Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • BNBC

    Uploaded by

    Fahim Ahmed Bhuiyan
    8 views1 page
    This section provides requirements for reinforced concrete structures in areas with different seismic design categories (SDC). For SDC D, special seismic detailing is required per Sections 8.3.3 to 8.3.8 in addition to Chapter 6 provisions. For SDC C, intermediate seismic detailing per Section 8.3.10 is required in addition to Chapter 6. For SDC B, ordinary detailing per Section 8.3.9 is required in addition to Chapter 6. Structures can also use higher SDC detailing provisions to take advantage of lower design forces. General requirements include considering member interactions in analysis, allowing rigid non-lateral members if their effects are accommodated, and complying with seismic detailing for members transmitting earthquake forces

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This section provides requirements for reinforced concrete structures in areas with different seismic design categories (SDC). For SDC D, special seismic detailing is required per Sections 8.3.3 to 8.3.8 in addition to Chapter 6 provisions. For SDC C, intermediate seismic detailing per Section 8.3.10 is required in addition to Chapter 6. For SDC B, ordinary detailing per Section 8.3.9 is required in addition to Chapter 6. Structures can also use higher SDC detailing provisions to take advantage of lower design forces. General requirements include considering member interactions in analysis, allowing rigid non-lateral members if their effects are accommodated, and complying with seismic detailing for members transmitting earthquake forces

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    8 views1 page

    BNBC

    Uploaded by

    Fahim Ahmed Bhuiyan
    This section provides requirements for reinforced concrete structures in areas with different seismic design categories (SDC). For SDC D, special seismic detailing is required per Sections 8.3.3 to 8.3.8 in addition to Chapter 6 provisions. For SDC C, intermediate seismic detailing per Section 8.3.10 is required in addition to Chapter 6. For SDC B, ordinary detailing per Section 8.3.9 is required in addition to Chapter 6. Structures can also use higher SDC detailing provisions to take advantage of lower design forces. General requirements include considering member interactions in analysis, allowing rigid non-lateral members if their effects are accommodated, and complying with seismic detailing for members transmitting earthquake forces

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Detailing of Reinforced Concrete Structures Chapter 8

    8.3 EARTHQUAKE-RESISTANT DESIGN PROVISIONS

    8.3.1 Scope
    This section contains special requirements for design and construction of reinforced concrete members of a
    structure for which the design forces, related to earthquake motions, have been determined on the basis of
    energy dissipation in the nonlinear range of response.
    8.3.2 Provisions
    (a) The provisions of Chapter 6, shall apply except as modified by the provisions of this Section.
    (b) Structures assigned to seismic design category SDC D (see Chapter 2), all reinforced concrete structures
    shall satisfy the requirements of special seismic detailing as given in Sections 8.3.3 to 8.3.8 in addition to the
    requirements of Chapter 6. The provisions for special moment frames exclude use of slab without beam as
    part of the seismic force-resisting system.
    (c) Structures assigned to SDC C (see Chapter 2), all reinforced concrete structures shall be built to satisfy the
    requirements of intermediate seismic detailing as given in Sec 8.3.10 in addition to the requirements of
    Chapter 6.
    (d) Structures assigned to SDC B (see Chapter 2), all reinforced concrete structures shall be built to satisfy the
    requirements of ordinary detailing as given in Sec 8.3.9 in addition to the requirements of Chapter 6.
    (e) Structures in lower SDCs are permitted to design with detailing provisions of higher SDCs to take advantage
    of lower design force levels.
    8.3.3 General Requirements
    Analysis and proportioning of structural members
    (a) The interaction of all structural and nonstructural members shall be considered in the analysis.
    (b) Rigid members which are not a part of the lateral force resisting system are allowed provided their effect on
    the response of the system is considered and accommodated in the structural design. Consequences of
    failure of structural and nonstructural members which are not a part of the lateral force resisting system
    shall also be considered.
    (c) Structural members below base of structure required to transmit forces resulting from earthquake effects
    to the foundation shall also comply with the requirements of this section.
    (d) All structural members which are not a part of the lateral force resisting system shall conform to Sec 8.3.9.
    Strength reduction factors
    Strength reduction factors shall be in accordance with Sections 6.2.3.2 to 6.2.3.4.
    Concrete in special moment frames and special structural walls
    Compressive strength of the concrete shall be not less than 21 N/mm 2. Specified compressive strength of
    light-weight concrete, shall not exceed 35MPa unless demonstrated by experimental evidence. Modification
    lightweight concrete in Sec 8.3 shall be in accordance with Sec 6.1.8 unless noted otherwise.
    Reinforcement in special moment frames and special structural walls
    (a) Requirements of Sec 8.3.3.4 shall apply to special moment frames, special structural walls and all
    components of special structural walls including coupling beams and wall piers.
    (b) Deformed reinforcement resisting earthquake-induced flexural and axial force, or both, shall comply with
    ASTM A706, BDS ISO 6935-2: 2007(E) and ASTM A615. Grades 275 and 420 reinforcement shall be
    permitted if:

    Bangladesh National Building Code 2015 6-413

    You might also like