Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

FreeWire v1.0 161201

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PREPARATION INSTALLATION BASIC OPERATION

Knowing the FreeWire Layout Installing on the Handlebar Turning On/Off the FreeWire
   











AUX Port
LED

ON OFF

Power Switch DC Power Charging To turn on the FreeWire, slide the Power Switch to I. To turn off, slide
Port the Power Switch to O.

Center Button
Placing on the Mounting Cradle Charging the FreeWire
Onboard Audio In
& Firmware
Upgrade Port
Charging
Fully charged

Charging LED

or
AC adapter
USING THE FREEWIRE TROUBLESHOOTING
Pairing with a Sena Bluetooth Headset Factory Reset
If you want to restore the FreeWire to factory default settings, press and
hold the Center Button for 14 seconds. Tap the Center Button. The headset
automatically restores the default settings and turns off.

Note If you reset your headset paired with your FreeWire to factory default
settings, you should reset your FreeWire to factory default settings as well in
order to pair them again.

Press the Center Button for 5 seconds.


Fault Reset

Quick Start Guide


Note 1. Turn on your Sena Bluetooth headset and enter Mobile Phone Pairing
Mode before you enter pairing mode of your FreeWire. If the FreeWire is not working properly for any
2. The FreeWire will transit wireless audio signals once it is paired with the reason, push the pin-hole Reset button located on
headset. If Bluetooth connection is lost, tap the Center Button once. the back of the FreeWire while it is powered on.
Bluetooth® CB and Audio Adapter

Connecting with the Onboard Audio System

Micro USB to 7 Pin DIN Cable for


Harley-Davidson or Micro USB to
5 Pin DIN Cable for Honda Goldwing
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: support@sena.com
You can download the full version of the manual and view other
Sena products at the Sena website: www.sena.com. 16.Dec

You might also like