BS-490 Chemistry Analyzer

BS-490 Chemistry Analyzer

Robust hardware

Enhanced Liquid System

Precise sample and reagent aspiration

Built in air bubble elimination prior to washing

High pressure interior probe wash

Carry-over <0.05%

Economy Usage
Light-Spot Flatting Technology facilitates lower

reaction volume

24 hour non-stop refrigeration at 2-10°C

Minimum sample volume: 1.5 μl

Reagent volume: 10 ~ 350 μl

States Cuvette Volume:120~360μl

Easy to perform maintenance

Front loaded reagent compartment for easier
access Debbie

Easy access for routine maintenance and

troubleshooting

Built in Step-by-Step maintenance guide

Intelligent Probe System functions

and smart protection Tailor made
Supports methods with up to 4 reagents

Vertical and horizontal collision protection

Automatic System Recovery

Liquid level detection, clot detection

 Advanced software

User-friendly Interface
Real-time analytical and carousel status monitoring

Bi-directional LIS interface transmission

Real-time QC Status Monitoring

Levy-Jennings chart and Twin-Plot chart

QC Out-of-Range real-time alarm

Customizable periodic QC reminder

Traceable Test Results

Historic data recall from reagent/ calibrator/

control archive

Intuitive software, intuitive software design,

easy historical results

Reflex Function
User-defined customizable reflexive assays

EMultiple reflexive criteria may apply to a

single assay

A single reflexive criteria may apply up to 20 assays

Test Summary
e for your lab Test summary reports & sample rerun available on

all assays and Quality Assurance

Facilitate computation of total test costs

Error Log Export function -facilitate error report

to engineers

Results Archive can be transferred to engineers

for evaluation
 Accurate, Reliable Results
To ensure accuracy, reliability and correlation of diagnostic data, Mindray utilizes

the International Standard in result reporting. To assure ease of report retrieving,

Mindray establishes the Mindray Clinical Chemistry Measurement System for

result traceability.

Standard reference system

Adopt JCTLM reference system

IFCC primary method for enzyme, ID/MS method for substrate

NIST, IRMM reference materials

JCTLM, Joint Committee On Traceability In Laboratory Medicine

NIST, National Institute of Standards and Technology,USA
IRMM, Institute for Reference Materials and Measurements,EU
IFCC, International Federation of Clinical Chemistry and Laboratory Medicine

Complete traceability process Proficiency testing for reference measurement

Complete calibration hierarchy and traceability chain based on Participate RELA (External quality control for reference laboratory)

ISO standard (EN/ISO17511) from reference system to routine to verify the accuracy of the value assignment procedure.

measurement system

Traceability chain of Mindray measurement system (Glu)

Calibration /
Traceability Material Procedure Implentation Uncertainty
Value Assignment
Uc(y)

SI unit,mmol/L

Reference material Primary Reference

SRM 917C measurement procedure

Mindray Master CDC Hexokinase

Calibrator reference method

Mindray Product Mindray standard

Calibrator Measurement system

End user’ Routine Mindray

Routine Sample
Mindray

Result
International standardization certification
International Standardization certificates of Cholesterol and HbA1c from CRMLN and NGSP.

More information refers to website (http://www.cdc.gov).

CRMLN (Cholesterol Reference Method of Laboratory Network)

NGSP(National glycosylated hemoglobin standardization program)

Matched calibrators and controls

Dedicated calibrators with traceability and specific target value

Convenient design of multi items of calibrators and controls combined into one vial
Long shelf life of lyophilized powder

Dedicated, high-quality reagents

Diagnostic function test panels

Test panels such as : Hepatic panel, renal panel, pancreatic panel, lipid panel, cardiac

panel, diabetic panel, rheumatic factor panel

Reliable analysis performance

EP series standard (CLSI)-evaluate and optimize reagent system for reliable performance

in precision, linearity, stability, specificity and anti-interference capability

ISO standard manufacturing

Mindray follows straightly the ISO certified manufacturing process to ensure every lot of

reagent in production is of supreme quality

Reagent Menu

Hepatic Panel Lipid Panel

Alanine Aminotransferase (ALT) Total Cholesterol (TC)
Aspartate Aminotransferase (AST) Triglycerides (TG)
Alkaline Phosphatase (ALP) HDL-Cholesterol (HDL-C)
γ-GlutamylTransferase (γ-GT) LDL-Cholesterol (LDL-C)
Direct Bilirubin (D-Bil) DSA Method Apolipoprotein A1 (ApoA1)
Direct Bilirubin (D-Bil)VOX Method Apolipoprotein B (ApoB)
Total Bilirubin (T-Bil) DSA Method Lipoprotein(a) [Lp(a)]
Total Bilirubin (T-Bil)VOX Method
Total Protein (TP) Immune Panel
Albumin (ALB) Immunoglobulin A (IgA)
Total Bile Acids (TBA) Immunoglobulin G (IgG)
Prealbumin (PA) Immunoglobulin M (IgM)
Cholinesterase (CHE) Immunoglobulin E (IgE)
α-L-fucosidase (AFU) Complement C3 (C3)
5'-nucleotidase (5'-NT) Complement C4 (C4)

Renal Panel Diabetes Panel

Urea (UREA) Glucose (Glu) GOD-POD Method
Creatinine (CREA) Modified Jaffé Method Glucose (Glu) HK Method
Creatinine (CREA)Sarcosine Oxidase Method Hemoglobin A1c (HbA1c)
Uric Acid (UA) Fructosamine (FUN)
Carbon dioxide (CO2) β-Hydroxybutyrate(β-HB)
Microalbumin
β2-Microglobulin (β2-MG) Rheumatism Panel
Cystatin C (CysC) C-reactive protein (CRP)
Retinol binding protein( RBP) Rheumatoid Factor (RF)
Antibodies Against Streptolysin O (ASO)
Cardiac panel
Creatine Kinase (CK) Pancreatitis Panel
Creatine Kinase-MB (CK-MB) α-Amylase (α-AMY)
Lactate Dehydrogenase (LDH) Lipase (LIP)
α-Hydroxybutyrate Dehydrogenase(α-HBDH)
High sensitive C-reaction protein( HS-CRP) Lung Panel
Homocysteine (HCY) Adenosine Deaminase (ADA)
Myoglobin(MYO) Angiotensin Converting Enzyme(ACE)
D-Dimer(D-Dimer)

Inorganic & Anemia

Iron (Fe)
Ferritin (FER)
Transferrin (TRF)
Calcium (Ca)
Magnesium (Mg)
Phosphate Inorganic (P)
Unsaturated iron binding capacity (UIBC)
Glucose-6-phosphate dehydrogenase (G6PD)
Mindray solution for clinical chemistry

Robust
hardware
Mindray
solution
for
clinical
chemistry

Advanced
software

Dedicated
reagent system

Mindray can now provide 60 parameters of dedicated reagents (more than 8 others are coming), covering
hepatic, renal, cardiac, lipids, diabetes, pancreatitis, inorganic ions and immunalassays, etc.,together with
original calibrators with metrological traceability as well as controls for BS-490 chemistry analyzer.
BS-490 Chemistry Analyzer
Technical Specifications

System function Reaction System

Fully automated, discrete, random access, Reaction rotor: Rotating tray, 90 cuvettes with automatic washing
STAT, urine and homogeneous immunoassays;STAT sample priority Cuvette: Optical length 5mm
Throughput: 400 photometric tests/hour, up to 240 tests/hour for ISE Reaction volume: 120~360µl
Measuring principles: Absorbance Photometry, Turbidimetry Operating temperature: 37°C
Methodology: End-point, Fixed-time, Kinetic, ISE (Optional) Temperature fluctuation: ±0.1°C
Single/Dual/Triple/Quadruple reagent chemistries, Mixing system: 2 independent mixers
Monochromatic/Bichromatic
Programming: User defined profiles and calculation Optical System
Light Source: Halogen-tungsten lamp
Sample Handling Photometer: Reversed optics, grating photometry
Sample tray: 90 positions for primary or secondary tubes and sample cups Wavelength: 340nm, 380nm, 412nm, 450nm, 505nm, 546nm,
Sample volume: 1.5~45 µl, step by 0.1µl 570nm, 605nm, 660nm, 700nm, 740nm, 800nm
Sample probe: Liquid level detection, clot detection and collision protection Absorbance range: 0~3.3Abs (10mm conversion)
Probe cleaning: Interior and exterior automatic probe washing Resolution: 0.0001Abs
carry-over < 0.05%
Automatic sample dilution, Pre-dilution and post-dilution Control and Calibration
Dilution with ratio up to 1: 150 Calibration mode: Linear (one-point, two-point and multi-point),Logit
Dilution vessel: Quartz cuvette -Log 4P, Logit-Log 5P, Spline, exponential, Polynomial,
Parabola
Internal bar code reader Control rules: Westgard multi-rule, Levy-Jennings, Cumulative sum
Sample/Reagent barcode reading check, twin plot
including Codabar, ITF (Interleaved Two of Five), code128, code39,
UPC/EAN, Code93; Bi-directional LIS Interface transmission Operation Unit
Operation system: Windows 8
ISE Module (optional) Interface: RS-232, Network Port, USB/ parallel port
Optional selection of K+, Na+, Cl-
Throughput: Up to 240 tests per hour Working Conditions
Power Supply: 200~240V, 50/60Hz, 1500VA
Reagent Handling or 110~130V, 60Hz, 1500VA
Reagent tray: 80 positions in refrigerated compartment (2~10°C) Temperature: 15~30°C
Reagent volume: 10~350µl Humidity: 35~85%
Reagent probe: Liquid level detection, collision protection and Water consumption: ≤20L/hour, De-ionized water
inventory check Dimension: 1180mm x 710mm x 1150mm (W x D x H)
Probe cleaning: Interior and exterior automatic probe washing Weight: 300 Kg

4
P/N:ENG-BS-490-210285x8-20141212