a, flanged full bore ball valves, lap joint flanges
Fig. 0I: Branch n/a, BW gate valves, welding neck flanges, lap joint flanges
For Orifice
Fig. 0I: Branch n/a, welding neck flanges, flanged gate valves, lap joint flanges
Fig. 2I: Branch n/a, welding neck flanges, flanged reduced bore ball valves, lap joint flanges
Fig. 3I: Branch n/a, welding neck flanges, flanged full bore ball valves, lap joint flanges
Fig. 0M: Branch n/a, BW gate valves, welding neck flanges, lap joint flanges
Fig. 3M: Branch n/a, BW Ball valves, welding neck flanges, lap joint flanges
Fig. 6C: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded ball valve, threaded flange, lap joint
flange
Fig. 6D: Threaded end branch connection in accordance with the branch table, threaded ball valve, pipe nipple threaded ends, threaded flange, lap joint
flange
Fig. 0H: Branch nipple flanged, flanged gate valve, lap joint flange
Fig. 2H: Branch nipple flanged, flanged reduced bore ball valve, lap joint flange
Fig. 3H: Branch nipple flanged, flanged full bore ball valve, lap joint flange
Fig. 0J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged gate valve, lap joint flange
Fig. 2J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged reduced bore ball valve, lap joint flange
Fig. 3J: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged full bore ball valve, lap joint flange
Fig. 0N: Butt weld end branch connection in accordance with the branch table, pipe, BW gate valve, welding neck flange, lap joint flange
Fig. 3N: Butt weld end branch connection in accordance with the branch table, pipe, BW Ball valve, welding neck flange, lap joint flange
APPENDIX - 6
TABLE C - PRESSURE INSTRUMENT, METER RUN & ORIFICE CONNECTIONS (DIRECT MOUNTING)
Sl. Meter Run DN 15 Orifice DN 15 Pressure Instrument DN 15

PIPING CLASS Pressure Instr. DN
No.
Header DN 50 - Header DN 15- Header DN 40- Header DN 80 - 50 (Header DN 50-
Header DN 15-40 Header DN 15-25 Header DN 15-50 350)
Largest Size Largest Size Largest Size Largest Size
1 1C103EE Fig. 3G Fig. 3J Fig. 3K - - Fig. 3G - NOTE 3Z
2 1C108EE Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
4 1C127EE - - - - - - - NOTE 3Z
6 1C136EF - - - - - - - -
7 1C136EG Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
8 1G100EE - - - Fig. 6E - - Fig. 6F -
9 1G340 - - - Fig. 6E - - Fig. 6F -
10 1N103EE - - - - - - - -
11 1N341 - - - - - - - -
12 1S341 Fig. 0G Fig. 0J Fig. 0K - - Fig. 0G - -
13 1S342 Fig. 3G Fig. 3J Fig. 3K - - Fig. 3G - NOTE 3Z

For Meter Run
Fig. 0G: Branch n/a, flanged gate valves

Fig. 2G: Branch n/a, flanged reduced bore ball valves
Fig. 3G: Branch n/a, flanged full bore ball valves
Fig. 0J: Branch n/a, BW gate valves, welding neck flanges
For Orifice
Fig. 0J: Branch n/a, welding neck flanges, flanged gate valves
Fig. 2J: Branch n/a, welding neck flanges, flanged reduced bore ball valves
Fig. 3J: Branch n/a, welding neck flanges, flanged full bore ball valves
Fig. 0N: Branch n/a, BW gate valves, welding neck flanges

Fig. 3N: Branch n/a, BW Ball valves, welding neck flanges
Fig. 6E: Threaded end branch connection in accordance with the branch table, pipe nipple threaded ends, threaded ball valve, threaded flange
Fig. 6F: Threaded end branch connection in accordance with the branch table, threaded ball valve, pipe nipple threaded ends, threaded flange
Fig. 0G: Branch nipple flanged, flanged gate valve

Fig. 2G: Branch nipple flanged, flanged reduced bore ball valve
Fig. 3G: Branch nipple flanged, flanged full bore ball valve
Fig. 0K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged gate valve
Fig. 2K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged reduced bore ball valve
Fig. 3K: Butt weld end branch connection in accordance with the branch table, pipe, welding neck flange, flanged full bore ball valve
Fig. 0Q: Butt weld end branch connection in accordance with the branch table, pipe, BW gate valve, welding neck flange
Fig. 3Q: Butt weld end branch connection in accordance with the branch table, pipe, BW RB Ball valve, welding neck flange
Note 0Z: Branch Connection for DN50 Diaphragm seal Pressure Instrument in accordance to the branch table, Flanged nipple, Flanged Gate Valve
Note 3Z:Branch Connection for DN50 Diaphragm seal Pressure Instrument in accordance to the branch table, Flanged nipple, Flanged Full Bore Ball Valve
APPENDIX - 6
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF TITANIUM NBL

OUTSIDE BATTERY LIMIT (N-OSBL) FACILITY PROJECT FOR PENGERANG INTEGRATED COMPLEX
TABLE D - TEMPERATURE INSTRUMENT CONNECTIONS

Sl. Temperature Instrument DN 40
PIPING CLASS
No.
Fig. NL: Branch nipple flanged, thermowell flanged
Header DN 80-100 Header DN 150 - Largest Size
(L = 255mm), lap joint flange
1 1C103EE Fig. NS Fig. NL
4 1C127EE - -
6 1C136EF - -
7 1C136EG Fig. NS Fig. NL
8 1G100EE Fig. NS -
9 1G340 Fig. NS -
Fig. NS: Branch nipple flanged, thermowell flanged
10 1N103EE - -
(L = 230mm), lap joint flange
11 1N341 - -
12 1S341 Fig. NS Fig. NL
13 1S342 Fig. NS Fig. NL

OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 7 - GASKET LIST (COMMON)
Open
APPENDIX-7
GASKET LIST
REV. 0 PRPC TITANIUM NOSBL

Doc. No. TOSP-P038-EXE-DEC-0001-PIP-SPN-0001
ISSUED 17-Jun-'22 PAGE 1 OF 2
GASKET CONDITION R
PIPING CLASS E
Gasket No. TYPE SPECIFICATIONS STANDARD SERVICE CLASS MAX./ MIN.
TEMP. (C) V
G111C Non-metallic Rubber Sheet Gasket ASME ACCIDENTALLY CHEMICALLY, CHILLED WATER RETURN, CL.150 100/ -5 1C136DH, 1C136EE,
Gasket EPDM: Ethylene propylene diene Monomer B16.21 CHILLED WATER SUPPLY, COAGULANT-FESO4, FIRE WATER, 1C136EF, 1N103DF,
rubber FIRE WATER (ABOVEGROUND), FIRE WATER 1N103EE, 1N341,
(UNDERGROUND), FIRE WATER ABOVEGROUND,
FLOCCULANT, NUTRIENT, PROCESS AIR, PROCESS WASTE
WATER, SERVICE WATER, SLUDGE (UNDERGROUND),
SUPERNATANT, TEATED EFFLUENT, TREATED WATER, VENT
GAS
G121 Non-metallic Non-asbestos Sheet Gasket ASME INSTRUMENT AIR CL.150, 75/ 0 1G304
Gasket General Use (Design Temperature =< 100 B16.21 CL.300
degC)
G141 Non-metallic PTFE Sheet Gasket ASME CAUSETIC SODA; SULPHURIC ACID 98% CL.150, 150/ 0 1C103EE, 1C127EE
Gasket B16.21 CL.300,
CL.600
G142C Non-metallic PTFE Sheet Gasket ASME POTABLE WATER CL.150, 90/ 0 1G100DF
Gasket PTFE sheet gasket with compound Carbon B16.21 CL.300
Fiber
G214ACN Semi-metallic Spiral Wound Gasket with Inner and ASME ACC OFF-SPEC, ACC ON-SPEC, ACCIDENTALLY CL.150, 400/ -46 1C108DF, 1C108DG,
Gasket Centering Rings B16.20 CHEMICALLY, CHILLED WATER RETURN, CHILLED WATER CL.300, 1C108EE, 1C114DF,
Filler Material: Graphite Tape SUPPLY, DEMIN WATER, FIRE WATER (ABOVEGROUND), CL.600 1C114EE,
Winding Material: 316 SS FIRE WATER (UNDERGROUND), FUEL GAS, INSTRUMENT 1C119DF-20,
Inner Ring Material: 316 SS AIR, LIGHT SLOP OIL, LP NITROGEN, LP STEAM, PETCHEM 1C136DF, 1C136DG,
Centering Ring Material: Carbon Steel FLARE, PLANT AIR, POTABLE WATER, PROCESS AIR, 1C136EE, 1C136EF,
PROCESS WASTE WATER, SERVICE WATER, SLUDGE, 1C136EG, 1C139DF,
SLUDGE (UNDERGROUND), SUPERNATANT, TEATED 1G100EE, 1G304,
EFFLUENT, TREATED WATER, TREATED WATER - GENERAL, 1G340, 1S105DF,
UTILITY EFFLUENT - BLOWDOWN, UTILITY EFFLUENT - C/T 1S341
BACKWASH, VENT GAS
APPENDIX-7
GASKET LIST
REV. 0 PRPC TITANIUM NOSBL

Doc. No. TOSP-P038-EXE-DEC-0001-PIP-SPN-0001
ISSUED 17-Jun-'22 PAGE 2 OF 2
GASKET CONDITION R
PIPING CLASS E
Gasket No. TYPE SPECIFICATIONS STANDARD SERVICE CLASS MAX./ MIN.
TEMP. (C) V
G214CCD Semi-metallic Spiral Wound Gasket with Inner and ASME HYDROGEN PEROXIDE CL.150 100/ -20 1S342
Gasket Centering Rings B16.20
Filler Material: PTFE Tape
Winding Material: 316 SS
Inner Ring Material: 316 SS
Centering Ring Material: 316 SS
G312GF Metallic Gasket Metal Solid Gasket Serrated Type ASME ACCIDENTALLY CHEMICALLY, BUTADIENE, CHILLED WATER CL.150, 400/ -46 1C119DF-20,
316 SS, Graphite Sheet, B16.20 RETURN, CHILLED WATER SUPPLY, FIRE WATER CL.300 1C136EE, 1C136EF,
Max. Hardness 160 BHN (ABOVEGROUND), FIRE WATER (UNDERGROUND), LP 1C139DF,
STEAM, PETCHEM FLARE, PROCESS WASTE WATER, 3C102DF-KS
SERVICE WATER, SLUDGE (UNDERGROUND),
SUPERNATANT, TEATED EFFLUENT, TREATED WATER, VENT
GAS
G312HF Metallic Gasket Metal Solid Gasket Serrated Type ASME ACRYLONITRILE CL.150, 200/ -20 1C101DF
316L SS, Graphite Sheet, B16.20 CL.300
Max. Hardness 150 BHN
OWNER Doc No. :
INTEGRATED COMPLEX
APPENDIX 8 - PROJECT SPECIFICATION CARBON STEEL PIPING AND EQUIPMENT

IN “WET H2S” SERVICE
Open
Document Number
5HY 3DJH
'RF
3URMHFW 3DFNDJH 2ULJLQDWRU 'LVFLSOLQH 8QLWQ 6HULDOQ
7\SH

5$3,' 3 28, 0&, 631
3(7521$65$3,'352-(&7
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7
+6´6(59,&(
2:1(5$SSURYDO 353&8WLOLWLHVDQG)DFLOLWLHV6GQ%KG
1DPH
'DWH ''000<<
RAJ RAO
6LJQDWXUH 2015.02.18
16:13:18 +08'00'
'RFXPHQW&ODVV =
3DJHVPRGLILHGXQGHUWKLVUHYLVLRQ
Gert J Smit
2015.02.16 2015.02.16 2015.02.16
14:57:45 +08'00' 14:51:44 +08'00' 19:01:20 +08'00'
)(% ,)(± ,VVXHGIRU([HFXWLRQ 6ZDSQLO. $$JXLQDOGR,,, *6PLW

'$7( :5,77(1%< &+(&.('%< $33529('%<
5(9 67$786± 5(9,6,210(02
''000<< QDPH VLJQDWXUH QDPH VLJQDWXUH QDPH VLJQDWXUH
6HFWLRQVFKDQJHGLQODVWUHYLVLRQDUHLGHQWLILHGE\DYHUWLFDOOLQHLQWKHULJKWPDUJLQ
,QDFFRUGDQFHZLWK$UWLFOHRIWKH8,2(3&0&RQWUDFWWKHRZQHUVKLSLQWKLVGRFXPHQWVKDOOYHVWLQ2:1(51RSDUWRIWKLVGRFXPHQWPD\EHUHSURGXFHGVWRUHGLQD
UHWULHYDOV\VWHPRUWUDQVPLWWHGLQDQ\IRUPRUE\DQ\PHDQVHOHFWURQLF PHFKDQLFDOSKRWRFRS\LQJUHFRUGLQJRURWKHUZLVHZLWKRXWWKHSHUPLVVLRQRIWKH2:1(5
&21),'(17,$/± 1RWWRGLVFORVHZLWKRXWDXWKRUL]DWLRQ´
(OHFWURQLF)LOHQDPH5$3,'328,0&,631BGRF[
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
+2/'¶V
+2/'1R 5() '(6&5,37,21 $&7,216
UHWULHYDOV\VWHPRUWUDQVPLWWHGLQDQ\IRUPRUE\DQ\PHDQVHOHFWURQLFPHFKDQLFDOSKRWRFRS\LQJUHFRUGLQJRURWKHUZLVHZLWKRXWWKHSHUPLVVLRQRIWKH2:1(5
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
7$%/(2)&217(176
385326(
5()(5(1&('2&80(176
$&521<0$1''(),1,7,216
&2'(6$1'67$1'$5'6
$33/,&$%/(&2'(6 67$1'$5'6
25'(52)35(&('(1&(
6(59,&(6800$5<
3,3,1*
(48,30(17
0$7(5,$/6
*(1(5$/
3/$7(
6($0/(663,3($1'6($0/(663,3(),77,1*6
:(/'('3,3($1':(/'('3,3(),77,1*6)25(48,30(17$1'3,3,1*
)25*,1*6
&$67,1*6
(;&+$1*(578%,1*
%2/7,1*
0$7(5,$/&(57,),&$7,21)253/$7(6
)$%5,&$7,212)35(6685(5(7$,1,1*&20321(176$1'(48,30(176
35(6685(5(7$,1,1*(48,30(17'(6,*1
)250,1*
:(/',1*352&('85(48$/,),&$7,216
6833/(0(17$5<:(/',1*352&(665(48,5(0(176
:(/',1*&21680$%/(6
35(+($7
352'8&7,217(67:(/' &283216
:(/',1*2)',66,0,/$50$7(5,$/
3267:(/'+($775($70(173:+7
35(6685(9(66(/6
3,3,1*6<67(035()$%5,&$7,21 $1'$66(0%/<
3:+7352&('85(
121'(6758&7,9((;$0,1$7,21
35(6685(9(66(/6
+$5'1(667(67,1*
$33(1',;+,&7(67,1*352&('85(
5()(5(1&(352&('85(
7(6763(&,0(1/2&$7,21
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
$&&(37$1&(&5,7(5,$

5(3257,1*
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
385326(
3(7521$6 LQWHQGV WR EXLOG D JUDVV URRW LQWHJUDWHG 5HILQHU\ DQG 3HWURFKHPLFDOV
&RPSOH[ E\ GHYHORSLQJ WKH 5$3,' 352-(&7 5HILQHU\ DQG 3HWURFKHPLFDO ,QWHJUDWHG
'HYHORSPHQW WR PHHW ERWK GRPHVWLF DQG $VLD
V HQHUJ\ DQG FKHPLFDOV GHPDQG 7KH 5$3,'
352-(&7 FRQVLVWV RI D ZRUOG VFDOH LQWHJUDWHG VLWH ZKLFK LQFOXGHV 5HILQHU\ ZLWK D GHHS
FRQYHUVLRQVFKHPHEDUUHOVSHUVWUHDPGD\FDSDFLW\1DSKWKD6WHDP&UDFNHURI
PLOOLRQWRQVRIHWK\OHQHSHU\HDUFDSDFLW\3HWURFKHPLFDO'HULYDWLYH8QLWVXWLOLWLHVRIIVLWHDQG
MHWW\LQVWDOODWLRQV
7KH 5$3,' 352-(&7 LV D IXQGDPHQWDO FRPSRQHQW RI WKH 3HQJHUDQJ ,QWHJUDWHG &RPSOH[
3,& ZKLFK DOVR LQFOXGHV WKH IROORZLQJ PDMRU SURMHFWV 3HQJHUDQJ &RPELQHG &\FOH 3RZHU
3ODQW 3&3 D QHZ /1* 5HFHSWLRQ 7HUPLQDO 5*7 5DZ :DWHU 6XSSO\ 3URMHFW 3$0(5
3HQJHUDQJ 'HHS :DWHU 7HUPLQDO 3':7 DQG $LU 6HSDUDWLRQ 8QLW $68 ZKLFK SURYLGHV
R[\JHQDQGQLWURJHQJDVHVWRWKH&RPSOH[DQGWRWKHORFDOPDUNHW
7KH 5$3,' 352-(&7 LV ORFDWHG DW 3HQJHUDQJ 0XNLP RI 3HQJHUDQJ .RWD 7LQJJL 'LVWULFW
-RKRU DQG LV LQ FORVH SUR[LPLW\ WR WKH LQWHUQDWLRQDO VKLSSLQJ ODQH FRQQHFWLQJ WKH 6WUDLWV RI
0DODFFD6LQJDSRUHDQGWKH6RXWK&KLQD6HD
7KH SXUSRVH RI WKLV GRFXPHQW LV WR FRYHU WKH PLQLPXP UHTXLUHPHQWV IRU ³([WHUQDO )XVLRQ
%RQGHG(SR[\3RZGHU&RDWLQJIRU/LQH3LSH´ WREHXVHGIRUWKH3(7521$65$3,'5HILQHU\
DQG3HWURFKHPLFDO,QWHJUDWHG'HYHORSPHQW3URMHFW
7KLVKDVEHHQGHYHORSHGEDVHGRQWKH3(7521$67HFKQLFDO6WDQGDUGQR376
GDWHG )HEUXDU\ DPHQGHG KHUHLQ 7KLV SURMHFW VSHFLILFDWLRQ WKHUHIRUH VXSSOHPHQWV WKH
LQLWLDO376
5()(5(1&('2&80(176
5$3,'328,(1*35&3URMHFW6SHFLILFDWLRQ± 6SHFLILFDWLRQ1XPEHU&URVV
5HIHUHQFH%HWZHHQ)(('DQG5$3,'8,2
$&521<0$1''(),1,7,216
7KHIROORZLQJWHUPVXVHGLQWKLVGRFXPHQWKDYHWKHPHDQLQJGHILQHGEHORZ
2:1(5 353&8WLOLWLHVDQG)DFLOLWLHV6GQ%KG
(3&0&2175$&725 28,-9-RLQWYHQWXUHDSSRLQWHGE\2:1(5ZLWKVSHFLILHG
DXWKRULW\WRSHUIRUPWKH(3&06HUYLFHVRIWKH8,23URMHFW
352-(&7 RU8,2352-(&7 (3&0RIXWLOLWLHVLQWHUFRQQHFWLQJDQGRIIVLWHIDFLOLWLHV8,2
3DFNDJHIRU5$3,'352-(&7DW3HQJHUDQJ-RKRU
(3&0 (QJLQHHULQJ3URFXUHPHQWDQG&RQVWUXFWLRQ0DQDJHPHQW
3$&.$*(:25. 7KHZRUNVVHUYLFHVRUVXSSOLHVRUDQ\RUDOORIWKHIRUHJRLQJ
WREHXQGHUWDNHQE\D3$&.$*(&2175$&725RU
3$&.$*(9(1'25DVDSSOLFDEOH
6&23(2):25. PD\DOVREHXVHGLQVWHDGRI3$&.$*(
:25.WRIDFLOLWDWHWKHXQGHUVWDQGLQJ RIDOOWKHSDUWLHV
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
3$&.$*( 0HDQVHDFKSDFNDJHRIZRUNVRUVXSSOLHVIRUPLQJSDUWRUSDUWV
RIWKH352-(&7
3$&.$*(9(1'25 0HDQVDQ\9HQGRUHQJDJHGE\2:1(5WRVXSSO\(TXLSPHQW
DQG0DWHULDOVRU6SDUH3DUWVZKLFKPD\LQFOXGHDVVRFLDWHG
VHUYLFHV
3$&.$*(&2175$&725 0HDQVDQ\&RQWUDFWRUHQJDJHGE\2:1(5WRXQGHUWDNHWKH
3$&.$*(:25.6IRUD3$&.$*(
68%&2175$&725 0HDQV DQ\FRPSDQ\ZKLFK(3&0&2175$&725KDV
HQJDJHGRUSURSRVHVWRHQJDJHDVWKHFRQWH[WPD\UHTXLUHWR
XQGHUWDNHDQ\SDUWRIWKH(3&0&2175$&7256HUYLFHV
7KHDFURQ\PVXVHGLQWKLVGRFXPHQWKDYHWKHPHDQLQJGHILQHGEHORZ
376 3(7521$67HFKQLFDO6WDQGDUG
5$3,' 5HILQHU\$QG3HWURFKHPLFDOV,QWHJUDWHG'HYHORSPHQW
+,& +\GURJHQ,QGXFHG&UDFNLQJ
66& 6XOILGH6WUHVV&UDFNLQJ
62+,& 6WUHVV2ULHQWHG+\GURJHQ,QGXFHG&UDFNLQJ
:)07 :HW)OXRUHVFHQW0DJQHWLF7HVWLQJ
:36 :HOGLQJ3URFHGXUH6SHFLILFDWLRQ
345 3URFHGXUH4XDOLILFDWLRQ5HFRUG
:0 :HOG0HWDO
%0 %DVH0DWHULDO
+$= +HDW$IIHFWHG=RQH
&/5 &UDFN/HQJWK5DWLR
&75 &UDFN7KLFNQHVV5DWLR
&65 &UDFN6HQVLWLYLW\5DWLR
&( &DUERQ(TXLYDOHQW
&075 &HUWLILHG0DWHULDO7HVW5HFRUGV
60$: 6KLHOGHG0HWDO$UF:HOGLQJ
)&$: )OX[&RUHG$UF:HOGLQJ
&2'(6$1'67$1'$5'6
$33/,&$%/(&2'(6 67$1'$5'6

,62 1$&( 05 0DWHULDOV 5HVLVWDQW WR 6XOILGH 6WUHVV &UDFNLQJ LQ
&RUURVLYH3HWUROHXP5HILQLQJ(QYLURQPHQWV
1$&(70 (YDOXDWLRQRI3LSHOLQHDQG3UHVVXUH9HVVHO6WHHOVIRU5HVLVWDQFHWR
+\GURJHQ,QGXFHG&UDFNLQJ
1$&( 70 /DERUDWRU\ 7HVWLQJ RI 0HWDOV IRU 5HVLVWDQFH WR 6XOILGH 6WUHVV
&UDFNLQJDQG6WUHVV&RUURVLRQ&UDFNLQJLQ+6(QYLURQPHQWV
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
$60(&RGHZLWKLQSDUWLFXODU
$60(9,,,GLYDQGGLYIRUGHVLJQDQGIDEULFDWLRQRISUHVVXUHYHVVHOV
$60(9IRU1'(
$60(,;IRUZHOGLQJ
$60(%IRUGHVLJQDQGIDEULFDWLRQRISLSLQJ
$670 $ 6WDQGDUG WHVW PHWKRG IRU LQGHQWDWLRQ KDUGQHVV RI PHWDOOLF PDWHULDOV E\
SRUWDEOHKDUGQHVVWHVWHUV
$670$ 6WDQGDUG6SHFLILFDWLRQIRU7KURXJK7KLFNQHVV7HQVLRQ7HVWLQJRI6WHHO
3ODWHVIRU6SHFLDO$SSOLFDWLRQV
$670 $ 6WDQGDUG 3UDFWLFH IRU ,QGHQWDWLRQ +DUGQHVV RI 0HWDOOLF 0DWHULDOV E\
&RPSDULVRQ+DUGQHVV7HVWHUV
$670( 6WDQGDUG7HVW0HWKRGIRU,QGHQWDWLRQ+DUGQHVVRI0HWDOOLF0DWHULDOVE\
3RUWDEOH+DUGQHVV7HVWHUV
$670( 6WDQGDUG7HVW0HWKRGVIRU'HWHUPLQLQJ$YHUDJH*UDLQ6L]H
(1 'HVWUXFWLYH7HVWV RQ:HOGVLQ0HWDOOLF0DWHULDOV+DUGQHVV7HVWLQJ3DUW
+DUGQHVV7HVWRQ$UF:HOGHG-RLQWV
,62 :HOGLQJ DQG DOOLHG SURFHVVHV 'HWHUPLQDWLRQ RI K\GURJHQ FRQWHQW LQ DUF
ZHOGPHWDO
$:6$ 6WDQGDUG0HWKRGVIRU'HWHUPLQDWLRQRIWKH'LIIXVLEOH+\GURJHQ&RQWHQWRI
0DUWHQVLWLF%DLQLWLFDQG)HUULWLF6WHHO:HOG0HWDO3URGXFHGE\$UF:HOGLQJ
25'(52)35(&('(1&(
,QFDVHRIFRQIOLFWEHWZHHQ/DZV3URMHFW6SHFLILFDWLRQVDQG&RGHV 6WDQGDUGVWKHIROORZLQJ
RUGHURISUHFHGHQFHVKDOOEHFRQVLGHUHG
0DOD\VLDQ/DZVDQGDSSOLFDEOHUHJXODWRU\UHTXLUHPHQWV
3URMHFW6SHFLILFDWLRQVDQGVXSSOHPHQWHG376
$SSOLFDEOH0DOD\VLDQ&RGHVDQG6WDQGDUGV
$SSOLFDEOH,QWHUQDWLRQDO&RGHVDQG6WDQGDUGV
,IDORZHUOHYHOUHTXLUHPHQWLVPRUHVWULQJHQWWKDQDQXSSHURQHLQWKHDERYHGRFXPHQWVD
UHTXHVWVKDOOEHUDLVHGWR2:1(5IRUZULWWHQGHFLVLRQEHIRUHSURFHHGLQJZLWKWKH'HVLJQ
0DQXIDFWXUHRU&RQVWUXFWLRQ
6(59,&(6800$5<
3,3,1*
)RU FDUERQ VWHHO SLSLQJ GHILQHG DV ³ZHW +6 VHUYLFH´ WKH ZKROH UHTXLUHPHQW RI WKLV
VSHFLILFDWLRQLVDSSOLFDEOH
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
(48,30(17
7KUHH OHYHOV RI ³ZHW +6´ VHUYLFHV DUH GHILQHG ZLWK WKH IROORZLQJ XVH DQG VFRSH RI
UHTXLUHPHQWV
:HW+6VHUYLFH± 66&RQO\
$SSOLFDEOH WR HTXLSPHQW RQO\ ZKHUH 66& ULVNV DUH PHW EXW +,& FRQGLWLRQV DUH QRW
IRUHVHHQ
&RQIRUPDQFHWR,62RU1$&(05LVPDQGDWRU\
2QO\DSSOLFDWLRQRIDQGRIWKLVVSHFLILFDWLRQVKDOOEHFRQVLGHUHGPDQGDWRU\
:HW+6VHUYLFH +,&
$SSOLFDEOHWRSLSLQJDQGHTXLSPHQWLQZHW+6VHUYLFH
0DWHULDO PDQXIDFWXULQJ WHVWLQJ DQG H[DPLQDWLRQ RI SLSLQJ DQG SUHVVXUH UHWDLQLQJ
HTXLSPHQWVKDOOIXOILOWRWKHZKROHUHTXLUHPHQWVRIWKLVVSHFLILFDWLRQ
:HW+6VHUYLFH± 62+,&
$SSOLFDEOHWRHTXLSPHQWRQO\ZKHUHVHYHUHZHW+6HQYLURQPHQWVDUHPHW
$SSOLFDWLRQRIFRQWLQXRXVFODGRUZHOGRYHUOD\LV PDQGDWRU\
(DFKLQGLYLGXDOHTXLSPHQWGDWDVKHHW RUSLSLQJFODVV,VRPHWULF GHILQHVWKHDSSOLFDEOH
OHYHORIZHW+6VHUYLFH
0$7(5,$/6
*(1(5$/
8QOHVV RWKHUZLVH VSHFLILHG LQ WKH HTXLSPHQW SLSLQJ GDWDVKHHW DQGRU UHTXLVLWLRQ DOO
SUHVVXUH UHWDLQLQJ EDVH PDWHULDOV VKDOO EH VXSSRUWHG E\ LQVSHFWLRQ FHUWLILFDWH LQ
DFFRUGDQFH ZLWK SURMHFW VSHFLILFDWLRQV )RU DOO PDWHULDO UHTXLULQJ +,& WHVW PDWHULDO
FHUWLILFDWHVKDOOEHSURYLGHGIROORZLQJ(1OHYHO
8QOHVVRWKHUZLVHVSHFLILHGWKHUHTXLUHPHQWVRIWKLVVSHFLILFDWLRQIRUFKHPLFDODQDO\VLV
VKDOO DSSO\ WR WKH KHDW DQDO\VLV )RU ZHOGHG FRPSRQHQWV FKHPLFDO DQDO\VLV VKDOO
LQFOXGHLQDGGLWLRQWKHHOHPHQWVXVHGIRUWKHGHWHUPLQDWLRQRI&DUERQ(TXLYDOHQW
([SORVLYHO\ FODG UROO ERQGHG RU IXVLRQERQGHG FRUURVLRQ UHVLVWDQW RYHUOD\ VXFK DV
DXVWHQLWLF RU DXVWHQLWLFIHUULWLF VWDLQOHVV VWHHO RU QLFNHO DOOR\ DUH FRQVLGHUHG WR EH
HIIHFWLYHEDUULHUVZKHQH[SRVHGWR³:HW+6VHUYLFHV´DQGWKHEDFNLQJPDWHULDOQHHG
QRWWRFRQIRUPWRWKLV6SHFLILFDWLRQ
$OOFDUERQVWHHOFRPSRQHQWVVKDOOFRPSO\ZLWK 1$&(05
3/$7(
8QOHVV RWKHUZLVH VSHFLILHG SODWH FRQIRUPLQJ WR $60( ,, 6$ RU $670 $ DV
DSSOLFDEOHZLWKVXSSOHPHQWDU\UHTXLUHPHQW69DFXXP7UHDWPHQWDQG66LPXODWHG
3RVW :HOG +HDW 7UHDWPHQW RI 0HFKDQLFDO 7HVW &RXSRQV SOXV WKH IROORZLQJ DGGLWLRQDO
UHTXLUHPHQWVVKDOOEHXVHG
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
1RQSUHVVXUHUHWDLQLQJDWWDFKPHQWVERWKLQWHUQDOO\DQGH[WHUQDOO\DUHH[HPSWIURPWKLV
VSHFLILFDWLRQZLWKWKHH[FHSWLRQRI:)07DVGHWDLOHGLQ
3ODWHVSURGXFHGIURPFRLOVDUHQRWSHUPLWWHG
$OOFDUERQVWHHOSODWHPDWHULDOVVKDOOIXOO\NLOOHGDQGVXSSOLHGLQWKHQRUPDOL]HGFRQGLWLRQ
1RUPDOL]LQJ VKDOO EH FDUULHG RXW DV D VHSDUDWH KHDW WUHDWPHQW E\ WKH PDWHULDO
PDQXIDFWXUHU7KHDFFHSWDELOLW\RIKRWILQLVKHGPDWHULDOVKDOOEHVXEMHFWWRWKHDSSURYDO
RIWKH2:1(5
2WKHUKHDWWUHDWPHQWFRQGLWLRQVVXFKDVTXHQFKDQGWHPSHUHGRU7KHUPDO0HFKDQLFDO
&RQWUROOHG 3URFHVV 70&3 VKDOO EH VXEMHFWHG WR &2175$&725 DQG WKH 2:1(5
DJUHHPHQW
7KHDFFHSWDELOLW\RIKRWILQLVKHGPDWHULDOVKDOOEHVXEMHFWWR&2175$&725DSSURYDO
$OOSODWHVVKDOOKDYHDWHQVLOHVWUHQJWKRIOHVVWKDQ03D
3ODWH PDWHULDO VKDOO EH PHFKDQLFDOO\ WHVWHG LQ WKH VLPXODWHG 3:+7 FRQGLWLRQ WR
DQWLFLSDWHWKHPLQLPXPKHDWWUHDWPHQWF\FOHVIRUHVHHQGXULQJIDEULFDWLRQRIWKHYHVVHO
&KHPLVWU\UHTXLUHPHQWV
7KHSODWHPDWHULDOVKDOOFRPSO\ZLWKIROORZLQJFKHPLFDOKHDWDQDO\VLV
(OHPHQWV 0D[LPXP
i &DUERQ&
i 0DQJDQHVH0Q
i 6LOLFRQ6L
i 6XOSKXU6
i 3KRVSKRURXV3
i &RSSHU&X
i 1LFNHO1L
i &KURPLXP&U
i 0RO\EGHQXP0R
i 9DQDGLXP91RWH
i 1LRELXP1ERU&E1RWH
i 7LWDQLXP7L1RWH
i %RURQ%1RWH
i 2[\JHQ
0XOWLSOH(OHPHQWV
i &U0R
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
(OHPHQWV 0D[LPXP
i 1L&X&U0R
i 97LWDQLXP7L1E
i 91E
IRU WKLFNQHVV EHORZ ´
&DUERQ(TXLYDOHQW&(1RWH
IRUWKLFNQHVVDERYHRUHTXDO´
1RWHV
7KHIROORZLQJIRUPXODVKDOOEHXVHGWRFDOFXODWHWKH&(
0Q &U 0R 9 &X 1L
&( &
'HOLEHUDWHO\ DGGHG PLFUR DOOR\LQJ HOHPHQWV VKDOO UHTXLUH SULRU DSSURYDO RI
&2175$&725DQG2:1(50LFURDOOR\LQJHOHPHQWVDUHFRQVLGHUHGWREHGHOLEHUDWHO\
DGGHG ZKHQ WKH VLQJOH YDOXHV RI 1LRELXP 1E 9DQDGLXP 9 DQG 7LWDQLXP 7L DUH
JUHDWHUWKDQDQG%RURQ%JUHDWHUWKDQ
0DQXIDFWXULQJ RIVWHHOSODWH

7KH VWHHO VKDOO EH SURGXFHG E\ HOHFWULF DUF IXUQDFH RU LQ WKH EDVLF R[\JHQ IXUQDFH
SURFHVV 7KH VWHHO VKDOO EH YDFXXP GHJDVVHG DQG SURGXFHG WR D ILQH JUDLQ SUDFWLFH
ZLWKORZVXOSKXUDQGSKRVSKRUXVSURFHVV*UDLQVL]HVKDOOEH RUILQHUDVGHILQHGE\
$670(
&DOFLXP WUHDWPHQW VKDOO EH DSSOLHGIRU LQFOXVLRQ VKDSH FRQWURO H[FHSW WKDW LW QHHGQRW
EH DSSOLHG WR SODWH ZLWK YHU\ ORZ VXOSKXU OHYHOV EHORZ 7KH FDOFLXP FRQWHQW
VKRXOGQRWH[FHHGWLPHVWKHVXOSKXUFRQWHQW
$OWHUQDWLYH PHWKRGV RI LQFOXVLRQ VKDSH FRQWURO VKDOO EH VXEMHFW WR WKH DFFHSWDQFH RI
&2175$&725
7KHPDQXIDFWXULQJUROOLQJSURFHVVVKDOOEHVXFKWKDWDKRPRJHQHRXVPLFURVWUXFWXUHLV
REWDLQHG LH WKH VWUXFWXUH VKDOO EH IUHH RI DQ\ VLJQLILFDQW IHUULWHSHDUOLWH EDQGLQJ DQG
DQ\FHQWUHOLQHVHJUHJDWLRQ
7KH0DQXIDFWXUHUVKDOOVXEPLWWKHIROORZLQJLQIRUPDWLRQLQLWVTXRWDWLRQ
x 6WHHOPDNLQJURXWHGHR[LGLVDWLRQDQGGHVXOSKXULVDWLRQSUDFWLFHLQFOXVLRQVKDSH
FRQWUROPHWKRGXVHRIYDFXXPGHJDVVLQJ
x &DVWLQJ URXWH LQJRW RU FRQWLQXRXV FDVWLQJ VHJUHJDWLRQ FRQWURO SURFHGXUHV
UROOLQJUHGXFWLRQ
x 0HWKRGVVWDQGDUGVIRUSUHYHQWLQJ&HQWUH/LQH6HJUHJDWLRQ
x +,&WHVWUHVXOWVRQSUHYLRXVVLPLODUPDWHULDO
x +HDWWUHDWPHQW
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
7KURXJKWKLFNQHVVWHVWLQJ
)RU ³ZHW +6 VHUYLFH ± 66& RQO\´ VHUYLFH DOO SODWHV VKDOO PHHW WKH WKURXJKWKLFNQHVV
WHVWLQJ UHTXLUHPHQW RI $670 $ ZLWK VXSSOHPHQWDU\ UHTXLUHPHQW 6 GHILQLQJ D
PLQLPXPDUHDUHGXFWLRQRI
$OWHUQDWHO\+,&WHVWHGSODWHVSHUDUHDFFHSWDEOH
8OWUDVRQLFWHVWLQJ
$OOSODWHVRIWKLFNQHVVJUHDWHUWKDQPPVKDOOEHWHVWHGE\8OWUDVRQLF([DPLQDWLRQLQ
DFFRUGDQFHZLWK$670$ZLWKVXSSOHPHQWDU\UHTXLUHPHQWV6
$FFHSWDQFHFULWHULDOHYHO&VKDOODSSO\
+,&WHVWLQJ
8QOHVV RWKHUZLVH VSHFLILHG +,& WHVWLQJ VKDOO EH UHTXLUHG IRU HDFK VWHHO PDQXIDFWXULQJ
VXSSOLHUHDFKVWHHOJUDGHDQGPDQXIDFWXULQJVWHHOSURFHVVDWWKHIROORZLQJH[WHQW
3HU KHDW RQ WKH WKLQQHVW DQG WKLFNHVW SODWH LQ WKH VLPXODWHG 3:+7 FRQGLWLRQ WR
DQWLFLSDWHWKHPLQLPXPKHDWWUHDWPHQWF\FOHVIRUHVHHQGXULQJIDEULFDWLRQRIWKHYHVVHO
)RU SURFHVV SLSHV +,& WHVWLQJ VKDOO EH FRQGXFWHG RQ WZR SLSHV IURP HDFK ORW RI
OHQJWKVRUIUDFWLRQWKHUHRIRIHDFKVL]HXSWREXWLQFOXGLQJ136DQGIURPHDFKORWRI
OHQJWKVRUIUDFWLRQWKHUHRIRIHDFKVL]H136DQGRYHU
,QWHUQDODQGH[WHUQDODWWDFKPHQWVGRQRWQHHGWREH+,&PDWHULDO
7HVWVSHFLPHQVVKDOOEHWDNHQQHDUWKHPLGSRLQWRIRQHHQGRIWKHSODWH
7KHORQJLWXGLQDOD[LVRIWKHWHVWVSHFLPHQVVKDOOEHSDUDOOHOWRWKHSULPDU\SODWHUROOLQJ
GLUHFWLRQ
+,&WHVWSURFHGXUHLVGHILQHGLQ$SSHQGL[
6($0/(663,3($1'6($0/(663,3(),77,1*6
)RU(TXLSPHQW
2QO\VHDPOHVVSLSHVDQGILWWLQJVVKRXOGEHXVHGIRUHTXLSPHQWQR]]OHV:KHUHWKLVLV
LPSUDFWLFDOZHOGHGSLSHVDQGILWWLQJVPD\EHXVHGZLWKDGGLWLRQDOUHTXLUHPHQWVSHFLILHG
LQ &KHPLFDO $QDO\VLV VKDOO LQFOXGH DOO HOHPHQWV UHTXLUHG E\ DSSOLFDEOH PDWHULDO
VWDQGDUGVDVZHOODVWKHHOHPHQWVXVHGIRUWKHGHWHUPLQDWLRQRI&DUERQ(TXLYDOHQW
&KHPLFDODQDO\VLVRQKHDWVKDOOEHLQDFFRUGDQFHZLWKIROORZLQJUHVWULFWLRQV
(/(0(176 0D[
i &DUERQ
i 0DQJDQHVH
i 6LOLFRQ
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
(/(0(176 0D[
i 6XOSKXU
i 3KRVSKRUXV
&DUERQ(TXLYDOHQW&(
&DUERQ(TXLYDOHQWVKDOOEHFDOFXODWHGXVLQJWKH IRUPXODVSHFLILHGLQ
)RUSLSLQJ
&DUERQ (TXLYDOHQW FDOFXODWHG XVLQJ WKH IRUPXOD VSHFLILHG LQ VKDOO EH
0D[LPXP
3KRVSKRUXVDQGVXOSKXUFRQWHQWVKDOOEHPD[LPXP HDFK
5HFRPPHQGDWLRQVIRUKHDWWUHDWPHQWRIVHDPOHVVSLSH
,Q RUGHU WR DFKLHYH WRXJKQHVV UHTXLUHPHQW RI PDWHULDO LW LV UHFRPPHQGHG WR IROORZ
2:1(5UHTXLUHPHQWDVIROORZV
1RUPDOLVLQJ VKDOO FRQVLVW RI KHDWLQJ WR D XQLIRUP WHPSHUDWXUH QRW OHVV WKDQ &
IROORZHG E\ FRROLQJ LQ VWLOO DLU RU LQ WKH FRROLQJ FKDPEHU RI DQ DWPRVSKHUHFRQWUROOHG
IXUQDFH
,Q FDVH WKH SLSH LV KRW ILQLVKHG FHUWLILFDWLRQ VKDOO EH SURYLGHG WKDW KRW ILQLVKLQJ ZDV
FDUULHG RXW LQ WKH WHPSHUDWXUH UDQJH RI & WR & IROORZHG E\ FRROLQJ LQ DQ
DWPRVSKHUHFRQWUROOHGIXUQDFHRUFRROLQJLQVWLOODLU
:(/'('3,3($1':(/'('3,3(),77,1*6)25 (48,30(17$1'3,3,1*

:HOGHG SLSH DQG ZHOGHG SLSH ILWWLQJV PDQXIDFWXUHG IURP SODWHV VKDOO PHHW DOO WKH
UHTXLUHPHQWVRILQFOXGLQJ+,&WHVWLQJ
:HOGLQJ SURFHGXUH TXDOLILFDWLRQ DQG DVVRFLDWHG KDUGQHVV UHVWULFWLRQV VKDOO EH LQ
DFFRUGDQFHZLWKRIWKLVVSHFLILFDWLRQ
$IWHU UROOLQJ DQG ZHOGLQJ SLSHV VKDOO EH VXEMHFW WR 3RVW :HOG +HDW 7UHDWPHQW LQ
DFFRUGDQFHZLWKDWWKHSLSHPLOO
/RQJLWXGLQDO ZHOGV VKDOO EH H[DPLQHG RQ WKHLU IXOO OHQJWK E\ XOWUDVRQLF H[DPLQDWLRQ
DQGRU UDGLRJUDSK\ H[DPLQDWLRQ LQ DFFRUGDQFH ZLWK DSSOLFDEOH SLSH PDWHULDO VWDQGDUG
VSHFLILFDWLRQ
5DGLRJUDSK\ UHTXLUHPHQWV VKDOO PHHW DV D PLQLPXP WKH UDGLRJUDSK\ UHTXLUHPHQWV
GLFWDWHGE\WKHSLSLQJVHUYLFHDVLQGLFDWHGRQOLQHOLVW
0D[LPXP
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
)25*,1*6
)RUHTXLSPHQW
)RUJLQJVVKDOOFRPSO\ZLWKIROORZLQJFKHPLFDODQDO\VLV
(OHPHQWV 0D[
i &DUERQ
i 0DQJDQHVH 1RWH
i 3KRVSKRUXV
i 6XOSKXU
&DUERQ(TXLYDOHQW
&DUERQ(TXLYDOHQWVKDOOEHGHWHUPLQHGXVLQJWKHIRUPXODJLYHQLQ
1RWH
)RUDQ\UHGXFWLRQRIEHORZWKHVSHFLILHG0Q FRQWHQWDQLQFUHDVHRI6
DQG3DERYHWKHVSHFLILHGPD[LPXPYDOXHVVKDOOEHSHUPLWWHGXSWRUHVSHFWLYHO\
IRU3DQGIRU6
1R+,&7HVWLQJLVUHTXLUHGRQ)RUJLQJV
)RUSLSLQJ
0D[LPXP
&$67,1*6
&DVWLQJVVKDOOFRPSO\ZLWKWKHIROORZLQJFKHPLFDODQDO\VLV
(OHPHQWV 0D[
i &DUERQ
i 0DQJDQHVH
i 3KRVSKRUXV
i 6XOSKXU
&DUERQ
(TXLYDOHQW
7KHFDUERQHTXLYDOHQW&(VKDOOEHFDOFXODWHGE\WKHIRUPXODJLYHQLQ
1R+,&LVUHTXLUHGRQFDVWLQJPDWHULDO
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
$Q\UHSDLUE\ZHOGLQJVKDOOUHTXLUH3RVW:HOG+HDW7UHDWPHQW
:HOGLQJSURFHGXUHTXDOLILFDWLRQIRUDQ\UHSDLUVKDOOLQFOXGHKDUGQHVVWHVWLQJDVGHILQHG
LQRIWKLV6SHFLILFDWLRQ
(;&+$1*(578%,1*
1RVSHFLDOUHTXLUHPHQWIRUWXELQJ
%2/7,1*
7KH EROWLQJ PDWHULDO XVHG IRU FDUERQ VWHHO LQWHUQDO EROWLQJ LQFOXGLQJ IORDWLQJ KHDG
EROWLQJ DQG WKRVH H[SRVHG WR ³:HW +6 VHUYLFH´ VKDOO EH FHUWLILHG DQG PHHW WKH
UHTXLUHPHQWVRI1$&(05RU,6205LQFOXGLQJKDUGQHVV
1R+,&WHVWLQJLVUHTXLUHGRQEROWLQJ
%ROWLQJVKDOOEH$670$%0DQG$670$+0XQOHVVRWKHUZLVHVSHFLILHGRQ
HTXLSPHQWGDWDVKHHWRUSLSLQJFODVV
0$7(5,$/&(57,),&$7,21)253/$7(6
0DWHULDO WHVW FHUWLILFDWH VKDOO LQFOXGH WKH SURYLVLRQV IRU VLPXODWHG 3RVW :HOG +HDW
7UHDWPHQW WR DQWLFLSDWH PD[LPXP KHDW WUHDWPHQW F\FOH IRUHVHHQ GXULQJ IDEULFDWLRQ RI
WKHHTXLSPHQWLQDFFRUGDQFHZLWKWKHVXSSOHPHQWDU\UHTXLUHPHQWV6RI$670$
8QOHVV RWKHUZLVH VSHFLILHG LQ WKH HTXLSPHQW SLSLQJ GDWDVKHHW DQGRU UHTXLVLWLRQ DOO
SUHVVXUH UHWDLQLQJ EDVH PDWHULDOV VKDOO EH VXSSRUWHG E\ LQVSHFWLRQ FHUWLILFDWH LQ
DFFRUGDQFHZLWKSURMHFWVSHFLILFDWLRQV
$VDPLQLPXPLQFOXGLQJEXWQRWOLPLWHGWR
x &KHPLVWU\
x 0HFKDQLFDOSURSHUWLHVDIWHUVLPXODWHGKHDWWUHDWPHQW
x +,&WHVWLQJUHVXOWVZKHQUHTXLUHG
x 8OWUDVRQLFH[DPLQDWLRQUHVXOWV
x ,PSDFW WHVWV UHVXOWV ZKHQ UHTXLUHG WR VDWLVI\ 0LQLPXP 'HVLJQ 0HWDO
7HPSHUDWXUHUHTXLUHPHQWV
x +HDWWUHDWPHQWUHSRUWV
x +DUGQHVVWHVWUHVXOWVDQGORFDWLRQVKDOOEHUHFRUGHGLQ&075
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
)$%5,&$7,212)35(6685(5(7$,1,1*&20321(176$1'(48,30(176
35(6685(5(7$,1,1*(48,30(17'(6,*1
6OLSRQIODQJHVDUHQRWDFFHSWDEOH
$OO LQWHUQDO DQG H[WHUQDO DWWDFKPHQWV VKDOO EH DWWDFKHG WR WKH SUHVVXUH UHWDLQLQJ SDUWV
XVLQJIXOOSHQHWUDWLRQZHOGV
)250,1*
&DUERQVWHHOVKDOOEHWKHUPDOO\VWUHVVUHOLHYHGHLWKHU3RVW:HOG+HDW7UHDWHGDVSHU
RU 1RUPDOL]HG IROORZLQJ DQ\ FROG GHIRUPLQJ E\ UROOLQJ FROG IRUJLQJ RU DQRWKHU
PDQXIDFWXULQJSURFHVVWKDWUHVXOWVLQDSHUPDQHQWRXWHUILEUHGHIRUPDWLRQJUHDWHUWKDQ

7KH XVH RI SLSH DQG ZHOG FDSV IRU VKHOOV DQG KHDGV LV QRW DOORZHG ZLWKRXW
&2175$&725SULRUDSSURYDO7KHSURSRVDOVKDOOVSHFLILFDOO\LQGLFDWHZKHQVWHHOSODWH
ZLOOQRWEHXVHGIRUVKHOOVDQGKHDGV
:(/',1*352&('85(48$/,),&$7,216
$OO ZHOGLQJ SURFHGXUH TXDOLILFDWLRQV VKDOO EH TXDOLILHG LQ DFFRUGDQFH ZLWK WKH
UHTXLUHPHQWVRI$60(,;VXSSOHPHQWHGE\PDFURKDUGQHVVVXUYH\9LFNHUV+9
,IWKH&DUERQ(TXLYDOHQWRIPDWHULDOVXVHGIRUZHOGLQJSURFHGXUHTXDOLILFDWLRQWHVWGLIIHUV
E\ PRUH WKDQ IURP WKH PDWHULDOV SXUFKDVHG IRU WKH IDEULFDWLRQ SURGXFWLRQ ZHOG
WHVW FRXSRQ UHTXLUHG ZLOO KDYH WR EH FDUULHG RXW DW EHJLQQLQJ RI SURGXFWLRQ IRU
LPPHGLDWHWHVWLQJ
&HUWLILHG0DWHULDO7HVW5HFRUGV&075VKDOOEHVXEPLWWHGDORQJZLWKWKH345
:HOGLQJ SDUDPHWHUV IRU SURGXFWLRQ ZHOGLQJ VKDOO EH ZLWKLQ WKH IROORZLQJ UDQJHV RI WKH
345
$PSV WR
9ROWV WR
7UDYHO6SHHG WR
)RUVLPLODUZHOGSDVVHVWKHKHDWLQSXWLQSURGXFWLRQZHOGLQJVKDOOQRWEHOHVVWKDQWKH
RQHUHFRUGHGGXULQJZHOGLQJSURFHGXUHTXDOLILFDWLRQWHVWPLQXV
0LQLPXPPD[LPXPLQWHUSDVVWHPSHUDWXUHVVKDOOEHUHVWULFWHGWRWKHYDOXHVVKRZQLQ
WKHVXSSRUWLQJ345DQGWKHPD[LPXPLQWHUSDVVWHPSHUDWXUHVKDOOEH)&
+DUGQHVVWHVWRQWUDQVYHUVHVHFWLRQ
+DUGQHVV WHVW RQ WUDQVYHUVH VHFWLRQ VKDOO EH SHUIRUPHG RQ ZHOG PDFUR FURVV VHFWLRQ
DFFRUGLQJWRWKH9LFNHUVKDUGQHVVWHVWPHWKRGGHILQHGLQ(1XQGHUNJORDG
7KHVHULHVRIUHDGLQJVVKDOOLQFOXGHXQDIIHFWHGEDVHPDWHULDO%0+HDW$IIHFWHG=RQH
+$=:HOG0HWDO:0
3KRWRPDFURJUDSKVVKRZLQJWKHLQGHQWORFDWLRQVVKDOOEHVXEPLWWHGZLWKWKH345
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
8QOHVV RWKHUZLVH VSHFLILHG WKH PD[LPXP KDUGQHVV VKDOO QRW H[FHHG +9 LQ DQ\
DUHDRI%DVH0HWDO:HOGPHWDODQG+HDW$IIHFWHG=RQH
345VKDOODOVRLQFOXGHVXUIDFH%ULQHOOKDUGQHVVWHVWRQZHOGPHWDODQGEDVHPDWHULDO
DVSHUWKHVDPHWHVWPHWKRGWKDWZLOOEHXVHGGXULQJSURGXFWLRQDVSHU
7HVWFRXSRQVIRUKDUGQHVVWHVWLQJVKDOOEHVXEMHFWWRWKHPLQLPXPKHDWWUHDWPHQWF\FOH
DQWLFLSDWHGGXULQJIDEULFDWLRQ
D,QWKHHYHQWZKHUHH[LVWLQJ345KDYHEHHQPDGHZLWKRXWKDUGQHVVVXUYH\DFRXSRQ
ZHOGHGZLWKWKHVDPH ZHOGLQJYDULDEOHVDVWKH345VKDOOEHFDUULHGRXWIRUKDUGQHVV
WHVWVXUYH\DVGHWDLOHGDERYHEHIRUHEHJLQQLQJRISURGXFWLRQ
E(DFKQHZ345VKDOOLQFOXGHDKDUGQHVVVXUYH\DVGHVFULEHGDERYH
6833/(0(17$5<:(/',1*352&(665(48,5(0(176
6KLHOGHG0HWDO$UF:HOGLQJ60$:

3UHVVXUHUHWDLQLQJZHOGVVKDOOEHPDGHZLWKORZK\GURJHQHOHFWURGHV
/RZK\GURJHQHOHFWURGHVVKDOOH[KLELWDYHU\ORZGLIIXVLEOHK\GURJHQOHVVWKDQFP
+JURIPHWDOGHSRVLWLQDFFRUGDQFHZLWK,620HUFXU\WHVWLQJ$:6$
RUHTXLYDOHQWVWDQGDUG
)OX[FRUHGDUFZHOGLQJ)&$:

)&$: SURFHVV VKDOO QRW EH XVHG IRU SUHVVXUH UHWDLQLQJ ZHOGV DQG ZHOG WR SUHVVXUH
UHWDLQLQJSDUWV
:(/',1*&21680$%/(6
1LFNHOFRQWHQWRIWKHZHOGLQJFRQVXPDEOHVVKDOOQRWH[FHHG
8QOHVV RWKHUZLVH DSSURYHG E\ &2175$&725 ZHOG PHWDO DQDO\VLV VKDOO EH ZLWKLQ
$60(,;$1XPEHUV
)LOOHUPDWHULDOZLWKWHQVLOHVWUHQJWKJUHDWHUWKDQ03D SVLVKDOOQRWEHXVHG
35(+($7
3UHKHDW VKDOO EH VHWXS DQG DSSOLHG LQ DFFRUGDQFH ZLWK FRGH UHTXLUHPHQWV DQG
DSSOLFDEOHSURMHFWVSHFLILFDWLRQV3UHKHDWWHPSHUDWXUHVKDOOQRWEHORZHUWKDQVSHFLILHG
LQWKHDSSOLFDEOH:36
352'8&7,217(67:(/' &283216

)RU HDFK TXDOLILHG ZHOGLQJ SURFHGXUH XVHG IRU ZHOGHG MRLQW RI FDWHJRULHV $ DQG % RI
HDFK YHVVHO RU JURXS RI YHVVHOV D SURGXFWLRQ ZHOG FRXSRQ VKDOO EH UHTXLUHG IRU
+DUGQHVVWHVWRQWUDQVYHUVHVHFWLRQ DVGHILQHGLQRIWKLVVSHFLILFDWLRQ
1RWH 'HILQLWLRQRIJURXSRIYHVVHOVLVJLYHQLQ$60(9,,,'LYFODXVH8*
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
:(/',1*2)',66,0,/$50$7(5,$/
3UHVVXUH UHWDLQLQJ ZHOGV RI GLVVLPLODU PDWHULDO EHWZHHQ )HUULWLF VWHHO WR $XVWHQLWLF
VWDLQOHVVVWHHOVKDOOQRWEHSHUPLWWHGZKHQGLUHFWO\H[SRVHGWR³:HW+6VHUYLFH´
3267:(/'+($775($70(173:+7
35(6685(9(66(/6
3:+7LVUHTXLUHGIRUSUHVVXUHYHVVHOVLUUHVSHFWLYHRIWKLFNQHVV
3,3,1*6<67(035()$%5,&$7,21$1'$66(0%/<

3:+7LVPDQGDWRU\IRUDOOSUHVVXUHSLSLQJZHOGV
([HPSWLRQ IRU 3:+7 RI SLSLQJ V\VWHP ZHOGV PD\ EH DOORZHG XSRQ ZULWWHQ
&2175$&725 DSSURYDO DQG SURYLGLQJ 3LSLQJ VXEFRQWUDFWRU H[KLELW :36345 LQ
DFFRUGDQFHZLWKDQGSURGXFWLRQKDUGQHVVWHVWLQJSHUIRUPHGDVGHWDLOHGLQ
UHYHDOVKDUGQHVVLQ:0DQG+$=QRWH[FHHGLQJ%+1
3:+7352&('85(
7KH3:+7WHPSHUDWXUHDQGWLPHVKDOOEHLQWKHUDQJHRI&WR&KRXU SHU
PPRIWKLFNQHVVKRXUPLQLPXP8VLQJDORZHUWHPSHUDWXUHIRUDORQJHUSHULRGRIWLPH
LV QRW SHUPLWWHG 7KH KHDWXS DQG FRROGRZQ UDWHV VKDOO EH LQ DFFRUGDQFH ZLWK $60(
6HFWLRQ9,,,'LYLVLRQRU$60(%DVDSSOLFDEOH
,QWHUQDOJDVILULQJLVQRWSHUPLWWHGZLWKRXW&2175$&725DQG2:1(5DSSURYDO
7KH IROORZLQJ GRFXPHQWDWLRQ VKDOO EH VXEPLWWHG WR WKH &2175$&725 IRU DSSURYDO
SULRUWR3:+7
3:+7SURFHGXUHLQGLFDWLQJW\SHRIIXUQDFHPHWKRGRIKHDWLQJHWF
/RFDO3:+7LIDQ\
1XPEHUDQGORFDWLRQRI 7KHUPRFRXSOHV
+HDWLQJFRROLQJUDWH
7HPSHUDWXUHDQGVRDNLQJWLPH
121'(6758&7,9((;$0,1$7,21
35(6685(9(66(/6
1RQ GHVWUXFWLYH H[DPLQDWLRQ VKDOO EH DV VSHFLILHG E\ &RGH DQG 3URMHFW VSHFLILFDWLRQV
VXSSOHPHQWHGE\
,Q DGGLWLRQ RI DOO DFFHVVLEOH LQVLGH VXUIDFHV RI SUHVVXUH UHWDLQLQJ ZHOGV DQG
LQWHUQDO DFFHVVLEOH DWWDFKPHQW ZHOGV VKDOO EH H[DPLQHG E\ :HW 0DJQHWLF )OXRUHVFHQW
3DUWLFOH 7HVW :)07 DIWHU 3RVW :HOG +HDW 7UHDWPHQW 3:+7 LQ DFFRUGDQFH ZLWK
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
$60( 9 $FFHSWDQFH FULWHULD VKDOO EH SHU $60( 6HFWLRQ 9,,, $SSHQGL[ ODWHVW
HGLWLRQ,QDGGLWLRQWR$SSHQGL[QROLQHDULQGLFDWLRQVVKDOOEHDFFHSWDEOH
$OO ZHOGV VKDOO EH JURXQG VPRRWK WR HQVXUH D SURSHU LQWHUSUHWDWLRQ RI :)07 DQG
UHPRYHXQGHUFXW
$OOWHPSRUDU\DWWDFKPHQWVDQGDUFVWULNHVVKDOOEHJURXQGVPRRWKDQGLQVSHFWHGXVLQJ
:)07
+$5'1(667(67,1*
3URGXFWLRQZHOGVIRUHTXLSPHQW
$OOSUHVVXUHUHWDLQLQJZHOGVLQHTXLSPHQWVKDOOEHKDUGQHVVWHVWHGDIWHU3:+7
)RU D PLQLPXP RI RQH ZHOG SHU 345 XVHG LQ SURGXFWLRQ WHVW VKDOO EH SHUIRUPHG RQ
EDVH PDWHULDO %0 ZHOG PHWDO :0 DQG KHDW DIIHFWHG ]RQH +$= 6XUIDFH VKDOO EH
JURXQGHGSULRUWHVWLQJ/RFDOHWFKLQJPD\EHQHFHVVDU\WRUHYHDO+$=
7UDQVYHUVH WHVW VKDOO EH FDUULHG RXW XVLQJ D SRUWDEOH 9LFNHUV RU 5RFNZHOO WHVWHU LQ
DFFRUGDQFHZLWK$670(RU E\RWKHUUHOLDEOHDQGUHSHDWDEOHPHWKRGDEOHWRGHWHFW
KDUG+$=LISUHOLPLQDU\DSSURYHGE\WKH2:1(5
)RUDOORWKHUZHOGVKDUGQHVVWHVWVKDOOEHFRQGXFWHGDWWKHVXUIDFHRIZHOGPHWDO
+DUGQHVVVKDOOQRWH[FHHG
+9RQZHOGPHWDODQGEDVHPDWHULDO
+9RQ+$=
:KHQDFFHVVLVDYDLODEOHWHVWVVKDOOEHSHUIRUPHGRQWKHSURFHVVFRQWDFWHGVLGH,'
RIWKHZHOGRWKHUZLVHWHVWLQJPD\EHFRQGXFWHGRQQRQSURFHVVVLGH2'
:KHUH XVH RI %ULQHOO WHVW PHWKRG LV DSSURYHG E\ WKH 2:1(5 PD[LPXP KDUGQHVV
YDOXHVKDOOEH+%
(DFKPHDVXUHPHQWVKDOOFRQVLVWRIWKUHHLQGHQWDWLRQV
3URGXFWLRQZHOGVRQSLSLQJV\VWHP
+DUGQHVVWHVWVKDOOEHFDUULHGRXWDWDPELHQWPHWDOWHPSHUDWXUHRQRIJURRYHEXWW
ZHOGVDQGEUDQFKFRQQHFWLRQZHOGV
:KHQDFFHVVLVDYDLODEOHWHVWVVKDOOEHSHUIRUPHGRQWKHSURFHVVFRQWDFWHGVLGHRIWKH
ZHOGRWKHUZLVHWHVWLQJPD\EHFRQGXFWHGRQQRQSURFHVVVLGH2'
+DUGQHVVWHVWVKDOOLQFOXGH:HOGPHWDO:0DQG+$=
7KH KDUGQHVV VKDOO EH GHWHUPLQHG DV DQ DYHUDJH RI WKUHH YDOXHV (TXDOO\ VSDFHG
DURXQGZHOGGLDPHWHU
7HVW PHWKRGV XVHG IRU SRUWDEOH KDUGQHVV WHVWLQJ VKDOO EH LQ DFFRUGDQFH ZLWK $670
$RU$670(DVDSSOLFDEOH5HERXQGPHWKRGDFFRUGLQJWR$670$VKDOO
QRW EH XVHG HJ (4827,3 8VH RI RWKHU PHWKRGV DQG HTXLSPHQW UHTXLUHV
&2175$&725DSSURYDO
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
3HUVRQQHO SHUIRUPLQJ KDUGQHVV WHVWLQJ VKDOO EH IDPLOLDU ZLWK DOO KDUGQHVV WHVWLQJ
SURFHGXUHVDQGWHVWPHWKRGV
+DUGQHVVUHVXOWVVKDOOQRWH[FHHG
+%1IRU31R0DWHULDOLQ³:HW+6VHUYLFH´
7KH KDUGQHVV UHSRUW VKDOO LQGLFDWH DFWXDO KDUGQHVV UHDGLQJ IRU WKH WHVW PHWKRG XVHG
W\SH RI KDUGQHVV WHVWHU SHUVRQQHO FRQGXFWLQJ KDUGQHVV WHVWV W\SH RI PDWHULDO DQG
FDOLEUDWLRQ
$33(1',;+,&7(67,1*352&('85(
5()(5(1&(352&('85(
+,& VKDOO EH LQ DFFRUGDQFH ZLWK WKH SURFHGXUH GHILQHG LQ 1$&( 6WDQGDUG 70
XVLQJWKH7HVWVROXWLRQ$DVGHILQHGLQ1$&(70
,Q DGGLWLRQ 2:1(5 UHFRPPHQGDWLRQV VKDOO EH FRQVLGHUHG IRU 1$&( 6WDQGDUG 70

x +6SXULW\VKDOOEHYRORUEHWWHUDQGR[\JHQIUHH
7KHIORZUDWHRI+6JDVVKDOOEHDWOHDVWP/PLQSHUOLWUHRIWHVWVROXWLRQIRU
WKHILUVWPLQXWHVWKHUHDIWHUZKLOHPDLQWDLQLQJDSRVLWLYHSUHVVXUHRI+6JDV
WKH +6 IORZ UDWH PD\ EH UHGXFHG WR P/PLQ SHU OLWUH RI WHVW VROXWLRQ DQG
PDLQWDLQHGDWWKLVUDWHIRUWKHUHPDLQGHURIWKHWHVWSHULRG
x ([WUHPH SUHFDXWLRQ VKDOO EH WDNHQ QRW WR FRQWDPLQDWH WKH VSHFLPHQV ZKLFK
VKDOOEHKDQGOHGXVLQJRQO\GHJUHDVHGWRQJVRUFOHDQJORYHV6SHFLPHQVVKDOO
QRWEHFRDWHGLQDQ\ZD\EHIRUHH[SRVXUHLQWKHWHVWHQYLURQPHQW
x $VPDOOSRVLWLYHSUHVVXUHRI+6VKRXOGEHPDLQWDLQHGLQWKHWHVWFHOOE\WKHXVH
RI DQ RXWOHW WUDS WR SUHYHQW R[\JHQ FRQWDPLQDWLRQ IURP WKH DLU ,I DW DQ\ WLPH
GXULQJ WKH WHVW D ZKLWH KD]H FORXGV WKH VROXWLRQ WKH WHVW VKDOO EH VWRSSHG DQG
UHSHDWHGZLWKQHZVSHFLPHQVDQGIUHVKVROXWLRQ
7(6763(&,0(1/2&$7,21
7KHQXPEHUVL]HDQGORFDWLRQRIWKHWHVWVSHFLPHQVVKDOOEHLQDFFRUGDQFHZLWK1$&(
6WDQGDUG706HFWLRQ7HVW6SHFLPHQV²3UHVVXUH9HVVHO3ODWH
7HVWVSHFLPHQVVKDOOEHWRHQVXUHWKDWDOOSRUWLRQVRIWKHSODWHWKLFNQHVVDUHWHVWHG
$&&(37$1&(&5,7(5,$
&/5&65DQG&75VKDOOEHUHSRUWHGIRU
($&+VHFWLRQIURPHDFKVSHFLPHQH[DPLQHG
$YHUDJHRIWKUHHVHFWLRQVSHUVSHFLPHQ
$YHUDJHRIDOOVSHFLPHQV SHUSODWHV
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
7KHUHVXOWVRIHDFKVSHFLPHQLHWKHDYHUDJHRIWKHWKUHHVHFWLRQVH[DPLQHGVKDOOEH
XVHGIRUHYDOXDWLQJ+,&VXVFHSWLELOLW\ZLWKWKHIROORZLQJDFFHSWDQFHFULWHULD
&/5 &75 &65

$YHUDJHSHUVSHFLPHQDYHUDJHRI
WKHWKUHHVHFWLRQVH[DPLQHG
6LQJOH
7KHPD[LPXPLQGLYLGXDOFUDFNOHQJWKRQDQ\VHFWLRQVKDOOQRWH[FHHGPP
6XUIDFH%OLVWHULQJ± &UDFNVDVVRFLDWHGZLWKVXUIDFHEOLVWHULQJZKLFKDWQRSRLQWH[WHQG
PRUHWKDQPPIURPWKHVSHFLPHQVXUIDFHVDUHDFFHSWDEOH
&UDFNVH[WHQGLQJGHHSHUWKDQPPVKDOOEHHYDOXDWHGDVSHUDERYHFULWHULD¶V
,I DQ\ UHVXOW IDLOV WR PHHW WKH DERYH FULWHULD WKH KHDW RI VWHHO UHSUHVHQWHG E\ WKH WHVW
VKDOOEHUHMHFWHG
5(3257,1*
7KHPDWHULDOFHUWLILFDWHVKDOOEHLQDFFRUGDQFHZLWKRIWKLVVSHFLILFDWLRQLQFOXGLQJ
EXWQRWOLPLWHGWRWKHIROORZLQJLQIRUPDWLRQ
x 0HFKDQLFDO SURSHUWLHV RI PDWHULDOV WHVWHG DIWHU D VLPXODWHG KHDW WUHDWPHQW
F\FOH
x &KHPLFDODQDO\VLVLQFOXGLQJDQDO\VLVRIPLFURDOOR\HOHPHQWV
x 5HVXOWVRIFUDFNLQJHYDOXDWLRQLQGLFDWLQJLQGLYLGXDODQGDYHUDJH&/5&75DQG
&65IRUHDFKVHFWLRQFHUWLILHGDQGVLJQHGE\WKHWHVWLQJODERUDWRU\
x /RFDWLRQDQGGLPHQVLRQVRIVSHFLPHQV
x +HDWWUHDWPHQWFRQGLWLRQV
x 3KRWRPLFURJUDSKV RI WKH VSHFLPHQV VKRZLQJ FUDFNLQJ WRJHWKHU ZLWK
SKRWRPLFURJUDSKVRIDGMDFHQWPDWHULDOVWUXFWXUHV
o 8QHWFKHGVKRZLQJWKHW\SHRILQFOXVLRQVLQWKHVWHHOPDJQLILFDWLRQ
;
o (WFKHG VKRZLQJ WKH SDUHQW PDWHULDO PLFURVWUXFWXUH PDJQLILFDWLRQ
;
o $VVHVVPHQWRIPLFURVWUXFWXUHEDQGLQJSHU$670(
x S+ RI +6 VDWXUDWHG VROXWLRQ DW WKH EHJLQQLQJ DQG DW WKH HQG RI WKH WHVW DQG
W\SHRIVROXWLRQ
x 3KRWRJUDSKVRIVSHFLPHQVVKRZLQJDQ\EOLVWHU
x 7HVWUHVXOWV3DVV)DLO
x 8OWUDVRQLFWHVWUHVXOWV
,QDGGLWLRQVSHFLDOUHSRUWLQJLVUHFRPPHQGHGDVSHU2:1(5JXLGHOLQHVDVIROORZV
Document Number
5HY 3DJH
'RF
7\SH

5$3,' 3 28, 0&, 631
352-(&763(&,),&$7,21
&$5%2167((/3,3,1*$1'(48,30(17,1³:(7+6´
6(59,&(
x 7KH WHQGHQF\ WR EOLVWHU VKDOO EH UHSRUWHG DIWHU WKH YLVXDO H[DPLQDWLRQ DQG
SKRWRJUDSKVVKDOOEHWDNHQRIWKHWZRZLGHIDFHVRIHDFKFRXSRQWRVKRZDQ\
EOLVWHULQJ
)RU HDFK VHFWLRQ FRQWDLQLQJ FUDFNV RQH SKRWRJUDSK VKDOO EH WDNHQ VKRZLQJ
FRPSOHWHWUDQVYHUVHVHFWLRQV
ATTACHMENT D
MTO of CPVC Pipes, Fittings & Flanges
OWNER Doc No. :
MATERIAL REQUISITION FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY VINYL CHLORIDE (PVC-C)PIPING FOR SCOPE 2
SIZE 1 SIZE 2
Sl No. PMRC CODE SPEC NAME DESCRIPTION SCH. 1 SCH. 2 QTY. UoM
(NB) (NB)
TECHNICAL DATASHEET FOR PIPES
NM Pipe, Manufacturer's Standard, PN 10, PE , ASTM D1784, Cell Classification 23447 – Standard
1 PPTLMRAPEZZZ0F3K 1N341 15 - SCH-80 - 15 M
2 PPTLMRAPEZZZ1A3K 1N341 25 - SCH-80 - 915 M
TECHNICAL DATASHEET FOR FITTINGS
90 Deg Elbow, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard
6 NCRJMRASVZZZ1A3K 1N341 25 - SCH-80 - 175 Nos.
Equal Tee, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard
10 NHRJMRASVZZZ1A3K 1N341 25 - SCH-80 - 6 Nos.
Coupling, ASTM F439, PN 10, SE , ASTM D1784, Cell Classification 23447 – Standard Specification
14 RKRJMRZSVZZZ1A3K 1N341 25 - SCH-80 - 150 Nos.
for Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride CPVC)
15 RKRJMRZSVZZZ2A3K 1N341 50 - SCH-80 - 2 Nos.
16 RKRJMRASVZZZ4A3K 1N341 100 - SCH-80 - 3 Nos.
TECHNICAL DATASHEET FOR FLANGES
Flange, Manufacturer's Standard, PN 10, FFFE , ASTM D1784, Cell Classification 23447 – Standard
17 FTTLMRAFFZZZ0F3K 1N341 15 - SCH-80 - 36 Nos.
18 FTTLMRAFFZZZ1A3K 1N341 25 - SCH-80 - 62 Nos.
19 FTTLMRAFFZZZ1F3K 1N341 40 - SCH-80 - 10 Nos.
ATTACHMENT E
PMRC Datasheet of CPVC Pipes
Project
PIPING DATASHEET Doc No.
Pipe Class
Pipe, Non-Metallic(C-PVC) Printed Date
Rev No. 0 Sheet No. 1 OF 1
General
1 PMRC PPTLMRAPEZZZ0F3K
NM Pipe, Manufacturer's Standard, PE , ASTM D1784, Cell Classification 23447 – Standard Specification for Poly
2 Abbreviated Description
Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC), DN15
3 Unit of Issue M
Design Properties/Process Parameters Description
1 Standard ASTM D1784
2 Schedule SCH-80
3 Size DN 15
Body Construction/Design Features Description
1 Material C-PVC
2 Material, spec Chlorinated Poly Vinyl Chloride as per ASTM D1784
3 End preparation Plain End
Project
Pipe Class
General
1 PMRC PPTLMRAPEZZZ1A3K
3 Unit of Issue M
2 Schedule SCH-80
3 Size DN 25
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue M
2 Schedule SCH-80
3 Size DN 50
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue M
2 Schedule SCH-80
3 Size DN 80
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue M
2 Schedule SCH-80
3 Size DN 100
1 Material C-PVC
ATTACHMENT F
PMRC Datasheet of CPVC Fittings
Project
Pipe Class
Elbow, Non-Metallic(C-PVC) Printed Date
General
1 PMRC NCRJMRASVZZZ1A3K
Elbow, ASTM F439, SCH-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Poly Vinyl
Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC), DN25
3 Unit of Issue PC
1 Standard ASTM F439 / ASTM D1784
2 Schedule SCH-80
3 Size DN 25
1 Material C-PVC
3 Type 90 Deg Elbow, Long radius
4 End preparation Socket End
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 50
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 80
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 100
1 Material C-PVC
Project
Pipe Class
Tees,Equal,Socket End Non-Metallic(C-PVC) Printed Date
General
1 PMRC NHRJMRASVZZZ1A3K
Tee, ASTM F439, S-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Poly Vinyl
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 25
1 Material C-PVC
3 Type Equal Tee
Project
Pipe Class
General
Tee, ASTM F439, S-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Poly Vinyl
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 50
1 Material C-PVC
3 Type Equal Tee
Project
Pipe Class
General
Tee, ASTM F439, S-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Polyvinyl
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 80
1 Material C-PVC
3 Type Equal Tee
Project
Pipe Class
General
Tee, ASTM F439, S-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Polyvinyl
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 100
1 Material C-PVC
3 Type Equal Tee
Project
Pipe Class
Coupling, Socket End Non-Metallic(C-PVC) Printed Date
General
1 PMRC RKRJMRZSVZZZ1A3K
Coupling, ASTM F439, S-80, SE , ASTM D1784, Cell Classification 23447 – Standard Specification for Poly Vinyl
Chloride (PVC) and Chlorinated Poly Vinyl Chloride CPVC), DN25
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 25
1 Material C-PVC
3 Type Full Coupling
Project
Pipe Class
General
1 PMRC RKRJMRZSVZZZ2A3K
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 50
1 Material C-PVC
Project
Pipe Class
General
1 PMRC RKRJMRASVZZZ4A3K
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 100
1 Material C-PVC
ATTACHMENT G
PMRC Datasheet of CPVC Flanges
Project
Pipe Class
Flanges, Socket End Non-Metallic(C-PVC) Printed Date
General
1 PMRC FTTLMRAFFZZZ0F3K
Flange, Manufacturer's Standard, 150#, FFFE , ASTM D1784, Cell Classification 23447 – Standard Specification for
Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC), DN15
3 Unit of Issue PC
2 Schedule SCH-80
3 Flange Drilling Standard ANSI B.16.5, 150#,FF
3 Size DN 15
1 Material C-PVC
3 Type Flange with Adaptor
Project
Pipe Class
General
1 PMRC FTTLMRAFFZZZ1A3K
Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC), DN25
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 25
1 Material C-PVC
Project
Pipe Class
General
1 PMRC FTTLMRAFFZZZ1F3K
Poly Vinyl Chloride (PVC) and Chlorinated Poly Vinyl Chloride (CPVC), DN 40
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 40
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 50
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 80
1 Material C-PVC
Project
Pipe Class
General
3 Unit of Issue PC
2 Schedule SCH-80
3 Size DN 100
1 Material C-PVC
ATTACHMENT H
TOSP-P038-EXE-DEC-0001-PUR-PRC-0001
Shipping & Marking instruction procedure
NHN ZAR MAAR
.
Date: 21-Nov-21
CRS No: TOSP-P038-EXE-DEC-0001-PUR-PRC-0001_C-CRS
Rev No: C

Doc. No. TOSP-P038-EXE-DEC-0001-PUR-PRC-0001 Title: SHIPPING AND MARKING INSTRUCTION PROCEDURE X CODE 1, ACCEPTED
Rev. No. C
Transmittal No TOSP-P038-EXE-DEC-PRPCUF-TRM-0238
1 No Comment
2 no comment
Name: ZAIM AIMAN B C ROSLI Name: M AZHAR B A RAHMAN

Position: PROJECT Position: PROJECT
Internal
ATTACHMENT I
Vendor Compliance Sheet
a) Annexure 01
Vendor data requirement (With offer)
OWNER Doc No. :

DOCUMENTS TO BE SUBMITTED WITH TECHNO-COMMERCIAL BID - (Annexure-1)

MATERIAL REQUISITION FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY VINYL CHLORIDE (PVC-C)PIPING FOR
SCOPE 2
Sl No. Technical Document Yes/No Remarks
1 No. of offer copies to be submitted Yes No 2 Sets (Hard copies)
2 Filled up datasheet Yes No
3 Performance curves Yes No Not Applicable

4 P&ID Yes No Not Applicable
5 Design calculations Yes No
6 Compliance statement # Yes No
In case of no deviation vendor to furnish this

7 Deviation list # Yes No
list stating "NO DEVIATION"
8 Technical specs duly signed & stamped Yes No All vendor technical documents
9 Erection and Commissioning Spare Parts Yes No
Yes No
10 2 years Operation Spare parts Not Applicable
Yes No
11 Initial Spares Parts Not Applicable
Yes No
12 Consumable Spare Parts Not Applicable
13 Quality assurance plan Yes No
14 Typ. General arrangement drawing Yes No
15 Catalogues and brochures Yes No
16 Reference list for similar models Yes No
17 Manufacturing programme Yes No During DDE

18 Mfg. Progress report Yes No During DDE
19 Control Philosophy Yes No Not Applicable
20 Control Architect Drawing- PLC/DCS Yes No Not Applicable
21 Layout Diagram Yes No Not Applicable
22 Others (If any)
NOTES:
b) Annexure 02
Vendor data requirement ( after LOI)
OWNER Doc No. :

Sch. of
Sl No. Technical Document Hard Copy Soft Copy Remarks
Submission
1 No. of copies to be submitted Yes No Yes No 2 Copies
2 Filled up datasheet Yes No Yes No T+1W
3 P&ID Yes No Yes No T+1W Not Applicable
Yes No
4 General arrangement drawing No Yes T+1W
5 Detailed Cross Sectional Drawing Yes No Yes No T+1W
6 Lubrication Schedule Yes No Yes No T+1W Not Applicable

Yes No
7 Torque-Speed curve No Yes T+1W Not Applicable
Coupling drawing & filled in datasheet as per given
8 Yes No Yes No T+1W Not Applicable
format
Mechanical seal drawing & filled in datasheet as per Yes No Yes No
9 T+1W Not Applicable
given format
10 Catalogues and brochures Yes No Yes No T+1W
11 Reference list for similar models Yes No Yes No T+1W
12 Erection & Commissioning Spares parts Yes No Yes No T+1W
13 2 years Recommended Operational Spare parts Yes No Yes No T+1W
14 Initial Spare Parts Yes No Yes No T+1W

15 Consumable Spare parts Yes No Yes No T+1W
Yes No Yes No
16 Motor documents (Datasheets/GA/curves) T+1W Not Applicable
17 Erection/Operational manual Yes No Yes No T+1W Not Applicable

Yes
18 Quality & Inspection plan No Yes
No T+1W
19 Schedule Yes No Yes No T+1W

20 Detailed Manufacturing programme Yes No Yes No T+1W
21 Mgf. Progress report Yes No Yes No T+1W
22 Inspection reports with release notes Yes No Yes No Note: 1
23 Asbuilt Drawing Yes No Yes No Note: 1
24 Quality assurance plan Yes No Yes No T+1W
Yes No Yes No
25 Terminal details / Panel Wiring Detail T+1W Not Applicable
26 Material Test Certificates Yes No Yes No Receipt of Material

27 Warranty certificate Yes No Yes No Receipt of Material
28 Hazardous / Intrinsic safe approvals Yes No Yes No If required Not Applicable
29 Others (If any) Yes No Yes No
NOTES:
All the inspection reports shall be complied starting from material identification, in-process inspection to final inspection and release notes
1
issued by client/consultant.
2 Inspection reports should include welding procedures & its records approved by the inspection authority and Procedure for hydrotest
T - EFFECTIVE DATE; W: WEEKS FROM EFFECTIVE DATE
3
W - Callendar Week
c) Annexure 03
Compliance statement
OWNER Doc No. :

VA TECH WABAG
WABAG HOUSE, No. 17, 200 Feet Thoraipakkam - Pallavaram Main Road,
Sunnambu Kolathur, Chennai - 600 117, Tamil Nadu, India
COMPLIANCE STATEMENT (Annexure-3)

[Typical - To be submitted in vendor's letter head]
PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND COMMISSIONING OF TITANIUM NBL OUTSIDE

Project BATTERY LIMIT (N-OSBL) FACILITY
PROJECT FOR PENGERANG INTEGRATED COMPLEX
Project no 10P162
MATERIAL REQUISITION FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY VINYL CHLORIDE (PVC-C)PIPING
Equipment
FOR SCOPE 2
We confirm that our offer no:______ dated : _____ is entirely in compliant to your enquiry reference no. : MBG-PR-62462
Dt.20th Dec 2021 which comprises of the following :
1. PMRC Datasheet of CPVC Pipes / Fittings & Flanges
We confirm that no deviation is taken from the above specification, except the points listed in the deviation list.
We are attaching herewith the backup papers for justifying the deviation/superiority from the specification.
We agree that the deviations are subject to Client/Consultant approval. If the deviation is not approved by the Client, we will adhere to the specification/datasheet with
no time and cost implication.
Name of the Company
Address for Communication
Authorized Signatory
Company name and seal
d) Annexure 04
Deviation List
OWNER Doc No. :

LIST OF DEVIATION - CLARIFICATION - EXCEPTIONS - (Annexure-4)

MATERIAL REQUISITION FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY VINYL CHLORIDE
(PVC-C)PIPING FOR SCOPE 2
Reference Clause Of Description Of
Sl No. Reason For Deviation Remarks
Enquiry Deviation
e) Annexure 05
PTR Format
OWNER Doc No. :

PTR - FORMAT (PREVIOUS PROJECT / SUPLLY TRACK RECORD AND REFERENCES) - (Annexure-5)
FOR SCOPE 2
NAME OF NAME OF
NAME OF SUPPLIE YEAR OF TELEPHONE
SL.NO COMPANY/ CONTACT ADDRESS FAX NO E-MAIL ID
PLANT D MODEL COMMISSIONING NO
ORGANIZATION PERSON
f) Annexure 06
Check List
OWNER Doc No. :

CHECK LIST -(Annexure-6)

FOR SCOPE 2
S.No DESCRIPTION YES/NO/NA REMARKS
1 Relavant Standards to be mentioned by vendor Yes No NA
2 Painting specifications to be mentioned by vendor Yes No NA
3 Relavant specifications only attached Yes No NA
Proposal Qty Vs Engineering Qty (Varience Sheet includes Qty NA

4 Yes No
, MOC ,etc )
5 Any other details required – Project specific Yes No NA
6 Proven Track Record Format Yes No NA
7 Whether QTY in PR is full Yes No NA
8 Mention the PR is intended for Area/ Application Yes No NA
9 Safety standards to be taken care –If any specific Yes No NA
10 Protection standards –If any to be mentioned Yes No NA
11 Warranty requirements Yes No NA
12 2 years operational Spares Yes No NA
13 Erection & Commisoining Spares spares Yes No NA
14 Initial Spare Parts Yes No NA
15 Consumable Spare Parts Yes No NA
Documents required along with offer apart from regular Yes No NA
16 technical offer (Like curves/graphs/catalogue/drawings Refer sheet ''Doc. With BID''

–anything specific requirement , pls mention)
Performance Requirements as per contract (Wherever Yes No NA
17
applicable)
Yes No NA
18 Alternate offers requirements (If any –Items --Specific).
19 Software Requirements (If any –Specific) Yes No NA
20 3D modelling / Analysis /Investigation reports . Yes No NA

g) Annexure 07
Spares Parts List
OWNER Doc No. :

SPARE PARTS LIST (TO BE FILLED AND SUBMITTED BY VENDOR WITH OFFER) - (Annexure-7)
MATERIAL REQUISITION FOR PIPE/FITTINGS AND FLANGES - CHLORINATED POLY VINYL CHLORIDE (PVC-C)PIPING FOR
SCOPE 2
QUANTITY (UNIT) MAKER'S

DRAWING
NO / RECOMMEND
SERIAL PARTS NAME INSTALLED ADDRESS Unit Price REMARKS
PARTS ED NAME &
NO. MODEL NO.
PER ONE
QUANTITY
SET
Erection and
1 Commissioning
Spares
2 Initial Spares
Two Year
3
Operational Spares
4 Consumable Spare Parts

h) Annexure 08
Special Tools List
OWNER Doc No. :

LIST OF SPECIAL TOOLS (TO BE FILLED AND SUBMITTED BY VENDOR WITH OFFER) - (Annexure-8)
DRAWING NO
SERIAL. MANUFAC
TOOL NAME QUANTITY PRICE SKETCH REMARKS
NO TURER
PARTS NO.
i) Annexure 09
Utility Consumption List
OWNER Doc No. :

UTILITY LIST - REQUIREMENT (TO BE FILLED AND SUBMITTED BY VENDOR WITH OFFER)-(Annexure-9)
REQUIRED CONDITION
FLOW
FLUID NAME FOR USE OPERATION MODE PRESSURE TEMP. REMARK
RATE
(m /hr)
3
(bar g) ( C)
o
Mechanical specification
Seal Cooling Water
Service Air
Steam (if needed)
Flushing Water
Volt: Phase: Rating:
Required Electrical Power supply (A/C)
Frequency:
Required Electrical Power supply (DC)
Frequency:
Instrument Air requirement
Project specification
Seal Cooling Water
Service Air
Steam (if needed)
Flushing Water
Required Electrical Power supply (A/C)
Frequency:
Required Electrical Power supply (DC)
Frequency:
Instrument Air requirement
j) Annexure 10
Price Schedule
OWNER Doc No. :

PRICE SCHEDULE (TO BE FILLED AND SUBMITTED BY VENDOR WITH OFFER)-(Annexure - 10)
FOR SCOPE 2
Country of Unit Price Total
Item Description Q'ty
Origin FOB CIF Price
As per
PIPE/FITTINGS AND FLANGES
1 Data
- CPVC FOR SCOPE 2
Sheet
Total
NOTE:
ABOVE INDICATED PRICES INCLUDES, DESIGN, ENGINEERING, PROCUREMENT, MANUFACTURING, SHOP TESTING,
1 SUPPLY OF DRAWING, DOCUMENTS, MANUALS AS INDICATED IN SCHEDULE OF DOCUMENTS, PACKING, FORWARDING,
TRANSPORTATION, SUPERVISION OF INSTALLATION, TESTING AND COMMISSIONING ETC
2 INDICATE THE APPLICABLE TAXES, DUTIES, SERVICE CHARGES ETC SEPERATELY.

3 INDICATE THE CURRENCY ALSO.
Name of Bidder
Signature of Bidder
k) Annexure 11
Inspection and Test Plan
OWNER Doc No. :

INSPECTION TEST PLAN (Annexure -11)
PROVISION OF ENGINEERING, PROCUREMENT,

M/S PRPC Utilities and CONSTRUCTION AND COMMISSIONING OF TITANIUM
OWNER PROJECT
facilities Sdn. Bhd. NBL OUTSIDE BATTERY LIMIT (N-OSBL) FACILITY
PROJECT FOR PENGERANG INTEGRATED COMPLEX
CONTRACTOR : Wabag PROJECT NO 10P162
INSPECTION RATING: TBA
VENDOR Document No: TBA VENDOR NAME TBA
Legend : Inspection Agencies :

P –Perform RT - Radiography Test V - Vendor
W – Witness UT - Ultrasonic Test B - WMH/ Nominated agency
R – Review of documents Qty- Quantity C - Owner/Owner Nominated agency
RW-Random Witness CS- Carbon steel
H-Hold Point
IR–Inspection Report
DFT - Dry Film Thickness
MTC - Material Test Certificate
PO- Purchase order
Docs- Documents
PT- Penetrant Test
Rev Date Issued for Vendor Wabag

OWNER Doc No. :

INSPECTION TEST PLAN (Annexure -11)
Format Inspection Agency Remarks

Sl Type of Extent Reference Acceptance
Description Characteristics of
No Check of check documents Norms
Record V B C
1 REFERENCE DOCUMENTS- APPLICABLE
2 RAW MATERIAL IDENTIFICATION
3 INPROCESS INSPECTION
4 FINAL INSPECTION
5 PACKING & SHIPPING RELEASE
6 MANUFACTURER`s DATA BOOK (MDB)
7 INSPECTION RELEASE

Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0

Uploaded by

Copyright:

Available Formats

Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0

Uploaded by

Copyright:

Available Formats

What is the purpose of the document?

What is the purpose of the document?

What information is provided in the annexures?

What information is provided in the annexures?

OWNER Doc No.

PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION AND Revision : 0

PROJECT : PROVISION OF ENGINEERING,

CLIENT : PRPC UTILITIES AND FACILITIES SDN

CONTRACT NO. : PRPC/TC1/001/2021

DOCUMENT : MATERIAL REQUISITION FOR

Drawing / Document Number, Title and Revision: Transmittal Document Purpose:

No. Comments Confirmation / Explanation by Contractor

3 PIP : to attached as per latest MTO Noted & updated

Prepared by: Approved by:

Name: HAMDAN B SAID A Name: SHAHZULREZA B SAIFUL

From: Hudzaifah B Z Arifudin (GTS/PD&T) <hudzaifah.arifudin@petronas.com>

Dear Mr. Vijaya,

One (1) minor comment as follow:

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

0 24-06-22 Issued as Final

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

ID DESCRIPTION OWNER DISCIPLINE DOCUMENT SOURCE

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

1.0 PROJECT BACKGROUND ..................................................................................... 5

Attachment - B TOSP-P038-EXE-DEC-0001-PIP-DES-0001-Design Basis for Piping

Attachment - E PMRC Datasheet of CPVC Pipes

Attachment - F PMRC Datasheet of CPVC Fittings

Attachment - G PMRC Datasheet of CPVC Flanges

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

1.0 PROJECT BACKGROUND

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

This document contains the Material Requisition of PIPE/FITTINGS AND FLANGES -

OWNER : PRPC UTILITIES AND FACILITIES SDN BHD (PRPCUF)

SCOPE 2 : New Effluent Treatment Plant Unit 6335

SHALL : The word “shall” is to be understood to be mandatory.

SHOULD : The word “should” is to be understood as strongly

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

4.0 MATERIAL TO BE PURCHASED

5.0 REFERENCE DOCUMENTS

6.0 CODES AND STANDARDS

Codes & Standards shall as follows as per Piping Material Specification:

Flanges & Fittings:

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

It shall be the VENDOR’s responsibility to be aware of the specified Codes and

7.0 EXEPTIONS TO PROJECT SPECIFICATIONS AND CODES

It shall be VENDOR’s responsibility to be aware of the specified Standards and Codes

8.0 SCOPE OF SUPPLY / WORK FOR PIPE/FITTINGS AND FLANGES -

 All item shall be supplied in accordance with the dimension as stated in

 To provide packaging, handling, loading, transportation to site and to be

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

 VENDOR shall be deemed to have examined fully, understood and considered

 To present all the identified certificates including material and design

 VENDOR is required to present manufacturer’s QMS, sample of product

 It shall be the sole responsibility of VENDOR to notify Purchaser of any

9.0 INSPECTION AND TESTING

VENDOR is responsibility to comply with complete inspection, QAQC and testing

 Examinations and/or tests may be reviewed and/or witnessed by Purchaser or

 Inspection shall be performed as per “Vendor Quality Requirement form”

MATERIAL REQUISITION FOR PIPE/FITTINGS Revision : 0

ATTACHMENT 1 APPLICABLE MCF REQUIREMENTS

SHALL : The word shall is to be understood to be mandatory.

SHOULD : The word should is to be understood as strongly

RAPID-P0014-OUI-ENG-PRC-0001-6031 Project Procedure Units of

RAPID-P0014-OUI-MEC-DES-0001-9001 Project Specification Acoustic