Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

DATA &

SPECIFICATIONS

4-Stroke Engines 3299N030


Technical Services Issue 3, 15 February 2022

Safety Spare Parts for


For your information
WÄRTSILÄ 32 engines
Distribution to operators and owners of installations Engines concerned
concerned WÄRTSILÄ® 32
Introduction
This recommended safety spare parts stock
specification is based on field experience.
The spare parts stock is the best insurance
for keeping the engine in operation and
should always be complete and in good
condition.
Validity / Issue
Until further notice. Replacing issue 2 dated
30 October 2015.
Before taking any action, always check the available
online systems for the latest revision of this document.
Any locally stored or printed version is considered to
be an uncontrolled document.

Wärtsilä Finland Oy Tel: +358 010 709 0000 www.wartsila.com


P.O. Box 244 (Järvikatu 2-4)
FIN-65101 Vaasa
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 2 / 9

Document history
Issue Date Description
- Table 4:
3 15-02-2022 o 145 042 Push rod - added
o Qty of push rods, added: “without VIC” / “with VIC”
- Table 8, 181001 “Lubricating oil pump” added
- Table 15, “UNIC 2nd generation specific parts” added
- Table 17, descriptions for part numbers “107 1161” and “107 1162” corrected

Introduction
The recommended safety spare parts stock specification is based on field experience.
The spare parts stock is the best insurance for keeping the engine in operation and
should always be complete and in good condition. Parts used for maintenance from the
safety spare parts stock should be replaced at once.
This specification does not cover auxiliary system spare parts. Ensure that in addition to
engine safety spare parts also installation specific auxiliary spare parts are available.
For marine installations the safety spare parts list fulfils the recommendations by the
International Association of Classification Societies (IACS).

Request for quotation and ordering


Contact your nearest Wärtsilä representative for a quotation and ordering, please specify
the engine serial number(s).
A detailed as-maintained engine number specific Safety Spare Parts (SSP) list can be
provided on request. The list includes recommended quantities.
Options when ordering:
• Attach the SSP quotation, if available.
• Specify the engine serial number(s), part numbers listed in the tables below and
quantities.

Safety spare parts example


Table 1, Cylinder block and cylinder liner

Part number Description Qty


912 003 Cylinder unit overhaul set (Parts included in the set are listed below) 1
100 003 Anti-polishing ring 1
100 023 O-ring for cylinder liner 2
100 113 O-ring for cylinder liner 1
107 009 O-ring 1
107 113 Hose gasket 1
111 016 Big end bearing kit 1
113 012 Piston ring set 1
120 015 Sealing set for cylinder head replacement 1
120 054 Sealing set for cylinder head overhaul 1
100 015 O-ring for main bearing screw 2
100 110 Cylinder liner 1
100 341 Thrust bearing kit (4 halves) 1
100 342 Main bearing kit (upper and lower half) 2
100 142 Sealing set for hydraulic jack 2
100 114 Screw for cylinder liner 1
100 343 Flywheel bearing kit (2 halves) 1

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 3 / 9


Table 2, Piston and connecting rod

Part number Description Qty


111 010 Connecting rod, lower part 1
111 011 Connecting rod, upper part 1
911 001 Set for connecting rod screws and shim (Parts included in the set are listed below) 1
111 004 Big end bearing screw 4
111 012 Connecting rod screw 4
111 015 Shim 1
113 001 Piston 1
113 009 Securing ring 2
113 010 Gudgeon pin 1

Table 3, Cylinder head with valves

Part number Description Qty


100 024 Cylinder head screw 2
120 001 Cylinder head complete 1
120 021 Seat ring for inlet valve 2
120 022 Seat ring for exhaust valve 4
121 001 Exhaust valve assembly 4
121 007 Inlet valve assembly 2
123 001 Starting valve complete 2
123 021 Sealing set for starting valve 2
217 048 Repair kit for main starting valve 1
217 046 Spare part set for main starting valve 1
357 017 Main starting valve 1
200 013 Multi-duct 1
200 028 Sealing ring for multi-duct 1
200 025 Gasket for multi-duct 1
200 392 O-ring for multi-duct 1

Table 4, Valve tappet with guide block

Engines Engines
without VIC with VIC

Part number Description Qty Qty


145 001 Push rod 2 1
145 042 Push rod - 1
145 002 Protecting pipe 2
145 018 Valve tappet with guide block 1
145 030 Spare part kit for valve tappet 1

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 4 / 9


Table 5, Camshaft

Part number Description Qty


100 005 Camshaft bearing bush 2
148 001 (CW rotating)
Camshaft piece 1
148 002 (CCW rotating)
148 013 Screw 12
148 023 Guiding pin 2
148 003 Snap ring 2
148 006 Screw 12
148 007 Nut 12

Table 6, Injection system

Part number Description Qty


165 001 Fuel injection pump complete 1
165 023 Pump element 1
165 080 Sealing set for injection pump 2
167 003 Connection piece 1
167 005 Injection valve 2
167 012 Fuel injection pipe (high pressure) 1
167 020 Nozzle 2
167 044 Sealing set for injection valve 1

Table 7, Fuel system

Part number Description Qty


350 126 Pipe for fuel injection pump 1
350 127 Bracket for fuel injection pump 1
350 134 O-ring for fuel pipe 8
470 200 Fuel filter cartridge 1)

470 241 Sealing set for fuel filter 1


161 001 Lifter for injection pump 1
161 021 Sealing set for fuel feed pump 1
174 110 Sealing set for feed pump 1
1)
Quantity dependant on filter type.

Table 8, Lubrication system

Part number Description Qty


181 001 Lubricating oil pump 1
181 038 Sealing set for lubricating oil pump 1
182 062 Sealing set for pre-lubricating pump 1
183 086 Set of lubricating oil thermostatic elements 1
471 063 Lubrication oil filter cartridge 1)

471 126 Sealing set for lubricating oil filter 2


471 125 Sealing set for lubricating oil filter, 6L 2
473 117 Sealing set for centrifugal filter GF600 1
473 081 Sealing set for centrifugal filter FM600 1
474 043 Sealing set for lubricating oil module 1
1) Quantity dependant on filter type.

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 5 / 9


Table 9, Cooling water system

Part number Description Qty


191 001 (HT water pump)
Cooling water pump 1
191 002 (LT water pump)
191 051 Sealing set for cooling water pump 1
196 264 Set of thermostatic elements 1

Table 10, Regulating system

Part number Description Qty


200 334 Positioner 1
207 990 Butterfly valve DN100 12)
207 984 Butterfly valve DN100 12)
207 991 Sealing set for butterfly valve DN100 12)
207 985 Sealing set for butterfly valve DN100 12)
207 992 Butterfly valve DN125 12)
207 986 Butterfly valve DN125 12)
207 993 Sealing set for butterfly valve DN125 12)
207 987 Sealing set for butterfly valve DN125 12)
207 990 Butterfly valve DN80 12)
207 901 Sealing set for butterfly valve DN80 12)
228 010 Overspeed trip device 1
224 084 Ball joint, linkbar 2
224 041 Ball joint, shaft for governor 1
224 037 Ball joint, shaft for governor 1
2) The size of the butterfly valve depends on the engine configuration.

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 6 / 9


Table 11, Charge air & exhaust gas system

Part number Description Qty


156 383 Spare part set for turbocharger 1
200 009 Screw for exhaust system 12
200 011 Nut for exhaust system 12
200 029 Gasket for exhaust system 2
200 006 Bellows for exhaust system 1
200 079 Bellows for exhaust manifold 1
200 081 Bellows for exhaust connection part to turbocharger 1
200 007 Bellows for exhaust connection part to turbocharger 1
200 084 Screw for exhaust connection part to turbocharger 18
200 085 Nut for exhaust connection part to turbocharger 18
202 339 Bellows for wastegate 1
202 252 Bellows for wastegate 1
202 009 Bellows for wastegate 1
202 290 Bellows for by-pass 1
476 001 Air cooler complete 1
476 009 Sealing set for charge air cooler 1
202 052 Gasket for wastegate bellows 2
202 148 Gasket for wastegate bellows 2
202 055 Gasket for wastegate bellows 2
202 057 Gasket for wastegate bellows 2
202 048 Gasket for butterfly valve 2
202 012 Gasket for butterfly valve 2
202 011 Gasket for butterfly valve 2
202 181 Gasket for butterfly valve 1
202 123 Screw for butterfly valve 8
202 020 Screw for butterfly valve 8
202 016 Screw for butterfly valve 8
202 057 Screw for butterfly valve 8
202 193 Screw for butterfly valve 8
202 207 Screw for butterfly valve 8
202 110 Screw for butterfly valve 8
202 208 Nut for butterfly valve 8
202 432 Nut for butterfly valve 8
202 135 Screw for wastegate bellows 8
202 358 Screw for wastegate bellows 4
202 015 Screw for wastegate bellows 4
202 365 Screw for wastegate bellows 8
202 262 Screw for wastegate bellows 8
202 136 Screw for wastegate bellows 8
202 187 Screw for wastegate bellows 4
202 053 Screw for wastegate bellows 8
202 013 Screw for wastegate bellows 16
202 373 Screw for wastegate bellows 4
202 014 Nut for wastegate bellows 16
202 149 Nut for wastegate bellows 8
202 056 Screw for by-pass bellows 8
202 138 Nut for by-pass bellows 8

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 7 / 9


Table 12, Speed measuring system, electrical & control system

Common / UNIC C1-parts W32


Part number Description Qty
SE518 Speed pick-up for the turbocharger 1
ST196P Speed pick-up for the engine 1
SE167 Speed pick-up for the governor (RM-module) 1
PT101 Pressure sensor 0-16 bar 1
PT201 Pressure sensor 0-10 bar 1
PT301 Pressure sensor 0-40 bar 1
PT401 Pressure sensor 0-6 bar 2
PT700 Pressure sensor, crankcase (PP-engines) 1
PS210 Pressure switch 1
TE101 Temperature sensor, PT100 2
TE201 Temperature sensor, PT100 2
TE511 Temperature sensor, exhaust gas TC-inlet 1
TE517 Temperature sensor, exhaust gas TC-outlet 1
TE5011A Temperature sensor, exhaust gas 2
TE601 Temperature sensor, charge air engine inlet 1
TE621 Temperature sensor, CAC inlet 1
TE700 Temperature sensor, main bearing 1
TE7011A Temperature sensor, liner 1
TE7016A Temperature sensor, big end bearing 1
507 267 Antenna, big end bearing 1
LS204 Oil level transducer, oil sump 1
LS103A Oil level transducer, fuel injection pipe 1
120 039 Temperature sensor set for exhaust seat ring 1
GS171 Limit switch, stop lever 1
220 395 Spare part kit for governor 1
GT165-2 Load indicator, position transmitter 1
CV153-1 Solenoid valve, stop 1
CV321 Solenoid valve, start 1
ST173 Speed pickup, proximity switch 1

Table 13, Speed measuring system, electrical & control system, continued

WECS 2000 specific parts


Part number Description Qty
516 037 Relay card, RM-11 1
516 036 ECU main unit 1
507 069 DCU distributed control unit 1
PSZ201 Pressure switch 1
PDT243 Pressure diff. Sensor 1
516 129 Converter DC/DC-converter 1

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 8 / 9


Table 14, Speed measuring system, electrical & control system, continued

UNIC C2 specific parts


Part number Description Qty
507 215 Electronic unit, IOM-10 module 1
516 387 Electronic unit, ESM-20 module 1
516 292 Main control module 1
516 495 Electronic unit PDM-20-24, 24VDC 1
516 500 Control panel 1

Table 15, Speed measuring system, electrical & control system, continued

UNIC 2nd generation specific parts


Part number Description Qty
507 2025
Electronic unit, IOM-20 module 1
516 1725
516 387 Electronic unit, ESM-21 module 1
516 292 Control module COM-10 1
507 1815 Electronic unit CCM-30 1

Table 16, Speed measuring system, electrical & control system, continued

UNIC C3 specific parts


Part number Description Qty
507 215 Electronic unit, IOM-10 module 1
516 387 Electronic unit, ESM-20 module 1
516 292 Main control module 1
516 741 Electronic unit PDM-20-110, 110VDC 1
516 500 Control panel 1
507 1565 Electronic unit, CCM-20 1

Table 17, Miscellaneous

Part number Description Qty


800 090 Sealing set for hydraulic tightening tool 1
107 1161 Sealing kit for end covers 1
107 1162 Sealing kit for crankcase, camshaft and cylinder head cover 1
387 001 –
Glue compounds 13)
387 035
516 268 Damper, connecting boxed 4
507 053 Pressure gauge valve 1
353 043 Converter I/P-type 1
501 223 Fuse 20A, PDM-module 2
3)
1 item / product.

Contact
For services, spare parts and/or tools, please contact your nearest Wärtsilä
representative or log in to Wärtsilä Online: www.wartsila.com/wartsila-online
If you do not have the contact details at hand, please follow the link:
www.wartsila.com/contact

© 2022 Wärtsilä Finland Oy – All rights reserved – Please read the complete disclaimer at the end of this document.
DATA & SPECIFICATIONS

3299N030, Issue 3, Page 9 / 9

© 2022 Wärtsilä Finland Oy – All rights reserved


No part of this publication may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying, recording,
taping or other information retrieval systems) without the prior written permission of the copyright holder. Wärtsilä Finland Oy makes no
representation, warranty (express or implied) in this publication and assumes no responsibility for the correctness, errors or omissions for
information contained herein. Information in this publication is subject to change without notice. Wärtsilä does not assume any liability for the
consequences of the owner’s/operator’s actions, inactions, and/or decisions made or based upon the information provided herein.
Unless otherwise expressly set forth, no recommendation contained in this document or any of its appendices is to be construed as provided
due to a defect of the product, but merely as an improvement of the product and/or the maintenance procedures relating thereto. Any actions
by the owner/operator as a result of the recommendations are not covered under any warranty provided by Wärtsilä and such actions will
thus be at the owners/operators own cost and expense.
NO LIABILITY WHETHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL, IS ASSUMED WITH RESPECT TO THE
© INFORMATION CONTAINED
2022 Wärtsilä Finland Oy – HEREIN.
All rights THIS PUBLICATION
reserved IS CONFIDENTIAL
– Please read AND INTENDED
the complete disclaimer FORofINFORMATION
at the end this document.PURPOSES
ONLY.

You might also like