Dsat1000s Series
Dsat1000s Series
TABLE OF CONTENTS
Chapter 1 Working Environment and Installation ........................................................................ 5
1.1 Environment of Equipment Room............................................................................................ 5
1.1.1 Power Supply System ...................................................................................................... 5
1.1.2 Temperature and Humidity of Equipment Room ............................................................ 5
1.2 Installation and Initial Power-on .............................................................................................. 7
1.3 Notes for Installation ................................................................................................................ 7
Chapter 2 Appearance and Installation ....................................................................................... 8
2.1 Device Appearance................................................................................................................... 8
2.1.1 Chassis Appearance......................................................................................................... 8
2.1.2 Front Panel ...................................................................................................................... 8
2.1.3 Description of Buttons in Front Panel ............................................................................. 9
2.1.4 Rear Panel ..................................................................................................................... 11
2.2 Install Accessories .................................................................................................................. 13
2.2.1 Installation Requirement............................................................................................... 13
2.2.2 Install HDD ..................................................................................................................... 14
2.3 Startup .................................................................................................................................... 16
2.4 Shutdown ............................................................................................................................... 17
Chapter 3 Network ................................................................................................................... 18
3.1 Activate Storage System ......................................................................................................... 18
3.2 Configure Network Parameters.............................................................................................. 18
3.2.1 Modify Network Parameters ......................................................................................... 18
3.2.2 Modify IP Address of Bond Network Interface ............................................................. 20
Chapter 4 System Configuration................................................................................................ 21
4.1 One-Key Configuration ........................................................................................................... 21
4.2 Format Storage Space ............................................................................................................ 22
4.2.1 Activate Hybrid SAN Sub-System .................................................................................. 22
4.2.2 Format Storage Space ................................................................................................... 22
Chapter 5 Basic Configuration ................................................................................................... 23
5.1 Camera Management............................................................................................................. 23
5.2 Configure Recording Schedule ............................................................................................... 24
5.3 Live View ................................................................................................................................ 25
5.4 Playback.................................................................................................................................. 25
1
DS-AT1000S Series Storage System Quick Start Guide
2
DS-AT1000S Series Storage System Quick Start Guide
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
The device is advised to note that as a seller or a business user (Class A) Devices and intended for
use outside the Home area.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU, the LVD Directive 2014/35/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
3
DS-AT1000S Series Storage System Quick Start Guide
Applicable Models
This manual is applicable to the models listed in the following table.
Series Model
DS-AT1000S/224
DS-AT1000S
DS-AT1000S/336
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
4
DS-AT1000S Series Storage System Quick Start Guide
5
DS-AT1000S Series Storage System Quick Start Guide
6
DS-AT1000S Series Storage System Quick Start Guide
7
DS-AT1000S Series Storage System Quick Start Guide
8
DS-AT1000S Series Storage System Quick Start Guide
DS-AT1000S/336
9
DS-AT1000S Series Storage System Quick Start Guide
system.
The indicator shows green when the system is
running.
Positioning button and Press this button or click Positioning on GUI to
indicator trigger locating function. Press the button again
to disable locating function.
The indicator flashes in blue when locating
function is triggered.
Mute button and alarm When an alarm is triggered, the indicator flashes in
indicator red and buzzer beeps. Press the button to stop
beeping.
Power indicator for controller A When controller A is connected and is running, the
indicator is green.
Power indicator for controller B When controller B is connected and is running, the
indicator is green.
Fault indicator for controller A When a fault occurs in controller A, the indicator
flashes in red.
When controller A does not exit, the indicator is
unlit.
Fault indicator for controller B When a fault occurs in controller B, the indicator
flashes in red.
When controller B does not exit, the indicator is
unlit.
DS-AT1000S/224
10
DS-AT1000S Series Storage System Quick Start Guide
Power switch and indicator When the system is off, press the button to turn
on it.
When the system is running, hold the button for
at least 4s and not more than 15s to turn off the
system.
The indicator shows green when the system is
running.
Positioning button and Press this button or click Positioning on GUI to
indicator trigger locating function. Press the button again
to disable locating function.
The indicator flashes in blue when locating
function is triggered.
Mute button and alarm When an alarm is triggered, the indicator flashes in
indicator red and buzzer beeps. Press the button to stop
beeping.
DS-AT1000S/336
11
DS-AT1000S Series Storage System Quick Start Guide
DS-AT1000S/224
12
DS-AT1000S Series Storage System Quick Start Guide
13
DS-AT1000S Series Storage System Quick Start Guide
In order to avoid damages during transportation, it is recommended to package and transport the
hard disks separately with the chassis of network storage system.
Installing HDD
Follow the steps below to install HDDs.
Step 1 Remove the front panel cover.
1) Unlock the front panel cover with delivered key.
2) Hold the cover and pull it out till it gets out of the control of the lock.
3) Move the cover to right to remove it from front panel.
Step 2 Press the spring lock of the HDD on the left, drag the handle and then pull out the dummy
HDD from the chassis along the guide rail.
Step 3 (Optional) Remove the baffle, if any, from the dummy HDD.
Baffle
Step 4 Use four screws to secure the HDD (with the PCB side downward) to the bracket. In order to
ensure the HDD pin holds the line with the rear of the plate, mount screws to the specific
screw hole as shown.
14
DS-AT1000S Series Storage System Quick Start Guide
Step 5 Insert the HDD bracket (with the PCB side towards the left of the chassis) to the chassis and
push it along the guide apparatus to the bottom. Then, press the securing handle to ensure
the bracket has been seated into position and lock it.
Step 6 Repeat the operating steps above till all HDDs have been installed.
15
DS-AT1000S Series Storage System Quick Start Guide
2.3 Startup
Follow the rules below to operate startup and shutdown:
Step 1 Connect all the power cords to the redundancy power supply module before applying
power.
Step 2 Press the power button on the device. It may take 5 to 10 minutes to finish the startup
process. After startup, storage system will send out beep sound.
16
DS-AT1000S Series Storage System Quick Start Guide
2.4 Shutdown
Step 1 Log in the storage system via Internet Explore. For details, refer to 3.1 Activate Storage
System.
Step 2 Go to Device > Device Overview.
17
DS-AT1000S Series Storage System Quick Start Guide
Chapter 3 Network
You are recommended to connect all the network interfaces to the Internet.
18
DS-AT1000S Series Storage System Quick Start Guide
Step 2 You can view binding network information and modify binding parameters.
19
DS-AT1000S Series Storage System Quick Start Guide
If you forget the IP address of data network interface, you can log in storage system via
management network interface to view the IP address. Default IP address of management
network interface is 10.254.254.254.
20
DS-AT1000S Series Storage System Quick Start Guide
The configuration process takes a certain time. The following prompt will pop up after
configuration finishes.
21
DS-AT1000S Series Storage System Quick Start Guide
22
DS-AT1000S Series Storage System Quick Start Guide
23
DS-AT1000S Series Storage System Quick Start Guide
2) Enter network camera information. The information must be the same with the
information of network camera to add.
3) Click OK.
Quick Add: Add network cameras of the same password and in the same network segment the
storage system.
1) Click Quick Add. Network cameras in the same network segment with the storage
system will be listed.
2) Check network cameras to add and click OK. Network cameras of the same password
with the storage system will be successfully added.
24
DS-AT1000S Series Storage System Quick Start Guide
5.4 Playback
Go to Playback. You can play back, search, download recorded videos.
25
UD14832N