LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS

SL NO. NAME OF SPECIFICATION IEC STANDARDS

Instrument Transformer- Part 2: Additional requirements for current

1 IEC 61869-2:2012
transformers
Instrument transformers - Part 3: Additional requirements for inductive IEC 61869-3:2011
voltage transformers
2
Instrument transformers - Part 5: Additional requirements for capacitor
voltage transformers IEC 61869-5:2011

High-voltage switchgear and controlgear - Part 1: Common specifications

3 IEC 62271-1:2017
for alternating current switchgear and controlgear
4 Insulated bushings for alternating voltages above 1000V IEC-60137:2017
5 Power Transformer-Part-1: General IEC-60076-1
6 Power Transformer-Part-2: Temperature rise IEC-60076-2
Power Transformer-Part-3:Insulation levels, dielectric tests and external
7 IEC-60076-3
clearances in air
Power Transformer-Part-4:Guide to the lightning impulse and switching
8 IEC-60076-4
impulse testing-Power transformer and reactors
9 Power transformers - Part-5:Ability to withstand short circuit IEC-60076-5
10 Power transformers -Part-8: Application guide IEC-60076-8
Power transformers -Part-10: Power transformers - Determination of
11 IEC-60076-10
sound levels
12 Dry Type Power Transmformers IEC-60726
Fluids for elecrotechnical applications unused mineral insulating oils for
13 IEC-60296
transformer and switchgear
Guide for the selection and dimensioning of high voltage insulators for
14 IEC-60815
polluted conditions
Specification for Low-voltage Switchgear and Controlgear - Part 1 :
15 IEC-60947-1
General Rules
Specification for Low-voltage Switchgear and Controlgear - Part 2 :
16 IEC-60947-2
Circuit Breakers
Specification for Low-voltage Switchgear and Controlgear - Part 3 :
17 Switches, Disconnectors, Switch Disconnectors and Fuse IEC-60947-3
Combination Units
Specification for Low-Voltage Switchgear and Controlgear - Part 4 :
18 Contractors and Motor-Starters - Section 1 : Electromechanical IEC-60947-4-1
Contactors and Motor Starters
Low-Voltage Switchgear and Controlgear - Specification - Part 5 : Control
19 Circuit Devices and Switching Elements - Section 1 : Electromechanical IEC 60947-5-1
Control Circuit Devices
Specification for Low-Voltage Switchgear and Controlgear Assemblies -
20 IEC-60439-1
Part 1 : General rules
Specification for Low-voltage Switchgear and Controlgear Assemblies -
21 IEC-60439-2
Part 2 : Power switchgear and controlgear assemblies

Consultant : SATCON Page 1 of 6

 LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS
Specification for Low-Voltage Switchgear and Controlgear Assemblies -
22 Part 3 : Distribution boards intended to be operated by ordinary persons IEC-60439-3
(DBO)
Specification for Low-Voltage Switchgear and Controlgear Assemblies -
23 Part 4 : Particular requirements for assemblies for construction sites IEC-60439-4
(ACS)
Specification for Low-Voltage Switchgear and Controlgear Assemblies -
24 IEC-60439-5
Part 5 : Assemblies for power distribution in public networks
Surge Arresters-Part-1: Non linear resistor type gapped surge arresters
25 IEC-60099-1
for a.c systems
Surge Arresters-Part-4:Metal Oxide Surge Arresters without gap for A.C
26 IEC-60099-4
systems
Surge Arresters-Part-6:Surge Arresters containing both series and
27 IEC-60099-6
parallel gapped structures-Rated 52 KV and less.
High-voltage swithgear and controlgear - Part 200: AC metal-enclosed
28 switchgear and controlgear for rated voltages above 1 kV and up to and IEC 62271-200
including 52 kV
High voltage switchgear and controlgear: Part-100: High voltage
29 IEC-62271-100
alternating current circuit breakers
High voltage switchgear and controlgear: Part-102: Alternating current
30 IEC-62271-102
disconnectors and earthing switches
Characteristics of indoor and outdoor post insulators for systems with
31 IEC-60273
nominal voltage greater that 1000V
32 Tap changers-Part-1: Performance requirements and test methods IEC-60214-1
33 Tap changers-Part-2: Application guide IEC-60214-2
34 Degrees of protection provided by enclosures (IP Code) IEC-60529
35 Luminaires:Part-1: General requirements and tests IEC-60598-1
Luminaires:Part-2: Particular requirements-Fixed general purpose
36 IEC-60598-2
luminaires
Luminaires:Part-2-3: Particular requirements-Luminaires for road and
37 IEC-60598-2-3
street lighting
Stationary lead-acid batteries - General requirements and methods of
38 IEC-60896-11
test. Part 11: Vented types
Specification for thermoplastic-insulated leas sheathed cables for electric
39 IEC-60228
supply

40 Specification for cables and flexible cords for electric power and lighting IEC-60227

41 Environmental testing – Part 2-1: Tests – Test A: Cold IEC-60068-2-1

42 Electrical relays IEC-60255
Electrical measuring instruments - X-t recorders - Part 1: Definitions and
43 IEC-61143-1
requirements
44 Electrical Relays: Part-13: Biased differential relays IEC-60255-13
Power cables with extruded insulation and their accessories for rated IEC-60502-1
45 voltages from 1KV(Um=1,2KV) up to 30KV (Um=3,6KV)-Part-1:Cables

Consultant : SATCON Page 2 of 6

 LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS
for rated voltages of 1KV and 3KV
Power cables with extruded insulation and their accessories for rated
voltages from 1KV(Um=1,2KV) up to 30KV (Um=3,6KV)-Part-2:Cables IEC-60502-2
46 for rated voltages from 6KV upto 30KV
Power cables with extruded insulation and their accessories for rated
voltages from 1KV(Um=1,2KV) up to 30KV (Um=3,6KV)-Part-4:Test
47 IEC-60502-4
requirements on accessories of cables with rated voltages from 6 KV
upto 30KV
48 Specification for reactors-General IEC-60076-4
Functional safety of electrical/electronic/ programmable electronic safety-
49 related systems –Part 2 - Requirements for Electrical - Electronic IEC-61508-2
programmable electronic safety-related systems

50 Cable tray systems and cable ladder systems for cable management IEC-61537
51 Specification for PLC wave traps IEC-60953
52 Programmable controllers –Part 1: General information IEC-61131-1
53 Programmable controllers - Part 2: Equipment requirements and tests IEC-61131-2
54 Programmable controllers -Part 3 : Programming languages IEC-61131-3
55 Programmable controllers -Part 4:User guidelines IEC-61131-4

56 Programmable controllers -Part 5:Communications IEC-61131-5

57 Programmable controllers -Part 7:Fuzzy control programming IEC-61131-7

Programmable controllers -Part 8:Guidelines for the application and
58 IEC-61131-8
implementation of programming languages
Industrial process control valves Part I : Control valve terminology and
59 IEC-60534-1
general considerations
Industrial process control valves Part 2-1 :Flow-capacity - Sizing
60 IEC-60534-2-1
equations for fluid flow under installed conditions
Industrial process control valves Part 2-3:Flow capacity – Test
61 IEC-60534-2-3
procedures
Industrial process control valves Part 2-4:Flow capacity Section Four -
62 IEC-60534-2-4
Inherent flow characteristics and range ability
Industrial process control valves Part 2-5:Flow capacity –Sizing
63 equations for fluid flow through multistage control valves with interstage IEC-60534-2-5
recovery
Industrial process control valves Part 3: Dimensions Section One - Face-
64 IEC-60534-3
to- face dimensions for flanged, two-way, globe-type control valves
Industrial process control valves Part 3-1: Dimensions-Face-to-face
dimensions for flanged, two-way, globe-type, straight pattern and centre-
IEC-60534-3-1
65 to-face dimensions for flanged, two-way, globe-type, angle pattern control
valves
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face
66 IEC-60534-3-2
dimensions for rotary control valves except butterfly valves
Industrial-process control valves - Part 3-3: Dimensions End-to-end
67 dimensions for buttweld, two-way, globe-type, straight pattern control IEC-60534-3-3
valves

Consultant : SATCON Page 3 of 6

 LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS

68 Industrial process control valves Part 4:Inspection and routine testing IEC-60534-4
69 Low-voltage fuses -Part 1:General requirements IEC-60629-1:2007
Low-voltage fuses -Part 2-1: Supplementary requirements for fuses for
70
use by authorized persons (fuses mainly for industrial application)- IEC-60629-2-1
Sections I to VI: Examples the types of standardized fuses
Part 2:Supplementary requirements for fuses for use by authorized
71 IEC-60629-2-2
persons(fuses mainly for industrial application)
Part 4-1: Supplementary requirements for fuse-links for the protection of
semiconductor devices –Sections I to III: Examples of types of IEC-60629-4-1
72 standardized fuse-links
Part 4: Supplementary requirements for fuse-links for the protection of
73 IEC-60629-4
semiconductor devices
74 Hard drawn aluminium wire for overhead line conductors IEC 60889
75 Round wire concentric laid overhead electrical conductors IEC 61089
High-voltage test techniques-Part-1: General Definitions and test
76 IEC-60060-1
requirements
77 High-voltage test techniques-Part-2: Measuring systems IEC-60060-2
High-voltage test techniques-Part-3: Definitions and requirements for on-
78 IEC-60060-3
site testing
Specification for alternating-current circuit-breakers - Part 6: Guide to the
testing of circuit-breakers with respect to the switching of cables on no- IEC- 62271-100
79
load
Tests on indoor and outdoor post insulators of ceramic material or glass
80 IEC-60168
for systems with nominal voltages greater than 1 000 V
Tests on oil-filled and gas-pressure cables and their accessories - Part 1:
Oil-filled, paper or polypropylene paper laminate insulated, metal-
81 IEC-60141-1
sheathed cables and accessories for alternating voltages up to and
including 500 kV
Aluminium-magnesium-silicon alloy wire for overhead line and
82 IEC-60104
conductors

83 Round wire concentric lay overhead electrical stranded conductors IEC-60189

Functional safety –Safety instrumented systems for the process industry

84 sector –Part 1:Framework, definitions, system, hardware and software IEC-60511-1
requirements
Functional safety –Safety instrumented systems for the process industry
85 IEC-61511-2
sector –Part 2: Guidelines for the application of IEC 61511-1
Functional safety –Safety instrumented systems for the process industry
86 sector –Part 3: Guidance for the determination of the required safety IEC-61511-3
integrity levels
Short-circuit currents in three-phase a.c. systems -Part 0: Calculation of
87 IEC-60909-0
currents

Short-circuit currents in three-phase a.c. systems -Part 1:Factors for the

88 IEC-60909-1
calculation of short-circuit currents according to IEC 60909-0

Consultant : SATCON Page 4 of 6

 LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS
Short-circuit currents in three-phase a.c. systems - Part 2: Data of
89 IEC-60909-2
electrical equipment for short-circuit current calculations
Short-circuit currents in three-phase a.c. systems –Part 3: Currents
90 during two separate simultaneous line-to-earth short circuits and partial IEC-60909-3
short-circuit currents flowing through earth
Short-circuit currents in three-phase a.c. systems –Part 4: Examples for
91 IEC-60909-4
the calculation of short-circuit currents
Optical fibres - Part 1-44: Measurement methods and test procedures-
92 IEC-60793-1-44
Cut-off wavelength
93 Design criteria of overhead transmission lines IEC-60826
Short circuit currents- Calculation of effects- Part-1: Definitions and
94 IEC-60865-1
calculation methods
Short circuit currents- Calculation of effects- Part-2: Examples of
95 IEC-60865-2
calculation
96 Thermocouples -Part 1 : EMF specifications and tolerances IEC-60584-1
97 Thermocouples -Part 2: Tolerances IEC 60584-1
Thermocouples -Part 3: Extension and compensating cables -
98 IEC-60584-3
Tolerances and identification system

99 Alternating current disconnectors and earthing switches IEC 62271-102

Electrical accessories –Circuit-breakers for overcurrent protectionfor
100 household and similar installations –Part 1: Circuit-breakers for a.c. IEC-60898-1
operation
Switches for household and similar fixed-electrical installations –
101 Part 1: General requirements IEC-60669-1

Low-voltage electrical installations – Part 1: Fundamental principles,

102 assessment of general characteristics, definitions IEC-60364-1

103 Voltage measurement by means of standard air gaps IEC-60052

Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages
up to 18/30 kV (with copper or aluminium conductors and excluding gas-
104 pressure and oil-filled cables) - Part 2: General and construction IEC-60055-2
requirements
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV
105 (with copper or aluminium conductors and excluding gas-pressure and IEC-60055-1
oil- filled cables) - Part 1: Tests on cables and their accessories
Amendment to IEC 60702-2 Ed.2: Mineral insulated cables and their
106 terminations with a rated voltage not exceeding 750 V - Part 2: IEC-60702-2
Terminations

107 Standard colours for insulation for low-frequency cables and wires IEC-60304
Electric cables – Calculation of the current rating – Part 3-1: Operating
108 conditions - Site reference conditions IEC-60287-3-1

Electric cables - Calculation of the current rating - Part 1-3: Current rating
equations (100 % load factor) and calculation of losses - Current sharing
109 between parallel single-core cables and calculation of circulating current IEC-60287-1-3
losses

Consultant : SATCON Page 5 of 6

 LIST OF IEC STANDARDS FOR PROJECTS IN ELECTRICAL POWER SYSTEMS
Electricity metering equipment - Particular requirements - Part 21:
110 IEC-62053-21
Static meters for AC active energy (classes 0,5, 1 and 2)
Artificial pollution tests on high-voltage ceramic and glass insulators
111 to be used on a.c. systems IEC-60507

112 Specification for capacitors for power systems IEC-60871

Basic and safety principles for man-machine interface, marking and

113 IEC-60073
identification –Coding principles for indicators and actuators
Insulation coordination for equipment within low-voltage systems –
114 Part 1: Principles, requirements and tests IEC-60664-1

Low-voltage electrical installations - Part 5-54: Selection and erection

115 of electrical equipment - Earthing arrangements and protective IEC-60364-5-54
conductors
Fire hazard testing - part 11-20: test flames - 500 w flame test
116 method IEC 60695-11-20

Specifications for the re-use of sulphur hexafluoride (SF6) and its

IEC-60480
117 mixtures in electrical equipment

Conduits for electrical installations – Specification Part 1:

118 IEC-61386-1
General requirements
Specification for conduits for electrical installations. Part 2: Particular
IEC-61386-1
119 specifications for conduits. Section One: Metal conduits

Conduit systems for cable management - Part 21: Particular

120 IEC- 61386-21
requirements - Rigid conduit systems
120 Insulation co-ordination – Part 1: Definitions, principals and rules IEC-60071-1
121 Insulation co-ordination – Part 2: Application guide IEC-60071-2

Consultant : SATCON Page 6 of 6