Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Removal Procedure: Notice

    Uploaded by

    A
    21 views2 pages

    Original Title

    9u6891

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    21 views2 pages

    Removal Procedure: Notice

    Uploaded by

    A

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    01/08/2022 12:32 SIS 2.

    2001/11/09 Electronic Unit Injector Sleeve - Remove (RENR4360-06)

    SMCS - 1713 i01617214 

    Removal Procedure
    Required Tools 
    Tool  Part Number  Part Description  Qty 
    9U-7259  Puller Stud  1 
    128-7889 Bridge Puller  1 
    A(1)  9U-6877 Thrust Bearing  1 
    5P-8247 Hard Washer  1 
    4K-0367 Nut  1 

    Table 1
    (1)
    The tools that are listed in the chart are part of the 9U-6891 Injector Tool Group.

    Start By:

    a. Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".

    NOTICE
    Keep all parts clean from contaminants.

    Contaminants may cause rapid wear and shortened component


    life.

    Illustration 1 g00512128

    1. Install the puller stud from Tooling (A) into the unit injector sleeve.

    Illustration 2 g00512002

    2. Install the following parts from Tooling (A) over the puller stud: bridge puller, thrust bearing, hard washer and nut.

    3. Tighten the nut until the unit injector sleeve is pulled free of the cylinder head assembly.

    4. Remove Tooling (A) from the unit injector sleeve.

    5. Repeat Steps 1 through 4 in order to remove the remaining unit injector sleeves.

    https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Electronic%2520Unit%2520Injector%2520Sleeve%2520-%2520Remove%2520(RENR4360-06)%2522%252C%2522formattedPubli… 1/2
    01/08/2022 12:32 SIS 2.0

    BGF1-UP, BKL1-UP, BMR1-UP

    PPW-80043209
    2022/08/01
    10:32:17+02:00
    i01617214
    © 2022 Caterpillar Inc.
    Caterpillar:
    Confidential Green

    https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Electronic%2520Unit%2520Injector%2520Sleeve%2520-%2520Remove%2520(RENR4360-06)%2522%252C%2522formattedPubli… 2/2

    You might also like