TWO STAGE HEAVY OIL BURNERS

PRESS N SERIES
PRESS 30 N 85/171 342 PRESS 45 N 114/205 513 PRESS 60 N 171/342 684 PRESS 100 N 285/490 1140 kW kW kW kW

The PRESS N series of burners covers a firing range from 85 to 1140 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. Operation is two stage; a servomotor adjust automatically air damper opening, to obtain the right air delivery on both stage. The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption and is available in two different length to be selected on the basis of specific application requirements. In basic version the burners are supplied for use with heavy oil 7E viscosity, but they can be supplied with higher viscosity oil with a specific heaters kit. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head.

TS0042UK00

TECHNICAL DATA

Model Burner operation mode Modulation ratio at max. output Servomotor type run time Heat output Working temperature NCV Heavy Oil s kW Mcal/h kg/h C min./max. kWh/kg kcal/kg mm2/s (cSt) type delivery kg/h bar Max. C type Max. C Ph/Hz/V Ph/Hz/V type kW kW kW IP kW A A IP kW A A IP type Ignition transformer Operation Sound pressure dB (A) W mg/kWh N Bacharach mg/kWh mg/kWh V1 - V2 I1 - I2

PRESS 30 N

PRESS 45 N

PRESS 60 N

PRESS 100 N

Two stage 2:1 LKS 210 5 85/171342 73/147294 7,5/1530 114/205513 98/176441 10/1845 0/40 11,4 9800 50 (150 with heavy oil kit) D67 65 (20 bar) 20 140 YES Centrifugal with forward blades 60 1/50/230~(10%) 3N/50/400~(+10%) 1/50/230~(10%) RMO 3,5 0,33 2,8 3,7 0,45 2,8 40 ----0,37 2,9 9,5 0,45 1,9-1,1 9,5-5,5 54 -230 V - 2x6,5 kV 2 A - 35 mA
Intermittent (at least one stop every 24 h)

171/342684 147/294588 15/3060

285/4901140 245/421980 25/43100

Fuel / air data

Viscosity at 20C Pump

50 (500 with heavy oil kit) E4 E6 110 (20 bar) 200 (20 bar)

Atomised pressure Fuel temperature Fuel pre-heater Fan Air temperature Electrical supply Auxiliary electrical supply Control box Total electrical power Auxiliary electrical power Heaters electrical power Protection level

3/50/230~(+10%)

5,5 0,5 4,2

9,0 0,5 7

Electrical data

Pump motor electrical power Rated pump motor current Pump motor start up current Pump motor protection level Fan motor electrical power Rated fan motor current Fan motor start current Fan motor protection level

0,75 2,9-1,7 14-8

1,5 6-3,5 28-16

75

78
--

81 < 50 <5 -< 650

83

Emissions Approval

Sound power CO emission Grade of smoke indicator CxHy emission NOx emission level Directive Conforming to Certification

73/23 - 89/336 - 98/37- 92/42 EEC EN 267 --

Reference conditions: Ambient temperature: 20C Barometric pressure: 1013.5 mbar Altitude: 100 meters a.s.l. Noise measured at a distance of 1 meter.

Since the Company is constantly engaged in the production improvement, the aesthetic and dimensional features, the technical data, the equipment and the accessories can be changed. This document contains confidential and proprietary information of RIELLO S.p.A. Unless authorised, this information shall not be divulged, nor duplicated in whole or in part.

FIRING RATES

110 100 90 80 70 60 50 40 30 20 mm H2O

11

PRESS 100 N
10 9 8 7 6 5 4 3 2 hPa (mbar) 1 0 0 10 20 30 40 50 60 70 80 90 100 kg/h kW

PRESS 45 N PRESS 300 N

PRESS 30 N

10 0

100

200

300

400

500

600

700

800

900

1000

1100

Useful working field for choosing the burner

FUEL SUPPLY

HYDRAULIC CIRCUITS The burners are fitted with an oil pre-heater, a check valve and two delivery valves along the oil line from the pump to the nozzles. The oil pre-heater is equipped with a filter with sheath for thermometer, a setting thermostat to adjust the oil temperature and two safety thermostats to control the max. and min. oil temperature. A control device, on the basis of required output, regulates oil delivery valves opening, allowing oil passage trough the valves and the nozzles whose opening is regulated from a needle valve. An oil delivery gauge allow to control the delivery pressure. For heavy oil preheating, a special kit could be used; equipped with electrical heaters, it permits the employment of PRESS N burners with fuel oil of max. viscosity 20E at 50C (PRESS 30N - 45N) or 50E at 50C (PRESS 60 N 100 N), (see Burner Accessory paragraph).

Example of the hydraulic circuit on PRESS N

PRESS 30 N - 45 N - 60 N - 100 N
P S
Vg VS1 VS2

Pump with filter, heater and pressure regulator on the output circuit Oil preheater with filter, maximum, minimum and regulation thermostat Oil temperature regulator Max oil temperature switch Min oil temperature switch Check valve

TE
MM

S
TE TM Tm

V1 V2

U1 U2

TM Tm Vg

VS1 1st stage delivery valve

VS2 2nd stage delivery valve V1 V2 U1 U2 1st stage nozzle needle valve 2nd stage nozzle needle valve 1st stage nozzle 2nd stage nozzle

MM Oil delivery gauge

DIMENSIONING OF THE FUEL SUPPLY LINES The fuel feed must be completed with the safety devices required by the local norms. IMPORTANT NOTES - The oil could easily flow through the pipes if those are properly sized, protected and heated (by electricity, steam or hot water) - In order to limit gas or steam production the oil pressure into the gas separator shall be set in function of the supply temperature, see instructions manual. - The forwarding pump should have at least a double capacity than that one of the burner. For several burners supplied through the same ring supply line, the forwarding pump should have a capacity of approximatively 30% more than the sum of the single burners outputs.

RS2 Tank heater

Double pumping unit with filter and heater on transfer ring Double pumping unit with filter and heater on main ring Gas separator bottle Pump with heater burner circuit Electrical preheater Preheater safety valve Burner Flexible oil line Thermometer Max oil temperature switch Temperature switch regulation Vent valve Oil filter

SB2 Service tank P2

VR2 Oil valve main ring B P1 PS VS BR VGZ Safety valve burner circuit

PS T TE

MM TM

P1 VGZ VG B SB2 VR2 VC P2 P

TF1 T TM TE VC F

MM Oil delivery gauge

RS2

VENTILATION

The ventilation circuit of PRESS N burners is inserted in a extremely compact structure and it is provided with a forward blades centrifugal fan, which guarantees high pressure levels at the required air deliveries and permits installation flexibility. A servomotor adjust automatically air damper opening, to obtain the right air delivery on both stage.

Example of the servomotor for air regulation on PRESS N burners

COMBUSTION HEAD

Two different lenghts of the combustion head can be chosen for the various models of the PRESS N series of burners. The choice depends on the thickness of the front panel and the type of the boiler. Depending on the type of heat generator, it is necessary Min output to check the correct head penetration into the combustion chamber. The internal position of the combustion head can easily be adjusted: refer to the burner instruction manual for the complete procedure. Max output The following diagram shows the flame dimensions in relation to the burner output. The lenght and diameter shown in the diagram below should be employed preliminary check: it is required a more careful investigation Example of a PRESS N burner if combustion chamber dimensions are much different combustion head from the above reported values. Dimensions of the flame
4

Lm
3 Lenght of the flame (m)

ax

D L
Diameter of the flame (m)

Lm

in
1,5

D max
D min

0,5

0 0 1 2 3 4 Burner output (MW)

Example: Burner thermal output = 2000 kW; L flame (m) = 2,7 m (medium value); D flame (m) = 0,8 m (medium value)

WIRING DIAGRAMS

Electrical connections must be made by qualified and skilled personnel, according to the local norms.

TWO STAGE OPERATION PRESS 30 N - single-phase electrical connection

8 9 10 11 12 PS

TL

TB
2,5 mm2

IN

TR

PE L N 50Hz 230V

MB TS TL TR S TB IN T16A PS

- Burner terminal board - Safety thermostat - Threshold thermostat - High/low flame setting thermostat - External lock-out signal - Burner ground (earth) connection - Manual switch - 16A fuse - Lock-out reset button

PRESS 45 N - three-phase electrical connection

L N TS

S3 T1 30 T2 S
P

T6 TL

T8 V21V22 TR

T16A

T6A

IN

2,5 mm2

L
230V
3 3

~ 50Hz

PE L N L1 L2 L3

~ 50Hz

N L
230V

~ 50Hz 400/230V ~ 50Hz 230V

MB TS TL TR S F TB IN T6A T16A F PS L

- Burner terminal board - Safety thermostat - Threshold thermostat - High/low flame setting thermostat - External lock-out signal - Fuse (see table A) - Burner ground (earth) connection - Manual switch - 6A fuse - 16A fuse - Fuse (see table A) - Lock-out reset button - Lead section (see table A)

PRESS 60 N - 100 N - three-phase electrical connection

L N TS

S3 T1 30 T2 S
P

T6 TL

T8 V21V22 TR

F1

T6A

IN
MB TS TL TR S F TB IN T6A T16A F - F1 PS L - L1 - Burner terminal board - Safety thermostat - Threshold thermostat - High/low flame setting thermostat - External lock-out signal - Fuse (see table A) - Burner ground (earth) connection - Manual switch - 6A fuse - 16A fuse - Fuse (see table A) - Lock-out reset button - Lead section (see table A)

L1 PE L1 L2 L3 N
3 3

L L1 L2 L3
3 3

~ 50Hz 400/230V ~ 50Hz 230V

~ 50Hz
3 M

N L
230V

~ 50Hz 400/230V ~ 50Hz 230V

The following table shows the supply lead sections and the type of fuse to be used.

Model

PRESS 30 N
230V

PRESS 45 N
230V 400V

PRESS 60 N
230V 400V

PRESS 100 N
230V 400V

F L F1 L1

A mm2 A mm2

T16 2,5 -

T10 1,5 -

T6 1,5 -

T10 1,5 T16 4

T6 1,5 T10 2,5

T16 1,5 T25 6

T10 1,5 T16 4

Table A

OVERALL DIMENSIONS (mm)

BURNERS
A E G - G(1)

O - O (1)

Model PRESS 30 N PRESS 45 N PRESS 60 N PRESS 100 N

A 625 625 625 625

B 335 335 335 335

C 290 290 290 290

E 625 625 660 710

G 185 235 245 250 -

G(1) 320 370 400 410

H 161 161 172 195

I 305 305 335 370

O - O(1) 905 - 1080 925 - 1100 940 - 1115 1010 - 1195

(1) Length with extended combustion head

BURNER - BOILER MOUNTING FLANGE

Model
P R

P 160 160 160 195

PRESS 30 N PRESS 45 N PRESS 60 N PRESS 100 N

R 170 170 180 205

S M 10 M 10 M 10 M 12

PACKAGING

Z Y X - X(1)

Model PRESS 30 N PRESS 45 N PRESS 60 N PRESS 100 N

X 880 880 925 985

X(1) 1015 1015 1095 1145

Y 690 690 760 790

Z 522 522 552 552

kg 84 84 87 104

(1) Length with extended combustion head