PG279Q series

LCD Monitor

User Guide
 First Edition
September 2015

Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the
product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation nd to the
owners’ benefit, without intent to infringe.

ii
Contents

Notices.......................................................................................................... iv
Safety information........................................................................................ v
Care & Cleaning........................................................................................... vi
Takeback Services...................................................................................... vii
Chapter 1: Product introduction
1.1 Welcome! ..................................................................................... 1-1
1.2 Package contents.......................................................................... 1-1
1.3.1 Front view........................................................................ 1-2
1.3.2 Back view......................................................................... 1-3
1.3.3 GamePlus Function......................................................... 1-4
1.3.4 TURBO Function (only for DisplayPort input).................. 1-5
Chapter 2: Setup
2.1 Adjusting the monitor................................................................... 2-1
2.2 Detaching the arm (for VESA wall mount).................................. 2-2
2.3 Connecting the cables.................................................................. 2-2
2.4 Turning on the monitor................................................................. 2-3
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure........................................................... 3-1
3.1.2 OSD function introduction................................................ 3-1
3.2 Specifications summary . ............................................................ 3-6
3.3 Supported operating mode.......................................................... 3-8

iii
 Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.

As an Energy Star® Partner, our company has determined that this

product meets the Energy Star® guidelines for energy efficiency.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.

iv
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in fire
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
• The adapter is only used for this monitor, do not use it for other purpose.
Your device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP-90YD B / ADP-120RH B

This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.

AEEE yönetmeliğine uygundur

v
 Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

vi
Where to find more information
Refer to the following sources for additional information and for product and
software updates.

1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com

2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.

Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.

vii
viii
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!

1.2 Package contents

Check your package for the following items:
LCD monitor
Driver and Manual disc
Quick start guide
Warranty card
Power adapter
Power cord
DP cable
HDMI cable
USB cable

If any of the above items is damaged or missing, contact your retailer

immediately.

Select “ON” when you see the message “LIGHT IN MOTION ON/OFF” appears
if you want to turn on the red light on the base. Select “OFF” if you want it to
turn off. If you disable this function but later wish to reactivate it, please use
the OSD menu to turn it on. The monitor is Energy Star 6.0 compatible when
“LIGHT IN MOTION” is “OFF”.

If no signal is detected for 120 seconds, the monitor automatically enters saving
mode.

It is recommended that you set the DisplayPort Deep Sleep and HDMI Deep
Sleep functions to “OFF”.

ASUS PG279Q Series LCD Monitor 1-1

 1.3 Monitor introduction
1.3.1 Front view

1. ( 5-way) button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
2. button
• Exits the OSD menu item.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
3. button:
• GamePlus hotkey. Move the ( ) button up/down to select and
press ( ) to confirm the function needed.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
4. button
• TURBO hotkey. Press the button to select among different refresh rates.
(Only for DisplayPort input)
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.

1-2 Chapter 1: Product introduction

5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.

Status Description
White ON
Amber Standby mode/No signal
OFF OFF
Red G-SYNC
Yellow ULMB

1.3.2 Back view

9 4 5 6 7 8

Rear connectors
1. DC-IN port. This port connects the power cord.
2. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
3. DisplayPort. This port is for connection for a DisplayPort compatible device.
4. HDMI port. This port is for connection with an HDMI compatible device.
5. USB 3.0 upstream port. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
6. USB 3.0 downstream ports. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
7. For service personnel only.
8. Kensington lock slot.
9. Control buttons.

ASUS PG279Q Series LCD Monitor 1-3

 1.3.3 GamePlus Function
The GamePlus function provides a toolkit and creates a better gaming environment
for users when playing different types of games. In addition, Crosshair function is
specially designed for new gamers or beginners interested in First Person Shooter
(FPS) games.
To active GamePlus:

1. Press the GamePlus hotkey.

2. Move the ( ) button up/down to select among different functions.
3. Press the ( ) button or move the ( ) button right to confirm the
function you choose, and move the ( ) button up/down to navigate
through the settings. Move the ( ) button left to go back, off, and exit.
4. Highlight the desired setting and press the ( ) button to activate it.
Press the button to inactivate it.

GamePlus Main Menu GamePlus — Crosshair GamePlus — Timer

GamePlus GamePlus GamePlus



Crosshair 




Timer



FPS

FPS Counter

NEXT BACK/EXIT NEXT BACK/EXIT NEXT BACK/EXIT

1-4 Chapter 1: Product introduction

1.3.4 TURBO Function (only for DisplayPort input)
The TURBO function helps you select among different refresh rates in a convenient
way.
To active TURBO:
Press the TURBO hotkey repeatedly to select.

or
TURBO

TURBO TURBO TURBO

150 Hz
60 Hz 120 Hz 144 Hz or
TURBO

155 Hz
or
TURBO

160 Hz
or
TURBO

165 Hz

ASUS PG279Q Series LCD Monitor 1-5

1-6 Chapter 1: Product introduction
2.1 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +20˚ to -5˚ (for tilt)/+60˚ to -60˚ (for
swiveling/ +120 mm (for height adjustment)/90˚ (for portrait view).

-5° ~ +20°

120mm

60° 60°
0°

Figure 1 Figure 2 Figure 3

It is normal that the monitor slightly shakes while you adjust the viewing angle.

Pivoting the monitor

1. Lift the monitor to the highest position.

2 Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise to the angle you need.
-5° ~ +20°

0°

90°

It is normal that the monitor slightly shakes while you adjust the viewing angle.

ASUS PG279Q Series LCD Monitor 2-1

 2.2 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:

1. Have the front of the monitor face down on a table.

2. Loosen the four screws on the back of the monitor and remove the arm/base.

We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.

2.3 Connecting the cables

Connect the cables as the following instructions:

• To connect the power cord:

a. Connect the power adapter securely to the monitor’s DC input.

2-2 Chapter 2: Setup

 b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
• To connect the DisplayPort/HDMI cable:
a. Plug one end of the DisplayPort cable to the monitor’s DisplayPort/HDMI
port.
b. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort port.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
• To use the USB 3.0 ports: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8
operating system. That will enable the USB ports on the monitor to work.

2.4 Turning on the monitor

Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.

ASUS PG279Q Series LCD Monitor 2-3

2-4 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu

3.1.1 How to reconfigure

Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking On

GameVisual Max Refresh Rate

Blue Light Filter

Color

Image

Input Select

System Setup

MOVE/ENTER BACK EXIT

1. Press the ( ) button to activate the OSD menu.

2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the (
) left repeatedly until the OSD menu disappears. To adjust other functions,
repeat steps 1-3.
3.1.2 OSD function introduction
1. Over Clocking
This function allows you to adjust the refresh rate.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking On

GameVisual Max Refresh Rate

Blue Light Filter

Color

Image

Input Select

System Setup

MOVE/ENTER BACK EXIT

• Select “ON” if you want to enable this function.

ASUS PG279Q Series LCD Monitor 3-1

 • Max Refresh Rate: After activating this function, you can select one
refresh rate to be displayed along with 60 Hz and 120 Hz when pressing
the TURBO hotkey (Only for DisplayPort input).

After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA
Control Panel. If you don’t see an image, disconnect the DP cable and use the
monitor OSD to try again with a safer Max Refresh Rate.

2. GameVisual
This function contains 6 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking Scenery Mode

GameVisual Racing Mode

Blue Light Filter Cinema Mode

Color RTS/RPG Mode

Image FPS Mode

Input Select sRGB Mode

System Setup

MOVE/ENTER BACK EXIT

• Scenery Mode: This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
• Racing Mode: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
• Cinema Mode: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
• RTS/RPG Mode: This is the best choice for Real-Time Strategy (RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
• FPS Mode: This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics from
PCs.

3-2 Chapter 3: General Instructions

 • In the Racing mode, the following function(s) are not user-configurable:
Saturation.
• In the sRGB mode, the following function(s) are not user-configurable:
Saturation, Color Temp., Brightness, Contrast.

3. Blue Light Filter

In this function, you can adjust the blue light filter level.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking Level o

GameVisual Level 1

Blue Light Filter Level 2

Color Level 3

Image Level 4

Input Select

System Setup

MOVE/ENTER BACK EXIT

• Level 0: No change.
• Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
4. Color
You can adjust Brightness, Contrast, Saturation and Color temperature from
this menu.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking Brightness 80

GameVisual Contrast 50

Blue Light Filter Saturation 100

Color Color Temp.

Image

Input Select

System Setup

MOVE/ENTER BACK EXIT

• Brightness: the adjusting range is from 0 to 100.

• Contrast: the adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: contains 4 modes including Cool, Normal, Warm, and User
Mode.

ASUS PG279Q Series LCD Monitor 3-3

5. Image
You can adjust OD and ULMB from this menu.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking OD

GameVisual ULMB

Blue Light Filter

Color

Image

Input Select

System Setup

MOVE/ENTER BACK EXIT

• OD: Improves the gray level response time of the LCD panel.
• ULMB (Ultra Low Motion Blur) (only for DisplayPort input): Adjusts the
level of motion blur reduction. This function is available when the refresh
rate is 85Hz, 100Hz or 120Hz.
6. Input Select
In this function, you can select your desired input source.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking DisplayPort

GameVisual HDMI

Blue Light Filter

Color

Image

Input Select

System Setup

MOVE/ENTER BACK EXIT

7. System Setup
Allows you to adjust the system.
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279

Over Clocking Language

GameVisual OSD Position OK

Blue Light Filter Transparency

Color OSD Timeout

Image Key Lock

Input Select Information

System Setup LIGHT IN MOTION

Sound

All Reset

MOVE/ENTER BACK EXIT

• Language: There are 21 languages for your selection, including English,

French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.

3-4 Chapter 3: General Instructions

 • OSD Position: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
• Transparency: Adjusts the OSD background from opaque to transparent.
• OSD Timeout: Adjusts the OSD timeout from 10 to 120 seconds.
• Keylock: To disable all function keys. Press over 5 seconds to cancel
the key lock function.
• Information: Shows the monitor information.
• LIGHT IN MOTION: Select “ON” if you want to turn on the red light on the
base.
• Sound:
* Volume: the adjusting range is from 0 to 100.
* Mute: toggles the monitor sound between on and off.
• All Reset: “Yes” allows you to restore the default settings.
• DisplayPort Deep Sleep: puts the DisplayPort port into deep sleep.
• HDMI Deep Sleep: puts the HDMI port into deep sleep.

In order to be Energy Star compliant, the default setting for DisplayPort Deep
Sleep and HDMI Deep Sleep is “On”.
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button (except ) on the monitor to wake it up.
- Disable the Deep Sleep function. (Recommended)

ASUS PG279Q Series LCD Monitor 3-5

3.2 Specifications summary
Panel Type TFT LCD
Panel size 27”W (16:9, 68.47 cm) wide screen
Max. Resolution 2560 x 1440
Pixel pitch 0.233 mm
Brightness (Typ.) 350 cd/m2
Contrast Ratio (Typ.) 1000:1
Viewing angle(H/V) CR>10 178˚/178˚
Display colors 16.7 M
Response time 4 ms
Color temperature selection 4 color temperatures
Analog input No
Digital input DisplayPort v1.2 x 1, HDMI v1.4
Earphone jack Yes
Audio input No
Speaker (Built-in) 2 W x 2 Stereo, RMS
USB 3.0 port Upstream x 1, Downstream x 2
Colors Black
Power LED White (On)/Amber (Standby)
Tilt +20˚~ -5˚
Swivel +60˚~ -60˚
Height adjustment 120 mm
VESA wall mount 100 x 100 mm
Kensington lock Yes
Voltage rating AC: 100~240V
DC: 19V, 4.74A (AC adapter) or 19V, 6.32A (AC
adapter)
Power consumption Power On: < 120 W, Standby: < 0.5 W,
Power Off: < 0.5 W
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimensions (W x H x D) 619.7 mm x 432.5 mm x 237.9 mm (machine)
756 mm x 456 mm x 300 mm (package)
Weight (Esti.) 7.0 kg (Net); 10.6 kg (Gross)
Multi-languages 21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatian, Polish, Romanian, Hungarian,
Turkish, Simplified Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesia, Persian)
Accessories DP cable, HDMI cable, USB cable, power
adapter, power cord, Driver and Manual disc,
Quick start guide, warranty card

3-6 Chapter 3: General Instructions

Regulation approvals Energy Star®, CB, CE, CU, CCC, UL/cUL, FCC,
RCM, BSMI, VCCI, RoHS, WEEE, J-MOSS, ErP,
PSE, CEL Level 1, Windows 7 WHQL, Windows
8.1 WHQL, Windows 10 WHQL, KCC, E-Standby

*Specifications are subject to change without notice.

3.3 Troubleshooting (FAQ)
Problem Possible Solution

Power LED is not ON • Press the button to check if the monitor

is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights amber and there is • Check if the monitor and the computer are
no screen image in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image is not centered or sized • Adjust the H-Position or V-Position
properly settings via OSD.
Screen image bounces or a wave pattern is • Make sure the signal cable is properly
present in the image connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does • Inspect the signal cable and make sure
not look white) that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.

ASUS PG279Q Series LCD Monitor 3-7

3.4 Supported operating mode
HDMI input
Resolution Frequency Refresh Rate
640 x 480 60Hz
720 x 480 60Hz
720 x 576 50Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 720 50Hz
1280 x 720 60Hz
1920 x 1080 50Hz
1920 x 1080 60Hz
2560 x 1440 60Hz

Note:

Do not support interlace.

DisplayPort input
Resolution Frequency Refresh Rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
2560 x 1440 24Hz
2560 x 1440 60Hz
2560 x 1440 85Hz
2560 x 1440 100Hz
2560 x 1440 120Hz
2560 x 1440 144Hz

Note:

Do not support interlace.

G-SYNC (only for DisplayPort input) supported NVIDIA GPUs: GeForce GTX TITAN X, GeForce GTX
980 Ti, GeForce GTX 980, GeForce GTX 970, GeForce GTX 960, GeForce GTX TITAN Z, GeForce
GTX TITAN Black, GeForce GTX TITAN, GeForce GTX 780 Ti, GeForce GTX 780, GeForce GTX 770,
GeForce GTX 760, GeForce GTX 750 Ti, GeForce GTX 750, GeForce GTX 745 (OEM), GeForce GTX
690, GeForce GTX 680, GeForce GTX 670, GeForce GTX 660 Ti, GeForce GTX 660, GeForce GTX 650
Ti BOOST. For other GPUs, please contact the manufactures to see if they are compatible.

3-8 Chapter 3: General Instructions

DisplayPort input--Over clocking
Resolution Frequency Refresh Rate
2560 x 1440 144Hz
2560 x 1440 150Hz
2560 x 1440 155Hz
2560 x 1440 160Hz
2560 x 1440 165Hz

Note:

Do not support interlace.

Over Clocking supported GPUs: NVIDIA Maxwell GPU Graphics Card like GTX745, GTX750, GTX750
Ti, GTX 960, GTX970, GTX980, GTX980 Ti and GTX Titan X. For other GPUs, please contact the
manufactures to see if they are compatible.

The monitor is purposely supporting the NVIDIA G-SYNC technology and targeting NVIDIA graphics
solutions.

Please note that Over Clocking function/performance depends on the GPUs or contents displayed.
ASUS only provides this function. The performance or any side effect after activation is not
guaranteed.

ASUS PG279Q Series LCD Monitor 3-9