See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/278678103

Analysis and Simulation of Brain Signal Data by EEG Signal Processing

Technique using MATLAB

Article  in  International Journal of Engineering and Technology · March 2013

CITATIONS READS

20 7,998

3 authors, including:

Sasikumar Gurumurthy
Jerusalem College of Engineering
89 PUBLICATIONS   106 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Modern car parking with micro controller build intelligent circuit View project

Design and Development of Website for contact Information based on people need for their Region View project

All content following this page was uploaded by Sasikumar Gurumurthy on 18 June 2015.

The user has requested enhancement of the downloaded file.

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

Analysis and simulation of brain signal data

by EEG signal processing technique using
MATLAB
Sasikumar Gurumurthy #1, Vudi Sai Mahit #2, Rittwika Ghosh #3
School of Computing Science and Engineering,
VIT University, India
1
g.sasikumar@vit.ac.in
2
vudi.saimahit@vit.ac.in
3
rittwika.ghosh2009@vit.ac.in
Abstract— EEG is brain signal processing technique that allows gaining the understanding of the
complex inner mechanisms of the brain and abnormal brain waves have shown to be associated with
particular brain disorders. The analysis of brain waves plays an important role in diagnosis of different
brain disorders. MATLAB provides an interactive graphic user interface (GUI) allowing users to flexibly
and interactively process their high-density EEG dataset and other brain signal data different techniques
such as independent component analysis (ICA) and/or time/frequency analysis (TFA), as well as standard
averaging methods. We will be showing different brain signals by comparing, analysing and simulating
datasets which is already loaded in the MATLAB software to process the EEG signals.
Keyword- EEG, Signal processing, MATLAB, Brainwaves, Diagnosis
I. INTRODUCTION
The human brain is one of the most complex systems in the universe. Nowadays various technologies exist to
record brain waves and electroencephalography (EEG) is one of them. This is one of the brain signal processing
technique that allows gaining the understanding of the complex inner mechanisms of the brain and abnormal
brain waves have shown to be associated with particular brain disorders.
II. BRAIN SIGNAL PROCESSING
Signal processing is the enabling technology for the generation, transformation, and interpretation of
information. At different stages of time our brain reacts differently. These brain signals used for various
purposes so that it is possible to study the functionalities of brain properly by generating, transforming and
interpreting the collected signal. This process is known as brain signal processing.
A. Brain Waves and EEG
The analysis of brain waves plays an important role in diagnosis of different brain disorders. Brain is made up
of billions of brain cells called neurons, which use electricity to communicate with each other. The combination
of millions of neurons sending signals at once produces an enormous amount of electrical activity in the brain,
which can be detected using sensitive medical equipment such as an EEG which measures electrical levels over
areas of the scalp.
The electroencephalogram (EEG) recording is a useful tool for studying the functional state of the brain and
for diagnosing certain disorders. [5] The combination of electrical activity of the brain is commonly called a
Brainwave pattern because of its wave-like nature.
III. OVERVIEW
EEG signals contain more relevant information about brain disorders and different types of artifacts. Signals
in the form of dataset are already loaded to the tool so we will be using that signals to plot the data and
visualization of the time-frequency domain plots which can be displayed all together.
Basically we will be monitoring the EEG signals according to the placement of electrodes which is called
montages. After that we will observe the EEG signals to recognize and eliminate different disease related
artifacts. Then unwanted signal will be subtracted by differential amplifier. Finally we will proceed for the
signal filtering based on the different types of brainwave frequencies to diagnosis and simulate variety of brain
disorders by using MATLAB.

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2771

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

EEG
DATASET USER

Fig. 1. Overview of the EEG Signal Processing Technique

IV. ANALYSIS AND DESIGN

A. Study of Existing EEG Hardware procedure techniques
Steps involved in the existing techniques are- The electrodes are placed to the brain by wires and electrical
activity of the brain will get recorded to a computer .It will show the activity as a series of wavy lines drawn as
an image on the computer screen.
Patients need to lie down and close their eyes during the recording. The recording may be stopped from time
to time to allow the patient for stretching and repositioning.
Different things will be done by the patient during the test to record the brain activity at that time. Such as
Taking breathe deeply and rapidly for few minutes and Looking at a bright, flashing light for checking the
stimulation.
After recording the brain activities by the above mentioned process brain disorder symptoms will be detected.
V. SYSTEM DESCRIPTION
In our project we have included various features .Such as EEG montages - Montage means the placement of
the electrodes. The EEG can be monitored with either a bipolar montage or a referential one. Bipolar means that
just to use two electrodes on the scalp on all the sides and for reference electrode for one side of the brain. The
referential montage means only having a common reference electrode in both the side of the brain. In this part
we will be showing how brainwaves will vary according to the placement of electrodes.
1) Right Montages: Patient data has collected according to electrodes are placed in the right side of the brain,
so it will show the waves related to the right side of the brain based on time-frequency analysis.
2) Left Montages: Patient data has collected according to electrodes are placed in the left side of the brain,
so it will show the waves related to the right side of the brain based on time-frequency analysis.
3) Both Side Montages: Patient data has collected according to electrodes are placed in the left and right side
of the brain, so it will show the waves related to the right side of the brain based on time-frequency analysis.
A. EEG Channels
The electrical activity of the brain is conducted by wires from the scalp and electrodes are placed by using
EEG machine. The inputs to the hardware EEG machine are then used to compose a montage, which is a
specific arrangement or array of electrodes that display the EEG signal. In our project we are dealing with
basically 20 channels of the brain because EEG hardware machine deals with only till 20 channels of the brain.
Each channel basically compares input data taken based on placement of the two electrodes. Upward deflection
of the wave is defined as negative and occurs when the first input data is negative with respect to the second
input data or second input data is positive with respect to the first input data. A downward deflection of the
brainwave is defined as positive, and occurs when first input data is positive with respect to second input data or
when second input data is negative with respect to first input data.
B. Sensitivity
Amplitude is the magnitude of the EEG activity which is measured in microvolts (µV). It is determined by
measuring the brainwave deflection in millimeters (mm) at specified machine sensitivity (µV /mm). We have
analyzed the brainwaves according to the collected sensitivity values of the patients, EEG procedures are
performed at a sensitivity rate of 7 µV /mm, such that a 10 mm deflection of waves signifies amplitude of 70 µV.
We have measured with the sensitivity values 10 µV /mm, 15 µV /mm, 20 µV /mm, 30 µV /mm, 50 µV /mm
because it is easier to determine the brainwave patters with these values.
C. Filtering
Low- pass filtering is used for smoothening the brainwaves and high-pass filtering is used for sharpening the
brainwaves in order to make the signals more clearly to the viewer. According to the patients EEG hardware
data collected we have shown in our project two types of filtering technique options such as – Low – pass
frequency filters and High- pass frequency filters
For the low – pass frequency filters generally setting the maximum range till 1Hz and for high – pass
frequency filters setting the maximum range till 70Hz because this the standard limit of filters.

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2772

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

D. Frequency Sweeping
Sweeping basically reduces the complexity towards analysing the brainwaves for EEG signal processing. At
last we will sweep the signal to reduce the complexity for the visualization of the brainwaves. In this we will be
using linear frequency sweeping and it has a fixed rate of frequency per time. Basically it is measured as Hz/sec.

VI. ARCHITECRUL DESIGN

Monitoring EEG Signal filtering

t

Detecting brain signals Measuring the Sensitivity

of the signal and sweeping
through different channels

Result

Figure 2: System architectural design

VII. METHODOLOGY
A. Procedures
1) Different EEG signals are collected as a form of dataset in the MATLAB;
2) Load the data into the software for brain signal processing;
3) Process the datasets;
4) Extract and select the specific features for different EEG datasets;
5) Classify the datasets according to the product features such as- montages, channels, sensitivity, filtering
and sweeping
6) Check the variation of different brain waves based on their characteristics,
7) Select the specific montages such as – left side montage, right side montage or both side montages to
check change in different brainwaves.
8) Then select the channels out of 20 channels for viewing more detailed waveforms.
9) By fixing the sensitivity values of the collected EEG data we will be setting filtering range of the
signals for high frequency (50 - 70 Hz) or for low frequency (0.1 - 1 Hz); we will change the values of
sweeping also according to the data.
10) At last we will get the final EEG signal in waveform.

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2773

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

B. Flow Chart

START

STORING EEG
DATASETS IN MATLAB

LOAD AND PROCESS

THE DATASETS INTO
THE SOFTWARE

CLASSIFY THE
DATASETS BY FEATURES

SELECT RIGHT /LEFT

/BOTH MONATAGES

ACCES BRAIN
CHANNELS AND CHECK

NO

SIGNAL
FILTERING?

YEs

FREQUENCY SWEEPING

END

Figure 3: Flowchart

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2774

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

C. Implementation

Figure 4: Welcome page

This is the welcome page of our GUI which leads to the kind of selection of the next section by selecting the
‘click here’ button.

Figure 5: Sample results and other records page

This page is loaded after selecting the ‘click here’ button of the first page. In this page two options are
mentioned. For checking the exiting patients records select the first option and for diagnosis of different
brainwaves forms select the second option.

Figure 6: Brainwaves pattern

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2775

 Sasikumar Gurumurthy et.al / International Journal of Engineering and Technology (IJET)

The above is the result obtained by the changes made in montage module just by selecting right montage of
the brain and different frequencies of brainwaves can be easily determined.
VIII. ANALYSIS AND RESULT
TABLE I
Different patient data montage

5.6014109e-001 6.9510397e-004 2.5127513e-001

8.8967125e-001 2.3849760e-002 1.2872483e-001
TABLE II
Different patient data of brain montage

4.8976380e-001 1.9324533e-001 8.9589157e-001

3.4878481e-001 4.5134058e-001 2.4090500e-001
TABLE III
Different patient data of brain sensitivity

5.7083843e-001 9.9685021e-001 5.5354157e-001

5.7161573e-001 1.2218915e-001 6.7116623e-001
TABLE IV
Different patient data of Signal Filtering

1.5194708e-001 3.9710884e-001 3.7472247e-001

8.8665840e-002 8.3825559e-001 5.8471862e-001
TABLE V
Different patient data of Signal Sweeping

4.3390472e-002 6.9162515e-001 9.7898547e-001

2.6296403e-001 6.8056620e-001 2.3365315e-001

IX. CONCLUSION
The above mentioned project has clearly demonstrated the concepts about open source plug-ins, running
under the platform MATLAB environment and its ability to process biophysical data by different way such as -
using simplicity of its command line language or using the many MATLAB functions and the methodology
related to the analysis of the brain signal processing through MATLAB software toolbox. It has been described
in detail the procedure in the modeling of EEG signals and insight brain signals recorded during surgical
procedure.
ACKNOWLEDGMENT
The second and third author thanks to the Department of computer science, VIT University and Special
thanks to their project guide Prof.Sasikumar Gurumurthy, Assistant Professor (Senior), SCSE, VIT University
for his kind Guidance for the project work. This work has been (Partially) supported by the B.Tech program in
SCSE, VIT University, India.
REFERENCES
[1] Charles D.Creusere, Jim Kroger,Srikanth R.Siddenki, Philip Davis,Joe Hadrin(2012), ”Assesment of subjective audio quality from eeg
brain responses using time space frequency analysis”, IEEE research paper, page 2704
[2] Esteve Gallego-Jutgla,Mohamed Elgend, Francois vialatte, Jordi Sole-Casals, Andrezej cichocki,Charles Latchoumane, Jaesung Jeong,
Justin Dauwels(2012) ”Diagnosis of alzeheimer’s disease from eeg by means of synchrony measures in optimized frequency bands” ,
IEEE research paper, page- 4266-4267
[3] Wallace E, Ruedade L, Reilly RB, Doherty CP.,(2012)“The limitations of neuroimaging – a possible role for quantitative
Electroencephalography” , Proceedings of the Irish Neurological Association, Cork. 61.
[4] O. A Padierna Sosa, Y. Quijano, M. Doniz and J.E Chong Quero,(2011) “Development of an EEG signal processing program based on
EEGLAB”, IEEE research paper, Page 199.
[5] Kostas Michalopolous, Vasiliki Iordanidou, Giorgos A Giannakakis, Konstantina S Nikita and Michalis Zervakis
(2011)”Characterization of evoked and induced activity in eeg and assessment of intertrail variability” ”, IEEE research paper, page
978.
[6] Ms. Antara Bhattacharya, Dr N. G. Bawane, Ms. S. M Nirkhi (2011) “Brain computer interface using EEG signals”, IEEE research
paper, Page 2.
[7] Yuan(2010)”Detection of epileptic seizure based on eeg signals”, IEEE research paper, page 4209
[8] Ida M.V. Caminiti, Fabrizio Ferraioli, Alessandro Formisano, Raffaele Martone (2010) ”Strategies for brain sources and tissues
properties identification from eeg/meg and eit signals” IEEE research paper, page 978.
[9] Nolan H.,Whelan R., Reilly R.B., Bülthoff H.H.,Butler J.(2009), “Acquisition of Human EEG Data during linear Self-Motion on a
Stewart Platform”,IEEE research paper, page 2343.

ISSN : 0975-4024 Vol 5 No 3 Jun-Jul 2013 2776

View publication stats