IT24F

lntegrated
Toolcarrier
 lT24t I nteg rated Too I ca rri er
A new class of machine that brings more versatility, pow er,
perTormance and operator comfort to your job.

0perator Station High Performance Power Train 0uick Goupler and Attachments
Ergonomically designed for total The Caterpillar 31 14T turbocharged The IT24F is a machine with
machine control in a comfortable, diesel engine, full-match torque applications limited only by your
spacious environment. Al1 controls, converter, countershaft power shift imagination. Choose from hundreds of
levers, switches and gauges are transmission and heavy duty axles form available attachments, most of which
positioned to max imize productivity. a responsive, reliable and fuel efficient can be changed in less than 30 seconds.
J/ Pilot hydraulic controls provide low- power train with more useable rimpull. pg.I
effort, quiet operation. y' Environmental package lowers exhaust
J/ Bonded glass windshield with silicon emis sions below worldwide re gulatory
j oints enhance visibility . directives.
J/ Ground-level door release fo, added J/ A new turbocharger improves engine
convenience. pg. 4-5 response and reduces smoke.
y' New Low-Speed transmission option fo,
higher engine speed at low travel speed.
pg. 6-7

State OTThe Art TechnologY

More useful loading,lifting and moving
power is made possible by o careful balance
of Caterpillar powertrain and hydraulic
$) stem components . Optimum machine
balance gives higher tipping loads without
additional pow er-robbing c ounterw ei ght .
M odern O perator's E nvironment
This new F-Series Cab provides enhanced
visibility, ergonomic controls, new pilot
hydraulic controls and offers a wide range
adjustment to fft any operator.
Versatile Inte grate d Toolcarrier D e sign
Le gendary Caterpillar eight-bar parallel lift
linkage and integral quick coupler give the
IT24F unmatched versatility for a range of
applications limited only by the
imagination.

y' New feature

 Frame Structure
All structural components of the IT24F
are integrated to form a stable, well-
balanced system for a wide variety of
J/ applications . New cushioned steering
stops prevent metal-to-metal impact at
full machine artriculationpg. I

s
0perator Station
Ergonomic design emphasizes comfort, visibility and easy operation.

0perator Gomfort. The F-Series cab

combines Caterpillar' s advanced
human dynamics engineering with
operators' most requested features.
The result is a spacious work
environment that promotes
productive operation. Exceptional
sound insulation and use of low-noise
components make the CatITz4F cab
one of the quietest in its class.

The cab door swings 180" and locks

open. A new door-release latch
Visibility. More glass and fewer Clear silicon seals and bonded glass
simplifies unlocking and closing the
obstructions are the key to the on the windshield help maximize
door from ground level without
IT24F' s excellent all-around forward visibility. New, longer wiper
remounting the machine.
visibility. The height of the cab and arms provide clear visibility in
Operators can customize the cab to location of the operator station were adverse conditions.
their individual needs through the carefully matched to provide
vast range of adjustments. The optimum upward visibility for more
operator seat, steering column and positive operation at maximum dump
climate controls are a few of the height. Loading high sided trucks and
many areas of adjustments that help hoppers is easier.
make theIT24F a leader in oPerator
preference.

4
 Easy Operation. New pilot hydraulic
controls give the IT24F
uncompromised ease of operation and
precision. Effort required to move the
levers is low enough to help prevent
fatigue, but tight enough to provide
optimum "feel" and modulation.
Load sensing steering allows full-time
positive control of steering without
robbing hydraulic power from lift
cylinders.

More Seating Options. There is a

wide choice of seat options. The Cat
Contour Series Seat, right, is the
premier seat option and is designed
for maximum comfort and fully-
adjustable support. Ergonomically
shaped seat cushions reduce pressure
on the lower back and thighs, while
allowing unrestricted arm and leg
movement. Even the arm rest angle is
adjustable.
High Performance Power Train
fhà mgh Performance Cat@ power trai provides better response, more useable
rimpull and lower exhaust emissions.

I - Gaterpillar 3114T Engine. The

IT24F operates at full-rated net
Unit Fuel lnjector power of 18.3 kW (105 hp). The
31 14T turbocharged diesel engine
Tu rbocha rger delivers long power strokes and high
torque rise. Improved turbocharger
technology provides more response
Silicon Aluminum and reduces visible smoke emissions.
Alloy Pistons Exhaust emissions have been reduced
and are much lower than worldwide
emission standards including the EEC
Forged Steel 88171 Directives. Special balancers
Cra n ksh aft
make the 3II4T one of the smoothest
runnin g 4-cylinder engines available.
Low-Mounted High pressure, unit-injection fuel
Oil Pump system with individual unit injectors
provide exceptional fuel economy
and low emissions. Deep oil Pan and
low-mount pump allows operation on
slopes to 35 degrees.

2- Caterpillar Full Match Torque

Gonvertet provides the most efficient
application of engine power for
maximum rimpull and responsive
implement hydraulics. Maximizes
both fuel efficiency and performance.

3 - Cat Power Shift Transmission.

Built rugged for highly reliable
service in tough applications. The Cat
Powershift Transmission is an
electric ally -controlled countershaft
transmission providing four forward
and three reverse speed ranges.
Direction and travel speed can be
changed on-the-go. Standard
Autoshift controls transmission
shifting at optimum ground sPeeds
for easier operation and maximum
machine performance. A new Low
Speed Transmission option uses a
different gear ratio for lower gears to
provide slower travel speed with
higher engine speed. The result is
better match with attachments that
demand high hydraulic flow.
4 - Gaterpillar Axle and Brakes. 5 - Differentials. Choose from
Enclosed design allows extended standard, NoSPIN or Limited Slip
operation even in the harshest differentials to adapt to a wide range
environments. Oil-disc brakes are of operating conditions. Limited Slip
adjustment-free and fully enclosed. differentials are available on front,
Patented Duo-Cone Seals keep oil in rear or both axles. NoSPIN
and lock contaminants out. differentials are available on the rear
Oscillating rear axle ensures four- axle only.
wheel ground contact for optimum
traction and stability. A new remote
grease fitting simplifies lubrication
of the rear axle trunion.

Pate nted
Duo-Cone Seal

Oil-Disc B ra kes

Differentia I

Full-Floating Bronze
Sleeve Bearings

7
0uick Goupler and Attachments
For applications limited only by your imagination.

The 0uick Coupler is an integral part

of the Caterpillar Integrated
Toolcarrier. Tool changes are quick
and easy without leaving the cab,
most under 30 seconds. A lever in the
operator compartment activates a
hydraulic cylinder for positive tool
retention or disengagement. Optional
3rd function and 4th function valves
have quick disconnect fittings.

8-Bar Parallel Design linkage

simplifies keeping forks level
throughout the range of lift, without
adjustment. Longer lift arms, taller
front tower and higher Pivot Point
offer more lift height and reach than
conventional loaders. Superior load
control is provided by more tilt
capacity than lift in almost all
positions. Wider lift arm sPacing
enhances visibility to working
implements.

Over two hundred tools are available

from Caterpillar Special Attachments
Division and many third-PattY
manufacturers.
Frame Structure
Balancedfor optimum strength and stability.

System balance. All structural 1 Heavy-plate rear frame provides 3. Forty degree center-point articulation
components of the lT24F are integrated rigidity, strength and weight where allows cycling in tight quarters.
to form a stable, well-balanced system needed.
4. Full four-plate loader tower provides
for wide variety of applications.
a
2 Spread-hitch design provides rigid lift arm mounting and protects
Frame, linkage and lift arms all work
strength in the articulation area, hydraulic cylinders and lines from
together.
reduces stress on the hitch pins and damage.
bearings.
Engine
Caterpillar four-stroke cycle, four cylinder 3114 turbocharged diesel engine.

Ratings at 2400 RPM Power rating conditions Features

kv/ HP PS r based on standard air conditions of r direct-injection fuel system with
25"C (77"F) and 99 kPa (29.32" ) Hg individual ustment-free inj ection
adj
Gross power 83 111
pumps and valves.
dry barometer.
Net power 78 105
r
r used 35o API gravity fuel having an 3-ring aluminum-alloy pistons, cam-
LHV of 42 780 kJ/kg (18,390 Btunb) ground, tapered and cooled bY oil
The following ratings apply at 2400 rpm when used at 30"C (86"F) [ref. a fuel spray.
when tested under the specified standard density of 838.9 elL (7.001 lb/gal)1. r two alloy-steel valves per cylinder.
conditions for the specified standard: r Net power advertised is the power r tapered connecting rods.

NET POV/ER KW HP PS available at the flywheel when the r uniflow cylinder head design with
engine is equipped with fan, air integrally cast intake manifold.
Caterpillar 78 105
cleaner, muffler and alternator. r deep-skined cast cylinder block.
rso 9249 78 105
r
DrN 70020 109 r no derating required up to 2286 m induction-hardened, forged
(7,500 ft) altitude. crankshaft.
EEC 80/1269 78 105
r internal fuel, oil and water passages
instead of external lines.
Dimensions r gear-driven water pump and Power
Bore 105 mm 4.13 ln. steering pump.
Stroke 127 mm 5.0 in. r direct-electric 24-volt starting and
Displacement 4.4 liters 268 cu in. charging system with two I2-volt,
100 amp-hour batteries and 50-amP
alternator.
Exhaust Emissions
r standard oil cooler.
The Caterpillar 3lI4T meets all
r ether starting aid, air intake heater,
88177 |EEC Directives.
and heavy-duty starting system are
available.
Measured Emission Values g/hP-hr
Hydrocarbons (HC) 0.25
Carbon Monoxide (CO) 1.74
Nitrous Oxide (N2O) 5.73

Transmission
Caterpillar power shift transmission with four forward and three reverse speeds.

Maximum travel sPeeds Maximum travel sPeeds Features

(Std. Transmission & 17.5'25 tiresl (Optional Low SPeed Transmission r electrically controlled.
km/h MPH & 17 .5-25 tires) r single lever control for easy and
km/h MPH precise control of gear and direction
Forward 1 7.1 4.4
Forward 1 3.9 2.4 changes.
8.2
13.1
8.1 5.1
r separate control to lock in neutral.
23.6 14.8 r full power directional and speed
38.2 23.9 2r.0 13.1
changes.
Reverse 1 7.1 4.4 38.2 23.9 r smooth gear-to -gear shifting provides
8,2 Reverse 1 3.9 2.4 unmatched operator comfort.
13.1
23.6 14.8 8.1 5.1 r full-match torque converter.
2r.0 13.1 r Standard Autoshift control provides
effortless automotive-style automatic
shifting.
I optional Low Speed Transmission for
better match with attachments
requiring high hydraulic flow.

lT24F specifications
Axles Brakes Final Drives
Fixed front, oscillating rear (+12"). Meets the following standards: OSHA, Planetary final drives consist of ring
sAE Jr473 OCT 90,ISO 3450-1985. gears and planetary carrier assemblies.
Features
t Caterpillar axle with fully-enclosed Service brake features Features
brakes and final drives. t inboard oil-immersed disc brakes. I ring gears are pressed in and doweled
r patented Duo-Cone Seals between r completely enclosed and sealed. to axle housings.
axle and housing. r adjustment-free. r carrier assemblies include planet
r rear wheel can raise or drop a total of r separate circuits for front and rear gears with full-floating bronze sleeve
412 mm (16.2'). axles. bearings.
r axle mounts use 24 mm (1 in.) r dual pedal braking system.
diameter grade 8 bolts. t separate switch neutralizes the
r conventional differentials standard. transmission during braking.
r limited-slip and NoSPIN differentials r brakes are fully integrated with
are optional on front,reat or both hydraulic systeffi, no air system
axles. required.
r rear axle trunion has remote Secondary brake features
lubrication fitting. r Computerized Monitoring System
alerts operator if pressure drops.
r continually-charged nitrogen
accumulators provide stopping power
after loss of engine power.
Parking brake features
r mechanical, shoe-type brake.
r mounted on transmission output shaft
for positive manual operation.

Loader Hydraulic System

Open-centered, intemrpted series system with fult-flow filtering. System is completely sealed. Pilot-operated controls.

lmplement system, vane-type PumP Éydraulic cycle time

Output at 2400 RPM and Raise 5.3
6900 kPa (1000 psi) Dump 1.5
with SAE 10W oil at 66"C (150'F) 151 liters/min 39.9 gpm Lower, empty, float down 4.3
Relief valve setting 17 300 kPa 2,508 psi Total 11 .1 seconds
Lift cylinders, double acting: Features
bore and stroke 120.1 x 675 mm 4.75 x26.58" t completely enclosed system.
Tilt cylinder, double acting: r low effort, pilot-operated controls.
bore and stroke 101.6 x 729.8 mm 4.0 x 28.73' r full-flow filtering.
r reusable couplings with O-Ring Face
Seals.

lT24t specifications
Gab Tires Steering
Caterpillar cab and Rollover Protective Tubeless, nylon, loader design tires. Full hydraulic power steering. Meets
Structure (ROPS) are standard in North ISO 5010-1992, SAE J151 1-OCT90.
America and Europe. Choice of
r 17.5-25,12 PR (L-2). Ratings
Features r 17.5-25,12 PR (L-3).
r meets OSHA and MSHA limits for r 17 .5-25, radial (L-2 equivalent). Minimum turning radius
operator sound exposure with doors r 17 .5-25, radial (L-3 equivalent). (over tire) 5105 mm (16'9")
and windows closed (according to r 17.5-25, radial (L-2tL-3 equivalent). Steering angle, each direction 40"
ANSVSAE Jtr66 MAY90). Note Steering cylinders, two
r ROPS meets the following criteria: In certain applications (such as load- bore 69.9 mm12.75"
- SAE J394. and-carry work) the loader's productive Hydraulic output at 2400 RPM and
_ SAE J1O4O APR88. capabilities might exceed the tires' 6900 kPa (1000 psi)
- NO 3471-1986. tonnes-km/h (ton-MPH) capabilities. 104 liters/min (27.5 gpm)
r also meets the following criteria for Caterpillar recommends that you consult
Relief valve
Falling Objects Protective Structure: a tire supplier to evaluate all conditions
_ SAE J231 JAN81. setting 19 700 kPa (2850 psi)
before selecting a tire model. Other
- rso 3449-1984. special tires are available on request. Features
Note
r center-point frame articulation.
V/hen properly installed and maintained,
r front and rear wheels track.
the cab offered by Caterpillar when
r dedicated variable flow piston
tested with doors and windows closed steering pump provides flow at all
according to ANSVSAE Jl166 MAY90, engine and ground speeds.
meets OSHA and MSHA requirements
r steering-wheel operated metering
for operator sound exposure limits in pump controls flow to steering
effect at time of manufacture. cylinders.
r full-flow filtering.
Measured Operator Sound Levels
r adjustable steering column.
rso 6394 & 86l662tEEC. 7s dB(A) r high-impact rubber steering stops.
ANSVSAE Jl166 MAY90 75 dB(A)
r supplemental steering system
available to meet roading regulations
in various countries.

Attachment Gontrols Seruice Refi ll Gapacities

Pilot-operated lift and tilt circuits. L Gallons
Fuel tank 157 41.5
Cooling system 35 9.3
Lift circuit features Controls
r four positions: raise, hold, lower, r two-lever control. Crankcase 10 2.6
float. I optional single-lever control Transmission 23 6.r
r can adjust automatic kickout from available. Differentials and final drives
horizontal to full lift. I both types of controls available front 2t 5.6
Tilt circuit features with three-valve hydraulic system. 2T 5.6
r three positions: tilt back, hold, dump.
r controls can be locked for roading.
Hydraulic system
r two-speed dump for faster dump (including tank) 79 20.9
speed.
Hydraulic tank 53 14.0
r can adjust automatic bucket/
attachment positioner to desired
loading angle.
r does not require visual spotting.
r two-position selector for return-to-
work angle with bucket or forks.

lT24t specifications
Dimensions with Bucket
All dimensions are approximate

a Dimensions vary with

bucket. Refer to OPerating
Specifications chart on Page 14.

3fl16 mm
3134 mm (11'6")
(10'4")

3070
(10'

1667 mm
(5'6"1 'lflejq'>
2700 mm
(g'10")

Change in
Ground vertical
Tread width Width over tires clearance dimensions
mm inches mm inches mm i nches mm i nches

15.5-25 12 PR L-2 1850 73 2213 89.5 282 1 1.1 -39 1.5

17.5-25,12 PR (L-2) standard 1850 73 2328 9r.6 321 12.6

Supplementa I Specifications

Ghange in Operating Ghange in Articulated

Weight Static Tipping Load
tb

ll .5 - 25,12 PR (L-2) tires & rims

n.5 - 25,12 PR (L-3) tires & rims +111 +245 +58 +128
I7 .5 - 25, RadiaI (L-2 equivalent) tires & rims +45 +99 +23 +51

17 .5 - 25, Radial (L-3 equivalent) tires & rims +166 +366 +88 +194
17 .5 - 25, Radial (L-2 I L-3 equivalent) tires & rims +160 +353 +85 +187

Air conditioner +41 +IO4 +41 +90

Canopy, ROPS (less cab) -2r0 -463 -r63 -359

Crankcase guard +42 +93 +54 +119

Powertrain guard +14 +163 +68 +150

lT24t specifications
0peration Specifications

General Purpose Bucket

With Bolt-On Cutting Edge With Bolt-On Teeth

Rated bucket capacity m3 1.80 1.60 r.40 r.70 1.50 1.30

yd' 2.40 2.00 1.80 2.30 2.00 1.80

Struck capacity m' 1.50 1.40 r.20 r.40 1.30 1.10

yd' 2.00 1.80 1.50 1.90 t.70 r.40

Width mm 2549 2395 2395 2578 2424 2424

ft/in 9',4 '|', r0" 7', r0" 8', 5" 'l' lI" '|', 11"

Dump clearance at full mm 2752 2t52 2812 2640 2640 2699

lift and 45o discharge ft/in 9', 0" 9', 0" 9', 3" 8' 8" 8' 8" 8', 10"

Reach at full lift mm 1088 1088 r029 I 183 I 183 TT23

and 45o discharge ft/in 3', '7" 3', 7" 3',5" 3', rl" 3' LI" 3'8"
discharge
Reach at 45" Inm r547 1547 15 18 t579 r579 1553

and2130 mm (7 ftO in) clearance ftlin 5',8" 5', 8" 5' 0" s', 2" s', 2" s', l"
Reach with lift arms rnm 237 4 2374 2290 2520 2520 2436
horizontal and bucket level ftlin 1', r0" 1', 10" 1', 6" 8' 3" 8' 3" 8', 0"

Digging depth r32 r32 r32 r46 r46 r46

5.2" 5.2" 5.2" 5.'7" 5.7" 5.7"

Overall length mm 677 I 677 r 6687 6894 6894 6810

ftlin 22', 3" 22',3" 2r' lr 22', 7" 22', '.|" 22', 4"

Overall height with bucket mm 493r 4855 47 67 4932 4855 47 67

at full raise ft/in 16' 2" T5' TT' 15', 8" 16'2" 15' 11" 15',8"

Loader clearance circle with M 10.81 10.76 r0.t2 r0.92 10.87 10.83

bucket in carry position fUin 35', 6" 35', 4" 35', 2" 35'10" 35',8" 35', 6"

Static tipping load straight* kg 6035 6091 6172 6r07 6169 6249
1b t3,307 13,43r 13,6t6 13,466 13,603 13,779

Static tipping load kg 5228 5284 5360 5294 5356 5428

full 40' turn* lb 1r,528 I 1,651 11,819 r1,673 1 1,810 11,969

Breakout force kg 8782 8813 96r6 9400 9446 10,365

lb 19,364 19,433 2r,203 20,727 20,828 22,855

Operating weight kg 9989 99r5 9890 9973 9900 9874

lb 22,025 2L,863 2r,807 21,990 21,830 2r,772

* Static tipping and operating weights shown include lubricants, full fuel tank, ROPS cab,
80 kg (176 lb) operator and 17.5 x25 12 PR (L2) tires.

t4 lT24F specifications
Typical material densities-loose

kg/m' lb/yd. kg/m' tb/yd,

Basalt I 960 3305 Gypsum

Bauxite, Kaolin t420 2394 broken 18 l0 3052

Clay crushed I 600 2698

natural bed I 660 2799 Limestone

dry 1480 2495 broken l 540 2596

wet 1 660 2199 crushed I 540 2596

Clay and gravel Sand

dry t420 2394 dry, loose 1420 2394

wet 1 540 2596 damp 1 690 2849

Decomposed rock wet I 840 3102

I57o rock, 25%o earth 1960 3305 Sand and clay

50Vo rock, 507o earth r720 2900 loose I 600 2698

257o rock, I5Vo earth t5t 0 2647 Sand and gravel

Earth dry n20 2900

dry, packed 1510 2546 wet 2020 3416

wet, excavated I 600 2698 Sandstone 15 10 2546

Granite Shale r250 2r07

broken I 660 2199 Slag

Gravel broken I 750 2950

prtrun I 930 3254 Stone

dry 1510 2546 crushed 1 600 2698

dry, 6-50 mm (.2-2") r 690 2849

wet, 6-50 mm (.2-2") 2020 3406

Bucket Size Selector

Bucket
Capacity
ydt mt
3.5 2.1

2.5

2.3

2.1

2.50 1.9

1.7

2.00 1.5

1.15 1.4

1.50 1.2

0.9
.09 t.3 1.5 1.7 1.9 21 2.3 Kg/m'
1.5 20 2.5 3.0 3.5 4.0 lb/yd'
Material Density (Thousands)

lT24t specifications 15
Dimensions with Forks
All dimensions are approximate

a Dimensions vary with

bucket. Refer to Operating
Specifications cha rt below.

1584 mm
<_ (5,2,,)

3629 mm
(11'11")

32 mm
(1.26")

Operating Specifications with Forks

1050 mm 1200 mm 1350 mm

Fork Tine Length (3',5") (3', 11"1 14' 5" I

Operating Lo ad at 40o articulation 3245 kg (7,155 lb) 3232 kg (7 ,l2l lb) 3220 kg (7,100 lb)
Ground to top of tine clearance 3629 mm (l 1' I 1") 3629 mm (1 1' 1 1") 3629 mm (11' 11")
Reach with arms horizontal and forks level 1584 mm (5' 2") 1584 mm (5' 2") 1584 mm (5' 2")
Overall Length 6939 mm (22' 9") 7089 mm (23' 3") 7239 mm (23' 9")
Static tipping load with level arms and forks, 4952 kg 10,919 lb)
( 4934 kg (10,879 lb) 4918 kg ( 10,844 lb)
600 mm (23.6") load center, straight*
Static tipping load with level arms and forks, 1321 kg (9,541 lb) 4309 kg (9,501 lb) 4293 kg (9 ,466Lb)
600 mm (23.6") load center, full 40o turn*
Operating weight 9588 ke QI,l4zlb) 9605 ke Ql,,llg lb) 9618 kg (21,208lb)

* Static tipping a nd operating weig hts shown include lubricants, full fuel tank, ROPS cab,
80 kg (1761b) operator and 17.5 x25 12 PR (L2l tires.

I6 lT24F specifications
Dimensions with Material Handling Arm
All dimensions are approximate

3009 mm
(g'10")

2396 mm
(7'1t'l

l7llil mm
(5'10',)

6617 mm
(21' g')

5828 mm
(19'1"1

5039 mm
(16',d')

3?57nm+l
(10't') ' I

.?Illtt"-,
I

(14'0"1
5257 mm
(17',3"1

1786 mm
(5'lo')

2576 mm
(g'd')

ilil67 mm
(11'1"1

Operating Specifications with Material Handling Arm

Material Handling Arm Position Retracted Mid-Position Extended

Operating load at 40o afticulation kg (3 ,47 5 lb)

157 6 1245 kg (2,745 lb) 1031 ke (2273rb)
Static tipping load, straightx 3605 kg (7,949 lb) 2852kg (6,289 lb) 2362 kg (5,208 lb)
Static tipping load, full 40o turn* 3151 kg (6,948 lb) 2490 kg (5,490 lb) 2062kg (4,547 lb)
Operating weight 9473 ke Q1,483 lb) 9473 ke Q1,483 lb) 9473 ke Q1,483 lb)

* Static tipping and operating weights shown include lubricants, full fuel tank, ROPS cab,
80 kg (176 lb) operator and 17.5 x25 12 PR (L2) tires.
NOTE: Machine stability and operating weights are affected by tire size, tire ballast and other attachments.

lT24F specifications
Standard Equipment
Standard Equipment may va^ry. Consult your Caterpillar dealer for specifics.

Air cleaner, dry type Gauge group: Quick Coupler, Caterpillar

Alarm, back-up - fuel level Steering stops, cushioned
Alternator, 50-amp - transmission/torque converter Switch,key start & stop
Batteries, 12V, two temperature Third valve, for use with quick coupler
Blower fan - engine coolant temperature Tilt steering column
Brakes, inboard, oil-immersed - hydraulic oil temperature Torque converter
Cab, ROPS (sound suppressed and Horn, steering wheel mounted Transmission neutral izer with lockout
pressuized) with: Hour meter, electric Transmission, power shift, w/Autoshift
- heat/defroster Hydraulic control, three-lever Vandalism protection grouP
- personal storage space Hydraulic control lock (lockable service points)
- rear view mirrors (2 inside) Implement positioner, two-position
- seat, fully-adjustable suspension Indicators:
- seat belt, retractable - air cleaner service
- tinted safety glass - hydraulic oil level sight gauge
- wiper and washer (front/rea,r) Lift kickout, automatic * Functions analyzed by Electronic
Counterweight Lift/tilt kickout neutr alizer Monitoring System
Differentials, conventional ' Lighting system:
Gategory l: Alternator and fuel level.
Dump, two-speed - brake lights
Electrical system, 24Y - working lights, halogen Gategory ll: Coolant, hydraulic oil
Electronic Monitoring System (EMS)* (2 front,2 rcar) and transmission oil temperatures.
Engine, Caterpillar 3ll4T Muffler
Engine enclosure, lockable Parking brake Gategory lll: Engine oil and brake
Fenders (fronthear) Pump, fuel priming pressures, parking brake engaged,
supplemental steering if so equipped,
low hydraulic oil level indicator.

18 lT24t specifications
0ptional Equipment
Optional Equipment may vary. Consult your Caterpillar dealer for specifics.

Air conditioner (non-CFC refrigerant) Hydraulic fourth valve: Ride control system
Batteries, heavy-duty (two) - diverter valve Rotating warning beacon
Buckets/Ground engaging tools - quick disconnects Seat, Caterpillar Contour Series
Canopy, ROPS - hydraulic lines and control Starting aid, air intake heater
Cooler, hydraulic oil Hydraulic third valve accessory Starting aid, ether
Differential, Limited Slip package: Staning receptacle
- front axle only - diverter valve Steering, supplemental
- rear axle only - quick disconnects Tires, 17 .5 x 25
- both axles - hydraulic lines Tool kit
Differential, NoSPIN, reîr axle only Lights, flood Tool box, lockable
Guard, crankcase Material handling ann Transmission, low speed version
Guard, instrument panel (for use with Mirrors, external (two) Turn signals
ROPS canopy) Pallet Forks Visor Group
Guard, power train - 1050 mm (3' 5") tines Wipers, intermittent control (front only)
Heater, engine coolant - 1200 mm (3' I1") tines
Hood enclosure, solid, includes: - 1350 mm (4' 5") tines
- cover for open hood Radio installation package:
- perforated side doors - Speakers
Hydraulic control, single lever - 24V ll2Y converter
- antenna & cable
- mounting bracket
- hardwarc & wiring

lT24F specifications
lT24t I nteg rated Too I ca rri er

Your Gat Dealer

J

There is one very important component included with

every Caterpillar IT24F Integrated Toolcarrier that no one
else can offer: your Cat Dealer.

Whether you have questions about perfonnance, service or

financing, your Cat Dealer has the answers. He is dedicated
to helping you make the right equipment choice for your
requirements.

Plus, your Cat Dealer has most parts you will ever need for
your Cat equipment right on the shelf. If not, the Dealer's
worldwide computeized network will immediately find the
closest location of the part you need, minimizing your
downtime. There are also many Caterpillar
Remanufactured parts available for the IT24F, keeping
your service costs low.

V/hen you need more details about the IT24F, contact your
Cat Dealer. You'll find he's easy to talk to. And he's
genuinely interested in talking to you.

@ 1996 Caterpillar
Printed in U.s.A.
AEHO5019-01 (1-96)
(replaces AEHO5019) Materials and specifications are subject to change without notice.