The document provides instructions for using the Reconnect DBTH302 wireless headphones, including how to charge the headphones, pair them with a Bluetooth device, switch between paired devices, and use various functions like play/pause, volume control, and answering phone calls. The headphones have a Bluetooth version 5.0, range of 10m, up to 24 hours of play time on a single charge, and can pair with two devices simultaneously.
The document provides instructions for using the Reconnect DBTH302 wireless headphones, including how to charge the headphones, pair them with a Bluetooth device, switch between paired devices, and use various functions like play/pause, volume control, and answering phone calls. The headphones have a Bluetooth version 5.0, range of 10m, up to 24 hours of play time on a single charge, and can pair with two devices simultaneously.
The document provides instructions for using the Reconnect DBTH302 wireless headphones, including how to charge the headphones, pair them with a Bluetooth device, switch between paired devices, and use various functions like play/pause, volume control, and answering phone calls. The headphones have a Bluetooth version 5.0, range of 10m, up to 24 hours of play time on a single charge, and can pair with two devices simultaneously.
The document provides instructions for using the Reconnect DBTH302 wireless headphones, including how to charge the headphones, pair them with a Bluetooth device, switch between paired devices, and use various functions like play/pause, volume control, and answering phone calls. The headphones have a Bluetooth version 5.0, range of 10m, up to 24 hours of play time on a single charge, and can pair with two devices simultaneously.
wireless Headphone. 1.Charging Here are a few steps to help you get started. Function Operation When the headphone battery is low RED LED blinks every second,a low BT Version Ver 5.0 battery voice prompt is also played. Press and hold the Multifunction button Power ON/OFF for 3 seconds to power ON,5 seconds Connect the micro USB cable provided with the product to 5V adaptor and Range 10m to power OFF connect the other side to charging input of the headphone.Solid RED LED indicates charging status and LED turns off when fully charged. RECONNECT WIRELESS HEADPHONE ONB Play/Pause Press the Multifunction button SN Ratio ＞70dB DBTH302 Volume +/- Press the Volume+/- button 2.Pairing Distortion ＜1% 1)Make sure the headphone and your BT device are next to each Play Next/Previous Press and hold the Volume+/- button other(within 1m) Play Time Up to 24 hours(80% volume) Answer Phone Call Press the Multifunction button 2)Press and hold the Multifuction button for 7 seconds to bring the headphone into pairing mode with the LED indicator flashing blue and red Battery Capacity 350mAh End Phone Call Press the Multifunction button alternately 3)Active BT function on your BT device and search for the nearby BT Reject Phone Cal Press and hold the Multifunction button connection Charging Time 2.5 hours Double press the Multifunction button 4)Find“Reconnect DBTH302” in the search results.Tap on the name to Redial Standby Time 200 days to re-dial the latest phone number connect.Once connected,only the blue LED will blink in 5 second intervals Do’s When headphone is off,press the Always drop your used electronic products,batteries and accessories Pairing Mode 3.Multi Device Pairing after end of their life in nearest authorized collection point/center or Multifuction button for 7 seconds Reconnect Wiress headphone can be connected with two BT enabled hand over to authorized recycler for disposal. Extra Bass ON/OFF Press the Bass button devices simultaneously Drop the discarded Electronics Equipment’s only in the bins meant 1)Connect the headphone with the first device as described in pairing. for the Electronic Waste. Press and hold the Multifuction button Don'ts 2)Then connect the second device as described in pairing. Voice Assistant for 2 seconds.Phone must have Aux input Port Microphone Siri/Google assistant/Alexa installed 4.Wired Connect Do not dispose damaged or leaking Lithium ion(Li-ion) battery with Reconnect DBTH302 is not only a wireless headset,but also a wired normal household waste. headset. With the included audio cable, you can still enjoy music when the Information for improper disposal & handling battery runs low.Connect one end of the cable to the aux input port of the USB Charging Port headphone and other end to aux output of any device. Any disposal through unauthorized agencies/person will attractaction under Environmental(Protection) Act1986. In the Aux mode buttons doesn’t work. LED Indicator If batteries are not properly disposed off,it can cause harm to human Solid Red LED health or the environment. Mulifunction Button Note: For more information on safe disposal and recycling,please call on toll free ● Please note the “L” and“R” markings on the headphone, they correspond Volume- / Previous Track Pairing mode/ number 1800-103-7392 or visit our website http://www.reliancedigital. to left side and right side respectively in/ewastepolicy.html Disconnected from BTdevice ● If a PIN code is required for pairing, please try“0000" (4 zero) Extra Bass Button ● The BT headphone can remember previous paired devices. DEAR CUSTOMER: Blue Led blinks in 5 second This product is RoHS compliant Connected to BT device If you have previously paired the headphone with a device, simply turn on Thank you for buying this product! Volume+ / Next Track intervals your device and the headphone (by pressing the Multifunction button for 3 Prior to first use, please read the manual carefully. Flash red every second Low Battery seconds to turn on), they will connect the last connected device Warranty Card automatically without going into pairing mode.
