Aquasoft CI - MSDS

Material Safety Data Sheet Revision Date: Oct/2014
PRODUCT: Aqua Soft CI Page 1 of 3
1. PRODUCT AND COMPANY IDENTIFICATION:

Product Name: Aqua Soft CI
Supplier: IFFCO Chemicals FZE
Hamriyah Free Zone Sharjah, UAE.
Emergency Telephone Number: +9716 5263922
Fax No: +9716 5263923
2. HAZARD IDENTIFICATION:
Statements of hazard
In compliance with EEC norm 155/91
Xi
Irritant
Risk of serious damage to eyes, Avoid contact with eyes
3. COMPOSITION AND INFORMATION ON INGREDIENTS:
Chemical Nature: Fatty acid amide derivative.

This preparation contains more than 20% fatty acid amide classified as IRRITANT (R41) by the
requirements of 67/548/EEC as amended by 92/32/EEC.
4. FIRST AID MEASURES:
Inhalation: Move person to fresh air. Give CPR if not breathing. Get immediate medical
attention.
Skin Contact: Wash skin with plenty of water for 15 minutes. Remove contaminated clothing
and shoes. Get immediate medical attention.
Eye Contact: Immediately flush eyes thoroughly with water for several minutes. Remove
contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects
occur, consult a physician, preferably an ophthalmologist a Keep eyes wide open while rinsing. Get
immediate medical attention.
Ingestion: If swallowed, seek medical attention .Do not induce vomiting, unless directed to
do so by medical attention.
5. FIRE FIGHTING MEASURES:
Extinguishing media: Carbon dioxide, water fog, foam and dry chemical
Protective equipment for fire fighters: Wear self contained breathing apparatus.
Specific Methods: Standard procedure for chemical fires. Cool containers/tanks with water spray.
6. ACCIDENTAL RELEASE MEASURES:
Steps to be Taken if Material is Released or Spilled: Recover spilled material if possible. If unable to
recover, then proceed with appropriate cleanup methods. Absorb with materials such as: Clay. Sand.
Sawdust. Vermiculite. Collect in suitable and properly labeled containers. Water may be used for final
cleaning of affected area. Wash water should be disposed of in accordance with local regulations.
Plot No.1D-03, 04, P.O.Box 41671, Hamriyah Free Zone, Sharjah, UAE. Tel No: +971 6 5263922, Fax No: +971 6 5263923
www.iffco.com

Personal Precautions: Use appropriate safety equipment. For additional information, refer to Section 8,
Exposure Controls and Personal Protection.
Environmental Precautions: Prevent from entering into soil, ditches, sewers, waterways and/or
groundwater. See section 12 Ecological information.
7. HANDLING AND STORAGE:
Handling:
Advice on safe handling
Product may contain hazardous volatile ingredients which could accumulate in the
un vented headspace of Bags or containers. Do not breathe vapor.
Material Storage:
To maintain product quality, do not store in heat or direct sunlight. This product must be protected from
freezing and exposure to temperature exceeding 25°C .Store at room temperature. Product may change
color upon long-term storage.
Storage Class: VCI Storage Class 10
8. EXPOSURE CONTROLS / PERSONAL PROTECTION:
Exposure Limits
None established
Personal Protection
Eye /Face Protection: Use safety goggles. Safety goggles should be consistent with directive 89/686/EEC
category 2.
Skin Protection: Wear clean, long-sleeved, body-covering clothing.
Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment.
Protective Gloves: Use gloves chemically resistant to this material. Examples of preferred gloves barrier
material include: Chlorinated polyethylene. Polyethylene. Ethyl vinyl alcohol (PVA).polyvinyl chloride
(PVC) or other plastic material gloves.
Eye /Face Protection: Use safety goggles. Safety goggles should be consistent with directive 89/686/EEC
category 2.
Other Protective Equipment: Chemical resistant apron, protective suit, safety shoes.
Work Hygienic Practices: Wash thoroughly after handling. Launder contaminated clothing before reuse
Engineering Controls
Ventilation: Good general ventilation should be sufficient for most conditions Local mechanical
exhaust ventilation may be necessary for some operations.
9. PHYSICAL AND CHEMICAL PROPERTIES:
Appearance: Off White Flakes.

Solubility in water: Miscible (20°C)
10. STABILITY AND REACTIVITY:
Stable in normal conditions
11. TOXICOLOGICAL INFORMATION:

Skin: Irritant to mucous membrane.
Eyes: Risk of serious damage to eyes.
www.iffco.com

Inhalation: Not a relevant exposure route in normal use.
Ingestion: No data. By comparison with similar materials this product is not regarded as harmful.
12. ECOLOGICAL INFORMATION:

The following ecological data is estimated on the basis of the raw materials contained in the product and/or
of structurally comparable substances.
Persistence and Degradability: Contains surfactants which are 90% biodegradable by reference
to the German regulations of June 4th 1986. The total of organic components contained in the product
achieves a removal of DOC of 70% in 7 day Zahn – Wellens test.
Aquatic Toxicity: Acute Fish Toxicity: LC50 > 10 – 100 mg product / l
Acute Bacteria Toxicity: EC50 > 100 mg product /l
13. DISPOSAL CONSIDERATION:

Consult appropriate Federal, State, and Local regulatory agencies for proper disposal information.
Keep out of sewers, storm drains, surface waters and soil.
14. TRANSPORT INFORMATION:

No special packaging requirements
Not classified as dangerous goods under the United Nations Transport Recommendations
15. REGULATORY INFORMATION:

Symbol:
Xi
Classified as IRRITANT according to the rules of the EEC preparations Directive
88/379/EEC
Risk phrases: R41 : Risk of serious damage to the eyes.
Safety phrases: S25 : Avoid contact with the eyes
S39 : Wear eye/face protection
S26 : Incase of contact with eyes, rinse immediately with water
and seek medical advice.
DISCLAIMER
“The information, and in particular, the recommendations relating to the application and use of IFFCO products, are
given in good faith based on IFFCO current knowledge and experience of the products when properly stored, handled
and used under normal conditions, within their shelf life. In practice, the differences in materials, chemistries and actual
site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability
arising out of any legal relationship whatsoever, can be inferred either from this information, or from any
recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders
are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the
Product Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed in the
Internet under www.iffco.com.”
www.iffco.com

Aquasoft CI - MSDS

Uploaded by

Copyright:

Available Formats

Aquasoft CI - MSDS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aquasoft CI - MSDS

Uploaded by

Copyright:

Available Formats

Material Safety Data Sheet Revision Date: Oct/2014

PRODUCT: Aqua Soft CI Page 1 of 3

1. PRODUCT AND COMPANY IDENTIFICATION:

3. COMPOSITION AND INFORMATION ON INGREDIENTS:

Chemical Nature: Fatty acid amide derivative.

4. FIRST AID MEASURES:

5. FIRE FIGHTING MEASURES:

6. ACCIDENTAL RELEASE MEASURES:

PRODUCT: Aqua Soft CI Page 2 of 3

7. HANDLING AND STORAGE:

8. EXPOSURE CONTROLS / PERSONAL PROTECTION:

9. PHYSICAL AND CHEMICAL PROPERTIES:

Appearance: Off White Flakes.

10. STABILITY AND REACTIVITY:

Stable in normal conditions

11. TOXICOLOGICAL INFORMATION:

PRODUCT: Aqua Soft CI Page 3 of 3

12. ECOLOGICAL INFORMATION:

13. DISPOSAL CONSIDERATION:

14. TRANSPORT INFORMATION:

15. REGULATORY INFORMATION:

You might also like