Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Sds Multiclean Ghs

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

SAFETY DATA SHEET

1. IDENTIFICATION

Product identifier

MULTICLEAN
Recommended use of the chemical and restrictions on use
General purpose detergent.

Details of the supplier of the safety data sheet

Lab 6 Pty Ltd


Unit 17B 1 Endeavour Road
CARINGBAH NSW 2229
Telephone + 61 2 9525 6322
Facsimile + 61 2 9540 2616

Emergency telephone number


13 11 26 Poisons Information Centre

2. HAZARDS IDENTIFICATION

Classification of the substance or mixture


Classified as hazardous according to Safe Work Australia criteria.

Skin irritation – category 2


Eye irritation – category 2A

Label elements

Hazard pictogram

Signal Word
Warning

Hazard Statements
H315 Causes skin irritation
H319 Causes serious eye irritation

Precautionary Statements

General
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.

1/8
SAFETY DATA SHEET

Prevention
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves and eye/ face protection.

Response
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P321 Specific treatment (see supplemental first aid instructions on this label).

Other hazards
None known

3. COMPOSITION / INFORMATION ON INGREDIENTS

Mixtures

Ingredients CAS number Weight %t

Alcohols, C12-14, ethoxylated; Laureth-8 68439-50-9 <5%


Alcohols, C10-16, ethoxylated, sulfates, sodium salts; Sodium laureth sulphate 68585-34-2 <3%
Benzenesulfonic acid, dodecyl-, sodium salt; Sodium dodecyl benzene sulphonate 25155-30-0 <3%

4. FIRST AID MEASURES

Description of first aid measures


For advice, contact a Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766) or a doctor (at once).

Inhalation
If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.

Skin contact
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.

Eye contact
If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons
Information Centre or a doctor, or for at least 15 minutes.

Ingestion
If swallowed, do NOT induce vomiting.

Most important symptoms and effects, both acute and delayed


Causes skin irritation. Causes serious eye irritation.

Indication of any immediate medical attention and special treatment needed


Treat symptomatically.

2/8
SAFETY DATA SHEET

5. FIRE FIGHTING MEASURES

Extinguishing media
Not combustible. If material is involved in a fire use: fine water spray, normal foam, dry agent (carbon dioxide, dry chemical powder).

Special hazards arising from the substance or mixture


Not combustible. Decomposes on heating emitting toxic fumes.

Advice for firefighters


Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to products of
decomposition. Keep containers cool with water spray.

Hazchem Code
None allocated

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures


Wear protective equipment to prevent skin and eye contact and breathing in vapours. Shut off all possible sources of ignition. Work
up wind or increase ventilation. Clear area of all unprotected personnel. Contact local emergency services where appropriate.

Environmental precautions
Avoid contaminating waterways. If contamination of sewers or waterways has occurred advise local emergency services.

Methods and material for containment and cleaning up


Contain using sand or soil. Prevent run off into drains or waterways. Use absorbent (soil, sand or other inert material). Collect and
seal in properly labelled containers or drums for disposal.

Reference to other sections


See Section 8 for appropriate personal protective equipment. See Section 13 for waste treatment methods.

7. HANDLING AND STORAGE

Precautions for safe handling


Keep out of reach of children. Avoid skin and eye contact and breathing in vapour. Always wash hands before smoking, eating,
drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use.

Conditions for safe storage, including any incompatibilities


Store in a cool, dry, well ventilated place out of direct sunlight. Store away from sources of heat or ignition. Store away from
foodstuffs. Store away from incompatible materials described in Section 10. Keep container standing upright. Keep containers closed
when not in use. Check regularly for leaks.

Specific end uses


See Section 1.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters
No exposure standard assigned for this specific material by the Safe Work Australia.

3/8
SAFETY DATA SHEET

Exposure controls

Appropriate engineering controls


Natural ventilation should be adequate under normal use conditions. Keep containers closed when not in use.

Individual protection measures, such as personal protective equipment


The selection of PPE is dependent on a detailed risk assessment. The risk assessment should consider the work situation, the physical
form of the chemical, the handling methods, and environmental factors.

Eye/face protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts. Refer to Australian/New Zealand Standard AS/NZS 1337:1992 for guidance on
selection and use of protective eyewear.

Skin protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. Refer to Australian/New Zealand Standard AS/NZS 2161.1: 2000 for guidance
on selection and use of protective gloves. Personal protective equipment for the body, appropriate footwear and any additional skin
protection should be selected based on the task being performed and the risks involved and should be approved by a specialist before
handling this product.

Respiratory protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator. Refer to Australian/New Zealand Standard AS/NZS 1715 and AS/NZS 1716 for guidance on
selection and use of respiratory devices.

General safety and hygiene measures


Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the
end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Environmental exposure controls


Not available

9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties


Appearance Pink opaque liquid.
Odour Floral fragrance
Odour threshold Not available
pH 10.0 – 11.0
Melting point/freezing point Not available
Initial boiling point and boiling range Not available
Flash point Not available
Evaporation rate Not available
Flammability (solid, gas) Not available
Upper/lower flammability or explosive limits Not available
Vapour pressure Not available
Vapour density Not available
Relative density 1.03
Solubility Soluble in water
Partition coefficient: n-octanol/water Not available
Auto-ignition temperature Not available

4/8
SAFETY DATA SHEET

Decomposition temperature Not available


Viscosity Not data available
Explosive properties Not applicable
Oxidising properties Not applicable

Other information
No additional information

10. STABILITY AND REACTIVITY

Reactivity
No hazardous reactions under normal storage and use conditions.

Chemical stability
Stable under normal storage and use conditions.

Possibility of hazardous reactions


No hazardous reactions known under normal storage and use conditions.

Conditions to avoid
Avoid contact with foodstuffs. Avoid exposure to heat, sources of ignition, and open flame. Avoid contact with other chemicals.

Incompatible materials
None known.

Hazardous decomposition products


None known under normal storage and use conditions.

11. TOXICOLOGICAL INFORMATION

Information on toxicological effects

Acute toxicity: No data available for the mixture

Ingredient Oral Toxicity Dermal Toxicity Inhalation Toxicity


(LD50) (LD50) (LC50)
Alcohols, C12-14, ethoxylated 1564 mg/kg (rat) >3000 mg/kg (rabbit) >1600 mg/kg (rat)
Alcohols, C10-16, ethoxylated, sulfates, sodium salts 1,600 mg/kg (rat)
Benzenesulfonic acid, dodecyl-, sodium salt; Sodium 1080 mg/kg (rat)
dodecyl benzene sulphonate

Skin corrosion/irritation: Causes skin irritation.

Serious eye damage/irritation: Causes serious eye irritation

Respiratory or skin sensitisation: No data available

Germ cell mutagenicity: No data available

Carcinogenicity: No data available

Reproductive toxicity: No data available

5/8
SAFETY DATA SHEET

Summary of evaluation of the CMR properties: No data available

Specific Target Organ Toxicity (STOT)-single exposure: No data available

Specific Target Organ Toxicity (STOT)-repeated exposure: No data available

Aspiration hazard: No data available

Information on likely routes of exposure

Inhalation:
Breathing in mists may produce respiratory irritation.

Skin contact:
Contact with the skin may result in irritation. Will have a degreasing action on the skin. Repeated or prolonged skin contact may lead
to irritant contact dermatitis.

Eye contact:
An eye irritant.

Ingestion:
Swallowing can result in nausea, vomiting, diarrhoea, abdominal pain.

Symptoms related to the physical, chemical and toxicological characteristics


May cause redness and tearing of the eyes and skin redness.

Delayed and immediate effects as well as chronic effects from short and long term exposure
No information available.

Numerical measures of toxicity


Acute oral toxicity estimate (ATE) > 5000 mg/kg

Interactive effects
No information available.

Other information

12. ECOLOGICAL INFORMATION

Toxicity
Avoid contaminating waterways.

Persistence and degradability


No data available.

Bioaccumulative potential
No data available

Mobility in soil
No data available

6/8
SAFETY DATA SHEET

Other adverse effects


No data available

13. DISPOSAL CONSIDERATIONS

Waste treatment methods


Waste must be disposed of in accordance with federal, state and local environmental control regulations. The generation of waste
should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be
considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken
when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product
residues. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.

14. TRANSPORT INFORMATION

Not classified as a Dangerous Good by the criteria of the Australian Code for the Transport of Dangerous Goods by Road and Rail.

UN Number
Not applicable

UN Proper shipping name


Not applicable

Transport hazard class(es):


Not applicable

Packing group
Not applicable

Environmental hazards:
Not applicable

Special precautions for user


Not applicable

Transport in bulk according to Annex II of MARPOL and the IBC Code


Not applicable.

Other relevant information:


Hazchem Code
None allocated

15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture

Classification
Globally Harmonised System of Classification and Labelling of Chemicals (GHS) as published by Safework Australia.

Poison schedule
A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform Scheduling of
Medicines and Poisons (SUSMP).

7/8
SAFETY DATA SHEET

Inventory listing(s)
AICS (Australian Inventory of Chemical Substances): All components are listed on AICS, or are exempt

Chemical safety assessment


No chemical safety assessment has been carried out for this substance / mixture by the supplier

16. OTHER INFORMATION

Date of preparation Oct 2016

Abbreviations and Acronyms


ADG - Australian Code for the Transport of Dangerous Goods by Road and Rail (7th edition)
AICS - Australian Inventory of Chemical Substances
ATE - Acute Toxicity Estimate
CAS - Chemical Abstracts Service Registry Number
GHS - Globally Harmonized System of Classification and Labelling of Chemicals
IBC - Intermediate Bulk Container
IATA – International Air Transport Association
ICAO – Technical Instructions for the Safe Transport of Dangerous Goods by Air
IMDG – International Maritime Dangerous Goods
IMO – International Maritime Organisation
LC50 - Lethal Concentration, 50% / Median Lethal Concentration
MARPOL 73/78 - International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978.
("Marpol" = marine pollution)
LD50 - Lethal Dose, 50% / Median Lethal dose
PBT - Persistent, Bioaccumulative and Toxic
STOT-RE - Specific target organ toxicity (repeated exposure)
STOT-SE - Specific target organ toxicity (single exposure)
SUSMP - Standard for the Uniform Scheduling of Medicines & Poisons
UN - United Nations
vPvB - very Persistent and very Bioaccumulative

Key literature references and sources of data

This Safety Data Sheet summarises to our best knowledge at the date of issue, the chemical health and safety hazards of the product
and general guidance on how to safely handle the product in the workplace. Since Lab 6 Pty. Ltd. cannot anticipate or control the
conditions under which this product may be used, each user must, prior to usage, review this Safety Data Sheet in the context of how
the user intends to handle and use the product in the workplace.

If clarification or further information is needed to ensure that an appropriate assessment can be made, the user should contact this
company.

Our responsibility for the product as sold is subject to the terms and conditions of sale, a copy of which is sent to our customers and
is also available upon request.

End of Safety Data Sheet

8/8

You might also like