Data sheet 3RU2126-4BB0

Overload relay 14...20 A Thermal For motor protection Size S0, Class 10
Contactor mounting Main circuit: Screw Auxiliary circuit: Screw Manual-
Automatic-Reset

product brand name SIRIUS

product designation thermal overload relay
product type designation 3RU2
General technical data
size of overload relay S0
size of contactor can be combined company-specific S0
power loss [W] for rated value of the current at AC in hot 8.1 W
operating state
● per pole 2.7 W
insulation voltage with degree of pollution 3 at AC rated 690 V
value
surge voltage resistance rated value 6 kV
maximum permissible voltage for safe isolation in
networks with grounded star point
● between auxiliary and auxiliary circuit 440 V
● between auxiliary and auxiliary circuit 440 V
● between main and auxiliary circuit 440 V
● between main and auxiliary circuit 440 V
shock resistance according to IEC 60068-2-27 8g / 11 ms
type of protection according to ATEX directive Ex II (2) GD
2014/34/EU
certificate of suitability according to ATEX directive DMT 98 ATEX G 001
2014/34/EU
reference code according to IEC 81346-2 F
Substance Prohibitance (Date) 10/01/2009
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -40 ... +70 °C
● during storage -55 ... +80 °C
● during transport -55 ... +80 °C
temperature compensation -40 ... +60 °C
relative humidity during operation 10 ... 95 %
Main circuit
number of poles for main current circuit 3
adjustable current response value current of the 14 ... 20 A
current-dependent overload release
operating voltage
● rated value 690 V
● at AC-3e rated value maximum 690 V
operating frequency rated value 50 ... 60 Hz

3RU21264BB0 Subject to change without notice

9/21/2022
Page 1/5 © Copyright Siemens
 operational current rated value 20 A
operational current at AC-3e at 400 V rated value 20 A
operating power
● at AC-3
— at 400 V rated value 7.5 kW
— at 500 V rated value 11 kW
— at 690 V rated value 15 kW
● at AC-3e
— at 400 V rated value 7.5 kW
— at 500 V rated value 11 kW
— at 690 V rated value 15 kW
Auxiliary circuit
design of the auxiliary switch integrated
number of NC contacts for auxiliary contacts 1
● note for contactor disconnection
number of NO contacts for auxiliary contacts 1
● note for message "Tripped"
number of CO contacts for auxiliary contacts 0
operational current of auxiliary contacts at AC-15
● at 24 V 3A
● at 110 V 3A
● at 120 V 3A
● at 125 V 3A
● at 230 V 2A
● at 400 V 1A
operational current of auxiliary contacts at DC-13
● at 24 V 2A
● at 60 V 0.3 A
● at 110 V 0.22 A
● at 125 V 0.22 A
● at 220 V 0.11 A
contact rating of auxiliary contacts according to UL B600 / R300
Protective and monitoring functions
trip class CLASS 10
design of the overload release thermal
UL/CSA ratings
full-load current (FLA) for 3-phase AC motor
● at 480 V rated value 20 A
● at 600 V rated value 20 A
Short-circuit protection
design of the fuse link
● for short-circuit protection of the auxiliary switch fuse gG: 6 A, quick: 10 A
required
Installation/ mounting/ dimensions
mounting position any
fastening method Contactor mounting
height 85 mm
width 45 mm
depth 85 mm
Connections/ Terminals
product component removable terminal for auxiliary No
and control circuit
type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control circuit screw-type terminals
arrangement of electrical connectors for main current Top and bottom
circuit
type of connectable conductor cross-sections
● for main contacts
— solid or stranded 2x (1 ... 2.5 mm²), 2x (2.5 ... 10 mm²)

3RU21264BB0 Subject to change without notice

9/21/2022
Page 2/5 © Copyright Siemens
 — finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), 1x 10 mm²
● at AWG cables for main contacts 2x (16 ... 12), 2x (14 ... 8)
type of connectable conductor cross-sections
● for auxiliary contacts
— solid or stranded 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● at AWG cables for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14)
tightening torque
● for main contacts with screw-type terminals 2 ... 2.5 N·m
● for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m
design of screwdriver shaft Diameter 5 ... 6 mm
size of the screwdriver tip Pozidriv PZ 2
design of the thread of the connection screw
● for main contacts M4
● of the auxiliary and control contacts M3
Safety related data
failure rate [FIT] with low demand rate according to SN 50 FIT
31920
MTTF with high demand rate 2 280 y
T1 value for proof test interval or service life according to 20 y
IEC 61508
protection class IP on the front according to IEC IP20
60529
touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front
Display
display version for switching status Slide switch
Certificates/ approvals
For use in hazard-
General Product Approval
ous locations

Confirmation

For use in hazard-

Declaration of Conformity Test Certificates Marine / Shipping
ous locations

Special Test Certific- Type Test Certific-

ate ates/Test Report

Marine / Shipping

other Railway

Confirmation Vibration and Shock

3RU21264BB0 Subject to change without notice

9/21/2022
Page 3/5 © Copyright Siemens
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RU2126-4BB0
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RU2126-4BB0
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RU2126-4BB0
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RU2126-4BB0&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RU2126-4BB0/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RU2126-4BB0&objecttype=14&gridview=view1

3RU21264BB0 Subject to change without notice

9/21/2022
Page 4/5 © Copyright Siemens
 RESET

STOP
TEST

95

97

-F
2/T1

4/T2

6/T3

96

98

last modified: 3/8/2022

3RU21264BB0 Subject to change without notice

9/21/2022
Page 5/5 © Copyright Siemens