Ｓａｆｅｔｙ Ｄａｔａ Ｓｈｅｅｔ

Ｒｅｖｉｓｉｏｎ Ｄａｔｅ：ＮＯＶ．５．２０１８

１． Identification of the substance/preparation and company

Product name
ＣＨＥＭＩＣＯＯＬ Ｅ－２１５Ｔ
Use of the substance
Water soluble cutting and grinding fluid
Identification of the company
ＣＨＥＭＩＣ ＣＯ．，Ｌｔｄ．
1-2-1, TECHNOSTAGE, IZUMI-SHI, OSAKA, JAPAN
Emergency telephone number
＋８１－７２５－５１－００３１

２． Hazards identification

GHS classification
Physical Hazards : Not classified or classification not possible.
Health Hazards
Skin corrosive/irritation : Category ２
Serious eye damage/eye irritation : Category ２Ａ
Aspiration hazard : Category １
Environmental Hazards : Not classified or classification not possible.

GHS label elements, including precautionary statements

Pictograms or hazard symbols :

Signal word : Danger

Hazard statements
Causes skin irritation
Causes serious eye irritation
May be fatal if swallowed and enters airways

Precautionary statements
Prevention
Wear protective gloves.
Wear eye/face protection.
Wash hands and face after handling.

1
 Wash eyes after handling.
Responses
If inhaled: Remove to fresh air and keep at rest in a position comfortable for
Breathing.
If you feel unwell, call poison center or doctor/physician.
If on skin: Wash with plenty of soap and water.
Take of contaminated clothing and wash before re-use.
If skin irritation or rash occurs, seek medical advice/attention.
If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing.
If eye irritation persists, get medical advice/attention.
If swallowed: Do not induce vomiting.
Immediately call a poison center or doctor/physician.
Storage
Keep container tightly closed.
Store in a cool/well-ventilated place.
Store locked up.
Disposal
Dispose of contents/container in according with local/regional/national/
international regulation.

３． Composition

Highly refined mineral oil（CAS：６４７４２－５３－６）

Oiliness improver（CAS：２７９２５－０２－６）
Surfactant（CAS:２５３２２－６９－４）
Rust prevention additive（CAS：４５００－２９－２）
Antifoaming agent（CAS:１４０２６００－３７－６）
Sulfurized extreme pressure additive（CAS:７２１６２－３４－６）
Water

４． First aid measures

Inhalation
Remove victim to flesh air and keep at rest in a position comfortable for
breathing.
Get medical advice/attention if you feel unwell.
Skin contact
Remove/take off immediately all contaminated clothing.
Wash contact areas with soap and enough water.
Get medical advice/attention if skin irritation or rush occurs.
Eye contact
Wash off immediately with enough water for several minutes.

2
 Remove contact lenses if present and easy to do.
Get medical advice/attention if eye irritation persists.
Ingestion
Rinse mouth.
Do not induce vomiting.
Get medical advice/attention if you feel unwell.

５． Fire-fighting measures

Appropriate extinguishing media

Use dry chemical, foam, carbon dioxide, water fog.
Inappropriate extinguishing media
No knowledge
Hazardous combustion products
Smoke, fume, oxides of carbon, nitrogen oxides, incomplete combustion products
Fire fighting instructions
Fire-extinguishing work is done from the windward and suitable
fire-extinguishing method according to the surrounding situation is used.
Uninvolved persons should evacuate to a safe place.
Remove movable containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.

６． Accidental release measures

Personal precautions
Use personal protective equipment.
Keep people away from and upwind of spill/leak.
Entry to non-involved personnel should be controlled around the leakage
area by roping off, etc.
Environmental precautions
Prevent product from entering drains.
Methods for containment and cleaning up
Absorb spilled material in a suitable absorbent (e.g. dry sand, sawdust,
rag, earth, papers ,clothes), then place in a chemical waste containers.
Adhered or collected material should be promptly disposed of, in accordance
with appropriate laws and regulations.

７． Handling and storage

Handling
Handling is performed in a well ventilated place.
Wear suitable protective equipment.
Open and handle container with care.
Prevent generation of vapor or mist.
Wash hands and face thoroughly after handling.

3
 Wash eyes thoroughly after handling.
Storage
Keep container tightly closed.
Store in a cool and dark place.
Store away from incompatible materials such as oxidizing agents.
Comply with lows.

８． Exposure controls／personal protection

Exposure limit value

３mg/m3 (mineral oil mist, TWA, Japan OELs-JSOH(2006))
５mg/m3 (mineral oil mist, TWA, ACGIH(2004))
Engineering controls
Install a closed system or local exhaust as possible so that workers should
not be exposed directly.
Install safety shower and eye bath.
Hand protection
Use protective gloves (chemical/oil resistant gloves are recommended).
Eye protection
Use safety glasses with side shields are recommended.
Skin and body protection
Use protective clothing, boots. (chemical/oil resistant clothing, boots are
recommended).

９． Physical and chemical properties

Appearance: Brown liquid

PH: ８．５～１０．５(10%aq)
Viscosity No data available
Melting point: No data available
Boiling point: No data available
Flash point: None
Density: ０．９１～０．９５ｇ／ｃｍ³(at ２０℃)
Solubility: freely soluble in water (emulsify)

１０． Stability and reactivity

Stability
Stable under normal condition and anticipated storage.
Possibility of hazardous reactions
Because this product is alkaline, it may run a fever in response to an acid
material.
This product react with strong oxidizing materials.
Conditions to avoid
Contact with the blend most moving passage hazardous substance.

4
 Incompatible materials
Oxidizing materials, Acid materials
Hazardous decomposition products
On the occasion of combustion, carbon monoxide, a nitrogen oxide are produced.

１１． Toxicological information

Acute toxicity:
Oral LD 50 : It is supposed to be more than 5,000 mg/kg(rat).
Dermal LD 50 : It is supposed to be more than 5,000 mg/kg(rabbit).
Skin and eye corrosion
Skin: Irritation, When come into contact for a long time, may invade various
kinds of organizations of the skin surface and Dermatitis is
caused.
Eye: Irritation to eyes.
Respiratory sensitization: No data available
Skin sensitization: No data available
Germ cell mutagenicity: No data available
Carcinogenicity: No data available
Reproductive toxicity: No data available
Specific target organ toxicity (Single exposure): No data available
Specific target organ toxicity (Repeated exposure): No data available
Aspiration hazard: Homo sapiens causes the absorption to the lungs by an intake
of the mineral oil, and, as a result, there is a report that I bring
oiliness pneumonia or chemical pneumonia. (SDS of the mineral oil)

１２． Ecological information

Eco-toxicity: No data available

Biodegradability: No data available
Bioaccumulation: No data available
Hazardous to the ozone layer: No data available

１３． Disposal considerations

Dispose of contents/container in according with the standard of the law concerned

and the local government.
When a person in response to the authorization such as prefectural governors of
waste industry or a local government takes step, entrust you there and process
it.
When entrust you with disposal of waste, notify processing suppliers of the risk,
hazardousness enough.
When discard an empty container, completely remove contents and perform
appropriate disposal according to the standard of the law concerned and the local
government.

5
 An empty container do not weld, cut, drill and heat up.

１４． Transport information

UN No.: Not listed

Confirm that there are not damage, corrosion, the leak of the container before
transportation.
Perform loading, prevention of the collapse of cargo surely so that there are
not a shock, a fall, damage.
Avoid the violent handling such as a fall, a shock, the drag so that a container
is not damaged.

１５． Regulatory information

Japanese regulatory information

Pollutant Release and Transfer Register (PRTR) : Not correspond
Industrial Safety and Health Law (Notifiable substances) :
Government ordinance number 168: Mineral oil ７５％
Poisonous and Deleterious Substance Control Law : Not correspond
Fire Service Law : Not correspond
Waste Disposal Law : Industrial waste

１６． Other information

Observe national and local legal requirements.

This SDS is necessary to have you use our product safely and is a thing for the
handling that is usually a mark with the thing which gathered up the matter which
you must warn briefly. About the usage of this product, please decide this SDS
in responsibility of user after reference.
We make the mention content based on the knowledge that we got in an investigation
of our best in on the making days such as data shown by GHS danger hazardousness
classification business of NITE or the revision day, but it is not necessarily
enough about data and the evaluation of mention and is not a thing guaranteeing
thoroughness about an evaluation of data and the danger hazardousness of mention.
The contents of SDS may be revised based on the revision of laws and ordinances
and new knowledge.