Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Sikagrout - 214 Sa

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

PRODUCT DATA SHEET

SikaGrout®-214 SA
CEMENTITOUS, HIGH EARLY STRENGTH, NON-SHRINK PRECISION GROUT

DESCRIPTION CHARACTERISTICS / ADVANTAGES


SikaGrout®-214 SA is a cementitious, free flowing, eco- SikaGrout®-214 SA is an easy to use grout requiring
nomical, non-shrink precision grout with high early only the addition of water. It offers the following be-
and ultimate strength. neficial properties:
Suitable for use in hot and tropical climatic conditions. ▪ Easy to mix
▪ High early strength
USES ▪ Good flow characteristics
▪ Non-shrink
SikaGrout®-214 SA precision grout is used for grouting ▪ Adjustable consistency
in the following: ▪ High final strengths
▪ Machine Foundations ▪ Non-corrosive and iron-free
▪ Columns in pre-cast construction
▪ Base plates APPROVALS / CERTIFICATES
▪ Concrete anchors, cavities, gaps and recesses
▪ General concrete repairs Complies with CRD-C621-83-10.2 and ASTM C1107 as
▪ Joint nosing Type C
▪ Structural concrete repairs
▪ Bridge bearings

PRODUCT INFORMATION
Composition Portland cement, selected fillers and aggregates, special additives
Packaging 25 kg bag
Appearance / Colour Grey Powder
Shelf life 12 months minimum from date of production
Storage conditions Store in original unopened packaging in a cool and dry condition between 5
°C and 35 °C. Protect from direct sunlight, heat and moisture.
Maximum Grain Size Max. 4 mm

Product Data Sheet


SikaGrout®-214 SA
February 2018, Version 01.01
020201010010000251

1/3
TECHNICAL INFORMATION
Compressive Strength (25 °C) 1 Day 28 Days (ASTM C109)
w/p = 0.13 (3.25 ≥ 30 N/mm2 ≥ 65 N/mm2
L water / 25 kg)

Tensile Adhesion Strength ≥ 1.5 N/mm2 (BS 1881)

APPLICATION INFORMATION
Mixing Ratio Consistency Water per 25 kg bag water / powder ratio
Flowable 3.25 - 3.5 L 0.13 - 0.14

Fresh Mortar Density ~2.4 kg/l (25 °C)


Yield ~11.7 L / 25 kg bag, depending on water addition
Layer Thickness Min. 10 mm per pour.
Max. 100 mm per pour.
Ambient Air Temperature +5 °C min. / +35 °C max.
Substrate Temperature +5 °C min. / +35 °C max.
Pot Life ~2 h (23 °C)

APPLICATION INSTRUCTIONS APPLICATION

SUBSTRATE QUALITY / PRE-TREATMENT Before pouring let the mixed grout stand for approx-
imately 5 minutes after mixing to allow entrapped air
Concrete surfaces should be clean, rough, sound and to escape. Pour into the prepared area such that the
free from oil, grease, cement laitance and all loosely grout has the shortest distance to travel. Ensure that
adhering particles. air displaced by the grout is allowed to escape. When
Absorbent surfaces should be saturated thorougly with carrying out the base plate grouting, ensure a suffi-
clean water. Metal surfaces (iron and steel) should be cient head of pressure to keep the mortar flowing. All
free from scale, rust, oil and grease. exposed areas of the mortar surface should be kept as
small as possible.
BONDING AGENT AND STEEL PROTECTION
CURING TREATMENT
Embedded steel reinforcing should be free from scale, Treat exposed surfaces with Antisol-WB curing com-
rust, oil and grease, and treated with a suitable anti- pound or use other approved curing methods such as
corrosion coating such as SikaTop® Armatec®-110 Epo- polyethylene sheeting or wet hessian.
Cem®. Do not commence fogging until final set has been
The application of a suitable bonding agent, such as reached.
Sikadur®-32 LP or SikaTop® Armatec®-110 EpoCem®,
will improve adhesion on large areas or where particu- CLEANING OF EQUIPMENT
larly dense concrete substrates are involved.
Clean equipment and mixer immediately after applica-
MIXING tion with water. Hardened material can only be re-
moved mechanically.
Add water according to the desired consistency into a
clean mixing vessel before slowly adding the Sik-
aGrout®-214 SA powder. SikaGrout®-214 SA is best
mixed in a forced action mixer, for 2 to 3 minutes or
until the mix is free of lumps, not longer than 5
minutes. Slow speed drill (maximum 500 rpm) can be
also used for mixing. Normal tumble type concrete
mixers are not suitable. Do not mix more grout than
can be placed within 15 to 20 minutes. Do not add ex-
tra water or other ingredients. Mix only full bags for
the best result.

Product Data Sheet


SikaGrout®-214 SA
February 2018, Version 01.01
020201010010000251

2/3
IMPORTANT CONSIDERATIONS LEGAL NOTES
▪ Ensure formwork is secure and watertight to prevent The information, and, in particular, the recommenda-
movement and leaking during placing and curing. tions relating to the application and end-use of Sika
▪ Where maximum thickness exceeds 100 mm, con- products, are given in good faith based on Sika's cur-
sider the use of Sikacrete®-113 PP SA. rent knowledge and experience of the products when
▪ At high temperatures, use chilled water for mixing to properly stored, handled and applied under normal
keep grout temperature below 30 °C. conditions in accordance with Sika's recommenda-
▪ In hot weather, base plates and foundations must be tions. In practice, the differences in materials, sub-
shaded from direct sunlight. Condition bags < 30 °C strates and actual site conditions are such that no war-
prior to use. ranty in respect of merchantability or of fitness for a
▪ SikaRep SA thixotropic mortar can be used to fix particular purpose, nor any liability arising out of any
shims and alignment plates before grouting. legal relationship whatsoever, can be inferred either
▪ Depending on requirements and site condition, the from this information, or from any written recom-
addition of dry, single size, clean coarse aggregates is mendations, or from any other advice offered. The
possible up to 100 % by weight of the dry grout user of the product must test the product’s suitability
powder. Trials are recommended to confirm suitabil- for the intended application and purpose. Sika re-
ity of aggregates to be employed. serves the right to change the properties of its
▪ For additional information on SikaGrout®-214 SA or products. The proprietary rights of third parties must
other grouting materials contact Sika Technical De- be observed. All orders are accepted subject to our
partment. current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
BASIS OF PRODUCT DATA Sheet for the product concerned, copies of which will
be supplied on request.
All technical data stated in this Data Sheet are based
on laboratory tests. Actual measured data may vary
due to circumstances beyond our control.

LOCAL RESTRICTIONS
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
uses.

ECOLOGY, HEALTH AND SAFETY


For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
physical, ecological, toxicological and other safety-re-
lated data.

SIKA NORTHERN GULF SIKA SOUTHERN GULF SIKA SAUDI ARABIA


Bahrain / Qatar / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel: +966 11 217 6532
sika.gulf@bh.sika.com info@ae.sika.com info@sa.sika.com
gcc.sika.com gcc.sika.com gcc.sika.com

SikaGrout-214SA-en-AE-(02-2018)-1-1.pdf

Product Data Sheet


SikaGrout®-214 SA
February 2018, Version 01.01
020201010010000251

3/3

You might also like