Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    Lubrication Chart

    Uploaded by

    kaushal kishore
    This document provides lubrication oil recommendations for various applications in the SP-70 plant, including the extractor belt, skip hoist, mixer gearbox, screw conveyor, air compressor, hydraulic power pack, oil bath filter, bearing blocks, and mixer shaft sealing. It lists the recommended oil type and quantity needed at initial start-up and regular maintenance intervals of 150-500 hours or 100-250 hours depending on the application. Special remarks provide additional guidance for several applications.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Lubrication Chart

    Uploaded by

    kaushal kishore
    118 views2 pages
    This document provides lubrication oil recommendations for various applications in the SP-70 plant, including the extractor belt, skip hoist, mixer gearbox, screw conveyor, air compressor, hydraulic power pack, oil bath filter, bearing blocks, and mixer shaft sealing. It lists the recommended oil type and quantity needed at initial start-up and regular maintenance intervals of 150-500 hours or 100-250 hours depending on the application. Special remarks provide additional guidance for several applications.

    Original Title

    LUBRICATION CHART

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides lubrication oil recommendations for various applications in the SP-70 plant, including the extractor belt, skip hoist, mixer gearbox, screw conveyor, air compressor, hydraulic power pack, oil bath filter, bearing blocks, and mixer shaft sealing. It lists the recommended oil type and quantity needed at initial start-up and regular maintenance intervals of 150-500 hours or 100-250 hours depending on the application. Special remarks provide additional guidance for several applications.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    118 views2 pages

    Lubrication Chart

    Uploaded by

    kaushal kishore
    This document provides lubrication oil recommendations for various applications in the SP-70 plant, including the extractor belt, skip hoist, mixer gearbox, screw conveyor, air compressor, hydraulic power pack, oil bath filter, bearing blocks, and mixer shaft sealing. It lists the recommended oil type and quantity needed at initial start-up and regular maintenance intervals of 150-500 hours or 100-250 hours depending on the application. Special remarks provide additional guidance for several applications.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 2

    LUBRICATION OIL LIST FOR SP-70 PLANT

    Plant Model APPLICATION RECOMMENDED OIL QTY. 1 ST CHANGE HOURS 2 ND CHANGE SUBSEQUENT HOURS SPECIAL REMARKS
    Breather plug & drain plug should be fix in proper position.
    Extractor Belt SERVOMESH-320 10 150 500 Every 500 Hours Check the breather hole for proper ventilation.

    It is necessary to stop the unit after 10-15 min. of running &


    Skip hoist SERVOMESH-320 6 150 500 Every 500 Hours Check oil level. Fill if necessary to restore the max.

    Each reduction will consume 8 Lt. oil. Please check the


    Mixer Gbox SERVOMESH-150 17 200 500 Every 500 Hours braether for proper ventilation.
    Gear unit model & Oil qty. are mentioned for std. supply
    Screw Conveyor SERVOMESH- 220 /SERVOMESH - screw ie. 219 X 10 Mtrs. Given details may vary depend on
    3 150 500 Every 500 Hours
    GB 150 screw type. Oil qty. mentioned per unit.
    Mentioned oil is specially recommended by ANEST IWATA
    Air Compressor AIMAIR LUBE OIL 1.5 100 200 Every 200 Hours for their reciprocating air compressor.
    SP-70 (SKIP)
    Hydraulic Power Should be covered from dust & water.
    SERVOSYSTEM HLP 68 15 100 250 Every 250 Hours
    pack

    FRL Unit ENGINE OIL 20W40 0.25 Periodically - As per low level mark on container Should be covered from dust.

    Oil bath filter - Please check for level defines hole in oil container. Should
    ENGINE OIL 20W40 0.25 Periodically - As per low level mark on container be covered from dust & water.
    Compressor

    Approx. 4-5 All bearing & blocks. Suitable for Multi purpose - Lithium
    Bearing blocks AP-3 or MP-3 Grade grease Periodically - At regular intervals based on usage of machine. based Grease (AP or MP)
    Kgs.

    GREASE WITH CONSISTENCY Grease should be suitable for use under extreme pressure
    Mixer shaft sealing 2 Kgs. Periodically - As per low level mark on container & machine usage. (EP). Eg. In HP brand LITHON EP1
    CLASS NLGI 1 (EP1)

    You might also like