Document Information for: 5102783PSP

Type Drawing Print

Name 5102783PSP
Revision 10
State Release
ECO 2097860
Description software, shim tool
Originator 500286366_cynthia_m_lee

File List
1. 5102783PSP_s1_r10.pdf
2. 5102783PSP_s1_r10.doc
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

Approval Information
See the GEHC Myworkshop System to determine the status of this document.

Person Action Date and Time

212001567_clifford_j_ginfrida Approved 02/08/2010 4:34:36 PM GMT
212037968_yuteng__chen Approved 02/09/2010 1:36:06 PM GMT

This page is generated automatically by the GEHC MyWorkshop System.

Printed documents are for Reference Only and may be out-of-date.
Check the database to ensure you have the correct revision.

Approved Document - 5102783PSP_r10.pdf Page 1 of 5

 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES

TOLERANCES ON: 2 PL DECIMALS ± ANGLES ±

3 PL DECIMALS ± FRACTIONS ±

REV DESCRIPTION DATE REVISED BY

1 Complete 03-Oct-09 R.Hackett

Change shimtool reference from 2.5 to X.X to allow for future shimtool
2 04-Jan-14 R. Hackett
revisions and define label color and format per ECO 2001340.

3 Revised Sections 1, 2, 3, and updated disc label format per ECO 2007368. 04-Oct-14 R. Hackett

4 Revised Section 2 per ECO 2007659 04-Oct-15 R. Hackett

Revised section 2.0 to remove software version. Updated install file to

allow execution with Windows 2000 or XP systems. Added list of files
5 05-Jun-21 R. Hackett
contained on install disc. Corrected Figure 1 to reflect disc label per
ECO 2015753.
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

6 Revised Section 2.0 & 3.0 and Figure 1 per ECO 2033455 06-Sep-01 R. Hackett

Revised Table in Section 2.0; revised Section 3.0; removed Page 4 per
7 07-Aug-08 R. Hackett
ECO 2046633
Revised Table in Section 2.0 to add XRMB_0_25mm.cal file for
8 Signa750 3T; revised Section 3.0 to change color to white per 08-Jul-30 R. Hackett
ECO 2062823.
Revised Section 1.0 to add MR450 1.5T magnet; revised Table in Section
9 2.0 to add *.cal, *.fmt, *.tol files for MR450 1.5T magnet; update si file, 09-Apr-14 D. Turner
update to ShimTool 2.5d per ECO 2081501.
Revised section 1.0 to add MR450w; revised Table in Section 2.0 to add
10 10-Feb-04 C. J. Ginfrida
*.cal, *.fmt, *.tol files for MR450w per ECO 2097860
See the GEHC Myworkshop System to determine the status of this document.

ORIGINATORS GENERAL e ELECTRIC

DRAWN R. Hackett 03-Oct-09 DEPT. MAGNET SYSTEMS LCTN. FLORENCE, SC

CHECKED R. Hackett 03-Oct-09

ENGRG M. Xu 03-Oct-09
MFG. J. Bryant 03-Oct-09
SOFTWARE, G3 SHIMMING
SOURCING T. Bokelman 03-Oct-09

REVISED C. Lee 10-Feb-04 SIZE FSCN NO DWG NO

A 5102783PSP
Function Name (YMD) SCALE REV 10 Page 1 of 4
Approved Document - 5102783PSP_r10.pdf Page 2 of 5
 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES

TOLERANCES ON: 2 PL DECIMALS ± ANGLES ±

3 PL DECIMALS ± FRACTIONS ±

1.0 PURPOSE

The purpose of this specification is to define the shim software disc used for shimming G3
(LCC300) 3.0T, MR450w, and MR450 1.5T magnets.

2.0 DEFINITION

Compact disc containing shim software, calibration files, si files, configuration files, tol
files, txt files, cmd files, inf files, exe files, fmt files, dll files, and pwd files required to shim
LCC300 Corona 3.0T magnets or MR450 1.5T magnets.

The disc contains the following files which are not installed:
Item File Name
1 Pre-Install Instructions.doc
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

2 Readme.txt
3 Install.cmd
4 Autorun.inf

The following files are also on the disk and are installed on the target computer.
Item File Name
1 ShimTool Validation Release Letter.pdf
2 BatchST.exe
3 Corona ShimTool.lnk
4 Corona-SpecVols.fmt
See the GEHC Myworkshop System to determine the status of this document.

5 Cylindrical_Corona_field_xp.si or
Cylindrical_Corona_field_2k.si
6 DVw.tol
7 DVw-45fov-unified.fmt
8 DVw_PassiveSiFe.cal
9 G3Unified5V.fmt
10 G3UnifiedTarget.fmt

ORIGINATORS GENERAL e ELECTRIC

DRAWN R. Hackett 03-Oct-09 DEPT. MAGNET SYSTEMS LCTN. FLORENCE, SC

CHECKED R. Hackett 03-Oct-09

ENGRG M. Xu 03-Oct-09
MFG. J. Bryant 03-Oct-09
SOFTWARE, G3 SHIMMING
SOURCING T. Bokelman 03-Oct-09

REVISED C. Lee 10-Feb-04 SIZE FSCN NO DWG NO

A 5102783PSP
Function Name (YMD) SCALE REV 10 Page 2 of 4
Approved Document - 5102783PSP_r10.pdf Page 3 of 5
 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES

TOLERANCES ON: 2 PL DECIMALS ± ANGLES ±

3 PL DECIMALS ± FRACTIONS ±

2.0 Cont'd

11 LCC-4vol-393Unified.fmt
12 LCC-4vol-393-SpecVols.fmt
13 LCC-393Unified.fmt
14 LCC-Camera.fmt
15 G3UnifiedTarget.tol
16 RS393b.tol
17 libCmd.dll
18 libIO.dll
19 libShim.dll
20 libUtil.dll
21 libWinShim.dll
22 libWinUtil.dll
23 mfc71.dll
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

24 MSVCP71.DLL
25 msvcr71.dll
26 OpenSpeed.si
27 ShimTool.cfg
28 ShimTool.pwd
29 ShimTool25D.exe
30 WB_CoronaSC_MarkIII.cal
31 W_CoronaCamera50dsv.fmt
32 W_CoronaP.cal
33 W_CoronaP41.cal
34 W_CoronaSC.cal
See the GEHC Myworkshop System to determine the status of this document.

35 W_CoronaSC_MarkII.cal
36 XRMB_0_25mm.cal
37 RS393SC.cal
38 RB_SC.cal

ORIGINATORS GENERAL e ELECTRIC

DRAWN R. Hackett 03-Oct-09 DEPT. MAGNET SYSTEMS LCTN. FLORENCE, SC

CHECKED R. Hackett 03-Oct-09

ENGRG M. Xu 03-Oct-09
MFG. J. Bryant 03-Oct-09
SOFTWARE, G3 SHIMMING
SOURCING T. Bokelman 03-Oct-09

REVISED C. Lee 10-Feb-04 SIZE FSCN NO DWG NO

A 5102783PSP
Function Name (YMD) SCALE REV 10 Page 3 of 4
Approved Document - 5102783PSP_r10.pdf Page 4 of 5
 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES

TOLERANCES ON: 2 PL DECIMALS ± ANGLES ±

3 PL DECIMALS ± FRACTIONS ±

3.0 LABELLING

Each disc shall have a label applied to the front face.

Disc labels shall contain the part number, revision, description and GE indentification.
Disc label background shall be white.
Disc label text/lines shall be Black.

4.0 PACKAGING

Each disc shall be placed in a disc case.

Disc(s) shall be placed in a box and sealed from dirt and moisture.
Each box shall be marked with the part number and revision.
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.

ORIGINATORS GENERAL e ELECTRIC

DRAWN R. Hackett 03-Oct-09 DEPT. MAGNET SYSTEMS LCTN. FLORENCE, SC

CHECKED R. Hackett 03-Oct-09

ENGRG M. Xu 03-Oct-09
MFG. J. Bryant 03-Oct-09
SOFTWARE, G3 SHIMMING
SOURCING T. Bokelman 03-Oct-09

REVISED C. Lee 10-Feb-04 SIZE FSCN NO DWG NO

A 5102783PSP
Function Name (YMD) SCALE REV 10 Page 4 of 4
Approved Document - 5102783PSP_r10.pdf Page 5 of 5